Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Gas Science and Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,693 records · Page 21Linked to original sources
USGS2024

Framework for implementing damping scaling factors in U.S. Geological Survey National Seismic Hazard Models

Traditionally, probabilistic seismic hazard analysis (PSHA) has focused on calculating ground motion hazard curves for elastic, 5%-damped pseudo spectral accelerations, Sa(T,5%), which are used as the basis for engineering design parameters and targets for ground motion selection and modification. However, structures and geotechnical systems can exhibit a wide range of damping ratios both above and below the 5% level, depending on the construction material, structural system, nonstructural elements, or subsurface soil properties. When spectral parameters at such damping levels are required for certain applications, 5%-damped accelerations have traditionally been extracted from PSHA-based hazard curves and adjusted outside of the hazard integral using damping scaling factors (DSF) such as those from Newmark & Hall (1982). Recent advances in the development of more rigorous and comprehensive damping scaling models (e.g., Rezaeian et al., 2014; Rezaeian et al., 2021) have allowed for the modeling of means and standard deviations of DSFs as functions of earthquake source and path properties for crustal, intraslab, and subduction interface tectonic environments. These DSF models can be applied to ground motion model (GMM) estimates of Sa(T,5%) for a given earthquake rupture scenario to produce a corresponding mean and standard deviation Sa at a specified damping ratio β, Sa(T,β). In this study, the DSF models of Rezaeian et al. (2014) and Rezaeian et al. (2021) are implemented within the U.S. Geological Survey National Seismic Hazard Model (NSHM) PSHA framework to calculate probabilistic hazard curves for spectral accelerations at damping ratios from 0.5% to 30%. The DSF models are applied directly to the mean and standard deviation of Sa(T,5%) predictions from each GMM in the NSHM logic tree. Resulting hazard curves and uniform hazard and risk spectra for Sa(T,β) are presented for several geographic locations and compared with corresponding spectra estimated using current design practices by applying the same DSFs outside of the PSHA calculation. Key differences between the two methods for estimating Sa(T,β) are discussed, and potential strategies are presented for the implementation and usage of the hazard-consistent Sa(T,β) in building codes. Comparing the results to those from DSFs used in current design practices that are mainly based on Newmark & Hall (1982) is not explored in this study.

Conference Paper↗
USGS2026

The Great Lakes Geologic Mapping Coalition—Working collaboratively to understand the geology of the Great Lakes Region

Introduction The Great Lakes Geologic Mapping Coalition (GLGMC), commonly referred to as the “Coalition,” is a partnership between the U.S. Geological Survey (USGS), the U.S. States of Illinois, Indiana, Michigan, Minnesota, New York, Ohio, Pennsylvania, and Wisconsin and the Canadian province of Ontario. The member States receive funding for geologic mapping work from the USGS National Cooperative Geologic Mapping Program (NCGMP), whereas Ontario participates as a nonfunded partner. The mission of the GLGMC is to produce three-dimensional (3D) geologic maps that depict unconsolidated sediments and near-surface bedrock in the Great Lakes region of North America. Geologic maps are the basis of most earth science investigations and help support resource exploration (energy, minerals, groundwater), natural hazard mitigation, infrastructure development, and land-use planning, all of which can be used to advance economic development and strengthen national security in the Great Lakes region. During the last few million years, the Great Lakes region has experienced repeated glacial advances and retreats, leaving behind extensive sediments, abundant natural resources, and widespread effects on the underlying bedrock geology (Swezey and others, 2022). Linked by shared histories of past glaciations, industrial agriculture, and legacy automotive, coal, steel, and manufacturing industries, the GLGMC member States collaborate to improve the understanding of the 3D distribution of the sediments overlying the region’s bedrock (fig. 1). Developing a comprehensive subsurface 3D framework of this glaciated terrain can provide earth science data to policymakers at all levels. These insights facilitate informed decisions on the exploration, use, and protection of vital resources, such as critical minerals, industrial materials, and aquifers, thereby supporting economic prosperity and the well-being of the citizens of this region. Since its inception in 1998, the Coalition has completed more than 100 geologic mapping projects across the Great Lakes region. Each project aims to deliver geologic maps, 3D datasets, and other information that improves understanding of the geology of the Great Lakes region, with an emphasis on economic and water resources. Key deliverables include 3D geologic maps and models typically portraying sediment thickness, often derived from top-of-bedrock and borehole data. These products are developed through a combination of fieldwork, subsurface modeling, and the collection and analysis of rock and sediment cores. To support Coalition goals, member States collaborate with scientists working on related STATEMAP, EDMAP, and FEDMAP projects. Coalition scientists also engage with Tribal Nations in the Great Lakes region to ensure that Tribal interests pertaining to Coalition work are addressed. Through this collaboration, the Coalition unites the efforts of State, Federal, and Tribal Nation stakeholders to advance geologic data production and enhance understanding of the geologic resources of the Great Lakes region.

