SEARCH · Geology Reports

Results for “Mechanics of Materials”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources

USGS2015

USGS role and response to highly pathogenic avian influenza

Avian influenza viruses are naturally occurring in wild birds such as ducks, geese, swans, and gulls. These viruses generally do not cause illness in wild birds, however, when spread to poultry they can be highly pathogenic and cause illness and death in backyard and commercial farms. Outbreaks may cause devastating agricultural economic losses and some viral strains have the potential to infect people directly. Furthermore, the combination of avian influenza viruses with mammalian viruses can result in strains with the ability to transmit from person to person, possibly leading to viruses with pandemic potential. All known pandemic influenza viruses have had some genetic material of avian origin. Since 1996, a strain of highly pathogenic avian influenza (HPAI) virus, H5N1, has caused infection in wild birds, losses to poultry farms in Eurasia and North Africa, and led to the deaths of several hundred people. Spread of the H5N1 virus and other influenza strains from China was likely facilitated by migratory birds. In December 2014, HPAI was detected in poultry in Canada and migratory birds in the United States. Since then, HPAI viruses have spread to large parts of the United States and will likely continue to spread through migratory bird flyways and other mechanisms throughout North America. In the United States, HPAI viruses have severely affected the poultry industry with millions of domestic birds dead or culled. These strains of HPAI are not known to cause disease in humans; however, the Centers for Disease Control and Prevention (CDC) advise caution when in close contact with infected birds. Experts agree that HPAI strains currently circulating in wild birds of North America will likely persist for the next few years. This unprecedented situation presents risks to the poultry industry, natural resource management, and potentially human health. Scientific knowledge and decision support tools are urgently needed to understand factors affecting the persistence of HPAI in wild birds, to forecast future spread of HPAI by wild birds, and to detect novel strains of HPAI that may emerge.

Fact Sheet↗

USGS2015

USGS highly pathogenic avian influenza research strategy

Fact Sheet↗

USGS1993

The Effect of mining and related activities on the sediment-trace element geochemistry of Lake Coeur d'Alene, Idaho, U.S.A.; Part II, Subsurface sediments

During the summer of 1990, 12 gravity cores were collected in Lake Coeur d'Alene, Idaho, at various depths and in a variety of depositional environments. All core subsamples were analyzed to determine bulk chemistry and selected subsamples were analyzed for trace-element partitioning and (137)Cs activity. The purpose of these analyses was to determine the trace-element concentrations and distributions in the sediment column and to try to establish a trace-element geochemical history of the lake in relation to mining and mining-related discharge operations in the area. Substantial portions of the near-surface sediments in Lake Coeur d'Alene are markedly enriched in Ag, As, Cd, Hg, Pb, Sb, and Zn, and somewhat enriched in Cu, Fe, and Mn. Variations in the thickness of the trace element- rich sediments suggest that the source of much of this material is the Coeur d'Alene River. Calculated estimates indicate that there are some 75 million metric tons of trace element-rich sediments currently on/in the lakebed. Estimated trace-element masses in excess of those caused by non-mining-related sources, range from a high of 468,000 metric tons of Pb to a low of 260 metric tons of Hg. The similarity between the trace element-rich surface and subsurface sediments as regards their: (1) location; (2) bulk chemistry; (3) interelement relationships; and (4) trace-element partitioning indicate that the sources and/or concentrating mechanisms causing the trace-element enrichment in the lake probably have been the same throughout their depositional history. Based on Mt. St. Helens' ash layer from the 1980 eruption, ages estimated from (137)Cs activity, and the presence of 80 discernible and presumably annual layers in a core collected near the Coeur d'Alene River delta, it appears that deposition rates for the trace element-rich sediments varied from 2.1 to 1.3 cm/yr. These data also indicate that the deposition of trace element-rich sediments began, at least in the Coeur d'Alene River delta, sometime between 1895 and 1910, dates consistent with the onset of mining and ore-processing activities in the area which began in the 1880's.

