Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Rocky Mountain Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources
USGS2016

California State Waters Map Series — Monterey Canyon and vicinity, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath bathymetry data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The Monterey Canyon and Vicinity map area lies within Monterey Bay in central California. Monterey Bay is one of the largest embayments along the west coast of the United States, spanning 36 km from its northern to southern tips (in Santa Cruz and Monterey, respectively) and 20 km along its central axis. Not only does it contain one of the broadest sections of continental shelf along California’s coast, it also contains Monterey Canyon, one of the largest and deepest submarine canyons in the world. Note that the California’s State Waters limit extends farther offshore between Santa Cruz and Monterey so that it encompasses all of Monterey Bay. The coastal area within the map area is lightly populated. The community of Moss Landing (population, 204) hosts the largest commercial fishing fleet in Monterey Bay in its harbor. The map area also includes parts of the cities of Marina (population, about 20,000) and Castroville (population, about 6,500). Fertile lowlands of the Salinas River and Pajaro River valleys largely occupy the inland part of the map area, and land use is primarily agricultural. The offshore part of the map area lies completely within the Monterey Bay National Marine Sanctuary. The map area also includes Portuguese Ledge and Soquel Canyon State Marine Conservation Areas. Designated conservation and (or) recreation areas in the onshore part of the map area include Salinas River National Wildlife Refuge, Elkhorn Slough State Marine Conservation Area, Elkhorn Slough State Marine Reserve, Moss Landing Wildlife Area, Zmudowski and Salinas River State Beaches, and Marina Dunes Preserve. Monterey Bay, a geologically complex area within a tectonically active continental margin, lies between two major, converging strike-slip faults. The northwest-striking San Andreas Fault lies about 34 km east of Monterey Bay; this section of the fault ruptured in both the 1989 M6.9 Loma Prieta earthquake and the 1906 M7.8 great California earthquake. The northwest-striking San Gregorio Fault crosses Monterey Canyon west of Monterey Bay. Between these two regional faults, strain is accommodated by the northwest-striking Monterey Bay Fault Zone. Deformation associated with these major regional faults and related structures has resulted in uplift of the Santa Cruz Mountains, as well as the granitic highlands of the Monterey peninsula. Monterey Canyon begins in the nearshore area directly offshore of Moss Landing and Elkhorn Slough, and it can be traced for more than 400 km seaward, out to water depths of more than 4,000 m. Within the map area, the canyon can be traced for about 42 km to a water depth of about 1,520 m. The head of the canyon consists of three branches that begin about 150 m offshore of Moss Landing Harbor. At 500 m offshore, the canyon is already 70 m deep and 750 m wide. Large sand waves, which have heights from 1 to 3 m and wavelengths of about 50 m, are present along the channel axis in the upper 4 km of the canyon. Soquel Canyon is the most prominent tributary of Monterey Canyon within the map area. The head of Soquel Canyon is isolated from coastal watersheds and, thus, is considered inactive as a conduit for coarse sediment transport. North and south of Monterey and Soquel Canyons, the relatively flat continental shelf contains only a few rocky outcrop exposures. Bedrock is covered largely by sediment derived from the Salinas and Pajaro Rivers. North of Monterey Canyon, the broad and flat continental shelf dips gently seaward, to water depths of about 95 m. To the south, the shelf also dips slightly, to water depths of as much as 150 m along the canyon edge. In the map area, Monterey Canyon splits the Santa Cruz littoral cell (north of the canyon) and the southern Monterey littoral cell (south of the canyon). It is estimated that about 400,000 m 3 /yr of sand on average enters Monterey Canyon from both of these littoral cells. In the Santa Cruz littoral cell, sand generally travels east and south. Sand is supplied through sea cliff erosion, as well as from the San Lorenzo River, the Pajaro River, and several other smaller coastal watersheds. About 152,911 m 3 /yr of sand is dredged from the entrance channel of the Santa Cruz Small Craft Harbor north of the map area and then placed on beaches to the east (downdrift) of it. This sand feeds the beaches in the southeastern reach of the Santa Cruz littoral cell and (or) is eventually trapped and lost by Monterey Canyon. The southern Monterey Bay littoral cell in the map area consists of two subcells. From the head of Monterey Canyon to the Salinas River, littoral drift is dominantly to the north; sand entering the ocean from the Salinas River either is deposited offshore or travels north in the littoral zone, nourishing the beaches until it is transported down Monterey Canyon. From south of the Salinas River to the southern extent of the map area, coastal sediment is moved mainly to the south; dune erosion is the only significant source of sand in this subcell.

California↗
USGS1961

Paleoecology of an early oligocene biota from Douglass Creek Basin, Montana

Douglass Creek basin lies west of the Continental Divide in the northern part of the Rocky Mountain physiographic province. Numerous minor environmental differences exist between the Douglass Creek area and the Pipestone Springs and Canyon Ferry areas east of the Divide. In the 19th century, however, the three areas had identical mammalian species representation, although not equally dense populations. Fossils of an early Oligocene biota have been collected from the Douglass Creek basin . Presence of all but one of the Douglass Creek mammalian species in the Pipestone Springs-Canyon Ferry early Oligocene fauna suggests that the three ancient ecosystems resembled each other in much the same way as the 19th century systems. The early Oligocene deposits and biota of the Douglass Creek basin indicate a moist, temperate climate with seasonal variations. Sediment size and distribution suggest that the cross-valley relief was no greater than it is now. The fish and invertebrate faunas show that a shallow, hard-water lake existed in the area. The flora included a lowland, lake-border association and an upland coniferous forest. Although the ancient Douglass Creek biota doubtless included many species not represented in the fossil collections, most of the mammalian species are probably represented in the combined Douglass Creek , Pipestone Springs, and Canyon Ferry fossil assemblages. If so, the number of mammalian species was about the same as in the 19th century ecosystem.

Montana↗
USGS2002

Traveltime characteristics of Gore Creek and Black Gore Creek, upper Colorado River basin, Colorado