Illinois, Indiana, Michigan, Minnesota, New York, ↗
USGS2026

2025 USGS National Seismic Hazard Model for Puerto Rico and the U.S. Virgin Islands: Overview of model and hazard results

The U.S. Geological Survey recently updated the National Seismic Hazard Model (NSHM) for Puerto Rico and the U.S. Virgin Islands (PRVI). The first version of the PRVI NSHM was released in 2003, and therefore this 2025 update includes over 20 years of new geologic, geophysical, and engineering data, methods, and models. Updates follow similar efforts performed in the recent 2023 50-state NSHM. However, this is the first NSHM in which we: (1) apply an inversion methodology to subduction interface fault sources in the earthquake rupture forecast (ERF) model; (2) develop scaled backbone median ground-motion models and independent aleatory variability models that are applied in the ground-motion characterization (GMC) model; and (3) calculate epistemic uncertainty related to alternative scenarios in the ERF and GMC models for all grid points in the study region. Long-term time-independent mean hazard calculations were performed for peak ground acceleration and 5%-damped pseudospectral acceleration at 21 spectral periods from 0.01- to 10.0-s, for eight National Earthquake Hazards Reduction Program site conditions ranging from V S30 = 150 to 1500 m/s, and for 2%, 5%, and 10% in 50-year probabilities of exceedance (return periods of 2475, 975, and 475 years, respectively). Epistemic uncertainty, in the form of selected percentiles, is also provided for a suite of test sites and all grid points in the study region for limited periods, site conditions, and probabilities of exceedance. Selected results, including comparisons with the 2003 PRVI NSHM, are shown and discussed for selected periods, site conditions, and probabilities of exceedance. When comparing the 2025 PRVI NSHM with the 2003 PRVI NSHM, hazard is generally higher at shorter periods and lower at longer periods, as a result of updates in both ERF and GMC models. The 2025 PRVI NSHM is applicable for return periods greater than ∼475 or less than ∼10,000 years.

Puerto Rico, U.S. Virgin Islands↗
USGS2025

Pediment formation and subsequent erosion in Gale crater: Clues to the climate history of Mars

Evidence of paleo-rivers, fans, deltas, lakes, and channel networks across Mars has prompted much debate about what climate conditions would permit the formation of these surface water derived features. Pediments, gently sloping erosional surfaces of low relief developed in bedrock, have also been identified on Mars. On Earth, these erosional landforms, often thought to be created by overland flow and shallow channelized runoff, are typically capped by fluvial sediments, and thus in exceptionally arid regions, pediments are interpreted to record past wet periods. Here we document the Greenheugh pediment in Gale crater, exploiting the observational capability of the Curiosity rover. The absence of a fluvial cap suggests that the pediment was likely cut by wind erosion, not fluvial processes. The pediment was then buried by an aeolian deposit (Stimson sandstone) that mantled the lower footslopes of Aeolis Mons (informally known as Mt. Sharp). This burial terminated active wind erosion, preserving the pediment surface (as an angular unconformity). Groundwater was present prior-to, during, and shortly after Stimson deposition, perhaps contributing to lithification and certainly to early diagenesis. Post lithification, wind erosion first cut canyons in the northern most footslopes (north of Vera Rubin ridge). Unlithified gravels were deposited in these canyons, likely due to runoff from Mt. Sharp. Boulder-rich fluvial and debris flow deposits built a > 70 m thick sequence (Gediz Vallis ridge) on the southern Greenheugh pediment. Continued wind erosion left elevated patches of gravel on the northern footslopes, and exposure age dating shows that erosion essentially ceased before 1 Ga (but possibly much earlier). Erosion to the south led to emergence of Vera Rubin ridge, retreat of the Greenheugh pediment, and the formation of Glen Torridon valley. Hence, this footslope environment of Mt. Sharp records climate-driven periods of wind erosion, aeolian deposition (and groundwater activity), surface runoff and sediment deposition, followed by further significant wind erosion that declined to present very slow rates. This likely occurred during the late Hesperian and possibly into the Amazonian.

