Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Applied Energy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21Linked to original sources
USGS2003

Ductile flow of methane hydrate

Compressional creep tests (i.e., constant applied stress) conducted on pure, polycrystalline methane hydrate over the temperature range 260-287 K and confining pressures of 50-100 MPa show this material to be extraordinarily strong compared to other icy compounds. The contrast with hexagonal water ice, sometimes used as a proxy for gas hydrate properties, is impressive: over the thermal range where both are solid, methane hydrate is as much as 40 times stronger than ice at a given strain rate. The specific mechanical response of naturally occurring methane hydrate in sediments to environmental changes is expected to be dependent on the distribution of the hydrate phase within the formation - whether arranged structurally between and (or) cementing sediments grains versus passively in pore space within a sediment framework. If hydrate is in the former mode, the very high strength of methane hydrate implies a significantly greater strain-energy release upon decomposition and subsequent failure of hydrate-cemented formations than previously expected.

Canadian Journal of Physics↗
USGS2022

Scope of the cortisol stress response in Chinook salmon during maturation

In semelparous Pacific salmon, increased cortisol levels accompany sexual maturation and may be related to the rapid senescence and death that occur after spawning. In fish with extremely high cortisol, pre-spawning mortality is more likely. This may be because elevated cortisol is accompanied by energy depletion and reduces the immune capacity of sexually maturing individuals, thus increasing their susceptibility to parasites and pathogens. Several studies have measured cortisol levels in Pacific salmon during the last few weeks prior to spawning, but there is a lack of information regarding longer-term changes in resting and stressed cortisol levels of migrating adult Pacific salmon. A better understanding of the scope of the cortisol response during sexual maturation could contribute to understanding the extremely high pre-spawning mortality experienced by some threatened populations of Pacific salmon. The objective of this study was to determine the scope of the cortisol stress response in spring Chinook salmon as well as the dynamics of resting cortisol during maturation. We conducted a laboratory experiment in which plasma cortisol in adult Chinook salmon was measured before and after application of a standardized stressor applied at monthly intervals during the last three months prior to spawning. We found that resting and stressed cortisol levels increased during the last three months prior to spawning. We also found that sexually maturing Chinook salmon are able to mount a cortisol response to acute stressors when resting levels are elevated during maturation. Additionally, the effects of stress and time on cortisol dynamics differed between males and females as well as between individuals, which has implications for population resilience to anthropogenic stressors in wild populations.

Oregon↗
USGS2007

Role of sediment resuspension in the remobilization of particulate-phase metals from coastal sediments

The release of particulate-phase trace metals due to sediment resuspension has been investigated by combining erosion chamber experiments that apply a range of shear stresses typically encountered in coastal environments with a shear stress record simulated by a hydrodynamic model. Two sites with contrasting sediment chemistry were investigated. Sediment particles enriched in silver, copper, and lead, 4−50 times greater than the bulk surface-sediment content, were the first particles to be eroded. As the shear-stress level was increased in the chamber, the total mass eroded increased, but the enrichment of these trace metals fell, approaching the bulk-sediment content. From the temporal distribution of shear stress generated by the hydrodynamic model for a site in Boston Harbor, resuspension fluxes were estimated. The erosion threshold of this site is exceeded during spring tides, releasing the particles enriched in trace metals into the water column. Due to the higher trace metal content and the regularity of resuspension, low-energy resuspension events (up to a shear stress of 0.2 N/m 2 ) contribute up to 60% of the resuspension metal flux in an average year. The estimated annual quantity of copper and lead resuspended into the water column is higher than estimates of the total riverine flux for these metals. These results indicate that sediment resuspension is a very important mechanism for releasing metals into the water column and provide new insight into the chemical and physical processes controlling the long-term fate of trace metals in contaminated sediments.

