Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Quaternary Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources
USGS2011

A refined characterization of the alluvial geology of yucca flat and its effect on bulk hydraulic conductivity

In Yucca Flat, on the Nevada National Security Site in southern Nevada, the migration of radionuclides from tests located in the alluvial deposits into the Paleozoic carbonate aquifer involves passage through a thick, heterogeneous section of late Tertiary and Quaternary alluvial sediments. An understanding of the lateral and vertical changes in the material properties of the alluvial sediments will aid in the further development of the hydrogeologic framework and the delineation of hydrostratigraphic units and hydraulic properties required for simulating groundwater flow in the Yucca Flat area. Previously published geologic models for the alluvial sediments within Yucca Flat are based on extensive examination and categorization of drill-hole data, combined with a simple, data-driven interpolation scheme. The U.S. Geological Survey, in collaboration with Stanford University, is researching improvements to the modeling of the alluvial section, incorporating prior knowledge of geologic structure into the interpolation method and estimating the uncertainty of the modeled hydrogeologic units.

Open-File Report↗
USGS1983

Chronology of late Pleistocene and Holocene volcanics, Long Valley and Mono Basin geothermal areas, eastern California

Hydration-rind ages based on hydration-rind thicknesses of obsidian and an assumed hydration rate of 5 microns /1000 yrs have been determined for the 26 exposed Mono domes and coulees. Hydration-rind thickness data give good estimates of relative age differences between the domes, but determination of absolute ages will depend upon calibration to radiometric ages. The first extrusion of highly differentiated, sparsely porphyritic rhyolite occurred an estimated 32,000 to 40,000 yrs ago and consists of a small dome at the northwest end of the contiguous chain. The next major extrusive event occurred about 24,000 yrs ago and is represented by two domes and a major tephra. About 10,000 yrs ago the frequency of eruptive activity increases and rhyolite lave was extruded at an average rate of 0.2 km3/1000 yrs; periods of dormancy ranging in length from 300 to 2000 yrs. About 2000 to 3000 yrs ago the rate of extrusion increased dramatically to 0.8 km3/1000 yrs beginning with the eruption of the South Coulee and its associated tephra. At the same time, the nature of erupted magma changed from sparsely porphyritic (3 to 10 per cent sanidine) to aphyric rhyolite. All eruptions since 2000 radiocarbon yrs BP have produced magma that is aphyric but is of the same chemical composition as the earlier porphyritic magma. Volumes of porphyritic and aphyric extrusives, each of which includes volumes of lava and volumes of pumiceous pyroclastics reduced for porosity, are nearly equal and together total about 4 km3. Projecting the recent rate of extrusion over the time since the last major eruption, 1185 radiocarbon yrs ago suggests that a future eruption in the Mono Chain could release as much as 1 km 3 of magma. The recent increase in extrusion rate and the contemporaneous change in the nature of the magma are attributed to an event in the magma chamber that allowed the release of hotter, more fluid, crystal-free magma. The young age for the beginning of rhyolite volcanism from the mono magma chamber suggests that rhyolite magma may have been emplaced in the shallow crust as recently as 32,000 to 40,000 yrs ago. Calculations by Lachenbruch et al. (1976, Jour. Geophys. Research, v. 81, p. 769-784) that a thermal disturbance at this age would have propagated upward by solid conduction only 4 km and offer an explanation for the lack of a heat-flow anomaly and surface indications of hydrothermal activity over the Mono magma chamber and its associated ring-fracture system. This report also contains new information on the age and chemistry of volcanics on the Mono Lake island, the Inyo domes, and tephras within the Long Valley Caldera. A newly discovered rhyolite tuff ring of late Quaternary age in the Toowa volcanic field of the southern Sierra Nevada is briefly described for it represents a new area that should be examined for potential as a geothermal area.

