Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Developments in Petrology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

The 1989-1990 eruptions of Redoubt Volcano: an introduction

Redoubt Volcano, located on the west side of Cook Inlet in south-central Alaska, erupted explosively on over 20 separate occasions between December 14, 1989 and April 21, 1990. Fourteen lava domes were emplaced in the summit area, thirteen of which were subsequently destroyed. The eruption caused economic losses estimated at over $160,000,000 making this the second most costly eruption in U.S. history. This economic impact provided the impetus for a integrated comprehensive account of an erupting volcano using both modern and classical research and modern techniques which in turn led to advances in eruption monitoring and interpretation. Research on such topics as dome formation and collapse and the resulting pyroclastic flows, elutriated ash, lightning, tephra, and flooding was blended with the rapid communication of associated hazards to a large user group. The seismology successes in predicting and monitoring eruption dynamics were due in part to (1) the recognition of long-period seismic events as indicators of the readiness of the volcano to erupt, and (2) to the development of new tools that allowed the seismicity to be assessed instantaneously. Integrated studies of the petrology of erupted products and volatile content over time gave clues as to the progress of the eruption towards completion.

Alaska↗

Calibration of the U.S. Geological Survey National Crustal Model

The U.S. Geological Survey National Crustal Model (NCM) is being developed to include spatially varying estimates of site response in seismic hazard assessments. Primary outputs of the NCM are continuous velocity and density profiles from the Earth’s surface to the mantle transition zone at 410-kilometer (km) depth for each location on a 1-km grid across the conterminous United States. Datasets used to produce the NCM may have a resolution of better than 1 km near the Earth’s surface in some regions, but, with increasing depth, NCM resolution decreases to tens to hundreds of kilometers in the mantle. Basic subsurface information is provided by the NCM geologic framework, thermal model, and petrologic and mineral physics database. In this report, the velocities and densities that can be extracted from the NCM are calibrated through the development of a porosity model based on Biot-Gassmann theory and more than 2,000 compressional- and (or) shear-wave velocity profiles less than 10 km deep from across the conterminous United States and southwestern Canada. Sediment and rock porosities are derived from shear-wave velocity and are found to depend on effective pressure, rock type, and age (for sedimentary and extrusive volcanic deposits). Porosity-effective pressure functions are then estimated for each rock type (and age for sedimentary and extrusive volcanic deposits). Unconsolidated sediments are found to have higher porosities than consolidated units, which have higher porosities than unweathered igneous units; young sedimentary units (for example, Quaternary age units) tend to have higher porosities than older sedimentary units (for example, pre-Cenozoic age units); porosity decreases with increasing effective pressure; and porosities can decrease quickly through the weathered layer of intrusive rocks. Comparing two Los Angeles area velocity models and the U.S. Geological Survey Bay Area velocity model with the NCM, the NCM does a better job on average of reproducing observed shear-wave velocities below 1 km per second because it has less bias and uncertainty. Approaching and above 1 km per second, the NCM tends to underpredict observed shear-wave velocity. Whereas several factors could contribute to this, the primary factor is probably bias in the NCM geologic framework. For example, the NCM will predict lower velocities in places where the depth to bedrock and basement appear shallower in the measured velocity profiles than specified in the NCM geologic framework. With regard to observed compressional-wave velocity and density, the NCM has significantly less bias than California models for the former, especially below 2 km per second, and all models tend to overpredict density for densities less than about 2,200 kilograms per cubic meter.

Open-File Report↗

Volcanoes of the Mojave: The 2022 Desert Symposium field trip road log

Basalt lava fields, some decorated with scoria ‘cinder’ cones, are scattered around the Mojave Desert. Most basalt fields are short-lived, but the Cima volcanic field is unique in having eruptions that span ~7.5 m.y., including the youngest eruption in the Mojave Desert at ~12 ka. Xenolith-bearing basalts that include both mantle and deep crustal rocks are known in several fields. All basalt fields except Cima are restricted to the active eastern California shear zone, and many lie directly on active faults, indicating a direct relation between faults and volcanism. The field trip will visit the Pisgah, Dish Hill, Amboy, Cima, and Bicycle Lake volcanic fields, and it will enable examination of the physical volcanology in the basalt fields, including the types of eruptions (effusive and explosive) and the resulting deposits (lava flows, scoria cones, and tuff cones). It will also review the petrology, paleomagnetism, remote sensing, and planetary geology studies conducted at each volcanic field, and how these studies influenced the development of each of these study areas.

