Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Sound Waves”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS1979

Modern biogenic gas-generated craters (sea-floor “pockmarks”) on the Bering Shelf, Alaska

As many as 1,340 small craters per square kilometre cover the sea floor of Norton Sound in the northeastern Bering Sea. The craters are circular pits, 1 to 10 m in diameter and less than 1 m deep, observed on sonographs over 20,000 km 2 of northern Norton Sound sea floor. Craters typically are associated with acoustic anomalies, near-surface peaty mud, and gas-charged sediment. The peaty mud is a thick (>1.5 m), nonmarine pre-Holocene deposit that is now covered by a 1- to 3-m-thick layer of Holocene marine mud in the area of the craters. The peaty mud (2% to 8% organic carbon) contains abundant biogenic methane [C 1 /(C 2 + C 3 ) = 256 to 7,669] with carbon isotope (δ 13 C) values of −69‰ to −75‰- Decomposition of organic debris in the peaty mud apparently charges the mud with gas. The peaty and gassy zones attenuate sound waves and cause acoustic anomalies on high-resolution seismic profiles in the area with craters. The craters are forming now, as shown by the disruption of modern ice gouges by the craters. In the absence of storms, the gas apparently is trapped in the peaty mud in a saturated state by the cover of Holocene mud. Periodically, possibly during storms, the gas escapes through the thin Holocene cover and forms craters.

Alaska↗
USGS2005

Acoustic doppler velocity monitoring within Main Spring, Barton Springs, Austin, Texas, April-September 2004-enhancing the accuracy of springflow data

Acoustic Doppler velocity (ADV) meters are sophisticated underwater monitoring instruments that use sound waves to measure water velocity in as many as three directions. In April 2004, an ADV meter was installed inside the principal orifice and discharge point of Main Spring at Barton Springs in Austin, Texas. This instrument collects velocity data that can be used to enhance the accuracy of springflow data and identify previously unrecognized hydrologic patterns. An accurate record of springflow at Barton Springs is important for several reasons. First, Barton Springs is the only known habitat for the Barton Springs salamander ( Eurycea sosorum ), a federally-listed endangered species that is dependent on reliable springflow to survive. Determination of sustainable Edwards aquifer yields compatible with the survival of the species is impossible without an accurate springflow record. Second, the 3-acre swimming pool fed by Barton Springs is enjoyed by about 340,000 people per year (2003) and is an important tourist attraction. Third, Barton Springs provides a part of Austin's municipal water supply; water from Barton Springs discharges into Town Lake on the Colorado River about 0.4 mile upstream from one of Austin's three water-supply plants. Fourth, flow in Barton Springs reflects water levels in the Barton Springs segment of the Edwards aquifer, which currently (2005) is designated a sole-source aquifer by the U.S. Environmental Protection Agency. This report, prepared by the U.S. Geological Survey, briefly summarizes the results of recent ADV-based velocity and springflow data acquisition at Barton Springs and describes an application of velocity monitoring to enhance the accuracy of springflow data.

Texas↗
USGS2014

Use of acoustic backscatter to estimate continuous suspended sediment and phosphorus concentrations in the Barton River, northern Vermont, 2010-2013

