SEARCH · Geology Reports

Results for “Basins and Coasts”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources

USGS1979

Anomalously high uplift rates along the Ventura-Santa Barbara coast, California-tectonic implications

The NW—SE trending segments of the California coastline from Point Arena to Point Conception (500 km) and from Los Angeles to San Diego (200 km) generally parallel major right-lateral strike-slip fault systems. Minor vertical crustal movements associated with the dominant horizontal displacements along these fault systems are recorded in local sedimentary basins and slightly deformed marine terraces. Typical maximum uplift rates during Late Quaternary time are about 0.3 m/ka, based on U-series ages of corals and amino-acid age estimates of fossil mollusks from the lowest emergent terraces. In contrast, the E–W-trending segments of the California coastline between Point Conception and Los Angeles (200 km) parallel predominantly northward-dipping thrust and high-angle reverse faults of the western Transverse Ranges. Along this coast, marine terraces display significantly greater vertical deformation. Amino-acid age estimates of mollusks from elevated marine terraces along the Ventura—Santa Barbara coast imply anomalously high uplift rates of between 1 and 6 m/ka over the past 40 to 100 ka. The deduced rate of terrace uplift decreases from Ventura to Los Angeles, conforming with a similar trend observed by others in contemporary geodetic data. The more rapid rates of terrace uplift in the western Transverse Ranges reflect N—S crustal shortening that is probably a local accommodation of the dominant right-lateral shear strain along coastal California.

California↗

USGS1982

Water resources inventory of Connecticut Part 10: Lower Connecticut River basin

The lower Connecticut River basin study area in south-central Connecticut includes 639 square miles and is drained principally by the Connecticut River and by seven smaller streams that flow directly to Long Island Sound between the West River on the west and the Connecticut River on the east. The population in 1979 was estimated to be 210,380. Much of the industrial development and population centers are in the Mattabesset River basin in the northwestern part, and the largest water use is also in the Mattabesset River basin. Precipitation averages 47 inches per year and provides an abundant supply of water. About 20 inches returns to the atmosphere as evapotranspiration, and the remainder either flows directly to streams or percolates to the water table, eventually discharging to Long Island Sound. Small quantities of water are exported from the basin by the New Haven and Meridan Water Departments, and small quantities are imported by the New Britain Water Department and Metropolitan Direct Commission. Precipitation during 1931-60 resulted in an average annual runoff of 302 billion gallons. In inflow from the Connecticut River is added to the average annual runoff, the 4,370 billion gallon s per year is potentially available for water ue. The domestic, institutional, commercial, and industrial (other than cooling water) water use for 1970 was 7 billion gallons, which is only 3 percent of the total water used, whereas 97 percent of the total is cooling water for power plants. Approximately 60 percent of the 7 billion gallons is treated before being discharged back to the streams. The total amount of fresh water used during 1970 was estimated to be 256,000 million gallons (Mgal), of which 247,000 Mgal was used for cooling water at stream electric-generating plants. The quantity for domestic, commercial, industrial, and agricultural used was 9,000 Mgal, which was approximately 120 gallons a day per person. Public water systems providing 70 percent of these requirement and all the systems supplying water met the drinking water standards of the Connecticut General Assembly (1975). Till is widespread and generally provides only small amounts of water. Wells in till normally yield only a few hundred gallons of water daily and may be inadequate during dry periods. The thickness of of till ranges