California↗

Two lithospheric profiles across southern California derived from gravity and seismic data

We present two detailed 2-D density transects for the crust and uppermost mantle across southern California using a linear gravity inversion technique. This technique parameterizes the crust and upper mantle as a set of blocks that are based on published geologic and seismic models. Each block can have a range of densities that are constrained where possible by borehole measurements, seismic velocities, and petrologic data. To further constrain the models, it is assumed that the lithosphere is close to isostatic equilibrium at both ends of the profiles, in the deep ocean and east of the Mojave Desert. We calculate the lithostatic pressure variations field for the whole cross section to rule out the geophysically insignificant solutions. In the linear equation, ρ = a + bV ( V , seismic P-wave velocity; ρ , density), which approximates the mantle density–velocity ( ρ – V ) relationship, different coefficients for b were evaluated. Lower coefficients ( b < 0.2) correspond to an almost purely thermally perturbed mantle, while higher coefficients ( b > 0.3) imply that other effects, such as composition and/or metamorphic changes, play an important role in the mantle. Density models were constructed with the coefficient b ranging from 0 to 0.6. The results indicate that a high b value in the mantle ρ – V relationship is associated with less dense crust in the Mojave block and more dense crust in the Catalina schist block. In the less dense Mojave block, the average density of the whole crust is ∼2.75 g/cm 3 , while that of the lower crust is ∼2.72 g/cm 3 . These densities imply a high silica content in the crust, and a minor fraction of basic rock in the lower crust, or perhaps the absence of a basaltic layer altogether. By comparison, the average density of a typical continental stable platform is ∼2.85 g/cm 3 . Models with higher b coefficients (0.5–0.6) are characterized by a large isostatic imbalance. On the other hand, lower b values (0–0.2) require a consolidated whole crust density in the Mojave Desert of ∼2.78 g/cm 3 , and a lower crust density of ∼2.89 g/cm 3 with mostly basaltic composition. This contradicts the observed, lower V p / V s -ratio in the Mojave Desert associated with mostly felsic and low-density crust. Models with lower b coefficients (0.1–0.2) are characterized by an absence of local Airy compensation beneath the San Gabriel Mountains at the LARSE-1 profile. These, and other non-gravity arguments, suggest optimal solutions to the mantle ρ – V relation of b ∼ 0.2–0.4. This, in turn, means that both thermal and petrological effects occur inside the downwelling of the uppermost mantle high velocity body located beneath the Transverse Ranges. During the development of this mantle downwelling, the basaltic layer of the Mojave block was likely eroded and pulled down into the high velocity body. Those basaltic fragments may have been transformed into eclogites, and this metamorphic change implies a higher b -coefficient density–velocity relationship than would be expected for a purely thermal process.

California↗

The petrographic microscope: Evolution of a mineralogical research instrument

The petrographic microscope, designed to observe and measure the optical properties of minerals as a means of identifying them, has provided a foundation for mineralogical and petrological research for more than 120 years. Much of what is known today in these fields is attributable to this instrument, the development of which paralleled an evolution of fundamental optical theory and its correlation with mineral structure and composition. This instrument and its related accessories have evolved through a range of models and designs, which are in themselves distinctive for their scientific function and elegant construction, and are today prized by collectors of scientific instruments.

Mineralogical Record↗

Influence of particle and surface quality on the vitrinite reflectance of dispersed organic matter: Comparative exercise using data from the qualifying system for reflectance analysis working group of ICCP