In the Rocky Mountains of Colorado, major highways are often constructed in stream valleys. In the event of a vehicular accident involving hazardous materials, the close proximity of highways to the streams increases the risk of contamination entering the streams. Recent population growth has contributed to increased traffic volume along Colorado highways and has resulted in increased movement of hazardous materials, particularly along Interstate 70. Gore Creek and its major tributary, Black Gore Creek, are vulnerable to such contamination from vehicular accidents along Interstate 70. Gore Creek, major tributary of the Eagle River, drains approximately 102 square miles, some of which has recently undergone significant urban development. The headwaters of Gore Creek originate in the Gore Range in the eastern part of the Gore Creek watershed. Gore Creek flows west to the Eagle River. Beginning at the watershed boundary on Vail Pass, southeast of Vail Ski Resort, Interstate 70 parallels Black Gore Creek and then closely follows Gore Creek the entire length of the watershed. Interstate 70 crosses Gore Creek and tributaries 20 times in the watershed. In the event of a vehicular accident involving a contaminant spill into Gore Creek or Black Gore Creek, a stepwise procedure has been developed for water-resource managers to estimate traveltimes of the leading edge and peak concentration of a conservative contaminant. An example calculating estimated traveltimes for a hypothetical contaminant release in Black Gore Creek is provided. Traveltime measurements were made during May and September along Black Gore Creek and Gore Creek from just downstream from the Black Lakes to the confluence with the Eagle River to account for seasonal variability in stream discharge. Fluorometric dye injection of rhodamine WT and downstream dye detection by fluorometry were used to measure traveltime characteristics of Gore Creek and Black Gore Creek. During the May traveltime measurements, discharges ranged from 82 cubic feet per second (ft3/s) at Black Gore Creek near Minturn (U.S. Geological Survey station number 09066000) to 724 ft3/s at Gore Creek at mouth near Minturn (U.S. Geological Survey station number 09066510), whereas during the September traveltime measurements, discharges ranged from 3.6 ft3/s at Black Gore Creek near Minturn to 62 ft3/s at Gore Creek at mouth near Minturn. Cumulative traveltimes for the peak dye concentration during the May traveltime measurements ranged from 3.45 hours (site 1 to site 3) in Black Gore Creek to 2.50 hours (site 8 to site 12) in Gore Creek, whereas cumulative traveltimes for the peak dye concentration during the September traveltime measurements ranged from 15.33 hours (site 1 to site 3) in Black Gore Creek to 8.65 hours (site 8 to site 12) in Gore Creek. During the September dye injections, beaver dams on Black Gore Creek, between site 1 and the confluence with Gore Creek, substantially delayed movement of the rhodamine WT. Estimated traveltimes were developed using relations established from linear-regression methods of relating measured peak traveltime to discharge during those measurements, which were obtained at Black Gore Creek near Minturn and Gore Creek at mouth near Minturn. Resulting estimated peak traveltimes for Black Gore Creek (sites 1 to 5) ranged from 5.4 to 0.4 hour for 20 to 200 ft3/s and for Gore Creek (sites 5 to 12), 5.5 to 0.3 hour for 20 to 800 ft3/s. Longitudinal-dispersion coefficients that were calculated for selected stream reaches ranged from 17.2 square feet per second at 4 ft3/s between sites 2 and 3 to 650 square feet per second at 144 ft3/s between sites 7 and 8. Longitudinal-dispersion coefficients are necessary variables for future stream-contaminant modeling in the Gore Creek watershed.

Water-Resources Investigations Report↗
USGS1998

Preliminary results from the investigation of the Pymatuning earthquake of September 25, 1998

The Pymatuning earthquake occurred on Friday, September 25, 1998, at 19:52:52 Universal Coordinated Time (UTC), or 3:52:52 p.m. EDT, near Jamestown, Pa., at the southern end of the Pymatuning Reservoir, which straddles the Ohio-Pennsylvania border. The National Earthquake Information Center (NEIC) determined that the event had a magnitude of 5.2 mbLg (a magnitude scale used to measure the size of earthquakes that are regional distances away [100 to 1,000 km, or 60 to 600 mi]), an epicenter of 41.5°N latitude, 80.4°W longitude, and an estimated depth of 5 km (3 mi). One person was reported injured as a result of being thrown to the ground by the earthquake, and it caused minor damage to buildings and seriously disrupted many water wells in the GreenvilleJamestown, Pa., area. The earthquake was generally felt over an area of approximately 200,000 km 2 (77,230 mi 2 ) throughout northern Ohio, western Pennsylvania and New York, and much of southern Ontario, Canada (see map on back cover). It was also felt as far west as Illinois and Wisconsin, as far east as New Jersey, Connecticut, and the District of Columbia, and as far south as Kentucky and Virginia. During the aftershock field investigation that commenced within 12 hours of the main shock, a World Wide Web site, < http://groundmotion.cr.usgs.gov/pym/pym.htm >, was established from the field headquarters. The web site was used not only to transmit investigation results to the world in near real time but also to receive information from the local community as new earthquake effects were reported. As of March 1999, at least 11 aftershocks have occurred, the largest being a magnitude 2.3. The largest recent previous earthquake in the region was the northeastern Ohio (Leroy) earthquake of magnitude 5.0 that occurred on January 31, 1986, about 65 km (40 mi) west-northwest of the Pymatuning shock. This event was also felt by many of those who felt the Pymatuning earthquake. Similar to most of the seismicity east of the Rocky Mountains, earthquakes in the region are probably shallow (5 to 10 km, or 3 to 6 mi), and Seeber and Armbruster (1993) hypothesized that the earthquakes occurred along preexisting zones of weakness in Precambrian rocks. Wegweiser and others (1998) suggested that seismicity in northwestern Pennsylvania may be associated with the northwest-trending “cross-strike discontinuities” that are recognized in Paleozoic rocks and may represent reactivation of faults in the Precambrian basement. Using structure-contour maps constructed on the tops of lower Paleozoic strata, Alexandrowicz and Cole (1999) found evidence of preexisting northwest-striking faults in the epicentral region of the Pymatuning shock. The Harvard focal mechanism for the Pymatuning earthquake (a method used to infer the slip and orientation of the fault that generated an earthquake) indicates thrust faulting on a northwest striking plane, which is consistent with the regional northeast-southwest compressive stress regime observed in the area. Seeber and Armbruster (1993) plotted three prior earthquakes in the epicentral area having magnitudes greater than 3; two were instrumentally located near the Pymatuning earthquake, and the third event occurred 20 to 30 km (12 to 19 mi) to the northeast in 1852 (Figure 1).

Connecticut;District of Columbia;Illinois;Kentucky↗
USGS1987

Hydrology of area 46, Northern Great Plains and Rocky Mountain coal provinces, North Dakota

This report is one of a series that describes the hydrology of coal provinces nationwide. The Northern Great Plains and Rocky Mountain Coal Provinces are divided into 20 separate reporting areas which are numbered 43 to 62. This report provides general hydrologic information for Area 46 using a brief text with accompanying maps, charts, or graphs. This information may be used to describe the hydrology of the general area of any existing or proposed mine. Some of the more obvious hydrologic problems of coal development that will need to be addressed before development are disruption of aquifers and potential contamination of streams, aquifers, and the atmosphere. Area 46 is in northwestern North Dakota and is composed of parts or all of 14 hydrologic units based on surface-water drainage basins. The area is drained by the Missouri and Souris Rivers. Lignite-bearing rocks of late Paleocene age underlie nearly all of Area 46. The thickest and most continuous lignite beds occur in the Sentinel Butte and Tongue River Members of the Fort Union Formation. Alluvial deposits and a veneer of glacial drift of late Pleistocene age overlie the lignite-bearing rocks. The climate of the area is semiarid. Mean annual precipitation ranges from 13.9 to 17.8 inches. Mean annual temperatures range from 37.7°F at Bowbells to 40.9°F at Williston. Mean monthly temperatures at Williston range from 8.3°F to 70°F. The growing season is about 125 days. A fairly comprehensive data base for streamflow and water quality in streams is available for Area 46. Many of the small-stream monitoring sites have been operated during the last few years to provide a data base before coal development. With the exception of the Missouri River, which is controlled by several dams, both the quantity and quality of water varies greatly in all streams. A ground-water observation network for water levels and water quality has been established through county ground-water resource investigations and other ground-water studies and provides an adequate data base. Three activities within the U.S. Geological Survey identify and provide access to hydrologic data. These are the National Water-Data Exchange (NAWDEX), the National Water-Data Storage and Retrieval System (WATSTORE), and the Office of Water-Data Coordination (OWDC).