The U.S. Geological Survey, in cooperation with the Vermont Department of Environmental Conservation, investigated the use of acoustic backscatter to estimate concentrations of suspended sediment and total phosphorus at the Barton River near Coventry, Vermont. The hypothesis was that acoustic backscatter—the reflection of sound waves off objects back to the source from which they came—measured by an acoustic Doppler profiler (ADP) and recorded as ancillary data for the calculation of discharge, also could be used to generate a continuous concentration record of suspended sediment and phosphorus at the streamgage, thereby deriving added value from the instrument. Suspended-sediment and phosphorus concentrations are of particular interest in Vermont, where impairment of surface waters by suspended sediments and phosphorus is a major concern. Regression models for estimating suspended-sediment concentrations (SSCs) and total phosphorus concentrations evaluated several independent variables: measured backscatter (MB), water-corrected backscatter (WCB), sediment-corrected backscatter (SCB), discharge, fluid-absorption coefficient, sediment-driven acoustic attenuation coefficient, and discharge hysteresis. The best regression equations for estimating SSC used backscatter as the predictor, reflecting the direct relation between acoustic backscatter and SSC. Backscatter was a better predictor of SSC than discharge in part because hysteresis between SSC and backscatter was less than for SSC and discharge. All three backscatter variables—MB, WCB, and SCB—performed equally as predictors of SSC and phosphorus concentrations at the Barton River site. The similar abilities to predict SSC among backscatter terms may partially be attributed to the low values and narrow range of the sediment-driven acoustic attenuation in the Barton River. The regression based on SCB was selected for estimating SSC because it removes potential bias caused by attenuation and temperature fluctuations. The best regression model for estimating phosphorus concentrations included terms for discharge and discharge hysteresis. The finding that discharge hysteresis was a significant predictor of phosphorus concentrations might be related to preferential sorption of phosphorus to fine-grained sediments, which have been found to be particularly sensitive to hysteresis. Regression models designed to estimate phosphorus concentrations had less predictive power than the models for SSCs. Data from the Barton River did not fully support one of the study’s hypotheses—that backscatter is mostly caused by sands, and attenuation is mostly caused by fines. Sands, fines, and total SSCs in the Barton River all related better to backscatter than to sediment-driven acoustic attenuation. The weak relation between SSC and sediment-driven acoustic attenuation may be related to the low values and narrow range of SSCs and sediment attenuations observed at Barton River. A weak relation between SSC and sediment-driven acoustic attenuation also suggests that the diameters of the fine-sized suspended sediments in the Barton River may be predominantly greater than 20 micrometers (μm). Long-term changes in the particle-size distribution (PSD) were not observed in Barton River; however, some degree of within-storm changes in sediment source and possibly PSD were inferred from the hysteresis between SSC and SCB.

Vermont↗
USGS1982

The 1982 eruption of El Chichon volcano, southeastern Mexico

Late in the evening on March 28, El Chichon roared into life with a tremendous explosion that sent a column of ash and gases 10 miles high within an hour. There were no immediate warning signals of the eruption of El Chichon, although increased earthquake activity had been noted for months, possibly a few years, before the explosion. Sound waves from the explosion were detected by instruments 7000 miles away in Antarctica.

Earthquake Information Bulletin (USGS)↗
USGS2013

The music of earthquakes and Earthquake Quartet #1

Earthquake Quartet #1, my composition for voice, trombone, cello, and seismograms, is the intersection of listening to earthquakes as a seismologist and performing music as a trombonist. Along the way, I realized there is a close relationship between what I do as a scientist and what I do as a musician. A musician controls the source of the sound and the path it travels through their instrument in order to make sound waves that we hear as music. An earthquake is the source of waves that travel along a path through the earth until reaching us as shaking. It is almost as if the earth is a musician and people, including seismologists, are metaphorically listening and trying to understand what the music means.

Book chapter↗
USGS2007

Miscellaneous High-Resolution Seismic Imaging Investigations in Salt Lake and Utah Valleys for Earthquake Hazards

Introduction In support of earthquake hazards and ground motion studies by researchers at the Utah Geological Survey, University of Utah, Utah State University, Brigham Young University, and San Diego State University, the U.S. Geological Survey Geologic Hazards Team Intermountain West Project conducted three high-resolution seismic imaging investigations along the Wasatch Front between September 2003 and September 2005. These three investigations include: (1) a proof-of-concept P-wave minivib reflection imaging profile in south-central Salt Lake Valley, (2) a series of seven deep (as deep as 400 m) S-wave reflection/refraction soundings using an S-wave minivib in both Salt Lake and Utah Valleys, and (3) an S-wave (and P-wave) investigation to 30 m at four sites in Utah Valley and at two previously investigated S-wave (Vs) minivib sites. In addition, we present results from a previously unpublished downhole S-wave investigation conducted at four sites in Utah Valley. The locations for each of these investigations are shown in figure 1. Coordinates for the investigation sites are listed in Table 1. With the exception of the P-wave common mid-point (CMP) reflection profile, whose end points are listed, these coordinates are for the midpoint of each velocity sounding. Vs30 and Vs100, also shown in Table 1, are defined as the average shear-wave velocities to depths of 30 and 100 m, respectively, and details of their calculation can be found in Stephenson and others (2005). The information from these studies will be incorporated into components of the urban hazards maps along the Wasatch Front being developed by the U.S. Geological Survey, Utah Geological Survey, and numerous collaborating research institutions.

Open-File Report↗
USGS1990

Stability of giant sand waves in eastern Long Island Sound, U.S.A.

