Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Frontiers in Ecology and Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,674 records · Page 20Linked to original sources
USGS2025

Emerging investigator series: Post-wildfire sediment geochemical characterization reveals manganese reactivity and a potential link to water quality impairment in the Gallinas Creek watershed, New Mexico

Water quality post-wildfire is often impaired by increased turbidity and elevated concentrations of elements such as manganese (Mn) and iron (Fe). Precipitation events exacerbate these issues, due in part to increased erosion and transport of sediment from hillslopes to surface water. Both Mn and Fe are major redox-active elements in sediments that drive a variety of biogeochemical cycles, precipitate adsorptive phases, and can themselves be drinking water contaminants. By investigating Mn and Fe sediment geochemistry in post-wildfire sediment deposits, related water quality hazards can be assessed. To establish and strengthen this connection, we analyzed the geochemistry of sediment deposits and surface water in the Gallinas Creek watershed, New Mexico over 1.5 years post-wildfire. Analyses included particle size analysis, water extractions, sequential extractions and aqua regia extractions to determine metal partitioning in sediment deposits. Data demonstrate Mn concentrations were distributed across labile and reactive fractions, such as the exchangeable and oxyhydroxide fractions, while Fe concentrations were mainly associated with the residual fraction. Manganese concentrations in aqua regia extractions and several fractions of sequential extractions were also strongly and significantly correlated with fine-grained sediment while the same pools of Fe concentrations were not. Dissolved Mn concentrations in surface water were elevated (>50 μg L −1 ) multiple times over the 1.5 years post-wildfire, highlighting a relationship between sediment geochemistry and water quality. This work shows Mn in sediments mobilized post-wildfire has an influence on water quality and highlights how further investigation into Mn sediment redox processes and mineralogy post-wildfire can inform risk assessments and resource management.

New Mexico↗
USGS1999

Environmental setting and water-quality issues in the lower Tennessee River basin

The goals of the National Water-Quality Assessment Program are to describe current water-quality conditions for a large part of the Nation's water resources, identify water-quality changes over time, and identify the primary natural and human factors that affect water quality. The lower Tennessee River Basin is one of 59 river basins selected for study. The water-quality assessment of the lower Tennessee River Basin study unit began in 1997. The lower Tennessee River Basin study unit encompasses an area of about 19,500 square miles and extends from Chattanooga, Tennessee, to Paducah, Kentucky. The study unit had a population of about 1.5 million people in 1995. The study unit was subdivided into subunits with relatively homogeneous geology and physiography. Subdivision of the study unit creates a framework to assess the effects of natural and cultural settings on water quality. Nine subunits were delineated in the study unit; their boundaries generally coincide with level III and level IV ecoregion boundaries. The nine subunits are the Coastal Plain, Transition, Western Highland Rim, Outer Nashville Basin, Inner Nashville Basin, Eastern Highland Rim, Plateau Escarpment and Valleys, Cumberland Plateau, and Valley and Ridge.The lower Tennessee River Basin consists of predominantly forest (51 percent) and agricultural land (40 percent). Activities related to agricultural land use, therefore, are the primary cultural factors likely to have a widespread effect on surface- and ground-water quality in the study unit. Inputs of total nitrogen and phosphorus from agricultural activities in 1992 were about 161,000 and 37,900 tons, respectively. About 3.7 million pounds (active ingredient) of pesticides was applied to crops in the lower Tennessee River Basin in 1992. State water-quality agencies identified nutrient enrichment and pathogens as water-quality issues affecting both surface and ground water in the lower Tennessee River Basin. Water-quality data collected by State and Federal agencies between 1980 and 1996 were summarized to characterize surface- and ground-water quality of the subunits with respect to these issues. Median concentrations of nitrogen species generally were less than 1 milligram per liter in surface and ground water in all subunits, and were highest throughout the subunits that had the largest percentages of agricultural land use. Median phosphorus concentrations also were less than 1 milligram per liter in all subunits. Phosphatic limestones present in two subunits had a larger effect on phosphorus concentrations in surface and ground water than did the amount of agricultural land use in these subunits. Median counts of fecal coliform were higher in surface water than in ground water in all subunits. The highest median counts in surface water were in the Valley and Ridge (7,500 colonies per 100 milliliters) and the Outer Nashville Basin subunits (5,000 colonies per 100 milliliters). Highest median counts in ground water were in the Inner and Outer Nashville Basin subunit. Natural setting likely has an important effect with respect to fecal contamination of surface and ground water in the lower Tennessee River Basin.