Massachusetts↗
USGS2022

Global tellurium supply potential from electrolytic copper refining

The transition towards renewable energy requires increasing quantities of nonfuel mineral commodities, including tellurium used in certain photovoltaics. While demand for tellurium may increase markedly, the potential to increase tellurium supply is not well-understood. In this analysis, we estimate the quantity of tellurium contained in anode slimes generated by electrolytic copper refining by country between 1986 and 2018, including uncertainties. For 2018, the results indicate that 1930 (1500-2700, 95% confidence interval) metric tons of tellurium were contained in anode slimes globally. This is nearly quadruple the reported tellurium production for that year. China has the greatest potential to increase tellurium supplies. However, most of the tellurium potentially recoverable by Chinese refineries appears to come from copper mined elsewhere. Further research into the business decisions associated with tellurium recovery may help translate the physical availability of tellurium into economic availability. The methodology presented here can be applied to other byproduct elements.

Resources, Conservation & Recycling↗
USGS2015

A robust calibration technique for acoustic emission systems based on momentum transfer from a ball drop

We describe a technique to estimate the seismic moment of acoustic emissions and other extremely small seismic events. Unlike previous calibration techniques, it does not require modeling of the wave propagation, sensor response, or signal conditioning. Rather, this technique calibrates the recording system as a whole and uses a ball impact as a reference source or empirical Green’s function. To correctly apply this technique, we develop mathematical expressions that link the seismic moment $M_{0}$ of internal seismic sources (i.e., earthquakes and acoustic emissions) to the impulse, or change in momentum $\Delta p $, of externally applied seismic sources (i.e., meteor impacts or, in this case, ball impact). We find that, at low frequencies, moment and impulse are linked by a constant, which we call the force‐moment‐rate scale factor $C_{F\dot{M}} = M_{0}/\Delta p$. This constant is equal to twice the speed of sound in the material from which the seismic sources were generated. Next, we demonstrate the calibration technique on two different experimental rock mechanics facilities. The first example is a saw‐cut cylindrical granite sample that is loaded in a triaxial apparatus at 40 MPa confining pressure. The second example is a 2 m long fault cut in a granite sample and deformed in a large biaxial apparatus at lower stress levels. Using the empirical calibration technique, we are able to determine absolute source parameters including the seismic moment, corner frequency, stress drop, and radiated energy of these magnitude −2.5 to −7 seismic events.

Bulletin of the Seismological Society of America↗
USGS2025

RUSH: Rapid remote sensing Updates of land cover for Storm and Hurricane forecast models

Coastal vegetated ecosystems, including tidal marshes, vegetated dunes, and shrub- and forest-dominated wetlands, can mitigate hurricane impacts such as coastal flooding and erosion by increasing surface roughness and reducing wave energy. Land cover maps can be used as input to improve simulations of surface roughness in advanced hydro-morphological models. Consequently, there is a need for efficient tools to develop up-to-date land cover maps that include the accurate distribution of vegetation types prior to an extreme storm. In response, we developed the RUSH tool (Rapid remote sensing Updates of land cover for Storm and Hurricane forecast models). RUSH delivers high-resolution maps of coastal vegetation for near-real-time or historical conditions via a Jupyter Notebook application and a graphical user interface (GUI). The application generates 3 m spatial resolution land cover maps with classes relevant to coastal settings, especially along mainland beaches, headlands, and barrier islands, as follows: (1) open water; (2) emergent wetlands; (3) dune grass; (4) woody wetlands; and (5) bare ground. These maps are developed by applying one of two seasonal random-forest machine learning models to Planet Labs SuperDove multispectral imagery. Cool Season and Warm Season Models were trained on 665 and 594 reference points, respectively, located across study regions in the North Carolina Outer Banks, the Mississippi Delta in Louisiana, and a portion of the Florida Gulf Coast near Apalachicola. Cool Season and Warm Season Models were tested with 666 and 595 independent points, with an overall accuracy of 93% and 94%, respectively. The Jupyter Notebook application provides users with a flexible platform for customization for advanced users, whereas the GUI, designed with user-experience feedback, provides non-experts access to remote sensing capabilities. This application can also be used for long-term coastal geomorphic and ecosystem change assessments.

