Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Map Sheet”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources
USGS1949

Interpreting ground conditions from geologic maps

Intelligent planning for heavy construction, water supply, or other land utilization requires advance knowledge of ground conditions in the area. It is essential to know: the topography, that is, the configuration of the land surface; the geology and soils, that is, the deposits that compose the land and its weathered surface; and the hydrology, that is, the occurrence of water whether under or on the ground. These elements usually are considered in planning land developments that involve much investment; detailed surveys generally are made of the topography, geology, soils, and hydrology at the site selected for development. Such detailed surveys are essential, but equally essential and often overlooked is the need for general surveys prior to site selection. Only if the general surveys have been made is it possible to know that a particular site is most suitable for the purpose and that no situations in the tributary areas that might affect the project have been overlooked. Moreover, the general regional relations must be known in order to properly interpret the geology, soils, and hydrology at a particular locality. In brief, both the general and the specific are needed in order to avoid costly mistakes either during or after development. The accompanying maps illustrate how a general geologic map can be used for interpreting grc .d conditions during a planning stage prior to site selection. The topographic and geologic maps, which provide the basic data, have been simplified from some existing ones. The interpretive sheets are intended to provide some examples of the kinds of information that trained persons can read from such basic maps.

Circular↗
USGS2013

U.S. Geological Survey water resources Internet tools

The U.S. Geological Fact Sheet (USGS) provides a wealth of information on hydrologic data, maps, graphs, and other resources for your State. Sources of water resources information are listed below. WaterWatch WaterQualityWatch Groundwater Watch WaterNow WaterAlert USGS Flood Inundation Mapper National Water Information System (NWIS) StreamStats National Water Quality Assessment (NAWOA)

Fact Sheet↗
USGS2014

Baseline coastal oblique aerial photographs collected from Breton Island, Louisiana, to the Alabama-Florida border, July 13, 2013

The U.S. Geological Survey (USGS) conducts baseline and storm response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms. On July 13, 2013, the USGS conducted an oblique aerial photographic survey from Breton Island, Louisiana, to the Alabama-Florida border, aboard a Cessna 172 flying at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect baseline data for assessing incremental changes since the last survey, and the data can be used in the assessment of future coastal change. The images provided here are Joint Photographic Experts Group (JPEG) images. ExifTtool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the configuration of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segements can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. Table 1 provides detailed information about the GPS location, name, date, and time each of the 1242 photographs taken along with links to each photograph. The photography is organized into segments, also referred to as contact sheets, and represent approximately 5 minutes of flight time. (Also see the Photos and Maps page). In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files.

Alabama;Florida;Louisiana;Mississippi↗
USGS2014

Baseline coastal oblique aerial photographs collected from Dauphin Island, Alabama, to Breton Island, Louisiana, August 8, 2012

The U.S. Geological Survey (USGS) conducts baseline and storm response photography missions to document and understand the changes in vulnerability of the Nation's coasts to extreme storms. On August 8, 2012, the USGS conducted an oblique aerial photographic survey from Dauphin Island, Alabama, to Breton Island, Louisiana, aboard a Cessna 172 at an altitude of 500 feet (ft) and approximately 1,000 ft offshore. This mission was flown to collect baseline data for assessing incremental changes since the last survey, and the data can be used in the assessment of future coastal change. The images provided here are Joint Photographic Experts Group (JPEG) images. Exiftool was used to add the following to the header of each photo: time of collection, Global Positioning System (GPS) latitude, GPS longitude, keywords, credit, artist (photographer), caption, copyright, and contact information. The photograph locations are an estimate of the position of the aircraft and do not indicate the location of any feature in the images (see the Navigation Data page). These photographs document the configuration of the barrier islands and other coastal features at the time of the survey. Pages containing thumbnail images of the photographs, referred to as contact sheets, were created in 5-minute segments of flight time. These segements can be found on the Photos and Maps page. Photographs can be opened directly with any JPEG-compatible image viewer by clicking on a thumbnail on the contact sheet. Table 1 provides detailed information about the GPS location, name, date, and time each of the 1241 photographs taken along with links to each photograph. The photography is organized into segments, also referred to as contact sheets, and represent approximately 5 minutes of flight time. (Also see the Photos and Maps page). In addition to the photographs, a Google Earth Keyhole Markup Language (KML) file is provided and can be used to view the images by clicking on the marker and then clicking on either the thumbnail or the link above the thumbnail. The KML files were created using the photographic navigation files.