Open-File Report↗
USGS2014

California State Waters Map Series: Offshore of Coal Oil Point, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Coal Oil Point map area lies within the central Santa Barbara Channel region of the Southern California Bight. This geologically complex region forms a major biogeographic transition zone, separating the cold-temperate Oregonian province north of Point Conception from the warm-temperate California province to the south. The map area is in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges province, and geodetic studies indicate that the region is presently undergoing north-south shortening. Uplift rates (as much as 2.0 mm/yr) that are based on studies of onland marine terraces provide further evidence of significant shortening. The cities of Goleta and Isla Vista, the main population centers in the map area, are in the western part of a contiguous urban area that extends eastward through Santa Barbara to Carpinteria. This urban area is on the south flank of the east-west-trending Santa Ynez Mountains, on coalescing alluvial fans and uplifted marine terraces underlain by folded and faulted Miocene bedrock. In the map area, the relatively low-relief, elevated coastal bajada narrows from about 2.5 km wide in the east to less than 500 m wide in the west. Several beaches line the actively utilized coastal zone, including Isla Vista County Park beach, Coal Oil Point Reserve, and Goleta Beach County Park. The beaches are subject to erosion each winter during storm-wave attack, and then they undergo gradual recovery or accretion during the more gentle wave climate of the late spring, summer, and fall months. The Offshore of Coal Oil Point map area lies in the central part of the Santa Barbara littoral cell, which is characterized by littoral drift to the east-southeast. Longshore drift rates have been reported to range from about 160,000 to 800,000 tons/yr, averaging 400,000 tons/yr. Sediment supply to the western and central parts of the littoral cell, including the map area, is largely from relatively small transverse coastal watersheds. Within the map area, these coastal watersheds include (from east to west) Las Llagas Canyon, Gato Canyon, Las Varas Canyon, Dos Pueblos Canyon, Eagle Canyon, Tecolote Canyon, Winchester Canyon, Ellwood Canyon, Glen Annie Canyon, and San Jose Creek. The Santa Ynez and Santa Maria Rivers, the mouths of which are about 100 to 140 km northwest of the map area, are not significant sediment sources because Point Conception and Point Arguello provide obstacles to downcoast sediment transport and also because much of their sediment load is trapped in dams. The Ventura and Santa Clara Rivers, the mouths of which are about 45 to 55 km southeast of the map area, are much larger sediment sources. Still farther east, eastward-moving sediment in the littoral cell is trapped by Hueneme and Mugu Canyons and then transported to the deep-water Santa Monica Basin. The offshore part of the map area consists of a relatively flat and shallow continental shelf, which dips gently seaward (about 0.8° to 1.0°) so that water depths at the shelf break, roughly coincident with the California’s State Waters limit, are about 90 m. This part of the Santa Barbara Channel is relatively well protected from large Pacific swells from the north and northwest by Point Conception and from the south and southwest by offshore islands and banks. The shelf is underlain by variable amounts of upper Quaternary marine and fluvial sediments deposited as sea level fluctuated in the late Pleistocene. The large (130 km2) Goleta landslide complex lies along the shelf break in the southern part of the map area. This compound slump complex may have been initiated more than 200,000 years ago, but it also includes three recent failures that may have been generated between 8,000 to 10,000 years ago. A local, 5- to 10-m-high tsunami may have been generated from these failure events. The map area has had a long history of hydrocarbon development, which began in 1928 with discovery of the Ellwood oil field. Subsequent discoveries in the offshore include South Ellwood offshore oil field, Coal Oil Point oil field, and Naples oil and gas field. Development of South Ellwood offshore field began in 1966 from platform “Holly,” the last platform to be installed in California’s State Waters. The area also is known for “the world’s most spectacular marine hydrocarbon seeps,” and large tar seeps are exposed on beaches east of the mouth of Goleta Slough. Offshore seeps adjacent to South Ellwood oil field release about 40 tons per day of methane and about 19 tons per day of ethane, propane, butane, and higher hydrocarbons. Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft sediment and isolated areas of rocky habitat that support kelp-forest communities nearshore and rocky-reef communities in deep water. The potential marine benthic habitat types mapped in the Offshore of Coal Oil Point map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats, which lie primarily within the Shelf (continental shelf) but also partly within the Flank (basin flank or continental slope) megahabitats, range from soft, unconsolidated sediment to hard sedimentary bedrock. This heterogeneous seafloor provides promising habitat for rockfish, groundfish, crabs, shrimp, and other marine benthic organisms.

California↗
USGS2018

California State Waters Map Series — Offshore of Point Conception, California

Introduction In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow subsurface geology. The Offshore of Point Conception map area is in the westernmost part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges province, and this region is presently undergoing north-south shortening. The offshore part of the map area lies south of the stee p south and west flanks of t he Santa Ynez Mountains . The crest of the range , which has a maximum elevation of about 340 m in the map area, lies about 5 km north and east of the arcuate shoreline. The onland part of the coastal zone is remote and sparsely populated. The road to Jalama Beach County Park provides the only public coastal access in the entire map area. North of this county park, the coastal zone is part of Vandenberg Air Force Base. South of Jalama Beach County Park, most of the coastal zone is part of the Cojo-Jalama Ranch, purchased by the Nature Conservancy in December 2017. A relatively small part of the coastal zone in the eastern part of the map area lies within the privately owned Hollister Ranch. The nearest significant commercial centers are Lompoc (population, about 42,000), about 10 km north of the map area, and Goleta (population, about 30,000), about 50 km east of the map area. The Union Pacific railroad tracks run west and northwest along the coast through the entire map area, within a few hundred meters of the shoreline. The map area has a long history of petroleum exploration, and the seafloor notably includes large asphalt mounds and pockmarks that result from petroleum seepage. Several offshore gas and oil fields were discovered, and some were developed, in and on the margin of California’s State Waters. Much of the shoreline in the Offshore of Point Conception map area is characterized by narrow beaches that have thin sediment cover above bedrock platforms, backed by low (10- to 20-m-high) cliffs that are capped by a coastal terrace. Beaches are subject to wave erosion during winter storms, followed by gradual sediment recovery or accretion in the late spring, summer, and fall months during the gentler wave climate. The map area lies in the west-central part of the Santa Barbara littoral cell, which is characterized by west-to-east transport of sediment from Point Arguello on the northwest to Hueneme and Mugu Canyons on the southeast. Sediment supply to the map area is mainly from relatively small coastal watersheds, including the Jalama Creek–Espada Creek drainage basin (about 63 km 2 ), as well as Cañada del Jolloru, Black Canyon, Wood Canyon, Cañada del Cojo, and Barranca Honda. Coastal-watershed discharge and sediment load are highly variable, characterized by brief large events during major winter storms and long periods of low (or no) flow and minimal sediment load between storms. In recent (recorded) history, the majority of high-discharge, high-sediment-flux events have been associated with El Niño phases of the El Niño–Southern Oscillation climatic pattern. Following the coastline, the shelf bends to the north and northwest around Point Conception, and the trend of the shelf break changes from about 298° to 241° azimuth. Shelf width ranges from about 5 km south of Point Conception to about 11 km northwest of it; the slope ranges from about 1.0° to 1.2° to about 0.7° south and northwest of Point Conception, respectively. Southwest of Point Conception, the shelf break and upper slope are incised by a 600-m-wide, 20- to 30-m-deep, south-facing trough, one of five heads of the informally named Arguello submarine canyon. The map area is located at a major biogeographic transition zone between the east-west-trending Santa Barbara Channel region of the Southern California Bight and the northwest-trending central California coast. North of Point Conception, the coast is subjected to high wave exposure from the north, west, and south, as well as consistently strong upwelling that brings cold, nutrient-rich waters to the surface. Southeast of Point Conception, the Santa Barbara Channel is largely protected from strong north swells by Point Conception and from south swells by the Channel Islands; surface waters are warmer, and upwelling is weak and seasonal. Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft, unconsolidated sediment interspersed with isolated areas of rocky habitat that support kelp-forest communities in the nearshore and rocky-reef communities in deeper water. The potential marine benthic habitat types mapped in the Offshore of Point Conception map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats lie primarily within the Shelf (continental shelf) but also partly within the Flank (basin flank or continental slope) megahabitats. The fairly homogeneous seafloor of sediment and low-relief bedrock provides characteristic habitat for rockfish, groundfish, crabs, shrimp, and other marine benthic organisms. Several areas of smooth sediment form nearshore terraces that have relatively steep, smooth fronts, which are attractive to groundfish. Below the steep shelf break, soft, unconsolidated sediment is interrupted by the heads of several submarine canyons, gullies, and rills, also good potential habitat for rockfish. The map area includes the large (58.3 km 2 ) Point Conception State Marine Reserve.

