SEARCH · Geology Reports

Results for “Geochemistry: Exploration, Environment, Analysis”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

633 records · Page 19Linked to original sources

USGS2026

Groundwater tracing used to delineate recharge areas and map karst groundwater pathways for subterranean streams at Oregon Caves National Monument and Preserve

Oregon Caves National Monument and Preserve in southwestern Oregon is a 4,554-acre area managed by the National Park Service that is home to several cave systems, including Oregon Caves, which is the longest cave in Oregon, with 3.03 miles of mapped passages. Because of the interconnected nature of karst hydrologic systems, it is critical to understand the areas that can influence water quality and quantity in karst environments. Toward this goal, dye tracing was conducted by the U.S. Geological Survey from 2021 to 2024 to better understand the pathways that karst groundwater follows at Oregon Caves National Monument and Preserve and to delineate recharge areas for two caves, Oregon Caves and Cave Next Door. During the project, eight dye injections were conducted, delineating a 0.51-square-mile recharge area for Oregon Caves and a 0.69-square-mile recharge area for Cave Next Door. Additionally, the study helped to identify three resurgences associated with Oregon Caves that were previously unknown and showed that the recharge areas for the two caves were distinct from one another. The dye traces also illuminated some unique recharge characteristics of the karst at Oregon Caves, including a high variance in karst groundwater velocities, retention within the karst aquifers, and a significant diffuse-flow component.

Oregon↗

USGS2025

Applying U-Th disequilbrium for dating siliceous sinters

Continental hydrothermal systems are critical avenues for the crustal transport of heat and mass captured for geothermal energy and mineral exploration. Thus, understanding their temporal evolution and longevity is important for resource characterization. Deposits of microlaminated siliceous sinter, common surface expressions of high temperature reservoirs (> 170 °C), have the potential to trace hydrothermal histories. Geothermal reservoirs are often located within uranium-bearing silicic volcanic rock where subsurface fluid-rock interactions extract U into hydrothermal fluids. U incorporated in the surface sinter deposit has the potential to provide a U— Th disequilibrium dating option. We focus on samples from El Tatio geyser field in the Altiplano of northern Chile, the largest geothermal system in the Andes. Our resulting 230 Th/U ages, along with the water and deposit elemental compositions, suggest concentrations of U and Th vary predictably along the sinter apron. While distal facies containing the highest U concentrations (> 50 μg/g) are least affected by detrital Th corrections, they can display suspected open-system behavior. In contrast, more medial facies, where bacterial mats and other porous textures are co mmonly concentrated, have only trace amounts of U (< 0.1 μg/g), which leads to unreliable or geologically improbable dates. Proximal facies tend to date most consistently. By comparing existing 14 C ages with 230 Th/U results, 230 Th/U ages tend to be younger than the 14 C ages, supporting the presence of a 14 C-dead carbon influence. New data confirm that the onset of geothermal activity at El Tatio goes back to the late Pleistocene.

Altiplano, El Tatio geyser field↗

USGS2026

Morphodynamics of snow barchans at Concordia Station, Antarctica

Barchans are crescent-shaped dunes that form and migrate under unimodal wind regimes in areas of low sediment availability. While sand barchan morphodynamics has been extensively studied, snow barchans remain poorly documented. Here, using hourly time-series images taken near Concordia Station, Antarctica, we measure the sizes (lengths 0.3 m to 13 m, widths 0.4 m to 7.5 m) and migration rates (0.13 m h −1 to 3.5 m h −1 ) of 44 populations of snow barchans during 2017–2022. We compare this dataset with established height–velocity and length-width relationships for sand barchans in both air and water. Our results show that snow barchans follow the same scaling as sand barchans, allowing us to estimate a characteristic sintering (bonding of snow particles) time of about one day. This sintering process limits the size of snow barchans when active, reduces their aspect ratios, and, once wind falls below the transport threshold, explains their preservation over a few years. During wind events, migrating barchans are too small to maintain their shape and orientation, making them highly responsive to fluctuations in wind direction. Thus, studying snow barchans improves understanding of an elementary bedform encountered in multiple environments and also of the surface properties of snow on different timescales, offering insights into snow accumulation and wind-blown snow in ice cores.