Icarus↗
USGS2024

Mesoproterozoic to Paleozoic tectonics, Pleistocene landforms, and Holocene seismicity in the Blue Ridge: Results from integrated studies of the 9 August 2020, Mw 5.1 earthquake area near Sparta, North Carolina, USA

This field trip examines the results of integrated geologic studies of the 9 August 2020, M w 5.1 earthquake near Sparta, North Carolina, USA. The earthquake generated ~4 km of coseismic surface rupture of the Little River fault and uplifted a surface area of ~11 km 2 . The Little River fault is a thrust fault oriented 110–130°/45–70°SW, and mapped fault segments are en echelon with scarp heights from <5–30 cm. The epicenter is in polydeformed rocks of the Ashe and Alligator Back Metamorphic Suites in the eastern Blue Ridge. Bedrock structure formed during multiple Paleozoic orogenies; the regional foliation strikes NE-SW and dips SE (mean orientation 063°/52°SE). Mapping identified late Paleozoic veins and shear zones, a regional joint set striking 330–340° and 250–240°, and brittle faults that cut the Paleozoic foliation. Brittle faults oriented similar to the Little River fault are mapped up to 4 km along strike from the coseismic rupture along Bledsoe Creek valley, and the combined length of the Little River fault system is ~8 km. Paleoseismic trenches across the Little River fault corroborate the reactivation of an older fault by the 2020 earthquake and reveal two events during late Pleistocene (<50 ka). Surficial mapping identified several terrace deposits, including a deposit along Bledsoe Creek that yielded a 26 Al/ 10 Be isochron burial age of 0.46 ± 0.13 Ma and overlies a brittle fault, thus constraining the timing of movement of the fault at that location. Paleoliquefaction studies document soft-sediment deformation features in alluvium that may represent paleoseismic events. Collectively, these results highlight long-lived paleoseismicity of the Blue Ridge and that the 9 August 2020 earthquake reactivated an older, suitably oriented brittle fault in the bedrock. The Little River fault is an example of a previously unknown but active fault lying outside of known seismic zones with demonstrated recurrence of paleo-ruptures, raising questions about the assumption that damaging earthquakes are limited to areas of ongoing background seismicity, which is counter to seismic hazard assessments in the eastern United States. Bedrock mapping separates eastern Blue Ridge lithostratigraphy of the Lynchburg Group and Ashe and Alligator Back Metamorphic Suites into separate fault-bound packages juxtaposed over various 1.3–1.0 Ga basement rocks of the northern French Broad massif by the Gossan Lead fault.

North Carolina↗
USGS2024

Earthquake scenario development in conjunction with the 2023 USGS National Seismic Hazard Model

We present earthquake scenarios developed to accompany the release of the 2023 update to the US Geological Survey National Seismic Hazard Model (NSHM). Scenarios can serve a range of local and regional needs, from developing proactive-targeted mitigation strategies for minimizing impending risk to aiding emergency management planning. These deterministic scenarios can also be used to communicate seismic hazard and risk to audiences who are not well versed in methods, such as probabilistic seismic hazard analyses. Specifically, we discuss the scenarios developed, challenges, and lessons learned in the development process, and how this work aided the development of the 2023 NSHM itself. In total, 28 scenarios were developed for Hawaii, Utah, Alaska, and Virginia considering the 2023 NSHM science, past scenario efforts, and input from local experts and stakeholders. Finally, we investigate how NSHM modeling decisions can change estimated impacts to Utah and Hawaii in more detail showing, for example, that a shallower dip of the Wasatch fault under Salt Lake City can increase predicted ground-motion intensities and therefore estimated losses and deaths.