The development of a qualifying system for reflectance analysis has been the scope of a working group within the International Committee for Coal and Organic Petrology (ICCP) since 1999, when J. Koch presented a system to qualify vitrinite particles according to their size, proximity to bright components and homogeneity of the surface. After some years of work aimed at improving the classification system using photomicrographs, it was decided to run a round robin exercise on microscopy samples. The classification system tested consists of three qualifiers ranging from excellent to low quality vitrinites with an additional option for unsuitable vitrinites. This paper reports on the results obtained by 22 analysts who were asked to measure random reflectance readings on vitrinite particles assigning to each reading a qualifier. Four samples containing different organic matter types and a variety of vitrinite occurrences have been analysed. Results indicated that the reflectance of particles classified as excellent, good or poor compared to the total average reflectance did not show trends to be systematically lower or higher for the four samples analysed. The differences in reflectance between the qualifiers for any given sample were lower than the scatter of vitrinite reflectance among participants. Overall, satisfactory results were obtained in determining the reflectance of vitrinite in the four samples analysed. This was so for samples having abundant and easy to identify vitrinites (higher plant-derived organic matter) as well as for samples with scarce and difficult to identify particles (samples with dominant marine-derived organic matter). The highest discrepancies were found for the organic-rich oil shales where the selection of the vitrinite population to measure proved to be particularly difficult. Special instructions should be provided for the analysis of this sort of samples. The certainty of identification of the vitrinite associated with the vitrinite reflectance values reported has been assessed through a reliability index which takes into account the number of readings and the coefficient of variation. The same statistical approach as that followed in the ICCP vitrinite reflectance accreditation program for single seam coals has been used for data evaluation. The results indicated low to medium dispersion for 17 out of 22 participants. This, combined with data from other sets of comparative analyses over a long period, is considered an encouraging result for the establishment of an accreditation program on vitrinite reflectance measurements in dispersed organic matter. ?? 2006 ICCP.

International Journal of Coal Geology↗

Central San Juan caldera cluster: Regional volcanic framework

Eruption of at least 8800 km 3 of dacitic-rhyolitic magma as 9 major ash-slow sheets (individually 150-5000 km 3 ) was accompanied by recurrent caldera subsidence between 28.3 and about 26.5 Ma in the central San Juan Mountains, Colorado. Voluminous andesitic-decitic lavas and breccias were erupted from central volcanoes prior to the ash-flow eruptions, and similar lava eruptions continued within and adjacent to the calderas during the period of explosive volcanism, making the central San Juan caldera cluster an exceptional site for study of caldera-related volcanic processes. Exposed calderas vary in size from 10 to 75 km in maximum diameter, the largest calderas being associated with the most voluminous eruptions. After collapse of the giant La Garita caldera during eruption if the Fish Canyon Tuff at 17.6 Ma, seven additional explosive eruptions and calderas formed inside the La Garita depression within about 1 m.y. Because of the nested geometry, maximum loci of recurrently overlapping collapse events are inferred to have subsided as much as 10-17 km, far deeper than the roof of the composite subvolcanic batholith defined by gravity data, which represents solidified caldera-related magma bodies. Erosional dissection to depths of as much as 1.5 km, although insufficient to reach the subvolcanic batholith, has exposed diverse features of intracaldera ash-flow tuff and interleaved caldera-collapse landslide deposits that accumulated to multikilometer thickness within concurrently subsiding caldera structures. The calderas display a variety of postcollapse resurgent uplift structures, and caldera-forming events produced complex fault geometries that localized late mineralization, including the epithermal base- and precious-metal veins of the well-known Creede mining district. Most of the central San Juan calderas have been deeply eroded, and their identification is dependent on detailed geologic mapping. In contrast, the primary volcanic morphology of the symmetrically resurgent Creede caldera, the volcanic framework for Lake Creede, has been exceptionally preserved because of rapid infilling by moat sediments of the Creede Formation, which were preferentially eroded during the past few million years. The ash-flow tuffs and caldera of the central San Juan region have been widely recognized as exceptional sites for study of explosive volcanic processes, and the results reported here provide new insights into processes of pyroclastic eruption and emplacement, geometric interrelations between caldera subsidence and resurgence, the petrologic diversity of sequential ash-flow eruptions, recurrent eruption of intermediate-composition lavas after each caldera-forming event, associated regional fault development, volume relations between ash-flow eruptions and associated calderas, the emplacement of subvolcanic batholiths, and involvement of mantle-derived mafic phases in magma-generation processes.