Open-File Report↗

USGS2011

Pressure waves in a supersaturated bubbly magma

We study the interaction of acoustic pressure waves with an expanding bubbly magma. The expansion of magma is the result of bubble growth during or following magma decompression and leads to two competing processes that affect pressure waves. On the one hand, growth in vesicularity leads to increased damping and decreased wave amplitudes, and on the other hand, a decrease in the effective bulk modulus of the bubbly mixture reduces wave velocity, which in turn, reduces damping and may lead to wave amplification. The additional acoustic energy originates from the chemical energy released during bubble growth. We examine this phenomenon analytically to identify conditions under which amplification of pressure waves is possible. These conditions are further examined numerically to shed light on the frequency and phase dependencies in relation to the interaction of waves and growing bubbles. Amplification is possible at low frequencies and when the growth rate of bubbles reaches an optimum value for which the wave velocity decreases sufficiently to overcome the increased damping of the vesicular material. We examine two amplification phase-dependent effects: (1) a tensile-phase effect in which the inserted wave adds to the process of bubble growth, utilizing the energy associated with the gas overpressure in the bubble and therefore converting a large proportion of this energy into additional acoustic energy, and (2) a compressive-phase effect in which the pressure wave works against the growing bubbles and a large amount of its acoustic energy is dissipated during the first cycle, but later enough energy is gained to amplify the second cycle. These two effects provide additional new possible mechanisms for the amplification phase seen in Long-Period (LP) and Very-Long-Period (VLP) seismic signals originating in magma-filled cracks.

Geophysical Journal International↗

USGS2023

Mantle origin and crustal differentiation of basalts and hawaiites of northern Harrat Rahat, Kingdom of Saudi Arabia

Quaternary volcanic rocks of northern Harrat Rahat, Kingdom of Saudi Arabia, are chiefly alkali basalts with subordinate transitional basalts, hawaiites, mugearites, benmoreites, and trachytes. Geochemical and isotopic results indicate that crystallization-differentiation, mixing, and cumulate reassimilation within the magmatic system produced most of its compositional diversity, with only minor involvement of Neoproterozoic crust. With increasing evolution, crystal assemblages that separated from and drove basalt-to-hawaiite differentiation passed from (1) dunitic or troctolitic to (2) olivine gabbroic to (3) titanomagnetite-bearing olivine gabbroic, with typical hawaiites representing about 20 weight percent residual liquids from an estimated primary alkali basaltic parent. Crystallization-differentiation simulations for midcrustal pressures yield the closest compositional match to the basalt-hawaiite suite, and stagnation in the midcrustal area (near 20 kilometers [km] depth) may result from density trapping beneath the lower density upper continental crust. Least differentiated alkali basalts have fractionation-adjusted major-oxide compositions that are consistent with separation from the deeper parts (60–70 km) of the spinel-lherzolite stability field at pressures that are close to the local lithosphere-asthenosphere boundary (60–80 km). Mantle potential temperature estimates are strongly sensitive to modeling approach, but potential temperatures (1,345–1,390 degrees Celsius [°C]) are not discernably greater than for midocean ridge basalts (MORB; 1,350–1,410 °C) if adherence to spinel-lherzolite melting relations is required. Inversion of the trace-element concentrations of the lesser fractionated basalts indicates a depleted mantle source, similar to MORB-source estimates, but one that is enriched in Sr and includes a greater relative proportion of melting in the garnet-peridotite stability field. These geochemical and thermal relations, as well as radiogenic isotopes, point to a dominantly depleted mantle asthenospheric source for Harrat Rahat basalts, admixed with subordinate materials either from the Afar mantle plume or an enriched MORB component in the ambient asthenosphere. The lithosphere-asthenosphere boundary is shallower beneath the belt of major volcanic fields on the Arabia Plate, and restoration of rifting across the Red Sea and Gulf of Aden places the south end of this belt adjacent to the northern part of the Afar region, suggesting a once-continuous structure, possibly an arch, a weakness, or a discontinuity along the base of the lithosphere. Magma generation can be ascribed to focused upwelling and decompression melting, perhaps driven by a magmatic-feedback mechanism whereby basaltic intrusions into the deep lithosphere solidify as eclogites, causing lithospheric foundering and further asthenospheric upwelling and decompression melting in a restricted region.

northern Harrat Rahat↗

USGS1998

Field and laboratory evidence for intrinsic biodegradation of vinyl chloride contamination in a Fe(III)-reducing aquifer