Florida, Louisiana, North Carolina↗
USGS2019

A preliminary assessment of hyperspectral remote sensing technology for mapping submerged aquatic vegetation in the Upper Delaware River National Parks

Hyperspectral remote sensing of submerged aquatic vegetation is a complex and difficult process that is affected by unique constraints on the energy flow profile near and below the water surface. In addition, shallow, winding, lotic systems, such as the Upper Delaware River, present additional remote sensing problems in the form of specular reflectance, variable depth and constituents in the water column and sometimes extremely weak signal strength due to absorption and scattering in the water column that can be statistically overwhelmed by the reflectance from upland vegetation in any individual image scene. Here we test hyperspectral imagery from the Civil Air Patrol’s (CAP), Airborne Real-time Cueing Hyperspectral Enhanced Recon (ARCHER) system in the scenic waters of two National Parks on the Upper Delaware River. A number of unique image processing problems were encountered, including specular reflectance from winding lotic systems, variable depth and flow dynamics of the riverine environment, and disproportionate signal strength from surface reflectance in this riverine environment. This were solved by applying a specular reflectance removal algorithm, applying field data collections to classification results and masking upland vegetation so as to not statistically overwhelm the weak reflectance signal from surface and near-surface water. Much was learned about conducting imaging spectroscopy in such difficult conditions. Significant results include successful mapping of SAV presenece/absence, advantages of upland masking of the reflectance signal, and a numkber of processing approaches that are unique to this environment. In this paper we summarize our results and identify unique issues that must be addressed in this environment

New Jersey, New York, Pennsylvania↗
USGS2011

Risk management in a large-scale CO2 geosequestration pilot project, Illinois, USA

Like most large-scale infrastructure projects, carbon dioxide (CO 2) geological sequestration (GS) projects have multiple success criteria and multiple stakeholders. In this context "risk evaluation" encompasses multiple scales. Yet a risk management program aims to maximize the chance of project success by assessing, monitoring, minimizing all risks in a consistent framework. The 150,000-km2 Illinois Basin underlies much of the state of Illinois, USA, and parts of adjacent Kentucky and Indiana. Its potential for CO2 storage is first-rate among basins in North America, an impression that has been strengthened by early testing of the injection well of the Midwest Geological Sequestration Consortium's (MGSC's) Phase III large scale demonstration project, the Illinois Basin - Decatur Project (IBDP). The IBDP, funded by the U.S. Department of Energy's National Energy Technology Laboratory (NETL), represents a key trial of GS technologies and project-management techniques. Though risks are specific to each site and project, IBDP risk management methodologies provide valuable experience for future GS projects. IBDP views risk as the potential for negative impact to any of these five values: health and safety, environment, financial, advancing the viability and public acceptability of a GS industry, and research. Research goals include monitoring one million metric tonnes of injected CO2 in the subsurface. Risk management responds to the ways in which any values are at risk: for example, monitoring is designed to reduce uncertainties in parameter values that are important for research and system control, and is also designed to provide public assurance. Identified risks are the primary basis for risk-reduction measures: risks linked to uncertainty in geologic parameters guide further characterization work and guide simulations applied to performance evaluation. Formally, industry defines risk (more precisely risk criticality) as the product L*S, the Likelihood multiplied by the Severity of negative impact. L and S are each evaluated on five-point scales, yielding a theoretical spread in risk values of 1 through 25. So defined, these judgment-based values are categorical and ordinal - they do not represent physically measurable quantities, but are nonetheless useful for comparison and therefore decision support. The "risk entities" first evaluated are FEPs - conceptual Features, Events, and Processes based on the list published by Quintessa Ltd. After concrete scenarios are generated based on selected FEPs, scenarios become the critical entities whose associated risks are evaluated and tracked. In IBDP workshops, L and S values for 123 FEPs were generated through expert elicitation. About 30 experts in the project or in GS in general were assigned among six facilitated working groups, and each group was charged to envision risks within a sphere of project operations. Working groups covered FEPs with strong spatial characteristics - such as those related to the injection wellbore and simulated plume footprint - and "nonspatial" FEPs related to finance, regulations, legal, and stakeholder issues. Within these working groups, experts shared information, examined assumptions, refined and extended the FEP list, calibrated responses, and provided initial L and S values by consensus. Individual rankings were collected in a follow-up process via emailed spreadsheets. For each of L and S, three values were collected: Lower Bound, Best Guess, and Upper Bound. The Lower-Upper Bound ranges and the spreads among experts can be interpreted to yield rough confidence measures. Based on experts' responses, FEPs were ranked in terms of their L*S risk levels. FEP rankings were determined from individual (not consensus or averaged) results, thus no high-risk responses were damped out. The higher-risk FEPs were used to generate one or more concrete, well defined risk-bearing scenarios for each FEP. Any FEP scored by any expert as having associated risk of