Geomorphica↗

USGS2025

Using peak geometry and shifts in the x-ray spectrum of carbon from electron probe microanalysis to determine thermal maturity of organic matter

During the burial of mudstones, the associated organic matter undergoes gradual thermal maturation, a key process that can influence the reactivity of organic matter during catagenesis, the formation of hydrocarbon deposits and the chemical weathering of mudstones. Conventional methods for assessing the thermal maturity of organic matter often fail to reflect the geochemical heterogeneity between individual organic phases in mudstone samples. Here, we report an alternative, non-destructive, surficial and micro-scale (analytical spot size of ~ 300 nm with about 4 μm diffusion depth for micrometre-size organic grains) method to evaluate the thermal maturity of organic matter in mudstones using the carbon K α X-ray spectrum measured by field emission-electron probe microanalyser (FE-EPMA). Using this method, we observed correlations between parameter values derived from FE-EPMA spectra, including the peak position, the peak area and the intra-sample heterogeneity of these measurements, and independently measured vitrinite/solid bitumen reflectance for a suite of mudstones, representing different age, geological context and burial depth. With the increased values in peak area and position, we identified an increase in the carbon mass fraction of organic matter and the mean nominal oxidation state of carbon approaching zero. These trends, which are consistent with aromatisation and graphitisation, provide the rationale for using FE-EPMA to estimate the thermal maturity of organic matter. To explore some of these trends in more detail, we employed time-of-flight secondary ionisation mass spectrometry, X-ray photoelectron spectroscopy and optical reflectance measurements on a subset of samples.

Geostandards and Geoanalytical Research↗

USGS2025

Understanding market sensitivity: Estimation of supply and demand elasticities for non-fuel minerals

In today’s rapidly changing economic landscape, understanding market responsiveness to price changes and the factors influencing commodity prices has become increasingly relevant. Price elasticities serve as indicators of how variations in market conditions affect supply and demand, providing insights into the sensitivity of commodity markets to price fluctuations. This paper presents a comprehensive analysis of price elasticities of supply and demand for 74 non-fuel mineral commodities including precious metals, base metals, minor metals, and industrial minerals that are utilized across various industries. We employ various econometric techniques, including fixed effects models for panel data and two-stage dynamic ordinary least squares (2S-DOLS) alongside autoregressive distributed lag (ARDL) models for time series analysis, to derive robust estimates of price elasticities. Our findings reveal variability in elasticities among different commodities and indicate that all studied mineral commodities exhibit price inelastic supply and demand in the short run, which we define as one year for the purposes of our analysis, given that the data is all annual. This research provides original estimates of price responsiveness for a wide range of commodities that have not been previously addressed in the literature, thereby enhancing the understanding of market dynamics in the mineral sector. Given that price elasticities can be influenced by factors such as market structure, technological advancements, mining costs, and industry-specific demand drivers, we use variables that serve as proxies for these factors.

Mineral Economics↗

USGS2025

Lessons in business recovery following the 2023 Kahramanmaraş earthquake sequence, Türkiye informed by women entrepreneurs

On 6 February 2023, Southern Türkiye was hit by devastating earthquakes, directly affecting over 14 million people in 11 cities, causing more than 50,000 deaths and the destruction of more than 800,000 buildings. This article goes beyond the physical damage imposed by the catastrophe to discuss the effects of the earthquakes on the operations of women-owned businesses. The mixed-method study with entrepreneurs belonging to a women’s business association operating in a moderately disrupted part of the region explores their struggles and recovery expectations. Thirty-five questionnaires were analyzed to identify the reasons for business closure, challenges, and needs faced in the post-disaster period and their recovery strategies. In addition, 23 entrepreneurs participated in roundtable discussions to provide a broader context to their responses to survey topics as well as lessons learned. Across both the survey and roundtables, while many respondents reported minor physical damage to their building, they also experienced financial and personal challenges from disruption to equipment, infrastructure, services, supply chains, institutional decisions, employee well-being, and customer base. Many used their business resources and personal savings to assist employees and others in the community. The women entrepreneurs often felt their recovery needs were ignored by government and private relief organizations and encountered barriers to receiving assistance from public and private institutions. Organizing together as women in business, even informally, provided mutual support during the crisis and recovery periods and catalyzed their role in support of their communities. The results illuminate functional community recovery as a balance of recovery of built infrastructure functionality and recovery of the broader social and economic fabric of the community.

