Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Explorer”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
USGS1977

Estimation of the probability of success in petroleum exploration

A probabilistic model for oil exploration can be developed by assessing the conditional relationship between perceived geologic variables and the subsequent discovery of petroleum. Such a model includes two probabilistic components, the first reflecting the association between a geologic condition (structural closure, for example) and the occurrence of oil, and the second reflecting the uncertainty associated with the estimation of geologic variables in areas of limited control. Estimates of the conditional relationship between geologic variables and subsequent production can be found by analyzing the exploration history of a "training area" judged to be geologically similar to the exploration area. The geologic variables are assessed over the training area using an historical subset of the available data, whose density corresponds to the present control density in the exploration area. The success or failure of wells drilled in the training area subsequent to the time corresponding to the historical subset provides empirical estimates of the probability of success conditional upon geology. Uncertainty in perception of geological conditions may be estimated from the distribution of errors made in geologic assessment using the historical subset of control wells. These errors may be expressed as a linear function of distance from available control. Alternatively, the uncertainty may be found by calculating the semivariogram of the geologic variables used in the analysis: the two procedures will yield approximately equivalent results. The empirical probability functions may then be transferred to the exploration area and used to estimate the likelihood of success of specific exploration plays. These estimates will reflect both the conditional relationship between the geological variables used to guide exploration and the uncertainty resulting from lack of control. The technique is illustrated with case histories from the mid-Continent area of the U.S.A. ?? 1977 Plenum Publishing Corp.

Journal of the International Association for Mathe↗
USGS2006

Idaho and Montana non-fuel exploration database 1980-1997

This report describes a relational database containing information about mineral exploration projects in the States of Idaho and Montana for the years 1980 through 1997 and a spatial (geographic) database constructed using data from the relational database. The focus of this project was to collect information on exploration for mineral commodities with the exception of sand, gravel, coal, geothermal, oil, and gas. The associate databases supplied with this report are prototypes that can be used or modified as needed. The following sources were used to create the databases-serial mining periodicals; annual mineral publications; mining company reports; U.S. Bureau of Mines (USBM) and U.S. Geological Survey (USGS) publications; an Idaho mineral property data base developed by Dave Boleneus, USGS, Spokane, Washington; Montana state publications; and discussions with representatives of Montana, principally the Montana Bureau of Mines and Geology and the Department of Environmental Quality. Fifty commodity groups were reported between the 596 exploration projects identified in this study. Precious metals (gold, silver, or platinum group elements) were the primary targets for about 67 percent of the exploration projects. Information on 17 of the projects did not include commodities. No location could be determined for 51 projects, all in Idaho. During the time period evaluated, some mineral properties were developed into large mining operations (for example Beal Mountain Mine, Stillwater Mine, Troy Mine, Montana Tunnels Mine) and six properties were reclaimed. Environmental Impact Statements were done on four properties. Some operating mines either closed or went through one or more shutdowns and re-openings. Other properties, where significant resources were delineated by recent exploration during this time frame, await the outcome of important factors for development such as defining additional reserves, higher metal prices, and the permitting process. Many of these projects examined relatively minor mineral occurrences. Approximately half of the exploration projects are located on Federal lands and about 40 percent were on lands managed by the U.S. Forest Service. More than 75 percent of the exploration occurred in areas with significant previous mineral activity.

Data Series↗
USGS1998

Mining properties in Washington that were involved in the DMA, DMEA, OME Mineral Exploration Programs, 1950-1974

Introduction This report and accompanying map (Plate 1) presents information on the Defense Minerals Administration (DMA), Defense Minerals Exploration Administration (DMEA), and Office of Minerals Exploration (OME) mineral exploration programs in Washington. Under these programs, the federal government participated in the exploration costs for certain strategic and critical minerals. Federal funds for mineral exploration under the programs were available from 1950 to 1974, although limited funds for OME administrative work were continued until 1979. The report reviews the three programs, associated regulations, administrative procedures, and operational techniques. It also describes the various types of informative reports generated by the programs, lists mining properties in Washington that were involved in the exploration programs, and advises on location of compiled exploration information that resulted from the work.

