Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Water Science and Application”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources
USGS2000

A log-normal distribution model for the molecular weight of aquatic fulvic acids

The molecular weight of humic substances influences their proton and metal binding, organic pollutant partitioning, adsorption onto minerals and activated carbon, and behavior during water treatment. We propose a lognormal model for the molecular weight distribution in aquatic fulvic acids to provide a conceptual framework for studying these size effects. The normal curve mean and standard deviation are readily calculated from measured M(n) and M(w) and vary from 2.7 to 3 for the means and from 0.28 to 0.37 for the standard deviations for typical aquatic fulvic acids. The model is consistent with several types of molecular weight data, including the shapes of high- pressure size-exclusion chromatography (HP-SEC) peaks. Applications of the model to electrostatic interactions, pollutant solubilization, and adsorption are explored in illustrative calculations.The molecular weight of humic substances influences their proton and metal binding, organic pollutant partitioning, adsorption onto minerals and activated carbon, and behavior during water treatment. We propose a log-normal model for the molecular weight distribution in aquatic fulvic acids to provide a conceptual framework for studying these size effects. The normal curve mean and standard deviation are readily calculated from measured Mn and Mw and vary from 2.7 to 3 for the means and from 0.28 to 0.37 for the standard deviations for typical aquatic fulvic acids. The model is consistent with several type's of molecular weight data, including the shapes of high-pressure size-exclusion chromatography (HP-SEC) peaks. Applications of the model to electrostatic interactions, pollutant solubilization, and adsorption are explored in illustrative calculations.

Environmental Science & Technology↗
USGS2024

Environmental drivers and spatial patterns of antibiotic-resistant, enteric coliforms across a forest–urban riverscape

Antibiotic resistant bacteria are prevalent environmental contaminants in freshwaters, and antibiotic resistance genes circulate throughout the urban water cycle. The increase of antibiotic resistant pathogens threatens public health through direct and indirect exposure, and natural resource managers need information on the spatial patterns of antibiotic resistant bacteria and environmental factors associated with their distribution to improve water quality monitoring and to better assess human, animal, and environmental health risks. We collected water and epilithic biofilm samples and measured physicochemical environmental variables at 29 sites distributed longitudinally in the Green-Duwamish River basin, Washington, USA. We characterized catchment-wide patterns of gram-negative fecal indicator bacteria and hypothesized that the presence of antibiotic resistance would be associated with environmental heterogeneity, bacterial primary ecology, stream compartment, and stream type. Antibiotic resistance was determined by microbial growth on selective media supplemented with 3 different antibiotics (ampicillin, chloramphenicol, or tetracycline). Phenotypic antibiotic resistance was positively associated with disturbance, but resistance to at least 1 antibiotic was also detected in undeveloped river segments, with an 83% overall detection rate (i.e., 24 out of 29 sites, 17 in the mainstem and 7 in tributaries). The most probable number of Escherichia coli was associated with higher levels of antibiotic resistance of non- E. coli coliforms across the basin (ρ = 0.38, p < 0.01) but was not associated with antibiotic resistance of E. coli . Phenotypic resistance was highest among non- E. coli coliforms in the water column of tributaries draining moderately to extensively developed subcatchments. Generalized linear mixed-effects model results showed that 18% of the variance in presence of antibiotic resistance was explained by the fixed effects (summed CV across environmental variables, stream type, primary ecology, and stream compartment), and when a spatial random effect was included, the model explained 27% of the variance. Our study provides new evidence that environmental factors and bacterial primary ecology are important underlying factors associated with spatial patterns of antibiotic resistant enteric coliforms. We used macroecological concepts and a riverscape approach to characterize the distribution of antibiotic resistance with methods applicable to municipalities.