California↗
USGS1996

The 1992 M=7 Cape Mendocino, California, earthquake: Coseismic deformation at the south end of the Cascadia megathrust

We invert geodetic measurements of coseismic surface displacements to determine a dislocation model for the April 25, 1992, M = 7 Cape Mendocino, California, earthquake. The orientation of the model slip vector, which nearly parallels North America-Juan de Fuca relative plate convergence, and the location and orientation of the model fault relative to the offshore Cascadia megathrust, suggest that the 1992 Cape Mendocino earthquake is the first well-recorded event to relieve strain associated with the Cascadia subduction zone. We use data from three geodetic techniques: (1) the horizontal and vertical displacements of 13 monuments surveyed with the Global Positioning System, corrected for observed horizontal interseismic strain accumulation, (2) 88 section-elevation differences between leveling monuments, and (3) the uplift of 12 coastal sites observed from the die-off of intertidal marine organisms. Maximum observed displacements are 0.4 m of horizontal movement and 1.5 m of uplift along the coast. We use Monte Carlo techniques to estimate an optimal uniform slip rectangular fault geometry and its uncertainties. The optimal model using all the data resolves 4.9 m of slip on a 14 by 15 km fault that dips 28° SE. The fault extends from 1.5 to 8.7 km in depth and the main-shock hypocenter is close to the downdip projection of the fault. The shallowly dipping fault plane is consistent with the observed aftershock locations, and the estimated geodetic moment is 3.1 × 10 19 N m, 70% of the seismic moment. Other models that exclude leveling data collected in 1935 and 1942 are more consistent with seismological estimates of the fault geometry. If the earthquake is characteristic for this segment, the estimated horizontal slip vector compared with plate convergence rates suggests a recurrence interval of 140 years, with a 95% confidence range of 100–670 years. The coseismic uplift occurred in a region that also has high Quaternary uplift rates determined from marine terrace studies. If repeated ruptures of this southernmost segment of the Cascadia megathrust are responsible for the Quaternary uplift, a comparison of the coseismic uplift with coastal uplift rates suggests a recurrence interval of 200–400 years. Thus comparing horizontal and vertical coseismic to long-term deformation suggests a recurrence interval of about 100–300 years for M = 7 events at the south end of the Cascadia megathrust.

Journal of Geophysical Research B: Solid Earth↗
USGS1974

Chert derived from magadiite in a lacustrine deposit near Rome, Malheur County, Oregon

Nodules and thin beds of chert occur in the upper part of the informally named Rome beds, about 8 11 km southwest of Rome, Oreg. The chert is in green to gray mudstone, about 8 m beneath a conspicuous gray and yellow zeolitic tuff. The bedded chert contains molds of saline minerals and it grades southward and marginward into nodular chert. The nodular chert is of two varieties: relatively large lobate nodules that have greenish-brown interiors and abundant saline crystal molds, and relatively small lobate nodules that have gray interiors and a surface reticulation. The latter variety is the so-called snakeskin agate prized by lapidaries. Both nodular varieties characteristically have a thin white rind. The cherts are similar, if not identical, to cherts reported from Quaternary lacustrine deposits in eastern Africa and from Pleistocene to Jurassic lacustrine deposits in Wyoming. The Rome chert probably formed from a hydrous sodium silicate precursor such as magadiite during diagenesis. Magadiite is generally a primary precipitate from a highly alkaline lake which is capable of attaining a high concentration of silica in solution.

Oregon↗
USGS2013

The contributions of Donald Lee Johnson to understanding the Quaternary geologic and biogeographic history of the California Channel Islands

Over a span of 50 years, native Californian Donald Lee Johnson made a number of memorable contributions to our understanding of the California Channel Islands. Among these are (1) recognizing that carbonate dunes, often cemented into eolianite and derived from offshore shelf sediments during lowered sea level, are markers of glacial periods on the Channel Islands; (2) identifying beach rock on the Channel Islands as the northernmost occurrence of this feature on the Pacific Coast of North America; (3) recognizing of the role of human activities in historic landscape modification; (4) identifying both the biogenic and pedogenic origins of caliche “ghost forests” and laminar calcrete forms on the Channel Islands; (5) providing the first soil maps of several of the islands, showing diverse pathways of pedogenesis; (6) pointing out the importance of fire in Quaternary landscape history on the Channel Islands, based on detailed stratigraphic studies; and (7), perhaps his greatest contribution, clarifying the origin of Pleistocene pygmy mammoths on the Channel Islands, due not to imagined ancient land bridges, but rather the superb swimming abilities of proboscideans combined with lowered sea level, favorable paleowinds, and an attractive paleovegetation on the Channel Islands. Don was a classic natural historian in the great tradition of Charles Darwin and George Gaylord Simpson, his role models. Don’s work will remain important and useful for many years and is an inspiration to those researching the California Channel Islands today.