Intrinsic bioremediation of chlorinated ethenes in anaerobic aquifers previously has not been considered feasible, due, in large part, to 1) the production of vinyl chloride during microbial reductive dechlorination of higher chlorinated contaminants and 2) the apparent poor biodegradability of vinyl chloride under anaerobic conditions. In this study, a combination of field geochemical analyses and laboratory radiotracer ([1,2-14C] vinyl chloride) experiments was utilized to assess the potential for intrinsic biodegradation of vinyl chloride contamination in an Fe(III)-reducing, anaerobic aquifer. Microcosm experiments conducted under Fe(III)-reducing conditions with material from the Fe(III)-reducing, chlorinated-ethene contaminated aquifer demonstrated significant oxidation of [1,2-14C] vinyl chloride to 14CO2 with no detectable production of ethene or other reductive dehalogenation products. Rates of degradation derived from the microcosm experiments (0.9-1.3% d-1) were consistent with field-estimated rates (0.03-0.2% d-1) of apparent vinyl chloride degradation. Field estimates of apparent vinyl chloride biodegradation were calculated using two distinct approaches; 1) a solute dispersion model and 2) a mass balance assessment. These findings demonstrate that degradation under Fe(III) reducing conditions can be an environmentally significant mechanism for intrinsic bioremediation of vinyl chloride in anaerobic ground-water systems.

Journal of Contaminant Hydrology↗

USGS1990

Mechanisms controlling Cu, Fe, Mn, and Co profiles in peat of the Filson Creek Fen, northeastern Minnesota

Filson Creek Fen, located in northeastern Minnesota, overlies a Cu-Ni sulfide deposit. A site in the fen was studied to evaluate the hydrogeochemical mechanisms governing the development of Fe, Mn, Co, and Cu profiles in the peat. At the study site, surface peat approximately 1 m thick is separated from the underlying mineralized bedrock by a 6–12 m thickness of lake and glaciofluvial sediments and till. Concentrations of Fe, Mn, Co, and Cu in peat and major elements in pore water delineate a shallow, relatively oxidized, Cu-rich zone overlying a deeper, reduced, Fe-, Mn-, and Co-rich zone within the peat. Sequential metal extractions from peat samples reveal that 40–55% of the Cu in the shallow zone is associated with organic material, whereas the remaining Cu is distributed between iron-oxide, sulfide, and residual fractions. Sixty to seventy percent of the Fe, Mn, and Co concentrated in the deeper zone occur in the residual phase. The metal profiles and associations probably result from non-steady-state input of metals and detritus into the fen during formation of the peat column. The enrichment of organic-associated Cu in the upper, oxidized zone represents a combination of Cu transported into the fen with detrital plant fragments and soluble Cu, derived from weathering of outcrop and subcrop of the mineral deposit, transported into the fen, and fixed onto organic matter in the peat. The variable stratigraphy of the peat indicates that weathering processes and surface vegetation have changed through time in the fen. The Fe, Mn, and Co maxima at the base of the peat are associated with a maximum in detrital matter content of the peat resulting from a transition between the underlying inorganic sedimentary environment to an organic sedimentary environment. The chemistry of sediments and ground water collected beneath the peat indicate that mobilization of metals from sulfide minerals in the buried mineral deposit or glacial deposits is minimal. Therefore, the primary source of Cu to the peat at the study site is outcrops and shallow subcrops of the mineral deposit adjacent to the fen.

Geochimica et Cosmochimica Acta↗

USGS2001

Catastrophic debris flows transformed from landslides in volcanic terrains : mobility, hazard assessment and mitigation strategies

