Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Analytical and Applied Pyrolysis”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,248 records · Page 2Linked to original sources
USGS2025

Impact of gas/liquid phase change of CO2 during injection for sequestration

CO 2 sequestration in deep saline formations is an effective and important process to control the rapid rise in CO 2 emissions. The process of injecting CO 2 requires reliable predictions of the stress in the formation and the fluid pressure distributions – particularly since monitoring of the CO 2 migration is difficult – to mitigate leakage, prevent induced seismicity, and analyze wellbore stability. A key aspect of CO 2 is the gas–liquid phase transition at the temperatures and pressures of relevance to leakage and sequestration, which has been recognized as being critical for accurate predictions but has been challenging to model without ad hoc empiricisms. This paper presents a robust multiphase thermodynamics-based poromechanics model to capture the complex phase transition behavior of CO 2 and predict the stress and pressure distribution under super- and sub- critical conditions during the injection process. A finite element implementation of the model is applied to analyze the behavior of a multiphase porous system with CO 2 as it displaces the fluid brine phase. We find that if CO 2 undergoes a phase transition in the geologic reservoir, the spatial variation of the density is significantly affected, and the migration mobility of CO 2 decreases in the reservoir. A key feature of our approach is that we do not a priori assume the location of the CO 2 gas/liquid interface – or even if it occurs at all – but rather, this is a prediction of the model, along with the spatial variation of the phase of CO 2 and the change of the saturation profile due to the phase change.

Journal of the Mechanics and Physics of Solids↗
USGS2025

Identification of representative earthquakes for probabilistic tsunami hazard analysis (PTHA) using earthquake rupture forecasts and machine learning

As probabilistic tsunami hazard analysis (PTHA) focuses more on assessments for localized, populous regions, techniques are needed to identify a subsample of representative earthquake ruptures to make the computational requirements for producing high-resolution hazard maps tractable. Moreover, the greatest epistemic uncertainty in seismic PTHA is related to source characterization, which is often poorly defined and subjective. We address these two salient issues by applying streamlined earthquake rupture forecasts (ERFs), based on combinatorial optimization methods, to an unsupervised machine learning workflow for identifying representative ruptures. ERFs determine the optimal distribution of a millennia-scale sample of earthquakes by inverting the observed slip rate on major faults. We use two previously developed combinatorial optimization ERFs, integer programming and greedy sequential, to produce the optimal location of ruptures with seismic moments sampled from a regional Gutenberg–Richter magnitude–frequency distribution. These ruptures in turn are used to calculate peak nearshore tsunami amplitude, using computationally efficient tsunami Green's functions. An unsupervised machine learning workflow is then used to identify a small subsample of the earthquakes input to ERFs for onshore PTHA analysis. We eliminate epistemic uncertainty related to source distribution under traditional PTHA analysis; in its place, a quantifiable, less subjective and generally smaller uncertainty related to the input to ERFs is included. The Nankai subduction zone is used as a test case, where previous ERFs have been conducted. Results indicate that the locations of representative earthquakes are sensitive to choice of magnitude–area relation and to whether a minimum cumulative stress objective is imposed on the fault. In general, incorporating ERFs into PTHA provide a physically self-consistent method to incorporate fault slip information in determining representative earthquakes for onshore PTHA, eliminating a major source of epistemic uncertainty.

Nankai subduction zone↗
USGS2026

Rapid seismic and infrasound assessment of large landslides: A case study from Denali National Park and Preserve (Alaska)

