Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Shock Waves”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

Constitutive relations associated with the Mott-Smith distribution function

It is shown that the distribution function assumed by Mott-Smith determines a unique relation between heat flux, stress, and fluid velocity given by q = (3/2) τ u, i.e., it provides a constitutive relation for heat flux, and it also determines a simple expression for this ratio of third-order central moments Q = (C 3 x) / C x C 2 . These expressions allow the equation of transfer for c x2 to be cast in a form that yields a nonlinear constitutive relation for stress. The results obtained from the Mott-Smith ansatz are compared with the theory of Baganoff and Nathenson and results from a numerical solution of the Boltzmann equation for shock-wave structure obtained by Hicks and Yen.

Physics of Fluids↗

Burst conditions of explosive volcanic eruptions recorded on microbarographs

Explosive volcanic eruptions generate pressure disturbances in the atmosphere that propagate away either as acoustic or as shock waves, depending on the explosivity of the eruption. Both types of waves are recorded on microbarographs as 1- to 0.1-hertz N-shaped signals followed by a longer period coda. These waveforms can be used to estimate burst pressures end gas concentrations in explosive volcanic eruptions and provide estimates of eruption magnitudes.

Science↗

Chemical characteristics of oceanic basalts and the upper mantle

Tholeiitic basalts ( oceanic tholeiites) that form most of the deeply submerged volcanic features in the oceans are characterized by extremely low amounts of Ba, K, P, Pb, Sr, Th, U, and Zr as well as Fe 2 O 3 /FeO < 0.2 and Na/K > 10 in unaltered samples. Oceanic tholeiites also have rare earth abundance-distribution patterns and ratios of K/Rb (1300) and Sr 87 /Sr 86 (0.702) similar to or overlapping those of calcium-rich (basaltic) achondritic meteorites. The close compositional similarities between the oceanic tholeiites and calcium-rich achondrites indicates the relatively primitive nature of the oceanic tholeiites. In contrast, the alkali-rich basalts that cap submarine and island volcanoes are relatively enriched in Ba, K, La, Nb, P, Pb, Pb 206 , Rb, Fe 2 O 3 , Sr, Sr 87 , Ti, Th, U, and Zr; i.e. in the same elements and isotopes that are concentrated in the sialic continental crusts by factors of 5 to 1000 more than the amounts readily inferred in the upper mantle . These analytical data coupled with the field relationships indicate that the alkali-rich basalts are derivative rocks, fractionated from the oceanic tholeiites by processes of magmatic differentiation, and that the oceanic tholeiites are the principal or only primary magma generated in the upper mantle under the oceans. Studies of the abundances and compositions of continental basalts show that essentially identical tholeiitic lavas, contaminated with Si, K, and the chemically coherent trace elements and radiogenic isotopes from the sial, also have been the predominant or only magma generated in the mantle under the continents. The chemical properties of oceanic tholeiites suggest that the upper mantle probably contains less than (in parts per million): Ba, 10; K, 1000; Pb, 0.4; Rb, 10; Th, 0.2; and U, 0.1. The Sr 87 /Sr 86 must be less than 0.7015; Th/U about 2; K/Rb about 1500-2000; and Fe 2 O 3 /FeO less than 0.1. The integration of field and petrochemical data with seismic, density, and shock-wave studies suggests that the oceanic tholeiites are either complete melts of the upper mantle or are generated from a mix of this tholeiite and a magnesium-rich peridotite or dunite in proportions up to perhaps 1:4. The Mohorovičić discontinuity under the oceans appears to mark the transition downward from a largely tholeiitic oceanic crust to either tholeiite reconstituted to blueschist or greenschist or to the ultramafic residue left after expulsion of oceanic tholeiite.

Geological Society of America Bulletin↗

A comprehensive survey of faults, breccias, and fractures in and flanking the eastern Española Basin, Rio Grande rift, New Mexico