California↗
USGS2001

Temporal coherence of two alpine lake basins of the Colorado Front Range, USA

1. Knowledge of synchrony in trends is important to determining regional responses of lakes to disturbances such as atmospheric deposition and climate change. We explored the temporal coherence of physical and chemical characteristics of two series of mostly alpine lakes in nearby basins of the Colorado Rocky Mountains. Using year-to-year variation over a 10-year period, we asked whether lakes more similar in exposure to the atmosphere be-haved more similarly than those with greater influence of catchment or in-lake processes. 2. The Green Lakes Valley and Loch Vale Watershed are steeply incised basins with strong altitudinal gradients. There are glaciers at the heads of each catchment. The eight lakes studied are small, shallow and typically ice-covered for more than half the year. Snowmelt is the dominant hydrological event each year, flushing about 70% of the annual discharge from each lake between April and mid-July. The lakes do not thermally stratify during the period of open water. Data from these lakes included surface water temper-ature, sulphate, nitrate, calcium, silica, bicarbonate alkalinity and conductivity. 3. Coherence was estimated by Pearson's correlation coefficient between lake pairs for each of the different variables. Despite close geographical proximity, there was not a strong direct signal from climatic or atmospheric conditions across all lakes in the study. Individual lake characteristics overwhelmed regional responses. Temporal coherence was higher for lakes within each basin than between basins and was highest for nearest neighbours. 4. Among the Green Lakes, conductivity, alkalinity and temperature were temporally coherent, suggesting that these lakes were sensitive to climate fluctuations. Water tem-perature is indicative of air temperature, and conductivity and alkalinity concentrations are indicative of dilution from the amount of precipitation flushed through by snowmelt. 5. In Loch Vale, calcium, conductivity, nitrate, sulphate and alkalinity were temporally coherent, while silica and temperature were not. This suggests that external influences are attenuated by internal catchment and lake processes in Loch Vale lakes. Calcium and sulphate are primarily weathering products, but sulphate derives both from deposition and from mineral weathering. Different proportions of snowmelt versus groundwater in different years could influence summer lake concentrations. Nitrate is elevated in lake waters from atmospheric deposition, but the internal dynamics of nitrate and silica may be controlled by lake food webs. Temperature is attenuated by inconsistently different climates across altitude and glacial meltwaters. 6. It appears that, while the lakes in the two basins are topographically close, geologically and morphologically similar, and often connected by streams, only some attributes are temporally coherent. Catchment and in-lake processes influenced temporal patterns, especially for temperature, alkalinity and silica. Montane lakes with high altitudinal gradients may be particularly prone to local controls compared to systems where coherence is more obvious.

Colorado↗
USGS2005

Sediment-transport investigations of the upper Yellowstone River, Montana, 1999 through 2001: Data collection, analysis, and simulation of sediment transport

The upper Yellowstone River in Montana is an important State and national water resource, providing recreational, agricultural, and commercial benefits. Floods in 1996 and 1997, with recorded peak discharges having recurrence intervals close to 100 years, caused substantial streambank erosion and hill- slope mass wasting. Large quantities of sand-, gravel-, and cobble-sized material entrained by the flood flows became flood-bar deposits, creating a source of sediment available for transport during future floods. The flood damage and resulting sedimentation raised concerns about potential streambank-stabilization projects and how the river and riparian corridor might be managed in the future. The U.S. Geological Survey, in cooperation with the Park Conservation District, the Montana Department of Transportation, and the U.S. Army Corps of Engineers, investigated sediment transport in the upper Yellowstone River near Livingston from 1999 through 2001 as part of a cumulative effects study to provide a scientific basis for future river management decisions. The purpose of this report is to present the results of data collection, analysis, and simulation of sediment transport for the upper Yellowstone River. The study area included a 13.5-mile study reach of the upper Yellowstone River where substantial sediment transport occurred in 1996 and 1997. In this study area, the upper Yellowstone River is a high gradient, coarse-bed stream having a slope of about 0.0028 foot per foot or more than 14 feet per mile. The study area drains about 3,551 square miles, and runoff results primarily from snowmelt during the spring and summer months. As part of sediment-transport investigations, the U.S. Geological Survey surveyed river cross sections, characterized streambed-material particle size using particle counts and sieve analyses, and collected bedload- and suspended-sediment data during three runoff seasons (1999-2001). Data were collected for stream discharges that ranged from 2,220 cubic feet per second (typical of pre- and post-runoff discharge) to 25,100 cubic feet per second (about 125 percent of bankfull discharge). The distribution of streambed-material particle size was determined, and sediment-transport curves for bedload discharge, suspended-sediment discharge, and total-sediment discharge were developed. The threshold values of streamflow and average stream velocity needed for initiation of bedload transport for selected sediment-size classes showed that little to no bedload was transported for an average stream velocity below about 3 feet per second, and the only particle size transported as bedload at that velocity was sand. Over the range of stream discharges sampled and with silt- and finer-sized particles excluded, bedload discharge averaged about 18 percent of the total-sediment discharge, equal to bedload discharge plus suspended-sediment discharge. At the lowest and highest stream discharges sampled, bedload was, respectively, less than about 2 percent and about 30 percent of the total-sediment discharge. Over the range of stream discharges sampled, the sand-sized part of the total suspended-sediment discharge averaged about 48 percent, where the total suspended-sediment discharge included sand-, silt- and finer-sized particles. At the lowest and highest stream discharges sampled, the sand-sized part of the total suspended-sediment discharge was, respectively, less than about 16 percent and about 50 percent of the total suspended-sediment discharge. The sediment-transport curves were compared to curves for selected sites in the western United States having drainage areas ranging from 21 square miles to over 20,000 square miles. Daily sediment loads transported at bankfull discharge were calculated for each site and results were plotted in relation to drainage area. Results based on the 1999-2001 data-collection period indicate that the estimated daily bedload transported at bankfull discharge in the upper Yellowstone River exceeded the envelope line that bounds the upper end of the data for other selected sites in the Northern Rocky Mountains and is similar in magnitude to that for selected sites in Alaska having braided channels and glacial and snowmelt runoff. Similar comparisons for suspended sediment indicate that daily suspended-sediment load at bankfull discharge is relatively high in the upper Yellowstone River, plotting slightly above the envelope line that bounds the upper end of the data for other selected sites in the Northern Rocky Mountains. Sediment data were used to develop individual transport equations for seven size classes of sediment ranging from small cobbles to very fine sand. A step-wise regression procedure relating sediment discharge to important hydraulic variables showed that average stream velocity was the only significant variable at the 95-percent confidence level. Bedload and suspended-sediment data and equations indicate that more sand is transported for a given velocity than any other particle size, and very little sand-size sediment load is transported below an average stream velocity of about 2.5 feet per second. Transport of coarser-sized sediment (limited to bedload) becomes very little for an average velocity less than about 3.5 feet per second. Results for the 1999-2001 data-collection period indicate that sediment transport in the upper Yellowstone River tends to be limited more by the transport capacity of the stream (capacity or transport limited), than to the availability of sediment in the watershed (supply limited). Sediment data collected and analyzed were used to simulate sediment transport in the study reach using the BRIdge Stream Tube model for Alluvial River Simulation, or BRI-STARS computer model. The model was calibrated and verified using selected data from historical runoff periods. Simulated total-sediment loads, on a reach-averaged basis, were in good agreement with the total-sediment loads determined from the transport curve for the 2-year flood hydrograph but were considerably smaller for the total-sediment loads determined from the transport curve for the 50-, 100-, and 500-year flood hydrographs. The differences probably were largely due to the inability of the model to simulate streambank erosion, hillslope mass-wasting, and other channel-widening processes, which had supplied substantial quantities of sediment to the channel during the 1996 and 1997 floods, and probably continued to contribute to the sediment load in the subsequent years (1999-2001) when the data were collected. Furthermore, the transport curve was applied beyond the measured data for the highest discharges, and may thus be unreliable. Also, the transport curve derived from only limited data may not apply over the full duration of the hydrograph and sediment might be transported over only a portion of the hydrograph, especially for rivers like the upper Yellowstone where snowmelt runoff predominates. The true sediment discharge is, therefore, unknown and might be closer to the simulated values than to the values calculated from the transport curve.