Communities in lowlands near volcanoes are vulnerable to significant volcanic flow hazards in addition to those associated directly with eruptions. The largest such risk is from debris flows beginning as volcanic landslides, with the potential to travel over 100 kilometers. Stratovolcanic edifices commonly are hydrothermal aquifers composed of unstable, altered rock forming steep slopes at high altitudes, and the terrain surrounding them is commonly mantled by readily mobilized, weathered airfall and ashflow deposits. We propose that volcano hazard assessments integrate the potential for unanticipated debris flows with, at active volcanoes, the greater but more predictable potential of magmatically triggered flows. This proposal reinforces the already powerful arguments for minimizing populations in potential flow pathways below both active and selected inactive volcanoes. It also addresses the potential for volcano flank collapse to occur with instability early in a magmatic episode, as well as the 'false-alarm problem'-the difficulty in evacuating the potential paths of these large mobile flows. Debris flows that transform from volcanic landslides, characterized by cohesive (muddy) deposits, create risk comparable to that of their syneruptive counterparts of snow and ice-melt origin, which yield noncohesive (granular) deposits, because: (1) Volcano collapses and the failures of airfall- and ashflow-mantled slopes commonly yield highly mobile debris flows as well as debris avalanches with limited runout potential. Runout potential of debris flows may increase several fold as their volumes enlarge beyond volcanoes through bulking (entrainment) of sediment. Through this mechanism, the runouts of even relatively small collapses at Cascade Range volcanoes, in the range of 0.1 to 0.2 cubic kilometers, can extend to populated lowlands. (2) Collapse is caused by a variety of triggers: tectonic and volcanic earthquakes, gravitational failure, hydrovolcanism, and precipitation, as well as magmatic activity and eruptions. (3) Risk of collapse begins with initial magmatic activity and increases as intrusion proceeds. An archetypal debris flow from volcanic terrain occurred in Colombia with a tectonic earthquake (M 6.4) in 1994. The Rio Piez conveyed a catastrophic wave of debris flow over 100 kilometers, coalesced from multiple slides of surflcial material weakened both by weathering and by hydrothermal alteration in a large strato- volcano. Similar seismogenic flows occurred in Mexico in 1920 (M -6.5), Chile in 1960 (M 9.2), and Ecuador in 1987 (M 6.1 and 6.9). Velocities of wave fronts in two examples were 60 to 90 km/hr (17-25 meters per second) over the initial 30 kilometers. Volcano flank and sector collapses may produce untransformed debris avalanches, as occurred initially at Mount St. Helens in 1980. However, at least as common is direct transformation of the failed mass to a debris flow. At two other volcanoes in the Cascade Range-- Mount Rainier and Mount Baker--rapid transformation and high mobility were typical of most of at least 15 Holocene flows. This danger exists downstream from many stratovolcanoes worldwide; the population at risk is near 150,000 and increasing at Mount Rainier. The first step in preventing future catastrophes is documenting past flows. Deposits of some debris flows, however, can be mistaken for those of less-mobile debris avalanches on the basis of mounds formed by buoyed megaclasts. Megaclasts may record only the proximal phase of a debris flow that began as a debris avalanche. Runout may have extended much farther, and thus furore flow mobility may be underestimated. Processes and behaviors of megaclast-bearing paleoflows are best inferred from the intermegaclast matrix. Mitigation strategy can respond to volcanic flows regardless of type and trigger by: (1) Avoidance: Limit settlement in flow pathways to numbers that can be evacuated after event warnings (flow is occurring). (2) Instrumental even

Professional Paper↗

USGS2004

Flow path of the 1993 Hokkaido-Nansei-oki earthquake seismoturbidite, suthern margin of the Japan sea north basin, inferred from anisotropy of magnetic susceptibility

A magnetic fabric analysis has been carried out on standard cube samples from one gravity and three multiple cores extracted from the Shiribeshi trough and Okushiri basin in the southern margin of the Japan sea north basin. It is aimed at tracing the flow path of turbidites that are assumed to have deposited in response to the 1993 Hokkaido-Nansei-oki earthquake. Magnetic remanence was used for reorientation to the geographic coordinates. Magnetomineralogical investigations including low-temperature magnetometry, magnetic hysteresis loops and isothermal remanent magnetization (IRM) acquisition experiments indicate that pseudosingle domain to multidomain magnetite is the principal magnetic carrier and is, therefore, capable of providing reliable anisotropy of magnetic susceptibility (AMS) palaeocurrent direction estimates. A well-developed near-horizontal magnetic foliation and minimum susceptibility axes lying close to vertical are recorded at all sites reflecting an original depositional fabric. Clearly defined magnetic lineation was observed at all sites and is considered to reflect the palaeocurrent direction. Down-core changes of susceptibility and key AMS parameters show good correspondence to occurrences of turbidite layers marking the increase of input of influx materials. In agreement with results from recent marine surveys and IZANAGI side-scan sonar images, an NNE transportation trend has been estimated for sediments at sites from the Shiribeshi trough with a possible depositing path initiating from the slope bounding the south and southeastern margin down to the trough floor. Similarly, a SSE palaeocurrent direction has been estimated for sediments from the Okushiri basin with evidence for a relatively strong transporting current flowing through the canyons along the steep slope bounding the north and northeastern margins of the basin. The present results agree with the view that slope failure is the most probable mechanism for the down-slope transport of the sand from the shelves and upper slopes down to floors of basins and troughs in the southern margin of the Japan sea north basin. They further support the ongoing assumption that the 1993 Hokkaido-Nansei-oki and other strong historical earthquakes together with associated tsunamis are the principal triggering forces for the down-slope mass gravitational transport and formation of turbidites in this seismically active area. ?? 2004 RAS.