Conference Paper↗
USGS2009

A simple approach to distinguish land-use and climate-change effects on watershed hydrology

Impacts of climate change on watershed hydrology are subtle compared to cycles of drought and surplus precipitation (PPT), and difficult to separate from effects of land-use change. In the US Midwest, increasing baseflow has been more attributed to increased annual cropping than climate change. The agricultural changes have led to increased fertilizer use and nutrient losses, contributing to Gulf of Mexico hypoxia. In a 25-yr, small-watershed experiment in Iowa, when annual hydrologic budgets were accrued between droughts, a coupled water-energy budget (ecohydrologic) analysis showed effects of tillage and climate on hydrology could be distinguished. The fraction of PPT discharged increased with conservation tillage and time. However, unsatisfied evaporative demand (PET - Hargreaves method) increased under conservation tillage, but decreased with time. A conceptual model was developed and a similar analysis conducted on long-term (>1920s) records from four large, agricultural Midwest watersheds underlain by fine-grained tills. At least three of four watersheds showed decreases in PET, and increases in PPT, discharge, baseflow and PPT:PET ratios (p < 0.10). An analysis of covariance showed the fraction of precipitation discharged increased, while unsatisfied evaporative demand decreased with time among the four watersheds (p < 0.001). Within watersheds, agricultural changes were associated with ecohydrologic shifts that affected timing and significance, but not direction, of these trends. Thus, an ecohydrologic concept derived from small-watershed research, when regionally applied, suggests climate change has increased discharge from Midwest watersheds, especially since the 1970s. By inference, climate change has increased susceptibility of nutrients to water transport, exacerbating Gulf of Mexico hypoxia.

Journal of Hydrology↗
USGS2017

On extracting sediment transport information from measurements of luminescence in river sediment

Accurately quantifying sediment transport rates in rivers remains an important goal for geomorphologists, hydraulic engineers, and environmental scientists. However, current techniques for measuring long-time scale (102–106 years) transport rates are laborious, and formulae to predict transport are notoriously inaccurate. Here we attempt to estimate sediment transport rates by using luminescence, a property of common sedimentary minerals that is used by the geoscience community for geochronology. This method is advantageous because of the ease of measurement on ubiquitous quartz and feldspar sand. We develop a model from first principles by using conservation of energy and sediment mass to explain the downstream pattern of luminescence in river channel sediment. We show that the model can accurately reproduce the luminescence observed in previously published field measurements from two rivers with very different sediment transport styles. The model demonstrates that the downstream pattern of river sand luminescence should show exponential-like decay in the headwaters which asymptotes to a constant value with further downstream distance. The parameters from the model can then be used to estimate the time-averaged virtual velocity, characteristic transport lengthscale, storage time scale, and floodplain exchange rate of fine sand-sized sediment in a fluvial system. The sediment transport values predicted from the luminescence method show a broader range than those reported in the literature, but the results are nonetheless encouraging and suggest that luminescence demonstrates potential as a sediment transport indicator. However, caution is warranted when applying the model as the complex nature of sediment transport can sometimes invalidate underlying simplifications.