Montana↗
USGS2022

Use case development for earth monitoring, analysis, and prediction (EarthMAP)—A road map for future integrated predictive science at the U.S. Geological Survey

Executive Summary The U.S. Geological Survey (USGS) 21st-century science strategy 2020–30 promotes a bureau-wide strategy to develop and deliver an integrated, predictive science capability that works at the scales and timelines needed to inform societally relevant resource management and protection and public safety and environmental health decisions (U.S. Geological Survey, 2021). This is the overarching goal of the USGS Earth Monitoring, Analysis, and Prediction (EarthMAP) vision, which consists of three components: (1) integrated data and information, (2) integrated predictive science, and (3) actionable information—all designed and delivered to respond to user needs. To launch this vision and help shape the design and implementation of integrated predictive science, the USGS Regional Offices each developed a set of use cases (hereafter Use Cases)—short descriptions of potential science applications that could clearly address high priority decision-making needs of our stakeholders and that align with an integrated science focus. Use Cases are not actionable science planning documents, nor stand-alone scholarly works, but should be considered as innovative, next-generation science ideas that can be considered as potential components of science plans still under development. The goal of Use Case development was to (1) identify and characterize existing USGS scientific capacities and expertise that can support science goals and products, (2) identify opportunities to leverage current capacities for next-generation science, and (3) foster engagement across the entire Bureau to further refine the USGS strategy for EarthMAP and integrated predictive science. The Use Case development effort documented in this report was coordinated by the Use Case Development Team (UCDT), consisting of representatives from each region. The UCDT undertook five tasks: (1) develop a unified approach to engage bureau scientists consistently across all regions in aspirational thinking about what can be accomplished; (2) work with the regions and their Science Centers to generate an initial set of Use Cases, authored directly by scientists; (3) characterize, summarize, and document the initial set of Use Case submissions from authors to illuminate bureau-level demand for integrated science; (4) compare existing and needed capacities from the Use Case descriptions with preliminary results of the EarthMAP Capacity Assessment (Keisman and others, 2021); and (5) describe lessons learned from the Use Case development process and provide recommendations to inform future efforts to generate integrated science activities. This report outlines the approach the UCDT developed to solicit Use Cases from the regions and summarizes the high-level qualitative findings from this first-round effort. The UCDT received 36 Use Cases from the regions and identified potential points of convergence and commonalities considered useful in making connections among the participating scientists. The Southwest (SW) Region and the Rocky Mountain (RM) Region asked scientists to give special consideration to Use Cases with applicability to the Colorado River Basin, and seven of the Use Cases specifically named that geographic area as a focus. Coastal hazards and coastal resilience were identified in Use Cases from the Alaska (AK), Northeast (NE), and Southeast (SE) Regions. Aspects of wildfire and post-wildfire response were part of Uses Cases from AK, RM, and SW Regions. The greatest convergence of Use Case themes was related to conservation of public lands and waters, which is a powerful linkage lending strength to future collaborative efforts. The most common type of stakeholder decisions that would be informed by the Use Case science applications were related to adaptation, mitigation, and response (for example, how to increase the resilience of coastal communities to climate-related stressors and how to prevent or respond to harmful algal blooms). Other common types of decisions included water and land management decisions (including operational water management decisions such as reservoir operations and land use planning in the sagebrush biome), decisions about how to manage and conserve habitats and species, and risk management decisions (such as managing the post-wildfire flood risks). These decision types are not exclusive because many Use Cases cross categories. Use Case authors identified existing and needed science and technology capabilities required for Use Case implementation, which were then aligned to capabilities assessed in the EarthMAP Capacity Assessment (Keisman and others, 2021). Strong alignment was found for data and information integration approaches, modeling and prediction approaches, and capabilities related to delivery of actionable information. A majority of Use Cases indicated insufficient current capacity for needed data collection methods, data integration, and modeling and prediction approaches, whereas only 25 percent indicated insufficient capacity for actionable information delivery. Overall, many Use Case capacity demand gaps could potentially be met by existing bureau-wide capacity. In addition, nearly half of the Use Cases could potentially be implemented within 3 years if funding, capabilities, and personnel impediments were removed and science priorities were realigned. Several challenges emerged during the Use Case development process. The first challenge was developing an approach that was flexible enough to accommodate regional differences in planning and implementation, while also ensuring enough guidance to promote meaningful summary analyses. The UCDT encountered a strong demand for continuous communication and education to improve overall understanding of the integrated predictive science strategy. Another challenge was managing expectations about EarthMAP activities as a design effort that was not aligned to an immediate funding opportunity. Connecting the Use Cases to stakeholder needs without the opportunity for direct stakeholder engagement was also challenging. The last notable challenge was in obtaining consistent interpretation and characterization of the qualitative data housed in the narrative descriptions of Use Cases, written in different styles. Overall, the 36 Use Cases can serve as components of a road map for advancing integrated monitoring and predictive science throughout the USGS by revealing opportunities to (1) encourage cross-region initiatives that address shared interests in common themes by integrating similar Use Cases and through direct involvement of stakeholders in identifying needs and designing effective responses, (2) leverage the Use Cases to target investments that are aligned with the Bureau and Department of the Interior (DOI) priorities, (3) connect Use Cases and the results of the companion EarthMAP Capacity Assessment (Keisman and others, 2021) to identify potential priorities for capacity building investments, and (4) raise awareness of common integrated and interdisciplinary science interests within and across the regions through Use Case and Capacity Assessment summary outreach activities.