California↗
USGS2006

Geologic interpretation and multibeam bathymetry of the sea floor in southeastern Long Island Sound

Digital terrain models (DTMs) produced from multibeam echosounder (MBES) bathymetric data provide valuable base maps for marine geological interpretations (e.g. Todd and others, 1999; Mosher and Thomson, 2002; ten Brink and others, 2004; Poppe and others, 2006a,b). These maps help define the geological variability of the sea floor (one of the primary controls of benthic habitat diversity); improve our understanding of the processes that control the distribution and transport of bottom sediments, the distribution of benthic habitats and associated infaunal community structures; and provide a detailed framework for future research, monitoring, and management activities. The bathymetric survey interpreted herein (National Oceanic and Atmospheric Administration (NOAA) survey H11255) covers roughly 95 km? of sea floor in southeastern Long Island Sound (fig. 1). This bathymetry has been examined in relation to seismic reflection data collected concurrently, as well as archived seismic profiles acquired as part of a long-standing geologic mapping partnership between the State of Connecticut and the U.S. Geological Survey (USGS). The objective of this work was to use these geophysical data sets to interpret geomorphological attributes of the sea floor in terms of the Quaternary geologic history and modern sedimentary processes within Long Island Sound.

Open-File Report↗
USGS2013

Shallow geology, seafloor texture, and physiographic zones of the Inner Continental Shelf from Nahant to northern Cape Cod Bay, Massachusetts

The Massachusetts inner continental shelf between Nahant and northern Cape Cod Bay has been profoundly affected by the occupation and retreat of glacial ice sheets and relative sea-level change during the Quaternary. Marine geologic mapping of this area is a component of a statewide cooperative effort involving the U.S. Geological Survey and the Massachusetts Office of Coastal Zone Management. Interpretation of high-resolution geophysical data (interferometric and multibeam swath bathymetry, lidar, backscatter, and seismic reflection), sediment samples, and bottom photographs was used to produce a series of maps that describe the distribution and texture of seafloor sediments, shallow geologic framework, and physiographic zones of this inner-shelf region. These data and interpretations are intended to aid efforts to inventory and manage coastal and marine resources, and provide baseline information for research focused on coastal evolution and environmental change.

Massachusetts↗
USGS2025

Late Pleistocene kinematics of the Great Southern Puerto Rico Fault Zone, Puerto Rico

Several onshore faults in southern Puerto Rico have recently been recognized as Quaternary active. However, the kinematics of these faults, particularly any lateral component, remain largely unconstrained. It is difficult to characterize low strain‐rate faults, partially due to extensive erosional and anthropogenic landscape modification, steep relief, and frequent landsliding, limiting the preservation of geomorphic features that could serve as recorders of fault motion. Here, we constrain the kinematics along sections of the Great Southern Puerto Rico Fault Zone (GSPRFZ) on the southern coastal plain of Puerto Rico. We integrate ∼1‐m‐resolution light detection and ranging (lidar)‐derived topography, historical air photos, and field mapping to identify a series of ∼50–1200‐m‐long fault scarps and lineaments that trend northwest–southeast and extend for ≥25 km across the southern coastal plain. Fault scarps are primarily south facing, cut across topography, and displace Quaternary deposits and landforms. We document multiple offset geomorphic markers, including channel thalwegs and interfluves formed in deposits previously mapped as Quaternary piedmont alluvial plain. We observe both vertical (south‐side‐down) and right‐lateral meter‐scale displacements, which indicate that the GSPRFZ accommodates right‐lateral oblique motion in the late Pleistocene, consistent with northeast motion of the Puerto Rico and the Virgin Islands microplate away from the Hispaniola block.

Puerto Rico↗
USGS2003

Groundwater flow, heat transport, and water table position within volcanic edifices: Implications for volcanic processes in the Cascade Range

