Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Modern Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources
USGS1978

Remote-sensing and subsurface definition of facies and structure related to uranium deposits, Powder River Basin, Wyoming

Computer-enhanced Landsat images of the southern Powder River Basin have been used to define facies and linear structural features within the Wasatch Formation. The facies distribution is detectable primarily because of a relation of vegetation density and type to the local substrate. The surface indications of facies are confirmed by sandstone/ mudstone ratios determined from logs of abundant exploration drill holes. These newly defined geologic features are spatially related to known uranium mineral occurrences and are believed to be related to mineralization in the following ways. (1) Major uranium occurrences are virtually restricted to an intermediate grain-size facies of the Wasatch, probably marking the axial zone of the depositional basin. (2) The axial zone is also marked by a change from one structural lineament domain to another, and the structures may have influenced details of fluvial-system patterns and sedimentation and (subsequently) the flow of uranium-bearing ground water. (3) A recently active linear structure may mark the current basin axis; it appears to have some relationship both to groundwater chemistry and the distribution of uranium occurrences, suggesting structural influence on relatively modern ground-water transport and uranium deposition. © 1978 Society of Economic Geologists, Inc.

Wyoming↗
USGS2010

New York-Alabama lineament: A buried right-slip fault bordering the Appalachians and mid-continent North America

The New York-Alabama (NY-AL) lineament , recognized in 1978, is a magnetic anomaly that delineates a fundamental though historically enigmatic crustal boundary in eastern North America that is deeply buried beneath the Appalachian basin. Data not in the original aeromagnetic data set, particularly the lack of any information available at the time to constrain the southern continuation of the anomaly southwest of Tennessee, left the source of the lineament open to conjecture. We use modern digital aeromagnetic maps to fill in these data gaps and, for the first time, constrain the southern termination of the NY-AL lineament . Our analysis indicates that the lineament reflects a crustal-scale, right-lateral strike-slip fault that has displaced anomalies attributed to Grenville orogenesis by ~220 km. Palinspastic restoration of this displacement rearranges the trace of the Grenville belt in southern Rodinia and implies only passive influence on later-formed Appalachian structures. The precise timing of dextral movement on the NY-AL structure is not resolvable from the existing data set, but it must have occurred during one of, or combinations of, the following events: (1) a late, postcontractional (post-Ottawan) stage of the Grenville orogeny; (2) late Neoproterozoic to Cambrian rifting of Laurentia; or (3) right-slip reactivation during the late Neoproterozoic-Cambrian rifting of Laurentia, or during Appalachian movements. Our palinspastic reconstruction also implies that the host rocks for modern earthquakes in the Eastern Tennessee Seismic Zone are metasedimentary gneisses, and it provides an explanation for the spatial location and size of the seismic zone. © 2010 Geological Society of America.

New York, Pennsylvania, Ohio, Kentucky, Tennessee,↗
USGS1969

Modern coastal mangrove swamp stratigraphy and the ideal cyclothem

The general stratigraphy of the “ideal” cyclothem of Late Paleozoic age can be recognized in a modern succession of sedimentary units underlying the coastal mangrove swamps of southwestern Florida. Because coal deposition is associated with the formation of cyclothems, this stratigraphic similarity has geologic importance with respect to coal formation. The lower part of the succession in Florida consists of nonmarine sediments, the middle part of brackish-water or fresh-water mangrove peat, and the upper part of brackish-water and marine units. This sequence of sediments records a relative rise in sea level. In comparison, the lower part of the ideal cyclothem consists basically of nonmarine units, the central sedimentary member is coal, and the upper units are brackish-water and marine sediments. The ideal cyclothem is thought to have formed in part in a deltaic environment and to record a periodic fluctuation in terrigenous sediment supply and a relative rise in sea level. In contrast, southwestern Florida has essentially no deltas, as most of its paralic sediments are derived from coastal sources. In view of this, the stratigraphic similarity noted above must reflect a partial duplication of sedimentary environments brought about by a relative rise in sea level across a low coastal platform supporting peat-depositing paralic and fresh-water swamps and forests. This conclusion tends to support the point of view that the coal member of some cyclothems formed in a swampy environment penecontemporaneously with a relative rise in sea level. The coal member, therefore, is in part a transgressive unit.