Open-File Report↗
USGS2003

Phanerozoic strike-slip faulting in the continental interior platform of the United States: examples from the Laramide Orogen, Midcontinent, and Ancestral Rocky Mountains

The continental interior platform of the United States is that part of the North American craton where a thin veneer of Phanerozoic strata covers Precambrian crystalline basement. N- to NE-trending and W- to NW-trending fault zones, formed initially by Proterozoic/Cambrian rifting, break the crust of the platform into rectilinear blocks. These zones were reactivated during the Phanerozoic, most notably in the late Palaeozoic Ancestral Rockies event and the Mesozoic-Cenozoic Laramide orogeny — some remain active today. Dip-slip reactivation can be readily recognized in cross section by offset stratigraphic horizons and monoclinal fault-propagation folds. Strike-slip displacement is hard to document because of poor exposure. Though offset palaeochannels, horizontal slip lineations, and strain at fault bends locally demonstrate strike-slip offset, most reports of strike-slip movements for interior-platform faults are based on occurrence of map-view belts of en echelon faults and anticlines. Each belt overlies a basement-penetrating master fault, which typically splays upwards into a flower structure. In general, both strike-slip and dip-slip components of displacement occur in the same fault zone, so some belts of en echelon structures occur on the flanks of monoclinal folds. Thus, strike-slip displacement represents the lateral component of oblique fault reactivation; dip-slip and strike-slip components are the same order of magnitude (tens of metres to tens of kilometres). Effectively, faults with strike-slip components of displacement act as transfers accommodating jostling of rectilinear crustal blocks. In this context, the sense of slip on an individual strike-slip fault depends on block geometry, not necessarily on the trajectory of regional σ 1 . Strike-slip faulting in the North American interior differs markedly from that of southern and central Eurasia, possibly because of a contrast in lithosphere strength. Weak Eurasia strained significantly during the Alpine-Himalayan collision, forcing crustal blocks to undergo significant lateral escape. The strong North American craton strained relatively little during collisional-convergent orogeny, so crustal blocks underwent relatively small displacements.

Geological Society Special Publication↗
USGS1984

Sandstone units of the Lee Formation and related strata in eastern Kentucky

Most of the Cumberland Plateau region of southeastern Kentucky is underlain by thick sequences of quartzose sandstone which are assigned for the most part to the Lee Formation. Much new information has been gathered about the Lee and related strata as a result of the cooperative mapping program of the U. S. Geological Survey and the Kentucky Geological Survey between 1960 and 1978. This report summarizes the age, lithology, distribution, sedimentary structures, and stratigraphic relations of the sandstone units of the Lee within and between each of three major outcrop belts in Kentucky: Cumberland Mountain, Pine Mountain, and the Pottsville Escarpment area. The Lee Formation generally has been regarded as Early Pennsylvanian in age and separated from Mississippian strata in Kentucky by an unconformity. However, lithostratigraphic units included in the formation as presently defined are broadly time-transgressive and range in age from Late Mississippian in parts of the Cumberland Mountain outcrop belt to Middle Pennsylvanian in the Pottsville Escarpment area. Members of the Lee intertongue with and grade into the underlying Pennington Formation and overlying Breathitt Formation. Sandstone and conglomeratic sandstone members of the Lee of Mississippian age found only in parts of the Cumberland overthrust sheet are closely associated with marine rocks; Pennsylvanian members are mostly associated with continental coal-bearing strata. Sandstone members of the Lee are mostly quartz rich and range from more than 90 percent to more than 99 percent quartz. They are relatively coarse grained, commonly pebbly, and in places conglomeratic. The units are southwest-trending linear or broadly lobate bodies. The Lee Formation is as much as 1,500 ft thick in the type area in Cumberland Mountain where it has been divided into eight members. The Pinnacle Overlook, Chadwell, White Rocks Sandstone, Middlesboro, Bee Rock Sandstone, and Naese Sandstone Members are mostly quartzose sandstone and conglomerate. The Dark Ridge and Hensley Members are mostly shale, siltstone, thin-bedded silty sandstone, and coal. The lower three of these members, the Pinnacle Overlook, Chadwell, and White Rocks Sandstone, are assigned to the Upper Mississippian Series because they intertongue with marine reddish or greenish shale and siltstone of the Pennington Formation or equivalent strata that contain a Late Mississippian fauna. The overlying quartzose sandstone members of the Lee commonly have coalified plant remains and impressions of plants and are Early to Middle Pennsylvanian in age; they are generally associated with terrestrial shale and siltstone containing coal beds and pinch out eastward into subgraywacke, siltstone, and shale. Although marine members commonly are bimodal, resultant transport directions for both marine and terrestrial members are southwesterly as determined by crossbedding. Thickness variations of the Middlesboro Member in the Cumberland overthrust sheet suggest that it represents tills of at least three major southwesterly trending paleovalleys. Thickness variations of the Bee Rock Sandstone Member east of Rocky Face fault and the combined Bee Rock and Naese Sandstone Members west of Rocky Face fault suggest that these members represent tills of at least two major southwesterly trending paleovalleys. East of Rocky Face fault, the Bee Rock is generally the uppermost member of the Lee; west of the fault, the overlying Naese is at the top. The Naese may range in age from Early to Middle Pennsylvanian and is partly or wholly equivalent to the Rockcastle Sandstone member of the Lee Formation in the area of the Pottsville Escarpment. The Mississippian-Pennsylvanian systemic boundary in the area of the Cumberland overthrust sheet in most places has been placed at an unconformity at the base of the Middlesboro Member; locally it is projected at the base of shales of the underlying Dark Ridge Member or equivalent strata in the Penningto

Professional Paper↗
USGS2001

Chlorine-36, bromide, and the origin of spring water

Natural ratios of chlorine-36 (36Cl) to stable chlorine (i.e., 36Cl/Cl ?? 10-15) vary in shallow groundwater of the United States from about 50 in coastal areas to about 1400 in the northern Rocky Mountains. Ratios lower than these indicate the presence of chloride (Cl-) that has been isolated from the atmosphere for hundreds of thousands of years, if not longer. Higher ratios, which can exceed 5000, usually originate from fallout from testing thermonuclear devices in the western Pacific in the 1950s. Natural mass ratios of chloride to bromide (Cl-/Br-) in precipitation vary in the United States from about 250 in coastal areas to about 50 in the north-central states. Lower ratios may suggest contamination from human sources. Higher ratios, which may exceed 2000, commonly reflect the dissolution of halite. Seawater has a Cl-/Br- ratio of 290. Both 36Cl and Cl-/Br- ratios have been measured in 21 samples of spring water collected from springs in 10 different states. Brackish water from Saratoga Springs area in New York has low values for both 36Cl and Cl-/Br- ratios. This indicates that a large component of the water has a very deep origin. Brackish water from Alexander Springs in Florida has a low 36Cl ratio but a high Cl-/Br- ratio similar to seawater. This suggests the addition of ancient seawater that may be trapped in the aquifer. Big Spring in Iowa discharges water with a very high Cl-/Br- ratio but a moderate 36Cl ratio. The high ratio of Cl-/Br- may be produced by dissolution of road salt or agricultural chemicals. Of the 21 springs sampled, only 10 appeared to have potable water not significantly affected by human activity. Chlorine-36 from testing of nuclear devices is still being flushed out of four of the spring systems that were sampled. Thus, more than 45 years have passed since 36Cl was introduced into the aquifers feeding the springs and the systems, as yet, have not been purged. Published by Elsevier Science B.V.