A comprehensive survey of geologic structures formed in the Earth’s brittle regime in the eastern Española Basin and flank of the Rio Grande rift, New Mexico, reveals a complex and protracted record of multiple tectonic events. Data and analyses from this representative rift flank-basin pair include measurements from 53 individual fault zones and 22 other brittle structures, such as breccia zones, joints, and veins, investigated at a total of just over 100 sites. Structures were examined and compared in poorly lithified Tertiary sediments, as well as in Paleozoic sedimentary and Proterozoic crystalline rocks. Data and analyses include geologic maps; field observations and measurements; orientation, kinematic, and paleostress analyses; statistical examination of fault trace lengths derived from aeromagnetic data; mineralogy and chemistry of host and fault rocks; and investigation of fault versus bolide-impact hypotheses for the origin of enigmatic breccias found in the Proterozoic basement rocks. Fault kinematic and paleostress analyses suggest a record of transitional, and perhaps partitioned, strains from the Laramide orogeny through Rio Grande rifting. Normal faults within Tertiary basin-fill sediments are consistent with more typical WNW-ESE Rio Grande rift extension, perhaps decoupled from bedrock structures due to strength contrasts favoring the formation of new faults in the relatively weak sediments. Analyses of the fault-length data indicate power-law length distributions similar to those reported from many geologic settings globally. Mineralogy and chemistry in Proterozoic fault-related rocks reveal geochemical changes tied to hydrothermal alteration and nearly isochemical transformation of feldspars to clay minerals. In sediments, faulted minerals are characterized by mechanical entrainment with minor secondary chemical changes. Enigmatic breccias in rift-flanking Proterozoic rocks are autoclastic and isochemical with respect to their protoliths and exist near shatter cones believed to be related to a previously reported pre-Pennsylvanian impact event. A weak iridium anomaly is associated with the breccias as well as adjacent protoliths, thus an impact shock wave cannot be ruled out for their origin. Major fault zones along the eastern rift-flank mountain front are discontinuous and unlikely to impede regional groundwater flow into Española Basin aquifers. The breccia bodies are not large enough to constitute aquifers, and no fault- or breccia-related geochemical anomalies were identified as potential contamination sources for ground or surface waters. The results of this work provide a broad picture of structural diversity and tectonic evolution along the eastern flank of the central Rio Grande rift and the adjacent Española Basin representative of the rift as a whole and many rifts worldwide.

New Mexico↗

Impact mechanics at Meteor Crater, Arizona

Meteor Crator is a bowl-shaped depression encompassed by a rim composed chiefly of debris stacked in layers of different composition. Original bedrock stratigraphy is preserved, inverted, in the debris. The debris rests on older disturbed strata, which are turned up at moderate to steep angles in the wall of the crater and are locally overturned near the contact with the debris. These features of Meteor Crater correspond closely to those of a crater produced by nuclear explosion where depth of burial of the device was about 1/5 the diameter of the resultant crater. Studies of craters formed by detonation of nuclear devices show that structures of the crater rims are sensitive to the depth of explosion scaled to the yield of the device. The structure of Meteor Crater is such as would be produced by a very strong shock originating about at the level of the present crater floor, 400 feet below the original surface. At supersonic to hypersonic velocity an impacting meteorite penetrates the ground by a complex mechanism that includes compression of the target rocks and the meteorite by shock as well as hydrodynamic flow of the compressed material under high pressure and temperature. The depth of penetration of the meteorite, before it loses its integrity as a single body, is a function primarily of the velocity and shape of the meteorite and the densities and equations of state of the meteorite and target. The intensely compressed material then becomes dispersed in a large volume of breccia formed in the expanding shock wave. An impact velocity of about 15 km/sec is consonant with the geology of Meteor Crater in light of the experimental equation of state of iron and inferred compressibility of the target rocks. The kinetic energy of the meteorite is estimated by scaling to have been from 1.4 to 1.7 megatons TNT equivalent.

Open-File Report↗

Summary of seismic activity and its relation to geology and mining in the Sunnyside mining district, Carbon and Emery Counties, Utah, during 1967-1970

In the Sunnyside mining district, Utah, coal is mined under thick and variable overburden which is locally weakened by faults and other structural discontinuities. Stress changes and local stress concentrations produced by mining under these conditions often cause sudden and violent ruptures in the coal and surrounding rock mass. The strain energy released by this type of failure, which can produce shock waves and may discharge coal and rock with explosive force, is often a serious threat to life and property. These releases of strain energy are called bumps or bounces by miners if they occur in the coal, and rock bursts if they occur in the surrounding rock mass. Many of these releases are so violent that they generate seismic waves that can be felt, or at least detected by seismic instruments, miles from the site of the rupture, whereas others are smaller and can be detected only by those sensitive seismic instruments within a few thousand feet of the site of the rupture. In 1969 and 1970, about 27,000 and about 15,000 earth tremors, respectively, were recorded by the five-station seismic monitoring network that is located at the surface and encompasses most of the mine workings in the district. Of these totals, 512 and 524 earth tremors, respectively, were of sufficient magnitude (greater than 1. 5 on the Richter scale) so that the hypocenters could be accurately located. In 1968 about 20,000 tremors were recorded, with 281 large enough to plot, but in 1967 over 50,000 were recorded, of which 540 were plotted. In this report we discuss the way in which seismic activity, geology, and mining are related or seem to be related for the period 1967 through 1970, with emphasis on the period 1969-70. We also suggest certain mining procedures which, based on studies during the period, might increase the safety and efficiency of mining operations in the Sunnyside district. A complete tabulation of the larger magnitude earth tremors which occurred during 1969-70 and descriptions of how they relate to mining are given in the appendix. Similar tabulations and descriptions for 1967 and 1968 are available in earlier reports (Barnes and others, 1969; Dunrud and others, 1970).

