Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Structural Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources
USGS1997

Sedimentary history and mass flow structures of Chryse and Acidalia Planitiae, Mars

Geologic mapping and crater counting in Chryse and Acidalia Planitiae (GAP) reveal five major sedimentary deposits of Hesperian to Early Amazonian age, including (1) a mass flow deposited during the Early Hesperian near Deuteronilus Mensae (northeast of the map region) that may have resulted from the carving of Kasei Valles, >3000 km southwest of the exposed part of the deposit; (2) knobby plains material consisting of channel (likely; from Simud and Tiu Valles and possibly Ares and Shalbatana Valles) and mass-wasting deposits in central and eastern CAP; (3) material largely from Maja and Ares Valles emplaced in at least western and southern CAP (outcrops in southern Chryse Planitia developed thermokarst); (4) a thin mass flow covering much of southern Chryse Planitia that emanated from Simud and Tiu Valles; and (5) a thick, extensive (perhaps >3500 km across) mass flow deposit in central and northern CAP derived from accumulation and backflow of the preceding thin mass flow or perhaps melting of polar deposits. Other possible deposits may not be recognizable owing to burial by younger materials or a lack of morphologic signature. Various associated landforms appear to be consistent with the mass flow interpretations, including lobate and linear scarps along deposit edges, fractures related to desiccation of thick sediments, troughs, and ridges near the edges of the deposit indicative of secondary mass movement and deformation, pitted domes and fissure-fed flows possibly formed by sedimentary (mud) eruptions, and longitudinal channel grooves perhaps formed by roller vortices. No convincing evidence for paleoshorelines or stagnant ice sheets is found in CAP. These findings suggest that mass flow and hyperconcentrated flooding may have been the predominant processes of outflow-channel dissection in CAP. Elsewhere in the northern plains, similar landforms are prevalent. The mass flow interpretation does not require either multiple episodes of extraordinarily high water-discharge rates achieved by freeing huge volumes of water from the crust, repetitive recycling of immense volumes of water into highland aquifers at the heads of Chryse channels, or profound climate change. Mars Pathfinder will most likely land on and inspect the surface of the thin mass flow that originated from the canyons of Simud and Tiu Valles.

Journal of Geophysical Research E: Planets↗
USGS2017

Confirmation of the southwest continuation of the Cat Square terrane, southern Appalachian Inner Piedmont, with implications for middle Paleozoic collisional orogenesis

Detailed geologic mapping, U-Pb zircon geochronology and whole-rock geochemical analyses were conducted to test the hypothesis that the southwestern extent of the Cat Square terrane continues from the northern Inner Piedmont (western Carolinas) into central Georgia. Geologic mapping revealed the Jackson Lake fault, a ∼15 m-thick, steeply dipping sillimanite-grade fault zone that truncates lithologically distinct granitoids and metasedimentary units, and roughly corresponds with a prominent aeromagnetic lineament hypothesized to represent the southern continuation of the terrane-bounding Brindle Creek fault. Results of U-Pb SHRIMP geochronology indicate Late Ordovician to Silurian granitoids (444–439 Ma) occur exclusively northwest of the fault, whereas Devonian (404–371 Ma) granitoids only occur southeast of the fault. The relatively undeformed Indian Springs granodiorite (three individual bodies dated 317–298 Ma) crosscuts the fault and occurs on both sides, which indicates the Jackson Lake fault is a pre-Alleghanian structure. However, detrital zircon signatures from samples southeast of the Jackson Lake fault reveal dominant Grenville provenance, in contrast to Cat Square terrane detrital zircon samples from the northern Inner Piedmont, which include peri-Gondwanan (600–500 Ma) and a prominent Ordovician-Silurian (∼430 Ma) signature. We interpret the rocks southeast of the Jackson Lake fault to represent the southwestern extension of the Cat Square terrane primarily based on the partitioning of granitoid ages and lithologic distinctions similar to the northern Inner Piedmont. Data suggest Cat Square terrane metasedimentary rocks were initially deposited in a remnant ocean basin setting and developed into an accretionary prism in front of the approaching Carolina superterrane, ultimately overridden by it in Late Devonian to Early Mississippian time. Burial to >20 km resulted in migmatization of lower plate rocks, forming an infrastructure beneath the Carolina superterrane suprastructure. Provenance patterns support ∼250 km of Devonian dextral translation of the composite Inner Piedmont, which places the northern portion of the Inner Piedmont adjacent to a suite of ∼430 Ma plutons in the Virginia Blue Ridge during deposition. The megascopic thrust-nappe structural style of the northern Inner Piedmont, combined with southwest-directed lateral extrusion at mid-crustal depths, may reconcile differences in timing of metamorphism between the Carolina and central Georgia Inner Piedmont and structural contrasts between the Brindle Creek and Jackson Lake faults.

