Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Rock Mechanics and Rock Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS2005

Chapter K: Progress in the Evaluation of Alkali-Aggregate Reaction in Concrete Construction in the Pacific Northwest, United States and Canada

The supply of aggregates suitable for use in construction and maintenance of infrastructure in western North America is a continuing concern to the engineering and resources-management community. Steady population growth throughout the region has fueled demand for high-quality aggregates, in the face of rapid depletion of existing aggregate resources and slow and difficult permitting of new sources of traditional aggregate types. In addition to these challenges, the requirement for aggregates to meet various engineering standards continues to increase. In addition to their physical-mechanical properties, other performance characteristics of construction aggregates specifically depend on their mineralogy and texture. These properties can result in deleterious chemical reactions when aggregate is used in concrete mixes. When this chemical reaction-termed 'alkali-aggregate reaction' (AAR)-occurs, it can pose a major problem for concrete structures, reducing their service life and requiring expensive repair or even replacement of the concrete. AAR is thus to be avoided in order to promote the longevity of concrete structures and to ensure that public moneys invested in infrastructure are well spent. Because the AAR phenomenon is directly related to the mineral composition, texture, and petrogenesis of the rock particles that make up aggregates, an understanding of the relation between the geology and the performance of aggregates in concrete is important. In the Pacific Northwest, some aggregates have a moderate to high AAR potential, but many others have no or only a low AAR potential. Overall, AAR is not as widespread or serious a problem in the Pacific Northwest as in other regions of North America. The identification of reactive aggregates in the Pacific Northwest and the accurate prediction of their behavior in concrete continue to present challenges for the assessment and management of geologic resources to the owners and operators of pits and quarries and to the users of the concrete aggregates mined from these deposits. This situation is complicated by the length of time typically required for AAR to become noticeable in concrete construction in the Pacific Northwest, commonly on such a scale that other deterioration mechanisms may have masked the effects of AAR. Distinguishing between the effects of AAR and those related to other problems in concrete is important for understanding the nature and severity of AAR throughout the Pacific Northwest. Furthermore, developing an understanding of the extent of the problem will assist efforts to maximize the intelligent and stewardly use of aggregate resources in the Pacific Northwest. This chapter illustrates the current 'state of the art' of AAR studies in the Pacific Northwest, a region with a common geologic heritage as well as many distinct geologic elements. The optimal use of aggregates in the construction of concrete structures that will achieve their design life is possible through an understanding of the engineering and geologic properties of these aggregates and of their geologic setting.

Bulletin↗
USGS2026

Sackung at Bald Eagle ridge, central Colorado: An updated interpretation of ridge-spreading movement, structures, and mechanisms from 50 years (1975–2025) of U.S. Geological Survey research

Slow gravitational failures of mountain peaks and ridges are poorly understood. Herein, we report on 50 years of studies at a slowly spreading castellate ridge in the Sawatch Range in central Colorado. The orientations of geomorphic-structural features indicate that the fractured Precambrian granitic rock underlying the ridge has extended and spread northwestward toward the formerly glacier-covered Busk Creek valley. Results from surveying, field-based geomorphic-structural mapping using lidar, rock mass quality measurements, a passive seismic survey, and satellite radar provide a major update to research started by U.S. Geological Survey researchers in the 1970s and 1980s. New insights include a recognition that the entire ridge has slowly moved by concurrent sliding along an inferred northwest dipping, compound basal-slip surface (or zone), and through the formation of multiple grabens by normal faulting and flexural toppling along sets of pre-existing fractures that dip moderately (∼45°) to the southeast. We were unable to distinguish the presence of a sudden and strong contrast in seismic velocity across the inferred slip surface. Movement during the 50-year study period has been episodic and gradually decreasing, in correspondence with decreasing cumulative annual precipitation and increasing mean annual air temperatures. The fastest moving area, just upslope from the glacier trimline, had an average horizontal velocity of 3 – 4 mm/yr. Evidence suggests that movement started as a paraglacial response mechanism, but because of the site’s proximity to the Rio Grande Rift, we cannot exclude earthquake shaking as a mechanism for initiation or enhancement of slope movement. An estimate of longer-term horizontal movement from the exposed basal-slip surface at the uphill side of the ridgetop graben is ∼1.1 mm/yr for the 13 – 14 ky post-glacial period. Broad implications of our work are that: (1) long-term measurements (decades or longer) of slope movement can add insights into how sackungen form and evolve through time; (2) the identification of thrust faults and toes in zones of compression near valley bottoms can be crucial for interpreting sackung failure mechanisms, and (3) the use of passive-seismic techniques to identify the depth to a slip surface may not be successful in granitic terrain dominated by planar fractures and subtle changes in rock-mass characteristics.