Freshwater Science↗
USGS2015

Application of a microfluidic quantitative polymerase chain reaction technique to monitor bacterial pathogens in beach water and complex environmental matrices

Microfluidic quantitative polymerase chain reaction (MFQPCR) and conventional quantitative polymerase chain reaction methods were compared side by side in detecting and quantifying 19 genetic markers associated with Escherichia coli and select bacterial pathogens in algae, beach sand, and water from Lake Michigan. Enteropathogenic E. coli (EPEC), Shiga toxin-producing E. coli , Salmonella spp., Campylobacter jejuni , and Clostridium perfringens were among the pathogens tested. Of the pathogenic markers, eaeA that encodes intimin in EPEC was detected in all sample types: water (5%), detached/floating algae (42%), exposed/stranded algae (43%), sand below exposed algae (27%), and nearshore sand with no algae (22%). Other pathogenic markers, however, were detected sporadically. Despite comparable results from the two methods for the genetic markers tested in this study, the MFQPCR method may be superior, with the advantage of detecting and quantifying multiple pathogens simultaneously in environmental matrices.

Indiana↗
USGS2016

Detection of hepatitis E virus and other livestock-related pathogens in Iowa streams

Manure application is a source of pathogens to the environment. Through overland runoff and tile drainage, zoonotic pathogens can contaminate surface water and streambed sediment and could affect both wildlife and human health. This study examined the environmental occurrence of gene markers for livestock-related bacterial, protozoan, and viral pathogens and antibiotic resistance in surface waters within the South Fork Iowa River basin before and after periods of swine manure application on agricultural land. Increased concentrations of indicator bacteria after manure application exceeding Iowa's state bacteria water quality standards suggest that swine manure contributes to diminished water quality and may pose a risk to human health. Additionally, the occurrence of HEV and numerous bacterial pathogen genes for Escherichia coli , Enterococcus spp., Salmonella sp., and Staphylococcus aureus in both manure samples and in corresponding surface water following periods of manure application suggests a potential role for swine in the spreading of zoonotic pathogens to the surrounding environment. During this study, several zoonotic pathogens were detected including Shiga-toxin producing E. coli , Campylobacter jejuni , pathogenic enterococci, and S. aureus ; all of which can pose mild to serious health risks to swine, humans, and other wildlife. This research provides the foundational understanding required for future assessment of the risk to environmental health from livestock-related zoonotic pathogen exposures in this region. This information could also be important for maintaining swine herd biosecurity and protecting the health of wildlife near swine facilities.

Iowa↗
USGS2025

Effects of flow on pesticides in water and zooplankton in the northern Sacramento-San Joaquin Delta

Zooplankton are a key food source for juvenile fishes in estuaries worldwide, including California’s Sacramento–San Joaquin Delta (hereafter Delta); both zooplankton quality and quantity are critical to ecosystem health. Zooplankton may be affected by pesticides in water and the food web, and the Delta is known to contain complex pesticide mixtures. In this study, we evaluated pesticide concentrations in water and zooplankton in the northern Delta during (1) the summer–fall of 2017, 2018, and 2019, which included periods of augmented pulse flows from agriculture tailwater, and (2) across a full seasonal cycle from May 2019 to March 2020. We quantified changes in pesticide concentration in response to environmental factors. We found that zooplankton showed more frequent detections of hydrophobic pesticides compared to more frequent detections of hydrophilic compounds in water. Pesticide concentrations were influenced by flow, pesticide application, and season, but the effects of these environmental factors differed by habitat (Sacramento River or Yolo Bypass Toe Drain). Pesticides in water responded similarly to environmental factors in the Sacramento River and Yolo Bypass, whereas pesticides in zooplankton responded differently. In water, we found more detections and higher concentrations at higher flows in the Yolo Bypass and Sacramento River, but responses to pesticide application varied by habitat. Alternatively, pesticide concentrations in zooplankton increased in the Yolo Bypass with increasing flow (correlated with flow pulses) and changed seasonally; whereas, pesticide concentrations in zooplankton in the Sacramento River decreased at higher flows, and decreased with or did not respond to higher pesticide application in the watershed. Our study suggests that augmented flows—particularly those using agricultural tailwater—may have unintended negative ecological effects that could partially offset benefits to the food web and fishes in the northern Delta, underscoring the complex interplay among factors that drive increased pesticide exposure.