Large, rapid landslides are a global hazard that can occur in remote, mountainous areas. Eyewitness reports of landslides and satellite imagery can often be limited or delayed, particularly during inclement weather. However, landslide-generated seismic and infrasound (low-frequency atmospheric sound) waves can be remotely detected in near real-time. This information can significantly expedite characterization and possible landslide response activities. Here, we highlight these capabilities using a > 4 million m³ ice–rock avalanche in Denali National Park and Preserve (Alaska). This event was detected via a landslide-specific seismic location and volume estimation algorithm deployed in Alaska, and — notably — by standard earthquake monitoring systems. Following rapid detection of this event, we combined its seismic and infrasound dataset with optical, synthetic aperture radar, and oblique aerial imagery, multitemporal digital elevation models, and a numerical flow model to reconstruct its failure timeline and dynamics. We apply array processing to infrasound signals traveling > 250 km and find that two precursory events occurred minutes prior to the main failure. We use long-period seismic signals to infer the force exerted by the landslide on the Earth and constrain the rheological parameters of our numerical flow simulation with this result and deposit morphology. The main failure produced a steeply-dipping impulsive initial downward force and reached speeds exceeding 60 m/s. This impulsive force generated relatively strong seismic body waves, which contributed to the earthquake system detection. This large, remote Alaska landslide underscores the key value of seismic and infrasound analysis for rapid landslide assessment and motivates efforts to further operationalize these approaches.

Alaska↗
USGS2026

Nonstationary demographic state-space models using unreplicated counts for species undergoing environmental stressors

A fundamental task in ecological statistics is to estimate abundance and growth rate distributions from wildlife monitoring data to inform conservation management. Modeling time series of wildlife populations presents a number of challenges from both statistical and ecological perspectives, including discreteness; lack of replication; nonstationarity; and observation, demographic, and other phenomenological processes. Nonstationary dynamics are often exhibited by populations undergoing environmental stressors. Models must account for these characteristics to produce reliable estimates of abundance and trends, yet estimation can be challenging with unreplicated data. We propose nonstationary demographic state-space models using unreplicated counts for populations undergoing environmental stressors. A reduced growth rate model matches the complexity of the unreplicated count data, and a fecundity bound on growth rate distributions allows the separation of processes affecting growth rates like environmental stressors from those affecting abundance external to growth rates like migration. NDSSMs allow for the embedding of nonstationary model components, and we explore the use of changepoints, volatility clustering, and migration processes. We apply the proposed nonstationary models in case studies of herons affected by predator/competitor reestablishment and three bat species affected by a fungal pathogen causing white-nose syndrome. Nonstationary models outperform stationary models and generalized linear mixed effects models according to model scoring and visual inspection of predictions, and provide estimates more consistent with published values. Incorporating migration improves model fit universally, even with approximate one-way immigration, most likely because populations are extirpated, recolonized, and increase multiple-fold over the upper bound set by species fecundity. In addition, estimates of the timing and severity of the environmental stressor differed for models with migration. Including nonstationary and demographic components in a fecundity-bounded growth rate model improves inference and benefits interpretability of hyperparameters. In turn, this adjusts uncertainties in predictions of abundance and growth rates over time, providing the ingredients needed for informed conservation analysis and for directing future monitoring of at-risk species.

Journal of Agricultural, Biological and Environmen↗
USGS2026

Sedimentological and geochemical characterization of lacustrine deposits of the Babouri-Figuil basin, northern Cameroon: Implications for source rocks distribution and petroleum exploration

The West and Central African Rift System (WCARS) refers to the series of Cretaceous rift basins where commercial hydrocarbon accumulations have been discovered. Some of the WCARS frontier basins are currently being investigated to increase our understanding of these basins in light of new commercial discoveries. The present study was performed in the Babouri-Figuil Basin (BFB), which is genetically related to the WCARS and constitutes an area of interest in terms of petroleum prospecting, where the distribution of petroleum source rocks and potential targets for petroleum exploration across the entire basin is poorly understood. For the current study, an integrated facies analysis along with organic and inorganic geochemical techniques were applied to the basin's Cretaceous deposits with the aim of reconstructing the paleodepositional environment, assessing factors that triggered the input of organic matter, and providing a spatial overview of the organic matter accumulation in the basin based on outcrop samples. An alluvial fan-lacustrine-braided river system is inferred from the facies analysis of the stratigraphic sequence consisting of conglomerate, sandstone, siltstone, limestone, marlstone, and claystone. Bulk analysis of organic matter reveals that black shale and massive claystone are the main prospective petroleum source rocks in the basin. Inorganic geochemical analyses reveal the influence of anoxic conditions, moderate to high primary productivity, and low terrigenous inputs in organic matter enrichment. The formations rich in organic matter are predominantly concentrated in the western and eastern parts of the basin which may represent areas with depressions, characterized by high accommodation space. In terms of the regional context of the WCARS rift basins, typical hydrocarbon exploration in the BFB may target basal-conglomerate, sandstone beds situated directly above or/and interbedded with the Lower Cretaceous source rocks, and the Upper Cretaceous sandstone beds. Basement rocks (granite, granodiorite, and gneisses) and oil shale deposits may represent potential unconventional hydrocarbon exploration. The current integrated study provides an insight that should guide future hydrocarbon exploration campaigns in the basin.