Colorado↗

Petrology and petrography for USGS test wells 1, 2, and 3 in the Madison Limestone in Montana and Wyoming

The need for large quantities of energy has created interest in the Fort Union coal region of the Northern Great Plains. Extensive development of this coal, which may include on-site steam-power generation, gasification, liquefaction, and slurry-pipeline transport of the coal out of the region, would place a heavy demand on the region's limited streamflow. Paleozoic rocks that underlie the Fort Union coal region might supply, at least on a temporary basis, a significant part of the water required for coal development. Paleozoic rocks in the Northern Great Plains are related to the geologic history of the western border of the stable interior of the continent. The central part of the continental interior (Paleozoic craton) was made up of a stable core, the Canadian shield. To the west of the Canadian shield, the broad western flank of the Paleozoic craton made up the Cordilleran shelf, which is the site of the shallow-water marine rocks described in this report. The area of study covers approximately 200,000 square miles, and includes eastern Montana, western North Dakota and South Dakota, northeastern Wyoming, and northwestern Nebraska. The Madison Limestone, or Group, where it is divided, consists of a lower argillaceous limestone (Lodgepole Limestone); a middle unit of fossiliferous carbonate rock (Mission Canyon Limestone); and an upper unit of anhydrite, halite, and interbedded carbonate rock and shale (Charles Formation). The total section is made up of numerous cyclic, marker-defined units. The Madison Limestone was subdivided into units bounded by "marker beds" that consist of thin and widespread shaly carbonate or dark shale recognizable in the subsurface on geophysical logs. The five marker beds used for regional correlation purposes are as follows: M-1 represents the base of the Madison Limestone; M-3 is near the Kinderhookian-Osagean boundary; M-7 and M-8.5 fall within the Osagean; and M-12 is near the Osagean-Meramecian boundary. The top of the Madison Limestone is the Mc marker. Petrology and petrography of the Madison Limestone and associated rocks were studied from cores taken in three test wells of the U.S. Geological Survey. Six major rock types are recognized within cored intervals of the three test wells. Dolomite forms two-thirds of the total and limestone about 20 percent. The remainder consists of anhydrite, carbonate breccia, carbonate mudstone, and chert. Crystalline dolomite is the only abundant rock type in wells 1, 2, and 3 that has high enough porosity and permeability to provide significant yields of water. Crystalline dolomites not associated with evaporites may have formed by some sort of meteoric water-sea water mixing process in the subsurface shoreline environment by recrystallization of mud-rich limestones. Porosity and permeability values of all cored intervals of the Madison Limestone were determined. Mean porosity for the Madison Limestone is 8.4 percent, and mean permeability is 15.8 millidarcies. Because the Madison Limestone is relatively heterogeneous, permeability has a wide range in value.

Montana, Wyoming↗

The onset of metamorphism in ordinary and carbonaceous chondrites

Ordinary and carbonaceous chondrites of the lowest petrologic types were surveyed by X-ray mapping techniques. A variety of metamorphic effects were noted and subjected to detailed analysis using electron microprobe, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and cathodoluminescence (CL) methods. The distribution of Cr in FeO-rich olivine systematically changes as metamorphism increases between type 3.0 and type 3.2. Igneous zoning patterns are replaced by complex ones and Cr-rich coatings develop on all grains. Cr distributions in olivine are controlled by the exsolution of a Cr-rich phase, probably chromite. Cr in olivine may have been partly present as tetrahedrally coordinated Cr 3+ . Separation of chromite is nearly complete by petrologic type 3.2. The abundance of chondrules showing an inhomogeneous distribution of alkalis in mesostasis also increases with petrologic type. TEM shows this to be the result of crystallization of albite. Residual glass compositions systematically change during metamorphism, becoming increasingly rich in K. Glass in type I chondrules also gains alkalis during metamorphism. Both types of chondrules were open to an exchange of alkalis with opaque matrix and other chondrules. The matrix in the least metamorphosed chondrites is rich in S and Na. The S is lost from the matrix at the earliest stages of metamorphism due to coalescence of minute grains. Progressive heating also results in the loss of sulfides from chondrule rims and increases sulfide abundances in coarse matrix assemblages as well as inside chondrules. Alkalis initially leave the matrix and enter chondrules during early metamorphism. Feldspar subsequently nucleates in the matrix and Na re-enters from chondrules. These metamorphic trends can be used to refine classification schemes for chondrites. Cr distributions in olivine are a highly effective tool for assigning petrologic types to the most primitive meteorites and can be used to subdivide types 3.0 and 3.1 into types 3.00 through 3.15. On this basis, the most primitive ordinary chondrite known is Semarkona, although even this meteorite has experienced a small amount of metamorphism. Allan Hills (ALH) A77307 is the least metamorphosed CO chondrite and shares many properties with the ungrouped carbonaceous chondrite Acfer 094. Analytical problems are significant for glasses in type II chondrules, as Na is easily lost during microprobe analysis. As a result, existing schemes for chondrule classification that are based on the alkali content of glasses need to be revised.