California↗
USGS2008

Response in the water quality of the Salton Sea, California, to changes in phosphorus loading: An empirical modeling approach

Salton Sea, California, like many other lakes, has become eutrophic because of excessive nutrient loading, primarily phosphorus (P). A Total Maximum Daily Load (TMDL) is being prepared for P to reduce the input of P to the Sea. In order to better understand how P-load reductions should affect the average annual water quality of this terminal saline lake, three different eutrophication programs (BATHTUB, WiLMS, and the Seepage Lake Model) were applied. After verifying that specific empirical models within these programs were applicable to this saline lake, each model was calibrated using water-quality and nutrient-loading data for 1999 and then used to simulate the effects of specific P-load reductions. Model simulations indicate that a 50% decrease in external P loading would decrease near-surface total phosphorus concentrations (TP) by 25-50%. Application of other empirical models demonstrated that this decrease in loading should decrease near-surface chlorophyll a concentrations (Chl a) by 17-63% and increase Secchi depths (SD) by 38-97%. The wide range in estimated responses in Chl a and SD were primarily caused by uncertainty in how non-algal turbidity would respond to P-load reductions. If only the models most applicable to the Salton Sea are considered, a 70-90% P-load reduction is required for the Sea to be classified as moderately eutrophic (trophic state index of 55). These models simulate steady-state conditions in the Sea; therefore, it is difficult to ascertain how long it would take for the simulated changes to occur after load reductions. ?? 2008 Springer Science+Business Media B.V.

Hydrobiologia↗
USGS1981

Role of numerical simulation in analysis of ground-water quality problems

The increasing public awareness and concern about the hazards of toxic chemicals contaminating aquifers has created an increased need for predictive capabilities to analyze ground-water contamination problems. Several digital models to simulate the movement and concentration of ground-water contaminants have been documented recently. Most simulate the transport and dispersion of a nonreactive solute, but some include mathematically simple reaction terms to represent decay and sorption processes. For applications to field problems, these solute-transport models impose data requirements that, in general, exceed our practical capabilities to accurately describe the field properties and stresses of the hydraulic and chemical systems. Thus, interpretations based on model analyses must recognize the significance of uncertainties in input data. Models of ground-water systems should be regarded as just one tool among many that can be used in the analysis of a ground-water quality problem. Numerical simulation can help the analyst integrate available data, evaluate conceptual models, test hypotheses pertaining to flow and quality changes, and predict system responses to alternative stresses. The models do not replace field data, but they do offer a feedback mechanism that can help to guide the design of a more effective and more efficient data-collection program.

Science of the Total Environment↗
USGS2009

Atmospheric correction at AERONET locations: A new science and validation data set

This paper describes an Aerosol Robotic Network (AERONET)-based Surface Reflectance Validation Network (ASRVN) and its data set of spectral surface bidirectional reflectance and albedo based on Moderate Resolution Imaging Spectroradiometer (MODIS) TERRA and AQUA data. The ASRVN is an operational data collection and processing system. It receives 50 ?? 50 km 2 ; subsets of MODIS level 1B (L1B) data from MODIS adaptive processing system and AERONET aerosol and water-vapor information. Then, it performs an atmospheric correction (AC) for about 100 AERONET sites based on accurate radiative-transfer theory with complex quality control of the input data. The ASRVN processing software consists of an L1B data gridding algorithm, a new cloud-mask (CM) algorithm based on a time-series analysis, and an AC algorithm using ancillary AERONET aerosol and water-vapor data. The AC is achieved by fitting the MODIS top-of-atmosphere measurements, accumulated for a 16-day interval, with theoretical reflectance parameterized in terms of the coefficients of the Li SparseRoss Thick (LSRT) model of the bidirectional reflectance factor (BRF). The ASRVN takes several steps to ensure high quality of results: 1) the filtering of opaque clouds by a CM algorithm; 2) the development of an aerosol filter to filter residual semitransparent and subpixel clouds, as well as cases with high inhomogeneity of aerosols in the processing area; 3) imposing the requirement of the consistency of the new solution with previously retrieved BRF and albedo; 4) rapid adjustment of the 16-day retrieval to the surface changes using the last day of measurements; and 5) development of a seasonal backup spectral BRF database to increase data coverage. The ASRVN provides a gapless or near-gapless coverage for the processing area. The gaps, caused by clouds, are filled most naturally with the latest solution for a given pixel. The ASRVN products include three parameters of the LSRT model (kL, kG, and kV), surface albedo, normalized BRF (computed for a standard viewing geometry, VZA = 0, SZA = 45??), and instantaneous BRF (or one-angle BRF value derived from the last day of MODIS measurement for specific viewing geometry) for the MODIS 500-m bands 17. The results are produced daily at a resolution of 1 km in gridded format. We also provide a cloud mask, a quality flag, and a browse bitmap image. The ASRVN data set, including 6 years of MODIS TERRA and 1.5 years of MODIS AQUA data, is available now as a standard MODIS product (MODASRVN) which can be accessed through the Level 1 and Atmosphere Archive and Distribution System website ( http://ladsweb.nascom.nasa.gov/data/search.html). It can be used for a wide range of applications including validation analysis and science research. ?? 2006 IEEE.