The position of the water table within a volcanic edifice has significant implications for volcano hazards, geothermal energy, and epithermal mineralization. We have modified the HYDROTHERM numerical simulator to allow for a free-surface (water table) upper boundary condition and a wide range of recharge rates, heat input rates, and thermodynamic conditions representative of continental volcano-hydrothermal systems. An extensive set of simulations was performed on a hypothetical stratovolcano system with unconfined groundwater flow. Simulation results suggest that the permeability structure of the volcanic edifice and underlying material is the dominant control on water table elevation and the distribution of pressures, temperatures, and fluid phases at depth. When permeabilities are isotropic, water table elevation decreases with increasing heat flux and increases with increasing recharge, but when permeabilities are anisotropic, these effects can be much less pronounced. Several conditions facilitate the ascent of a hydrothermal plume into a volcanic edifice: a sufficient source of heat and magmatic volatiles at depth, strong buoyancy forces, and a relatively weak topography-driven flow system. Further, the plume must be connected to a deep heat source through a pathway with a time-averaged effective permeability ???1 ?? 10-16 m2, which may be maintained by frequent seismicity. Topography-driven flow may be retarded by low permeability in the edifice and/or the lack of precipitation recharge; in the latter case, the water table may be relatively deep. Simulation results were compared with observations from the Quaternary stratovolcanoes along the Cascade Range of the western United States to infer hydrothermal processes within the edifices. Extensive ice caps on many Cascade Range stratovolcanoes may restrict recharge on the summits and uppermost flanks. Both the simulation results and limited observational data allow for the possibility that the water table beneath the stratovolcanoes is relatively deep.

Journal of Geophysical Research B: Solid Earth↗
USGS2001

Geologic map and digital database of the Porcupine Wash 7.5 minute Quadrangle, Riverside County, southern California

This data set maps and describes the geology of the Porcupine Wash 7.5 minute quadrangle, Riverside County, southern California. The quadrangle, situated in Joshua Tree National Park in the eastern Transverse Ranges physiographic and structural province, encompasses parts of the Hexie Mountains, Cottonwood Mountains, northern Eagle Mountains, and south flank of Pinto Basin. It is underlain by a basement terrane comprising Proterozoic metamorphic rocks, Mesozoic plutonic rocks, and Mesozoic and Mesozoic or Cenozoic hypabyssal dikes. The basement terrane is capped by a widespread Tertiary erosion surface preserved in remnants in the Eagle and Cottonwood Mountains and buried beneath Cenozoic deposits in Pinto Basin. Locally, Miocene basalt overlies the erosion surface. A sequence of at least three Quaternary pediments is planed into the north piedmont of the Eagle and Hexie Mountains, each in turn overlain by successively younger residual and alluvial deposits. The Tertiary erosion surface is deformed and broken by north-northwest-trending, high-angle, dip-slip faults and an east-west trending system of high-angle dip- and left-slip faults. East-west trending faults are younger than and perhaps in part coeval with faults of the northwest-trending set. The Porcupine Wash database was created using ARCVIEW and ARC/INFO, which are geographical information system (GIS) software products of Envronmental Systems Research Institute (ESRI). The database consists of the following items: (1) a map coverage showing faults and geologic contacts and units, (2) a separate coverage showing dikes, (3) a coverage showing structural data, (4) a scanned topographic base at a scale of 1:24,000, and (5) attribute tables for geologic units (polygons and regions), contacts (arcs), and site-specific data (points). The database, accompanied by a pamphlet file and this metadata file, also includes the following graphic and text products: (1) A portable document file (.pdf) containing a navigable graphic of the geologic map on a 1:24,000 topographic base. The map is accompanied by a marginal explanation consisting of a Description of Map and Database Units (DMU), a Correlation of Map and Database Units (CMU), and a key to point-and line-symbols. (2) Separate .pdf files of the DMU and CMU, individually. (3) A PostScript graphic-file containing the geologic map on a 1:24,000 topographic base accompanied by the marginal explanation. (4) A pamphlet that describes the database and how to access it. Within the database, geologic contacts , faults, and dikes are represented as lines (arcs), geologic units as polygons and regions, and site-specific data as points. Polygon, arc, and point attribute tables (.pat, .aat, and .pat, respectively) uniquely identify each geologic datum and link it to other tables (.rel) that provide more detailed geologic information.

California↗
USGS2018

Predicting geogenic arsenic in drinking water wells in glacial aquifers, north-central USA: Accounting for depth-dependent features