Journal of Geophysical Research F: Earth Surface↗
USGS2011

Selected approaches to estimate water-budget components of the High Plains, 1940 through 1949 and 2000 through 2009

The High Plains aquifer, underlying almost 112 million acres in the central United States, is one of the largest aquifers in the Nation. It is the primary water supply for drinking water, irrigation, animal production, and industry in the region. Expansion of irrigated agriculture throughout the past 60 years has helped make the High Plains one of the most productive agricultural regions in the Nation. Extensive withdrawals of groundwater for irrigation have caused water-level declines in many parts of the aquifer and increased concerns about the long-term sustainability of the aquifer. Quantification of water-budget components is a prerequisite for effective water-resources management. Components analyzed as part of this study were precipitation, evapotranspiration, recharge, surface runoff, groundwater discharge to streams, groundwater fluxes to and from adjacent geologic units, irrigation, and groundwater in storage. These components were assessed for 1940 through 1949 (representing conditions prior to substantial groundwater development and referred to as "pregroundwater development" throughout this report) and 2000 through 2009. Because no single method can perfectly quantify the magnitude of any part of a water budget at a regional scale, results from several methods and previously published work were compiled and compared for this study when feasible. Results varied among the several methods applied, as indicated by the range of average annual volumes given for each component listed in the following paragraphs. Precipitation was derived from three sources: the Parameter-Elevation Regressions on Independent Slopes Model, data developed using Next Generation Weather Radar and measured precipitation from weather stations by the Office of Hydrologic Development at the National Weather Service for the Sacramento-Soil Moisture Accounting model, and precipitation measured at weather stations and spatially distributed using an inverse-distance-weighted interpolation method. Precipitation estimates using these sources, as a 10-year average annual total volume for the High Plains, ranged from 192 to 199 million acre-feet (acre-ft) for 1940 through 1949 and from 185 to 199 million acre-ft for 2000 through 2009. Evapotranspiration was obtained from three sources: the National Weather Service Sacramento-Soil Moisture Accounting model, the Simplified-Surface-Energy-Balance model using remotely sensed data, and the Soil-Water-Balance model. Average annual total evapotranspiration estimated using these sources was 148 million acre-ft for 1940 through 1949 and ranged from 154 to 193 million acre-ft for 2000 through 2009. The maximum amount of shallow groundwater lost to evapotranspiration was approximated for areas where the water table was within 5 feet of land surface. The average annual total volume of evapotranspiration from shallow groundwater was 9.0 million acre-ft for 1940 through 1949 and ranged from 9.6 to 12.6 million acre-ft for 2000 through 2009. Recharge was estimated using two soil-water-balance models as well as previously published studies for various locations across the High Plains region. Average annual total recharge ranged from 8.3 to 13.2 million acre-ft for 1940 through 1949 and from 15.9 to 35.0 million acre-ft for 2000 through 2009. Surface runoff and groundwater discharge to streams were determined using discharge records from streamflow-gaging stations near the edges of the High Plains and the Base-Flow Index program. For 1940 through 1949, the average annual net surface runoff leaving the High Plains was 1.9 million acre-ft, and the net loss from the High Plains aquifer by groundwater discharge to streams was 3.1 million acre-ft. For 2000 through 2009, the average annual net surface runoff leaving the High Plains region was 1.3 million acre-ft and the net loss by groundwater discharge to streams was 3.9 million acre-ft. For 2000 through 2009, the average annual total estimated groundwater pumpage volume from two soil-water-balance models ranged from 8.7 to 16.2 million acre-ft. Average annual irrigation application rates for the High Plains ranged from 8.4 to 16.2 inches per year. The USGS Water-Use Program published estimated total annual pumpage from the High Plains aquifer for 2000 and 2005. Those volumes were greater than those estimated from the two soil-water-balance models. Total groundwater in storage in the High Plains aquifer was estimated as 3,173 million acre-ft prior to groundwater development and 2,907 million acre-ft in 2007. The average annual decrease of groundwater in storage between 2000 and 2007 was 10 million acre-ft per year.