Alabama, Georgia, Kentucky, Mississippi, Tennessee↗
USGS2025

Critical minerals in orogenic (gold) and Coeur d’Alene-type mineral systems of the United States

Orogenic and Coeur d’Alene-type mineral systems are produced by metamorphic devolatilization of thick volcanic or siliciclastic sedimentary rock sequences and the focused flow of hydrothermal fluids upwards along crustal-scale faults. Most orogenic systems are found along the Cordilleran orogen, stretching from California northwards into Alaska, whereas most Coeur d’Alene-type systems occur in the Proterozoic Belt Basin in Idaho and Montana. Although the deposit types in these systems are exploited for precious and base metals, potential exists for the production of critical minerals necessary for current (2025) societal needs in the United States. Publicly available geochemical data compiled for these mineral systems, coupled with mineralogical characteristics, indicate that several critical minerals could potentially be recovered from unmined resources and processed mine waste: arsenic, antimony, tellurium, cobalt, and tungsten from orogenic gold deposits and zinc, antimony, arsenic, and manganese from Coeur d’Alene-type systems. These critical minerals reside primarily in arsenopyrite (arsenic), scheelite (tungsten), siderite (manganese), sphalerite (zinc), tetrahedrite (antimony and arsenic), stibnite (antimony), and telluride (tellurium) minerals.

continental United States↗
USGS2025

Hydraulic conductivity and transmissivity estimates from slug tests in wells within the Mississippi Alluvial Plain, Arkansas and Mississippi, 2020

During the spring and summer of 2020, the U.S. Geological Survey conducted single-well slug tests on selected observation wells within the Mississippi Alluvial Plain in Arkansas and Mississippi to estimate hydraulic conductivity and transmissivity values for the Mississippi River Valley alluvial and middle Claiborne aquifers. Well and aquifer data were collected from field measurements, well-construction reports, and published aquifer-thickness information. A total of 324 slug-in and slug-out tests were conducted on 48 wells by using mechanical slugs to displace the water column and submersible pressure transducers to record changes in water levels in the wells. Hydraulic conductivity of the aquifers in which the wells are screened was estimated by curve fitting the water-level-change data using aquifer test analysis software. Estimates of aquifer transmissivity were made by multiplying the estimated hydraulic conductivity value by the aquifer thickness at well locations. Mean hydraulic conductivity estimates for 44 observation wells screened in the Mississippi River Valley alluvial aquifer range from 3 to 401 feet per day, and mean transmissivity estimates range from 285 to 80,559 feet squared per day. Mean hydraulic conductivity estimates for four observation wells screened in units of the middle Claiborne aquifer range from 0.14 to 183 feet per day, and mean transmissivity estimates range from 55 to 67,913 feet squared per day. The results from these tests can be used to improve the understanding of water availability and groundwater migration, to refine groundwater models, and to ultimately provide stakeholders and decisionmakers better information for management of the groundwater resources within the Mississippi Alluvial Plain.

Arkansas, Mississippi↗
USGS2025

Paleomagnetic correlation of surface and subsurface basalt flows in the central and southwestern part of the Idaho National Laboratory, Idaho

The U.S. Geological Survey, in cooperation with the U.S. Department of Energy, used paleomagnetic data from 22 coreholes to construct 3 fence diagrams of subsurface basalt flows in the southern part of the Idaho National Laboratory. These diagrams provide comprehensive descriptions of the horizontal and vertical distribution of basalt flows and sediment layers beneath the surface, aiding geological studies and contributing valuable data to numerical models of groundwater flow and contaminant transport. The correlations established though these diagrams include spatial correlations between basalt flows found in multiple coreholes. Correlations were identified by matching average paleomagnetic inclinations and confirming or denying these correlations using petrology, geochemistry and radiometric ages. The fence diagrams aid in identifying potential locations of subsurface vents, volcanic vents that have been buried by more recent volcanic activity, associated to subsurface basalt flows. By tracing the subsurface flows and analyzing where the greatest thickness occurs, the locations of buried vents can be inferred. Some subsurface flows exhibit correlations across several coreholes and may indicate yet unidentified surface or buried vents, thereby enhancing our understanding of the volcanic history and subsurface geology of the region.