Colorado↗
USGS1988

The formation and failure of natural dams

Of the numerous kinds of dams that form by natural processes, dams formed from landslides, glacial ice, and late-neoglacial moraines present the greatest threat to people and property. Landslide dams form in a wide range of physiographic settings. The most common types of mass movements that form landslide dams are rock and debris avalanches; rock and soil slumps and slides; and mud, debris, and earth flows. The most common initiation mechanisms for dam-forming landslides are excessive rainfall and snowmelt and earthquakes. Landslide dams can be classified into six categories based on their relation with the valley floor. Type I dams (11% of 184 landslide dams from around the world that we were able to classify) do not reach from one valley side to the other. Type II dams (44%) span the entire valley floor, in some cases depositing material high on opposite valley sides. Type III dams (41%) move considerable distances both upstream and downstream from the landslide failure. Type IV dams (<1%) are rare and involve the contemporaneous failure of material from both sides of a valley. Type V dams (<1%) also are rare and are created when a single landslide sends multiple tongues of debris into a valley and forms two or more landslide dams in the same reach of river. Type VI dams (3%) involve one or more failure surfaces that extend under the stream or valley and emerge on the opposite valley side. Many landslide dams fail shortly after formation. In our sample of 73 documented landslide-dam failures, 27% of the landslide dams failed less than 1 day after formation, and about 50% failed within 10 days. Over-topping is by far the most common cause of failure. The timing of failure and the magnitude of the resulting floods are controlled by dam size and geometry; material characteristics of the blockage; rate of inflow to the impoundment; size and depth of the impoundment; bedrock control of flow; and engineering controls such as artificial spill-ways, diversions, tunnels, and planned breaching by blasting or conventional excavation. Glacial-ice dams can produce at least nine kinds of ice-dammed lakes. The most dangerous are lakes formed in main valleys dammed by tributary glaciers. Failure can occur by erosion of a drainage tunnel under or through the ice dam or by a channel over the ice dam. Cold polar-ice dams generally drain supraglacially or marginally by downmelting of an outlet channel. Warmer, temperate-ice dams tend to fail by sudden englacial or subglacial breaching and drainage. Late-neoglacial moraine-dammed lakes are located in steep mountain areas affected by the advances and retreats of valley glaciers in the last several centuries. These late-neoglacial dams pose hazards because (1) they are sufficiently young that vegetation has not stabilized their slopes, (2) many dam faces are steeper than the angle of repose, (3) these dams and lakes are immediately downslope from steep crevassed glaciers and near-vertical rock slopes, and (4) downstream from these dams are steep canyons with easily erodible materials that can be incorporated in the flow and increase flood peaks. The most common reported failure mechanism is overtopping and breaching by a wave or series of waves in the lake generated by icefalls, rockfalls, or snow or rock avalanches. Melting of ice cores or frozen ground and piping and seepage are other possible failure mechanisms. Natural dams may cause upstream flooding as the lake rises and downstream flooding as a result of failure of the dam. Although data are few, for the same potential energy at the dam site, ownstream flood peaks from the failure of glacier-ice dams are smaller than those from landslide, moraine, and structed earth-fill and rock-fill dam failures. Moraine-dam failures appear to produce some of the largest downstream flood peaks for potential energy at the dam site greater than 10 11 -10 12 joules. Differences in flood peaks natural-dam failures appear to be controlled by dam characteristics and failure mechanisms.