Chronic exposure to arsenic (As) via drinking groundwater is a human health concern worldwide. Probabilities of elevated geogenic As concentrations in groundwater were predicted in complex, glacial aquifers in Minnesota, north‐central USA, a region that commonly has elevated As concentrations in well water. Maps of elevated As hazard were created for depths typical of drinking water supply and with well construction attributes common for domestic wells. Conventional variables describing aquifer properties and materials, position on the hydrologic landscape, and soil geochemistry were among the most influential for predicting the probability of elevated As. We also found that certain well construction attributes were influential in predicting As hazard. Smaller distances between the top of the well screen and overlying aquitard (proximity) and shorter well screen lengths were each associated with higher probabilities of elevated As. Influential predictor variables, which are either mapped across the region or are well construction attributes, are proxies in the model for measurable physical or geochemical causes of elevated As (e.g., redox condition, till or aquifer sediment chemistry, and water chemistry), which are not mapped across the region. Our setting shares some important characteristics with deltaic and other high‐As aquifers in Southeast Asia: late Quaternary age, complex layering of coarse‐ and fine‐grained materials, low‐As sediment concentrations, and geochemical controls on As mobilization. Translating three‐dimensional geologic and geochemical understanding of As mobility to quantifiable variables for modeling with powerful, flexible statistical tools could improve predictions and help identify safer groundwater supply options in the USA, Southeast Asia, and elsewhere.

Minnesota↗
USGS2002

Cruise report RV Moana Wave Cruise M-1-02-GM bathymetry and acoustic backscatter of the mid and outer continental shelf, head of De Soto Canyon, northeastern Gulf of Mexico June 17, through July 9, 2002 Pensacola, FL to Pensacola, FL

The mid to outer continental shelf off Mississippi-Alabama and off northwest Florida were the focus of US Geological Survey (USGS) multibeam echosounder (MBES) mapping cruises in 2000 and 2001, respectively. These areas were mapped to investigate the extent of "deep-water reefs" first suggested by Ludwick and Walton (1957). The reefs off Mississippi and Alabama were initially described in water depths of 60 to 120 m (Ludwick and Walton, 1957) but the 2000 mapping found reef and hardgrounds to be much more extensive than previously thought (Gardner et al., 2001). The persistent trend of reef-like features along the outer shelf of Mississippi-Alabama suggested the trend might continue along the northwest Florida mid and outer shelf so a MBES-mapping effort was mounted in 2001 to test this suggestion. It is critical to determine the accurate location, geomorphology, and types of the ridges and reefs that occur in this region to understand the Quaternary history of the area and to assess their importance as benthic habitats for fisheries. The 2001 survey found a series of shelf-depth platforms with ridges (possibly reefs) constructed on their surfaces (Gardner et al., 2002). The area known as the "head of De Soto Canyon" is the large unmapped region between the 2000 and 2001 mapped areas. The head of De Soto Canyon is an outer shelf zone with a relatively steep western wall and a much gentler eastern wall. It was unknown prior to this cruise whether the reefs of the Mississippi-Alabama shelf continue eastward into the head of De Soto Canyon and connect with the ridges and reefs mapped on the northwest Florida outer shelf. The existence of carbonate-cemented latest Quaternary to Holocene sandstones along the western wall of the head of De Soto Canyon (Shipp and Hopkins, 1978; Benson et al., 1997; W.W. Schroeder, personnel comm., 2002) is of interest because of the potential benthic habitats they may represent. Precisely georeferenced high-resolution mapping of bathymetry is a fundamental first step in the study of an area suspected to be critical benthic habitats. Morphology is thought to be critical to define the distribution of dominant demersal plankton/planktivores communities. Community structure and trophodynamics of demersal fishes of the outer continental shelf of the northeastern Gulf of Mexico presently are focuses of a major USGS research project. A goal of the project is to answer questions concerning the relative roles played by morphology and surficial geology in controlling biological differentiation. Deep-water ridges, reefs, and outcrops are important because they are fish havens and key spawning sites, and are critical habitats for larval, juvenile, and economically important sport/food fishes.

Gulf of Mexico, head Of De Soto Canyon↗
USGS2010

Middle Jurassic through Quaternary metallogenesis and tectonics of northeast Asia, Chapter 8 in Metallogenesis and tectonics of northeast Asia