Earthquake Spectra↗
USGS2024

Methods for quantifying interactions between groundwater and surface water

Driven by the need for integrated management of groundwater (GW) and surface water (SW), quantification of GW–SW interactions and associated contaminant transport has become increasingly important. This is due to their substantial impact on water quantity and quality. In this review, we provide an overview of the methods developed over the past several decades to investigate GW–SW interactions. These methods include geophysical, hydrometric, and tracer techniques, as well as various modeling approaches. Different methods reveal valuable information on GW–SW interactions at different scales with their respective advantages and limitations. Interpreting data from these techniques can be challenging due to factors like scale effects, heterogeneous hydrogeological conditions, sediment variability, and complex spatiotemporal connections between GW and SW. To facilitate the selection of appropriate methods for specific sites, we discuss the strengths, weaknesses, and challenges of each technique, and we offer perspectives on knowledge gaps in the current science.

Annual Review of Environment and Resources↗
USGS2025

Variable partitioning of lithium in rhyolitic melt during decompression and ascent

The partitioning behavior of Li in magmatic systems is increasingly being investigated due to the economic importance of Li in the transition to sustainable energy resources (e.g., batteries). However, at upper crustal pressures, it remains uncertain whether Li preferentially partitions into the vapor or liquid (brine) phase or remains in the silicate melt. This complicates our ability to determine where Li resides—silicate melt, minerals, or fluid phase—upon eruption, a crucial factor for understanding its postdepositional movement and concentration into a brine or volcano-sedimentary deposit. Here, we present a novel investigation into the behavior of Li within natural evolved melts during continuous magma decompression and ascent using melt embayments (open melt inclusions). Mineral-hosted melt embayments preserve records of the evolving composition of the exterior melt, including degassing pathways and ascent timescales, when paired with appropriate diffusion coefficients. Lithium concentration profiles were measured in quartz-hosted melt embayments from the rapidly quenched eruptive phases of five rhyolitic, caldera-forming eruptions to investigate the behavior of Li during magma decompression and ascent, where vapor partitioning and ascent dynamics were previously established by investigating H 2 O and CO 2 profiles. We find that in four systems, embayments contain lower interior Li concentrations than the coerupted melt inclusions; the fifth system contains the same Li concentrations in embayments and melt inclusions. However, many of these embayments contain gradients, with 84 % preserving Li enrichment near the melt-bubble interface, as compared to their interior concentration. We interpret these characteristics to represent two distinct stages of Li partitioning during magma decompression and ascent, in contrast to existing literature that proposes only one type of partitioning behavior. The first stage is interpreted as melt depletion of Li, likely driven by partitioning into an exsolved supercritical fluid phase, supported by the strong correlation between the extent of Li depletion and Cl concentration in the melt, as well as the decompression rate. This behavior then fundamentally shifts, where Li reenriches in the melt, postulated to be driven by the unmixing of the supercritical fluid phase at shallow pressures. For the one system that did not develop Li gradients through decompression, we attribute this to the lower values of Na and Cl in the melt, potentially inhibiting the partitioning of Li into a fluid phase. Importantly, the behavior of Li during decompression is not consistent within or between volcanic centers, highlighting the need for systematic experimental investigation in variable composition melts at pressures relevant to conduit dynamics. This knowledge would improve our ability to model Li profiles to understand magma decompression, and predict where Li resides (e.g., stored in volcanic glass, gas, or crystals) upon eruption prior to any later extraction.

Economic Geology↗
USGS2024

The SCEC/USGS community stress drop validation study using the 2019 Ridgecrest earthquake sequence

We introduce a community stress drop validation study using the 2019 Ridgecrest, California, earthquake sequence, in which researchers are invited to use a common dataset to independently estimate comparable measurements using a variety of methods. Stress drop is the change in average shear stress on a fault during earthquake rupture, and as such is a key parameter in many ground motion, rupture simulation, and source physics problems in earthquake science. Spectral stress drop is commonly estimated by fitting the shape of the radiated energy spectrum, yet estimates for an individual earthquake made by different studies can vary hugely. In this community study, sponsored jointly by the U. S. Geological Survey and Southern/Statewide California Earthquake Center, we seek to understand the sources of variability and uncertainty in earthquake stress drop through quantitative comparison of submitted stress drops. The publicly available dataset consists of nearly 13,000 earthquakes of M1 to 7 from two weeks of the 2019 Ridgecrest sequence recorded on stations within 1-degree. As a community study, findings are shared through workshops and meetings and all are invited to join at any time, at any interest level.