Geological Society of America Bulletin↗
USGS2023

Damage amplification during repetitive seismic waves in mechanically loaded rocks

Cycles of stress build-up and release are inherent to tectonically active planets. Such stress oscillations impart strain and damage, prompting mechanically loaded rocks and materials to fail. Here, we investigate, under uniaxial conditions, damage accumulation and weakening caused by time-dependent creep (at 60, 65, and 70% of the rocks’ expected failure stress) and repeating stress oscillations (of ± 2.5, 5.0 or 7.5% of the creep load), simulating earthquakes at a shaking frequency of ~ 1.3 Hz in volcanic rocks. The results show that stress oscillations impart more damage than constant loads, occasionally prompting sample failure. The magnitudes of the creep stresses and stress oscillations correlate with the mechanical responses of our porphyritic andesites, implicating progressive microcracking as the cause of permanent inelastic strain. Microstructural investigation reveals longer fractures and higher fracture density in the post-experimental rock. We deconvolve the inelastic strain signal caused by creep deformation to quantify the amount of damage imparted by each individual oscillation event, showing that the magnitude of strain is generally largest with the first few oscillations; in instances where pre-existing damage and/or the oscillations’ amplitude favour the coalescence of micro-cracks towards system scale failure, the strain signal recorded shows a sharp increase as the number of oscillations increases, regardless of the creep condition. We conclude that repetitive stress oscillations during earthquakes can amplify the amount of damage in otherwise mechanically loaded materials, thus accentuating their weakening, a process that may affect natural or engineered structures. We specifically discuss volcanic scenarios without wholesale failure, where stress oscillations may generate damage, which could, for example, alter pore fluid pathways, modify stress distribution and affect future vulnerability to rupture and associated hazards.

Scientific Reports↗
USGS1987

Mechanics of gravitational spreading of steep-sided ridges («sackung»)

Large-scale gravitational spreading of steep-sided ridges characterized by linear fissures, trenches, and uphill-facing scarps high on the sides and tops of ridges are known worldwide. Such spreading, termed sackung, is commonly attributed to pervasive plastic deformation of a rock mass, and is here analyzed as such. Beginning with a previously developed exact elastic solution for gravity-induced stresses in a symmetric ridge, stresses calculated from the exact solution are used in the Coulomb failure criterion to determine the extent of ridge failure under self-weight. Finally, when the regions of failure are established, a plastic flow solution is applied to predict the location of and sense of movement on upward-facing scarps near ridge crests and other features common in sackung. ?? 1987 International Assocaition of Engineering Geology.

Bulletin of the International Association of Engin↗
USGS2023

Revising supraglacial rock avalanche magnitudes and frequencies in Glacier Bay National Park, Alaska

The frequency of large supraglacial landslides (rock avalanches) occurring in glacial environments is thought to be increasing due to feedbacks with climate warming and permafrost degradation. However, it is difficult to (i) test this; (ii) establish cause–effect relationships; and (iii) determine associated lag-times, due to both temporal and spatial biases in detection rates. Here we applied the Google Earth Engine supraglacial debris input detector (GERALDINE) to Glacier Bay National Park & Preserve (GLBA), Alaska. We find that the number of rock avalanches (RAs) has previously been underestimated by 53 %, with a bias in past detections towards large area RAs. In total, GLBA experienced 69 RAs during 1984–2020, with the highest frequency in the last three years. Of these, 58 % were deposited into the accumulation zone and then sequestered into the ice within two years. RA sources clustered spatially at high elevations and around certain peaks and ridges, predominantly at the boundary of modelled permafrost likelihood. They also clustered temporally, occurring mainly between May and September when air temperatures were high enough to initiate rock-permafrost degradation mechanisms. There was a chronic background debris supply from RAs, with at least one RA occurring in all but nine years; however, a debris rich period during 2012–2016 was driven by three large RAs delivering 44 % of all (1984–2020) debris (by area). Comparable investigation of slope-failures in other remote currently glaciated regions is lacking. If RA rates are similar elsewhere, especially the bias towards emplacement onto/into accumulation zones, their contribution to glacial sediment budgets has been globally underestimated.