from 0 to 15 feet; a median thickness of 26 feet is estimated from information provided in drillers' logs of 467 wells penetrating underlying bedrock. The till is generally used only as an emergency or secondary source of water. Bedrock aquifers underlie the entire area and include sedimentary and crystalline (igneous and metamorphic) rock types. These aquifers supply small and usually reliable quantities of water to wells and are the chief source of water for many rural homes and farms., About 90 percent of the wells tapping bedrock yield at least 2 gal/min. The median yields from wells tapping aquifers in sedimentary, igneous, and metamorphic rocks are 11, 8, and 6.5 gal/min, respectively. The quantity of water potentially available from stratified drift was estimated on the basis of hydraulic characteristics of the aquifers, mathematical modeling of the aquifer system, and evaluation of natural and induced recharge. Long-term yields estimated or ten areas underlain by significant thickness of stratified drift range from 0.4 to 4.4 million gallons per day (Mgal/d). A change in well spacing or numbering could increase the long-term yields, but detailed modeling verification studies are needed to confirm optimal well locations. The chemical and physical (turbidity, color, taste, and sediment load) quality of water is good. The water if generally low in dissolved solids and is classified as soft to hard. Surface water is less mineralized than ground water, especially during high flow, when it is primarily derived from surface runoff rather than groundwater runoff. A median dissolved-solids concentration of 42 milligrams per liter (mg/L) and median hardness of 18 mg/L were determined from water samples collected from 26 streams during the high-flow period. During the low-flow period, median dissolved-solids concentration of 61 mg/L and median hardness of 27 mg/L were determined from sample from the same streams. The quality of water in stratified-drift and crystalline-rock aquifers is generally better than that in the sedimentary-rock aquifers. Water from 32 wells tapping stratified drift had median dissolved-solids concentrations of 116 mg/L; and 33 wells tapping stratified drift and 42 tapping crystalline rock had median hardness of 73 mg/L and 68 mg/L, respectively. Water from 32 wells tapping sedimentary rock had median dissolved concentrations of 231 and 156 mg/L, respectively. Sedimentary rock generally yields the hardest water. Iron and manganese occur objectionable concentrations in places, particularly in water from streams draining swamps and in water from aquifers either rich in iron and manganese-nearing minerals or where the reducing environment for solution of these minerals is favorable. Concentrations of iron in excess of 0.3 mg/L were found in 35 percent of the high streamflow samples, and in 45 percent of the ground-water samples. Most of the high iron and manganese concentration in streams and aquifers are found east of the Connecticut River. Human activities and tidal influence along the coast have modified the quality of water in much f the study area. The greatest influence from human activities has been in the northwestern part, in the Mattabesset River basin. There, the quality of water has been affected by domestic and animal wastes, which cause high dissolved-solids concentrations, high nitrate and phosphate loads and high bacterial counts. In the entire area, high nitrate in groundwater occur only locally, and its presence in an individual water supply is chiefly a function of its proximity to sources of contamination, of well construction, and of thickness of overburden. Thirty public-supply wells did have water that had high sodium concentrations or objectionable iron and manganese concentrations, but these are not considered health hazards in the concentrations found in the water samples. Streams, wetlands, and some aquifers along the sough boundary of the basin contain salty water because of tidal movement or extensive ground-water withdrawals. High sediment concentrations also occur as a result of tidal influence in this area.