Geophysical Journal International↗

USGS2016

Water-magma interaction and plume processes in the 2008 Okmok eruption, Alaska

Eruptions of similar explosivity can have divergent effects on the surroundings due to differences in the behavior of the tephra in the eruption column and atmosphere. Okmok volcano, located on Umnak Island in the eastern Aleutian Islands, erupted explosively between 12 July and 19 August 2008. The basaltic andesitic eruption ejected &sim;0.24 km 3 dense rock equivalent (DRE) of tephra, primarily directed to the northeast of the vent area. The first 4 h of the eruption produced dominantly coarse-grained tephra, but the following 5 wk of the eruption deposited almost exclusively ash, much of it very fine and deposited as ash pellets and ashy rain and mist. Meteorological storms combined with abundant plume water to efficiently scrub ash from the eruption column, with a rapid decrease in deposit thickness with distance from the vent. Grain-size analysis shows that the modes (although not their relative proportions) are very constant throughout the deposit, implying that the fragmentation mechanisms did not vary much. Grain-shape features consistent with molten fuel-coolant interaction are common. Surface and groundwater drainage into the vents provided the water for phreatomagmatic fragmentation. The available water (water that could reach the vent area during the eruption) was &sim;2.8 × 10 10 kg, and the erupted magma totaled &sim;7 × 10 11 kg, which yield an overall water:magma mass ratio of &sim;0.04, but much of the water was not interactive. Although magma flux dropped from 1 × 10 7 kg/s during the initial 4 h to 1.8 × 10 5 kg/s for the remainder of the eruption, most of the erupted material was ejected during the lower-mass-flux period due to its much greater length, and this tephra was dominantly deposited within 10 km downwind of the vent. This highlights the importance of ash scrubbing in the evaluation of hazards from explosive eruptions.

Alaska↗

USGS2001

Mars Global Surveyor Thermal Emission Spectrometer experiment: Investigation description and surface science results

The Thermal Emission Spectrometer (TES) investigation on Mars Global Surveyor (MGS) is aimed at determining (1) the composition of surface minerals, rocks, and ices; (2) the temperature and dynamics of the atmosphere; (3) the properties of the atmospheric aerosols and clouds; (4) the nature of the polar regions; and (5) the thermophysical properties of the surface materials. These objectives are met using an infrared (5.8- to 50-μm) interferometric spectrometer, along with broadband thermal (5.1- to 150-μm) and visible/near-IR (0.3- to 2.9-μm) radiometers. The MGS TES instrument weighs 14.47 kg, consumes 10.6 W when operating, and is 23.6×35.5×40.0 cm in size. The TES data are calibrated to a 1-σ precision of 2.5 −6 ×10 −8 W cm −2 sr −1 /cm −1 , 1.6×10 −6 W cm −2 sr −1 , and ∼0.5 K in the spectrometer, visible/near-IR bolometer, and IR bolometer, respectively. These instrument subsections are calibrated to an absolute accuracy of ∼4×10 −8 W cm −2 sr −1 /cm −1 (0.5 K at 280 K), 1–2%, and ∼1–2 K, respectively. Global mapping of surface mineralogy at a spatial resolution of 3 km has shown the following: (1) The mineralogic composition of dark regions varies from basaltic, primarily plagioclase feldspar and clinopyroxene, in the ancient, southern highlands to andesitic, dominated by plagioclase feldspar and volcanic glass, in the younger northern plains. (2) Aqueous mineralization has produced gray, crystalline hematite in limited regions under ambient or hydrothermal conditions; these deposits are interpreted to be in-place sedimentary rock formations and indicate that liquid water was stable near the surface for a long period of time. (3) There is no evidence for large-scale (tens of kilometers) occurrences of moderate-grained (>50-μm) carbonates exposed at the surface at a detection limit of ∼10%. (4) Unweathered volcanic minerals dominate the spectral properties of dark regions, and weathering products, such as clays, have not been observed anywhere above a detection limit of ∼10%; this lack of evidence for chemical weathering indicates a geologic history dominated by a cold, dry climate in which mechanical, rather than chemical, weathering was the significant form of erosion and sediment production. (5) There is no conclusive evidence for sulfate minerals at a detection limit of ∼15%. The polar region has been studied with the following major conclusions: (1) Condensed CO 2 has three distinct end-members, from fine-grained crystals to slab ice. (2) The growth and retreat of the polar caps observed by MGS is virtually the same as observed by Viking 12 Martian years ago. (3) Unique regions have been identified that appear to differ primarily in the grain size of CO 2 ; one south polar region appears to remain as black slab CO 2 ice throughout its sublimation. (4) Regional atmospheric dust is common in localized and regional dust storms around the margin and interior of the southern cap. Analysis of the thermophysical properties of the surface shows that (1) the spatial pattern of albedo has changed since Viking observations, (2) a unique cluster of surface materials with intermediate inertia and albedo occurs that is distinct from the previously identified low-inertia/bright and high-inertia/dark surfaces, and (3) localized patches of high-inertia material have been found in topographic lows and may have been formed by a unique set of aeolian, fluvial, or erosional processes or may be exposed bedrock.