The major purposes of this chapter are to provide (1) an overview of the regional geology, tectonics, and metallogenesis of Northeast Asia for readers who are unfamiliar with the region, (2) a general scientific introduction to the succeeding chapters of this volume, and (3) an overview of the methodology of metallogenic and tectonic analysis used in this study. We also describe how a high-quality metallogenic and tectonic analysis, including construction of an associated metallogenic-tectonic model will greatly benefit other mineral resource studies, including synthesis of mineral-deposit models; improve prediction of undiscovered mineral deposit as part of a quantitative mineral-resource-assessment studies; assist land-use and mineral-exploration planning; improve interpretations of the origins of host rocks, mineral deposits, and metallogenic belts, and suggest new research. Research on the metallogenesis and tectonics of such major regions as Northeast Asia (eastern Russia, Mongolia, northern China, South Korea, and Japan) and the Circum-North Pacific (the Russian Far East, Alaska, and the Canadian Cordillera) requires a complex methodology including (1) definitions of key terms, (2) compilation of a regional geologic base map that can be interpreted according to modern tectonic concepts and definitions, (3) compilation of a mineral-deposit database that enables a determination of mineral-deposit models and clarification of the relations of deposits to host rocks and tectonic origins, (4) synthesis of a series of mineral-deposit models that characterize the known mineral deposits and inferred undiscovered deposits in the region, (5) compilation of a series of metallogenic-belt belts constructed on the regional geologic base map, and (6) construction of a unified metallogenic and tectonic model. The summary of regional geology and metallogenesis presented here is based on publications of the major international collaborative studies of the metallogenesis and tectonics of Northeast Asia that have been led by the U.S. Geological Survey (USGS). These studies have produced two broad types of publications (1) a series of regional geologic, mineral-deposit, and metallogenic-belt maps, with companion descriptions of the region, and (2) a suite of metallogenic and tectonic analyses of the same region. The study area consists of eastern Russia (most of eastern Siberia and the Russian Far East), Mongolia, northern China, South Korea, Japan, and adjacent offshore areas. The major cooperative agencies are the Russian Academy of Sciences; the Academy of Sciences of the Sakha Republic (Yakutia); VNIIOkeangeologia and Ministry of Natural Resources of the Russian Federation; the Mongolian Academy of Sciences; the Mongolian University of Science and Technology; the Mongolian National University; Jilin University, Changchun, People?s Republic of China, the China Geological Survey; the Korea Institute of Geosciences and Mineral Resources; the Geological Survey of Japan/AIST; the University of Texas, Arlington, and the U.S. Geological Survey (USGS). This study builds on and extends the data and interpretations from a previous project on the Major Mineral Deposits, Metallogenesis, and Tectonics of the Russian Far East, Alaska, and the Canadian Cordillera conducted by the USGS, the Russian Academy of Sciences, the Alaska Division of Geological and Geophysical Surveys, and the Geological Survey of Canada. The major products of this project were summarized by Naumova and others (2006) and are described in appendix A.

Professional Paper↗
USGS2012

Age estimates and uplift rates for late Pleistocene marine terraces: Southern Oregon portion of the Cascadia forearc

Interest in the Cascadia subduction zone has increased because recent investigations have suggested that slip along plates at certain types of convergent margins is characteristically accompanied by large earthquakes. In addition, other investigations have suggested that convergent margins can be broadly classified by the magnitude of their uplift rates. The authors generated new uranium series, amino acid, and stable isotope data for southern Oregon marine terrace fossils. These data, along with terrace elevations and two alternative estimates of sea level at the time of terrace formation, allow one to determine terrace ages and uplift rates. Uranium series analysis of fossil coral yields an age of 83 {plus minus} 5 ka for the Whisky Run terrace at Coquille Point in Bandon, Oregon. A combination of amino acid and oxygen isotope data suggest ages of about 80 and 105 ka for the lowest two terraces at Cape Blanco. These ages indicate uplift rates of 0.45-1.05 and 0.81-1.49 m/kyr for Coquille Point and Cape Blanco, respectively. In order to assess the utility of the southern Oregon uplift rates for predicting the behavior of the Cascadia subduction zone, the authors compared late Quaternary uplift rates derived from terrace data from subduction zones around the world. On the basis of this comparison the southern Oregon rates of vertical deformation are not usually high or low. Furthermore, late Quaternary uplift rates show little relationship to the type of convergent margin. In the case of the southern Oregon coast, variability in uplift rate probably reflects local structures in the overriding plate, and the rate of uplift cannot be used as a simple index of the potential for great earthquakes along the southern Cascadia subduction zone.