southern Turkey↗

USGS1998

Transmissivity and water quality of water-producing zones in the intermediate aquifer system, Sarasota County, Florida

The intermediate aquifer system is an important water source in Sarasota County, Florida, because the quality of water in it is usually better than that in the underlying Upper Floridan aquifer. The intermediate aquifer system consists of a group of up to three water-producing zones separated by less-permeable units that restrict the vertical movement of ground water between zones. The diverse lithology, that makes up the intermediate aquifer system, reflects the variety of depositional environments that occurred during the late Oligocene and Miocene epochs. Slight changes in the depositional environment resulted in aquifer heterogeneity, creating both localized connection between water-producing zones and abrupt culmination of water-producing zones that are not well documented. Aquifer heterogeneity results in vertical and areal variability in hydraulic and water-quality properties. The uppermost water-producing zone is designated producing zone 1 but is not extensively used because of its limited production capability and limited areal extent. The second water-producing zone is designated producing zone 2, and most of the domestic- and irrigation-supply wells in the area are open to this zone. Additionally, producing zone 2 is utilized for public supply in southern coastal areas of Sarasota County. Producing zone 3 is the lowermost and most productive water-producing zone in the intermediate aquifer system. Public-supply well fields serving the cities of Sarasota and Venice, as well as the Plantation and Mabry Carlton Reserve well fields, utilize producing zone 3. Heads within the intermediate aquifer system generally increase with aquifer depth. However, localized head-gradient reversals occur in the study area, coinciding with sites of intense ground-water withdrawals. Heads in producing zones 1, 2, and 3 range from 1 to 23, 0.2 to 34, and 7 to 42 feet above sea level, respectively. Generally, an upward head gradient exists between producing zones 3 and 2. However, an upward head gradient between producing zones 2 and 1 does not consistently occur throughout Sarasota County, probably the result of greater ground-water withdrawals from producing zone 2 than from producing zone 1. The transmissivity of the intermediate aquifer system is spatially variable. Specific-capacity data from selected wells penetrating producing zones 2 and 3, were used to estimate transmissivity. Estimated transmissivity values for producing zones 2 and 3 range from about 100 to 26,000 feet squared per day and from about 1,300 to 6,200 feet squared per day, respectively. Because the capacity of specific water-producing zones is highly variable from site to site, estimating the performance of a specific water-producing zone as a water resource is difficult. Water samples collected during the study were analyzed for major-ion concentrations. Generally, bicarbonate type water from rock interaction occurs in northern Sarasota County; enriched calcium-magnesium-sulfate type water from deeper aquifers occurs in central Sarasota County; and sodium-chloride type water from saltwater mixing occurs in southern Sarasota County. In some areas of northern Sarasota County, the major-ion concentrations in water are lower in producing zone 2 than in producing zone 1. Major-ion concentrations in water are higher in producing zone 3 throughout the study area. A major objective of the study was to evaluate hydraulic and water-quality data to determine distinctions that could be used to characterize a particular producing zone. However, data indicate that both hydraulic and water-quality properties are highly variable within and between zones, and are more related to the degree of connection between and areal extent of water-producing zones than to aquifer depth and distance from the coast.

Florida↗

USGS2026

Making many out of one: Synthetic geologic deformation model distributions for use in USGS NSHM25‐PRVI Puerto Rico-U.S. Virgin Island update

A key use‐case of geologic slip rates is within deformation models used in probabilistic seismic hazard analyses. Field‐derived geologic slip rates have formed the cornerstone of deformation models in such applications for decades. Recent advancements in seismic hazard analyses have expanded the use of faults for which geologic slip rates are not well constrained using categorical slip rate estimates. Because of these advancements, application of a geologic deformation model for use in 2025 U.S. Geological Survey National Seismic Hazard Model Puerto Rico‐U.S. Virgin Islands (NSHM25‐PRVI) proved challenging due to: (1) a lack of field‐based geologic slip rates, and (2) a lack of epistemic uncertainty distributions within a broad range of estimated slip rates. Preliminary versions of the NSHM25‐PRVI model sampled these slip rate bins in a coincident manner along preferred and extreme value branches, which yielded untenable correlations in mean hazard results. To minimize the influence of correlated uncertainties amid these challenges, we develop a synthetic epistemic uncertainty distribution for deformation rate on each crustal fault. Each fault has a weighting schema across four possible distribution shapes: uniform, normal, triangular favoring local minima, and triangular favoring local maxima. The synthetic distributions are then sampled several times for each logic tree branch. The results provide a more realistic distribution of rates across the study region as compared with using correlated extrema sampling. This exploration of our method in a small region like PRVI can pave the way for larger‐scale, more complicated applications (e.g., western United States).

