SEARCH · Geology Reports

Results for “Journal of Open Source Education”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,683 records · Page 19Linked to original sources

USGS2024

Quality of groundwater used for domestic supply in the eastern Sacramento Valley and adjacent foothills, California

Summary More than 2 million Californians rely on groundwater from privately owned domestic wells for drinking-water supply. This report summarizes a water-quality survey of domestic and small-system drinking-water supply wells in the eastern Sacramento Valley and adjacent foothills where more than 25,000 residents are estimated to use privately owned domestic wells. Study results show that inorganic and organic constituents in groundwater were present above regulatory (maximum contaminant level, MCL) benchmarks for public drinking-water quality in 8 and 3 percent, respectively, of the aquifer area used for domestic drinking-water supply (herein, “domestic groundwater resources”; fig. 1). The only inorganic constituent detected above regulatory benchmarks was arsenic. The only organic constituent exceeding regulatory benchmarks was the fumigant 1,2,3-trichloropropane (1,2,3-TCP). Three additional organic constituents—the disinfection by-product chloroform, the gasoline oxygenate methyl tert -butyl ether (MTBE), and the solvent tetrachloroethene (PCE)—were detected at low concentrations below one-tenth of regulatory benchmarks in 34, 10, and 10 percent of domestic groundwater resources, respectively. Total dissolved solids (TDS), iron, and manganese exceeded non-regulatory aesthetic guidelines for drinking water in 5, 10, and 26 percent of domestic groundwater resources, respectively. Per- and polyfluoroalkyl substances (PFASs) were detected in 29 percent of domestic groundwater resources,with 5 percent exceeding the recently enacted (April 2024) U.S. Environmental Protection Agency MCLs. Total coliform and enterococci bacteria were detected in 13 and 8 percent of domestic groundwater resources, respectively. Redox sensitive constituents in this study included arsenic, manganese, nitrate, and iron. In the lower elevation portions of the eastern Sacramento Valley study area, reducing conditions in groundwater aquifers promote elevated arsenic, iron, and manganese, and conversely lower concentrations of nitrate. The presence of the volatile organic compound (VOC) 1,2,3-TCP was related to its past history in select agricultural land uses (on orchards or vineyards) in the Sacramento Valley; however, unlike in the San Joaquin Valley where orchards and vineyards are more common, its detection frequency was low (only detected in one well in this study). Chloroform was frequently detected in this study at low levels. Chloroform is a disinfection byproduct commonly found in domestic wells treated by shock chlorination. The solvent PCE is among the most frequently detected VOCs in groundwater, which is primarily related to its long history of use and its persistence in groundwater in oxic conditions. The gasoline oxygenate MTBE was a contaminant introduced to groundwater through atmospheric exchange when it was used as a fuel additive to decrease smog inducing emissions from vehicles. Its occurrence in groundwater at low levels is expected and makes it a potentially useful tracer of relatively recent recharge water being withdrawn from wells. The PFASs are anthropogenic chemicals with hundreds of uses, and they have been incorporated into many different products, processes, and applications worldwide. Like MTBE, the occurrence of PFASs in groundwater may be in part due to atmospheric exchange, but there are several other pathways that contribute PFASs to the environment.

California↗

USGS2024

Assessment of long-term changes in surface-water extent within Klamath Marsh, south-central Oregon, 1985–2021

The annual maximum extent of surface water in Klamath Marsh has naturally fluctuated in response to periods of wet and dry conditions in the surrounding basin. Field observations during the 2010s indicate that the annual maximum extent of surface water has been declining and the marsh is not responding to hydrologic inputs as it had historically. This report describes the results of a hydrologic evaluation of Klamath Marsh to characterize and understand multi-year declines in the surface-water extent and increased intermittency of streamflow exiting the marsh. Landsat imagery collected during 1985–2021 was processed to create a time series of annual maximum surface-water extent to assess changes in surface-water inundation within the marsh. A 50-percent decrease in the mean surface area of annual total open-water extent (TOWE) during the latter half of the study period (2003–21) compared to the first half (1985–2003) was observed in this 37-year time-series dataset. The change in open-water extent was offset by a corresponding increase in dry land in the marsh. Time series of streamflow, groundwater level, total annual precipitation, annual mean temperature, and anthropogenic water use and water management were compiled and evaluated to improve understanding of the factors affecting TOWE. Statistically significant downward trends in the regional groundwater table and streamflow into and out of the marsh were identified as well as statistically significant upward trends in annual mean temperature. Statistically significant correlations among TOWE, streamflow, and groundwater level also were identified. The decreasing trends could not be attributed to changes in total annual precipitation or changing anthropogenic groundwater use within the study area. Declines in the open-water extent of Klamath Marsh since 2000 principally are due to a decoupling of the groundwater and surface-water system beneath the marsh because of regional declines in groundwater level. Regional increases in air temperature and the reestablishment of more than 55,000 acres of forested land within the study area have likely contributed to increasing evapotranspiration, leaving less water available for groundwater recharge and stream base flow and resulting in basin-wide declines in streamflow and groundwater levels.