Open-File Report↗

Monitoring marine eruptions

Introduction Submarine volcanoes produce much of the same seismicity and eruptive activity as subaerial volcanoes and can pose hazards to society. Although they can be monitored with similar techniques and methods as described in other chapters of this volume, their submerged location brings unique challenges. This chapter addresses these challenges and provides recommendations for monitoring volcanoes fully or partly in marine environments to meet the capabilities described in other chapters of this volume. The United States and its territories host dozens of submarine volcanoes with most (around 60) in the Commonwealth of the Northern Mariana Islands. Approximately 20 of the Northern Mariana Islands submarine volcanoes are known to be hydrothermally active, and 10 have confirmed eruptions since the 1950s (for example, Baker and others, 2008; Tepp and others, 2019a). Nine of those volcanoes were considered by the National Volcanic Threat Assessment (Ewert and others, 2018) to have a combination of eruptive type and summit depth that poses a higher risk of hazardous eruptions, although only one was listed as a moderate (level 3) threat. Other notable submarine volcanoes of interest to the United States that have historically erupted are Axial Seamount off the Washington State coast, Kamaʻehuakanaloa in Hawaiʻi, and Vailuluʻu seamount in American Samoa. All of these, however, have a low risk of hazards because of their depth (greater than 600 meters below sea level) and eruptive type and so are not included in the National Volcanic Threat Assessment. In addition to submarine volcanoes, the submerged flanks of island volcanoes can also be a source of hazardous submarine eruptions—for example, the 1877 eruption of Mauna Loa, Hawai‘i, in Kealakekua Bay (Wanless and others, 2006). The most notable submarine eruption in recent times was the 2022 eruption of Hunga Tonga–Hunga Haʻapai in Tonga, which was one of the largest eruptions on Earth in the past 100 years. It created a massive volcanic plume, unprecedented shock waves, and far-reaching tsunami (Lynett and others, 2022). Other recent submarine eruptions in the Pacific Ocean Basin have produced subaerial plumes that reached aircraft heights (Carey and others, 2014) and large pumice rafts that can affect marine traffic and harbors (for example, Jutzeler and others, 2014; Kornei, 2019). These examples illustrate the potential hazards of major submarine eruptions. Yet, submarine volcanoes are largely unmonitored, and many eruptions occur that are unnoticed or only identified hours or days afterward. Within U.S. territory, submarine volcanoes in the Northern Mariana Islands have been known to produce eruptive activity that can affect society. Reports from fishermen and other marine vessels in the Northern Mariana Islands have noted underwater explosions, sea-surface discoloration, and bubbling water, all of which are known to be signs of submarine volcanic activity. South Sarigan seamount, located about 160 kilometers (km) north of Saipan, erupted in 2010 from greater than 150 meters below the sea surface, resulting in a gas and ash plume that reached more than 11.9 km into the atmosphere (for example, Searcy, 2013; Embley and others, 2014), high enough to affect international air traffic. Precursory and co-eruptive seismicity was detected on the regional Northern Mariana Islands seismic network (Searcy, 2013) and on global monitoring instruments (Green and others, 2013). Monitoring of submarine volcanoes is best accomplished with marine-based instrumentation, which is also useful for monitoring small island volcanoes that may not have the land area necessary for comprehensive subaerial monitoring. The primary marine-based instrumentation used for submarine volcanoes includes ocean-bottom pressure sensors to assess sea-floor deformation, ocean-bottom seismometers (OBSs) to detect seismicity, and both moored and ocean-bottom hydrophones to detect submarine explosions. Other sensors offer important monitoring data, such as turbidity, temperature, and chemistry of hydrothermal emissions. Marine-based instruments are typically deployed in campaign-style networks with no real-time telemetry owing to cost considerations and technical limitations. However, when necessary, marine instruments can be operated in real time using cables to transmit data to land-based facilities; other technologies for this purpose are in use or in development, such as acoustic transmission from the instrument to a moored buoy (Matsumoto and others, 2016) and a winch-based system with a satellite antenna that is part of the instrument mooring (Matsumoto and others, 2019). Emerging technologies for marine-based monitoring may be considered as part of a future monitoring plan. These technologies include ocean gliders and floats with on-board hydrophones that have been used to record earthquakes and submarine eruptions (for example, Matsumoto and others, 2013; Sukhovich and others, 2015) and fiber-optic cables that have been used as strainmeters to detect earthquakes (for example, Marra and others, 2018; Lindsey and others, 2019). Land-based instruments and satellites can also provide some capability for monitoring submarine volcanoes, but they provide more limited observations than marine-based instrumentation.