High Plains Aquifer↗
USGS2022

Remote sensing of field-scale irrigation withdrawals in the central Ogallala aquifer region

For agricultural areas facing water scarcity, sustainable water use policy relies on irrigation information that is timely and at a high resolution, but existing publicly available water use data are often insufficient for monitoring compliance or understanding the influence of policy on individual farmer decisions. This study attempts to fill this data gap by using remote sensing to map annual irrigation quantity at the field-scale within the central Ogallala aquifer region of the United States. We compiled in situ annual irrigation volume data at the field scale in the Republican River Basin of Colorado for 2015–2018 and at the Public Land Survey System (PLSS) section scale in western Kansas for 2000–2016, which served as reference data in random forest models that relied on Landsat-based actual evapotranspiration from the Operational Simplified Surface Energy Balance model (SSEBop) along with maps of irrigated area, Landsat spectral indices, climate, soils, and derived hydrologic variables. The models explained 87% of the variability in irrigation volume in Colorado and 75% in Kansas, but accuracy declined when transferring the models in spatial cross-validation (Colorado R 2 =0.81; Kansas R 2 =0.51) and temporal cross-validation (Colorado R 2 =0.82; Kansas R 2 =0.68). Predicted annual totals of irrigation volume in western Kansas had a mean absolute error of 11.9%, which was slightly higher than the average annual change of 11%. Use of predicted irrigation maps also lead to an underestimated effect size for a water use restriction policy in Kansas. These results indicate that field- and section-scale irrigation can be mapped with reasonable accuracy within a region and time period that has adequate sample data, but that methods may need to be improved for applying the models more broadly in areas that lack extensive in situ irrigation data to support further research on water use and aid in structuring policy.

Colorado Kansas↗
USGS1997

One minute after: Strong-motion map, effective epicenter, and effective magnitude

This article reports the recent progress on real-time seismic monitoring in Taiwan, particularly the real-time strong-motion monitoring by the Taiwan Central Weather Bureau's telemetered seismic network ( CWBSN ), which is presently aiming at rapid reporting immediately after a large earthquake occurrence. If rapid reporting can be achieved before the arrival of the strong shaking, earthquake early warning will become possible. CWBSN has achieved the generation of the intensity map, epicenter, and magnitude within 1 min of the occurrence of a large earthquake. Both rapid reporting and early warning are principally applied to large ( M ≫ 5) events; the requirement of on-scale waveform recording prompted CWBSN in 1995 to integrate strong-motion sensors (e.g., force-balance accelerometers) into its telemetered seismic monitoring system. Time-domain recursive processing is applied to the multi-channel incoming seismic signals by a group of networked personal computers to generate the intensity map. From the isoseismal contours, an effective epicenter is immediately identified that resides in the middle of the largest (usually the 100-gal) contour curve of the intensity map. An effective magnitude is also defined that can be derived immediately from the surface area covered by the largest (usually the 100-gal) contour curve. For a large event with a finite rupture surface, the epicenter and magnitude so derived are more adequate estimates of the source location and of the strength of destruction. The effective epicenter gives the center of the damage area; it stands in contrast with the conventional epicenter location, which only gives the initial point of rupture nucleation. The effective magnitude reflects more closely the earthquake damage potential, instead of the classical magnitude definition that emphasizes the total energy release. The CWBSN has achieved in obtaining the above crucial source information well within 1 min. This time can further be reduced to better than 30 sec, as illustrated by the example in this article, showing that earthquake early warning is indeed an achievable goal. The rapid reporting and early warning information is electronically transmitted to users to allow rapid response actions, with or without further human intervention.