Oregon↗

USGS2025

Cancer risk and estimated lithium exposure in drinking groundwater in the US

Importance Lithium is a naturally occurring element in drinking water and is commonly used as a mood-stabilizing medication. Although clinical studies have reported associations between receiving lithium treatment and reduced cancer risk among patients with bipolar disorder, to our knowledge, the association between environmental lithium exposure and cancer risk has never been studied in the general population. Objectives To evaluate the association between exposure to lithium in drinking groundwater and cancer risk in the general population. Design, Setting, and Participants This cohort study included participants with electronic health record and residential address information but without cancer history at baseline from the All of Us Research Program between May 31, 2017, and June 30, 2022. Participants were followed up until February 15, 2023. Statistical analysis was performed from September 2023 through October 2024. Exposure Lithium concentration in groundwater, based on kriging interpolation of publicly available US Geological Survey data on lithium concentration for 4700 wells across the contiguous US between May 12, 1999, and November 6, 2018. Main Outcome and Measures The main outcome was cancer diagnosis or condition, obtained from electronic health records. Stratified Cox proportional hazards regression models were used to estimate the hazard ratios (HRs) and 95% CIs for risk of cancer overall and individual cancer types for increasing quintiles of the estimated lithium exposure in drinking groundwater, adjusting for socioeconomic, behavioral, and neighborhood-level variables. The analysis was further conducted in the western and eastern halves of the US and restricted to long-term residents living at their current address for at least 3 years. Results A total of 252 178 participants were included (median age, 52 years [IQR, 36-64 years]; 60.1% female). The median follow-up time was 3.6 years (IQR, 3.0-4.3 years), and 7573 incident cancer cases were identified. Higher estimated lithium exposure was consistently associated with reduced cancer risk. Compared with the first (lowest) quintile of lithium exposure, the HR for all cancers was 0.49 (95% CI, 0.31-0.78) for the fourth quintile and 0.29 (95% CI, 0.15-0.55) for the fifth quintile. These associations were found for all cancer types investigated in both females and males, among long-term residents, and in both western and eastern states. For example, for the fifth vs first quintile of lithium exposure for all cancers, the HR was 0.17 (95% CI, 0.07-0.42) in females and 0.13 (95% CI, 0.04-0.38) in males; for long-term residents, the HR was 0.32 (95% CI, 0.15-0.66) in females and 0.24 (95% CI, 0.11-0.52) in males; and the HR was 0.01 (95% CI, 0.00-0.09) in western states and 0.34 (95% CI, 0.21-0.57) in eastern states. Conclusions and Relevance In this cohort study of 252 178 participants, estimated lithium exposure in drinking groundwater was associated with reduced cancer risk. Given the sparse evidence and unknown mechanisms of this association, follow-up investigation is warranted.

contiguous United States↗

USGS2025

Reconstruction of Holocene and Last Interglacial vegetation dynamics and wildfire activity in Southern Siberia

Wildfires are a rapidly increasing threat to boreal forests. While our understanding of the drivers behind wildfires and their environmental impact is growing, it is mostly limited to the observational period. Here we focus on the boreal forests of southern Siberia and exploit a U–Th-dated stalagmite from Botovskaya Cave, located in the upper Lena region of southern Siberia, to document wildfire activity and vegetation dynamics during parts of two warm periods: the Last Interglacial (LIG; specifically part of the Last Interglacial maximum between 124.1 and 118.8 ka) and the Holocene (10–0 ka). Our record is based on levoglucosan (Lev), a biomarker sensitive to biomass burning, and on lignin oxidation products (LOPs) that discriminate between open and closed forest and hard- or softwood vegetation. In addition, we used carbonate carbon stable isotope ratios ( δ 13 C ), which reflect a dominant control of the host rock, to evaluate soil respiration and local infiltration changes. Our LOP data suggest that, during the Last Interglacial, the region around Botovskaya Cave was characterised by open forest, which by ca. 121.5 ka underwent a transition from fire-resistant hardwood to fire-prone softwood. The Lev record indicates that fire activity was high and increased towards the end of Last Interglacial just before 119 ka. In contrast, the Holocene was characterised by a closed-forest environment with mixed hard- and softwood vegetation. Holocene fire activity varied but at a much lower level than during the Last Interglacial. We attribute the changes in wildfire activity during the intervals of interest to the interplay between vegetation and climate. The open forests of the Last Interglacial were more likely to ignite than their closed Holocene equivalents, and their flammability was aided by warmer and drier summers and a stronger seasonal temperature contrast due to the increase in seasonal insolation difference compared to the Holocene. Our comparison of the last two interglacial intervals suggests that, with increasing global temperatures, the boreal forest of southern Siberia may become progressively more vulnerable to higher wildfire activity.