Connecticut↗

USGS2002

The Sacatosa coalbed methane field: A first For Texas

In 2001, The Exploration Company (TXCO), San Antonio, announced the Sacatosa Coalbed Methane (CBM) Field in Maverick County. This field is the first CBM field in Texas (Fig. 1). The field is producing from bituminous coal in the Cretaceous Olmos Formation that outcrops to the west and dips easterly towards the Gulf Coast. The CBM field was developed in coalbeds whose general structure was known from log top data in pre-existing oil and gas wells drilled throughout the basin (Fig. 2). These preliminary data showed a large area of coal above 2000 ft depth with net coal thicknesses in the 5 to 30 ft range. Subsequently, TXCO and the USGS formed a cooperative research effort to determine the gas in place, rank, quality, extent and thickness of the Olmos coal in order to understand the resource potential of this newly emerging field.

Texas↗

USGS1999

Occurrence and transport of total mercury and methyl mercury in the Sacramento River Basin, California

Mercury poses a water-quality problem for California's Sacramento River, a large river with a mean annual discharge of over 650 m3/s. This river discharges into the San Francisco Bay, and numerous fish species of the bay and river contain mercury levels high enough to affect human health if consumed. Two possible sources of mercury are the mercury mines in the Coast Ranges and the gold mines in the Sierra Nevada. Mercury was once mined in the Coast Ranges, west of the Sacramento River, and used to process gold in the Sierra Nevada, east of the river. The mineralogy of the Coast Ranges mercury deposits is mainly cinnabar (HgS), but elemental mercury was used to process gold in the Sierra Nevada. Residual mercury from mineral processing in the Sierra Nevada is mainly in elemental form or in association with oxide particles or organic matter and is biologically available. Recent bed-sediment sampling, at sites below large reservoirs, showed elevated levels of total mercury (median concentration 0.28 ??g/g) in every large river (the Feather, Yuba, Bear, and American rivers) draining the Sierra Nevada gold region. Monthly sampling for mercury in unfiltered water shows relatively low concentrations during the nonrainy season in samples collected throughout the Sacramento River Basin, but significantly higher concentrations following storm-water runoff. Measured concentrations, following storm-water runoff, frequently exceeded the state of California standards for the protection of aquatic life. Results from the first year of a 2-year program of sampling for methyl mercury in unfiltered water showed similar median concentrations (0.1 ng/l) at all sampling locations, but with apparent high seasonal concentrations measured during autumn and winter. Methyl mercury concentrations were not significantly higher in rice field runoff water, even though rice production involves the creation of seasonal wetlands: higher rates of methylation are known to occur in stagnant wetland environments that have high dissolved carbon.Mercury poses a water-quality problem for California's Sacramento River, a large river with a mean annual discharge of over 650 m3/s. This river discharges into the San Francisco Bay, and numerous fish species of the bay and river contain mercury levels high enough to affect human health if consumed. Two possible sources of mercury are the mercury mines in the Coast Ranges and the gold mines in the Sierra Nevada. Mercury was once mined in the Coast Ranges, west of the Sacramento River, and used to process gold in the Sierra Nevada east of the river. The mineralogy of the Coast Ranges mercury deposits is mainly cinnabar (HgS), but elemental mercury was used to process gold in the Sierra Nevada. Residual mercury from mineral processing in the Sierra Nevada is mainly in elemental form or in association with oxide particles or organic matter and is biologically available. Recent bed-sediment sampling, at sites below large reservoirs, showed elevated levels of total mercury (median concentration 0.28 ??g/g) in every large river (the Feather, Yuba, Bear, and American rivers) draining the Sierra Nevada gold region. Monthly sampling for mercury in unfiltered water shows relatively low concentrations during the nonrainy season in samples collected throughout the Sacramento River Basin, but significantly higher concentrations following storm-water runoff. Measured concentrations, following storm-water runoff, frequently exceeded the state of California standards for the protection of aquatic life. Results from the first year of a 2-year program of sampling for methyl mercury in unfiltered water showed similar median concentrations (0.1 ng/l) at all sampling locations, but with apparent high seasonal concentrations measured during autumn and winter. Methyl mercury concentrations were not significantly higher in rice field runoff water, even though rice production involves the creation of seasonal wetlands: higher rates of methylation a

Journal of Geochemical Exploration↗

USGS1996

Geographic variation in migratory behavior of greater white-fronted geese ( Anser albifrons )

We studied the migration and winter distribution of adult Greater White-fronted Geese ( Anser albifrons frontalis ) radio-marked on the Yukon-Kuskokwim Delta (YKD) and Bristol Bay Lowlands (BBL) of Alaska from 1987 to 1992. The major autumn staging site for geese from both breeding areas was the Klamath Basin on the California/Oregon border. However, temporal use of this area differed markedly between populations. Geese from the BBL arrived at the Klamath Basin nearly 30 days before geese from the YKD and departed before most YKD geese had arrived. Ninety percent of BBL geese used the Klamath Basin in autumn, whereas 30% of YKD geese bypassed the Klamath Basin during autumn and instead flew directly to the Central Valley of California. Nearly all BBL geese migrated directly from the Klamath Basin to wintering areas in Mexico, bypassing the Central Valley. Ninety percent of the BBL geese wintered in Mexico, as opposed to <20% of the YKD geese. Wetlands of the Interior Highlands in the state of Chihuahua, particularly Laguna Babicora, were used by >90% of the radio-marked geese in Mexico. Marshes along the West Coast comprised the other important wintering habitat in Mexico. The Sacramento Valley of California was the predominant wintering area for YKD geese. BBL geese migrated north from Mexico into the San Joaquin Valley or Sacramento-San Joaquin Delta of California by the last week of January. Fifty-five percent of the BBL population used the Klamath Basin in spring, but many birds staged in eastern Oregon and western Idaho. In contrast, geese from the YKD staged almost exclusively in the Klamath Basin during spring before flying to staging areas in Alaska. Breeding allopatry and temporal partitioning on staging and wintering areas likely has contributed to the evolution of previously described phenotypic differences between these populations. These two populations, along with the Tule Greater White-fronted Goose (A. a. gambeli), may constitute a portion of a Rassenkreis, a group of subspecies connected by clines, each ecotype of which has independent conservation needs.