Florida↗
USGS2012

Apalachicola Bay interpreted seismic horizons and updated IRIS chirp seismic-reflection data

Apalachicola Bay and St. George Sound contain the largest oyster fishery in Florida, and the growth and distribution of the numerous oyster reefs here are the combined product of modern estuarine conditions and the late Holocene evolution of the bay. A suite of geophysical data and cores were collected during a cooperative study by the U.S. Geological Survey, the National Oceanic and Atmospheric Administration Coastal Services Center, and the Apalachicola National Estuarine Research Reserve to refine the geology of the bay floor as well as the bay's Holocene stratigraphy. Sidescan-sonar imagery, bathymetry, high-resolution seismic profiles, and cores show that oyster reefs occupy the crests of sandy shoals that range from 1 to 7 kilometers in length, while most of the remainder of the bay floor is covered by mud. The sandy shoals are the surficial expression of broader sand deposits associated with deltas that advanced southward into the bay between 6,400 and 4,400 years before present. The seismic and core data indicate that the extent of oyster reefs was greatest between 2,400 and 1,200 years before present and has decreased since then due to the continued input of mud to the bay by the Apalachicola River. The association of oyster reefs with the middle to late Holocene sandy delta deposits indicates that the present distribution of oyster beds is controlled in part by the geologic evolution of the estuary.

Florida↗
USGS2022

A study on the effect of site response on California seismic hazard map assessment

Prior studies have repeatedly shown that probabilistic seismic hazard maps from several different countries predict higher shaking than that observed. Previous map assessments have not, however, considered the influence of site response on hazard. Seismologists have long acknowledged the influence of near-surface geology, in particular low-impedance sediment layers, on earthquake ground-motion at frequencies of engineering concern. Although the overall effects of site response are complex, modern ground-motion models (GMMs) account for site effects using terms based on V S30 , the time-averaged shear-wave velocity in the upper 30 m of the Earth’s surface. In this study, we consider general implications of incorporating site terms from modern GMMs using site-specific V S30 as a proxy in probabilistic seismic hazard maps for California. At the long periods (1–5 s) that affect tall buildings, site terms amplify the mapped hazard by factors of 1–3 at many sites relative to maps calculated for the standard reference soft-rock site condition, V S30 = 760 m/s. However, at the short periods of ground-motion that are the main contributors to peak ground acceleration (PGA) and thus affect smaller structures, only negligible effects occur due to nonlinear deamplification of strong ground-motion at high frequencies. Nonlinear deamplification increases as the shaking level increases. For very strong shaking, deamplification can overcome the linear amplification, yielding net deamplification. We explore the implications of these results for the evaluation of hazard maps. Because site effects do not change the maps appreciably at short periods, we can exclude site response as an explanation for why the maps overpredict historically observed shaking as captured by the California Historical Intensity Mapping Project (CHIMP) dataset. The results are expected to be generalizable to regions that are comparable to California in terms of structure and seismicity rates. In low-to-moderate-seismicity regions where the hazard reflects weaker shaking, nonlinear site response is expected to be less important for the hazard.