American Journal of Science↗
USGS1990

Studies of angiospermous woods in Australian brown coal by nuclear magnetic resonance and analytical pyrolysis: new insight into early coalification

Many Tertiary coals contain abundant fossilized remains of angiosperms, which commonly dominated the ancient peat-swamp environments; modern analogs of such swamps can be found in tropical and subtropical regions of the world. Comparisons of angiospermous wood from Australian brown coal with similar wood buried in modern peat swamps of Indonesia have provided some new insights into coalification reactions. These comparisons were made by using solid-state 13 C nuclear magnetic resonance (NMR) techniques and pyrolsis-gas chromatography-mass spectrometry (py-gc-ms). These two modern techniques are especially suited for detailed structural evaluation of the complex macromolecules in coal. The earliest transformation (peatification) of organic matter in angiospermous wood is the degradation and removal of cellulosic components and the concomitant selective preservation of lignin-derived components. The angiospermous lignin that becomes enriched in wood as a result of cellulose degradation also is modified by coalification reactions; this modification, however, does not involve degradation and removal of the lignin. Rather, the early coalification process transforms the lignin phenols (guiacyl and syringyl) to eventually yield the aromatic structures typically found in brown coal. One such transformation, which is determined from NMR data, involves the cleavage of aryl-ether bonds that link guaiacyl and syringyl units in lignin, and this transformation leads to the formation of free lignin phenols. Another transformation, which is also determined from the NMR data, involves the loss of methoxyl groups, probably via demethylation, to produce catechol-like structures. Coincident with ether-cleavage and demethylation, the aromatic rings derived from lignin phenols become more carbon-substituted and cross linked, as determined by dipolar-dephasing NMR studies. This cross linking is probably responsible for preventing the lignin phenols, which are freed from the lignin macromolecule by ether cleavage, from being removed from the coal by dissolution. Pyrolysis data suggest that the syringyl units are altered more readily than are guaiacyl units, and this difference in resistance leads to an enrichment of the guaiacyl units in fossil angiospermous woods. Many of the coalification reactions noted above occur to some degree in all angiospermous fossil wood examined; however, some significant differences are observed in the degree of coalification of the fossil wood samples from the same burial depth in the brown coal. These differences indicate that the depth and duration of burial are probably not entirely responsible for the variations in degree of coalification. Different rates of degradation in peat may have contributed to the variations in the apparent degree of coalification; some woods may have been altered more rapidly at the peat stage than others. Although preliminary, this systematic study of botanically related wood in peat and coal results in a more detailed differentiation of coalification reactions than have previous investigations. The combined use of solid-state 13 C NMR and py-gc-ms has facilitated this detailed insight into the coalification of angiospermous wood.

International Journal of Coal Geology↗
USGS2003

The crustal structure from the Altai Mountains to the Altyn Tagh fault, northwest China

[1] We present a new crustal section across northwest China based on a seismic refraction profile and geologic mapping. The 1100‐km‐long section crosses the southern margin of the Chinese Altai Mountains, Junggar Accretional Belt and eastern Junggar basin, easternmost Tianshan Mountains, and easternmost Tarim basin. The crustal velocity structure and Poisson's ratio (σ), which provide a constraint on crustal composition, were determined from P and S wave data. Despite the complex geology, the crustal thickness along the entire profile is nearly uniform at 50 km. The thickest crust (56 km) occurs at the northern end of the profile beneath the Altai Mountains and the thinnest (46 km) crust is beneath the Junggar basin. Beneath surficial sediments, the crust is found to have three layers with P wave velocities ( V p ) of 6.0–6.3, 6.3–6.6, and 6.9–7.0 km/s, respectively. The southern half of the profile, including the eastern Tianshan Mountains and eastern margin of the Tarim basin, shows low P wave velocities and σ = 0.25 to a depth of 30 km, which suggests a quartz‐rich, granitic upper crustal composition. The northern half of the profile below the Altai Mountains and Junggar Accretional Belt has a higher Poisson's ratio of σ = 0.26–0.27 to a depth of 30 km, indicative of an intermediate crustal composition. The entire 1100‐km‐long profile is underlain by a 15–30 km thick high velocity (6.9–7.0 km/s; σ = 0.26–0.28) lower‐crustal layer that we interpret to have a bulk composition of mafic granulite. At the southern end of the profile, a 5‐km‐thick midcrustal low‐velocity layer ( V p = 5.9 km/s, σ = 0.25) underlies the Tianshan and the region to the south, and may be indicative of a near‐horizontal detachment interface. P n velocities are ∼7.7–7.8 km/s between the Tianshan and the Junggar basin, and ∼7.9–8.0 km/s below the Altai Mountains and eastern margin of the Tarim basin. We interpret the consistent three‐layer stratification of the crust to indicate that the crust has undergone partial melting and differentiation after Paleozoic terrane accretion. The thickness (50 km) of the crust appears to be related to compression resulting from the Indo‐Asian collision.