Journal of Geophysical Research E: Planets↗

USGS2016

Constraining the relative importance of raindrop- and flow-driven sediment transport mechanisms in postwildfire environments and implications for recovery time scales

Mountain watersheds recently burned by wildfire often experience greater amounts of runoff and increased rates of sediment transport relative to similar unburned areas. Given the sedimentation and debris flow threats caused by increases in erosion, more work is needed to better understand the physical mechanisms responsible for the observed increase in sediment transport in burned environments and the time scale over which a heightened geomorphic response can be expected. In this study, we quantified the relative importance of different hillslope erosion mechanisms during two postwildfire rainstorms at a drainage basin in Southern California by combining terrestrial laser scanner-derived maps of topographic change, field measurements, and numerical modeling of overland flow and sediment transport. Numerous debris flows were initiated by runoff at our study area during a long-duration storm of relatively modest intensity. Despite the presence of a well-developed rill network, numerical model results suggest that the majority of eroded hillslope sediment during this long-duration rainstorm was transported by raindrop-induced sediment transport processes, highlighting the importance of raindrop-driven processes in supplying channels with potential debris flow material. We also used the numerical model to explore relationships between postwildfire storm characteristics, vegetation cover, soil infiltration capacity, and the total volume of eroded sediment from a synthetic hillslope for different end-member erosion regimes. This study adds to our understanding of sediment transport in steep, postwildfire landscapes and shows how data from field monitoring can be combined with numerical modeling of sediment transport to isolate the processes leading to increased erosion in burned areas.

California↗

USGS2017

The formation of gullies on Mars today

A decade of high-resolution monitoring has revealed extensive activity in fresh Martian gullies. Flows within the gullies are diverse: they can be relatively light, neutral or dark, colourful or bland, and range from superficial deposits to 10 m-scale topographic changes. We observed erosion and transport of material within gullies, new terraces, freshly eroded channel segments, migrating sinuous curves, channel abandonment, and lobate deposits. We also observed early stages of gully initiation, demonstrating that these processes are not merely modifying pre-existing landforms. The timing of activity closely correlates with the presence of seasonal CO 2 frost, so the current changes must be part of ongoing gully formation that is driven largely by its presence. We suggest that the cumulative effect of many flows erodes alcoves and channels, and builds lobate aprons, with no involvement of liquid water. Instead, flows may be fluidized by sublimation of entrained CO 2 ice or other mechanisms. The frequent activity is likely to have erased any features dating from high-obliquity periods, so fresh gully geomorphology at middle and high latitudes is not evidence for past liquid water. CO 2 ice-driven processes may have been important throughout Martian geological history and their deposits could exist in the rock record, perhaps resembling debris-flow sediments.