Botovskaya Cave, Siberia↗

USGS2026

Reassessing water availability in the Nile River Basin using satellite-based irrigation water use accounting

Existing estimates of irrigation areas and water use in the Nile River Basin vary widely and are based on inconsistent data and methodologies. This study leverages advances in remote sensing to provide an up-to-date and consistent basin-wide reassessment of water use in the Nile River Basin. Land cover and actual evapotranspiration data from 2013 to 2022 were used to quantify irrigated areas, irrigation water use, and the average naturalized water yield. Across the basin, 7.1 million hectares of irrigated land consume an average of 72.5 ± 2.6 billion cubic meters (BCM) of blue water annually. Egypt and Sudan together account for 92% of the irrigated area and 97% of the irrigation water use. The basin’s average naturalized yield, evaluated at Dongola station, is determined to be between 108 and 114.4 ± 3.2 BCM. Although conservative, this updated analysis indicates the basin’s average naturalized yield is 14%–20% higher than the previous naturalized yield estimate (95 BCM) and 29%–36% higher than the commonly cited observed flow of 84 BCM, which is frequently treated as the total basin-wide available water. Importantly, the study underscores that the 84 BCM represents flow at the Aswan gauging station after upstream consumptive uses, not the total water available in the basin under naturalized conditions. This distinction is critical for accurate water accounting, planning, and governance in this water-scarce basin. This study demonstrates the value of open-source remote sensing resources in data-scarce regions while emphasizing the need for region specific validation and bias correction for improved accuracy.

Nile River Basin↗

USGS1977

Leachate plumes in ground water from Babylon and Islip landfills, Long Island, New York

Landfills operated by the Towns of Babylon and Islip in southwest and central Suffolk County contain urban refuse, incinerated garbage, and scavenger (cesspool) waste; some industrial refuse is deposited at the Babylon site. The Islip landfill was started in 1933, the Babylon landfill in 1947. The landfills are in contact with and discharge leachate into the highly permeable upper glacial aquifer (hydraulic conducitvity 190 to 500 ft/d [feet per day]). The aquifer is 74 feet thick at the Babylon landfill and 170 feet thick at the Islip landfill. The leachate-enriched water occupies the entire thickness of the aquifer beneath both landfills, but hydrologic boundaries retard downward migration of the plumes to deeper aquifers. The Babylon plume is 1,900 feet wide at the landfill and narrows to about 700 feet near its terminus 10,000 feet from the landfill. The Islip plume is 1,400 feet wide at the landfill and narrows to 500 feet near its terminus 5,000 feet from the landfill. Hydrochemical maps and sections show the distribution of the major chemical constituents of the plumes. The most highly leachate-enriched ground water obtained was from the Babylon site; it contained 860 mg/L (milligrams per liter) sodium, 110 mg/L potassium, 565 mg/L calcium, 100 mg/L magnesium, 2,700 mg/L bicarbonate, and 1,300 mg/L chloride. Sulfate was notably absent or in low concentration in most parts of both plumes. Nitrogen in plume water was mostly in the form NH4+, and concentrations as high as 90 mg/L were found; concentrations of nitrogen as N in the plume were less than 10 mg/L. As much as 440 mg/L iron and 190 mg/L manganese were found in the leachate-enriched water. Samples were also tested for arsenic, boron, cadmium, cobalt, chromium, copper, mercury, nickel, lead, selenium, strontium, and zinc. Boron was more or less ubiquitous and was found in concentrations as high as 2 mg/L. Organic carbon was found in concentrations as high as 2,250 mg/L in the most highly leachate-enriched water but attenuated rapidly to less than 20 mg/L. Dissolved-solids concentrations near the landfills were between 400 and 3,000 mg/L at Babylon and between 500 and 1,500 mg/L at Islip. Ground-water temperatures near the landfills exceed those in ambient water by as much as 7°C at Babylon and 16°C at Islip. Heat contributed by the landfills was mostly dissipated within 0.4 mi of the landfill, butat Islip, the warm leachate-enriched water extended 0.5 mi downgradient. The entrance of leachate into the less dense ground water as pulsations after rainfall may explain the presence of high leachate enrichment near the bottom of the aquifer. A comparison of the physical characteristics of leachate-enriched ground water with those of ambient water suggests that the downward movement of leachate results from its greater density. Simulation of the movement and dispersion of the Babylon plume with a mathematical dispersion model indicated the coefficient of longitudinal dispersion to be about 60 ft 2 /d (feet squared per day) and the ground-water velocity to be 1 ft/d. However, the velocity determined from the hydraulic gradient and public-supply wells in the area was 4 ft/d, which would cause a plume four times as long as that predicted by the mathmatical dispersion model. At the Islip site, the plume was one-third the length calculated on the basis of the age of the landfill. The shortness of the plumes has not been explained; it may be a result of the leachate's having been too dilute to form a plume during the early years of the landfills.

New York↗

USGS2024

Elastic stress coupling between supraglacial lakes

Supraglacial lakes have been observed to drain within hours of each other, leading to the hypothesis that stress transmission following one drainage may be sufficient to induce hydro-fracture-driven drainages of other nearby lakes. However, available observations characterizing drainage-induced stress perturbations have been insufficient to evaluate this hypothesis. Here, we use ice-sheet surface-displacement observations from a dense global positioning system array deployed in the Greenland Ice Sheet ablation zone to investigate elastic stress transmission between three neighboring supraglacial lake basins. We find that drainage of a central lake can place neighboring basins in either tensional or compressional stress relative to their hydro-fracture scarp orientations, either promoting or inhibiting hydro-fracture initiation beneath those lakes. For two lakes located within our array that drain close in time, we identify tensional surface stresses caused by ice-sheet uplift due to basal-cavity opening as the physical explanation for these lakes' temporally clustered hydro-fracture-driven drainages and frequent triggering behavior. However, lake-drainage-induced stresses in the up-flowline direction remain low beyond the margins of the drained lakes. This short stress-coupling length scale is consistent with idealized lake-drainage scenarios for a range of lake volumes and ice-sheet thicknesses. Thus, on elastic timescales, our observations and idealized-model results support a stress-transmission hypothesis for inducing hydro-fracture-driven drainage of lakes located within the region of basal cavity opening produced by the initial drainage, but refute this hypothesis for distal lakes.