California↗
USGS1996

Seafloor environments in Cape Cod Bay, a large coastal embayment

Cape Cod Bay is a glacial, semi-enclosed embayment that has a patchy distribution of modern seafloor sedimentary environments of erosion or nondeposition, deposition, and sediment reworking. Sidescan-sonar records and supplemental bathymetric, sedimentary, subbottom, and physical-oceanographic data indicate that the characteristics and distribution of these three categories of bottom environments are controlled by a combination of geologic and oceanographic processes that range from episodic to long-term and from regional to local. (1) Environments of erosion or nondeposition comprise exposures of bedrock, glacial drift, and coarse lag deposits that contain sediments (where present) ranging from boulder fields to gravelly coarse-to-medium sands. These environments are dominant on the shallow margins of the bay (water depths < 30 m) where they reflect sediment resuspension, winnowing, and transport during modern northerly storms. (2) Environments of deposition are blanketed by fine-grained sediments ranging from muds to muddy fine sands. These environments are dominant across the floor of the central basin (water depths = 30–60 m) where fine-grained sediments (derived from regional and local sources and emplaced primarily during episodic wind- and density-driven flow) settle through the water column and accumulate under weak bottom currents during nonstorm conditions. (3) Environments of sediment reworking contain patches with diverse textures ranging from gravelly sands to muds. These environments occupy much of the transitional slopes between the margins and the basin floor and reflect a combination of erosion and deposition. The patchy distribution of sedimentary environments within the bay reflects not only regional changes in processes between the margins and the basin but local changes within each part of the bay as well. Small-scale patchiness is caused by local changes in the strengths of wave- and wind-driven currents and (on the margins) by local variations in the supply of fine-grained sediments. This study indicates areas within Cape Cod Bay where fine-grained sediments and associated contaminants are likely to be either moved or deposited. It also provides a guide to the locations and variability of benthic habitats.

Cape Cod Bay↗
USGS2011

Playa-lake sedimentation and organic matter accumulation in an Andean piggyback basin: The recent record from the Cuenca de Pozuelos, NW Argentina

Expansive playa‐lake systems situated in high‐altitude piggyback basins are important and conspicuous components of both modern and ancient cordilleran orogenic systems. Extant playa lakes provide vital habitat for numerous endemic species, whereas sediments from these deposystems may record signals of climate change or develop natural resources over geological time. Laguna de los Pozuelos (North‐west Argentina) provides the opportunity for an actualistic sedimentological and geochemical assessment of a piggyback basin playa lake in an area of critical interest for understanding Quaternary palaeoclimate dynamics. Silty clays and diatom ooze are the dominant playa‐lake centre microfacies, with concentrations of total organic carbon and biogenic silica commonly exceeding 1·5 wt% in this sub‐environment. Elemental and stable isotopic analyses point to a mixed organic matter composition in the playa‐lake centre, with substantial contributions from algae and transported aquatic macrophytes. Bulk sediment and organic mass accumulation rates in the southern playa‐lake centre approach 0.22g cm −2 year −1 and 2.89 mg cm −2 year −1 , respectively, indicating moderately rapid deposition with negligible deflation over historic time. Playa margin facies contain higher percentages of fragmented biogenic carbonate (ostracods and charophytes) and inorganically precipitated aragonite crusts due to seasonal pumping and evaporation of ground water. Organic matter accumulation is limited along these heavily bioturbated wet and dry mud flats. Fluvial–lacustrine transitional environments, which are key waterbird habitats, are either silty terminal splay (northern axis) or sandy deltas (southern axis) containing highly oxidized and partially allochthonous organic matter. Modern analogue data from Laguna de los Pozuelos provide key insights for: (i) environmental reconstructions of ancient lake sequences; and (ii) improving facies models for piggyback basins.