IEEE Transactions on Geoscience and Remote Sensing↗
USGS2013

Satellite images of the September 2013 flood event in Lyons, Colorado

The U.S. Geological Survey (USGS) Special Applications Science Center (SASC) produced an image base map showing high-resolution remotely sensed data over Lyons, Colorado—a city that was severely affected by the flood event that occurred throughout much of the Colorado Front Range in September of 2013. The 0.5-meter WorldView-2 data products were created from imagery collected by DigitalGlobe on September 13 and September 24, 2013, during and following the flood event. The images shown on this map were created to support flood response efforts, specifically for use in determining damage assessment and mitigation decisions. The raw, unprocessed imagery were orthorectified and pan-sharpened to enhance mapping accuracy and spatial resolution, and reproduced onto a cartographic base map. These maps are intended to provide a snapshot representation of post-flood ground conditions, which may be useful to decisionmakers and the general public. The SASC also provided data processing and analysis support for other Colorado flood-affected areas by creating cartographic products, geo-corrected electro-optical and radar image mosaics, and GIS water cover files for use by the Colorado National Guard, the National Park Service, the U.S. Forest Service, and the flood response community. All products for this International Charter event were uploaded to the USGS Hazards Data Distribution System (HDDS) website (http://hdds.usgs.gov/hdds2/) for distribution.

Colorado↗
USGS2015

Reducing soluble phosphorus in dairy effluents through application of mine drainage residuals

Three different dairy manure wastewater effluent samples were amended with mine drainage residuals (MDR) to evaluate the suitability of MDR for sequestration of phosphorus (P). Geochemical modeling of the manure wastewater compositions indicated that partially soluble P-bearing minerals including hydroxyapatite, octacalcium phosphate, and vivianite were all oversaturated in each of the manure wastewater samples. Initial MDR amendment test results indicated that these partially soluble P minerals suspended in the wastewater replenished P in the water phase as it was sorbed by the MDR samples. Further investigations revealed that the MDR samples were effective in decreasing soluble P when the amended manure was tested using the water-extractable P procedure. Under these conditions, up to 90 percent of the soluble P in the manure was converted to a sorbed, water-insoluble state. Water contamination and large-scale validation tests of the process were also conducted.

Communications in Soil Science and Plant Analysis↗
USGS2007

The U.S. Geological Survey Land Remote Sensing Program

The fundamental goals of the U.S. Geological Survey's Land Remote Sens-ing (LRS) Program are to provide the Federal Government and the public with a primary source of remotely sensed data and applications and to be a leader in defining the future of land remote sensing, nationally and internationally. Remotely sensed data provide information that enhance the understand-ing of ecosystems and the capabilities for predicting ecosystem change. The data promote an understanding of the role of the environment and wildlife in human health issues, the requirements for disaster response, the effects of climate variability, and the availability of energy and mineral resources. Also, as land satellite systems acquire global coverage, the program coordinates a network of international receiving stations and users of the data. It is the responsibility of the program to assure that data from land imaging satellites, airborne photography, radar, and other technologies are available to the national and global science communities.