JGR Earth Surface↗

USGS2000

Regional evaluation of evapotranspiration in the Everglades

Nine sites in the Florida Everglades were selected and instrumented for collection of data necessary for evapotranspiration-determination using the Bowen-ratio energy-budget method. The sites were selected to represent the sawgrass or cattail marshes, wet prairie, and open-water areas that constitute most of the natural Everglades system. At each site, measurements necessary for evapotranspiration (ET) calculation and modeling were automatically made and stored on-site at 15- or 30-minute intervals. Data collected included air temperature and humidity at two heights, wind speed and direction, incoming solar radiation, net solar radiation, water level and temperature, soil moisture content, soil temperature, soil heat flux, and rainfall. Data summarized in this report were collected from January 1996 through December 1997, and the development of site-specific and regional models of ET for this period is described. Latent heat flux is the energy flux density equivalent of the ET rate. Modified Priestley-Taylor models of latent heat flux as a function of selected independent variables were developed at each site. These models were used to fill in periods of missing latent heat flux measurement, and to develop regional models of the entire Everglades region. The regional models may be used to estimate ET in wet prairie, sawgrass or cattail marsh, and open-water portions of the natural Everglades system. The models are not applicable to forested areas or to the brackish areas adjacent to Florida Bay. Two types of regional models were developed. One type of model uses measurements of available energy at a site, together with incoming solar energy and water depth, to estimate hourly ET. This available-energy model requires site data for net radiation, water heat storage, and soil heat flux, as well as data for incoming solar radiation and water depth. The other type of model requires only incoming solar energy, air temperature, and water depth data to provide estimates of hourly ET. The second model thus uses data that are more readily available than the data required for the available-energy model. Computed ET mean annual totals for all nine sites for the 1996-97 period ranged from 42.4 inches per year at a site where the water level is below land surface for several months each year to 57.4 inches per year at an open-water site with no emergent vegetation. Although the density of photosynthetically-active plant leaves has been shown to relate directly to ET in some studies, it does not appear to relate directly to ET in the Everglades, based on comparison of annual ET data with leaf-area index, defined as the Normalized Difference Vegetation Index (NDVI), data from satellite imagery. NDVI and ET appear to be inversely related in the Everglades. The greatest ET rates occurred at open-water sites where the NDVI data indicated the lowest leaf-area index. Among the remaining vegetated sites, there is no clear relation between ET and NDVI, though the highest ET rate corresponded to the lowest NDVI and one of the lowest ET rates corresponded to the highest NDVI value. The variation in ET follows a seasonal pattern, with lowest monthly ET totals occurring in December through February, and highest ET occurring in May through August. The greatest range in monthly ET among all nine sites for the 2-year period occurred at site 3: from 1.81 inches in December 1997 to 6.84 inches in July 1996. A study to compare the Bowen-ratio/energy balance method of ET measurement with the eddy-correlation method was done at one site from June 22, 1998, through September 28, 1998. This comparison indicated that both methods gave comparable values of the Bowen ratio, but there was a considerable difference in available energy measured by the two methods. The mean of all 30-minute measured turbulent heat fluxes from the eddy-correlation apparatus for June 22 through September 29, 1998, was 137.4 watts per square meter, and the mean of the corresponding measured energy was 163.6 watts per square meter, or about 20 percent greater. The disagreement in mean energy fluxes measured by the two methods is problematical and is not fully understood. Although the difference seems to be related to friction velocity, and is practically non-existent at values of friction velocity greater than 0.3 meter per second, the "correctness" of either method cannot be determined with the data available.

Florida↗

USGS2024

Assessment of water levels, nitrate, and arsenic in the Carson Valley Alluvial Aquifer and the development of a data visualization tool for the Carson River Basin, Nevada