Altai Mountains↗
USGS2016

Contemporary deformation in the Yakima fold and thrust belt estimated with GPS

Geodetic, geologic and palaeomagnetic data reveal that Oregon (western USA) rotates clockwise at 0.3 to 1.0° Ma −1 (relative to North America) about an axis near the Idaho–Oregon–Washington border, while northeast Washington is relatively fixed. This rotation has been going on for at least 15 Ma. The Yakima fold and thrust belt (YFTB) forms the boundary between northern Oregon and central Washington where convergence of the clockwise-rotating Oregon block is apparently accommodated. North–south shortening across the YFTB has been thought to occur in a fan-like manner, increasing in rate to the west. We obtained high-accuracy, high-density geodetic GPS measurements in 2012–2014 that are used with earlier GPS measurements from the 1990s to characterize YFTB kinematics. The new results show that the deformation associated with the YFTB starts at the Blue Mountains Anticline in northern Oregon and extends north beyond the Frenchman Hills in Washington, past the epicentre of the 1872 M w 7.0 Entiat earthquake to 49°N. The north–south strain rate across the region is 2 to 3 × 10 −9 yr −1 between the volcanic arc and the eastern edge of the YFTB (241.0°E); east of there it drops to about 10 −9 yr −1 . At the eastern boundary of the YFTB, faults and earthquake activity are truncated by a north-trending, narrow zone of deformation that runs along the Pasco Basin and Moses Lake regions near 240.9°E. This zone, abutting the Department of Energy Hanford Nuclear Reservation, accommodates about 0.5 mm yr −1 of east to northeast shortening. A similar zone of N-trending transpression is seen along 239.9°E where there is a change in the strike of the Yakima folds. The modern deformation of the YFTB is about 600 km wide from south to north and internally may be controlled by pre-existing crustal structure.

Geophysical Journal International↗
USGS1994

Contributions to a shallow aquifer study by reprocessed seismic sections from petroleum exploration surveys, eastern Abu Dhabi, United Arab Emirates

The US Geological Survey, in cooperation with the National Drilling Company of Abu Dhabi, is conducting a 4-year study of the fresh and slightly saline groundwater resources of the eastern Abu Dhabi Emirate. Most of this water occurs in a shallow aquifer, generally less than 150 m deep, in the Al Ain area. A critical part of the Al Ain area coincides with a former petroleum concession area where about 2780 km of vibroseis data were collected along 94 seismic lines during 1981–1983. Field methods, acquistion parameters, and section processing were originally designed to enhance reflections expected at depths ranging from 5000 to 6000 m, and subsurface features directly associated with the shallow aquifer system were deleted from the original seismic sections. The original field tapes from the vibroseis survey were reprocessed in an attempt to extract shallow subsurface information (depths less than 550 m) for investigating the shallow aquifer. A unique sequence of reproccessing parameters was established after reviewing the results from many experimental tests. Many enhancements to the resolution of shallow seismic reflections resulted from: (1) application of a 20-Hz, low-cut filter; (2) recomputation of static corrections to a datum nearer the land surface; (3) intensive velocity analyses; and (4) near-trace muting analyses. The number, resolution, and lateral continuity of shallow reflections were greatly enhanced on the reprocessed sections, as was the delineation of shallow, major faults. Reflections on a synthetic seismogram, created from a borehole drilled to a depth of 786 m on seismic line IQS-11, matched precisely with shallow reflections on the reprocessed section. The 33 reprocessed sections were instrumental in preparing a map showing the major structural features that affect the shallow aquifer system. Analysis of the map provides a better understanding of the effect of these shallow features on the regional occurrence, movement, and quality of groundwater in the concession area. Results from this study demonstrate that original seismic field tapes collected for deep petroleum exploration can be reprocessed to explore for groundwater.

Journal of Applied Geophysics↗
USGS2012

Geophysical constraints on Washington convergent margin structure

Gravity and magnetic maps of western Washington reveal the lateral structure and fabric of the Washington Coast Range, Puget Basin, and southern Washington Cascade Range. The magnetic and gravity maps show large amplitude positive anomalies associated with the shallow but largely buried section of Washington Coast Range mafic rocks which are separated by negative anomalies over deep sedimentary basins. The positive anomalies indicate that the Coast Range mafic basement extends farther east than previously thought, at least as far east as the longitude of Seattle. Linear and steep gravity and magnetic gradients indicate many unmapped, often buried faults in the Washington Coast Range Province. Magnetic highs are also associated with mapped batholiths in the Cascade arc. Several magnetic highs observed east of the Coast Range rocks and west of these batholiths may be associated with buried Tertiary plutons or ophiolites. Two-dimensional gravity and magnetic modeling constrained with geological and other geophysical data indicate that the Coast Range Province rocks are about 1 km thick at the coast, thickening to as much as 30 km near their postulated eastern edge. A maximum boundary on the average density of the upper 15–20 km of the rocks that compose the Coast Range Province of 2920 kg/m 3 was established by the modeling, suggesting a composition largely of basalt and gabbro with little interbedded sediments. Under these rocks may be mantle or a subduction complex composed of dense mafic, ultramafic, and sedimentary rocks like that proposed to underlie Vancouver Island. Previous gravity models of the Washington margin include lower densities for the proposed subduction complex than for Vancouver Island, suggesting a lower component of mafic and ultramafic rocks than the rocks underlying Vancouver Island. However, my Washington model requires that the proposed subduction complex be more dense than the trench sediments and, therefore, that material denser than sediments be incorporated within it. The absence of continental mantle and the modeled wedge shape of the Coast Range Province upper crust suggest that erosion of the bottom of the overriding plate by subduction processes may have occurred.