Alaska↗
USGS1994

Faults and structure in the Pierre Shale, central south Dakota

Numerous faults observed at the surface and (or) determined by geometric and geophysical methods to be present as much as several hundred meters below the surface (near-surface faults) have been mapped in a 2,000-km 2 area west of Pierre, S. Dakota. Many of these faults surround an east-west-trending structural high that has been mapped on the lower part of the Virgin Creek Member of the Pierre Shale. Generally, the geometry and displacement of many of the faults precludes slumping from surficial erosion as a mechanism to explain the faults. Seismic-reflection data indicate that several of the faults directly overlie faults in Precambrian basement that have cumulative vertical displacements of as much as 340 m. The structural high is interpreted to have been uplifted by displacements along faults that cut Upper Cretaceous sedimentary rocks. Recent low-level seismicity and fluvial-geomorphic studies of stream patterns, gradients, and orders suggest that rejuvenation of drainages may be taking place as a result of rebound or other tectonic activity. The studies indicate that repeated uplift and subsidence may have been the cause of extensive faulting mapped in the Pierre Shale since its deposition in Cretaceous time. Surficial fault displacements that cause damage to engineered structures are thought to be the result of construction-induced rebound in the Pierre Shale, although tectonic uplift cannot be ruled out as a cause.

Special Paper of the Geological Society of America↗
USGS1997

Slope failures in Northern Vermont, USA

Rockfalls and debris avalanches from steep hillslopes in northern Vermont are a continuing hazard for motorists, mountain climbers, and hikers. Huge blocks of massive schist and gneiss can reach the valley floor intact, whereas others may trigger debris avalanches on their downward travel. Block movement is facilitated by major joints both parallel and perpendicular to the glacially over-steepened valley walls. The slope failures occur most frequently in early spring, accompanying freeze/thaw cycles, and in the summer, following heavy rains. The study reported here began in August 1986 and ended in June 1989. Manual and automated measurements of temperature and displacement were made at two locations on opposing valley walls. Both cyclic-reversible and permanent displacements occurred during the 13-month monitoring period. The measurements indicate that freeze/thaw mechanisms produce small irreversible incremental movements, averaging 0.53 mm/yr, that displace massive blocks and produce rockfalls. The initial freeze/thaw weakening of the rock mass also makes slopes more susceptible to attrition by water, and heavy rains have triggered rockfalls and consequent debris flows and avalanches. Temperature changes on the rock surface produced time-dependent cyclic displacements of the rock blocks that were not instantaneous but lagged behind the temperature changes. Statistical analyses of the data were used to produce models of cyclic time-dependent rock block behavior. Predictions based solely on temperature changes gave poor results. A model using time and temperature and incorporating the lag effect predicts block displacement more accurately.

Vermont↗
USGS2012

Numerical analysis of the performance of rock weirs: Effects of structure configuration on local hydraulics

River spanning rock structures are being constructed for water delivery as well as to enable fish passage at barriers and provide or improve the aquatic habitat for endangered fish species. Current design methods are based upon anecdotal information applicable to a narrow range of channel conditions. The complex flow patterns and performance of rock weirs is not well understood. Without accurate understanding of their hydraulics, designers cannot address the failure mechanisms of these structures. Flow characteristics such as jets, near bed velocities, recirculation, eddies, and plunging flow govern scour pool development. These detailed flow patterns can be replicated using a 3D numerical model. Numerical studies inexpensively simulate a large number of cases resulting in an increased range of applicability in order to develop design tools and predictive capability for analysis and design. The analysis and results of the numerical modeling, laboratory modeling, and field data provide a process-based method for understanding how structure geometry affects flow characteristics, scour development, fish passage, water delivery, and overall structure stability. Results of the numerical modeling allow designers to utilize results of the analysis to determine the appropriate geometry for generating desirable flow parameters. The end product of this research will develop tools and guidelines for more robust structure design or retrofits based upon predictable engineering and hydraulic performance criteria. ?? 2009 ASCE.