Puerto Rico, US Virgin Islands↗

USGS2024

Long-term communication of aftershock forecasts: The Canterbury earthquake sequence in New Zealand

On 14 February 2016, a magnitude (M)5.7 earthquake struck in Christchurch New Zealand (Aotearoa in the Maori language). The shaking caused damage to historic facades, power outages, cliff collapses, rock falls, and liquefaction but no reported injuries or fatalities. This Valentine’s Day earthquake was an aftershock in the Canterbury earthquake sequence (CES), which began on 4 September 2010 with the M7.1 Darfield Earthquake and included the destructive and fatal M6.2 Christchurch aftershock on 22 February 2011. This study, eight months after the Valentine’s Day earthquake and six years after the initiation of the CES, is the first to explore long-term aftershock forecast information and communication needs. The exploratory study also aimed to gather feedback on aftershock scenarios, an alternative form for communicating the forecast. The qualitative study involved workshops with emergency managers, public health officials, and members of the public in Christchurch. Key findings for long-term communication throughout an earthquake sequence include: 1. divergent earthquake experiences affect aftershock communication response and information needs; 2. understanding aftershock sequence behavior is foundational to sense-making when large aftershocks occur; 3. strategic earthquake sequence updates from the trusted science agency and local agencies could serve as important reminders for earthquake preparedness; 4. communication of aftershock forecast uncertainty could aid with both the credibility of the information and living with uncertainty, and 5. inclusion of impact information and preparedness advice into aftershock forecast scenarios could provide links to actionable information. The paper derives implications for research and practice of long-term communications during an aftershock sequence.

Christchurch↗

USGS1993

Hydraulic properties of the Madison aquifer system in the western Rapid City area, South Dakota

Available information on hydrogeology, data from borehole geophysical logs, and aquifer tests were used to determine the hydraulic properties of the Madison aquifer. From aquifer-test analysis, transmissivity and storage coefficient were determined for the Minnelusa and Madison aquifers, and vertical hydraulic conductivity (K v ') along with specific storage (Ss') for the Minnelusa confining bed. Borehole geophysical well logs were used to determine the thickness and location of the Minnelusa aquifer, the lower Minnelusa confining bed, and the Madison aquifer within the Madison Limestone. Porosity values determined from quantitative analysis of borehole geophysical well logs were used in analyzing the aquifer-test data. The average porosity at the two aquifer-test sites is about 10 percent in the Minnelusa aquifer, 5 percent in the lower Minnelusa confining bed, and 35 percent in the Madison aquifer. The first aquifer test, which was conducted at Rapid City production well #6, produced measured drawdown in the Minnelusa and Madison aquifers. Neuman and Witherspoon's method of determining the hydraulic properties of leaky two-aquifer systems was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. Analysis of the aquifer test for the Minnelusa aquifer yielded a transmissivity value of 12,000 feet squared per day and a storage coefficient of 3 x 10 -3 . The specific storage of the Minnelusa confining bed was 2 x 10 -7 per foot, and its vertical hydraulic conductivity was 0.3 foot per day. The transmissivity of the Madison aquifer at this site was 17,000 feet squared per day, and the storage coefficient was 2 x 10 -3 . The second aquifer test, which was conducted at Rapid City production well #5 (RC-5) produced measured drawdown only in the Madison aquifer. Hantush and Jacob's method of determining the hydraulic properties of leaky confined aquifers with no storage in the confining bed was used to evaluate the aquifer-test data by assuming the fracture and solution-opening network is equivalent to a porous media. The analysis of data from the RC-5 aquifer test showed that transmissivity was not equal in all directions. Hantush's method was used to determine the direction of radial anisotropy and magnitude of the major and minor axes of transmissivity. The major axis of transmissivity is at an angle of 42° east of north, and the transmissivity along this axis is about 56,000 feet squared per day. The minor axis of transmissivity is at an angle of 48° west of north, and the transmissivity along this axis is about 1,300 feet squared per day. The major axis of transmissivity intersects Cleghorn Springs, a large resurgent spring on the west edge of Rapid City. The shape of the potentiometric contours of the Madison aquifer near RC-5 agree with the orientation of the transmissivity ellipse. The average value of the storage coefficient from the isotropic analysis of the aquifer-test data was 3.5 x 10 -4 , and the average vertical hydraulic conductivity of the lower Minnelusa confining bed was 9.6 x 10 -3 foot per day.