Washington↗
USGS2007

Analysis of improved government geological map information for mineral exploration: Incorporating efficiency, productivity, effectiveness, and risk considerations

This bulletin/professional paper focuses on the value of geoscientific information and knowledge, as provided in published government bedrock geological maps, to the mineral exploration sector. An economic model is developed that uses an attribute- ranking approach to convert geological maps into domains of mineral favourability. Information about known deposits in these (or analogous) favourability domains allow the calculation of exploration search statistics that provide input into measures of exploration efficiency, productivity, effectiveness, risk, and cost stemming from the use of the published geological maps. Two case studies, the Flin Flon Belt (Manitoba and Saskatchewan) and the south Baffin Island area (Nunavut), demonstrate that updated, finer resolution maps can be used to identify more exploration campaign options, and campaigns thats are more efficient, more effective, and less risky than old, coarser resolution maps when used as a guide for mineral exploration. The Flin Flon Belt study illustrates that an updated, coarser resolution bedrock map enables improved mineral exploration efficiency, productivity, and effectiveness by locating 60% more targets and supporting an exploration campaign that is 44% more efficient. Refining the map resolution provides an additional 17% reduction in search effort across all favourable domains and a 55% reduction in search effort in the most favourable domain. The south Baffin Island case study projects a 40% increase in expected targets and a 27% reduction in search effort when the updated, finer resolution map is used in lieu of the old, coarser resolution map. On southern Baffin Island, the economic value of the up dated map ranges from CAN$2.28 million to CAN$15.21 million, which can be compared to the CAN$1.86 million that it cost to produce the map (a multiplier effect of up to eight).

Professional Paper↗
USGS2003

Stratigraphy and vertical hydraulic conductivity of the St. Francois Confining Unit in the Viburnum Trend and evaluation of the Unit in the Viburnum Trend and exploration areas, southeastern Missouri

The confining ability of the St. Francois confining unit (Derby-Doerun Dolomite and Davis Formation) was evaluated in ten townships (T. 31?35 N. and R. 01?02 W.) along the Viburnum Trend of southeastern Missouri. Vertical hydraulic conductivity data were compared to similar data collected during two previous studies 20 miles south of the Viburnum Trend, in two lead-zinc exploration areas that may be a southern extension of the Viburnum Trend. The surficial Ozark aquifer is the primary source of water for domestic and public-water supplies and major springs in southern Missouri. The St. Francois confining unit lies beneath the Ozark aquifer and impedes the movement of water between the Ozark aquifer and the underlying St. Francois aquifer (composed of the Bonneterre Formation and Lamotte Sandstone). The Bonneterre Formation is the primary host formation for lead-zinc ore deposits of the Viburnum Trend and potential host formation in the exploration areas. For most of the more than 40 years the mines have been in operation along the Viburnum Trend, about 27 million gallons per day were being pumped from the St. Francois aquifer for mine dewatering. Previous studies conducted along the Viburnum Trend have concluded that no large cones of depression have developed in the potentiometric surface of the Ozark aquifer as a result of mining activity. Because of similar geology, stratigraphy, and depositional environment between the Viburnum Trend and the exploration areas, the Viburnum Trend may be used as a pertinent, full-scale model to study and assess how mining may affect the exploration areas. Along the Viburnum Trend, the St. Francois confining unit is a complex series of dolostones, limestones, and shales that generally is 230 to 280 feet thick with a net shale thickness ranging from less than 25 to greater than 100 feet with the thickness increasing toward the west. Vertical hydraulic conductivity values determined from laboratory permeability tests were used to represent the St. Francois confining unit along the Viburnum Trend. The Derby-Doerun Dolomite and Davis Formation are statistically similar, but the Davis Formation would be the more hydraulically restrictive medium. The shale and carbonate values were statistically different. The median vertical hydraulic conductivity value for the shale samples was 62 times less than the carbonate samples. Consequently, the net shale thickness of the confining unit along the Viburnum Trend significantly affects the effective vertical hydraulic conductivity. As the percent of shale increases in a given horizon, the vertical hydraulic conductivity decreases. The range of effective vertical hydraulic conductivity for the confining unit in the Viburnum Trend was estimated to be a minimum of 2 x 10-13 ft/s (foot per second) and a maximum of 3 x 10-12 ft/s. These vertical hydraulic conductivity values are considered small and verify conclusions of previous studies that the confining unit effectively impedes the flow of ground water between the Ozark aquifer and the St. Francois aquifer along the Viburnum Trend. Previously-collected vertical hydraulic conductivity data for the two exploration areas from two earlier studies were combined with the data collected along the Viburnum Trend. The nonparametric Kruskal-Wallis statistical test shows the vertical hydraulic conductivity of the St. Francois confining unit along the Viburnum Trend, and west and east exploration areas are statistically different. The vertical hydraulic conductivity values generally are the largest in the Viburnum Trend and are smallest in the west exploration area. The statistical differences in these values do not appear to be attributed strictly to either the Derby-Doerun Dolomite or Davis Formation, but instead they are caused by the differences in the carbonate vertical hydraulic conductivity values at the three locations. The calculated effective vertical hydraulic conductivity range for the St. Franc