Babouri-Figuil basin↗
USGS2025

Examining the compositional selectivity of hydrocarbon oxidation products using liquid–liquid extraction and solid-phase extraction techniques

The effect of extraction methods on detecting hydrocarbon oxidation products (HOPs) in groundwater remains unclear. HOPs are polar, water-soluble byproducts of petroleum biodegradation. Our previous work showed that liquid–liquid extraction (LLE), a method commonly used in regulatory monitoring, has a significantly lower extraction efficiency for HOPs compared to solid-phase extraction (SPE). In this study, we evaluate the analytical limitations and compositional selectivity of LLE and SPE using groundwater samples from the Bemidji, MN, crude oil spill site. Optical properties were characterized using excitation–emission matrix spectroscopy (EEMs), and a three-component PARAFAC model was validated, showing consistent trends across both extracts and whole water samples. Ultrahigh-resolution mass spectrometry (UHR-MS) revealed that LLE selectively recovered aliphatic-like compounds but underrepresented more polar oxygenated HOPs. In contrast, SPE methods were more effective at isolating highly oxidized compound classes. These differences were consistent across a gradient of contamination. Overall, the LLE was less precise and less representative of polar HOPs, introducing bias in the characterization of HOPs. This study is the first to quantitatively demonstrate the compositional selectivity and analytical bias of LLE versus SPE for HOPs using combined EEM-PARAFAC and UHR-MS techniques, with implications for long-term monitoring and site assessment protocols.

Environmental Science and Technology↗
USGS2025

Identifying precursors and tracking pulses of magma ascent in multidisciplinary data during the 2018–2023 phreatomagmatic eruption at Semisopochnoi Island, Alaska

The 2018–2023 phreatomagmatic eruptions at Semisopochnoi Island, Alaska produced abundant long-period (LP) seismicity, harmonic and broadband tremor, and explosion signals over several well-monitored periods of eruption and quiescence. The corresponding dataset provides an excellent opportunity to investigate precursory and syn -eruptive geophysical signals of long-lived phreatomagmatic eruptions using multiparameter observations. We generated explosion and LP event catalogs through novel implementations of the REDPy ( Hotovec-Ellis, 2024 ) repeating event detector in mid-2021 following a network upgrade and the onset of a new phase of the eruption. The hundreds of detected explosions show a high degree of infrasound waveform similarity over more than a year, indicating a repeating source mechanism likely associated with explosive magma-water interaction. The seismic LP catalog shows that events began over a month prior to renewed explosive activity at the beginning of August 2021, and that lower frequency index (FI) LPs were generated in the week prior to the onset of explosions. We applied a recently developed machine learning tool (VOISS-Net, Tan et al., 2024 ) to catalog abundant broadband and harmonic seismic tremor recorded before and during the renewed explosive activity, along with LPs and explosions. The tremor catalogs complement the LP and explosion catalogs by filling out the seismic sequence with the dominant signal types. Together, these catalogs reveal a seismic sequence of renewed unrest that started with several weeks of LP events, followed by LPs with lower FI values and harmonic tremor in the days prior to explosive activity, and finally the onset of discrete explosions and broadband eruption tremor. We interpret this sequence as the ascent of a new pulse of magma that first interacted with the hydrothermal/groundwater system to produce LPs, followed by harmonic tremor, and that ultimately drove explosive magma-water interactions and periods of continuous ash emissions. The 2021 seismic sequence, in combination with long-term records of satellite SO 2 emissions, deformation from interferometric synthetic aperture radar (InSAR) analysis, ash sample analysis, infrasound, and volcano tectonic seismicity, allows us to interpret the entire 9-year period of unrest and eruption that began with an intrusion and earthquake swarm in 2014.