Bulletin of the Seismological Society of America↗
USGS2018

Spatial spectroscopic models for remote exploration

Ancient hydrothermal systems are a high-priority target for a future Mars sample return mission because they contain energy sources for microbes and can preserve organic materials (Farmer, 2000 ; MEPAG Next Decade Science Analysis Group, 2008 ; McLennan et al., 2012 ; Michalski et al., 2017 ). Characterizing these large, heterogeneous systems with a remote explorer is difficult due to communications bandwidth and latency; such a mission will require significant advances in spacecraft autonomy. Science autonomy uses intelligent sensor platforms that analyze data in real-time, setting measurement and downlink priorities to provide the best information toward investigation goals. Such automation must relate abstract science hypotheses to the measurable quantities available to the robot. This study captures these relationships by formalizing traditional “science traceability matrices” into probabilistic models. This permits experimental design techniques to optimize future measurements and maximize information value toward the investigation objectives, directing remote explorers that respond appropriately to new data. Such models are a rich new language for commanding informed robotic decision making in physically grounded terms. We apply these models to quantify the information content of different rover traverses providing profiling spectroscopy of Cuprite Hills, Nevada. We also develop two methods of representing spatial correlations using human-defined maps and remote sensing data. Model unit classifications are broadly consistent with prior maps of the site's alteration mineralogy, indicating that the model has successfully represented critical spatial and mineralogical relationships at Cuprite. Key Words: Autonomous science—Imaging spectroscopy—Alteration mineralogy—Field geology—Cuprite—AVIRIS-NG—Robotic exploration. Astrobiology 18, 934–954.

Astrobiology↗
USGS2014

USGS ecosystem research for the next decade: advancing discovery and application in parks and protected areas through collaboration

Ecosystems within parks and protected areas in the United States and throughout the world are being transformed at an unprecedented rate. Changes associated with natural hazards, greenhouse gas emissions, and increasing demands for water, food, land, energy and mineral resources are placing urgency on sound decision making that will help sustain our Nation’s economic and environmental well-being (Millennium Ecosystem Assessment, 2005). In recognition of the importance of science in making these decisions, the U.S. Geological Survey (USGS) in 2007 identified ecosystem science as one of six science directions included in a comprehensive decadal strategy (USGS 2007). The Ecosystems Mission Area was identified as essential for integrating activity within the USGS and as a key to enhanced integration with other Federal and private sector research and management organizations (Myers at al., 2007). This paper focuses on benefits to parks and protected areas from the USGS Ecosystems Mission Area plan that expanded the scope of the original 2007 science strategy, to identify the Bureau’s work in ecosystem science over the next decade (Williams et al., 2013). The plan describes a framework that encompasses both basic and applied science and allows the USGS to continue to contribute meaningfully to conservation and management issues related to the Nation’s parks and ecological resources. This framework relies on maintaining long-standing, collaborative relationships with partners in both conducting science and applying scientific results. Here we summarize the major components of the USGS Ecosystems Science Strategy, articulating the vision, goals and strategic approaches, then outlining some of the proposed actions that will ultimately prove useful to those managing parks and protected areas. We end with a discussion on the future of ecosystem science for the USGS and how it can be used to evaluate ecosystem change and the associated consequences to management of our Nation’s natural resources.

The George Wright Forum↗
USGS2020

Resolving small-scale forest snow patterns using an energy-balance snow model with a 1-layer canopy

Modelling spatiotemporal dynamics of snow in forests is challenging, as involved processes are strongly dependent on small-scale canopy properties. In this study, we explore how local canopy structure information can be integrated in a medium-complexity energy-balance snow model to replicate observed snow patterns at very high spatial resolutions. Snow depth distributions simulated with the Flexible Snow Model (FSM2) were tested against extensive experimental data acquired in discontinuous subalpine forest stands in Eastern Switzerland over three winters. While the default canopy implementation in FSM2 fails to capture the observed snow depth variability, performance is considerably improved when local canopy cover fraction and hemispherical sky view fraction are additionally accounted for (30% reduction in RMSE). However, realistic snow depth distribution patterns throughout the season are only achieved if effective temperatures of near and distant canopy elements are discerned, and if a mechanism to mimic preferential deposition of snow in canopy gaps is included. We demonstrate that by diversifying the canopy structure input in order to reflect respective portions of the canopy relevant to different processes, even a simple model based on widely used process parametrizations and canopy metrics can be applied for high-resolution simulations of the sub-canopy snow cover with just a few modifications. The presented approaches could be implemented in commonly used land surface models, allowing upscaling experiments and development of sub-grid parametrizations without necessitating complex high-resolution models.