Geological Society, London, Special Publications↗

USGS2007

Geology of the Yucca Mountain site area, southwestern Nevada

Yucca Mountain in southwestern Nevada is a prominent, irregularly shaped upland formed by a thick apron of Miocene pyroclastic-flow and fallout tephra deposits, with minor lava flows, that was segmented by through-going, large-displacement normal faults into a series of north-trending, eastwardly tilted structural blocks. The principal volcanic-rock units are the Tiva Canyon and Topopah Spring Tuffs of the Paintbrush Group, which consist of volumetrically large eruptive sequences derived from compositionally distinct magma bodies in the nearby southwestern Nevada volcanic field, and are classic examples of a magmatic zonation characterized by an upper crystal-rich (>10% crystal fragments) member, a more voluminous lower crystal-poor (<5% crystal fragments) member, and an intervening thin transition zone. Rocks within the crystal-poor member of the Topopah Spring Tuff, lying some 280 m below the crest of Yucca Mountain, constitute the proposed host rock to be excavated for the storage of high-level radioactive wastes. Separation of the tuffaceous rock formations into subunits that allow for detailed mapping and structural interpretations is based on macroscopic features, most importantly the relative abundance of lithophysae and the degree of welding. The latter feature, varying from nonwelded through partly and moderately welded to densely welded, exerts a strong control on matrix porosities and other rock properties that provide essential criteria for distinguishing hydrogeologic and thermal mechanical units, which are of major interest in evaluating the suitability of Yucca Mountain to host a safe and permanent geologic repository for waste storage. A thick and varied sequence of surficial deposits mantle large parts of the Yucca Mountain site area. Mapping of these deposits and associated soils in exposures and in the walls of trenches excavated across buried faults provides evidence for multiple surface-rupturing events along all of the major faults during Pleistocene and Holocene times; these paleoseismic studies form the basis for evaluating the potential for future earthquakes and fault displacements. Thermoluminescence and U-series analyses were used to date the surficial materials involved in the Quaternary faulting events. The rate of erosional downcutting of bedrock on the ridge crests and hillslopes of Yucca Mountain, being of particular concern with respect to the potential for breaching of the proposed underground storage facility, was studied by using rock varnish cation-ratio and 10 Be and 36 Cl cosmogenic dating methods to determine the length of time bedrock outcrops and hillslope boulder deposits were exposed to cosmic rays, which then served as a basis for calculating long-term erosion rates. The results indicate rates ranging from 0.04 to 0.27 cm/k.y., which represent the maximum downcutting along the summit of Yucca Mountain under all climatic conditions that existed there during most of Quaternary time. Associated studies include the stratigraphy of surficial deposits in Fortymile Wash, the major drainage course in the area, which record a complex history of four to five cut-and-fill cycles within the channel during middle to late Quaternary time. The last 2-4 m of incision probably occurred during the last pluvial climatic period, 22-18 ka, followed by aggradation to the present time. Major faults at Yucca Mountain-from east to west, the Paintbrush Canyon, Bow Ridge, Stagecoach Road, Solitario Canyon, Fatigue Wash, Windy Wash, and Northern and Southern Crater Flat Faults-trend predominantly north, are spaced 1-5 km apart, have bedrock displacements ranging from 125 m to as much as 500 m, and exhibit Quaternary movements of several centimeters to a few meters. Displacements are predominantly down to the west, and bedrock/alluvium contacts commonly are marked by fault-line scarps. The predominant northerly fault trend changes to a more northeasterly trend in adjacent areas south

Nevada↗

USGS2017

Bacteria versus selenium: A view from the inside out

Bacteria and selenium (Se) are closely interlinked as the element serves both essential nutrient requirements and energy generation functions. However, Se can also behave as a powerful toxicant for bacterial homeostasis. Conversely, bacteria play a tremendous role in the cycling of Se between different environmental compartments, and bacterial metabolism has been shown to participate to all valence state transformations undergone by Se in nature. Bacteria possess an extensive molecular repertoire for Se metabolism. At the end of the 1980s, a novel mode of anaerobic respiration based on Se oxyanions was experimentally documented for the first time. Following this discovery, specific enzymes capable of reducing Se oxyanions and harvesting energy were found in a number of anaerobic bacteria. The genes involved in the expression of these enzymes have later been identified and cloned. This iterative approach undertaken outside-in led to the understanding of the molecular mechanisms of Se transformations in bacteria. Based on the extensive knowledge accumulated over the years, we now have a full(er) view from the inside out , from DNA-encoding genes to enzymes and thermodynamics. Bacterial transformations of Se for assimilatory purposes have been the object of numerous studies predating the investigation of Se respiration. Remarkable contributions related to the understating of the molecular picture underlying seleno-amino acid biosynthesis are reviewed herein. Under certain circumstances, Se is a toxicant for bacterial metabolism and bacteria have evolved strategies to counteract this toxicity, most notably by the formation of elemental Se (nano)particles. Several biotechnological applications, such as the production of functional materials and the biofortification of crop species using Se-utilizing bacteria, are presented in this chapter.

Book chapter↗

USGS2007

Late Neogene ice drainage changes in Prydz Bay, East Antarctica and the interaction of Antarctic ice sheet evolution and climate