Cuenca de Pozuelos↗
USGS2019

Rare earth elements in coal and coal fly ash

The rare earth elements (REEs) are a group of 17 elements sharing similar chemical properties. They include yttrium (Y, atomic number 39), scandium (Sc, atomic number 21), and the 15 elements of the lanthanide series, atomic numbers 57 (lanthanum, La) to 71 (lutetium, Lu). Because promethium (Pm, atomic number 61) does not occur in the Earth’s crust and scandium typically has different geological occurrences from other REEs, they are not discussed further herein. REEs are, on average, more abundant than precious metals (for example, gold, silver, and platinum), but because of their unique geochemical properties, they do not commonly form economically viable ore deposits. Nevertheless, REEs are increasingly required for a range of modern applications in defense and renewable energy technologies and in commercial products, primarily as magnets, batteries, and catalysts. The United States currently (2018) produces REEs from a single mine in California, accounting for just 9 percent of global production, whereas 70 percent of global REE production comes from China. For these reasons, REEs are considered a critical resource, and the U.S. Geological Survey (USGS) has an interest in helping to identify new sources of REEs for domestic production. In 2017, coal use accounted for about 30 percent of the electric power generated in the United States. Fly ash, produced during the burning of coal, is a fine­-grained solid derived from noncombustible constituents of coal, such as clay minerals and quartz. When coal is burned, REEs are retained and enriched in the fly ash and, as a result, fly ash has long been considered a potential resource for REEs. The United States has the world’s largest coal reserves and, even though gas-­fired power generation has increased significantly in the last decade, the United States continues to produce vast quantities of fly ash, about half of which is beneficially reused, primarily in construction materials. The remainder is stored, mostly in landfills and impound­ments. Thus, annual fly ash production, combined with fly ash already in stor­age, constitutes a large potential resource. Research into how to utilize coal and coal fly ash as sources of REEs is ongo­ing. Viable recovery of REEs from coal and coal ash requires identification of coals and ashes with the highest REE concentrations and development of workable methods for REE extraction and recovery. Understanding how REEs occur within fly ash, described in this fact sheet, is one of the keys to developing possible methods for their recovery.

Fact Sheet↗
USGS2015

Geology and hydrocarbon potential of the Dead Sea Rift Basins of Israel and Jordan

Following its middle Miocene inception, numerous basins of varying lengths and depths developed along the Dead Sea fault zone, a large continental transform plate boundary. The modern day left-lateral fault zone has an accumulated left-lateral offset of 105 to 110 km (65 to 68 mi). The deepest basin along the fault zone, the Lake Lisan or Dead Sea basin, reaches depths of 7.5 to 8.5 km (24,500 ft to 28,000 ft), and shows evidence of hydrocarbons. The basins are compartmentalized by normal faulting associated with rapid basin subsidence and, where present, domal uplift accompanying synrift salt withdrawal. The stratigraphy of the fault zone is composed of a thick pre-wrench interval of early Tertiary to Precambrian strata overlain by a syn-wrench section of Miocene to Recent sediments. The main potential source rock is the pre-wrench Cretaceous Maastrichtian Ghareb Formation (and equivalents), which has a total organic carbon (TOC) content measurement of 8 to 18%. Lesser potential source rocks may also be found in the Pleistocene, Cretaceous (Turonian), Jurassic (Oxfordian&ndash;Callovian), and Triassic (Ladinian&ndash;Carnian). Geochemical analyses indicate that the source of all oils, asphalts, and tars recovered in the Lake Lisan basin is the Ghareb Formation. Geothermal gradients along the Dead Sea fault zone vary from basin to basin. Syn-wrench potential reservoir rocks are highly porous and permeable, whereas pre-wrench strata commonly exhibit lower porosity and permeability. Biogenic gas has been produced from Pleistocene reservoirs. Potential sealing intervals may be present in Neogene evaporites and tight lacustrine limestones and shales. Simple structural traps are not evident; however, subsalt traps may exist. Unconventional source rock reservoir potential has not been tested.

GCSSEPM Foundation Perkins-Rosen Research Conferen↗
USGS2002

Nearshore morphology and late Quaternary geologic framework of the northern Monterey Bay Marine Sanctuary, California

A combination of side-scanning sonar and high-resolution seismic reflection data image seafloor bedrock exposures and erosional features across the nearshore shelf. Sediment-filled troughs incise the inner shelf rock exposures and tie directly to modern coastal streams. The resulting bedrock geometry can be related to its resistance to erosion. Comparison of the depth of the transgressive erosional surface to recently developed sea level curves suggests a period of slow sea level rise during the early stages of post-interglacial marine transgression. The slow rise of sea level suggests an erosional episode that limited the preservation of buried paleo-channels beyond 70 m water depth. Seafloor features suggest that localized faulting in the area may have influenced the morphology of bedrock exposures and the coastline. ?? 2002 Elsevier Science B.V. All rights reserved.