Seismica↗
USGS2024

Characterization of groundwater resources near the southeastern part of Puget Sound, Washington

More than 1 million people live within the active model area (AMA) in the southeastern part of the lowlands surrounding Puget Sound, or Puget Lowland, Washington, and groundwater is the source for approximately one-half of their public, domestic, and irrigation water demands. The 887-square-mile AMA, located in King and Pierce Counties, represents the area of analysis for the conceptual hydrogeologic framework and numerical groundwater-flow models within the study area and includes the Puyallup River and Chambers-Clover Creek watersheds. To assess the potential hydrologic and anthropogenic impacts to groundwater and the connected surface-water resources, conceptual and numerical groundwater-flow models of groundwater flow were developed by the U.S. Geological Survey Washington Water Science Center in close cooperation with 18 water-resource agencies and stakeholders. This multichapter volume documents the development of the conceptual and numerical groundwater-flow models of groundwater flow. Chapters A, B, and C provide an overall introduction to the multichapter volume (Chapter A), the conceptual hydrogeologic framework (Chapter B), and the groundwater budget (Chapter C). Chapters D and E describe numerical groundwater-flow model construction and calibration (Chapter D) and the numerical groundwater-flow model results (Chapter E). Collectively, these reports present a characterization and simulation tool for groundwater resources near the southeastern part of Puget Sound, Washington.

Scientific Investigations Report↗
USGS2026

Colored shaded-relief bathymetric and acoustic-backscatter maps of Jenkinson Lake with orthomosaic of the Sly Park Creek and Hazel Creek area, California

The Caldor Fire was ignited on August 14, 2021, and burned almost 222,000 acres (898 square kilometers) in forested terrain of the central and western Sierra Nevada, California. During the subsequent two months, the fire burned nearly all of Sly Park Creek watershed in El Dorado County. The El Dorado Irrigation District manages the water supply for the area using storage in Jenkinson Lake, a 1.6-kilometer- (1.0-mile-) wide and 3.6-kilometer- (2.2-mile-) long reservoir, located south of the town of Pollock Pines. Several weeks after the fire, the U.S. Geological Survey began investigations into post-fire landscape responses, including sediment yield, by measuring new sediment deposition in Jenkinson Lake. This study focused on the collection and processing of bathymetric and acoustic-backscatter data, as well as onshore aerial imagery in and around Jenkinson Lake, to support wildfire science after the Caldor Fire. A colored shaded-relief bathymetric map (sheet 1) and an acoustic backscatter map (sheet 2) show the lake floor morphology and backscatter intensities.

California↗
USGS2024

The 17 January 1994 Northridge, California, earthquake: A retrospective analysis

The 17 January 1994 Northridge, California, earthquake was a watershed event, with far-reaching societal and scientific impacts. The earthquake, which occurred in the early days of both broadband seismic networks and the Internet, spurred advances in seismic monitoring, real-time systems, and development of data products. Motivated by the 30th anniversary of the earthquake, we present a brief retrospective of the earthquake and its impact, and reconsider both ground motions and the aftershock distribution using modern tools and best-available data. With improvements in instrumentation and analysis methodology, recent earthquakes continue to reveal increasing complexity of ground motions, fault systems, and earthquake ruptures. Even in the absence of data from state-of-the art instrumentation, a retrospective consideration of ground motion data from the Northridge earthquake reveals complexities beyond what could be characterized (and modeled) thirty years ago. Aftershock relocations for both the 1971 Sylmar and 1994 Northridge earthquakes also reveal an updated view of fault complexity. Our study does provide a cautionary tale regarding legacy data sets and research results that are not easily accessible, which can result in discrepancies between catalog data and products from best-available science. We also briefly describe outreach products produced as part of the anniversary commemoration.