Idaho↗
USGS1992

Description and effects of 1988 drought on ground-water levels, streamflow, and reservoir levels in Indiana

Documentation of the 1988 drought in Indiana was undertaken to aid water-management agencies and planners concerned with periods of below-normal precipitation and their effect on commercial, agricultural, and residential water use. Precipitation, temperature, Palmer Drought Severity Indices, and ground- and surface-water levels from water years 1988 and 1989 were compared to the historical record to evaluate severity, extent, and duration of the 1988 drought in Indiana. Three types of drought-climatological, hydrologic, and agricultural--occurred in most of Indiana during water years 1988 and 1989. The drought began toward the end of calendar year 1987 as annual precipitation decreased to 4.6 inches below the long term mean. By the end of September 1988, statewide precipitation deficits had increased to almost 8 inches below normal. High temperatures during the summer months increased the stress on crops, livestock, and people. Northwest Indiana experienced the second warmest June-August on record. Palmer Drought Severity Indices indicated that a moderate-to-severe drought had occurred in Indiana during most of 1988. Ground-water levels were affected substantially in many areas of the State. Record low-water levels were observed at 12 of the 20 monitoring wells included in this report. A go-day ground-water emergency was declared in parts of northwestern Indiana. Streamflow throughout the State was affected to varying degrees by the drought. Annual mean discharge in some rivers was only slightly less than the mean annual discharge, while others flowed at less than half that value. The effects of low streamflows were felt by many as electric power plants reduced or ceased production and public-water utilities requested conservation measures by their customers. Major reservoirs in the State approached or reached record low levels, causing water supplies as well as recreational activities to be diminished. Most major crops produced in Indiana were affected by the dry conditions. Average yields in 1988 ranged from 50 to 86 percent of 1987 yields.

Indiana↗
USGS2000

Method for estimating water use and interbasin transfers of freshwater and wastewater in an urbanized basin

Techniques for management of drainage basins that use water budgets to balance available water resources with actual or anticipated water use require accurate and precise estimates of basin withdrawals, interbasin transfers of freshwater, unaccounted-for use, water use, consumptive use, inflow and infiltration, basin return flow, and interbasin transfers of wastewater. Frequently, interbasin transfers of freshwater and wastewater are not included in basin water budgets because they occur within public water-delivery and wastewater-collection systems. A new 10-step method was developed to improve estimates of inflow and infiltration and interbasin transfers using readily available statewide data. The accuracy and precision of water-use estimates determined by this method are improved through careful application of coefficients for small users and the use of metered values for large users. The method was developed and tested with data for the Ten Mile River Basin in southeastern Massachusetts. This report uses examples from the basin to illustrate each step of the method.

Massachusetts↗
USGS2024

Improving crop-specific groundwater use estimation in the Mississippi Alluvial Plain: Implications for integrated remote sensing and machine learning approaches in data-scarce regions

Study region The Mississippi Alluvial Plain (MAP) in the United States (US). Study focus Understanding local-scale groundwater use, a critical component of the water budget, is necessary for implementing sustainable water management practices. The MAP is one of the most productive agricultural regions in the US and extracts more than 11 km 3 /year for irrigation activities. Consequently, groundwater-level declines in the MAP region pose a substantial challenge to water sustainability, and hence, we need reliable groundwater pumping monitoring solutions to manage this resource appropriately. New hydrological insights for the region We incorporate remote sensing datasets and machine learning to improve an existing lookup table-based model of groundwater use previously developed by the U.S. Geological Survey (USGS). Here, we employ Distributed Random Forests, an ensemble machine learning algorithm to predict annual and monthly groundwater use (2014–2020) throughout this region at 1-km resolution, using pumping data from existing flowmeters in the Mississippi Delta. Our model compares favorably with the existing USGS model, with higher R 2 (0.51 compared to 0.42 in the previous model), and lower root mean square error (RMSE) and mean absolute error (MAE)— 0.14 m and 0.09 m, respectively in our model, compared to 0.15 m and 0.1 m in the previous model. Therefore, this work advances our ability to predict groundwater use in regions with scarce or limited in-situ groundwater withdrawal data availability.