Washington↗
USGS1984

Geology of El Chichon volcano, Chiapas, Mexico

The (pre-1982) 850-m-high andesitic stratovolcano El Chicho??n, active during Pleistocene and Holocene time, is located in rugged, densely forested terrain in northcentral Chiapas, Me??xico. The nearest neighboring Holocene volcanoes are 275 km and 200 km to the southeast and northwest, respectively. El Chicho??n is built on Tertiary siltstone and sandstone, underlain by Cretaceous dolomitic limestone; a 4-km-deep bore hole near the east base of the volcano penetrated this limestone and continued 770 m into a sequence of Jurassic or Cretaceous evaporitic anhydrite and halite. The basement rocks are folded into generally northwest-trending anticlines and synclines. El Chicho??n is built over a small dome-like structure superposed on a syncline, and this structure may reflect cumulative deformation related to growth of a crustal magma reservoir beneath the volcano. The cone of El Chicho??n consists almost entirely of pyroclastic rocks. The pre-1982 cone is marked by a 1200-m-diameter (explosion?) crater on the southwest flank and a 1600-m-diameter crater apparently of similar origin at the summit, a lava dome partly fills each crater. The timing of cone and dome growth is poorly known. Field evidence indicates that the flank dome is older than the summit dome, and K-Ar ages from samples high on the cone suggest that the flank dome is older than about 276,000 years. At least three pyroclastic eruptions have occurred during the past 1250 radiocarbon years. Nearly all of the pyroclastic and dome rocks are moderately to highly porphyritic andesite, with plagioclase, hornblende and clinopyroxene the most common phenocrysts. Geologists who mapped El Chicho??n in 1980 and 1981 warned that the volcano posed a substantial hazard to the surrounding region. This warning was proven to be prophetic by violent eruptions that occurred in March and April of 1982. These eruptions blasted away nearly all of the summit dome, blanketed the surrounding region with tephra, and sent pyroclastic flows down radial drainages on the flanks of the cone; about 0.3 km3 of material (density of all products normalized to 2.6 g cm-3) was erupted. More debris entered the stratosphere than from any other volcanic eruption within at least the past two decades. Halite and a calcium sulfate mineral (anhydrite?) recovered from the stratospheric cloud, and anhydrite as a common accessory mineral in 1982 juvenile erupted products may reflect contamination of El Chicho??n magma by the evaporite sequence revealed by drilling. ?? 1984.

Journal of Volcanology and Geothermal Research↗
USGS2004

Geophysical modeling of the northern Appalachian Brompton-Cameron, Central Maine, and Avalon terranes under the New Jersey Coastal Plain

A regional terrane map of the New Jersey Coastal Plain basement was constructed using seismic, drilling, gravity and magnetic data. The Brompton-Cameron and Central Maine terranes were coalesced as one volcanic island arc terrane before obducting onto Laurentian, Grenville age, continental crust in the Taconian orogeny [Rankin, D.W., 1994. Continental margin of the eastern United States: past and present. In: Speed, R.C., (Ed.), Phanerozoic Evolution of North American Continent-Ocean Transitions. DNAG Continent-Ocean Transect Volume. Geological Society of America, Boulder, Colorado, pp. 129-218]. Volcanic island-arc rocks of the Avalon terrane are in contact with Central Maine terrane rocks in southern Connecticut where the latter are overthrust onto the Brompton-Cameron terrane, which is thrust over Laurentian basement. Similarities of these allochthonous island arc terranes (Brompton-Cameron, Central Maine, Avalon) in lithology, fauna and age suggest that they are faulted segments of the margin of one major late Precambrian to early Paleozoic, high latitude peri-Gondwana island arc designated as "Avalonia", which collided with Laurentia in the early to middle Paleozoic. The Brompton Cameron, Central Maine, and Avalon terranes are projected as the basement under the eastern New Jersey Coastal Plain based on drill core samples of metamorphic rocks of active margin/magmatic arc origin. A seismic reflection profile across the New York Bight traces the gentle dipping (approximately 20 degrees) Cameron's Line Taconian suture southeast beneath allochthonous Avalon and other terranes to a 4 sec TWTT depth (approximately 9 km) where the Avalonian rocks are over Laurentian crust. Gentle up-plunge (approximately 5 degrees) projections to the southwest bring the Laurentian Grenville age basement and the drift-stage early Paleozoic cover rocks to windows in Burlington Co. at approximately 1 km depth and Cape May Co. at approximately 2 km depths. The antiformal Shellburne Falls and Chester domes and Chain Lakes-Pelham dome-Bronson Hill structural trends, and the synformal Connecticut Valley-Gaspe structural trend can be traced southwest into the New Jersey Coastal Plain basement. A Mesozoic rift basin, the "Sandy Hook basin", and associated eastern boundary fault is identified, based upon gravity modeling, in the vicinity of Sandy Hook, New Jersey. The thickness of the rift-basin sedimentary rocks contained within the "Sandy Hook basin" is approximately 4.7 km, with the basin extending offshore to the east of the New Jersey coast. Gravity modeling indicates a deep rift basin and the magnetic data indicates a shallow magnetic basement caused by magnetic diabase sills and/or basalt flows contained within the rift-basin sedimentary rocks. The igneous sills and/or flows may be the eastward continuation of the Watchung and Palisades bodies. ?? 2004 Elsevier Ltd. All rights reserved.