Alabama;Louisiana↗
USGS2007

Modeling englacial radar attenuation at Siple Dome, West Antarctica, using ice chemistry and temperature data

The radar reflectivity of an ice-sheet bed is a primary measurement for discriminating between thawed and frozen beds. Uncertainty in englacial radar attenuation and its spatial variation introduces corresponding uncertainty in estimates of basal reflectivity. Radar attenuation is proportional to ice conductivity, which depends on the concentrations of acid and sea-salt chloride and the temperature of the ice. We synthesize published conductivity measurements to specify an ice-conductivity model and find that some of the dielectric properties of ice at radar frequencies are not yet well constrained. Using depth profiles of ice-core chemistry and borehole temperature and an average of the experimental values for the dielectric properties, we calculate an attenuation rate profile for Siple Dome, West Antarctica. The depth-averaged modeled attenuation rate at Siple Dome (20.0 ?? 5.7 dB km-1) is somewhat lower than the value derived from radar profiles (25.3 ?? 1.1 dB km-1). Pending more experimental data on the dielectric properties of ice, we can match the modeled and radar-derived attenuation rates by an adjustment to the value for the pure ice conductivity that is within the range of reported values. Alternatively, using the pure ice dielectric properties derived from the most extensive single data set, the modeled depth-averaged attenuation rate is 24.0 ?? 2.2 dB km-1. This work shows how to calculate englacial radar attenuation using ice chemistry and temperature data and establishes a basis for mapping spatial variations in radar attenuation across an ice sheet. Copyright 2007 by the American Geophysical Union.

Journal of Geophysical Research F: Earth Surface↗
USGS1903

Drainage modifications in southeastern Ohio and adjacent parts of West Virginia and Kentucky

The field work upon which this paper is based was carried on intermittently for several years. During the season of 1899 the work in Washington County, Ohio, was conducted under the direction of the Ohio State Academy of Science, the expenses being covered by a grant from the Emerson McMillin special research fund. The field work of the season of 1900 was done under the direction of Dr. T. C. Chamberlin, chief of the Division of Pleistocene Geology of the United States Geological Survey, and to him the author is greatly indebted for many valuable suggestions in relation to the work, and for an extended correspondence concerning the interpretations, during the preparation of this report. The study of this particular region was the natural result of earlier studies of drainage modifications in Ohio, in the region more nearly adjacent to the glaciated area. Until a few years ago but very little systematic study of the drainage features of Ohio had been made. It is not intended at present to make a complete review of the early literature, but to refer only to such portions of it as bear directly on the problem in hand. On account of the lack of good maps of Ohio it has not been possible to make the maps which accompany this paper as accurate as might be desired. They have been constructed from various published maps and from personal observations in the field; and, while they are not strictly accurate, it is hoped that they will set forth the facts with reference to the drainage modifications with sufficient clearness to enable anyone to follow the features in the field, or to serve for purposes of correlation. The map of Flatwoods and Teays valleys has been constructed from four topographic sheets of the United States Geological Survey Ironton, Kenova, Huntington, and Charleston. The author is under obligations to Mr. H. M. Wilson, geographer of the Survey, for data furnished from the unpublished map of the Kenova quadrangle. The photographs illustrating the report were all taken by the author.