Marine Geology↗
USGS2020

Late Quaternary evolution and stratigraphic framework influence on coastal systems along the north-central Gulf of Mexico, USA

Coastal systems in the Gulf of Mexico are threatened by reduced sediment supply, storm impacts and relative sea-level rise (RSLR). The geologic record provides insight into geomorphic evolution thresholds to these forcing mechanisms to help predict future barrier evolution in response to climate change. This study synthesizes ∼2100 km of geophysical data, 700 + sediment cores, and 62 radiocarbon dates to regionally map two lowstand sequence boundaries, multiple ravinement surfaces and fourteen depositional facies demonstrating stratigraphic and antecedent topographic influences on coastal evolution. The Mississippi-Alabama (MSAL) barriers are anchored by a marine isotope stage (MIS) 5e section of Dauphin Island coupled with an MIS 2 surface gradient change. Sand for the modern MSAL barriers were largely sourced through Holocene transgressive ravinement of relict valley fill deposits, providing up to 300 × 106 m3 of sand. Mud-filled MIS 2 tributaries correspond to areas of repeated storm breaching or tidal inlets. A Holocene geomorphic evolutionary model was created for Petit Bois and Dauphin Islands, highlighting RSLR rates, changes in sediment supply and the antecedent geologic framework. As the MIS 2 surface was flooded, tidal/wave scour supplied sand to migrating marine shoals. These transgressing shoals converted drowned paleovalleys to estuaries ∼9ka BP. Islands formed in their modern positions ∼6ka BP, when sediment supply was high and RSLR rates were 2 mm/yr. Between ∼4ka-1750 CE, islands prograded from reduced RSLR rates of 1-0.4 mm/yr and sufficient sand supply from alongshore/inner shelf sources. Currently, the islands experience 3.74 mm/yr of RSLR and reduced sediment supply, resulting in barrier degradation.

Alabama, Mississippi↗
USGS2017

Hypogene caves of the central Appalachian Shenandoah Valley in Virginia

Several caves in the Shenandoah Valley in Virginia show evidence for early hypogenic conduit development with later-enhanced solution under partly confined phreatic conditions guided by geologic structures. Many (but not all) of these caves have been subsequently invaded by surface waters as a result of erosion and exhumation. Those not so affected are relict phreatic caves, bearing no relation to modern drainage patterns. Field and petrographic evidence shows that carbonate rocks hosting certain relict phreatic caves were dolomitized and/or silicified by early hydrothermal fluid migration in zones that served to locally enhance rock porosity, thus providing preferential pathways for later solution by groundwater flow, and making the surrounding bedrock more resistant to surficial weathering to result in caves that reside within isolated hills on the land surface. Features suggesting that deep phreatic processes dominated the development of these relict caves include (1) cave passage morphologies indicative of ascending fluids, (2) cave plans of irregular pattern, reflecting early maze or anastomosing development, (3) a general lack of cave breakdown and cave streams or cave stream deposits, and (4) calcite wall and pool coatings within isolated caves intersecting the local water table, and within unroofed caves at topographic locations elevated well above the lo cal base level. Episodes of deep karstification were likely separated by long periods of geologic time, encompassing multiple phases of sedimentary fill and excavation within caves, and reflect a complex history of deep fluid migration that set the stage for later shallow speleogenesis that continues today.

Virginia↗
USGS2009

Compositions of modern dust and surface sediments in the Desert Southwest, United States

Modern dusts across southwestern United States deserts are compositionally similar to dust-rich Av soil horizons (depths of 0-0.5 cm and 1-4 cm at 35 sites) for common crustal elements but distinctly different for some trace elements. Chemical compositions and magnetic properties of the soil samples are similar among sites relative to dust sources, geographic areas, and lithologic substrates. Exceptions are Li, U, and W, enriched in Owens Valley, California, and Mg and Sr, enriched in soils formed on calcareous fan gravel in southeast Nevada. The Av horizons are dominated by dust and reflect limited mixing with substrate sediments. Modern dust samples are also similar across the region, except that Owens Valley dusts are higher in Mg, Ba, and Li and dusts both there and at sites to the north on volcanic substrates are higher in Sb and W. Thus, dust and Av horizons consist of contributions from many different sources that are well mixed before deposition. Modern dusts contain significantly greater amounts of As, Cd, Cr, Cu, Ni, Pb, and Sb than do Av horizons, which record dust additions over hundreds to thousands of years. These results suggest that modern dust compositions are influenced by anthropogenic sources and emissions from Owens (dry) Lake after its artificial desiccation in 1926. Both modern dusts and Av horizons are enriched in As, Ba, Cu, Li, Sb, Th, U, and W relative to average crustal composition, which we interpret to indicate that the geologic sources of dust in the southwestern United States are geochemically distinctive.