Journal of Hydrology Regional Studies↗
USGS2025

Hydrogeology and groundwater quality in the Snake River alluvial aquifer at Jackson Hole Airport, Wyoming, 2011–20

The Snake River alluvial aquifer underlying the Jackson Hole Airport (JHA) in northwest Wyoming is an important source of water used for domestic, commercial, and irrigation purposes by the airport and nearby residents. The U.S. Geological Survey, in response to previously identified water-quality concerns in the area, monitored and evaluated changes in hydrogeologic characteristics and groundwater-quality conditions of the alluvial aquifer during 2011–20. During that period, the Jackson Hole Airport made several changes that potentially improved water quality at and downgradient from the airport. Well, water level, and hydrogeologic data were collected from the alluvial aquifer to identify hydrogeologic characteristic and groundwater quality changes. Additionally, results of statistical tests were applied to water-quality results to evaluate trends in selected physical properties and constituent concentrations with time. The trends of those data show that water quality did improve overall during the study period compared to previously collected data. Presumably, these trends are in response to the changes in the aircraft deicing/anti-icing fluid (ADAF) formulation used by the JHA, the many JHA infrastructure improvements made during 2011–20, the degradation of existing ADAFs in subsurface soils and groundwater, or some combination of these possibilities.

Wyoming↗
USGS2025

Spatiotemporal variations in strain release and seismic rupture in multifault systems: An example from Panamint Valley, southeastern California

Geometrically complex, multifault ruptures have been observed in recent, damaging earthquakes in southeastern California, sparking renewed efforts to identify physical conditions that promote or inhibit fault discontinuity-spanning coseismic ruptures. The likelihood of ruptures propagating across fault discontinuities is thought to be partly controlled by fault geometries, rupture direction, and the history of strain release. However, these parameters vary in space and time over multiple earthquake cycles, making it difficult to forecast the likelihood that an earthquake on one fault will trigger rupture on a nearby fault. Here we use tectono-geomorphic mapping of a geometrically complex fault zone in Panamint Valley, southeastern California, to assess spatiotemporal variations of paleo-rupture patterns and geometries of fault discontinuities over multiple earthquake cycles. First, we identify ten generations of late Pleistocene to Holocene alluvium using geomorphic parameters and luminescence dating to constrain ages of alluvium and bracket late Holocene earthquake timing. Then, we quantify slip kinematics using high-resolution structure from motion digital surface models. We find the Panamint Valley transtensional relay (PVTR) hosted four late Holocene earthquakes, bracketed to ~5.8–3.4 ka, ~3.8–2.2 ka, ~2.4–0.6 ka, and ~0.64–0.16 ka, with ~0.6–1.1 m of slip per event, correlative to Mw ≈ 6.7–6.9 earthquakes. Additionally, we find similarities in earthquake timing on the Ash Hill, PVTR, and Panamint Valley faults and similarities in the slip magnitude and slip kinematics between the Ash Hill and PVTR faults, implying that the PVTR may co-rupture with nearby faults. Paleo-rupture patterns indicate that seismogenic strain transfer may occur through the PVTR, along different combinations of fault segments and jump distances, over multiple earthquake cycles. These data highlight the utility of tectono-geomorphic mapping in evaluating paleo-rupture patterns and suggest that the PVTR may act to propagate and/or arrest rupture between the Ash Hill and Panamint Valley faults.

California↗
USGS2026

Temporal and spatial changes in seismic attenuation associated with inferred fluid migration in the 2016 central Apennines earthquake sequence