California, Oregon↗
USGS2012

Late Cenozoic volcanism, geochronology, and structure of the Coso Range, Inyo County, California

The Coso Range lies at the west edge of the Great Basin, adjacent to the southern part of the Sierra Nevada. A basement complex of pre‐Cenozoic plutonic and metamorphic rocks is partly buried by ∼35 km 3 of late Cenozoic volcanic rocks that were erupted during two periods, as defined by K‐Ar dating: (1) 4.0–2.5 m.y., ∼31 km 3 of basalt, rhyodacite, dacite, andesite, and rhyolite, in descending order of abundance, and (2) ≤1.1 m.y., nearly equal amounts of basalt and rhyolite, most of the rhyolite being ≤0.3 m.y. old. Vents for the volcanic rocks of the younger period are localized on and near a horst of basement rocks within a concavity defined by the distribution of vents of the older period. The alignment of many vents and the presence of a considerable number of roughly north‐trending normal faults of late Cenozoic age reflect basin and range tectonics dominated by roughly east‐west lithospheric extension. Fumaroles, intermittently active thermal springs, and associated altered rocks occur within and immediately east of the central part of the field of Quaternary rhyolite, in an area characterized by various geophysical anomalies that are evidently related to an active hot‐water geothermal system. This system apparently is heated by a reservoir of silicic magma at ≥8‐km depth, itself produced and sustained through partial melting of crustal rocks by thermal energy contained in mantle‐derived basaltic magma that intrudes the crust in response to lithospheric extension.

California↗
USGS2008

Sidescan-sonar imagery and surficial geologic interpretations of the sea floor in central Rhode Island Sound

The U.S. Geological Survey (USGS) has been working with the National Oceanic and Atmospheric Administration (NOAA) to interpret the surficial geology of areas along the northeastern coast of the United States. During 2004, the NOAA Ship RUDE conducted Hydrographic Survey H11321 in Rhode Island Sound. This sidescan-sonar and bathymetry survey covers an area of 93 km? located 12 km southeast of Brenton Point, RI in water depths of 28-39 m (fig. 1). The purpose of this report is to delineate sea floor features and sedimentary environments of this area in central Rhode Island Sound using sidescan-sonar and bathymetric data from NOAA Survey H11321 and seismic-reflection data from a previous USGS field study (Needell and others, 1983a). This is important for the study of benthic habitats and provides a framework for future research. Prior work in this area includes the mapping of surface sediments and surficial geology. McMaster (1960) collected sediment samples from Rhode Island Sound and Narragansett Bay and mapped our study area as having a sandy sea floor. In addition, one sample of sand from the National Ocean Service (NOS) Hydrographic Database came from a location in the northeast part of our study area in 1939 (fig. 2; Poppe and others, 2003). McMaster and others (1968) used seismic-reflection profiles to map the locations of a cuesta of Cretaceous sediments crossing Rhode Island Sound and post-Cretaceous drainage channels. Knebel and others (1982) identified sedimentary environments in Rhode Island Sound using sidescan sonographs. Needell and others (1983b) studied the Quaternary geology and mapped the structure, sedimentary environments, and geologic hazards in Rhode Island Sound using sidescan-sonar and seismic-reflection data. Sidescan-sonar and bathymetric data from NOAA Survey H11320, which overlaps the far eastern edge of our study area, was interpreted to consist of basins surrounded by a moraine and bathymetric highs composed of till with areas of rocks, sand waves, hummocks, glaciolacustrine erosional outliers, small scarps and elongate hills (fig. 1; McMullen and others, 2007). Some of those features extend into this study area.

Rhode Island↗
USGS1980

Results and assessment of uranium series dating of vertebrate fossils from Quaternary alluvium in Colorado

An average uranium-series age of 102,000 ± 14,000 yr for bones from Louviers Alluvium, near Denver, Colorado, is compatible with the inferred geologic age of from 120,000 to 150,000 yr. A uranium-series date of about 190,000 yr for a bone from Slocum Alluvium, near Canon City, Colorado, is consistent with the inferred geologic age of from 150,000 to 260,000 yr. Age determinations for the Broadway Alluvium are inconsistent but its geologic age is considered to be 15,000 to 30,000 yr BP.

Colorado↗
USGS2012

Seismicity and volcanism in the Pacific Northwest: Evidence for the segmentation of the Juan De Fuca Plate

The distributions of earthquakes and late Cenozoic and Quaternary volcanism in Washington and northern Oregon change markedly across two northeast-striking lines, one near Mount Rainier and one near Mount Hood. On the basis of these observations and a comparison with the Nazca subduction zone, we propose that the Juan de Fuca subduction zone is divided into two segments. Landward of the coastal thrust zone, we suggest the Juan de Fuca plate dips more steeply beneath the southern segment than beneath the northern segment.

Geophysical Research Letters↗