Residents of Carson Valley, Douglas County, Nevada, rely on the basin-fill alluvial aquifer underlying the valley for drinking water. Since the 1980s, groundwater levels and water-quality data have been collected to monitor the status of the aquifer system and to assist in planning efforts to address current (2024) and future demand. The U.S. Geological Survey (USGS), in cooperation with Douglas County, Nevada, evaluated trends in water levels, nitrate, and arsenic concentrations from a network of monitoring and domestic wells in Carson Valley. This work also assessed the monitoring well network to determine the suitability of wells for characterizing the occurrence of arsenic in the groundwater. Monitoring of constituents, such as nitrate and arsenic concentrations, is needed to assess changes in contaminant distribution and to evaluate the effect that changing land use and groundwater pumping has on their occurrence and transport. Results of the trend analysis indicate water levels are declining ( p <0.05) in 17 of 26 selected monitoring wells (65 percent). Areas with the largest change in water levels, with more than 20 feet of declines, were within the community areas of Johnson Lane, Ruhenstroth, South Agricultural, East Valley, and Fish Springs. Variations in water levels measured in wells from the Central Agricultural, Minden, Foothill, Alpine County (one well), and Gardnerville Ranchos areas show periods of increase and decrease over time, but they also maintain long-term declining trends ( p <0.05). Increases in nitrate concentrations in groundwater samples collected from 9 out of 14 selected monitoring wells (64 percent) are statistically significant ( p <0.05) within the Ruhenstroth, Gardnerville Ranchos, East Valley, Genoa, and Johnson Lane community areas. Samples collected from a well in Indian Hills/Jacks Valley indicated a decreasing trend in nitrate concentration over time. Nitrate concentrations in samples collected from wells in East Valley, Genoa, Johnson Lane, and Indian Hills/Jack Valley were consistently low (less than 3 milligrams per liter [mg/L]) and stable. Nitrate concentrations from selected wells in Johnson Lane and Garnerville Ranchos exceeded the U.S. Environmental Protection Agency (EPA) maximum contaminant level (MCL) of 10 mg/L (as nitrogen) and have trends that are increasing over time. In 2022, a sample collected from Johnson Lane had a concentration (7.3 mg/L) below the MCL with an increasing trend over time. Temporal trend analyses for groundwater arsenic concentrations in Carson Valley could not be done because of a lack of temporal data. However, using available historical data, arsenic concentrations seem to be greater in groundwater from wells located on the eastern and northern areas of the valley than in wells located on the western or southern areas. Groundwater arsenic concentrations exceed 5 micrograms per liter (μg/L) in most samples collected from wells in Johnson Lane, Airport, Central Agricultural, and East Valley areas and in many cases exceed the U.S. Environmental Protection Agency (EPA) MCL of 10 μg/L. Data indicate that groundwater from domestic wells screened at deeper intervals are likely more vulnerable to elevated arsenic concentrations than shallower wells. A groundwater network evaluation for Carson Valley identified potential modifications in the sampling locations and frequency to better understand the effect of groundwater pumping in communities where municipal and domestic demand are greatest, potentially enhancing understanding of contaminant transport in these areas. Potential modifications to the active well network include reducing the frequency of sample collection from existing network wells (6 out of 11) that have consistently shown low and stable nitrate concentrations, adding wells in areas where data are sparse, and increasing the number of wells in areas with elevated groundwater nitrate concentrations. Including the analysis of arsenic in samples from the active groundwater monitoring well network will provide more detail on the temporal and spatial variability of arsenic concentrations. A visualization tool for the Carson River Basin was developed to provide access to discrete and near real-time hydrologic and water-quality data. The Carson River Basin Hydro Mapper (CBH; U.S. Geological Survey, 2023b) shows active and historical discrete water levels measured by the USGS and the State of Nevada Division of Water Resources, discrete groundwater nitrate and arsenic concentration data collected by the USGS, near real-time streamflow, and surface water levels for select waterbodies. The hydrologic data in the CBH provides resource managers, the public, and the scientific community with an easily accessible tool to present and communicate the most up-to-date information available about local and basin-wide water resources.

Nevada↗

USGS2026

High-resolution transboundary vegetation community maps of the Sonoran and Mojave Desert ecoregion to support critical landscape conservation planning and habitat management needs

We produced a 30-m resolution binational land cover map of Bird Conservation Region 33 (BCR 33) for the U.S. North American Bird Conservation Initiative. The region covers large portions of the Sonoran and Mojave Deserts. The map can support the U.S. Fish and Wildlife Service (FWS) Migratory Bird Program’s recovery planning efforts and constitutes the first known binational land cover dataset spanning sections of the United States–Mexico border and using a consistent classification system for both countries. The mapped region includes 152 distinct land cover classes, covering a total area of 38,421,453 ha (148,345 mi 2 ), of which 13,148,345 ha (52,706 mi 2 ) are located in Mexico and 24,770,640 ha (95,639 mi 2 ) in the United States. We primarily used Landsat 8 (OLI) imagery, supplemented by limited ground surveys from two field campaigns, drone-based aerial data, and existing vegetation classification frameworks from both countries. The classification applied a data-fusion approach integrating 30-m Landsat 8 imagery, decadal phenology metrics from vegetation indices, and a random forest model trained mainly with datasets from a comprehensive national mapping project from the U.S. Geological Survey (USGS) GAP Analysis Project (GAP) and federal wildland fire agencies’ Landscape Fire and Resource Management Planning Tools (LANDFIRE) (GAP/LANDFIRE) [United States side] and the National Institute of Statistics and Geography (INEGI) [Mexico side] as well as land cover maps and opportunistic open-access and field observations. Mapping of the full BCR 33 region was carried out in two phases: 1) Phase I, the prototype map, covered a smaller portion of the transboundary area and identified 31 land cover classes, and 2) Phase II, the full BCR 33 map (refer to Figure 1), which resulted in 152 land cover classes. Using a Random Forest classifier, we achieved an overall prediction accuracy of 92% for the Phase I map and 87% for the Phase II full region map. This slight decrease can be attributed to working on a larger, more complex area with a greater number of land cover classes. No formal validation was conducted, aside from using a subset of the collected field observations and training data to assess model performance during and after training. The training sites were further verified using Google Earth (Google, 2026) imagery. Two undergraduate students who worked for over a year visually inspected imagery and open access public images to confirm each training site during model training using in-house developed, online, visual tools. A portion of this field training data was reserved for model validation, and the corresponding results are to be presented in later sections. The project developed an end-to-end, medium- and fine-resolution remote sensing–based data fusion mapping approach. This effort produced a map (Nagler et al., 2025) and the online tools to support a dynamic, live, online map for visualizing the transboundary vegetation communities in BCR 33. The toolset is currently hosted by the University of Arizona (UofA) Vegetation Index and Phenology (VIP) Lab to support FWS partners (https://vip.arizona.edu/viplab_data_explorer?LCM_BCR33). The online map is designed to allow rapid updates using new training, validation, or correction data, making it dynamic and maintainable. The approach we took established a framework for rapid updating and correction of land cover maps, as the model can be quickly retrained with new field observations, updated training data, or other sources. This enables dynamic mapping and change detection of the region’s vegetation. This framework is an advance in data fusion and crowdsourced mapping of complex, vulnerable regions, providing support to regional stakeholders and the wider user community. This transboundary map can inform the protection, conservation, and restoration of vegetation, habitat, and ecosystems, particularly for threatened and endangered species across the two nations using consistent and harmonized binational mapping systems. Beyond supporting land management decisions and stakeholders in the transboundary desert ecoregions, this BCR 33 mapping effort establishes a foundation for future rapid, low-cost, cross-border land cover mapping that can benefit and advance ecosystem management.