Journal of Geodynamics↗
USGS2007

Metamorphic and structural history of continental crust at a Mesozoic collisional margin, the Ruby terrane, central Alaska

The Ruby terrane is an elongate fragment of continental crustal rocks that is structurally overlain by thrust slices of oceanic crust. Our results from the Kokrines Hills, in the south‐central part of the Ruby terrane, demonstrate that the low‐angle schistose fabric formed under high‐ P /low‐ T conditions, at peak conditions of 10.8‐13.2 kbar and 425‐550° C, consistent with the rare occurrence of glaucophane. White mica 40 Ar/ 39 Ar cooling ages from these blueschists indicate that the metamorphism occurred prior to 144 ± 1 Ma. The blueschist facies assemblages are partially replaced by greenschist facies assemblages in the eastern Kokrines Hills. In contrast, in the central and western Kokrines Hills, upper amphibolite to lower granulite facies metamorphism associated with extensive late Early Cretaceous plutonism has completely overprinted any evidence of an earlier high‐ P/T metamorphic history. Deformation accompanying the plutonism produced recumbent isoclinal folds in the plutonic rocks and pelitic gneisses of the wallrock; decompression reactions in the pelitic gneisses suggest that the deformation occurred during exhumation. Thermochronological data bracket the time of intrusion and cooling below 500° C between 118 ± 3 and 109 ± 1 Ma. Our data from the schists of the Ruby terrane support the general assumption of many authors that the Ruby terrane was subducted beneath an oceanic island arc. This tectonic history is similar to that described for other large continental crustal blocks in northern and central Alaska, in the Brooks Range, Seward Peninsula and Yukon‐Tanana Upland. The current orientation of the Ruby terrane at an oblique angle to these other crustal blocks and to the Cordilleran trend is due to post‐collisional tectonic processes that have greatly modified the original continental margin.

Alaska↗
USGS2012

The crustal structure of the Wrangellia Terrane along the East Glenn Highway, eastern‐southern Alaska

Recently acquired seismic refraction data from eastern‐southern Alaska provide new information on the structure and composition of the Wrangellia and adjacent terranes. The data comprise a 160‐km‐long refraction profile along the East Glenn (Tok‐Cutoff) Highway that was collected as part of the U.S. Geological Survey's multidisciplinary Trans‐Alaska Crustal Transect program. The upper 3 km of the Wrangellia terrane and associated rocks is characterized by low compressional wave velocities (V p = 1.9, 3.3, 4.6, 5.6 km s −1 ) and high‐velocity gradients common to most onshore seismic refraction profiles. There is also clear seismic expression of the West Fork fault system as a steep, down‐to‐the‐southwest fault that separates the Peninsular terrane to the southwest and the metamorphic complex of Gulkana River to the northeast. In contrast, no seismic expression occurs for the Paxson Lake fault, which separates the Wrangellia terrane from the metamorphic complex of Gulkana River. Adjacent to the Denali fault, within the Wrangellia terrane, two high‐velocity bodies (V p = 6.6 km s −1 ) occur in the upper crust. One of these extends to ∼10‐km depth and correlates with a late Paleozoic dioritic complex, suggesting that the Wrangellia terrane is at least 10 km thick in this part of Alaska. From 5 to 23 km depth, the crust appears seismically homogeneous, with velocity increasing from V p = 6.2 to V p = 6.6 km s −1 . Beneath this level, the crust is less well resolved, although evidence exists for a low‐velocity zone between 23 and 26 km and a possible southwest dipping interface at 35 km. No identifiable mantle refraction or reflection is observed, possibly indicating a crust as thick as 55 km. The relatively low seismic velocities in the upper 23 km of the crust compare favorably with laboratory‐measured velocities on pelitic schists and intermediate‐composition plutonic rocks (granites and granodiorites), both of which are recognized in Wrangellia. We interpret the seismic velocities to indicate that silicic‐to‐intermediate‐composition rocks are important constituents of the basement of this part of Wrangellia. Geologic evidence indicates that the Alaskan part of the Wrangellia terrane is a Paleozoic and Mesozoic island arc: our seismic evidence indicates it may have been built mostly on continental crust as opposed to the fragment of Wrangellia from Vancouver Island which was probably built on oceanic crust.