Fact Sheet↗
USGS2023

Improving the operational simplified surface energy balance evapotranspiration model using the forcing and normalizing operation

Actual evapotranspiration modeling is providing useful information for researchers and resource managers in agriculture and water resources around the world. The performance of models depends on the accuracy of forcing inputs and model parameters. We developed an improved approach to the parameterization of the Operational Simplified Surface Energy Balance (SSEBop) model using the Forcing and Normalizing Operation (FANO). SSEBop has two key model parameters that define the model boundary conditions. The FANO algorithm computes the wet-bulb boundary condition using a linear FANO Equation relating surface temperature, surface psychrometric constant, and the Normalized Difference Vegetation Index (NDVI). The FANO parameterization was implemented on two computing platforms using Landsat and gridded meteorological datasets: (1) Google Earth Engine (GEE) and (2) Earth Resources Observation and Science (EROS) Center Science Processing Architecture (ESPA). Evaluation was conducted by comparing modeled actual evapotranspiration ( ETa ) estimates with AmeriFlux eddy covariance (EC) and water balance ETa from level-8 Hydrologic Unit Code sub-basins in the conterminous United States. FANO brought substantial improvements in model accuracy and operational implementation. Compared to the earlier version (v0.1.7), SSEBop FANO (v0.2.6) reduced grassland bias from 47% to −2% while maintaining comparable bias for croplands (11% versus −7%) against EC data. A water balance-based ETa bias evaluation showed an overall improvement from 7% to −1%. Climatology versus annual gridded reference evapotranspiration ( ETr ) produced comparable ETa results, justifying the use of climatology ETr for the global SSEBop Landsat ETa that is accessible through the ESPA website. Besides improvements in model accuracy, SSEBop FANO increases the spatiotemporal coverage of ET modeling due to the elimination of high NDVI requirements for model parameterization. Because of the existence of potential biases from forcing inputs and model parameters, continued evaluation and bias corrections are necessary to improve the absolute magnitude of ETa for localized water budget applications.

Remote Sensing↗
USGS2014

Improvement of the R-SWAT-FME framework to support multiple variables and multi-objective functions

Application of numerical models is a common practice in the environmental field for investigation and prediction of natural and anthropogenic processes. However, process knowledge, parameter identifiability, sensitivity, and uncertainty analyses are still a challenge for large and complex mathematical models such as the hydrological/water quality model, Soil and Water Assessment Tool (SWAT). In this study, the previously developed R program language-SWAT-Flexible Modeling Environment (R-SWAT-FME) was improved to support multiple model variables and objectives at multiple time steps (i.e., daily, monthly, and annually). This expansion is significant because there is usually more than one variable (e.g., water, nutrients, and pesticides) of interest for environmental models like SWAT. To further facilitate its easy use, we also simplified its application requirements without compromising its merits, such as the user-friendly interface. To evaluate the performance of the improved framework, we used a case study focusing on both streamflow and nitrate nitrogen in the Upper Iowa River Basin (above Marengo) in the United States. Results indicated that the R-SWAT-FME performs well and is comparable to the built-in auto-calibration tool in multi-objective model calibration. Overall, the enhanced R-SWAT-FME can be useful for the SWAT community, and the methods we used can also be valuable for wrapping potential R packages with other environmental models.

Science of the Total Environment↗
USGS2013

Quantifying groundwater’s role in delaying improvements to Chesapeake Bay water quality

A study has been undertaken to determine the time required for the effects of nitrogen-reducing best management practices (BMPs) implemented at the land surface to reach the Chesapeake Bay via groundwater transport to streams. To accomplish this, a nitrogen mass-balance regression (NMBR) model was developed and applied to seven watersheds on the Delmarva Peninsula. The model included the distribution of groundwater return times obtained from a regional groundwater-flow (GWF) model, the history of nitrogen application at the land surface over the last century, and parameters that account for denitrification. The model was (1) able to reproduce nitrate concentrations in streams and wells over time, including a recent decline in the rate at which concentrations have been increasing, and (2) used to forecast future nitrogen delivery from the Delmarva Peninsula to the Bay given different scenarios of nitrogen load reduction to the water table. The relatively deep porous aquifers of the Delmarva yield longer groundwater return times than those reported earlier for western parts of the Bay watershed. Accordingly, several decades will be required to see the full effects of current and future BMPs. The magnitude of this time lag is critical information for Chesapeake Bay watershed managers and stakeholders.