The Auk↗

USGS2019

India National Gas Hydrate Program Expedition 02 Summary of Scientific Results: Gas hydrate systems along the eastern continental margin of India

The primary objectives of the India National Gas Hydrate Program Expedition 02 (NGHP-02) were to obtain new data on the occurrence of gas hydrate systems and to advance the understanding of the controls on the formation of gas hydrate accumulations in the offshore of India. In accordance with the ultimate overall goal of the NGHP effort to assess the energy resource potential of marine gas hydrates in India, particular focus was placed on the exploration and evaluation of gas hydrate occurrences at high saturations in sand-rich systems. NGHP-02 operations were conducted from 3-March-2015 to 28-July-2015 off the eastern coast of India and included logging while drilling (LWD) operations at 25 locations, and coring and wireline logging operations at 10 locations, in the Krishna-Godavari and Mahanadi Basins. The formation of highly concentrated gas hydrate accumulations, which are more suitable for energy extraction, requires the presence of relatively coarse-grained sediments with porosity needed to support the migration and accumulation of gas, and the nucleation of gas hydrate. The results of downhole logging, coring and formation pressure testing operations during NGHP-02 have confirmed the presence of extensive sand-rich depositional systems throughout the deepwater portions of the Krishna-Godavari and Mahanadi Basins. Two areas of Krishna-Godavari Basin, referred to as Areas B and C, contain substantial gas hydrate accumulations in sand-rich systems and therefore represent ideal candidate sites for future gas hydrate production testing. This summary and technical report includes a comprehensive synthesis of the geologic, geophysical, geochemical, and physical property data acquired during NGHP-02 as it relates to the controls on gas hydrate occurrence, particularly with regards to sand-hosted accumulations. In the Mahanadi Basin, despite the confirmation of extensive reservoir capacity, gas supply at the NGHP-02 sites was insufficient to charge the reservoirs with gas hydrates. In the Krishna-Godavari Basin, extensive reservoir systems were confirmed with sediment grain-sizes ranging from coarse-silts to gravels. These reservoirs range from fully- to partially filled with gas hydrate. The gas is determined to be from only microbial sources, and in part migrated into the reservoirs from deeper systems. The controls on gas hydrate occurrence are complex and varied; and include substantial reservoir heterogeneity and sufficient permeability throughout the reservoirs and seals that allowed pervasive fluid flow into and through the hydrate-bearing systems. These discoveries are the most significant confirmation of the exploration approach that focuses on direct detection of hydrate reservoirs supported by comprehensive petroleum systems analyses.

Journal of Marine and Petroleum Geology↗

USGS2024

NEWTS1.0: Numerical model of coastal Erosion by Waves and Transgressive Scarps

Models of rocky-coast erosion help us understand the physical phenomena that control coastal morphology and evolution, infer the processes shaping coasts in remote environments, and evaluate risk from natural hazards and future climate change. Existing models, however, are highly complex, are computationally expensive, and depend on many input parameters; this limits our ability to explore planform erosion of rocky coasts over long timescales (thousands to millions of years) and over a range of conditions. In this paper, we present a simplified cellular model of coastline evolution in closed basins through uniform erosion and wave-driven erosion. Uniform erosion is modeled as a constant rate of retreat. Wave erosion is modeled as a function of fetch, the distance over which the wind blows to generate waves, and the angle between the incident wave and the shoreline. This reduced-complexity model can be used to evaluate how a detachment-limited coastal landscape reflects climate, sea-level history, material properties, and the relative influence of different erosional processes.

Geoscientific Model Development↗

USGS1974

Major chemical characteristics of Mesozoic Coast Range ophiolite in California

Sixty-four major element analyses of rocks representative of the Coast Range ophiolite in California were compared with analyses of other onland ophiolite sequences and those of rocks from oceanic ridges. The rocks can be classed in five groups harzburgite-dunite, clinopyroxenite-wehrlite, gabbro, basalt-spilite, and keratophyre-quartz keratophyre which on various diagrams occupy nonoverlapping fields. The harzburgite-dunite from onland ophiolite and ocean ridges are comparable and very low in alkalies. Possible differentiation trends defined on AFM diagrams by other rocks from onland ophiolites and ocean ridges suggest two lines of descent: (1) A trend much like the calc-alkalic trend, though shifted somewhat toward higher iron, and (2) an iron-enrichment trend defined chiefly by the more iron-rich gabbros and amphibolite. MgO-variation diagrams for rocks from the Coast Range ophiolite further distinguish the iron-rich gabbros and amphibolite from the other rock groups and indicate that the iron enrichment, unlike that of the Skaergaard trend, is related to the formation of amphibole. Ophiolite sequences that include the most silicic rock types, such as quartz keratophyre, also exhibit the most pronounced dual lines of descent, suggesting that the silicic rocks and the amphibole-rich gabbros are somehow related. Although the major element chemistry of the Coast Range ophiolite is clearly like that of rocks dredged from oceanic ridges, it is not sufficiently diagnostic to discriminate among the choices of a spreading ridge, an interarc basin, or perhaps even the root zone of an island arc as the site of ophiolite formation.