Alaska↗
USGS2007

Differentiating pedogenesis from diagenesis in early terrestrial paleoweathering surfaces formed on granitic composition parent materials

Unconformable surfaces separating Precambrian crystalline basement and overlying Proterozoic to Cambrian sedimentary rocks provide an exceptional opportunity to examine the role of primitive soil ecosystems in weathering and resultant formation of saprolite (weathered rock retaining rock structure) and regolith (weathered rock without rock structure), but many appear to have been affected by burial diagenesis and hydrothermal fluid flow, leading some researchers to discount their suitability for such studies. We examine one modern weathering profile (Cecil series), four Cambrian paleoweathering profiles from the North American craton (Squaw Creek, Franklin Mountains, Core SQ-8, and Core 4), one Neoproterozoic profile (Sheigra), and one late Paleoproterozoic profile (Baraboo), to test the hypothesis that these paleoweathering profiles do provide evidence of primitive terrestrial weathering despite their diagenetic and hydrothermal overprinting, especially additions of potassium. We employ an integrated approach using (1) detailed thin-section investigations to identify characteristic pedogenic features associated with saprolitization and formation of well-drained regoliths, (2) electron microprobe analysis to identify specific weathered and new mineral phases, and (3) geochemical mass balance techniques to characterize volume changes during weathering and elemental gains and losses of major and minor elements relative to the inferred parent materials. There is strong pedogenic evidence of paleoweathering, such as clay illuviation, sepic-plasmic fabrics, redoximorphic features, and dissolution and alteration of feldspars and mafic minerals to kaolinite, gibbsite, and Fe oxides, as well as geochemical evidence, such as whole-rock losses of Na, Ca, Mg, Si, Sr, Fe, and Mn greater than in modern profiles. Evidence of diagenesis includes net additions of K, Ba, and Rb determined through geochemical mass balance, K-feldspar overgrowths in overlying sandstone sections, and K-feldspars with reaction rims in weathered basement. The sub-Cambrian paleoweathering profiles formed on granite are remarkably similar to modern weathering profiles formed on granite, in spite of overprinting by potassium diagenesis. ?? 2007 by The University of Chicago. All rights reserved.

Journal of Geology↗
USGS2012

Seismic constraints on the nature of lower crustal reflectors beneath the extending Southern Transition Zone of the Colorado Plateau, Arizona

We determine the reflection polarity and exploit variations in P and S wave reflectivity and P wave amplitude versus offset (AVO) to constrain the origin of lower crustal reflectivity observed on new three-component seismic data recorded across the structural transition of the Colorado Plateau. The near vertical incidence reflection data were collected by Stanford University in 1989 as part of the U.S. Geological Survey Pacific to Arizona Crustal Experiment that traversed the Arizona Transition Zone of the Colorado Plateau. The results of independent waveform modeling methods are consistent with much of the lower crustal reflectivity resulting from thin, high-impedance layers. The reflection polarity of the cleanest lower crustal events is positive, which implies that these reflections result from high-velocity contrasts, and the waveform character indicates that the reflectors are probably layers less than or approximately equal to 200 m thick. The lower crustal events are generally less reflective to incident S waves than to P waves, which agrees with the predicted behavior of high-velocity mafic layering. Analysis of the P wave AVO character of lower crustal reflections demonstrates that the events maintain a constant amplitude with offset, which is most consistent with a mafic-layering model. One exception is a high-amplitude (10 dB above background) event near the base of lower crustal reflectivity which abruptly decreases in amplitude at increasing offsets. The event has a pronounced S wave response, which along with its negative AVO trend is a possible indication of the presence of fluids in the lower crust. The Arizona Transition Zone is an active but weakly extended province, which causes us to discard models of lower crustal layering resulting from shearing because of the high degree of strain required to create such layers. Instead, we favor horizontal basaltic intrusions as the primary origin of high-impedance reflectors based on (1) The fact that most xenoliths in eruptive basalts of the Transition Zone are of mafic igneous composition, (2) indications that a pulse of magmatic activity crossed the Transition Zone in the late Tertiary period, and (3) the high regional heat flow observed in the Transition Zone. The apparent presence of fluids near the base of the reflective zone may indicate a partially molten intrusion. We present a mechanism by which magma can be trapped and be induced to intrude horizontally at rheologic contrasts in extending crust.

Arizona↗
USGS2002

High-resolution aeromagnetic mapping of volcanic terrain, Yellowstone National Park