Scientific Investigations Report↗

Alamo megabreccia: Record of a late devonian impact in southern Nevada

The Alamo breccia is probably the most voluminous known outcropping carbonate megabreccia. It occupies ~4000 km2 across 11 mountain ranges in southern Nevada, has an average thickness of ~70 m, and contains a volume of 250+ km3. The breccia is a single bed, of early Frasnian (early Late Devonian) age, that formed in the wake of a giant slide that deposited a lower chaotic debrite, containing clasts as large as 80 × 500 m, and an upper exquisitely graded turbidite. It is anomalously intercalated with cyclic shallow-water platform carbonates of the Guilmette Formation. The Alamo breccia is interpreted as a product of the Alamo event, a nearby marine impact of an extraterrestrial object, whereby impact-generated crustal shock waves and/or marine superwaves detached the upper ~60 m of platform along a horizontal surface. Loosened bedrock slid seaward across the platform, and some of it accumulated as the lower debrite. Rock-water exchange induced landward-propagated tsunami(s), whose uprush and/or backwash deposited the upper turbidite, partly above sea level. Evidence for impact includes shockedquartz grains, an iridium anomaly, and reworked conodonts, all found only within the breccia. Because the Alamo breccia is not known outside of Nevada, and because the early Frasnian time of the Alamo event is not noted for accelerated extinctions, being ~3 m.y. before the Frasnian-Famennian impact(s) and biotic crisis, the impact was probably only of moderate size.

Nevada↗

Blast dynamics at Mount St Helens on 18 May 1980

At 8.32 a.m. on 18 May 1980, failure of the upper part of the north slope of Mount St Helens triggered a lateral eruption ('the blast') that devastated the conifer forests in a sector covering ???500 km2 north of the volcano. I present here a steady flow model for the blast dynamics and propose that through much of the devastated area the blast was a supersonic flow of a complex multiphase (solid, liquid, vapour) mixture. The shape of the blast zone; pressure, temperature, velocity (Mach number) and density distributions within the flow; positions of weak and strong internal shocks; and mass flux, energy flux, and total energy are calculated. The shape of blast zone was determined by the initial areal expansion from the reservoir, by internal expansion and compression waves (including shocks), and by the density of the expanding mixture. The pressure within the flow dropped rapidly away from the source of the blast until, at a distance of ???11 km, the flow became underpressured relative to the surrounding atmosphere. Weak shocks within the flow subparallel to the east and west margins coalesced at about this distance into a strong Mach disk shock, across which the flow velocities would have dropped from supersonic to subsonic as the pressure rose back towards ambient. The positions of the shocks may be reflected in differences in the patterns of felled trees. At the limits of the devastated area, the temperature had dropped only 20% from the reservoir temperature because the entrained solids thermally buffered the flow (the dynamic and thermodynamic effects of the admixture of the surrounding atmosphere and the uprooted forest and soils into the flow are not considered). The density of the flow decreased with distance until, at the limits of the blast zone, 20-25 km from the volcano, the density became comparable with that of the surrounding (dirty) atmosphere and the flow became buoyant and ramped up into the atmosphere. According to the model, the mass flux per unit area at the source was 0.6 ?? 104 g s-1 cm-2 and the energy flux per unit area was 2.5 MW cm-2. From the measured total ejected mass, 0.25 ?? 1015 g, the total energy released during the eruption was 1024 erg or 24 megatons. The model, triggering of the eruption and the transition from unsteady to steady flow, and applications to eyewitness observations and atmospheric effects are discussed in ref. 1. ?? 1981 Nature Publishing Group.