Conference Paper↗
USGS2019

Earthquake stress drop and Arias Intensity

We determine earthquake stress drops directly from the Arias intensity database of NGA-West2. Arias intensity (Arias, 1970) is an engineering measure proportional to the integral of the absolute value of acceleration squared, over the significant duration of the signal. As such, it is closely related to root-mean-square acceleration, and can readily be connected to earthquake stress drop (Hanks and McGuire, 1981). Arias intensity records out to 100 km yield stable stress drops for moderate-to-large magnitude earthquakes, M6.5+; for smaller events ~M4.5 – 6.5, only closer-in records yield stable results. For the 116 events considered, stress drops are about 35% larger for Class 1 mainshocks than for traditional on-fault Class 2 aftershocks, and smaller for those aftershocks close to the main fault plane. Aftershock stress drops show large variability, however, implying that on average they re-rupture weakened patches, but can also rupture intact rock or high-stress asperities. We observe an increase of stress drop with earthquake depth similar to that of other studies but do not find any significant faulting mechanism dependence. The variability of the Arias intensity-based stress drop is lower than that of eGf-based stress drops from Baltay et al. (2010, 2011), and nearly on par with variability seen in ground-motion prediction equations. The Arias intensity stress drop is a novel and promising method to estimate stress drop without the need for path and site corrections, and yields further insight into the connection between source physics and ground-motion.

Journal of Geophysical Research B: Solid Earth↗
USGS1990

Double-diffusive convection in geothermal systems: the Salton Sea, California, geothermal system as a likely candidate

Much has been published about double-diffusive convection as a mechanism for explaining variations in composition and temperature within all-liquid natural systems. However, relatively little is known about the applicability of this phenomenon within the heterogeneous rocks of currently active geothermal systems where primary porosity may control fluid flow in some places and fractures may control it in others. The main appeal of double-diffusive convection within hydrothermal systems is-that it is a mechanism that may allow efficient transfer of heat mainly by convection, while at the same time maintaining vertical and lateral salinity gradients. The Salton Sea geothermal system exhibits the following reservoir characteristics: (1) decreasing salinity and temperature from bottom to top and center toward the sides, (2) a very high heat flow from the top of the system that seems to require a major component of convective transfer of heat within the chemically stratified main reservoir, and (3) a relatively uniform density of the reservoir fluid throughout the system at all combinations of subsurface temperature, pressure, and salinity. Double-diffusive convection can account for these characteristics very nicely whereas other previously suggested models appear to account either for the thermal structure or for the salinity variations, but not both. Hydrologists, reservoir engineers, and particularly geochemists should consider the possibility and consequences of double-diffusive convection when formulating models of hydrothermal processes, and of the response of reservoirs to testing and production.

Geothermics↗
USGS2011

Hydrogeochemical processes governing the origin, transport and fate of major and trace elements from mine wastes and mineralized rock to surface waters