A combination of a highly accurate bathymetric surveying technique and in-situ submersible observations and measurements were used to assess the migrational trends and morphological changes of large sand waves ( Ht ≤ 17 m) in eastern Long Island Sound. Although residing in a high-energy tidal environment characterized by a net westward sediment flux, the large bedforms are relatively stable over the short term. Over a 7 month period, 55.1% of a total 2942 m of sand wave crestline lengths migrated less than the horizontal accuracy limits of navigation (2 m). Approximately 35% of the remaining sand wave crests migrated less than 4 m. Net migration of the sand wave crests in the study area was 0.2 m. In addition, the bulk form (center of area in profile view) or the base of the sand waves showed little, if any, movement. These data, in conjunction with flow data within the sand wave field, suggest that net migration rates are greater than the time span of this study and/or the sand waves move in response to large residual flows created by high-energy, aperiodic storm events. The latter scenerio suggests that day to day processes only serve to rework and modify the sand waves.

Marine Geology↗
USGS2008

Slowing of coastal subsidence is good news for restoration of Louisiana's wetlands

Every year, volunteers use thousands of discarded Christmas trees to build brush fences in the coastal waters of Louisiana. The fences slow down waves and trap sediment, allowing aquatic vegetation to take root in the still water and stimulating the growth of new marsh. This is one of many efforts to counteract wetland loss (the loss of saline, brackish, intermediate, and freshwater marshes) that has plagued coastal Louisiana since the mid-20th century. U.S. Geological Survey (USGS) scientists recently announced good news for Louisiana's coastal-restoration projects: using a combination of historical and recently released data, they discovered that subsidence of coastal land in the Mississippi River delta plain appears to have slowed considerably since the 1990s. This discovery means that new marshlands created by the Christmas tree program and other restoration projects may persist—that is, stay above sea level—longer than previously thought.

Louisiana↗
USGS2013

Lidar-revised geologic map of the Olalla 7.5' quadrangle, King, Kitsap, and Pierce Counties, Washington

The Olalla 7.5' quadrangle, which lies almost in the center of the Puget Lowland, displays the broad range of geologic environments typical of the region. The upland plain is fluted by the passage of the great continental ice sheet that last covered the area about 17,000 (14,000 radiocarbon) years ago. The plain is cut by channel deposits, both late glacial and postglacial in age, and it is cleaved even more deeply by one of the major arms of Puget Sound, Colvos Passage, which here separates the west coast of Vashon Island from the Kitsap Peninsula. Beneath the deposits of the last ice sheet is a complex sequence of older Quaternary-age sediments that extends about 400 m below the modern ground surface. These older sediments are best exposed along the shorelines and beach cliffs of Puget Sound, where wave action and landslides maintain relatively fresh exposures. The older sediments typically are compact, having been loaded by ice during one or more episodes of glaciation subsequent to their deposition. Locally these sediments are also cemented by iron and manganese oxides and hydroxides, a consequence of many tens or hundreds of thousands of years of weathering and groundwater movement. Our map is an interpretation of a 6-ft resolution lidar-derived digital elevation model combined with the geology depicted on the "Geologic map of the Olalla 7.5' quadrangle, King, Kitsap, and Pierce Counties, Washington," by Booth and Troost (2005), which was described, interpreted, and located on the 1953 1:24,000-scale topographic map of the Olalla 7.5-minute quadrangle. The original topographic base map, derived from 1951 aerial photographs, has 20-ft contours, nominal horizontal resolution of circa 40 ft (12 m), and nominal mean vertical accuracy of circa 13 ft (4 m). This new DEM has a horizontal resolution of 6 ft (2 m) and mean vertical accuracy circa 1 ft (0.3 m). The greater resolution and accuracy of the lidar DEM facilitated a much-improved interpretation of many aspects of the surficial geology, especially the distribution and relative age of landforms and the materials inferred to comprise them.

Washington↗
USGS2015

Getting out of harm's way - evacuation from tsunamis

Scientists at the U.S. Geological Survey (USGS) have developed a new mapping tool, the Pedestrian Evacuation Analyst , for use by researchers and emergency managers to estimate how long it would take for someone to travel on foot out of a tsunami-hazard zone. The ArcGIS software extension, released in September 2014, allows the user to create maps showing travel times out of hazard zones and to determine the number of people that may or may not have enough time to evacuate. The maps take into account the elevation changes and the different types of land cover that a person would encounter along the way. Maps of travel time can be used by emergency managers and community planners to identify where to focus evacuation training and tsunami education. The tool can also be used to examine the potential benefits of vertical-evacuation structures, which are buildings or berms designed to provide a local high ground in low-lying areas of the hazard zone.