California↗
USGS2026

Geologic map of the Sierra Nevada, California and western Nevada

THE GEOLOGIC MAP OF THE SIERRA NEVADA is a core component of the Sierra Nevada Earth Science Atlas, which also includes geophysical, neotectonic, economic, and geochronologic data. The map illustrates the distribution of geologic units across the Sierra Nevada and related adjacent areas. Geologic units are grouped by type and age into three categories: Principally Paleozoic and Mesozoic metasedimentary and metavolcanic wall rocks, most of which are grouped into terranes; Paleozoic and Mesozoic plutons and intrusive suites, which intrude the wall rocks and form the core batholith of the range; and Late Cretaceous and Cenozoic sedimentary and volcanic rocks and surficial deposits that unconformably overlap the older units. Related rock units were combined and simplified for presentation at a scale of 1:400,000, as shown in the list of map units and associated correlation of map units (Plate 1B) and description of map units (Appendix A). Tectonic faulting, folding and uplift have overprinted the rocks and have strongly influenced the spatial distribution of units and the distinct morphology of the Sierra Nevada as we see it today. The Atlas is the result of collaborative work by scientists and mapmakers from the California Geological Survey and the U.S. Geological Survey. The Atlas was originally envisioned by the late geologist Warren Nokleberg (1939-2021), who contributed much to the initial geologic map compilation

California, Nevada↗
USGS2024

Development of USGS NSHMs: Do small changes in hazard imply small changes in risk?

One of the flagship products from the U.S. Geological Survey (USGS) is the National Seismic Hazard Model (NSHM). Since 1976, the NSHM has been periodically updated to reflect newly published earthquake science and provide probabilistic estimates of seismic hazard for the United States. During each update cycle, alternative models are deliberated, analyzed, and documented through logic trees and their corresponding logic tree branch weights. For example, the decision to modify a logic tree branch weight may be influenced by sensitivity analyses of the logic tree branches in their effects on the mean hazard. However, do small changes in traditional measures of hazard imply small changes in risk? In this study, we make use of two update cycles of the USGS NSHMs and a National Bridge Inventory (NBI) from the Federal Highway Administration (FHWA) to explore the preceding question. Specifically, we first identify geographic locations in the conterminous United States in which the change in hazard from one cycle to another is relatively small. Next, we model the seismic risk to highway bridges for these locations and for each update cycle, while simultaneously distinguishing low hazard environments from high hazard environments. These data enable quantitative analysis of how much changes in risk can be expected given small changes in hazard, investigating the importance of risk models in decision-making during development of the USGS NSHMs.

Conference Paper↗
USGS2024

Formation of vertical columnar seismic structures and seafloor depressions by groundwater discharge in the drowned Miami Terrace platform and overlying deep-water carbonates, southeastern Florida

The presence of vertical cross-formational fluid migration passageways within sedimentary basins can profoundly impact aquifer and reservoir fluid-flow and their identification is fundamental to informing management of subsurface fluid resources (groundwater, oil, gas). In an onshore and offshore southeastern part of Florida, 2D/3D seismic-reflection and bathymetry data document ∼153 vertical columnar structures composed of reflection disruptions up to 790 m in the height and averaging 360 m in diameter, and ∼219 subcircular to circular seafloor depressions up to 1334 m wide. Our study focuses on these features found within the offshore shallow-marine carbonate Miami Terrace platform, which drowned approximately at the end of the middle Miocene, and within overlying Plio-Quaternary deep-water carbonate slope and drift deposits. Most columnar structures are rooted in stratiform aquifers of the Miami Terrace platform and associated with faults or fault intersections produced by Eocene and circa late Miocene tectonics. The columns commonly terminate within the platform or as subcircular depressions along an amalgamated karstic and drowning unconformity at the platform top. The columns typically stretch upwards from a zone of deep karst cavity collapse through the Miami Terrace platform with upward decreasing sag on internal reflections. Following drowning and Plio-Quaternary partial burial of the Miami Terrace platform by deep-water deposits, the subcircular depressions and faults along the platform top were points of origin for a second phase of column growth upward into the deep-water deposits. The continuation of deep platform cavity collapse and column evolution produced pockmarks along paleo-seafloors within the deep-water deposits and at the present-day sea floor. The Plio-Quaternary pockmarks formed at water depths too deep to suggest an origin related to meteoric karst above or near sea level, but rather their formation is suggested to be related to cyclic sea level falls that drove increased groundwater head and density gradients, and seafloor discharge of offshore freshened groundwater sourced from the underlying platform. Plausibly, mixing of freshened groundwater and seawater at the seafloor discharge sites drove dissolution of the host deep-water deposits, which together with erosion by groundwater venting and current scouring formed the pockmarks. Seaward of the Plio-Quaternary seafloor pockmarks, at the late-middle Miocene upper slope of the Miami Terrace platform and along the regional karst/drowning unconformity is a slope-parallel band of ∼189 densely distributed subcircular seafloor depressions with diameters up to 1334 m at water depths up to ∼660 m. It is plausible that along the upper slope, faults and fractures produced by gravity-driven slope instability and possibly tectonics formed a dense network of fluid passageways that promoted upward artesian freshened groundwater flow to sites of discharge where mixing with seawater generated limestone dissolution and the depressions. But tectonic uplift may have forced emersion and initial meteoric sinkhole formation circa late Miocene with later enhancement by freshened groundwater discharge and bottom current erosion.