Alaska↗
USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗
USGS2025

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California↗
USGS2026

Hyperspectral narrowband imaging spectroscopy: A new paradigm for Earth observation

This editorial introduces the Special Issue entitled “Hyperspectral Narrowband Imaging Spectroscopy: A New Paradigm for Earth Observation” in the August 2026 issue of Photogrammetric Engineering & Remote Sensing (PE&RS), the flagship journal of the American Society for Photogrammetry and Remote Sensing (ASPRS). This volume represents the fourth dedicated hyperspectral special issue published in PE&RS, following earlier contributions by Thenkabail et al. (2025, 2024a, 2024b), and continues ASPRS’s commitment to advancing cutting‑edge imaging spectroscopy research and its applications across Earth system science. Remote sensing is undergoing one of the most profound transformations in its history. The emergence of hyperspectral narrowband (HNB) imaging spectroscopy data, capable of acquiring hundreds of contiguous, narrow spectral bands, has shifted the discipline from observing Earth in a handful of broad spectral windows to capturing continuous spectral signatures of the Planet. This transition marks a decisive break from the multispectral paradigm that has dominated satellite remote sensing for nearly five decades, driven by the advent of new orbital imaging spectrometers such as EnMAP, PRISMA, and NASA’s EMIT, and by the forthcoming Surface Biology and Geology (SBG) mission ((Pires Silva et al., 2026; Bourriz et al., 2025; Thenkabail et al., 2025; Chabrillat et al., 2024; Aneece et al., 2024; Dave et al., 2024; Thenkabail et al., 2024a; Thenkabail et al., 2024b; Thenkabail, 2024a; Thenkabail, 2024b; Thompson et al., 2022; Kokaly et al., 2022; Aneece & Thenkabail, 2022; Cawse Nicholson et al., 2021; Guanter et al., 2021; Vangi et al., 2021; Thenkabail et al., 2021). These missions (e.g., Table 1) deliver unprecedented spectral fidelity, improved signal to noise ratios, and global coverage capabilities, enabling a new era of quantitative, spectroscopy based Earth observation. Where multispectral broadbands (MBBs) provide only a few discrete measurements along the electromagnetic spectrum, HNB systems deliver rich, diagnostic information that enables scientists to characterize Earth’s surface with unprecedented biochemical, biophysical, and structural detail (Figure 1a, 1b). The implications for environmental monitoring, agriculture, water resources, and mineral exploration are profound. Several overarching themes emerge: • Spectral fidelity matters. The ability to preserve subtle absorption features is essential for mineral mapping, vegetation trait retrieval, and biochemical modeling. • AI and deep learning are indispensable. From destriping to classification, modern analytics must be scalable, label‑efficient, and capable of exploiting the full spectral–spatial richness of HNB data. • Physics‑based and data‑driven approaches must converge. Radiative transfer models such as PROSAIL, enhanced with localized soil parameterizations, remain foundational for biophysical retrievals and model‑based inference. • Dimensionality reduction and feature extraction are critical. Techniques such as L1‑ISOMAP demonstrate that intelligent manifold learning can unlock the structure of fused, high‑dimensional datasets. • Next‑generation architectures must be interactive and multimodal. ICTNet exemplifies the future of hyperspectral classification: hybrid, synergistic, and capable of modeling both local textures and global spectral dependencies.

Photogrammetric Engineering and Remote Sensing (PE↗
USGS2025

Earth Mapping Resources Initiative protocols—Sampling hard-rock mine waste and perpetual mine water sources

Supporting the overarching goal to evaluate critical minerals nationwide, the mine waste characterization effort in the U.S. Geological Survey (USGS) Earth Mapping Resources Initiative has created a series of protocols to standardize sampling carried out under this effort by the participating State geological surveys and their cooperators. The protocols are based on published, reviewed methods that can be deployed in the field. The protocols include (1) collecting and processing composite samples of mine and mill waste, including tailings, waste rock, gangue, heap leach piles, ore stockpiles, slag, or other mineralized and processed materials and (2) collecting and preserving water samples from perpetual or long-term mine water sources. The protocols also specify information to document on field sheets and detail the collection of geospatial data. The analytical methods used by the USGS and USGS contract laboratories are described in this report, including the data delivery pathway for USGS-derived data.