Meteoritics and Planetary Science↗

The Hawaiian Volcano Observatory: A natural laboratory for studying basaltic volcanism

In the beginning of the 20th century, geologist Thomas A. Jaggar, Jr., argued that, to fully understand volcanic and associated hazards, the expeditionary mode of studying eruptions only after they occurred was inadequate. Instead, he fervently advocated the use of permanent observatories to record and measure volcanic phenomena&mdash;at and below the surface&mdash;before, during, and after eruptions to obtain the basic scientific information needed to protect people and property from volcanic hazards. With the crucial early help of American volcanologist Frank Alvord Perret and the Hawaiian business community, the Hawaiian Volcano Observatory (HVO) was established in 1912, and Jaggar&rsquo;s vision became reality. From its inception, HVO&rsquo;s mission has centered on several goals: (1) measuring and documenting the seismic, eruptive, and geodetic processes of active Hawaiian volcanoes (principally Kīlauea and Mauna Loa); (2) geological mapping and dating of deposits to reconstruct volcanic histories, understand island evolution, and determine eruptive frequencies and volcanic hazards; (3) systematically collecting eruptive products, including gases, for laboratory analysis; and (4) widely disseminating observatory-acquired data and analysis, reports, and hazard warnings to the global scientific community, emergency-management authorities, news media, and the public. The long-term focus on these goals by HVO scientists, in collaboration with investigators from many other organizations, continues to fulfill Jaggar&rsquo;s career-long vision of reducing risks from volcanic and earthquake hazards across the globe. This chapter summarizes HVO&rsquo;s history and some of the scientific achievements made possible by this permanent observatory over the past century as it grew from a small wooden structure with only a small staff and few instruments to a modern, well-staffed, world-class facility with state-of-the-art monitoring networks that constantly track volcanic and earthquake activity. The many successes of HVO, from improving basic knowledge about basaltic volcanism to providing hands-on experience and training for hundreds of scientists and students and serving as the testing ground for new instruments and technologies, stem directly from the acquisition, integration, and analysis of multiple datasets that span many decades of observations of frequent eruptive activity. HVO&rsquo;s history of the compilation, interpretation, and communication of long-term volcano monitoring and eruption data (for instance, seismic, geodetic, and petrologic-geochemical data and detailed eruption chronologies) is perhaps unparalleled in the world community of volcano observatories. The discussion and conclusions drawn in this chapter, which emphasize developments since the 75th anniversary of HVO in 1987, are general and retrospective and are intended to provide context for the more detailed, topically focused chapters of this volume.

Hawaii↗

Updates to and applications of the USGS National Crustal Model for seismic hazard studies

The U.S. Geological Survey (USGS) National Crustal Model (NCM) is being developed to assist in the modeling of seismic hazards across the conterminous United States. The NCM is composed of a grid of geophysical profiles, extending from the Earth’s surface into the upper mantle. It is constructed from a 3D geologic framework and geophysical rules defined by: (1) a petrologic and mineral physics database; (2) a 3D temperature model; and (3) a calibrated rock type- and age-dependent porosity model. Parameters needed to estimate site response for existing ground motion models (GMMs), including the time-averaged velocity in the upper 30 meters ( V S 30 ) and the depths to 1.0 and 2.5 km/s shear-wave velocity ( Z 1.0 and Z 2.5 ), can be extracted from the NCM. As GMMs develop, other metrics could also be extracted or derived from the NCM such as sediment thickness and travel times, fundamental frequency, a fully frequency-dependent site response function, or 3D geophysical volumes for wavefield simulations. Application of the NCM may also benefit other aspects of seismic hazard analysis including better accounting for path-dependent attenuation and geometric spreading, more accurate estimation of earthquake source properties such as hypocentral location and stress drop, and calculation of crustal strength profiles that inform estimates of the base of seismicity.