Journal of Geophysical Research F: Earth Surface↗
USGS2020

Interpreting and reporting 40Ar/39Ar geochronologic data

The 40 Ar/ 39 Ar dating method is among the most versatile of geochronometers, having the potential to date a broad variety of K-bearing materials spanning from the time of Earth’s formation into the historical realm. Measurements using modern noble-gas mass spectrometers are now producing 40 Ar/ 39 Ar dates with analytical uncertainties of ∼0.1%, thereby providing precise time constraints for a wide range of geologic and extraterrestrial processes. Analyses of increasingly smaller subsamples have revealed age dispersion in many materials, including some minerals used as neutron fluence monitors. Accordingly, interpretive strategies are evolving to address observed dispersion in dates from a single sample. Moreover, inferring a geologically meaningful “age” from a measured “date” or set of dates is dependent on the geological problem being addressed and the salient assumptions associated with each set of data. We highlight requirements for collateral information that will better constrain the interpretation of 40 Ar/ 39 Ar data sets, including those associated with single-crystal fusion analyses, incremental heating experiments, and in situ analyses of microsampled domains. To ensure the utility and viability of published results, we emphasize previous recommendations for reporting 40 Ar/ 39 Ar data and the related essential metadata, with the amendment that data conform to evolving standards of being findable, accessible, interoperable, and reusable (FAIR) by both humans and computers. Our examples provide guidance for the presentation and interpretation of 40 Ar/ 39 Ar dates to maximize their interdisciplinary usage, reproducibility, and longevity.

GSA Bulletin↗
USGS2014

Sea-floor geology in northwestern Block Island Sound, Rhode Island

Multibeam-echosounder and sidescan-sonar data, collected by the National Oceanic and Atmospheric Administration in a 69-square-kilometer area of northwestern Block Island Sound, are used with sediment samples, and still and video photography of the sea floor, collected by the U.S. Geological Survey at 43 stations within this area, to interpret the sea-floor features and sedimentary environments. Features on the sea floor include boulders, sand waves, scour depressions, modern marine sediments, and trawl marks. Boulders, which are often several meters wide, are found in patches in the shallower depths and tend to be overgrown with sessile flora and fauna. They are lag deposits of winnowed glacial drift, and reflect high-energy environments characterized by processes associated with erosion and nondeposition. Sand waves and megaripples tend to have crests that either trend parallel to shore with 20- to 50-meter (m) wavelengths or trend perpendicular to shore with several-hundred-meter wavelengths. The sand waves reflect sediment transport directions perpendicular to shore by waves, and parallel to shore by tidal or wind-driven currents, respectively. Scour depressions, which are about 0.5 m lower than the surrounding sea floor, have floors of gravel and coarser sand than bounding modern marine sediments. These scour depressions, which are conspicuous in the sidescan-sonar data because of their more highly reflective coarser sediment floors, are likely formed by storm-generated, seaward-flowing currents and maintained by the turbulence in bottom currents caused by their coarse sediments. Areas of the sea floor with modern marine sediments tend to be relatively flat to current-rippled and sandy.