Florida↗
USGS2025

Over, under, and through: Hydrologic connectivity and the future of coastal landscape salinization

Seawater intrusion (SWI) affects coastal landscapes worldwide. Here we describe the hydrologic pathways through which SWI occurs - over land via storm surge or tidal flooding, under land via groundwater transport, and through watersheds via natural and artificial surface water channels—and how human modifications to those pathways alter patterns of SWI. We present an approach to advance understanding of spatiotemporal patterns of salinization that integrates these hydrologic pathways, their interactions, and how humans modify them. We use examples across the East Coast of the United States that exemplify mechanisms of salinization that have been reported around the planet to illustrate how hydrologic connectivity and human modifications alter patterns of SWI. Finally, we suggest a path for advancing SWI science that includes (a) deploying standardized and well-distributed sensor networks at local to global scales that intentionally track SWI fronts, (b) employing remote sensing and geospatial imaging techniques targeted at integrating above and belowground patterns of SWI, and (c) continuing to develop data analysis and model-data fusion techniques to measure the extent, understand the effects, and predict the future of coastal salinization.

Water Resources Research↗
USGS2026

Long-term monotonic trends in water budget components in the contiguous United States: Insights from two hydrologic models

Characterizing changes to water availability for domestic, industrial, agricultural, and other uses is essential to support water management. To better quantify these changes, the U.S. Geological Survey and National Science Foundation National Center for Atmospheric Research produced two hydrologic models simulating water budget components from 1980 to 2021 over the contiguous United States (CONUS). Both hydrologic models were driven by a common atmospheric forcing dataset and aggregated to common spatial and temporal scales, which enables a novel evaluation of congruency between the models. We present annual and seasonal trends in six water budget components (precipitation, evapotranspiration, streamflow, groundwater recharge, soil saturation, and snow water equivalent) based on the Mann–Kendall test for monotonic trend and Theil-Sen slope estimate for the water year 1983–2021 period for ~86,000 catchments in CONUS. Additional components and metrics from our analysis pipeline are available in an associated published dataset, which contains more than 46 million trend results. The water budget trends showed broad agreement with prior observational and modeling studies that indicate increasing trends in the northeast and decreasing trends in southwestern CONUS. We found the seasonal variability in water budget trends was greatest in the southern, central, and northwest CONUS. These findings support integrated trend assessments when coupled with trends in water quality and use.

Contiguous United States↗
USGS2026

Assessment of groundwater quantity and quality contributions to Lake Huron

Lake Huron, one of the five Great Lakes, borders the United States and Canada, with Michigan as the only U.S. State on its shoreline. Like other freshwater lakes, it faces water-quality challenges from nutrients and chemicals applied across its drainage basin. Although past studies focused on surface-water sources, groundwater contributions remain less understood. To address this gap, the U.S. Geological Survey, as part of the Cooperative Science and Monitoring Initiative, classified drainage basins to Lake Huron into eight hydrogeologic zones based on bedrock rock type and glacial sediment transmissivity. Utilizing existing data and empirical field data, we quantified groundwater discharge and identified areas of concern for loading of chloride and nitrate to Lake Huron. Groundwater contributions, including indirect and shoreline discharge, ranged from 5.8 to 11.5 inches annually, totaling 1.9 cubic miles and 0.09 cubic mile, respectively. Hydrogeologic zones with higher glacial sediment transmissivity yielded greater indirect groundwater discharge. Chloride levels above the U.S. Environmental Protection Agency’s 250-mg/L recommendation were mainly in the Saginaw lowlands, whereas nitrate above the 10-mg/L standard was rare—found in only 11 wells. Together, the analysis of where groundwater discharge is occurring in the Lake Huron Basin and the identification of areas with potential groundwater-quality concerns can help prioritize areas that are critical to protecting the long-term health of Lake Huron.

Michigan↗