Water-Resources Investigations Report↗
USGS1978

Conceptual models in exploration geochemistry-The Basin and Range Province of the Western United States and Northern Mexico

This summary of geochemical exploration in the Basin and Range Province is another in the series of reviews of geochemical-exploration applications covering a large region; this series began in 1975 with a summary for the Canadian Cordillera and Canadian Shield, and was followed in 1976 by a similar summary for Scandinavia (Norden). Rather than adhering strictly to the type of conceptual models applied in those papers, we have made use of generalized landscape geochemistry models related to the nature of concealment of ore deposits. This study is part of a continuing effort to examine and evaluate geochemical-exploration practices in different areas of the world. Twenty case histories of the application of geochemical exploration in both district and regional settings illustrate recent developments in techniques and approaches. Along with other published reports these case histories, exemplifying generalized models of concealed deposits, provide data used to evaluate geochemical-exploration programs and specific sample media. Because blind deposits are increasingly sought in the Basin and Range Province, the use of new sample media or anomaly-enhancement techniques is a necessity. Analysis of vapors or gases emanating from blind deposits is a promising new technique. Certain fractions of stream sediments show anomalies that are weak or not detected in conventional minus 80-mesh fractions. Multi-element analysis of mineralized bedrock may show zoning patterns that indicate depth or direction of ore. Examples of the application of these and other, more conventional methods are indicated in the case histories. The final section of this paper contains a brief evaluation of the applications of all types of sample media to geochemical exploration in the arid environment of the Basin and Range Province. ?? 1978.

Journal of Geochemical Exploration↗
USGS2005

Historical development of the gravity method in exploration

The gravity method was the first geophysical technique to be used in oil and gas exploration. Despite being eclipsed by seismology, it has continued to be an important and sometimes crucial constraint in a number of exploration areas. In oil exploration the gravity method is particularly applicable in salt provinces, overthrust and foothills belts, underexplored basins, and targets of interest that underlie high-velocity zones. The gravity method is used frequently in mining applications to map subsurface geology and to directly calculate ore reserves for some massive sulfide orebodies. There is also a modest increase in the use of gravity techniques in specialized investigations for shallow targets. Gravimeters have undergone continuous improvement during the past 25 years, particularly in their ability to function in a dynamic environment. This and the advent of global positioning systems (GPS) have led to a marked improvement in the quality of marine gravity and have transformed airborne gravity from a regional technique to a prospect-level exploration tool that is particularly applicable in remote areas or transition zones that are otherwise inaccessible. Recently, moving-platform gravity gradiometers have become available and promise to play an important role in future exploration. Data reduction, filtering, and visualization, together with low-cost, powerful personal computers and color graphics, have transformed the interpretation of gravity data. The state of the art is illustrated with three case histories: 3D modeling of gravity data to map aquifers in the Albuquerque Basin, the use of marine gravity gradiometry combined with 3D seismic data to map salt keels in the Gulf of Mexico, and the use of airborne gravity gradiometry in exploration for kimberlites in Canada.