Kentucky, Ohio, West Virginia↗
USGS2025

Geologic map of the Greater Antilles and Virgin Islands

Introduction The geologic map of the Greater Antilles and Virgin Islands is a compilation of information from the literature, integrated to provide a seamless geologic map of the region. This map was prepared to serve as a base map for a mineral resource assessment of the region. Several small-scale regional geologic maps of the region have been prepared in the past. This report supersedes an earlier version of the geologic map of the Greater Antilles and the Virgin Islands that was released as U.S. Geological Survey (USGS) Open-File Report 2019–1036. For this report, the regional geologic overview shown on sheet 1 covers Cuba; the island of Hispaniola, which includes Haiti and Dominican Republic; Jamaica; the Cayman Islands; Puerto Rico; and the U.S. and British Virgin Islands. Sheet 2 shows the geology of Cuba and Cayman Islands, sheet 3 the geology of Jamaica, sheet 4 the geology of Hispaniola, and sheet 5 the geology of Puerto Rico and Virgin Islands. Accompanying the maps are three tables: table 1 lists the map units (in alphabetical order by map-unit label), their ages, and the countries or territories in which they can be found. These are listed in alphabetical order for ease in locating unit names from the symbols on the maps. Table 2 is a list of sources for the geologic map compilation of Puerto Rico. Table 3 shows formations in the Devil’s Race Course Group of Jamaica.

Greater Antilles, Virgin Islands↗
USGS2012

Global map of eolian features on Mars

Ten basic categories of eolian features on Mars were identified from a survey of Mariner 9 and Viking orbiter images. The ten features mapped are (1) light streaks (including frost streaks), (2) dark streaks, (3) sand sheets or splotches, (4) barchari dunes, (5) transverse dunes, (6) crescentic dunes, (7) anomalous dunes, (8) yardangs, (9) wind grooves, and (10) deflation pits. The features were mapped in groups, not as individual landforms, and recorded according to their geographic positions and orientations on maps of 1:12.5 million or 1:25 million scale. In the north polar region, light and dark streaks indicate winds from the west and northwest. Frost streaks show northeast and northwest winds. Barchan dunes show southwest and west winds. Transverse dunes show east and west winds. Local erosional features show winds from the northwest or southeast and northeast or southwest. In the middle and low northern latitudes, streaks show northeast winds; yardangs and deflation pits show mostly easterly and northeasterly winds. In the low southern latitudes, light streaks and dunes record northwest and northeast winds; dark streaks record southeast winds. In high southern latitudes, most streaks and dunes record southeast and east winds. In the south polar region, light and frost streaks record southwest and northwest winds, whereas dark streaks and transverse dunes show southeast winds. The patterns recorded for ephemeral features conform to global conditions of strong southern spring and summer (northern fall and winter) wind circulation. Erosional features in bedrock indicate long-term and perhaps ancient wind trends, whereas depositional features may record relatively more recent winds. Wind directions indicated by yardangs, pits, and other erosional features seldom correspond to those shown by streaks. These erosional features indicating winds of different directions than those that formed the streaks may have been carved when the effective regional winds on Mars were different due to relative hemisphere insolation differences, which are related to obliquity variations. Alternatively, many yardangs and pits may be largely controlled by structure and carved along surface structural patterns or features that channeled both ancient and present-day winds. Deflation pits in the mantled terrain may contain the best record of ancient wind trends. These pits seem to have stratigraphically related orientations. Different stratigraphic units composing the mantle contain wind erosion pits that possibly record large-scale wind direction changes because of long-term changes in the obliquity of the Mars.

Journal of Geophysical Research Solid Earth↗
USGS2000

Digital geologic map of the Coeur d'Alene 1:100,000 quadrangle, Idaho and Montana

Between 1961 and 1969, Alan Griggs and others conducted fieldwork to prepare a geologic map of the Spokane 1:250,000 map (Griggs, 1973). Their field observations were posted on paper copies of 15-minute quadrangle maps. In 1999, the USGS contracted with the Idaho Geological Survey to prepare a digital version of the Coeur d’Alene 1:100,000 quadrangle. To facilitate this work, the USGS obtained the field maps prepared by Griggs and others from the USGS Field Records Library in Denver, Colorado. The Idaho Geological Survey (IGS) digitized these maps and used them in their mapping program. The mapping focused on field checks to resolve problems in poorly known areas and in areas of disagreement between adjoining maps. The IGS is currently in the process of preparing a final digital spatial database for the Coeur d’Alene 1:100,000 quadrangle. However, there was immediate need for a digital version of the geologic map of the Coeur d’Alene 1:100,000 quadrangle and the data from the field sheets along with several other sources were assembled to produce this interim product. This interim product is the digital geologic map of the Coeur d’Alene 1:100,000 quadrangle, Idaho and Montana. It was compiled from the preliminary digital files prepared by the Idaho Geological, and supplemented by data from Griggs (1973) and from digital databases by Bookstrom and others (1999) and Derkey and others (1996). The resulting digital geologic map (GIS) database can be queried in many ways to produce a variety of geologic maps. Digital base map data files (topography, roads, towns, rivers and lakes, etc.) are not included: they may be obtained from a variety of commercial and government sources. This database is not meant to be used or displayed at any scale larger than 1:100,000 (e.g., 1:62,500 or 1:24,000). The digital geologic map graphics (of00-135_map.pdf) that are provided are representations of the digital database. The map area is located in north Idaho. This open-file report describes the geologic map units, the methods used to convert the geologic map data into a digital format, the ArcInfo GIS file structures and relationships, and explains how to download the digital files from the U.S. Geological Survey public access World Wide Web site on the Internet.