Conference Paper↗

The USGS National crustal model for seismic hazard studies: 2019 update

The United States Geological Survey (USGS) National Crustal Model (NCM) is being developed to assist in the modeling of seismic hazards across the conterminous United States, specifically by improving estimates of site response. The NCM is composed of geophysical profiles, extending from the Earth’s surface into the upper mantle, constructed from 5 primary elements: 1) depth to bedrock and basement; 2) 3D geologic framework; 3) petrologic and mineral physics database; 4) 3D temperature model; and 5) calibration of a porosity and attenuation model. Parameters needed to estimate site response for existing ground motion models (GMMs), including the time-averaged velocity in the upper 30 meters (VS30) and the depths to 1.0 and 2.5 km/s shear-wave velocity (Z1.0 and Z2.5), can be extracted from the NCM. As GMMs develop, other metrics could also be extracted or derived from the NCM such as fundamental frequency, a fully frequency-dependent site response function, or 3D geophysical volumes for wavefield simulations. Application of the NCM may also benefit other aspects of seismic hazard analysis including better accounting for path-dependent attenuation and geometric spreading and more accurate estimation of earthquake source properties such as hypocentral location and stress drop.

Conference Paper↗

Geology of kilauea volcano

This paper summarizes studies of the structure, stratigraphy, petrology, drill holes, eruption frequency, and volcanic and seismic hazards of Kilauea volcano. All the volcano is discussed, but the focus is on its lower cast rift zone (LERZ) because active exploration for geothermal energy is concentrated in that area. Kilauea probably has several separate hydrothermal-convection systems that develop in response to the dynamic behavior of the volcano and the influx of abundant meteoric water. Important features of some of these hydrothermal-convection systems are known through studies of surface geology and drill holes. Observations of eruptions during the past two centuries, detailed geologic mapping, radiocarbon dating, and paleomagnetic secular-variation studies indicate that Kilauea has erupted frequently from its summit and two radial rift zones during Quaternary time. Petrologic studies have established that Kilauea erupts only tholeiitic basalt. Extensive ash deposits at Kilauea's summit and on its LERZ record locally violent, but temporary, disruptions of local hydrothermal-convection systems during the interaction of water or steam with magma. Recent drill holes on the LERZ provide data on the temperatures of the hydrothermal-convection systems, intensity of dike intrusion, porosity and permeability, and an increasing amount of hydrothermal alteration with depth. The prehistoric and historic record of volcanic and seismic activity indicates that magma will continue to be supplied to deep and shallow reservoirs beneath Kilauea's summit and rift zones and that the volcano will be affected by eruptions and earthquakes for many thousands of years. ?? 1993.

Geothermics↗

Review of lignite resources of western Tennessee and the Jackson Purchase area, western Kentucky

Introduction: This review of the lignite deposits of western Tennessee and the Jackson Purchase area in western Kentucky (Fig. 1) is a preliminary report on part of the U.S. Geological Survey's National Coal Resource Assessment of the Gulf Coastal Plain Coal Province. Lignite deposits of western Kentucky and Tennessee are an extension of the Gulf Coastal Plain Coal Province (Cushing and others, 1964), and currently are not economic to mine. These deposits have not been extensively investigated or developed as an energy resource. This review includes a description of the geology of the lignite-bearing units, a discussion of the available coal quality data, and information on organic petrology. Palynological data for lignite samples collected in Kentucky and Tennessee as part of this work are presented in an Appendix.

Open-File Report↗

A review of lignite resources of western Tennessee and the Jackson Purchase area, western Kentucky

This review of the lignite deposits of western Tennessee and the Jackson Purchase area in western Kentucky (Figure 1) is an updated report on part of the U.S. Geological Survey's National Coal Resource Assessment of the Gulf Coastal Plain Coal Province (see Ruppert et al., 2002; Hackley et al., 2006; Dennen, 2009; and other chapters of this publication). Lignite deposits of western Kentucky and Tennessee are an extension of the Gulf Coastal Plain Coal Province (Cushing et al., 1964), and currently are not economic to mine. These deposits have not been extensively investigated or developed as an energy resource. This review includes a description of the geology of the lignite-bearing units, a discussion of the available coal quality data, and information on organic petrology. Palynological data for lignite samples collected in Kentucky and Tennessee as part of this work are presented in Table 1. Lignite trace element data originally presented in Hackley et al. (2006) are not included in this report due to potential laboratory quality control issues during the time the samples were analyzed (U.S. Geological Survey Energy Resources Program, 2010).