California↗

USGS2020

Morphology, structure, and kinematics of the San Clemente and Catalina faults based on high-resolution marine geophysical data, southern California Inner Continental Borderland

Catalina Basin, located within the southern California Inner Continental Borderland (ICB), is traversed by two active submerged fault systems that are part of the broader North America-Pacific plate boundary: the San Clemente fault (along with a prominent splay, the Kimki fault) and the Catalina fault. Previous studies have suggested that the San Clemente fault (SCF) may be accommodating up to half of the approximately 8 mm/yr right-lateral slip distributed across the ICB between San Clemente Island and the mainland coast, and that the Catalina fault (CF) acts as a significant restraining bend in the larger transform system. Here, we provide new high-resolution geophysical constraints on the seabed morphology, deformation history, and kinematics of the active faults in and on the margins of Catalina Basin. We significantly revise SCF mapping and describe a discrete releasing bend that corresponds with lows in gravity and magnetic anomalies, as well as a connection between the SCF and the Santa Cruz fault to the north. Subsurface seismic-reflection data show evidence for a vertical SCF with significant lateral offsets, while the CF exhibits lesser cumulative deformation with a vertical component indicated by folding adjacent to the CF. Geodetic data are consistent with SCF right-lateral slip rates as high as ~3.6 mm/yr and transpressional convergence of <1.5 mm/yr accommodated along the CF. The Quaternary strands of the SCF and CF consistently cut across Miocene and Pliocene structures, suggesting generation of basin and ridge morphology in a previous tectonic environment that has been overprinted by Quaternary transpression. Some inherited crustal fabrics, especially thinned crust and localized, relatively hard crustal blocks, appear to have had a strong influence on the geometry of the main trace of the SCF, whereas inherited faults and other structures (e.g., the Catalina Ridge) appear to have minimal influence on the geometry of active faults in the ICB.

California↗

USGS2021

California and Landsat

California has remarkable geographic diversity, from 1,100 miles of Pacific shoreline to 33 million acres of trees, including its famous redwood forests along the Pacific Coast Highway, U.S. Route 101. And although California’s nickname is “The Golden State," it may also deserve the title of “The Extreme State.” Mount Whitney, the highest peak in the conterminous United States, stands at 14,494 feet above sea level in the Sierra Nevada mountain range. Just 2.5 hours away by car, Death Valley’s Badwater Basin boasts the lowest point in the United States: 282 feet below sea level. Although hundreds of inches of snow fall on Mount Whitney each year, the rainfall in Death Valley, commonly called the hottest place on Earth, averages less than 2 inches. California is the most populous U.S. State with 39 million residents, 26 million of whom live near the coast. It’s also the most agriculturally productive State, raising a variety of fruits, vegetables, nuts, grains, grasses, and flowers in addition to dairy and livestock. Although climate change affects many of these people, production, and places, Landsat can help agencies and residents monitor their landscapes and plan for a resilient future.

California↗

USGS2000

Geologic map of the Wildcat Lake 7.5' quadrangle, Kitsap and Mason Counties, Washington