Geophysics↗
USGS1998

Mining properties in Oregon that were involved in the DMA, DMEA, or OME mineral exploration programs, 1950-1974

Introduction This report and accompanying map (Plate 1) presents information on the Defense Minerals Administration (DMA), Defense Minerals Exploration Administration (DMEA), and Office of Minerals Exploration (OME) mineral exploration programs in Oregon. Under these programs, the federal government participated in the exploration costs for certain strategic and critical minerals. Federal funds for mineral exploration under the programs were available from 1950 to 1974, although limited funds for OME administrative work were continued until 1979. The report reviews the three programs, associated regulations, administrative procedures, and operational techniques. It also describes the various types of informative reports on individual mining properties generated by the programs, lists properties in Oregon that were involved in the different exploration programs, and advises on the location of compiled information that resulted from the work.

Oregon↗
USGS2011

Cobalt mineral exploration and supply from 1995 through 2013

The global mining industry has invested a large amount of capital in mineral exploration and development over the past 15 years in an effort to ensure that sufficient resources are available to meet future increases in demand for minerals. Exploration data have been used to identify specific sites where this investment has led to a significant contribution in global mineral supply of cobalt or where a significant increase in cobalt production capacity is anticipated in the next 5 years. This report provides an overview of the cobalt industry, factors affecting mineral supply, and circumstances surrounding the development, or lack thereof, of key mineral properties with the potential to affect mineral supply. Of the 48 sites with an effective production capacity of at least 1,000 metric tons per year of cobalt considered for this study, 3 producing sites underwent significant expansion during the study period, 10 exploration sites commenced production from 1995 through 2008, and 16 sites were expected to begin production by 2013 if planned development schedules are met. Cobalt supply is influenced by economic, environmental, political, and technological factors affecting exploration for and production of copper, nickel, and other metals as well as factors affecting the cobalt industry. Cobalt-rich nickel laterite deposits were discovered and developed in Australia and the South Pacific and improvements in laterite processing technology took place during the 1990s and early in the first decade of the 21st century when mining of copper-cobalt deposits in Congo (Kinshasa) was restricted because of regional conflict and lack of investment in that country's mining sector. There was also increased exploration for and greater importance placed on cobalt as a byproduct of nickel mining in Australia and Canada. The emergence of China as a major refined cobalt producer and consumer since 2007 has changed the pattern of demand for cobalt, particularly from Africa and Australasia. Chinese companies are increasingly becoming involved in copper and cobalt exploration and mining in Congo (Kinshasa) and Zambia as well as nickel, copper, and other mining in Australia and the South Pacific. Between 2009 and 2013, mines with a cumulative capacity of more than 100,000 metric tons per year of cobalt were proposed to come into production if all sites came into production as scheduled. This additional capacity corresponds to 175 percent of the 2008 global refinery production level. About 45 percent of this cobalt would be from primary nickel deposits, about 32 percent from primary copper deposits, and about 21 percent from primary cobalt deposits. By 2013, about 40 percent of new capacity was expected to come from the African Copperbelt; 38 percent, from Australia and the South Pacific countries of Philippines, Indonesia, New Caledonia, and Papua New Guinea; 11 percent, from other African countries; 5 percent, from North America; and 6 percent, from other areas.