Prior work suggests that high‐frequency seismic attenuation acts as a highly sensitive proxy for crustal permeability and fluid mobility in fractured media. We test the hypothesis that the fault system responsible for the 2016–2017 Amatrice–Visso–Norcia–Capitignano sequence acted as an impermeable seal, compartmentalizing pressurized fluids until dynamic rupture triggered widespread fluid diffusion. By tracking across the sequence the spatiotemporal evolution of the S ‐wave anelastic attenuation parameter, we identify large, positive low‐frequency attenuation anomalies emerging within the hanging wall following the Amatrice mainshock and strictly preceding subsequent large ruptures. Conversely, we observe weaker, negative anomalies in the footwall, anticorrelated in time with those of the hanging wall, revealing a massive asymmetry in fluid redistribution and permeability evolution across the fault system. Furthermore, aftershock migration rates reveal distinct linear alignments in a distance‐reduced time space, allowing us to explicitly track and quantify episodes of lateral and upward fluid migration. These physically consistent patterns suggest that stress‐driven fluid diffusion directly weakens adjacent fault patches, dictating the spatiotemporal migration of seismicity. We conclude that near‐real‐time monitoring of seismic attenuation may help detect fluid redistribution in active fault systems and may provide useful information for time‐dependent seismic hazard assessment.

central Apennines↗
USGS2026

Predictions of anthropogenic background PFAS concentrations in soil and relation to bedrock lithology and groundwater quality

Detectable concentrations of per- and polyfluoroalkyl substances (PFAS) have been observed in soils in remote areas and presumably originate from atmospheric deposition. These anthropogenic background concentrations may enable some PFAS to leach to groundwater at levels that exceed regulatory criteria for drinking water. However, anthropogenic background soil concentrations and their connection to groundwater are not well characterized. We developed a boosted regression tree model to predict perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) concentrations in shallow soils across northern New England. Low soil pH was the most important predictor of elevated anthropogenic PFOS and PFOA concentrations in background soils, rather than potential PFAS sources, land use, or population density. Total organic carbon (TOC) was also an important predictor for PFOS soil concentrations. Model predictions indicate that 73% of the shallow soils within Maine, Vermont, and New Hampshire exceed New Hampshire’s Soil Remediation Standard for PFOS (0.5 ng/g) and 41% exceed the PFOA standard (0.4 ng/g). Analysis of soil model results and groundwater data suggests that areas with high soil pH are associated with higher groundwater detection frequencies, illustrating how areas with less retention in soil are, conversely, also areas with potentially greater groundwater vulnerability. Further analysis indicates that groundwater may be more vulnerable in calcareous lithologies.

Maine, New Hampshire, Vermont↗
USGS2025

Per- and polyfluoroalkyl substances (PFAS) mass flux and mass balance at an aqueous film-forming foam release site in semiarid eastern New Mexico, USA

Passive flux meters (PFMs) directly measure groundwater chemistry mass flux and Darcy flux, providing insight into contaminant source-zone architecture and transport properties. This study uses PFMs to characterize PFAS flux in groundwater at a semiarid site with a thick (greater than 90-m) unsaturated zone where groundwater has been contaminated with per - and polyfluoroalkyl substances (PFAS) related to the use of aqueous film-forming foam (AFFF) for fire training and fire suppression. PFAS mass discharge (PFAS mass flux integrated over a control plane) in groundwater downgradient from several PFAS release areas is calculated using PFM results. In groundwater downgradient from fire-training areas, total PFAS mass discharge (summed across 14 compounds) was estimated to be between 6.0 and 31 g per day in 2020 and between 5.9 and 23 g per day in 2021. Site-specific documentation, generic information on AFFF properties, and literature values of PFAS concentration in AFFF are used to estimate site-specific PFAS-application rates at fire-training areas. These PFAS-application rates are compared to groundwater PFAS-discharge rates. Results suggest that transformation processes (exact pathways unknown) have led to increased discharge of measured PFAS in groundwater relative to initial AFFF formulations. The mass balance approach has broad applicability as a high-level approach that can provide insight into PFAS transport at AFFF sites.