South Dakota↗

USGS2024

A decade of shaking in the Garden City: The dynamics of preparedness, perceptions, and beliefs in Canterbury, New Zealand, and implications for earthquake information

This study explored earthquake preparedness over time - before, during, and 10 years after the Canterbury Earthquake Sequence (CES) in Aotearoa New Zealand (NZ). Surveys of Canterbury residents were conducted in 2009, 2013 and again in 2021, using variables derived from Community Engagement Theory (CET). The surveys measured earthquake perceptions and beliefs, participation and engagement, and preparedness actions. Results were compared across the three samples. Findings indicate that perceptions and beliefs (e.g. risk perception, outcome expectancy beliefs), and types of preparedness actions taken (e.g. collection of survival items, structural preparedness, community and agency relationships), differed over time, depending on people’s experiences before, during, and after the CES. For example, during and after the CES people were more likely to believe that preparing provided a benefit to daily life, but less likely to think it could reduce property damage, perhaps due to people’s experiences of disruption and damage during the earthquakes. An understanding of such dynamics can assist with the provision and timing of risk and preparedness information. This study highlights the importance of providing applicable and actionable preparedness information, that is relevant to people’s experiences, throughout an earthquake sequence. Such information might evolve and change in focus over time depending on risks and needs. Focus could also be given to information that builds peoples beliefs and capacities to undertake preparedness in evolving situations. Understanding preparedness in the context of different experiences and timeframes is useful in helping update models such as the CET, where the dynamics of time might be better incorporated.

Canterbury↗

USGS2025

Insights into widespread landsliding in southern Appalachia from Hurricane Helene

Between 23 and 27 September 2024, antecedent rain followed by Hurricane Helene produced one of the most damaging weather events in southern Appalachia history. The back-to-back storm events resulted in a maximum cumulative rainfall of 848 mm and hurricane-force wind gusts over 170 km/h in western North Carolina, eastern Tennessee, and southwestern Virginia. The resulting regional flooding, landslides, and tree blowdown caused over 100 fatalities, damaged or destroyed critical infrastructure and thousands of structures, and severed connectivity across the region. Over the next several weeks, a multi-agency landslide response produced a rapid hazard assessment and mapped 2217 landslides, 55% of which damaged infrastructure or property. Orographic uplift enhanced rainfall, resulting in concentrated landsliding along the ~250 km swath of the Blue Ridge escarpment in western North Carolina. Landslides initiated predominantly on windward-facing (southeast-facing) slopes, and localized clustering of initiation points indicated a strong influence of hillslope-scale meteorological and geomorphic factors. Many shallow landslides mobilized into larger, highly mobile, and damaging debris flows that graded into floods. Here, we put our preliminary observations in the context of historical storm-driven landslide events and open new avenues for investigating the nature and extent of landslides and their effects in southern Appalachia and similar environments.

Georgia, North Carolina, South Carolina, Tennessee↗

USGS2024

Current status of the community sensor model standard for the generation of planetary digital terrain models

The creation of accurate elevation models (topography) from stereo images are critical for a large variety of geospatial activities, including the production of digital orthomosaics, change detection, landing site analysis, geologic mapping, rover traverse planning, and spectral analysis. The United Stated Geological Survey, Astrogeology Science Center, continues to transition the supported planetary sensor models to the Community Sensor Model (CSM) standard. This paper describes the current state of use for this photogrammetric standard, supported sensor model types, and qualitatively compares derived topography between SOCET SET and SOCET GXP ( ® BAE Systems) using HiRISE stereo images of Mars. Our transition to the CSM standard will ensure an uninterrupted capability to make these valuable products for Mars and many other extraterrestrial planets and moons.