Arizona, Baja California, California, Nevada, Sina↗

USGS2025

Unlocking ecological insights from sub-seasonal visible-to-shortwave infrared imaging spectroscopy: The SHIFT campaign

We stand at the threshold of a transformative era in Earth observation, marked by space-borne visible-to-shortwave infrared (VSWIR) imaging spectrometers that promise consistent global observations of ecosystem function, phenology, and inter- and intra-annual change. However, the full value of repeat spectroscopy, the information embedded within different temporal scales, and the reliability of existing algorithms across diverse ecosystem types and vegetation phenophases have remained elusive due to the absence of suitable sub-seasonal spectroscopy data. In response, the Surface Biology and Geology (SBG) High-Frequency Time Series (SHIFT) campaign was initiated during late February 2022 in Santa Barbara County, California. SHIFT, designed to support NASA's SBG mission, addressed mission scoping, scientific advancement, applications development, and community building. This ambitious endeavor included weekly Airborne Visible InfraRed Imaging Spectrometer-Next Generation (AVIRIS-NG) imagery acquisitions for 13 weeks (spanning February 24 to May 29, 2022), accompanied by coordinated terrestrial vegetation and coastal aquatic data collection. We describe the rich datasets collected and illustrate how the complex sub-seasonal patterns of change can be linked to biological science and applications, surpassing insights from multispectral observations. Leveraging open-source processing methods and cloud-based analysis tools, the SHIFT campaign showcases the readiness of the scientific community to harness ecological insights from remotely sensed hyperspectral time series. We provide an overview of SHIFT's goals, data collections, preliminary results, and the collaborative efforts of early career scientists committed to unlocking the transformative potential of high-frequency time series data from space-borne VSWIR imaging spectrometers.

Ecosphere↗

USGS2025

An inset groundwater-flow model to evaluate the effects of layering configuration on model calibration and assess managed aquifer recharge near Shellmound, Mississippi

The U.S. Geological Survey has developed a high-resolution inset groundwater-flow model in the Mississippi Delta as part of an interdisciplinary collaboration coordinated by the Mississippi Alluvial Plain project to provide a tool that stakeholders can use to support water-resource management decisions. Groundwater withdrawals from the Mississippi River Valley alluvial (MRVA) aquifer have been vital to support agricultural production in the region, but substantial groundwater-level declines near Shellmound, Mississippi, have caused concerns for long-term sustainability of the aquifer. To better understand the subsurface and try to mitigate the long-term groundwater-level declines, stakeholders have undertaken actions including a Groundwater Transfer and Injection Pilot (GTIP) project using a riverbank filtration-based managed aquifer recharge approach. The pilot project consisted of extracting groundwater near the Tallahatchie River and reinjecting it into the aquifer 3 kilometers west where water levels have substantially declined. A high-resolution airborne electromagnetic (AEM) survey was also completed to collect electrical resistivity data to support the GTIP project and the development of the groundwater model. The inset groundwater-flow model was developed to (1) integrate the AEM data into the optimal layering configuration of the MRVA aquifer that the available observation data can support through calibration, and (2) assess the potential effect of the GTIP project on the groundwater levels. The AEM data were processed into three different layering configurations leading to the development of model A (18 layers), model B (16 layers), and model C (8 layers), all at a 100- x 100-meter cell spatial resolution using the U.S. Geological Survey modular finite-difference flow model 6 code with Newton-Raphson formulation. The model development process integrated recent advances in modeling, such as the incorporation of AEM data, the use of outputs from the soil-water-balance (SWB) model, and the Aquaculture and Irrigation Water-Use Model, and was facilitated by robust automation using the open-source python packages Modflow-setup and SFRmaker. Using Parameter Estimation ++ Iterative Ensemble Smoother, the three numerical groundwater-flow models (models A, B, and C) were calibrated against a set of observations, which included aquifer groundwater levels, streamflows, stream stage, and aquifer transmissivity. Results indicate that the detailed representation of MRVA aquifer layers in model A produced the best calibrated model by history matching, and the integration of data representing surficial connectivity played a key role in improving groundwater recharge and enhancing the ability of the model to match groundwater levels in the cone of depression. A forecast model simulated the managed aquifer recharge approach, and the results indicated that, given average irrigation and recharge conditions (2010–15), the GTIP project has the potential to induce groundwater-level increases of as much as 3 meters around the injection site, but a sustained increase would require repetition in subsequent years of water transfer at 2022 rates or above.