Scientific Investigations Report↗
USGS2023

One byte at a time: Gathering best practices, guidelines, and resources for data standards to support ocean exploration and characterization

Initiated through Presidential direction and now codified, the National Ocean Mapping, Exploration, and Characterization (NOMEC) Council comprises leaders from U.S. federal agencies with a shared goal of mapping all waters of the United States and exploring and characterizing priority areas. The NOMEC Council’s two Interagency Working Groups, Ocean and Coastal Mapping (IWG-OCM) and Ocean Exploration and Characterization (IWG-OEC), both achieved major milestones recently with the 2023 release of the Draft Standard Ocean Mapping Protocols (SOMP) and the 2022 publication of the National Priorities for Ocean Exploration and Characterization. Building on this groundwork, the IWG-OEC is now looking to define and share best practices, guidelines, and resources for ocean exploration and characterization with the long-term goal of increasing community wide standardization to help achieve consistent common practices. First, the IWG-OEC plans to compile federal agency resources and share them in a newly developed online resource repository. The next phase is for the IWG-OEC to create opportunities for non-federal sectors to provide input on developing and populating this repository with additional content (existing standards and protocols, best practice and guidelines documents, etc.). After experts representing multiple sectors are identified, a series of results-oriented workshops are planned to provide input on all aspects of the data, products, and services from exploration and characterization. Finally, the IWG-OEC plans to widely share the online repository of best practices and standard operating procedures. A systematic, transparent, and collaborative process to share standards and protocols can help to enhance the interoperability of data and inform new lines of inquiry, discovery, research, and innovation.

Frontiers in Marine Science↗
USGS2011

Young (<7 Ma) gold deposits and active geothermal systems of the Great Basin: Enigmas, questions, and exploration potential

Young gold systems in the Great Basin (£ 7 Ma), though not as well studied as their older counterparts, comprise a rapidly growing and in some ways controversial group. The gold inventory for these systems has more than doubled in the last 5 years from roughly 370 tonnes (12 Moz) to 890 tonnes (29 Moz). Although these deposits are characterized by low grades, tonnages can be high and stripping ratios low, and they have been mined profitably, as exemplified by Florida Canyon and Hycroft. Active geothermal systems in the Great Basin also comprise a rapidly growing group, as evidenced by a number of recent discoveries of geothermal groundwater and a more than 50% increase in electricity production capacity from these systems in the last 5 years. Many young gold deposits are closely associated with active geothermal systems, suggesting that gold deposits may be forming today in the Great Basin. Measured or estimated geothermal reservoir temperatures commonly approach or exceed 200∞C, and other characteristics and processes (advanced argillic caps, hydrothermal eruption breccias) of these young deposits resemble those of nearby Tertiary precious metal deposits. Nonetheless, many young gold systems, especially in Nevada, are not associated with coeval igneous rocks. Similarly, almost all electricity-grade geothermal systems in Nevada are not associated with Quaternary silicic volcanic rocks, and have lower temperature gradients, lower 3He/4He ratios, and lower dissolved trace element concentrations than most magmatic-heated geothermal systems elsewhere in the world. The increasing economic significance of young gold deposits and active geothermal systems justifies more research to better understand their origins, particularly because in some aspects they remain enigmatic and controversial. Are young gold deposits in Nevada truly amagmatic, or have they received metal and fluid contributions from magmas deeper within the crust? Has gold in these deposits been remobilized from older gold mineralization? Current research is investigating these and other questions to improve our genetic understanding of these young gold systems, which in turn can lead to improved exploration targeting. The recent rapid growth in resources for both young gold deposits and geothermal systems underscores their underdeveloped exploration potential. Even though many young gold deposits exhibit relatively shallow hot-springs-style mineralization, their young age may preclude exposure by erosion. Uplift along active normal faults has exposed some deposits (e.g., Florida Canyon, Dixie Comstock, Wind Mountain), but in other areas, such as the Walker Lane, where strike-slip faulting is prevalent, the opportunities for exposure can be limited. Many active geothermal systems are also concealed below the surface in that hot springs or steam vents may be absent above areas of thermal groundwater. With sources of energy to support mine production becoming more problematic, the potential advantages of simultaneously exploring for young gold deposits and spatially associated geothermal systems are becoming more apparent. Exploration methods recently proven effective in geothermal exploration that can be adapted to gold exploration include temperature surveys, hyperspectral remote sensing, geophysical surveys, water analyses, and detailed mapping of geothermal-related features and related fault systems.