New Mexico↗
USGS2025

Climate change and future water availability in the United States

The steady rise in global temperature as a result of human activity is causing changes in Earth’s water cycle. The balance of water stored within and moving between vapor, liquid, and frozen states in the water cycle is shifting, with consequences for water availability that include increases in drought, fire weather, flooding, and heavy precipitation, as well as cryosphere decline and sea-level rise. In this chapter of the U.S. Geological Survey Integrated Water Availability Assessment—2010–20, we provide an overview of climate-change observations and projections from Earth-system model simulations that relate to future water availability, from global and national climate assessments and from the published literature. Effects of climate change on primary water-cycle components are discussed in context of how global-scale hydroclimate drivers influence regional processes within the United States. Understanding the major climate drivers impacting the water cycle is crucial to predicting future changes in water availability and developing adaptation strategies to ensure human and ecosystem water supplies. First, we provide background information on the water cycle, the climate-model ensemble simulations developed to produce projections based on warming scenarios, and attribution and certainty levels. Tipping points, self-reinforcing feedbacks, cascading effects, and compound extremes are introduced. The framework of climatic impact drivers (CIDs) outlined in the Intergovernmental Panel on Climate Change Sixth Assessment Report (IPCC AR6) is used to show primary drivers of physical change to the water cycle and to understand and predict changes in future water availability. Specific climate-change related observations and projections are discussed for water cycle components of precipitation, evapotranspiration, soil moisture, streamflow, lakes and wetlands, ice and snow, and groundwater, as well as their implications for future water availability for humans and ecosystems. The chapter concludes with a synthesis discussion of three examples of complex regional-scale hydroclimate processes that influence water availability for populations in the United States, including (1) mountain and coastal precipitation, (2) aridification and drought, and (3) the influence of forest-cover change on terrestrial water-vapor recycling.

Professional Paper↗
USGS2025

Characterization of stream water quality and groundwater levels in the Central Pine Barrens region, Suffolk County, New York, 2017–23

The area locally known as the “Central Pine Barrens” region, located in Suffolk County, New York, contains most of Long Island’s preserved and undeveloped land. This region overlays an aquifer system that provides potable groundwater for residents of Suffolk County. Between 2017 and 2023, the U.S. Geological Survey, in cooperation with the Central Pine Barrens Joint Planning & Policy Commission and the Town of Brookhaven, monitored groundwater levels and stream water quality in this region. Groundwater levels were measured monthly at five wells and continuously (15-minute intervals) at a sixth well. Water quality was monitored at five locations in the Carmans River and at two locations in the Peconic River, and samples were analyzed for major ions, trace elements, nutrients, pharmaceuticals, and pesticides. The major ion compositions at the sites were mainly sodium-chloride type waters, and compositions varied the most at the furthest upstream sites in both streams. Concentrations above aquatic-life criteria thresholds also occurred most frequently at the furthest upstream sites. The seasonal patterns of nutrient loads and concentrations varied between the Carmans and Peconic Rivers. Several organic compounds including pharmaceuticals, domestic use products, and pesticides were detected at low concentrations in both streams. Metformin was the most frequently detected pharmaceutical compound, and herbicides were the most frequently detected pesticide class. Water-quality conditions influenced by anthropogenic contributions are a result of current and historical land use, and these contributions include onsite wastewater disposal systems, commercial or domestic fertilizers and pesticides, and urban or industrial contaminants in road runoff. This study characterizes and improves understanding of the current hydrologic conditions in the Central Pine Barrens region and the study findings can help inform the development of plans to manage, protect, and restore water resources.

New York↗
USGS1996

Technique for estimating magnitude and frequency of peak flows in Maryland

A convenient and reliable technique for estimating flood magnitudes is required for effective flood-plain management and for the efficient design of bridges, culverts, embankments, and flood-protection structures. Methods are presented for estimating peak-flow magnitudes of selected frequencies, ranging from 2 to 500 years, for all nontidal drainage basins in Maryland. The methods were developed by generalized least-squares regression techniques using data from 219 gaged basins in and near Maryland. The State is divided into five hydrologic regions: the Appalachian Plateaus and Allegheny Ridges region, the Blue Ridge and Great Valley region, the Piedmont region, the Western Coastal Plain region, and the Eastern Coastal Plain region. These regions correspond to the physiographic provinces of the State, with the exceptions that (1) the Coastal Plain Province is divided into two hydrologic regions, and (2) there is no distinct hydrologic region corresponding to the Valley and Ridge Province as it is divided into its constituent Allegheny Ridges and Great Valley subdivisions. Sets of equations for calculating peak discharges based on physical basin characteristics are provided for each of the regions. Based on the peak-flow equations, methods for estimating peak flows are presented for ungaged and gaged streams in Maryland. The methods and equations are supported by generalized least-squares analysis of basin and flood-frequency characteristics data from 219 drainage basins in and near Maryland. estimates for each of the five regions are calculated using combinations of the fol-lowing basin characteristics: drainage area, forest cover, basin relief, carbonate rock coverage, storage, and runoff-curve number. Drainage area contributes to the estimate in all five study regions. Carbonate rock coverage is used only in the Blue Ridge and Great Valley region. Storage and runoff-curve number are used solely in the Eastern Coastal Plain region. All other basin characteristics are used in two or more regions. Standard errors of estimate for the regression equations range from 19 to 31 percent in the Appalachian Plateaus and Allegheny Ridges region, 34 to 47 percent in the Blue Ridge and Great Valley region, 33 to 48 percent in the Piedmont region, 45 to 64 percent in the Western Coastal Plain region, and 36 to 42 percent in the Eastern Coastal Plain region.