Mississippi↗

USGS1993

Hydraulic properties of the Madison aquifer system in the western Rapid City area, South Dakota

Available information on hydrogeology, data from borehole geophysical logs, and aquifer tests were used to determine the hydraulic properties of the Madison aquifer. From aquifer-test analysis, transmissivity and storage coefficient were determined for the Minnelusa and Madison aquifers, and vertical hydraulic conductivity (K v ') along with specific storage (Ss') for the Minnelusa confining bed. Borehole geophysical well logs were used to determine the thickness and location of the Minnelusa aquifer, the lower Minnelusa confining bed, and the Madison aquifer within the Madison Limestone. Porosity values determined from quantitative analysis of borehole geophysical well logs were used in analyzing the aquifer-test data. The average porosity at the two aquifer-test sites is about 10 percent in the Minnelusa aquifer, 5 percent in the lower Minnelusa confining bed, and 35 percent in the Madison aquifer. The first aquifer test, which was conducted at Rapid City production well #6, produced measured drawdown in the Minnelusa and Madison aquifers. Neuman and Witherspoon's method of determining the hydraulic properties of leaky two-aquifer systems was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. Analysis of the aquifer test for the Minnelusa aquifer yielded a transmissivity value of 12,000 feet squared per day and a storage coefficient of 3 x 10 -3 . The specific storage of the Minnelusa confining bed was 2 x 10 -7 per foot, and its vertical hydraulic conductivity was 0.3 foot per day. The transmissivity of the Madison aquifer at this site was 17,000 feet squared per day, and the storage coefficient was 2 x 10 -3 . The second aquifer test, which was conducted at Rapid City production well #5 (RC-5) produced measured drawdown only in the Madison aquifer. Hantush and Jacob's method of determining the hydraulic properties of leaky confined aquifers with no storage in the confining bed was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. The analysis of data from the RC-5 aquifer test showed that transmissivity was not equal in all directions. Hantush's method was used to determine the direction of radial anisotropy and magnitude of the major and minor axes of transmissivity. The major axis of transmissivity is at an angle of 42° east of north, and the transmissivity along this axis is about 56,000 feet squared per day. The minor axis of transmissivity is at an angle of 48° west of north, and the transmissivity along this axis is about 1,300 feet squared per day. The major axis of transmissivity intersects Cleghorn Springs, a large resurgent spring on the west edge of Rapid City. The shape of the potentiometric contours of the Madison aquifer near RC-5 agree with the orientation of the transmissivity ellipse. The average value of the storage coefficient from the isotropic analysis of the aquifer-test data was 3.5 x 10 -4 , and the average vertical hydraulic conductivity of the lower Minnelusa confining bed was 9.6 x 10 -3 foot per day.

South Dakota↗

USGS2026

CRESCENT earthquake dynamic rupture, earthquake cycle, and tsunami code verification platform

Physics-based simulations are critical for understanding natural hazards. The increasing complexity of numerical codes requires benchmark exercises to verify that different computational methods yield consistent results when solving the same governing equations. Here, we present an open-access web platform designed for the verification of earthquake dynamic rupture, seismic cycle, and tsunami simulations. The platform architecture utilizes a modular, serverless backend on Amazon Web Services (AWS) to provide scalable file processing and visualization. A lightweight static web application provides a secure interface for uploading and managing results, while the browser-based data visualization enables interactive analysis of time series and surface grid data. By using structured JavaScript Object Notation (JSON) text files to define benchmark structures, the system remains fully extensible, allowing the addition of new scenarios without modifying the underlying software logic. The platform hosts the "The Tsunami Problem Versions" (TTPV) 1 & 2, two benchmarks for 3D fully coupled earthquake dynamic rupture and tsunami generation, and provides a framework for earthquake cycle models. This community resource aims to build trust in numerical simulations and facilitate long-term collaborative code verification as modeling software continues to evolve.