Conference Paper↗
USGS2025

Enhancing mineral systems exploration through geochronology, thermochronology, and isotope analysis: USGS Geochron and USGS Isotope databases

A mineral systems approach to mineral exploration provides a comprehensive framework for understanding ore deposit formation by examining the geodynamic, magmatic, hydrothermal, and sedimentary processes responsible for mineralization, alteration, and remobilization of economic mineral deposits. Temporal and thermal constraints on ore genesis are crucial for refining mineral system models and guiding predictive exploration strategies. Geochronology and thermochronology offer invaluable insights into the timing and thermal evolution of ore-forming processes, whereas isotopic analyses provide critical information on the source and geochemical history of ore-forming fluids. Combining these methodologies have proven highly effective for mineral exploration in regions like Australia, however, their combined application has been limited in the United States. To apply these tools to mineral systems-based exploration, the U.S. Geological Survey (USGS) has developed two products: (1) The USGS Geochron Database, and (2) the USGS Isotope Database. These databases provide centralized repositories of geo/thermochronological dates and data (Geochron Database) and both radiogenic and stable isotope data (Isotope Database) generated by the USGS and partners over the past decades. Integrating these datasets together and with traditional exploration approaches provides the mineral exploration community with powerful tools for determining the temporal and thermal histories of ore systems and identifying metallogenic source provinces.

Continental United States↗
USGS1981

Design of exploration and minerals-data-collection programs in developing areas

This paper considers the practical problem of applying economic analysis to designing minerals exploration and data collection strategies for developing countries. Formal decision rules for the design of government exploration and minerals-data-collection programs are derived by using a minerals-industry planning model that has been extended to include an exploration function. Rules derived are applicable to centrally planned minerals industries as well as market-oriented minerals sectors. They pertain to the spatial allocation of exploration effort and to the allocation of activities between government and private concerns for market-oriented economies. Programs characterized by uniform expenditures, uniform information coverage across regions, or uniform-density grid drilling progrmas are shown to be inferior to the strategy derived. Moreover, for market-oriented economies, the economically optimal mix in exploration activities between private and government data collection would require that only private firms assess local sites and that government agencies carry out regional surveys.

Socio-Economic Planning Sciences↗
USGS2000

Late-kinematic timing of orogenic gold deposits and significance for computer-based exploration techniques with emphasis on the Yilgarn Block, Western Australia