Delaware, Maryland↗
USGS2018

Environmental risks and challenges associated with neonicotinoid insecticides

Neonicotinoid use has increased rapidly in recent years, with a global shift towards insecticide applications as seed coatings rather than aerial spraying. While the use of seed coatings can lessen the amount of overspray and drift, the near universal and prophylactic use of neonicotinoid seed coatings on major agricultural crops has led to widespread detections in the environment (pollen, soil, water, honey). Pollinators and aquatic insects appear to be especially susceptible to the effects of neonicotinoids with current research suggesting that chronic sub-lethal effects are more prevalent than acute toxicity. Meanwhile, evidence of clear and consistent yield benefits from the use of neonicotinoids remains elusive for most crops. Future decisions on neonicotinoid use will benefit from weighing crop yield benefits versus environmental impacts to non-target organisms and considering whether there are more environmentally benign alternatives.

Environmental Science & Technology↗
USGS2016

Primary production in the Delta: Then and now

To evaluate the role of restoration in the recovery of the Delta ecosystem, we need to have clear targets and performance measures that directly assess ecosystem function. Primary production is a crucial ecosystem process, which directly limits the quality and quantity of food available for secondary consumers such as invertebrates and fish. The Delta has a low rate of primary production, but it is unclear whether this was always the case. Recent analyses from the Historical Ecology Team and Delta Landscapes Project provide quantitative comparisons of the areal extent of 14 habitat types in the modern Delta versus the historical Delta (pre-1850). Here we describe an approach for using these metrics of land use change to: (1) produce the first quantitative estimates of how Delta primary production and the relative contributions from five different producer groups have been altered by large-scale drainage and conversion to agriculture; (2) convert these production estimates into a common currency so the contributions of each producer group reflect their food quality and efficiency of transfer to consumers; and (3) use simple models to discover how tidal exchange between marshes and open water influences primary production and its consumption. Application of this approach could inform Delta management in two ways. First, it would provide a quantitative estimate of how large-scale conversion to agriculture has altered the Delta's capacity to produce food for native biota. Second, it would provide restoration practitioners with a new approach—based on ecosystem function—to evaluate the success of restoration projects and gauge the trajectory of ecological recovery in the Delta region.

California↗
USGS2011

Integrating estimates of ecosystem services from conservation programs and practices into models for decision makers

Most government agencies involved in land management are seeking consistent approaches to evaluate the effects of specific management actions on ecological processes and concurrent changes on ecosystem services. This is especially true within the context of anthropogenic influences, such as land use and climate change. The Conservation Effects Assessment Project—Wetlands National Component (CEAP–Wetlands) was developed by the U.S. Department of Agriculture (USDA) to evaluate effects of conservation practices on ecosystem services including carbon sequestration for climate stability, groundwater recharge, runoff and flood attenuation, water storage, nutrient and contaminant retention, and wildlife habitat. A primary purpose of CEAP–Wetlands is to provide science‐based information in an adaptive monitoring framework for use by the USDA to facilitate policy and management decisions, and to document effects of conservation programs and practices to the federal Office of Management and Budget. Herein, we propose a modeling framework to allow estimation of conservation practice and program effects on various ecosystem services at different temporal and spatial scales. This modeling approach provides the broad view needed by decision‐makers to avoid unintended negative environmental outcomes, and to communicate to society the positive effects of conservation actions on a broad suite of ecosystem services.

Ecological Applications↗
USGS2002

A reconnaissance study of herbicides and their metabolites in surface water of the midwestern united states using immunoassay and gas chromatography/mass spectrometry

Preemergent herbicides and their metabolites, particularly atrazine, deethylatrazine, and metolachlor, persisted from 1989 to 1990 in the majority of rivers and streams in the midwestern United States. In spring, after the application of herbicides, the concentrations of atrazine, alachlor, and simazine were frequently 3-10 times greater than the U.S. Environmental Protection Agency maximum contaminant level (MCL). The concentration of herbicides exceeded the MCLs both singly and in combination. Two major degradation products of atrazine (deisopropylatrazine and deethylatrazine) also were found in many of the streams. The order of persistence of the herbicides and their metabolites in surface water was atrazine > deethylatrazine > metolachlor > alachlor > deisopropylatrazine > cyanazine. Storm runoff collected at several sites exceeded the MCL multiple times during the summer months as a function of stream discharge, with increased concentrations during times of increased streamflow. It is proposed that metabolites of atrazine may be used as indicators of surface-water movement into adjacent alluvial aquifers.

Environmental Science & Technology↗