Remote Sensing↗

USGS2025

High frequency and region-scale simulations of large (Mw7+) earthquakes on the southern Whidbey Island fault, Washington, USA

We simulate ground shaking in western Washington State from hypothetical M w 7.0–7.5 earthquakes on the southern Whidbey Island fault (SWIF). Ground motions are modeled considering kinematic source distributions on a complex fault plane, a 3D seismic velocity model, and region‐specific soil velocity models. We run simulations with varying model resolutions, including regional‐scale simulations with a maximum‐modeled frequency of ∼1 Hz and local‐scale simulations with a maximum‐modeled frequency of ∼2.5 Hz. Additional local‐scale simulations are run considering high‐resolution surface topography. We explore how source parameters (i.e., magnitude, hypocenter location, and dip direction) and 3D velocity structure impact peak shaking intensity and its variability. In particular, we find that earthquakes on the SWIF would likely produce strong shaking throughout the populated Puget Lowland, including in the cities of Everett, Seattle, Bellevue, and Tacoma, Washington. Simulated short‐period ( T ≤ 2 s) spectral accelerations are strong throughout the Puget Lowland, and long‐period shaking ( T ≥ 5 s) is strong in the deep regional sedimentary basins, especially the Everett and Seattle basins. Source parameters strongly influence intra‐ and interevent variability in response, primarily through changes in source and site geometry, as well as rupture directivity. We also note a potential coupling between rupture directivity and basin effects, wherein directivity pulses are seemingly guided through the region’s deep, interconnected sedimentary basins. Overall, this work highlights the impacts of 3D source, path, and site effects on seismic hazard in the U.S. Pacific Northwest and substantially expands the catalog of simulated ground motions for Puget Sound area crustal faults.

Washington↗

USGS2025

Spatio-temporal evolution of distributed volcanic fields, case studies—Sierra Chichinautzin and Michoacán-Guanajuato, México

An analysis of 1,375 volcanoes in the Michoacán-Guanajuato (1,148 volcanoes in a 26,200 square-kilometer area) and Sierra Chichinautzin (227 volcanoes in a 3,500 square-kilometer area) volcanic fields in central Mexico identified patterns in the spatial and temporal distribution of past eruptions. A cluster agglomerative hierarchical method and kernel analysis confirmed that the Michoacán-Guanajuato volcanic field comprises four volcanic fields (Valle de Santiago, Uruapan, Apatzingán, and Pátzcuaro volcanic fields) controlled by different fault systems, indicating that it is not a single volcanic field but rather a group of volcanic fields (a “superfield”), each of which has distinct characteristics. In the Sierra Chichinautzin volcanic field, well-constrained isotopic ages were used to build a model of how the spatial distribution of the eruptions has changed over time. Two new 40Ar/39Ar ages from a locally recognized volcanic feature near the town of El Cantil, herein called El Cantil volcano (1,537±17 kilo-annum [ka]) and the volcanic feature at Cerro el Elefante (herein called El Elefante dome) (1,485±92 ka) belong to the oldest volcanic group identified in the Sierra Chichinautzin volcanic field, confirming the timing of the beginning of monogenetic volcanism in the region. Based on the volcanic groups identified in the Sierra Chichinautzin volcanic field, the youngest volcanism (less than 35 ka) is found only in the central-western sector of the field. Principal component analysis determined the directional trends of feeder dikes only for vents <10 ka in the Sierra Chichinautzin volcanic field. Possible magma migration paths through the crust were identified using seismic data from both volcanic fields using an earthquake catalog from 1973 to 2023, which includes 9,016 earthquakes in the Michoacán-Guanajuato volcanic field and 841 in the Sierra Chichinautzin volcanic field. The spatial distribution of the hypocenters does not highlight any trend that could be associated with superficial movement of magma in the Sierra Chichinautzin volcanic field. In the Michoacán-Guanajuato volcanic field, however, eight seismic swarms since 1997 have been detected. These swarms are interpreted to result from ascending magma. Strengthening monitoring systems and reinforcing mitigation measures to address volcanic hazards and risk are important means of preparing for future eruptions in both regions. Analysis such as those herein provide insights as to where an eruption might occur and may help mitigate volcanic hazards.