Idaho, Montana↗
USGS2001

Surficial geologic map of the greater Omaha area, Nebraska and Iowa

Geologic mapping, in support of the USGS Omaha-Kansas City Geologic Mapping Project, shows the spatial distribution of artificial-fill, alluvial, eolian, and glacial deposits and bedrock in and near Omaha, Nebraska. Artificial fill deposits are mapped chiefly beneath commercial structures, segments of interstate highways and other major highways, railroad tracks, airport runways, and military facilities, and in landfills and earth fills. Alluvial deposits are mapped beneath flood plains, in stream terraces, and on hill slopes. They include flood-plain and stream-channel alluvium, sheetwash alluvium, and undivided sheetwash alluvium and stream alluvium. Wind-deposited loess forms sheets that mantle inter-stream areas and late Wisconsin terrace alluvium. Peoria Loess is younger of the two loess sheets and covers much of the inter-stream area in the map area. Loveland Loess is older and is exposed in a few small areas in the eastern part of the map area. Glacial deposits are chiefly heterogeneous, ice-deposited, clayey material (till) and minor interstratified stream-deposited sand and gravel. Except for small outcrops, glacial deposits are covered by eolian and alluvial deposits throughout most of the map area. Bedrock is locally exposed in natural exposures along the major streams and in quarries. It consists of Dakota Sandstone and chiefly limestone and shale of the Lansing and Kansas City Groups. Sand and gravel in flood plain and stream-channel alluvium in the Platte River valley are used mainly for concrete aggregate. Limestone of the Lansing and Kansas City Groups is used for road-surfacing material, rip rap, and fill material.

Iowa, Nebraska↗
USGS1904

Water resources of the Philadelphia district

The area included in the Philadelphia district lies between 39° 45' and 40° 15' north latitude and 75° and 75° 30' west longitude. It has a length of 34.50 miles from north to south and a width of 26.53 miles from east to west, and covers one-fourth of a square degree, which is equivalent, in that latitude, to, about 915.25 square miles. It is mapped on the Germantown, Norristown, Philadelphia, and Chester atlas sheets of the United States Geological Survey. a Each of these sheets represents a tract fifteen minutes in extent each way. This district is in Pennsylyania, New Jersey, and Delaware, and comprises, in whole or in part, ten counties-Bucks, Montgomery, Philadelphia, Delaware, and Chester counties in Pennsylvania; Burlington, Camden, Gloucester, and Salem counties in New Jersey; and Newcastle County in Delaware. A population of nearly 2,000,000 is embraced within these limits. The location and general relations of the district are shown in fig. 1, on the next page. In this paper will be discussed the topography, rainfall, run-off, and stream discharges of the chief hydrographic basins, the geology and water-bearing horizons, and the water power and water supply in relation to its present and future utilization.

Water Supply Paper↗
USGS2015

Impacts of climate change on the formation and stability of late Quaternary sand sheets and falling dunes, Black Mesa region, southern Colorado Plateau, USA