During the late Neogene, the Lambert Glacier–Amery Ice Shelf drainage system flowed across Prydz Bay and showed several changes in flow pattern. In the Early Pliocene, the Lambert Glacier ice stream reached the shelf edge and built a trough mouth fan on the upper continental slope. This was associated with an increase in ice discharge from the Princess Elizabeth Land coast into Prydz Bay. The trough mouth fan consists mostly of debris flow deposits derived from the melting out of subglacial debris at the grounding line at the continental shelf edge. The composition of debris changes at around 1.1 Ma BP from material derived from erosion of the Lambert Graben and Prydz Bay Basin to mostly basement derived material. This probably results from a reduction in the depth of erosion and hence the volume of ice in the system. In the trough mouth fan, debris flow intervals are separated by thin mudstone horizons deposited when the ice had retreated from the shelf edge. Age control in an Ocean Drilling Program hole indicates that most of the trough mouth fan was deposited prior to the Brunhes–Matuyama Boundary (780 ka BP). This stratigraphy indicates that extreme ice advances in Prydz Bay were rare after the mid Pleistocene, and that ice discharge from Princess Elizabeth Land became more dominant than the Lambert Glacier ice in shelf grounding episodes, since the mid Pleistocene. Mechanisms that might have produced this change are extreme inner shelf erosion and/or decreasing ice accumulation in the interior of East Antarctica. We interpret this pattern as reflecting the increasing elevation of coastal ice through time and the increasing continentality of the interior of the East Antarctic Ice Sheet. The mid Pleistocene change to 100 ka climatic and sea level cycles may also have affected the critical relationship between ice dynamics and the symmetry or asymmetry of the interglacial/glacial climate cycle duration.

Palaeogeography, Palaeoclimatology, Palaeoecology↗

USGS2009

Thermal conductivity of hydrate-bearing sediments

A thorough understanding of the thermal conductivity of hydrate-bearing sediments is necessary for evaluating phase transformation processes that would accompany energy production from gas hydrate deposits and for estimating regional heat flow based on the observed depth to the base of the gas hydrate stability zone. The coexistence of multiple phases (gas hydrate, liquid and gas pore fill, and solid sediment grains) and their complex spatial arrangement hinder the a priori prediction of the thermal conductivity of hydrate-bearing sediments. Previous studies have been unable to capture the full parameter space covered by variations in grain size, specific surface, degree of saturation, nature of pore filling material, and effective stress for hydrate-bearing samples. Here we report on systematic measurements of the thermal conductivity of air dry, water- and tetrohydrofuran (THF)-saturated, and THF hydrate–saturated sand and clay samples at vertical effective stress of 0.05 to 1 MPa (corresponding to depths as great as 100 m below seafloor). Results reveal that the bulk thermal conductivity of the samples in every case reflects a complex interplay among particle size, effective stress, porosity, and fluid-versus-hydrate filled pore spaces. The thermal conductivity of THF hydrate–bearing soils increases upon hydrate formation although the thermal conductivities of THF solution and THF hydrate are almost the same. Several mechanisms can contribute to this effect including cryogenic suction during hydrate crystal growth and the ensuing porosity reduction in the surrounding sediment, increased mean effective stress due to hydrate formation under zero lateral strain conditions, and decreased interface thermal impedance as grain-liquid interfaces are transformed into grain-hydrate interfaces.

Journal of Geophysical Research B: Solid Earth↗

USGS2009

Earthquake stress drops and inferred fault strength on the Hayward Fault, east San Francisco Bay, California

We study variations in earthquake stress drop with respect to depth, faulting regime, creeping versus locked fault behavior, and wall-rock geology. We use the P-wave displacement spectra from borehole seismic recordings of M 1.0-4.2 earthquakes in the east San Francisco Bay to estimate stress drop using a stack-and-invert empirical Green's function method. The median stress drop is 8.7 MPa, and most stress drops are in the range between 0.4 and 130 MPa. An apparent correlation between stress drop and magnitude is entirely an artifact of the limited frequency band of 4-55 Hz. There is a trend of increasing stress drop with depth, with a median stress drop of ~5 MPa for 1-7 km depth, ~10 MPa for 7-13 km depth, and ~50 MPa deeper than 13 km. We use S=P amplitude ratios measured from the borehole records to better constrain the first-motion focal mechanisms. High stress drops are observed for a deep cluster of thrust-faulting earthquakes. The correlation of stress drops with depth and faulting regime implies that stress drop is related to the applied shear stress. We compare the spatial distribution of stress drops on the Hayward fault to a model of creeping versus locked behavior of the fault and find that high stress drops are concentrated around the major locked patch near Oakland. This also suggests a connection between stress drop and applied shear stress, as the locked patch may experience higher applied shear stress as a result of the difference in cumulative slip or the presence of higher-strength material. The stress drops do not directly correlate with the strength of the proposed wall-rock geology at depth, suggesting that the relationship between fault strength and the strength of the wall rock is complex.

Bulletin of the Seismological Society of America↗