Nature↗

Source inversion of the 1988 Upland, California, earthquake: Determination of a fault plane for a small event

We examined short-period P waves to investigate if waveform data could be used to determine which of two nodal planes was the actual fault plane for a small (ML 4.6) earthquake near Upland, California. We removed path and site complications by choosing a small aftershock (ML 2.7) as an empirical Green function. The main shock P waves were deconvolved by using the empirical Green function to produce simple far-field displacement pulses. We used a least-squares method to invert these pulses for the slip distribution on a finite fault. Both nodal planes (strike 125°, dip 85° and strike 221°, dip 40°) of the first-motion focal mechanism were tested at various rupture velocities. The southwest trending fault plane consistently gave better fitting solutions than the southeast-trending plane. We determined a moment of 4.2 × 1022 dyne-cm. The rupture velocity, and thus the source area could not be well resolved, but if we assume a reasonable rupture velocity of 0.87 times the shear wave velocity, we obtain a source area of 0.97 km2 and a stress drop of 38 bars. Choice of a southwest-trending fault plane is consistent with the trend of the nearby portion of the Transverse Ranges frontal fault zone and indicates left-lateral motion. This method provides a way to determine the fault plane for small earthquakes that have no surface rupture and no obvious trend in aftershock locations.

California↗

Isolated cases of remote dynamic triggering in Canada detected using cataloged earthquakes combined with a matched-filter approach

Here we search for dynamically triggered earthquakes in Canada following global main shocks between 2004 and 2014 with M S &thinsp;>&thinsp;6, depth&thinsp;<&thinsp;100&thinsp;km, and estimated peak ground velocity&thinsp;>&thinsp;0.2&thinsp;cm/s. We use the Natural Resources Canada (NRCan) earthquake catalog to calculate &beta; statistical values in 1&deg;&thinsp;&times;&thinsp;1&deg; bins in 10&thinsp;day windows before and after the main shocks. The statistical analysis suggests that triggering may occur near Vancouver Island, along the border of the Yukon and Northwest Territories, in western Alberta, western Ontario, and the Charlevoix seismic zone. We also search for triggering in Alberta where denser seismic station coverage renders regional earthquake catalogs with lower completeness thresholds. We find remote triggering in Alberta associated with three main shocks using a matched-filter approach on continuous waveform data. The increased number of local earthquakes following the passage of main shock surface waves suggests local faults may be in a critically stressed state.

Alberta↗

Laboratory studies of volcanic jets

The study of the fluid dynamics of violent volcanic eruptions by laboratory experiment is described, and the important fluid-dynamic processes that can be examined in laboratory models are discussed in detail. In preliminary experiments, pure gases are erupted from small reservoirs. The gases used are Freon 12 and Freon 22, two gases of high molecular weight and high density that are good analogs of heavy and particulate-laden volcanic gases; nitrogen, a moderate molecular weight, moderate density gas for which the thermodynamic properties are well known; and helium, a low molecular weight, lowdensity gas that is used as a basis for comparison with the behavior of the heavier gases and as an analog of steam, the gas that dominates many volcanic eruptions. Transient jets erupt from the reservoir into the laboratory upon rupture of a thin diaphragm at the exit of a convergent nozzle. The gas accelerates from rest in the reservoir to high velocity in the jet. Reservoir pressures and geometries are such that the fluid velocity in the jets is initially supersonic and later decays to subsonic. The measured reservoir pressure decreases as the fluid expands through repetitively reflecting rarefaction waves, but for the conditions of these experiments, a simple steady-discharge model is sufficient to explain the pressure decay and to predict the duration of the flow. Density variations in the flow field have been visualized with schlieren and shadowgraph photography. The observed structure of the jet is correlated with the measured pressure history. The starting vortex generated when the diaphragm ruptures becomes the head of the jet. Though the exit velocity is sonic, the flow head in the helium jet decelerates to about one-third of sonic velocity in the first few nozzle diameters, the nitrogen head decelerates to about three-fourths of sonic velocity, while Freon maintains nearly sonic velocity. The impulsive acceleration of reservoir fluid into the surrounding atmosphere produces a compression wave. The strength of this wave depends primarily on the sound speed of the fluid in the reservoir but also, secondarily with opposite effect, on the density: helium produces a relatively strong atmospheric shock while the Freons do not produce any optically observable wave front. Well-formed N waves are detected with a microphone far from the reservoir. Barrel shocks, Mach disks, and other familiar features of steady underexpanded supersonic jets form inside the jet almost immediately after passage of the flow head. These features are maintained until the pressure in the reservoir decays to sonic conditions. At low pressures the jets are relatively structureless. Gas-particle jets from volcanic eruptions may behave as pseudogases if particle concentrations and mass and momentum exchange between the components are sufficiently small. The sound speed of volcanic pseudogases can be as large as 1000 m s −1 or as small as a few tens of meters per second depending on the mass loading and initial temperature. Fluids of high sound speed produce stronger atmospheric shock waves than do those of low sound speed. Therefore eruption of a hot gas lightly laden with particulates should produce a stronger shock than eruption of a cooler or heavily laden fluid. An empirical expression suggests that the initial velocity of the head of supersonic volcanic jets is controlled by the sound speed and the ratio of the density of the erupting fluid to that of the atmosphere. The duration of gas or pseudogas eruptions is controlled by the sound speed of the fluid and the ratio of reservoir volume to vent area.