Rhode Island↗
USGS2017

Environmental considerations related to mining of nonfuel minerals

Throughout most of human history, environmental stewardship during mining has not been a priority partly because of the lack of applicable laws and regulations and partly because of ignorance about the effects that mining can have on the environment. In the United States, the National Environmental Policy Act of 1969, in conjunction with related laws, codified a more modern approach to mining, including the responsibility for environmental stewardship, and provided a framework for incorporating environmental protection into mine planning. Today, similar frameworks are in place in the other developed countries of the world, and international mining companies generally follow similar procedures wherever they work in the world. The regulatory guidance has fostered an international effort among all stakeholders to identify best practices for environmental stewardship. The modern approach to mining using best practices involves the following: (a) establishment of a pre-mining baseline from which to monitor environmental effects during mining and help establish geologically reasonable closure goals; (b) identification of environmental risks related to mining through standardized approaches; and (c) formulation of an environmental closure plan before the start of mining. A key aspect of identifying the environmental risks and mitigating those risks is understanding how the risks vary from one deposit type to another—a concept that forms the basis for geoenvironmental mineral-deposit models. Accompanying the quest for best practices is the goal of making mining sustainable into the future. Sustainable mine development is generally considered to be development that meets the needs of the present generation without compromising the ability of future generations to meet their own needs. The concept extends beyond the availability of nonrenewable mineral commodities and includes the environmental and social effects of mine development. Global population growth, meanwhile, has decreased the percentage of inhabitable land available to support society’s material needs. Presently, the land area available to supply the mineral resources, energy resources, water, food, shelter, and waste disposal needs of all Earth’s inhabitants is estimated to be 135 square meters per person. Continued global population growth will only increase the challenges of sustainable mining. Current trends in mining are also expected to lead to new environmental challenges in the future, among which are mine-waste management issues related to mining larger deposits for lower ore grade; water-management issues related to both the mining of larger deposits and the changes in precipitation brought about by climate change; and greenhouse gas issues related to reducing the carbon footprint of larger, more energy-intensive mining operations.

Professional Paper↗
USGS2005

Blind comparisons of shear-wave velocities at closely-spaced sites in San Jose, California: Proceedings of a Workshop held at the US Geological Survey, Menlo Park, May 3, 2004

Shear-wave velocities within several hundred meters of Earth's surface are important in specifying earthquake ground motions for engineering design. Not only are the shearwave velocities used in classifying sites for use of modern building codes, but they are also used in site-specific studies of particularly significant structures. Many are the methods for estimating sub-surface shear-wave velocities, but few are the blind comparisons of a number of the methods at a single site. The word "blind" is important here and means that the measurements and interpretations are done completely independent of one another. Stephen Hartzell of the USGS office on Golden, Colorado realized that such an experiment would be very useful for assessing the strengths and weaknesses of the various methods, and he and Jack Boatwright of the USGS office in Menlo Park, California, in cooperation with Carl Wentworth of the Menlo Park USGS office found a convenient site in the city of San Jose, California. The site had good access and space for conducting experiments, and a borehole drilled to several hundred meters by the Santa Clara Valley Water District was made available for downhole logging. Jack Boatwright asked David Boore to coordinate the experiment. In turn, David Boore persuaded several teams to make measurements, helped with the local logistics, collected the results, and organized and conducted an International Workshop in May, 2004. At this meeting the participants in the experiment gathered in Menlo Park to describe their measurements and interpretations, and to see the results of the comparisons of the various methods for the first time. This Open-File Report describes the results of that workshop. One of the participants, Michael Asten, offered to help the coordinator prepare this report. Because of his lead role in pulling the report together, Dr. Asten is the lead author of the paper to follow and is also the lead Compiler for the Open-File Report. It is important to recognize that most of the participants in the experiments contributed at their own expense. It is gratifying that many people recognized the importance of the experiment and were willing to volunteer their time and resources. We thank them for this effort. This Report is organized in three parts: the first part is a paper summarizing the results of the Workshop, and presenting some conclusions regarding the various methods; the second part is a compilation of those documents describing the experiments that were presented at the meeting (a few of the reports have had minor post-meeting revisions, but with only one exception noted later, none of the models were changed). The final part of this Report is a compilation of the presentations from the meeting -- these are largely in the form of Powerpoint files. No attempt has been made by the compilers to edit the material in parts 2 and 3. It is included here as is for the benefit of the reader.

California↗