Scientific Investigations Report↗
USGS2024

Three-dimensional temperature maps of the Williston Basin, USA: Implications for deep hot sedimentary and enhanced geothermal resources

As part of U.S. Geological Survey's (USGS) efforts to identify and assess geothermal energy resources of the US, a three-dimensional (3D) geologic and thermal model has been constructed for the Williston Basin, USA. The geologic model consists of all sedimentary units above the Proterozoic and Archean crystalline rock (called basement herein), with a total sedimentary thickness of up to 5 km near the basin center. Twenty-nine geologic units were mapped from interpreted formation tops from 16,465 wells. A 3D temperature model was constructed to a depth of 7 km by constructing a 3D heat flow model for the sedimentary units, followed by estimating underlying temperature using a one-dimensional (1D) analytic solution for heat flow within the underlying crystalline basement. Using the sedimentary basin model, heat flow was simulated in 3D and was calibrated using three temperature datasets: 1) 24 high-confidence static temperature logs (equilibrium thermal profiles), 2) more than15,000 drill stem test (DST) measurements from >7,000 wells, and 3) more than 45,000 bottomhole temperature (BHT) measurements from >14,000 wells. The DST and BHT datasets provide broad spatial coverage, but are lower confidence, primarily because measurements were made prior to attaining thermal equilibrium. DST and BHT measurements were binned regionally to develop representative thermal profiles that generally agree with these lower quality data (hereafter called pseudowell temperature profiles). Layer properties (primarily thermal conductivity and compaction curves) were set to best estimate values, then the heat flow model was calibrated to fit pseudowell and static temperature logs primarily by adjusting basal heat flow to approximate the overall temperature profile. Minor adjustments to thermal conductivity allowed adjusting changes in slope at lithologic contacts. Resulting maps include 3D temperature and basal (bottom of sedimentary units) heat flow estimates, which are used as input for the temperature model of the basement. The crystalline basement temperature model uses an analytic 1D solution to the heat flow equation that requires estimates of heat flow and temperature at the upper boundary (i.e., the sediment/basement contact), radiogenic heat production within the crystalline basement, and reference thermal conductivity (i.e., uncorrected for temperature). Two regions of high heat flow are identified: 1) in western North Dakota along the North American Central Plains Conductivity Anomaly and 2) in eastern Montana near the Poplar dome. Within the sedimentary column in the center of the basin of the basin, an area of approximately 100,000 km2 is predicted to have moderate- to high-temperature geothermal resources (>90 °C) under the thickest sequences of sediments. Where thick insulation and high heat flow coincide, electric-grade resources can be less than 4 km deep. Assuming a maximum feasible drilling depth of 7 km, temperatures are predicted to be as high as 175 °C. The geologic model may be used to identify strata at sufficient temperatures that may have natural permeability or that may have conditions that favor development of enhanced/engineered geothermal systems resources.

Montana, North Dakota, South Dakota↗
USGS2026

Simulated ground motion dataset in the Azores Plateau, Portugal, on rock and soil sites

Building on a previously developed bedrock dataset, this study extends the Azores Plateau ground motion simulations to include soil-amplified records and introduces a comprehensive validation framework. Soil amplification is modeled using one-dimensional soil profiles. A stochastic source-based approach is employed to generate the dataset, incorporating randomization of input-model parameters to account for the aleatory uncertainty in seismic activity. The accuracy of the dataset is verified through a comprehensive validation framework, showing that the randomization effectively captures variance and inter-period correlation observed in records. This work provides a robust dataset for advancing seismic hazard and risk assessment in the Azores Plateau.

central and eastern Azores islands↗
USGS2026

Perspectives and insights gained from applying landscape ecological approaches to the Upper Mississippi riverscape