The Wildcat Lake quadrangle lies in the forearc of the Cascadia subduction zone, about 20-km east of the Cascadia accretionary complex exposed in the Olympic Mountains (Tabor and Cady, 1978),and about 100-km west of the axis of the Cascades volcanic arc. The quadrangle lies near the middle of the Puget Lowland, which typically has elevations less than 600 feet (183 m), but on Gold Mountain, in the center of the quadrangle, the elevation rises to 1761 feet (537 m). This anomalously high topography also provides a glimpse of the deeper crust beneath the Lowland. Exposed on Green and Gold Mountains are rocks related to the Coast Range basalt terrane. This terrane consists of Eocene submarine and subaerial tholeiitic basalt of the Crescent Formation, which probably accreted to the continental margin in Eocene time (Snavely and others, 1968). The Coast Range basalt terrane may have originated as an oceanic plateau or by oblique marginal rifting (Babcock and others, 1992), but its subsequent emplacement history is complex (Wells and others, 1984). In southern Oregon, onlapping strata constrain the suturing to have occurred by 50 Ma; but on southern Vancouver Island where the terrane-bounding Leech River fault is exposed, Brandon and Vance (1992) concluded suturing to North America occurred in the broad interval between 42 and 24 Ma. After emplacement of the Coast Range basalt terrane, the Cascadia accretionary complex,exposed in the Olympic Mountains west of the quadrangle,developed by frontal accretion and underplating (e.g., Clowes and others, 1987). The Seattle basin, part of which lies to the north of Green Mountain, also began to develop in late Eocene time due to forced flexural subsidence along the Seattle fault zone (Johnson and others, 1994). Domal uplift of the accretionary complex beneath the Olympic Mountains occurred after approximately 18 million years ago (Brandon and others, 1998). Ice-sheet glaciation during Quaternary time reshaped the topography of the quadrangle, and approximately two-thirds of the map area is covered with Quaternary deposits related to the last glaciation. Geophysical studies and regional mapping indicate the Seattle fault lies north of Green Mountain. This fault produced a large earthquake about 1000 years ago and may pose a significant earthquake hazard (Bucknam and others, 1992; Atwater and Moore, 1992; Karlin and Abella,1992; Schuster and others, 1992; Jacoby and others, 1992). We found no evidence of Holocene faulting in the Wildcat Lake quadrangle. Geologic mapping within and marginal to the quadrangle began with Willis (1898), who described glacial deposits in Puget Sound. Weaver (1937) correlated volcanic rocks in the quadrangle to the Eocene Metchosin Volcanics on Vancouver Island. Sceva (1957), Garling and Moleenar (1965), and Deeter (1978) all focused on mapping and understanding the Quaternary stratigraphy of the Kitsap Peninsula, but they also examined bedrock in the quadrangle. Reeve (1979) was the first to examine the igneous rocks on Green and Gold Mountains in some detail, and Clark (1989) significantly improved Reeve's (1979) mapping. Clark's (1989) mapping was conducted soon after extensive logging on the mountains. A surficial geologic map of the Seattle 1:100,000-scale quadrangle, which includes the Wildcat Lake 1:24,000-scale quadrangle, was published by Yount and others (1993). Yount and Gower (1991) also published a bedrock geologic map of the Seattle quadrangle. Geologic mapping for this report was conducted by Haeussler in the spring and summer of 1998 and in the winter of 1999. We could not substantially improve upon the bedrock mapping of Clark (1989) and thus it is incorporated into this map. Well data in the southeastern corner of the map area also helped to constrain the surficial mapping (Geomatrix Consultants, 1997). In addition, 1995 vintage 1:12,000-scale aerial photographs were used in mapping Quaternary deposits. Geologic time scale is that of Berggeren and others (1995).

Washington↗

USGS2024

The 2023 U.S. 50-state National Seismic Hazard Model: Changes in 2023 compared to 2018 ground motions

We present the 2023 U.S. National Seismic Hazard Model (NSHM) for all 50 states that applies new smoothed seismicity, fault rupture, and ground motion models. New data and methods are introduced in the 2023 earthquake rupture forecast that include: new earthquake catalogs - excluding induced earthquakes, alternative declustering methods, spatially smoothed seismicity distributions, full-catalog scaled rates to account for aftershocks, updated CEUS-WUS attenuation boundary, new magnitude-scaling equations, new geodetic and geologic deformation models, and alternative fault system solutions accounting for a more complete representation of epistemic uncertainty potential for earthquake generation in Alaska, Hawaii, and the conterminous U.S. Improved ground motion models consider new Next Generation Attenuation NGASubduction, modified NGA-East, and adjustments to account for regional biases in ground shaking observations. Semi-empirical and 3D simulations of ground motion are applied to account for shaking at 21 oscillator periods, 2 peak motions, and 8 site conditions. Site effects models are constructed for western U.S. basins (Seattle, Portland/Tualatin, San Francisco, Central Valley of California, Los Angeles, and Salt Lake City) and for sites with deep sedimentary wedges found across the central and eastern U.S. Gulf Coast and Atlantic coastal plain regions. These models result in substantial changes compared to the older NSHMs and are differentiated for the earthquake rupture forecast and ground motion model changes to display sensitivities and impacts.