Water Resources Research↗
USGS2012

3-D reconstructions of subsurface Pleistocene basalt flows from paleomagnetic inclination data and 40 Ar/ 39 Ar ages in the southern part of the Idaho National Laboratory (INL), Idaho (USA)

The U. S. Geological Survey, in cooperation with the U.S. Department of Energy, is mapping the distribution of basalt flows and sedimentary interbeds at the Idaho National Laboratory in three dimensions to provide data for refining numerical models of groundwater flow and contaminant transport in the eastern Snake River Plain aquifer. Paleomagnetic inclination and polarity data from basalt samples from 47 coreholes are being used to create a three-dimensional (3-D) model of the subsurface of the southern part of the INL. Surface and sub-surface basalt flows can be identified in individual cores and traced in three dimensions on the surface and in the subsurface for distances of more than 20 km using a combination of paleomagnetic, stratigraphic, and 40 Ar/ 39 Ar data. Eastern Snake River Plain olivine tholeiite basalts have K 2 O contents of 0.2 to 1.0 weight per cent. In spite of the low-K content, high-precision 40 Ar/ 39 Ar ages were obtained by applying a protocol that employs short irradiation times (minimizing interferences from Ca derived 36 Ar), frequent measurement of various size atmospheric Ar pipettes to monitor and correct for temporal variation, and signal size dependent nonlinearity in spectrometer mass bias, resulting in age dates with resolution generally between 2 to 10% of the age. 3-D models of subsurface basalt flows are being used to: (1) Estimate eruption volumes; (2) locate the approximate vent areas and extent of sub-surface flows; and (3) Help locate high and low transmissivity zones. Results indicate that large basalt eruptions (>3 km 3 ) occurred at and near the Central Facilities Area between 637 ka and 360 ka; at and near the Radioactive Waste Management Complex before 540 ka; and north of the Naval Reactors Facility at about 580 ka. Since about 360 ka, large basalt flows have erupted along the Arco-Big Southern Butte Volcanic Rift Zone and the Axial Volcanic Zone, and flowed northerly towards the Central Facilities Area. Basalt eruptions shifted the course of the Big Lost River from a more southerly course to its present one.

Idaho↗
USGS2007

Formation of tellurium nanocrystals during anaerobic growth of bacteria that use Te oxyanions as respiratory electron acceptors

Certain toxic elements support the metabolism of diverse prokaryotes by serving as respiratory electron acceptors for growth. Here, we demonstrate that two anaerobes previously shown to be capable of respiring oxyanions of selenium also achieve growth by reduction of either tellurate [Te(VI)] or tellurite [Te(IV)] to elemental tellurium [Te(0)]. This reduction achieves a sizeable stable-Te-isotopic fractionation (isotopic enrichment factor [ε] = −0.4 to −1.0 per ml per atomic mass unit) and results in the formation of unique crystalline Te(0) nanoarchitectures as end products. The Te(0) crystals occur internally within but mainly externally from the cells, and each microorganism forms a distinctly different structure. Those formed by Bacillus selenitireducens initially are nanorods (∼10-nm diameter by 200-nm length), which cluster together, forming larger (∼1,000-nm) rosettes composed of numerous individual shards (∼100-nm width by 1,000-nm length). In contrast, Sulfurospirillum barnesii forms extremely small, irregularly shaped nanospheres (diameter < 50 nm) that coalesce into larger composite aggregates. Energy-dispersive X-ray spectroscopy and selected area electron diffraction indicate that both biominerals are composed entirely of Te and are crystalline, while Raman spectroscopy confirms that they are in the elemental state. These Te biominerals have specific spectral signatures (UV-visible light, Raman) that also provide clues to their internal structures. The use of microorganisms to generate Te nanomaterials may be an alternative for bench-scale syntheses. Additionally, they may also generate products with unique properties unattainable by conventional physical/chemical methods.

Applied and Environmental Microbiology↗