Orogenic gold deposits are a widespread coherent group of epigenetic ore deposits that are sited in accretionary or collisional orogens. They formed over a large crustal-depth range from deep-seated low-salinity H 2 O–CO 2 ±CH 4 ±N 2 ore fluids and with Au transported as thio-complexes. Regional structures provide the main control on deposit distribution. In many terranes, first-order faults or shear zones appear to have controlled regional fluid flow, with greatest ore-fluid fluxes in, and adjacent to, lower-order faults, shear zones and/or large folds. Highly competent and/or chemically reactive rocks are the most common hosts to the larger deposits. Focusing of supralithostatic ore fluids into dilatant zones appears to occur late during the evolutionary history of the host terranes, normally within D 3 or D 4 in a D 1 –D 4 deformation sequence. Reactivation of suitably oriented pre-existing structures during a change in far-field stress orientation is a factor common to many deposits, and repeated reactivation may account for multiple mineralization episodes in some larger deposits. Absolute robust ages of mineralization support their late-kinematic timing, and, in general, suggest that deposits formed diachronously towards the end of the 100 to 200 m.y. long evolutionary history of hosting orogens. For example, in the Yilgarn Block, a region specifically emphasised in this study, orogenic gold deposits formed in the time interval between 40 and 90 m.y., with most about 60 to 70 m.y., after the youngest widespread basic-ultrabasic volcanism and towards the end of felsic magmatism. The late timing of orogenic gold deposits is pivotal to geologically-based exploration methodologies. This is because the present structural geometries of: (i) the deposits, (ii) the hosting goldfields, and (iii) the enclosing terranes are all essentially similar to those during gold mineralization, at least in their relative position to each other. Thus, interpretation of geological maps and cross-sections and three-dimensional models can be used to accurately simulate the physical conditions that existed at the time of ore deposition. It is particularly significant that the deposits are commonly related to repetitive and predictable geometries, such as structural heterogeneities within or adjacent to first-order structures, around rigid granitoid bodies, or in specific “locked-up” fold-thrust structures. Importantly, the two giant greenstone-hosted goldfields, Kalgoorlie and Timmins, show a remarkably similar geometry at the regional scale. Computer-based stress mapping and GIS-based prospectivity mapping are two computer-based quantitative methodologies that can utilize and take advantage of the late timing aspect of this deposit type to provide important geological aids in exploration, both in broad regions and more localized goldfields. Both require an accurate and consistent solid geology map, stress mapping requires knowledge of the far-field stresses during mineralization, and the empirical prospectivity mapping requires data from a significant number of known deposits in the terrane. The Kalgoorlie Terrane, in the Yilgarn Block, meets these criteria, and illustrates the potential of these methodologies in the exploration for orogenic gold deposits. Low minimum stress anomalies, interpreted to represent dilational zones during gold-related deformation, coincide well with the positions of known goldfields rather than individual gold deposits in the terrane, and there are additional as-yet unexplained anomalies. The prospectivity analysis confirms that predictable and repetitive factors controlling the siting of deposits are: (i) proximity to, and orientation and curvature of, granitoid-greenstone contacts, (ii) proximity to segments of crustal faults which strike in a preferred direction, (iii) proximity to specific lithological contacts which have similar preferred strike, (iv) proximity to anticlinal structures, and (v) the presence of preferred reactive host rocks (e.g., dolerite). The prospectivity map defines a series of anomalous areas, which broadly conform to those of the stress map (>78% correspondence). The most prospective category on this map covers less than 0.3% of the greenstone belts and yet hosts 16% of the known deposits, which have produced>80% of known gold. Thus, it discriminates in favour of the larger economically more-attractive deposits in the terrane. The successful application of stress mapping and prospectivity mapping to geology-based exploration for orogenic gold deposits indicates that more quantitative analysis of geological map data is a profitable line of research. The computer-based nature of these methodologies is ideal for the production of an ultimate, integrated, deposit target map, which can be compared to other, more conventional, targeting parameters such as geophysical and geochemical anomalies. Such an integrated strategy appears the way forward in the increasingly difficult task of cost-effective global exploration for orogenic gold deposits in poorly exposed terranes.

Western Australia↗
USGS2020

Planetary cave exploration progresses

Planetary caves have been identified on the Moon and on Mars, and are likely to occur across the Solar System. They present a new frontier for planetary science, subsurface astrobiology, geology and human exploration. The fourth in a series of scientific meetings focusing on the science and exploration of planetary caves brought together 55 terrestrial and planetary scientists, robotics and instrumentation engineers, and students (16 including 1 undergraduate). Conference participants discussed the state of the art of relevant sciences and current engineering capabilities as applied to planetary cave exploration and research. Specifically, they considered cave formation mechanisms, preserved geological records, cave micro-climate and astrobiological potential, engineering challenges of subsurface exploration, and potential robotic mission concepts to explore the subsurface of other worlds, especially the Moon and Mars.