High-resolution aeromagnetic data acquired over Yellowstone National Park (YNP) show contrasting patterns reflecting differences in rock composition, types and degree of alteration, and crustal structures that mirror the variable geology of the Yellowstone Plateau. The older, Eocene, Absaroka Volcanic Supergroup, a series of mostly altered, andesitic volcanic and volcaniclastic rocks partially exposed in mountains on the eastern margin of YNP, produces high-amplitude, positive magnetic anomalies, strongly contrasting with the less magnetic, younger, latest Cenozoic, Yellowstone Plateau Group, primarily a series of fresh and variably altered rhyolitic rocks covering most of YNP. The Yellowstone caldera is the centerpiece of the Yellowstone Plateau; part of its boundary can be identified on the aeromagnetic map as a series of discontinuous, negative magnetic anomalies that reflect faults or zones along which extensive hydrothermal alteration is localized. The large-volume rhyolitic ignimbrite deposits of the 0.63-Ma Lava Creek Tuff and the 2.1-Ma Huckleberry Ridge Tuff, which are prominent lithologies peripheral to the Yellowstone caldera, produce insignificant magnetic signatures. A zone of moderate amplitude positive anomalies coincides with the mapped extent of several post-caldera rhyolitic lavas. Linear magnetic anomalies reflect the rectilinear fault systems characteristic of resurgent domes in the center of the caldera. Peripheral to the caldera, the high-resolution aeromagnetic map clearly delineates flow unit boundaries of pre- and post-caldera basalt flows, which occur stratigraphically below the post-caldera rhyolitic lavas and are not exposed extensively at the surface. All of the hot spring and geyser basins, such as Norris, Upper and Lower Geyser Basins, West Thumb, and Gibbon, are associated with negative magnetic anomalies, reflecting hydrothermal alteration that has destroyed the magnetic susceptibility of minerals in the volcanic rocks. Within Yellowstone Lake, which is mostly within the Yellowstone caldera, aeromagnetic lows also are associated with known hydrothermal activity in the lake. Many of the magnetic lows extend beyond the areas of alteration and hot springs, suggesting a more extensive currently active or fossil hydrothermal system than is currently mapped. Steep magnetic gradients, suggesting faults or fractures, bound the magnetic lows. This implies that fractures localize the hot springs. Magnetic gradient trends reflect the mapped Basin and Range structural trends of north and northwest, as well as northeasterly trends that parallel the regional trend of the Snake River Plain and the track of the Yellowstone hot spot which follow the Precambrian structural grain. These trends are found both at small scales such as in hydrothermal basins and at more regional fault scales, which suggests that the regional stress field and reactivated older structures may exert some control on localization of hydrothermal activity. ?? 2002 Elsevier Science B.V. All rights reserved.

Journal of Volcanology and Geothermal Research↗
USGS2012

Active tectonic and magmatic processes beneath Long Valley Caldera, eastern California: An overview

Geological, chronological, and structural studies of the Long Valley-Mono/Inyo Craters area document a long history of related volcanic eruptions and earthquakes controlled by regional extensional tectonics of the Basin and Range province. This activity has persisted for hundreds of thousands of years and is likely to continue. The Long Valley magma chamber had a volume approaching 3000 km 3 prior to its climatic caldera-forming eruption 0.7 m.y. ago but has been reduced to less than a third of this volume by cooling, eruption, and crystallization. Seismic evidence indicates that the main mass of the present Long Valley magma chamber is about 10 km in diameter and that its roof is 8–10 km deep with smaller cupolas as shallow as 4–5 km. Although a chamber of this size is probably capable of producing an eruption approaching 30 km 3 of lava, the record over the past 0.5 m.y. suggests that eruptions of 1 km 3 or less are far more likely. Models proposed for the current ground uplift and seismicity within the caldera require inflation of 0.1–0.2 km 3 by additional magma since mid-1979, and some models suggest that inflation was accompanied by injection of a thin dike or dikes (probably of silicic magma) into the ring fracture zone beneath the south moat. Several of the M 5.8–6.2 earthquakes that occurred in the region beginning in 1978 had non-double-couple focal mechanisms. Whether these unusual mechanisms indicate injection of mafic (low-viscosity) magma at midcrustal depths in the Sierra Nevada block south of the caldera remains debatable. Studies of calderas of various ages throughout the world indicate that episodes of unrest are relatively common and do not invariably culminate in eruptions. Although current unrest is concentrated in the south moat of Long Valley caldera, the Inyo/Mono Craters probably hold a greater potential for producing an eruption in the foreseeable future. The Inyo/Mono Craters have erupted at 500-year intervals over the past 2000–3000 years, whereas the Long Valley magma chamber has erupted at about 200,000-year intervals over the past 700,000 years. In either case, a major earthquake near the caldera could strongly influence the course of volcanic activity.

Journal of Geophysical Research Solid Earth↗
USGS1976

Land subsidence and aquifer-system compaction in the San Jacinto Valley, Riverside County, California - A progress report

Widespread subsidence continues in the San Jacinto structural trough as water levels continue to decline. Subsidence is due principally to the compaction of water-bearing deposits as effective stresses are increased by artesian-head decline. Other possible contributory causes of subsidence are (1) local or regional tectonic adjustments and graben downfaulting, (2) natural compaction of deep water-bearing deposits below the bottom of well casings, and (3) continuing compaction of surficial deposits due to causes other than artesian-head decline. A careful analysis of 4 yr of correlative records of waterlevel, extensometer, and land-surface changes suggests three types of vertical ground movement occurring at the 4S/1W-21N2 recorder site near the San Jacinto reservoir site. The reservoir was drained in October 1973. Listed in descending order of magnitude these are (1) an elastic undulation of the land surface of about 0.06 ft (0.02 m) per year in close response to the roughly 50 ft (15 m) of seasonal water-level fluctuations, (2) a long-term permanent compaction of the deposits in the 0-1,237-ft (0-377-m) zone of about 0.04 ft (0.01 m) per year, and (3) a deep settlement of deposits below the 1,237-ft (377-m) extensometer anchor of 0.01-0.02 ft (0.003-0.006 m) per year, probably caused by continuing downfaulting in the graben trough. The specific compaction of the aquifer system at this site from 1970 to 1974 was about 1.3x 10 -2 (units of compaction per unit of increase in applied stress). The specific, expansion during this period decreased progressively from 1.29x 10 -3 (units of expansion per unit of stress decrease) in 1970-71 to 0.95x10 -3 in 1973-74, suggesting that excess pore pressures in the slow-draining aquitards were not completely dissipated each year.