Seismica↗

USGS2025

Bedrock geologic map of the Bellows Falls 7.5- x 15-minute quadrangle, Windham and Windsor Counties, Vermont, and Sullivan and Cheshire Counties, New Hampshire

Introduction The bedrock geology of the Bellows Falls 7.5- x 15-minute quadrangle, Vermont and New Hampshire, consists of polydeformed Ordovician to Devonian metasedimentary, metavolcanic, and metaplutonic rocks of the Connecticut Valley trough, Bronson Hill anticlinorium (or Bronson Hill terrane), and the Central Maine terrane. Previous work in this area includes a 1:62,500-scale published map and text (1946), State geologic maps of New Hampshire (1997) and Vermont (2011), and various maps and reports presented largely as parts of field trip guidebooks. A provisional open-file map of the geology of the Vermont part of the Bellows Falls 7.5- x 15-minute quadrangle, completed in 1997, is incorporated and revised on this map based on additional fieldwork. This study recognizes three major structural levels from west to east and from lowest to highest: (1) autochthonous rocks of the Connecticut Valley trough; (2) allochthonous rocks of the New Hampshire sequence and Bronson Hill arc in the Monroe thrust sheet (or nappe), including the Skitchewaug nappe; and (3) allochthonous rocks of the Fall Mountain thrust sheet or nappe.

New Hampshire, Vermont↗

USGS2026

Structural evolution of iron coordination in proteins across Earth’s oxygenation history

Protein metal-binding sites support essential biological functions shaped by protein fold, subunit interactions, and cofactor chemistry. Because these sites encode both biochemical function and environmental constraint, they offer a route to connect protein evolution with changes in Earth’s surface environment through time. Of particular interest is iron (Fe), the most widely used metal in biology and a cofactor central to both anaerobic and aerobic metabolism. Here, we systematically compare the immediate chemical environments of functionally essential Fe-binding sites in three-dimensional protein structures to test whether Fe coordination spheres differ across oxygen contexts. Using a curated dataset of experimentally determined structures, we identify a clear shift in the local chemistry of Fe-binding environments from anaerobic to aerobic proteins. Aerobic Fe sites are significantly more hydrophilic than anaerobic ones, and amino-acid composition analyses show reduced cysteine use in aerobic Fe-binding neighborhoods. These patterns suggest that as Earth’s surface environments became more oxygenated, proteins retained Fe as a core redox metal while reconfiguring local coordination chemistry in ways less vulnerable to oxidative damage. More broadly, this study introduces and applies the Coordination Sphere Analysis and Comparison (CSAC) workflow, an open and archived Python workflow for extracting local metal-binding environments from structure datasets, providing a framework for linking metalloprotein structure to evolutionary and geobiological transitions across Earth history.

Discover Life↗

USGS2026

In-situ geochronology using LA-ICP-MS/MS: Application of the Lu-Hf system in carbonate, apatite and fluorite

Geochronology is a fundamental tool for reconstructing earth history and constraining the timing of ore deposit formation. Traditionally, U-rich minerals like zircon, titanite, monazite and apatite have been analysed to determine the timing of mineralization and alteration events. However, not all deposits or alteration assemblages contain these minerals, and the U-Pb system can be disturbed due to open system behaviour. We present a methodology for obtaining in-situ Lu-Hf dates from various minerals to demonstrate the potential for dating ore deposits that lack U-rich minerals. Carbonate, apatite and fluorite minerals from different tectonic settings and geological environments were analysed. We acquired Lu-Hf and REE (rare earth element) data from carbonate minerals from a carbonatite orebody and dike samples from the Mountain Pass REE carbonatite deposit in California, USA. We also tested a ‘double-dating’ method, where U-Th-Pb dates and Lu-Hf dates were obtained from the same analysis of apatite from rocks in the Michigan’s Great Lakes Tectonic Zone. Preliminary results for Lu-Hf dating of fluorite from carbonatite rocks in the Lemitar Mountains of New Mexico are also included. The analytical methodology shows promising results in each of these cases where there is sufficient parent Lu and U and measurable daughter Hf and Pb respectively.

Conference Paper↗

USGS2026

Microtextural characteristics of adularia in banded quartz veins from the Midas low-sulfidation epithermal deposit, Nevada

High-grade ores at the Miocene Midas low-sulfidation epithermal deposit in northern Nevada are confined to crustiform quartz veins containing abundant adularia. Micro-X-ray fluorescence elemental mapping reveals that adularia is a common gangue mineral occurring in colloform bands, bands showing bladed textures, and bands with dendritic terminations. The adularia aggregates have delicate shapes and are comprised of stacked, submillimeter crystals hosted by fine-grained quartz. The textural evidence suggests that the adularia aggregates originally formed within a gel-like, noncrystalline silica matrix, which subsequently transformed into quartz. This indicates that the adularia did not precipitate in open space along the vein walls. Correlative microscopy, involving scanning electron microscopy-based automated mineralogy and optical petrography, demonstrates that bands containing abundant adularia are not the primary host to ore minerals. The ore minerals occur in different bands within the crustiform veins, implying that adularia and ore mineral precipitation did not always occur simultaneously. It is hypothesized here that fluid flow at Midas involved intermittent short-lived events of fluid flashing, causing rapid solute supersaturation in the liquid. During each flashing event, different amounts of vapor were produced along a given vein. Compositional differences between adjacent bands in the crustiform quartz veins may, therefore, be linked to variations in the amount of vapor formed during each flash event.

Nevada↗