Detailed geomorphic mapping and analysis of soil-stratigraphy and optically stimulated luminescence (OSL) dating of eolian sand dunes on Black Mesa, Arizona, reveal eolian sediment deposition occurred from 30 to 16 ka, followed by a period of widespread dune stabilization from 12 to 8 ka. Localized reactivation of the previously stabilized dune forms or local changes in sediment supply have occurred in the middle to late Holocene in this region. Cooler, wetter, and more variable climatic conditions during MIS 3 and 2 led to increased channel and floodplain sediment supply. Eolian sediment derived from these sources was transported up to 60 km. Deposition of this material has reduced regional topographic roughness by filling tributary canyon ‘traps’ oriented perpendicular to the dominant wind and sediment transport direction. Topographically controlled falling dunes and sand ramps in this region are preserved because of their geomorphic position and provide evidence of the paleoenvironmental state of the fluvial and eolian systems before, during, and immediately after the last glacial maximum on the southern Colorado Plateau. Widely used predictive models of eolian system dynamics are typically based entirely on climatic variables and do not account for landscape complexity and geomorphic history. Climate-only assumptions fail to give accurate predictions of the dynamics of this and many other dune fields. A growing body of work suggests that eolian deposits in wind-driven semiarid climates may be more strongly related to increases in sediment supply than to increases in aridity.

Arizona↗
USGS2009

Integrating GIS-based geologic mapping, LiDAR-based lineament analysis and site specific rock slope data to delineate a zone of existing and potential rock slope instability located along the grandfather mountain window-Linville Falls shear zone contact, Southern Appalachian Mountains, Watauga County, North Carolina

Landslide hazard maps of Watauga County identify >2200 landslides, model debris flow susceptibility, and evaluate a 14km x 0.5km zone of existing and potential rock slope instability (ZEPRSI) near the Town of Boone. The ZEPRSI encompasses west-northwest trending (WNWT) topographic ridges where 14 active/past-active rock/weathered rock slides occur mainly in rocks of the Grandfather Mountain Window (GMW). The north side of this ridgeline is the GMW / Linville Falls Fault (LFF) contact. Sheared rocks of the Linville Falls Shear Zone (LFSZ) occur along the ridge and locally in the valley north of the contact. The valley is underlain principally by layered granitic gneiss comprising the Linville Falls/Beech Mountain/Stone Mountain Thrust Sheet. The integration of ArcGIS??? - format digital geologic and lineament mapping on a 6m LiDAR (Light Detecting and Ranging) digital elevation model (DEM) base, and kinematic analyses of site specific rock slope data (e.g., presence and degree of ductile and brittle deformation fabrics, rock type, rock weathering state) indicate: WNWT lineaments are expressions of a regionally extensive zone of fractures and faults; and ZEPRSI rock slope failures concentrate along excavated, north-facing LFF/LFSZ slopes where brittle fabrics overprint older metamorphic foliations, and other fractures create side and back release surfaces. Copyright 2009 ARMA, American Rock Mechanics Association.

Conference Paper↗
USGS2011

The National Map

Explore the source record for details and available documents.

Fact Sheet↗
USGS1997

Satellite image maps of Pakistan

Georeferenced Landsat satellite image maps of Pakistan are now being made available for purchase from the U.S. Geological Survey (USGS). The first maps to be released are a series of Multi-Spectral Scanner (MSS) color image maps compiled from Landsat scenes taken before 1979. The Pakistan image maps were originally developed by USGS as an aid for geologic and general terrain mapping in support of the Coal Resource Exploration and Development Program in Pakistan (COALREAP). COALREAP, a cooperative program between the USGS, the United States Agency for International Development, and the Geological Survey of Pakistan, was in effect from 1985 through 1994. The Pakistan MSS image maps (bands 1, 2, and 4) are available as a full-country mosaic of 72 Landsat scenes at a scale of 1:2,000,000, and in 7 regional sheets covering various portions of the entire country at a scale of 1:500,000. The scenes used to compile the maps were selected from imagery available at the Eros Data Center (EDC), Sioux Falls, S. Dak. Where possible, preference was given to cloud-free and snow-free scenes that displayed similar stages of seasonal vegetation development. The data for the MSS scenes were resampled from the original 80-meter resolution to 50-meter picture elements (pixels) and digitally transformed to a geometrically corrected Lambert conformal conic projection. The cubic convolution algorithm was used during rotation and resampling. The 50-meter pixel size allows for such data to be imaged at a scale of 1:250,000 without degradation; for cost and convenience considerations, however, the maps were printed at 1:500,000 scale. The seven regional sheets have been named according to the main province or area covered. The 50-meter data were averaged to 150-meter pixels to generate the country image on a single sheet at 1:2,000,000 scale