Conference Paper↗

USGS2019

Heavy mineral sands resources in China

About 200 known coastal deposits of heavy mineral sands (HMS) occur in China, in which considerable mineral resources of titanium, zircon, rare earth elements, and thorium exist in the forms of ilmenite, rutile, zircon, and monazite. More than 20 of these HMS deposits are reported as having been or are actively being mined in China during the past three decades, of which 12 have been reported to have industrial resources. Commercially important deposits occur almost entirely in Cenozoic beach and sand dune deposits, principally along China’s eastern coast (e.g., Shandong Province) and southern coast (e.g., Guangxi, Guangdong, Hainan, and Fujian provinces), and particularly on Hainan island. There are also important deposits of HMS along coastal areas of Taiwan. China has the largest share of the world’s economic ilmenite resources in HMS deposits (31%). A variety of igneous and associated metamorphic rocks along the coastal areas of China provided an abundant source of heavy minerals for the formation of the HMS occurrences. Studies of titanium-rich HMS deposits have shown that ilmenite is mostly sourced from igneous rocks. For example, 40% of the bedrock of Hainan island consists of Triassic and Cretaceous granites emplaced into rocks of the Cathyasia Block, and all of the HMS districts on the island lie no more than 15 km downstream from a Middle Triassic suite of syenite to granite intrusions. The southern coastal regions of Guangdong and Guangxi provinces are dominated by Jurassic granodiorite, biotite granite, two-mica granite, and A-type granite, with minor gabbro and syenite. Identified accessory minerals in the Jurassic alkaline granitoids include zircon, apatite, allanite, titanite, magnetite, ilmenite, monazite, and niobite. Thus, multiple plutons are in proximity to the Cenozoic coastal plain and are available as bedrock sources for the detrital titanium minerals, zircon, and monazite. More than 100 HMS deposits and prospects have been identified in Shandong Province, consisting of more than 20 varieties of heavy minerals in quartz sand, which include zircon, ilmenite, rutile, monazite, magnetite, xenotime, and gold (in general order of abundance) derived from Precambrian metamorphic basement and Mesozoic intrusions. Of these minerals, zircon, magnetite, gold, and quartz sand have economic significance. The quartz sands are used by the glass and construction industries. The placers mainly occur in and adjacent to the littoral zones of the northern and southern coasts of the Jiaodong Peninsula in Shandong province. Seven beach placer, HMS prospective areas have been delineated in coastal areas of the peninsula. Due to nearly exhausted placer reserves in the Chinese coastal zones, as well as increased environmental restrictions, future prospecting for heavy minerals will likely focus on ancient beach systems in China’s inland sedimentary basins. Also, offshore deposits of HMS in shallow coastal waters are other potential sources of heavy minerals, such as the Baoding Sea zircon-titanium, minerals-rich placer under development near Wanning on Hainan. Similarly, there is potential for offshore HMS deposits in shallow waters of the entire coastal area of southern Taiwan that remains to be fully evaluated. Reconnaissance sampling along Taiwan island’s coasts has revealed the potential for extensive, high-grade HMS accumulations nearshore.

Book chapter↗

USGS2009

The Columbia River Basalt Group: from the gorge to the sea

Miocene flood basalts of the Columbia River Basalt Group inundated eastern Washington, Oregon, and adjacent Idaho between 17 and 6 Ma. Some of the more voluminous flows followed the ancestral Columbia River across the Cascade arc, Puget-Willamette trough, and the Coast Range to the Pacific Ocean. We have used field mapping, chemistry, and paleomagnetic directions to trace individual flows and flow packages from the Columbia River Gorge westward into the Astoria Basin, where they form pillow palagonite complexes and mega-invasive bodies into older marine sedimentary rocks. Flows of the Grande Ronde, Wanapum, and Saddle Mountains Basalts all made it to the ocean; at least 33 flows are recognized in the western Columbia River Gorge, 50 in the Willamette Valley, 16 in the lower Columbia River Valley, and at least 12 on the Oregon side of the Astoria Basin. In the Astoria Basin, the basalt flows loaded and invaded the wet marine sediments, producing peperite breccias, soft sediment deformation, and complex invasive relations. Mega-invasive sills up to 500 m thick were emplaced into strata as old as Eocene, and invasive dikes up to 90 m thick can be traced continuously for 25 km near the basin margin. Mega-pillow complexes up to a kilometer thick are interpreted as the remains of lava deltas that prograded onto the shelf and a filled submarine canyon southeast of Astoria, possibly providing the hydraulic head for injection of invasive sills and dikes at depth.