The formation of acid mine drainage from metals extraction or natural acid rock drainage and its mixing with surface waters is a complex process that depends on petrology and mineralogy, structural geology, geomorphology, surface-water hydrology, hydrogeology, climatology, microbiology, chemistry, and mining and mineral processing history. The concentrations of metals, metalloids, acidity, alkalinity, Cl - , F - and SO 4 2- found in receiving streams, rivers, and lakes are affected by all of these factors and their interactions. Remediation of mine sites is an engineering concern but to design a remediation plan without understanding the hydrogeochemical processes of contaminant mobilization can lead to ineffective and excessively costly remediation. Furthermore, remediation needs a goal commensurate with natural background conditions rather than water-quality standards that might bear little relation to conditions of a highly mineralized terrain. This paper reviews hydrogeochemical generalizations, primarily from US Geological Survey research, that enhance our understanding of the origin, transport, and fate of contaminants released from mined and mineralized areas. Mobility of potential or actual contaminants from mining and mineral processing activities depends on (1) occurrence : is the mineral source of the contaminant actually present? (2) abundance : is the mineral present in sufficient quantity to make a difference? (3) reactivity : what are the energetics, rates, and mechanisms of sorption and mineral dissolution and precipitation relative to the flow rate of the water? and (4) hydrology : what are the main flow paths for contaminated water? Estimates of relative proportions of minerals dissolved and precipitated can be made with mass-balance calculations if minerals and water compositions along a flow path are known. Combined with discharge, these mass-balance estimates quantify the actual weathering rate of pyrite mineralization in the environment and compare reasonably well with laboratory rates of pyrite oxidation except when large quantities of soluble salts and evaporated mine waters have accumulated underground. Quantitative mineralogy with trace-element compositions can substantially improve the identification of source minerals for specific trace elements through mass balances. Post-dissolution sorption and precipitation (attenuation) reactions depend on the chemical behavior of each element, solution composition and pH, aqueous speciation, temperature, and contact-time with mineral surfaces. For example, little metal attenuation occurs in waters of low pH (<3.5) and metals tend to maintain element ratios indicative of the main mineral or group of minerals from which they dissolved, except Fe, SiO 2 , and redox-sensitive oxyanions (As, Sb, Se, Mo, Cr, V). Once dissolved, metal and metalloid concentrations are strongly affected by redox conditions and pH. Iron is the most reactive because it is rapidly oxidized by bacteria and archaea and Fe(III) hydrolyzes and precipitates at low pH (1&ndash;3) which is related directly to its first hydrolysis constant, pK 1 = 2.2. Several insoluble sulfate minerals precipitate at low pH including anglesite, barite, jarosite, alunite and basaluminite. Aluminum hydrolyzes near pH 5 (pK 1 = 5.0) and provides buffering and removal of Al by mineral precipitation from pH 4&ndash;5.5. Dissolved sulfate behaves conservatively because the amount removed from solution by precipitation is usually too small relative to the high concentrations in the water column and relative to the flow rate of the water.

Applied Geochemistry↗
USGS2019

Detection of rock bridges by infrared thermal imaging and modeling

Characterization of rock discontinuities and rock bridges is required to define stability conditions of fractured rock masses in both natural and engineered environments. Although remote sensing methods for mapping discontinuities have improved in recent years, remote detection of intact rock bridges on cliff faces remains challenging, with their existence typically confirmed only after failure. In steep exfoliating cliffs, such as El Capitan in Yosemite Valley (California, USA), rockfalls mainly occur along cliff-parallel exfoliation joints, with rock bridges playing a key role in the stability of partially detached exfoliation sheets. We employed infrared thermal imaging (i.e., thermography) as a new means of detecting intact rock bridges prior to failure. An infrared thermal panorama of El Capitan revealed cold thermal signatures for the surfaces of two granitic exfoliation sheets, consistent with the expectation that air circulation cools the back of the partially detached sheets. However, we also noted small areas of warm thermal anomalies on these same sheets, even during periods of nocturnal rock cooling. Rock attachment via rock bridges is the likely cause for the warm anomalies in the thermal data. 2-D model simulations of the thermal behavior of one of the monitored sheets reproduce the observed anomalies and explain the temperature differences detected in the rock bridge area. Based on combined thermal and ground-based lidar imaging, and using geometric and rock fracture mechanics analysis, we are able to quantify the stability of both sheets. Our analysis demonstrates that thermography can remotely detect intact rock bridges and thereby greatly improve rockfall hazard assessment.

California↗
USGS1985

Determination of interstitial chloride in shales and consolidated rocks by a precision leaching technique

We have devised a technique for determining chloride in interstitial water of consolidated rocks. Samples of rocks ranging from 5 to 10 g are crushed and sieved under controlled conditions and then ground with distilled water to submicron size in a closed mechanical mill. After ultra-centrifugation, chloride content is determined by coulometric titration. The chloride concentrations and total pore-water concentrations, obtained earlier from the same pore-water concentrations, obtained earlier from the same samples by low-temperature vacuum desiccation, are used to arrive at the "original" pore-water chloride concentrations by a simple iteration procedure. Interstitial chlorinity results obtained from Cretaceous and Jurassic strata in the Gulf of Mexico coastal areas ranged from 20 to 100 g/kg Cl with reproducibility approaching +/- 1%. We have also applied the technique to igneous and metamorphic bedrocks as well as ocean basalts containing 1 % water or less. Chloride values ranging from 6.7 to 20 g/kg with a reproducibility of about 5% were obtained.