Kentucky, Tennessee↗

Stable isotope systematics in mesozoic granites of Central and Northern California and Southwestern Oregon

18O, D, and H2O+ contents were measured for whole-rock specimens of granitoid rocks from 131 localitics in California and southwestern Oregon. With 41 new determinations in the Klamath Mountains and Sierra Nevada, initial strontium isotope ratios are known for 104 of these samples. Large variations in ??18O (5.5 to 12.4), ??D (-130 to -31), water contents (0.14 to 2.23 weight percent) and initial strontium isotope ratios (0.7028 to 0.7095) suggest a variety of source materials and identify rocks modified by secondary processes. Regular patterns of variation in each isotopic ratio exist over large geographical regions, but correlations between the ratios are generally absent except in restricted areas. For example, the regular decrease in ??D values from west to east in the Sierra Nevada batholith is not correlative with a quite complex pattern of ??18O values, implying that different processes were responsible for the isotopic variations in these two elements. In marked contrast to a good correlation between (87Sr/86Sr)o and ??18O observed in the Peninsular Ranges batholith to the south, such correlations are lacking except in a few areas. ??D values, on the other hand, correlate well with rock types, chemistry, and (87Sr/86Sr)o except in the Coast Ranges where few of the isotopic signatures are primary. The uniformly low ??D values of samples from the Mojave Desert indicate that meteoric water contributed much of the hydrogen to the rocks in that area. Even so, the ??18O values and 18O fractionations between quartz and feldspar are normal in these same rocks. This reconnaissance study has identified regularities in geochemical parameters over enormous geographical regions. These patterns are not well understood but merit more detailed examination because they contain information critical to our understanding of the development of granitoid batholiths. ?? 1981 Springer-Verlag.

Contributions to Mineralogy and Petrology↗

Reconnaissance geology of the Jabal Saq Quadrangle, sheet 26/43 C, Kingdom of Saudi Arabia

The Jabal Saq quadrangle is located in the northeastern part of the Arabian Shield at the northern end of the Najd region between lat 26?00' and 26?30' N. and long 43?00' and 43?30' E. The northeastern two-thirds of the quadrangle is underlain by Paleozoic sedimentary rocks, the southwestern one-third by Proterozoic metamorphic and igneous rocks. The oldest rocks in the quadrangle are weakly metamorphosed immature sandstones that may correlate with the Murdama group. They have been intruded by several large plutons ranging in composition from mafic granodiorite to syenogranite. A densely developed fracture cleavage cuts the metamorphic rocks; otherwise, no structural features were recorded. The quadrangle has low mineral potential; no ancient mines were identified. The Dharaymeeah syenogranite forms a large pluton and bears some petrologic resemblance to alkali granites identified elsewhere in the Arabian Shield that have documented potential for containing deposits of lithophile rare metals. Analyses of wadi sediment samples collected in the quadrangle suggest that the syenogranite may also be enriched in some of these elements. The anomalously radioactive Usba monzogranite resembles highly evolved peraluminous granite plutons that elsewhere in the world are associated with deposits of tin and tungsten.

Open-File Report↗

Petrologic and experimental evidence for the etching of garnets by organic acids in the upper Jurassic Morrision Formation, northwestern New Mexico

The upper Jurassic Morrison Formation in the southern part of the San Juan Basin contains uniquely etched detrital garnets characterized by smooth, crystallographically controlled faceted surfaces. The etched garnets occur in relatively homogeneous Morrison sandstones in discrete stratigraphic zones that are bounded above and below by sandstones bearing unetched garnets. Diagenetic alterations associated with etched garnets include etched staurolite, skeletal plagioclase, regularly interstratified illite-smectite, iron-rich chlorite, ankerite, albite, diagenetically altered (organic-poor) uranium ore, and extensive secondary porosity. Etching of garnets and partial to complete dissolution of other aluminosilicate minerals were caused by high concentrations of organic acids generated during the maturation of epigenetic organic matter (predominantly type-III kerogen) in the Morrison Formation. The presence of authigenic phases that form near 100 degrees C indicates that temperatures were high enough during diagenesis to cause the thermal degradation of kerogen. The subsequent release of reactive organic acids promoted a variety of water-rock reactions. This hypothesis was corroborated by experiments in which dicarboxylic acid solutions created facets on garnets identical to those developed on naturally etched Morrison garnets. The excellent complexing ability of organic acid anions accounts for the characteristic lack of alteration products on etched surfaces.

Journal of Sedimentary Petrology↗