Oregon;Washington↗

USGS2021

Crustal seismic attenuation of the central United States and Intermountain West

Seismic attenuation is generally greater in the western United States (WUS) than the central and eastern United States (CEUS), but the nature of this transition or location of this boundary is poorly constrained. We conduct crustal seismic (Lg) attenuation tomography across a region that stretches from the CEUS across the Rocky Mountains to the Basin and Range using a total of 115,870 amplitude measurements from 106 earthquakes recorded on 544 stations across five frequency bands spanning 0.5–16 Hz. Similar to previous studies, we find higher attenuation in the WUS ( Q 0 ∼ 190) than the nominally CEUS ( Q 0 ∼ 250) and comparatively high attenuation on the Gulf Coast ( Q 0 ∼ 175). Our models defy simple east versus west regionalization, however. Heterogeneity within the Rocky Mountain region—low attenuation in the Colorado Plateau interior and Wyoming Craton ( Q 0 ∼ 230) compared to high attenuation in the southern Rockies ( Q 0 ∼ 110)—exceeds the gross differences between the CEUS and western United States. These province-scale patterns are readily interpreted in terms of intrinsic attenuation. The boundary between the Colorado Plateau and Basin and Range hosts the highest attenuation imaged in the study area ( Q 0 ∼ 90), consistent with localized scattering across contrasting crustal structure. Focused high attenuation in the southern Rockies may represent the effects of represent in situ partial crustal melt. Within the CEUS, second-order bands of comparatively high attenuation align with the Proterozoic Yavapai-Mazatzal suture zone and Midcontinent Rift. This complex attenuation structure defies broad regionalization and suggests a need for path-specific models near these boundaries and for critical infrastructure.

Journal of Geophysical Research: Solid Earth↗

USGS1990

The Ebro margin study, northwestern Mediterranean Sea - an introduction

The Ebro continental margin from the coast to the deep sea off northeastern Spain was selected for a multidisciplinary project because of the abundant Ebro River sediment supply, Pliocene and Quaternary progradation, and margin development in a restricted basin where a variety of controlling factors could be evaluated. The nature of this young passive margin for the last 5 m.y. was investigated with particular emphasis on marine circulation, sediment dynamics, sediment geochemistry, depositional facies, seismic stratigraphy, geotechnical properties, geological hazards and human influences. These studies show the importance of marine circulation, variation in sediment supply, sea-level oscillation and tectonic setting for the understanding of modern and ancient margin depositional processes and growth patterns.

Marine Geology↗

USGS2009

Mitochondrial DNA evolution in the Anaxyrus boreas species group

The Anaxyrus boreas species group currently comprises four species in western North America including the broadly distributed A. boreas, and three localized species, Anaxyrus nelsoni, Anaxyrus exsul and Anaxyrus canorus. Phylogenetic analyses of the mtDNA 12S rDNA, cytochrome oxidase I, control region, and restriction sites data, identified three major haplotype clades. The Northwest clade (NW) includes both subspecies of A. boreas and divergent minor clades in the middle Rocky Mountains, coastal, and central regions of the west and Pacific Northwest. The Southwest (SW) clade includes A. exsul, A. nelsoni, and minor clades in southern California. Anaxyrus canorus, previously identified as paraphyletic, has populations in both the NW and SW major clades. The Eastern major clade (E) includes three divergent lineages from southern Utah, the southern Rocky Mountains, and north of the Great Basin at the border of Utah and Nevada. These results identify new genetic variation in the eastern portion of the toad's range and are consistent with previous regional studies from the west coast. Low levels of control region sequence divergence between major clades (2.2-4.7% uncorrected pair-wise distances) are consistent with Pleistocene divergence and suggest that the phylogeographic history of the group was heavily influenced by dynamic Pleistocene glacial and climatic changes, and especially pluvial changes, in western North America. Results reported here may impact conservation plans in that the current taxonomy does not reflect the diversity in the group. ?? 2008 Elsevier Inc.

Molecular Phylogenetics and Evolution↗

USGS2012

Population size of snowy plovers breeding in North America

Snowy Plovers ( Charadrius nivosus ) may be one of the rarest shorebirds in North America yet a comprehensive assessment of their abundance and distribution has not been completed. During 2007 and 2008, 557 discrete wetlands were surveyed and nine additional large wetland complexes sampled in México and the USA. From these surveys, a population of 23,555 (95% CI = 17,299 – 29,859) breeding Snowy Plovers was estimated. Combining the estimate with information from areas not surveyed, the total North American population was assessed at 25,869 (95% CI = 18,917 – 32,173). Approximately 42% of all breeding Snowy Plovers in North America resided at two sites (Great Salt Lake, Utah, and Salt Plains National Wildlife Refuge, Oklahoma), and 33% of all these were on wetlands in the Great Basin (including Great Salt Lake). Also, coastal habitats in central and southern Texas supported large numbers of breeding plovers. New breeding sites were discovered in interior deserts and highlands and along the Pacific coast of México; approximately 9% of the North American breeding population occurred in México. Because of uncertainties about effects of climate change and current stresses to breeding habitats, the species should be a management and conservation priority. Periodic monitoring should be undertaken at important sites to ensure high quality habitat is available to support the Snowy Plover population.

Waterbirds↗