California↗
USGS2022

Perspectives on premetamorphic stratabound tourmalinites

Stratabound tourmalinites are metallogenically important rocks that locally show a close spatial association with diverse types of mineralization, especially volcanogenic massive sulfides (VMS) and clastic-dominated (CD) Zn-Pb deposits. These tourmalinite occurrences pan the geologic record from Eoarchean to Jurassic. Host lithologies are dominated by clastic metasedimentary rocks but in some areas include metavolcanic rocks, marble, or metaevaporites. Stratabound and stratiform (conformable) tourmalinites commonly display sedimentary structures such as graded beds, cross-beds, and rip-up clasts. In most cases, field and microtextural relationships are consistent with a synsedimentary to the early diagenetic introduction of boron as a precursor to tourmaline formation. Whole-rock geochemical data for major, trace, and rare earth elements (REE) provide valuable insights into tourmalinite origins. Al-normalized values relative to those for least-altered host metasedimentary rocks suggest that tourmalinites in proximal settings at or near hydrothermal vent sites characterized by high fluid/rock regimes (e.g., Sullivan Pb-Zn-Ag deposit, Canada) have very different signatures than those in low fluid/rock, distal settings (e.g., Broken Hill Pb-Zn-Ag deposit, Australia). The high fluid/rock regimes at Sullivan show large mass changes of +60 % for Mg and +180 % for Mn, as well as large variations in abundances of light and middle REE. In contrast, tourmalinite formation in low fluid/rock regimes yields minimal Al-normalized changes in major elements, trace elements, and REE. Boron isotope values of tourmalinite-hosted tourmaline vary widely from -26.1 to +27.5 ‰, and are attributed mainly to boron sources (e.g., sediments, evaporites) with generally minor influence from processes such as formational temperature, fluid/rock ratio, and secular variation in seawater δ 11 B values. Laterally extensive stratiform tourmalinites formed mainly by syngenetic or early diagenetic processes on or beneath the seafloor. The syngenetic process is attributed to the interaction of vented B-rich brines with aluminous minerals in sediments, whereas the diagenetic process involves the selective replacement of aluminous sediments by B-rich fluids. Modern examples of tourmalinites, as yet undiscovered, may exist in metalliferous sediments of the Red Sea and the eastern Pacific Ocean, in altered volcaniclastic sediments within active seafloor-hydrothermal systems of the South Pacific, and in hydrothermal mounds and vents associated with mafic sill complexes in extensional basins as in the North Sea and South China Sea. Stratabound tourmalinites that contain base-metal sulfides, high Mn concentrations (>1 wt. % MnO), or positive Eu anomalies can be valuable exploration guides for base-metal sulfide deposits in sedimentary and volcanic terranes.

Journal of Geosciences↗
USGS2015

Microscopical characterization of carbon materials derived from coal and petroleum and their interaction phenomena in making steel electrodes, anodes and cathode blocks for the Microscopy of Carbon Materials Working Group of the ICCP

This paper describes the evaluation of petrographic textures representing the structural organization of the organic matter derived from coal and petroleum and their interaction phenomena in the making of steel electrodes, anodes and cathode blocks. This work represents the results of the Microscopy of Carbon Materials Working Group in Commission III of the International Committee for Coal and Organic Petrology between the years 2009 and 2013. The round robin exercises were run on photomicrograph samples. For textural characterization of carbon materials the existing ASTM classification system for metallurgical coke was applied. These round robin exercises involved 15 active participants from 12 laboratories who were asked to assess the coal and petroleum based carbons and to identify the morphological differences, as optical texture (isotropic/anisotropic), optical type (punctiform, mosaic, fibre, ribbon, domain), and size. Four sets of digital black and white microphotographs comprising 151 photos containing 372 fields of different types of organic matter were examined. Based on the unique ability of carbon to form a wide range of textures, the results showed an increased number of carbon occurrences which have crucial role in the chosen industrial applications. The statistical method used to evaluate the results was based on the “raw agreement indices”. It gave a new and original view on the analysts' opinion by not only counting the correct answers, but also all of the knowledge and experience of the participants. Comparative analyses of the average values of the level of overall agreement performed by each analyst in the exercises during 2009–2013 showed a great homogeneity in the results, the mean value being 90.36%, with a minimum value of 83% and a maximum value of 95%.

International Journal of Coal Geology↗