Chemical Geology↗
USGS2013

California State Waters Map Series: Offshore of Carpinteria, California

In 2007, the California Ocean Protection Council initiated the California Seafloor Mapping Program (CSMP), designed to create a comprehensive seafloor map of high-resolution bathymetry, marine benthic habitats, and geology within the 3-nautical-mile limit of California’s State Waters. The CSMP approach is to create highly detailed seafloor maps through collection, integration, interpretation, and visualization of swath sonar data, acoustic backscatter, seafloor video, seafloor photography, high-resolution seismic-reflection profiles, and bottom-sediment sampling data. The map products display seafloor morphology and character, identify potential marine benthic habitats, and illustrate both the surficial seafloor geology and shallow (to about 100 m) subsurface geology. The Offshore of Carpinteria map area lies within the central Santa Barbara Channel region of the Southern California Bight. This geologically complex region forms a major biogeographic transition zone, separating the cold-temperate Oregonian province north of Point Conception from the warm-temperate California province to the south. The map area is in the southern part of the Western Transverse Ranges geologic province, which is north of the California Continental Borderland. Significant clockwise rotation—at least 90°—since the early Miocene has been proposed for the Western Transverse Ranges province, and the region is presently undergoing north-south shortening. The small city of Carpinteria is the most significant onshore cultural center in the map area; the smaller town of Summerland lies west of Carpinteria. These communities rest on a relatively flat coastal piedmont that is surrounded on the north, east, and west by hilly relief on the flanks of the Santa Ynez Mountains. El Estero, a salt marsh on the coast west of Carpinteria, is an ecologically important coastal estuary. Southeast of Carpinteria, the coastal zone is narrow strip containing highway and railway transportation corridors and a few small residential clusters. Rincon Point is a well-known world-class surf break, and Rincon Island, constructed for oil and gas production, lies offshore of Punta Gorda. The steep bluffs backing the coastal strip are geologically unstable, and coastal erosion problems are ongoing in the map area; most notably, landslides in 2005 struck the small coastal community of La Conchita, engulfing houses and killing ten people. The Offshore of Carpinteria map area lies in the central part of the Santa Barbara littoral cell, whose littoral drift is to the east-southeast. Drift rates have been estimated to be about 400,000 tons/yr at Santa Barbara Harbor (about 15 km west of Carpinteria). At the east end of the littoral cell, eastward-moving sediment is trapped by Hueneme and Mugu Canyons and then transported to the deep-water Santa Monica Basin. Sediment supply to the western and central part of the littoral cell is largely from relatively small transverse coastal watersheds, which have an estimated cumulative annual sediment flux of 640,000 tons/yr. The much larger Ventura and Santa Clara Rivers, the mouths of which are about 25 to 30 km southeast of Carpinteria, yield an estimated 3.4 million tons of sediment annually, the coarser sediment load generally moving southeast, down the coast, and the finer sediment load moving both upcoast and offshore. The offshore part of the map area consists of a relatively flat and shallow continental shelf, which dips so gently (about 0.4° to 0.5°) that water depths at the 3-nautical-mile limit of California’s State Waters are 40 to 45 m. This part of the Santa Barbara Channel is relatively well protected from large Pacific swells from the north and northwest by Point Conception and from the south and southwest by offshore islands and banks. Fair-weather wave base is typically shallower than 20-m water depth, but winter storms are capable of resuspending fine-grained sediments in 30 m of water, and so shelf sediments in the map area probably are remobilized on an annual basis. The shelf is underlain by variable amounts of upper Quaternary shelf, estuarine, and fluvial sediments that thicken to the south. Seafloor habitats in the broad Santa Barbara Channel region consist of significant amounts of soft sediment and isolated areas of rocky habitat that support kelp-forest communities nearshore and rocky-reef communities in deep water. The potential marine benthic habitat types mapped in the Offshore of Carpinteria map area are directly related to its Quaternary geologic history, geomorphology, and active sedimentary processes. These potential habitats lie within the Shelf (continental shelf) megahabitat, dominated by a flat seafloor and substrates formed from deposition of fluvial and marine sediment during sea-level rise. This fairly homogeneous seafloor provides promising habitat for groundfish, crabs, shrimp, and other marine benthic organisms. The only significant interruptions to this homogeneous habitat type are the exposures of hard, irregular, and hummocky sedimentary bedrock and coarse-grained sediment where potential habitats for rockfish and related species exist.

California↗
USGS1966

Crustal study of a continental strip from the Atlantic Ocean to the Rocky Mountains

Twenty aeromagnetic profiles over a 100-mile-wide strip along the arc of a great circle passing through Denver, Colorado, and Washington, D. C, reveal large anomalies of major crustal significance. Contoured data disclose several areas of distinct magnetic patterns reflecting basement lithology and structure. The mafic rocks of the Blue Ridge and Piedmont and the Keweenawan mafic belt in Iowa and Nebraska give rise to strong linear trends. Areas with a more random pattern of closely spaced magnetic anomalies appear in central Ohio, eastern Iowa, and central and western Nebraska. Except in the Blue Ridge and Piedmont areas, crystalline basement rocks are covered by a thick blanket of virtually nonmagnetic sedimentary rocks, and lithology must be inferred from correlations of the magnetic data with scattered drill-hole data and regional gravity data. The area of highly magnetic rocks in central Ohio has a sharp western boundary that coincides with the western limit of metamorphism associated with the probable extension into Ohio of the Grenville province of Canada. This area and a similar one in eastern Iowa are linked by an arcuate, nearly continuous belt of positive gravity anomalies that extends north into Wisconsin and northern Michigan and then swings southeast across central Michigan. This horseshoe-shaped feature is associated with lithologically diverse but highly magnetic basement rocks. A group of linear magnetic anomalies in western Iowa and eastern Nebraska correlates with the well-known midcontinent gravity high. In Nebraska the magnetic data provide a basis for grouping the extremely complex drill-hole data into three over all lithologic terranes. An analysis of the long-wavelength (>40 miles) variations of the profiles shows that they form a number of large coherent anomalies, many of which show little relation to the major tectonic trends and lithologic patterns of the basement surface. The very broad and less numerous anomalies in the east, which have more or less north-south trends, are significantly different from the more numerous anomalies in the western part of the strip , which tend to trend east-west. One linear anomaly extends for nearly 500 miles across Nebraska and Iowa and may mark a zone of rifting. Heat-flow data show that rocks at the Curie point, which determines the depth below which rock magnetization cannot occur, may be deep enough, at least in shield and other stable parts of the continent, to include a part of the upper mantle. The concentration of the large magnetic features in Iowa and Nebraska may indicate that the thickness of magnetized rock is greater in this area and that perhaps some of these features originate in the upper mantle.