Society of Petroleum Engineers journal↗
USGS1983

Clay mineral formation and transformation in rocks and soils

Three mechanisms for clay mineral formation (inheritance, neoformation, and transformation) operating in three geological environments (weathering, sedimentary, and diagenetic-hydrothermal) yield nine possibilities for the origin of clay minerals in nature. Several of these possibilities are discussed in terms of the rock cycle. The mineralogy of clays neoformed in the weathering environment is a function of solution chemistry, with the most dilute solutions favoring formation of the least soluble clays. After erosion and transportation, these clays may be deposited on the ocean floor in a lateral sequence that depends on floccule size. Clays undergo little reaction in the ocean, except for ion exchange and the neoformation of smectite; therefore, most clays found on the ocean floor are inherited from adjacent continents. Upon burial and heating, however, dioctahedral smectite reacts in the diagenetic environment to yield mixed-layer illite-smectite, and finally illite. With uplift and weathering, the cycle begins again. Refs.

Philosophical Transactions of the Royal Society A:↗
USGS2024

The advantages of electric-grade heat storage in long closed-loop wells

Though long (e.g., tens of kilometers) closed-loop geothermal wells are under consideration for the extraction of subsurface heat, these wells might also serve as an efficient energy storage mechanism for electricity generation. Using a semi-analytic model solution, the potential for electric-grade heat storage as a function of ambient temperature (e.g., corresponds to depth of loop), well length, well diameter, and flow rate is evaluated. The following simplified cases for comparison of standard closed loop operation with energy storage operation were considered: [1] constant flow rate and constant temperature (90 °C) injection to represent the standard closed-loop base-case; and [2] constant flow rate and annual cycle sinusoidal temperature (90-150 °C) to represent seasonal (summer) charging while solar resources are peak. Initial temperatures for all scenarios considered herein are a uniform 175 °C. Electric-grade heat is assumed to be delivered whenever temperatures at the extraction point exceed 90 °C. For calculation purposes only, if temperature falls below 100 °C, it is assumed that heat delivered is sub-economic, so no electricity would be produced. For all scenarios, temperatures at the extraction well asymptotically approach the flow-weighted average injection temperature, but energy storage scenarios exhibited a damped time-varying signal that diminishes in magnitude with length of the loop. The asymptotic approach depends on initial temperatures in the rock and the heat extraction rate (a function of well diameter and flowrate). This analysis demonstrates that shorter closed loops can produce more electricity over time than longer closed-loops previously proposed for electricity production over typical engineering design lifetimes (e.g., 30 years). Although only a high-temperature scenario is considered herein, rock that is initially below boiling temperature would not host a standard closed-loop resource, but injection of hot water seasonally would asymptotically heat this low-temperature system to temperatures capable of electricity production. In other words, regardless of initial temperatures, closed loops could be used to store electricity with no critical minerals in the geothermal battery.