Eos, Earth and Space Science News↗
USGS2016

Historical files from Federal Government mineral exploration-assistance programs, 1950 to 1974

The Defense Minerals Administration (DMA), Defense Minerals Exploration Administration (DMEA), and Office of Minerals Exploration (OME) mineral exploration programs were active over the period 1950–1974. Under these programs, the Federal Government contributed financial assistance in the exploration for certain strategic and critical minerals. The information about a mining property that was collected under these programs was placed in files called dockets. A docket is a collection of material (application, contract, correspondence, maps, reports, results) about a property for which an individual applied for exploration assistance from the Federal Government. Information found in dockets describe where mineral deposits were examined, what was found, and whether it was mined. As such, they provide very useful information to private industry regarding potential and non-potential prospect areas, provide the U.S. Geological Survey with useful information on mineral occurrences that are used in national assessments for particular mineral deposits, and provide other U.S. Federal agencies (Bureau of Indian Affairs, Bureau of Land Management, and Environmental Protection Agency) information relevant to land management, permitting, and leasing.

Data Series↗
USGS2010

USGS exploration geochemistry studies at the Pebble porphyry Cu-Au-Mo deposit, Alaska— Pdf of presentation

From 2007 through 2010, scientists in the U.S. Geological Survey (USGS) have been conducting exploration-oriented geochemical and geophysical studies in the region surrounding the giant Pebble porphyry Cu-Au-Mo deposit in southwestern Alaska. The Cretaceous Pebble deposit is concealed under tundra, glacial till, and Tertiary cover rocks, and is undisturbed except for numerous exploration drill holes. These USGS studies are part of a nation-wide research project on evaluating and detecting concealed mineral resources. This report focuses on exploration geochemistry and comprises illustrations and associated notes that were presented as a case study in a workshop on this topic. The workshop, organized by L.G. Closs and R. Glanzman, is called 'Geochemistry in Mineral Exploration and Development,' presented by the Society of Economic Geologists at a technical conference entitled 'The Challenge of Finding New Mineral Resources: Global Metallogeny, Integrative Exploration and New Discoveries,' held at Keystone, Colorado, October 2-5, 2010.

Alaska↗
USGS1982

Geochemical orientation for mineral exploration in the Hashemite Kingdom of Jordan

This report is a supplement to previous accounts of geochemical exploration conducted in the Hashemite Kingdom of Jordan by the Natural Resources Authority of the Royal Government of Jordan and the U.S. Geological Survey. The field work on which this report is based was sponsored by the U.S. Agency for International Development, U.S. Department of State. Procedures used in collecting various kinds of rocks, ores, slags, eluvial and alluvial sediments, heavy-mineral concentrates, and organic materials for use as geochemical sample media are summarized, as are the laboratory procedures followed for the analysis of these sample materials by semiquantitative spectrographic, atomic absorption, fluorometric, and X-ray diffraction methods. Geochemical evaluations of the possibilities for economic mineral deposits in certain areas are presented. The results of these preliminary investigations open concepts for further use in geochemical exploration in the search for metallic mineral deposits in Jordan. Perhaps the most desirable new activity would be hydrogeochemical exploration for uranium and base metals, accompanied by interpretation of such remote-sensing data as results of airborne radiometric surveys and computer-enhanced LANDSAT imagery. For more conventional approaches to geochemical exploration, however, several fundamental problems regarding proper choice of geochemical sample media for different geologic and geographic parts of the Country must be solved before effective surveys can be made. The present results also show that such common geochemical exploration techniques as the determination of the trace-element contents of soils, plant ash, and slags have direct application also toward the resolution of several archaeological problems in Jordan. These include the relation of trace-elements chemistry of local soils to the composition of botanic remains, the trace-elements composition of slags to the technological development of the extractive metallurgy of copper and iron in the region, and the use of charcoal from slags for the C-14 dating of periods of archaeometallurgical activity. Less directly, interpretations based on the distribution in time and space of the archaeometallurgical activities of the region might add to the knowledge of early climatic conditions and vegetative cover of the area.

Open-File Report↗