Journal of Geophysical Research Solid Earth↗

Triggering of tsunamigenic aftershocks from large strike‐slip earthquakes: Analysis of the November 2000 New Ireland earthquake sequence

[1] The November 2000 New Ireland earthquake sequence started with a M w = 8.0 left‐lateral main shock on 16 November and was followed by a series of aftershocks with primarily thrust mechanisms. The earthquake sequence was associated with a locally damaging tsunami on the islands of New Ireland and nearby New Britain, Bougainville, and Buka. Results from numerical tsunami‐propagation models of the main shock and two of the largest thrust aftershocks ( M w > 7.0) indicate that the largest tsunami was caused by an aftershock located near the southeastern termination of the main shock, off the southern tip of New Ireland (Aftershock 1). Numerical modeling and tide gauge records at regional and far‐field distances indicate that the main shock also generated tsunami waves. Large horizontal displacements associated with the main shock in regions of steep bathymetry accentuated tsunami generation for this event. Most of the damage on Bougainville and Buka Islands was caused by focusing and amplification of tsunami energy from a ridge wave between the source region and these islands. Modeling of changes in the Coulomb failure stress field caused by the main shock indicate that Aftershock 1 was likely triggered by static stress changes, provided the fault was on or synthetic to the New Britain interplate thrust as specified by the Harvard CMT mechanism. For other possible focal mechanisms of Aftershock 1 and the regional occurrence of thrust aftershocks in general, evidence for static stress change triggering is not as clear. Other triggering mechanisms such as changes in dynamic stress may also have been important. The 2000 New Ireland earthquake sequence provides evidence that tsunamis caused by thrust aftershocks can be triggered by large strike‐slip earthquakes. Similar tectonic regimes that include offshore accommodation structures near large strike‐slip faults are found in southern California, the Sea of Marmara, Turkey, along the Queen Charlotte fault in British Columbia, and near the Alpine fault of New Zealand. Results from this study and previous stress modeling studies suggest that the likelihood of local tsunamis in these regions may significantly increase after a great strike‐slip earthquake.

New Britain, New Ireland↗

Direct test of static stress versus dynamic stress triggering of aftershocks

Aftershocks observed over time scales of minutes to months following a main shock are plausibly triggered by the static stress change imparted by the main shock, dynamic shaking effects associated with passage of seismic waves from the main shock, or a combination of the two. We design a direct test of static versus dynamic triggering of aftershocks by comparing the near-field temporal aftershock patterns generated by aseismic and impulsive events occurring in the same source area. The San Juan Bautista, California, area is ideally suited for this purpose because several events of both types of M???5 have occurred since 1974. We find that aftershock rates observed after impulsive events are much higher than those observed after aseismic events, and this pattern persists for several weeks after the event. This suggests that, at least in the near field, dynamic triggering is the dominant cause of aftershocks, and that it generates both immediate and delayed aftershock activity.