Michoacán-Guanajuato, Sierra Chichinautzin↗

USGS2026

Lithium brine potential of North Dakota: Results from the 2025 sampling program

Lithium (Li), classified as a critical mineral and key in energy storage applications because of its high energy density, faces unprecedented demand. This has driven interest in unconventional sources of Li, especially brines from sedimentary basins. Accordingly, the spatial distribution of basinal brinehosted Li resources across North America is becoming better defined, including the Williston Basin underlying Saskatchewan, Canada. This has led to growing investment and exploration by industry throughout the 2020s; however, despite this interest, the Li potential of basinal brines of the Williston Basin in North Dakota remain underexplored. This work presents the results from the 2025 joint brine sampling campaign between the North Dakota Geological Survey, the United States Geological Survey (USGS), and The University of Texas at Austin. Twenty-seven fluid samples were collected from producing oil and water source wells from eight stratigraphic intervals across western North Dakota and analyzed for major cation and anion concentrations. Similar to southeastern Saskatchewan, the highest Li concentrations were identified in the Devonian Duperow Formation, with concentrations up to 179 mg/L being observed in a well commingled between the Duperow and Red River Formations. Some samples from the overlying Birdbear Formation exceeded 75 mg/L, whereas Li concentrations were lower in the Madison Group (33-44 mg/L) and the Three Forks (50 mg/L), Dawson Bay (43 mg/L), Winnipegosis (23 mg/L), and Red River (40.0 mg/L) Formations. This work indicates Li resource potential exists across the Williston Basin and advances our understanding of the Li distribution in basinal brines which could provide a new domestic source of this critical mineral.

North Dakota↗

USGS2025

Shallow geologic framework of the Mississippi Sound and the potential for sediment resources

The Mississippi Sound, an estuarine environment located between the mainland and barrier islands bordering the northern Gulf of America (formerly the Gulf of Mexico), serves as a vital ecosystem for the States of Mississippi and Alabama. Spanning approximately 100 kilometers from east to west and covering 1,400 square kilometers, the sound is home to marine industry and ports, and its shallow and brackish waters sustain a diverse array of marine life. Barrier islands along the southern edge of the sound separate the microtidal estuary from the Gulf of America. This protection from gulf wave action mediates current flow within the sound, resulting in predominantly fine-grained sediment deposition along the seafloor. This study, conducted by the U.S. Geological Survey in cooperation with the U.S. Army Corps of Engineers, provides insight on fluvial and tidal processes spanning the past 5,000 years. The report synthesizes existing research to provide a comprehensive overview of the sound geology, from Pleistocene origins to present-day morphology, and utilizes high-resolution single channel seismic profiles and sediment data to identify and map sedimentary deposits and morphologic features at and below the seafloor. Despite its ecological significance, the Mississippi Sound faces environmental challenges, including water-quality issues, habitat degradation, storm-induced erosion, and the ongoing threats of sea-level rise and environmental changes. This study uses the present-day understanding of the sound's geology to inform coastal management decisions, hazard assessment, and potential mineral resources.

Louisiana, Mississippi↗

USGS2024

Repeated coseismic uplift of coastal lagoons above the Patton Bay Splay Fault System, Montague Island, Alaska, USA

Coseismic slip on the Patton Bay splay fault system during the 1964 M w 9.2 Great Alaska Earthquake contributed to local tsunami generation and vertically uplifted shorelines as much as 11 m on Montague Island in Prince William Sound (PWS). Sudden uplift of 3.7–4.3 m caused coastal lagoons along the island's northwestern coast to gradually drain. The resulting change in depositional environment from marine lagoon to freshwater muskeg created a sharp, laterally continuous stratigraphic contact between silt and overlying peat. Here, we characterize the geomorphology, sedimentology, and diatom ecology across the 1964 earthquake contact and three similar prehistoric contacts within the stratigraphy of the Hidden Lagoons locality. We find that the contacts signal instances of abrupt coastal uplift that, within error, overlap the timing of independently constrained megathrust earthquakes in PWS—1964 Common Era, 760–870 yr BP, 2500–2700 yr BP, and 4120–4500 yr BP. Changes in fossil diatom assemblages across the inferred prehistoric earthquake contacts reflect ecological shifts consistent with repeated draining of a lagoon system caused by >3 m of coseismic uplift. Our observations provide evidence for four instances of combined megathrust-splay fault ruptures that have occurred in the past ∼4,200 years in PWS. The possibility that 1964-style combined megathrust-splay fault ruptures may have repeated in the past warrants their consideration in future seismic and tsunami hazards assessments.

Alaska↗