Fact Sheet↗
USGS2019

Bathymetry and geomorphology of Shelikof Strait and the western Gulf of Alaska

We defined the bathymetry of Shelikof Strait and the western Gulf of Alaska (WGOA) from the edges of the land masses down to about 7000 m deep in the Aleutian Trench. This map was produced by combining soundings from historical National Ocean Service (NOS) smooth sheets (2.7 million soundings); shallow multibeam and LIDAR (light detection and ranging) data sets from the NOS and others (subsampled to 2.6 million soundings); and deep multibeam (subsampled to 3.3 million soundings), single-beam, and underway files from fisheries research cruises (9.1 million soundings). These legacy smooth sheet data, some over a century old, were the best descriptor of much of the shallower and inshore areas, but they are superseded by the newer multibeam and LIDAR, where available. Much of the offshore area is only mapped by non-hydrographic single-beam and underway files. We combined these disparate data sets by proofing them against their source files, where possible, in an attempt to preserve seafloor features for research purposes. We also attempted to minimize bathymetric data errors so that they would not create artificial seafloor features that might impact such analyses. The main result of the bathymetry compilation is that we observe abundant features related to glaciation of the shelf of Alaska during the Last Glacial Maximum including abundant end moraines, some medial moraines, glacial lineations, eskers, iceberg ploughmarks, and two types of pockmarks. We developed an integrated onshore–offshore geomorphic map of the region that includes glacial flow directions, moraines, and iceberg ploughmarks to better define the form and flow of former ice masses.

Alaska↗
USGS1901

Profiles of rivers in the United States

The profiles here represented are derived from various sources and differ from one another greatly in accuracy. Many of them are drawn from the annual reports of the Chief of Engineers, U.S.A., under which are included the reports of the Mississippi and Missouri River commissions. The heights thus obtained are those of the level of water in the rivers at certain stages, and may be regarded as of great accuracy. Others have been obtained from railroad profiles, being the level of the rivers at points where the railroads touch or cross them. Still others have been taken from the atlas sheets of the United States Geological Survey and from other maps. In most such cases the points at which the contours cross the rivers upon the maps have been taken. These again differ in point of accuracy with the means adopted for the location of the contours. Where the spirit level was used in locating contours it may be assumed that the determinations are fairly good, but where the barometer was used the probable error may be of considerable magnitude. Such elevations are, however, mainly in the mountainous parts of the country, where the fall of the streams is great, and where, therefore, errors of considerable magnitude may be tolerated, as affecting but little the form of the profile.

Water Supply Paper↗
USGS2020

Geochronologic age constraints on tectonostratigraphic units of the central Virginia Piedmont, USA

New geologic mapping coupled with uranium-lead (U-Pb) zircon geochronology (sensitive high-resolution ion microprobe-reverse geometry [SHRIMP-RG] and laser ablation-inductively coupled plasma-mass spectrometry [LA-ICP-MS]) analyses of 10 samples, provides new constraints on the tectonostratigraphic framework of the central Virginia Piedmont. Detrital zircon analysis confirms that the Silurian-Devonian Quantico Formation is a postorogenic successor basin, with zircons derived primarily from Ordovician Chopawamsic Formation volcanic rocks. Detrital zircons from strata of the Long Island syncline, previously mapped as a separate successor basin, have a peri-Gondwanan component distinct from Laurentian-sourced rocks of the Potomac terrane to the west. Volcanism of the Chopawamsic Formation spanned at least 14 million years during the Ordovician. The Chopawamsic Formation contains sheet-like Late Ordovician-Silurian granodioritic and tonalitic intrusions that were once mapped as Carboniferous. Biotite-muscovite migmatitic paragneiss, which borders the Chopawamsic Formation on its southeast side and also occurs east of the Lakeside fault, preserves evidence of Silurian deformation and metamorphism, with a Carboniferous (Alleghanian) overprint. Limited SHRIMP-RG analysis of detrital zircons from this paragneiss yields a Laurentian (Mesoproterozoic) signature, which suggests that the structurally concordant contact between volcanic rocks of the Chopawamsic Formation and paragneiss is either a pre-Alleghanian fault or an unconformity.

Virginia↗