Geophysical Research Letters↗

Mysterious tsunami in the Caribbean Sea following the 2010 Haiti earthquake possibly generated by dynamically triggered early aftershocks

Dynamically triggered offshore aftershocks, caused by passing seismic waves from main shocks located on land, are currently not considered in tsunami warnings. The M7.0 2010 Haiti earthquake epicenter was located on land 27 km north of the Caribbean Sea and its focal mechanism was oblique strike-slip. Nevertheless, a tsunami recorded on a Caribbean Deep-Ocean Assessment and Reporting of Tsunami (DART) buoy and a tide gauge produced runup heights of 1–3 m along Haiti southeast coast. Earthquake finite-fault model inversions of the DART waveform suggest that a reverse fault doublet with magnitudes of M6.8 and M6.5 located 85 km southwest of the epicenter may have excited the tsunami. This doublet collocates with dynamically triggered aftershocks, derived from back-projection analysis, that occurred 20-60 s after the main shock of the Haiti earthquake. The aftershocks are within a region of maximum dynamic strain predicted by the main shock, on a possibly tectonically active submarine ridge southwest of Haiti's Southern Peninsula. The agreement between the tsunami finite-fault source models and the seismic and tectonic evidence suggests that earthquakes on land, even strike-slip faults, can generate tsunamis by dynamically triggering offshore aftershocks.

Earth and Planetary Science Letters↗

Impact craters on Venus: Initial analysis from Magellan

Magellan radar images of 15 percent of the planet show 135 craters of probable impact origin. Craters more than 15 km across tend to contain central peaks, multiple central peaks, and peak rings. Many craters smaller than 15 km exhibit multiple floors or appear in clusters; these phenomena are attributed to atmospheric breakup of incoming meteoroids. Additionally, the atmosphere appears to have prevented the formation of primary impact craters smaller than about 3 km and produced a deficiency in the number of craters smaller than about 25 km across. Ejecta is found at greater distances than that predicted by simple ballistic emplacement, and the distal ends of some ejecta deposits are lobate. These characteristics may represent surface flows of material initially entrained in the atmosphere. Many craters are surrounded by zones of low radar albedo whose origin may have been deformation of the surface by the shock or pressure wave associated with the incoming meteoroid. Craters are absent from several large areas such as a 5 million square kilometer region around Sappho Patera, where the most likely explanation for the dearth of craters is volcanic resurfacing. There is apparently a spectrum of surface ages on Venus ranging approximately from 0 to 800 million years, and therefore Venus must be a geologically active planet.

Science↗

New constraints on mechanisms of remotely triggered seismicity at Long Valley Caldera

Regional-scale triggering of local earthquakes in the crust by seismic waves from distant main shocks has now been robustly documented for over a decade. Some of the most thoroughly recorded examples of repeated triggering of a single site from multiple, large earthquakes are measured in geothermal fields of the western United States like Long Valley Caldera. As one of the few natural cases where the causality of an earthquake sequence is apparent, triggering provides fundamental constraints on the failure processes in earthquakes. We show here that the observed triggering by seismic waves is inconsistent with any mechanism that depends on cumulative shaking as measured by integrated energy density. We also present evidence for a frequency-dependent triggering threshold. On the basis of the seismic records of 12 regional and teleseismic events recorded at Long Valley Caldera, long-period waves (>30 s) are more effective at generating local seismicity than short-period waves of comparable amplitude. If the properties of the system are stationary over time, the failure threshold for long-period waves is ~0.05 cm/s vertical shaking. Assuming a phase velocity of 3.5 km/s and an elastic modulus of 3.5 x 10 10 Pa, the threshold in terms of stress is 5 kPa. The frequency dependence is due in part to the attenuation of the surface waves with depth. Fluid flow through a porous medium can produce the rest of the observed frequency dependence of the threshold. If the threshold is not stationary with time, pore pressures that are >99.5% of lithostatic and vary over time by a factor of 4 could explain the observations with no frequency dependence of the triggering threshold.

California↗

Effects of the earthquake of March 27, 1964 on the communities of Kodiak and nearby islands