Advances in remote sensing, spatial data collection, hydraulic and geospatial models, and the maturation of landscape ecology during the early 2000s spurred the concept of rivers as landscapes or ‘riverscapes’. Since that time, the Upper Mississippi River Restoration (UMRR) Program - one of the world’s longest running large-river ecosystem restoration and monitoring programs - has applied landscape ecological principles to the Upper Mississippi River System (UMRS). I examine spatial patterns of aquatic nutrient concentrations, submersed aquatic vegetation, and fish and mussel communities, finding that within-river patterns are often patchy in nature, likely resulting from how nutrient processes and community traits interact with spatial variability in hydraulic exchange patterns. Local-scale patchy spatial patterns in the UMRS are embedded in system-scale longitudinal gradients and a hierarchical view of the river has provided a foundation for strategic river restoration planning. Key Words: Aquatic Habitat, hydraulic connectivity, patch, restoration, riverscape

BioScience↗
USGS2025

Multi-scale predictors of Northern Long-eared Bat (Myotis septentrionalis) occupancy in the United States

Historically, Myotis septentrionalis (Northern Long eared Bat) was among the most common forest-interior species in North America. Largely due to high mortality from white-nose syndrome, this species has experienced severe population declines across its range. To create an updated species distribution map representing summer occupancy probabilities from 2017 to 2022, we integrated stationary acoustic data with live-capture data from the database of the North American Bat Monitoring Program into a multi-scale, multi-method occupancy modeling framework. Our results provide data-driven predictions with quantified uncertainty for summer occupancy probabilities for Northern Long-eared Bats at 2 spatial scales across the range of the species, while also accounting for inherent observation biases (e.g., imperfect detection).

Journal of North American Bat Research↗
USGS2026

The damability function: A probabilistic approach to regional landslide dam susceptibility analysis applied to the Oregon Coast Range, USA

Landslides can dam rivers and require rapid response to mitigate catastrophic outburst floods. Here, we present a workflow to map landslide dam formation susceptibility at a regional scale. We define a probabilistic function that combines river valley width and landslide volume to efficiently determine the likelihood of a landslide dam or “damability”. We combine damability values with landslide susceptibility to estimate landslide dam susceptibility. The valley width measurements are automated using a new elevation threshold-based algorithm. Landslide volume is represented as a statistical distribution from mapped landslides. We validate and apply our approach to the Oregon Coast Range, USA and find that 36 % of river stretches exceed a dam potential threshold; these are in river headwaters and steeper terrain, which in this case correlate with more resistant lithologies. We also estimate volumes of the potential dammed lakes and find that most rivers with high dam susceptibility are less likely to impound large lakes because they have low drainage areas. However, widespread susceptibility, and the potential impacts from exceptionally large landslides, suggest that this hazard should be considered in the Pacific Northwest. The damability function workflow can ingest new data and be applied more broadly to assess future landslide dam hazards.

Oregon↗
USGS2025

USGS addresses needs for lithium calibration and quality control materials for pLIBS analysis

Lithium (Li) is a globally important commodity used for energy storage, national defense, human health, and advanced technologies. Lithium resource development requires identifying deposits with elevated concentrations and optimal mineralogy, typically associated with select clays and pegmatites. Lithium is a light, highly reactive alkali metal with low atomic mass that is difficult to detect and quantify using conventional portable geochemical techniques such as X-ray fluorescence (XRF). However, portable laser-induced breakdown spectroscopy (pLIBS) is a powerful analytical technique for lithium exploration due to its ability to analyze solids quickly with minimal preparation. The expanded utility of pLIBS is hampered by the lack of matrix-matched calibration and quality control (QC) materials. The United States Geological Survey (USGS) has developed in-house lithium calibration and QC materials for lithium in clay and pegmatite matrices to address this limitation. We present the workflow and implementation of a custom-built matrix specific calibration on a SciAps Z-300 pLIBS, using proprietary Profile Builder software. The implementation of the custom calibration and quality control standards enables us to collect semiquantitative results directly from the pLIBS while in the field. Ultimately, this calibration has improved confidence in sample selection and collection in the field, providing more efficient site characterization.

Conference Paper↗