Maryland↗
USGS2026

Interplay between tectonics and submarine mass transport deposits in Cortes Basin: New high-resolution geophysics in the Outer California Borderland

The Outer California Borderland (OCB) is an active transform plate boundary offshore Southern California, where the relationship between faulting and submarine mass transport deposits (MTDs) remains poorly understood. Onshore paleoseismic data provide high-resolution earthquake records, whereas marine geophysical data capture longer-term histories. Offshore fault systems pose hazards to infrastructure and dense coastal populations, particularly when linked to submarine landslides. We present new high-resolution geophysical data set (cruise SR2303), including bathymetric and CHIRP sub-bottom data integrated with legacy seismic reflection data and chronostratigraphic constraints from ODP Site 1012 to examine Quaternary MTD recurrence and tectonic controls in the Cortes Basin, OCB. Bathymetry shows deformational features, including slide scarps and previously unmapped fault segments with evidence of Holocene activity. CHIRP profiles reveal 10 stacked MTDs in the East Cortes Basin and 8 in the West Cortes Basin, spanning ∼752 ka with an average recurrence of ∼83.6 ± 1 ka. Acoustic imaging shows 7 MTD intervals coinciding with fault offset increments and fault growth suggesting earthquake-triggered mass wasting. A strong association between MTD occurrences and sea-level extremes also supports glacio-eustatic contribution to slope failure. Stratigraphic correlations suggest quasi-synchronous MTDs across the eastern and western areas, likely triggered by larger eathquakes in the Quaternary. Although the identified MTDs occur relatively far from the Southern California coast, they still pose a potential tsunamigenic hazard requiring further assessment. Moreover, if linked to earthquakes along major strike-slip faults, for example, the Ferrelo fault, the MTDs may provide valuable proxies to constrain rupture scenarios and fault connectivity within the understudied OCB.

California↗
USGS2025

Concentration-discharge relations and transient metal loads reveal spatiotemporal variability in solute-generation mechanisms in a mine-affected watershed

Concentration-discharge (CQ) relations are commonly used to understand geochemical and hydrologic controls on the generation of solutes in watersheds. Despite the widespread application of CQ relations, this technique has been infrequently applied to acid mine drainage (AMD) sites, but the CQ framework may allow mechanistic understanding of remedial outcomes such as impoundment of water within underground mines. Results of CQ analyses and changes in metal loads in an AMD affected watershed in Colorado, USA indicate that dissolved loads increased at many individual locations following water impoundment within mine workings. Although increased loads were observed at most individual locations, these increases were offset by a large decrease in loading from the largest mine. A loading analysis that included data from an instream monitoring location showed a statistically significant decrease in Fe and Zn after bulkhead emplacement, indicating a net positive effect of bulkheads. Streams generally displayed dilution CQ patterns whereas mines and springs showed either flushing or chemostatic patterns prior to bulkheading, which transitioned to chemostatic patterns following bulkheading, indicating a transition from dynamic to equilibrium geochemical processes. Saturation indices for sulfide and secondary minerals indicated that mines and springs were near equilibrium for phases including schwertmannite, fluorite, and gypsum. Saturation indices vary through time for mines suggesting progressive leaching of sulfide minerals as the mass of available minerals in the mine workings decreases. Together, these diverse analyses provide an integrated understanding of the variability in solute generating processes in this watershed and may inform remediation plans for similarly affected sites by indicating the nature of mineralogic controls on water quality.

Colorado↗