The great earthquake (Richter magnitude of 8.4–8.5) that struck south-central Alaska at 5:36 p.m., Alaska standard time, on March 27, 1964 (03:36, March 28, Greenwich mean time), was felt in every community on Kodiak Island and the nearby islands. It was the most severe earthquake to strike this part of Alaska in modern time, and took the lives of 18 persons in the area by drowning; this includes two in Kodiak and three at Kaguyak. Property damage and loss of income to the communities is estimated at more than $45 million. The largest community, Kodiak, had the greatest loss from the earthquake. Damage was caused chiefly by 5.6 feet of tectonic subsidence and a train of 10 seismic sea waves that inundated the low-lying areas of the town. The seismic sea waves destroyed all but one of the docking facilities and more than 215 structures; many other structures were severely damaged. The waves struck the town during the evening hours of March 27 and early morning hours of March 28. They moved from the southwest and northeast: and reached their maximum height of 20–30 feet above mean lower low water at Shahafka Cove between 11:00 and 11:45 p.m., March 27. The violently destructive seismic sea waves not only severely damaged homes, shops, and naval-station structures but also temporarily crippled the fishing industry in Kodiak by destroying the processing plants and most of the fishing vessels. The waves scoured out 10 feet of sediments in the channel between Kodiak Island and Near Island and exposed bedrock. This bedrock presented a major post-earthquake construction problem because no sediments remained into which piles could be driven for foundations of waterfront facilities. Because of tectonic subsidence, high tides now flood Mission and Potatopatch Lakes which, before the earthquake, had not been subject to tidal action. The subsidence also accelerated erosion of the unconsolidated sediments along the shoreline in the city of Kodiak. Seismic shaking lasted 4½–5½ minutes at Kodiak and had a rolling motion. Inasmuch as most of Kodiak is underlain by bedrock or by only a thin veneer of unconsolidated sediments, very little if any damage occurred from ground motion or seismic shaking. The ground motion, however, did cause a massive short circuit and power failure at Kodiak. The Kodiak Naval Station, 5 miles southwest of Kodiak, was also severely damaged by the earthquake. The station was inundated by at least 10 seismic sea waves which reached a maximum height of 25 feet above post-earthquake mean lower low water between 11:16 and 11:34 p.m. on March 27, 1964. The first seismic sea wave that inundated the station did not do severe damage because it behaved much like a rapid rise of tide, but the subsequent and more violent waves destroyed most of the docking facilities and several other shoreline structures. The waves struck the station from the southwest and from the east. The shoreline structures that were not destroyed required rehabilitation because the 5.6 feet of tectonic subsidence put them under water during the highest tides. Furthermore the subsidence accelerated erosion during high tide of the soft unconsolidated sediments and fill in the low-lying areas of the station. Seismic shaking did little damage to the station housing facility, but it was responsible for compaction of sediments, lateral displacement of a seawall, and the development of fissures in the aircraft parking area. The ground motion was as south-southeast–north-northwest to north-south in direction. An unusual case of radioactive contamination was reported at the naval station. The inundating seismic sea waves entered a building in which radionuclides were stored. The contamination was restricted to the building only, however, and did not spread throughout the station. Afognak was abandoned because of the extensive damage incurred from tectonic subsistence and seismic sea waves. The seismic effects, estimated Mercalli intensity VI-VII, did not directly cause any significant property damage at Afognak Serious long-term damage, however, resulted from tectonic subsidence estimated to be from 3½ to 5½ feet. The subsidence has resulted in rapid erosion of the coast, landward shift and building up of bench berms to the new higher sea levels, and flooding of extensive low-lying areas behind the barrier beaches. Inundation of low-lying parts of the village by a train of seismic sea waves having maximum heights of 10.8 feet above post-earthquake tide level (14.5 ft above post-earthquake mean lower low water) caused losses of about half a million dollars to homes, vehicles, bridges, and personal possessions. Uzinki was damaged by tectonic subsidence and seismic sea waves. No significant damage resulted from the ground motion during the earthquake; the Mercalli intensity was about VI. However, tectonic subsidence, estimated to be 5 feet, caused inundation of a narrow zone along the waterfront. Structures and vessels were damaged as a result of the seismic sea waves that repeatedly flooded the waterfront area after the earthquake. Old Harbor was damaged by seismic shock, subsidence, and seismic sea waves. The tremors, which had a Mercalli intensity estimated at VII-VIII, toppled two concrete-block chimneys, cracked interior walls, and caused minor breakage of personal property in the homes. Regional tectonic subsidence and superficial subsidence of the unconsolidated deposits on which the village is situated apparently caused incursion of salt water into the school well. A quarter of million yards of fill was required to raise the waterfront areas to their pre-earthquake elevations relative to sea level. Seismic sea waves having a maximum runup of about 12 feet above tide level (16 ft above post-earthquake mean lower low water) destroyed 34 of the 35 residences in the village and presumably drowned one man who lived immediately across the strait from Old Harbor. At Kaguyak, seismic sea waves having a maximum runup of about 25 feet above mean lower low water carried away all 10 buildings in the village, took three lives, and damaged an unknown number of fishing vessels. The village site has been abandoned. The communities of Akhiok, Karluk, and Larsen Bay were virtually undamaged by the earthquake tremors, which had estimated Mercalli intensities of VI-VII, but tectonic subsidence of about 2–2½ feet at Larsen Bay made it necessary to raise the cannery dock level at an estimated cost of $80,000.

Alaska↗