Sound Waves: Coastal science and research news fro↗
USGS2005

USGS scientists study sediment deposited by 2004 Indian Ocean tsunami

In January, U.S. Geological Survey (USGS) scientists traveled to countries on the Indian Ocean to study sediment deposited by the devastating tsunami of December 26, 2004. They hope to gain knowledge that will help them to identify ancient tsunami deposits in the geologic record—which extends much farther into the past than written records—and so compile a history of tsunamis that can be used to assess a region's future tsunami risk.

Sound Waves: Coastal science and research news fro↗
USGS2014

Character, distribution, and ecological significance of storm wave-induced scour in Rhode Island Sound, USA

Multibeam bathymetry, collected during NOAA hydrographic surveys in 2008 and 2009, is coupled with USGS data from sampling and photographic stations to map the seabed morphology and composition of Rhode Island Sound along the US Atlantic coast, and to provide information on sediment transport and benthic habitats. Patchworks of scour depressions cover large areas on seaward-facing slopes and bathymetric highs in the sound. These depressions average 0.5-0.8 m deep and occur in water depths reaching as much as 42 m. They have relatively steep well-defined sides and coarser-grained floors, and vary strongly in shape, size, and configuration. Some individual scour depressions have apparently expanded to combine with adjacent depressions, forming larger eroded areas that commonly contain outliers of the original seafloor sediments. Where cobbles and scattered boulders are present on the depression floors, the muddy Holocene sands have been completely removed and the winnowed relict Pleistocene deposits exposed. Low tidal-current velocities and the lack of obstacle marks suggest that bidirectional tidal currents alone are not capable of forming these features. These depressions are formed and maintained under high-energy shelf conditions owing to repetitive cyclic loading imposed by high-amplitude, long-period, storm-driven waves that reduce the effective shear strength of the sediment, cause resuspension, and expose the suspended sediments to erosion by wind-driven and tidal currents. Because epifauna dominate on gravel floors of the depressions and infauna are prevalent in the finer-grained Holocene deposits, it is concluded that the resultant close juxtaposition of silty sand-, sand-, and gravel-dependent communities promotes regional faunal complexity. These findings expand on earlier interpretations, documenting how storm wave-induced scour produces sorted bedforms that control much of the benthic geologic and biologic diversity in Rhode Island Sound.

Rhode Island↗
USGS2010

On possible plume-guided seismic waves

Hypothetical thermal plumes in the Earth's mantle are expected to have low seismic-wave speeds and thus would support the propagation of guided elastic waves analogous to fault-zone guided seismic waves, fiber-optic waves, and acoustic waves in the oceanic SOund Fixing And Ranging channel. Plume-guided waves would be insensitive to geometric complexities in the wave guide, and their dispersion would make them distinctive on seismograms and would provide information about wave-guide structure that would complement seismic tomography. Detecting such waves would constitute strong evidence of a new kind for the existence of plumes. A cylindrical channel embedded in an infinite medium supports two classes of axially symmetric elastic-wave modes, torsional and longitudinal-radial. Torsional modes have rectilinear particle motion tangent to the cylinder surface. Longitudinal-radial modes have elliptical particle motion in planes that include the cylinder axis, with retrograde motion near the axis. The direction of elliptical particle motion reverses with distance from the axis: once for the fundamental mode, twice for the first overtone, and so on. Each mode exists only above its cut-off frequency, where the phase and group speeds equal the shear-wave speed in the infinite medium. At high frequencies, both speeds approach the shear-wave speed in the channel. All modes have minima in their group speeds, which produce Airy phases on seismograms. For shear wave-speed contrasts of a few percent, thought to be realistic for thermal plumes in the Earth, the largest signals are inversely dispersed and have dominant frequencies of about 0.1-1 Hz and durations of 15-30 sec. There are at least two possible sources of observable plume waves: (1) the intersection of mantle plumes with high-amplitude core-phase caustics in the deep mantle; and (2) ScS-like reflection at the core-mantle boundary of downward-propagating guided waves. The widespread recent deployment of broadband seismometers makes searching for these waves possible.

Bulletin of the Seismological Society of America↗