Geological Society of America Bulletin↗
USGS2006

Sedimentation in Goose Pasture Tarn, 1965-2005, Breckenridge, Colorado

Goose Pasture Tarn, a 771-acre-foot reservoir in Summit County, Colorado, is the principal domestic water-storage facility for the Town of Breckenridge and collects runoff from approximately 42 square miles of the upper Blue River watershed. In the 40 years since the reservoir was constructed, deltaic deposits have accumulated at the mouths of two perennial streams that provide most of the inflow and sediment to the reservoir. The Blue River is a low-gradient braided channel and transports gravel- to silt-size sediment. Indiana Creek is a steep-gradient channel that transports boulder- to silt-size sediment. Both deltas are composed predominantly of gravel, sand, and silt, but silt has been deposited throughout the reservoir. In 2004, the U.S. Geological Survey, in cooperation with the Town of Breckenridge, began a study to determine the volume of accumulated sediment in Goose Pasture Tarn, the long-term sedimentation rate for the reservoir, and the particle-size and chemical characteristics of the sediment. Exposed delta deposits occupied 0.91 acre and had an estimated volume of 0.6 acre-foot in 2005. Aerial photographic analysis indicated both the Blue River and Indiana Creek deltas grew rapidly during time intervals that included larger-than-average annual flood peaks on the Blue River. Sediment-transport relations could not be developed for the Blue River or Indiana Creek because of minimal streamflow and infrequently observed sediment transport during the study; however, suspended-sediment loads ranged from 0.02 to 1.60 tons per day in the Blue River and from 0.06 to 1.55 tons per day in Indiana Creek. Bedload as a percentage of total load ranged from 9 to 27 percent. New reservoir stage-area and stage-capacity relations were developed from bathymetric and topographic surveys of the reservoir bed. The original 1965 reservoir bed topography and the accumulated sediment thickness were estimated from a seismic survey and manual probing. The surface area of Goose Pasture Tarn in 2005 was 66.4 acres, and the reservoir capacity was 771.1 acre-feet at a full-pool elevation of 9,886.4 feet. The 1965 surface area was 67.1 acres, and the reservoir capacity was 818.0 acre-feet, indicating that the reservoir surface area has decreased by 0.7 acre, or about 1.1 percent, and the reservoir capacity has decreased by 46.9 acre-feet, or about 5.7 percent over a 40-year period. Sediment thickness determined with seismic profiling ranged from 0 to 4.0 feet and averaged 0.7 foot, with lesser thicknesses in the deeper parts of the reservoir and greater thicknesses near the deltas. Probe-determined sediment thickness ranged from 1.0 to 4.4 feet and averaged 2.8 feet near the Blue River delta and ranged from 0.3 to 6.0 feet and averaged 3.6 feet near the Indiana Creek delta. Approximately 47.5 acre-feet of sediment has accumulated in Goose Pasture Tarn and in the Blue River and Indiana Creek deltas, or an average of 1.19 acre-feet per year. Sediment cores from several locations in the reservoir showed stratification, which is indicative of different depositional dates or mechanisms. Metal and trace-constituent levels from the cores were compared with three standards. Silver, cadmium, europium, lead, and zinc were present in greater concentrations than Southern Rocky Mountain background levels in four sediment cores, and cadmium, lead, and zinc levels also were equal to or exceeded the Threshold Effect Concentration standards. Lead exceeded the Probable Effect Concentration standard in silt from the Blue River delta and deep water near the north shore. Tin was present in greater concentrations than Southern Rocky Mountain background levels in deep water near the east shore, and chromium and copper levels were equal to or exceeded the Threshold Effect Concentration standards in these cores.

Scientific Investigations Report↗
USGS1970

Volcanic history of the San Juan Mountains, Colorado, as indicated by potassium-argon dating

Volcanic rocks in the San Juan Mountains constitute the largest erosional remnant of a once nearly continuous volcanic field that extended over much of the southern Rocky Mountains and adjacent areas in Oligocene and later time. Recent regional studies have shown that the gross petrologic evolution throughout the San Juan remnant of this field was relatively simple, with initial intermediate lavas and breccias, followed closely in time by more silicic ash-flow tuffs, and ending with a bimodal association of basalt and rhyolite. More limited data from other remnants of the original field indicate a similar evolution. In the San Juan field, voluminous early lavas and breccias - mainly alkali andesite, rhyodacite, and mafic quartz latite - were erupted from numerous scattered central volcanoes onto an eroded tectonically stable terrane. They formed mostly during the interval 35 to 30 m.y. ago, but some probably were erupted earlier and others up to several million years later. About 30 m.y. ago, major volcanic activity changed to explosive ash-flow eruptions of quartz latite and low-silica rhyolite that persisted until about 26 m.y. ago. Source areas for the ash flows are marked by large calderas in the central and western San Juan Mountains. Two groups of lavas and associated rocks of intermediate composition intertongue with the ash-flow sequence: (1) quartz latitic lavas that were erupted in and adjacent to caldera structures and are genetically related to the ash-flow activity; and (2) other, generally more mafic lavas and related rocks that are widely distributed without evident structural relation to the ash-flow eruptive centers. The second group apparently represents a continuation of the early intermediate activity into the period of major ash-flow eruption. In the early Miocene the character of volcanism changed notably. Whereas the Oligocene volcanics are predominantly intermediate lavas and related silicic differentiates, the younger rocks are largely a bimodal association of basalt and high-silica alkali rhyolite. Basalt and minor rhyolite were erupted intermittently through the Miocene and Pliocene, and at one time formed a widespread thin veneer over the older volcanic terrane. The marked contrast between the Oligocene intermediate to low-silica rhyolitic magmas and the later basaltic and rhyolitic magmas implies either different conditions of magma generation or processes of differentiation for the two suites. This petrologic change coincides approximately in time with nearby development of the Rio Grande depression, a major rift that is the local expression of widespread late Cenozoic crustal extension. Whatever the cause of the petrologic change, the progression from predominantly intermediate to bimodal basalt-rhyolite volcanism, approximately concurrent with initiation of late Tertiary crustal extension, appears characteristic of Cenozoic volcanism for much of the western interior United States. © 1970, The Geological Society of America, Inc.

Colorado↗
USGS1961

Origin and development of the Three Forks Basin, Montana

The Three Forks Basin sprawls where the intricately deformed sedimentary and volcanic rocks of the Disturbed Belt along the Rocky Mountain front are faulted against the Precambrian metamorphic rocks that make the core of the Tobacco Root, Madison, Gallatin, and Beartooth ranges. Its eastern edge is linear, controlled by steep faults at the west front of the Bridger Range. All other boundaries are sinuous and show little sign of structural control. Tertiary deposits in the basin , rich in contemporaneous rhyolitic and latitic ash, are about equally of lake, bolson, and stream origin . The western part of the basin is dominated by moderately folded Eocene and lower Oligocene rocks, more than 2000 feet thick. They dip eastward beneath apparently unfolded upper Miocene and Pliocene rocks, more than 1300 feet thick, that also dip gently eastward to the basin edge. Thin but extensive Quaternary deposits lying unconformably on the Tertiary and pre-Tertiary rocks are mainly of rounded terrace and flood-plain gravel, angular fan gravel, and wind-blown silt. The basin began as part of an east-flowing stream system that developed in Late Cretaceous and Paleocene time, concurrently with Laramide folding and thrusting; the faulted contact between metamorphic and sedimentary rocks was especially erodible and became a main drainage way. Recurrent uplift to the west throughout the Tertiary provided gradient and load to the streams; additional load was provided by showers of ash from unknown vents. Relative uplifts of the Bridger Range in Eocene and early Oligocene time, and again in late Miocene and Pliocene time, impeded flow from the basin and led to deposits in channels, flood plains, and lakes. During most of Oligocene and Miocene time, however, the basin was being eroded. By the end of the Tertiary the basin was deeply filled and became part of a regional surface of low relief. Regional northwestward tilting stimulated headward erosion of the Missouri River which then captured the formerly east-draining or closed basin . The Tertiary deposits have been deeply eroded, and the rugged pre- basin surface partly exhumed.

Montana↗