Conference Paper↗
USGS1987

Physical properties of the surface materials at the Viking landing sites on Mars

This report summarizes the results of the Physical Properties Investigation of the Viking '75 Project, activities of the surface samplers, and relevant results from other investigations. The two Viking Landers operated for nearly four martian years after landing on July 20 (Lander 1) and Sept. 3 (Lander 2), 1976; Lander 1 acquired its last pictures on or about Nov. 5, 1982. Lander 1 rests on a smooth, cratered plain at the west edge of Chryse Planitia (22.5 ? N, 48.0? W), and Lander 2 rests 200 km west of the crater Mie in Utopia Planitia (48.0? N, 225.7? W). Lander 1 views showed that dune-like deposits of drift material were superposed on rock-strewn surfaces. Soil-like material from the rock-strewn areas was called blocky material. Lander 2 views also showed a rock-strewn surface. Polygonal to irregular features, etched by the wind, revealed crusty to cloddy material among rocks. Both landers descended to the surface along nearly vertical trajectories. Velocities at touchdown were about 2 m/s for both landers. Footpad 2 of Lander 1 penetrated drift material 0.165 m, and footpad 3 penetrated blocky material 0.036 m. The two visible footpads of Lander 2 struck rocks. Erosion by exhausts from the forward engines produced craters with rims of mixed fine-grained material and platy to equidimensional clods, crusts, and fragments. Comparison of engine-exhaust erosion on Mars with terrestrial data suggested that drift material behaved like a weakly cohesive material with a grain size less than 3-9 /-lm. Although not sand, blocky and crusty to cloddy materials eroded like sand-with grain sizes of 0.01 or 0.2 cm. The surface samplers accomplished an impressive number of tasks. All experiments that required samples received samples. Deep holes, as much as 0.22 m deep, were excavated by both landers. Lander 2 successfully pushed rocks and collected samples from areas originally beneath the rocks. Tasks specifically accomplished for the Physical Properties Investigation include: (1) acquiring motor-current data while excavating trenches, (2) performing surface-bearing tests, (3) performing backhoe touchdowns, (4) attempting to chip or scratch rocks, (5) comminuting samples, (6) measuring subsurface diurnal temperatures, and (7) constructing conical piles of materials on and among rocks. Sample trenches in the three major types of soil-like materials were different from one another. Trenches in drift material, which were typically 0.06 m deep, had steep walls along much of their lengths, lumpy tailings and floors, and smooth domed surfaces with sparse fine fractures around their tips. Trenches in blocky material, which were typically 0.03-0.04 m deep, had steep walls near their tips, and surfaces around their tips were displaced upward and some appeared blocky. Trenches in crusty to cloddy material, which were typically 0.04-0.05 m deep, had steep and often irregular slopes near their tips, clods and slabs of crust in their tailings, and disrupted areas around their tips composed of mixed fine-grained material and slabs of crust or thick polygonal clods that had been displaced upwards. Data acquired during landing, trenching, surface-bearing tests, backhoe touchdowns, and from other science experiments were used to determine the mechanical properties of drift, blocky, and crusty to cloddy materials. Drift material appeared to be very fine grained, with local planes of weakness; in general, the drift material was consistent with a material having an angle of internal friction about 18?, a cohesion ranging from 0.7 to 3.0 kPa, and a bulk density of 1,200 kg/m 3 . Blocky material was consistent with a material having an angle of internal friction about 30?, cohesions from 1.5 to 16 kPa, and a bulk density of 1,600 kg/m 3 . Crusty to cloddy material had variable properties. For chiefly crusty to cloddy material, angles of internal friction were about 35 ? , and cohesions were from 0.5 to 5.2 kPa. For mixed fines and crusts, a

Professional Paper↗
USGS1968

The relationship of geophysical measurements to engineering and construction parameters in the Straight Creek Tunnel pilot bore, Colorado

Seismic-refraction and electrical-resistivity measurements made along the walls of the Straight Creek Tunnel pilot bore indicate that both a low-velocity and a high-resistivity layer exist in the disturbed rock surrounding the excavation. Seismic measurements were analyzed to obtain the thickness and seismic velocity of rock in the low-velocity layer, the velocity of rock behind the layer and the amplitude of seismic energy received at the detectors. Electrical-resistivity measurements were analyzed to obtain the thickness and electrical resistivity of the high-resistivity layer and the resistivity of rock behind the layer. The electrical resistivity and the seismic velocity of rock at depth, the thickness of rock in the low-velocity layer, and the relative amplitude of seismic energy were correlated against the following parameters, all of which are important in tunnel construction: height of the tension arch, stable vertical rock load, rock quality, rate of construction and cost per foot, percentage of lagging and blocking, set spacing, and type and amount of steel support required, The correlations were statistically meaningful, having correlation coefficients ranging in absolute value from about 0·7 to nearly 1·0. This finding suggests the possibility of predicting parameters of interest in tunnel construction from geophysical measurements made in feeler holes drilled ahead of a working face. Predictions might be based on correlations established either during the early stages of construction or from geophysical surveys in other tunnels of similar design in similar geologic environments.

Colorado↗