Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Environmental Geology and Water Sciences”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources
USGS2004

Use of 87 Sr/ 86 Sr and δ 11 B to Identify Slag-Affected Sediment in Southern Lake Michigan

Slag is a ubiquitous byproduct of the iron-smelting industry and influences geochemistry and water quality in adjacent geologic units, ground and surface water. Despite extensive slag deposition along the Indiana shoreline of Lake Michigan, definitive evidence that slag has affected lakebed sediments has not been established. Concerns for the protection of water and ecosystem resources in the Great Lakes motivated this study to determine if strontium and boron isotopes could be used to identify and delineate slag-affected bed sediment in Lake Michigan. Sixty-five samples of bed sediment were acquired from the southern lobe of Lake Michigan and analyzed for 87Sr/86Sr and ??11B. Samples immediately offshore from Indiana steel mills and slag-disposal sites contained higher median 87Sr/86Sr values (0.70881) than shoreline sediments collected elsewhere in the basin (0.70847) and uniquely decreased with increasing distance from the shoreline. The highest ??11B values occurred in sediments from the Indiana shoreline (+12.9 to 16.4???) but were also elevated in sediments collected offshore from three Lake Michigan cities (+11.7 to 12.7???). Contoured isotope data indicated that 82-154 km2 of bed sediment along the Indiana shoreline had elevated 87Sr/86Sr and ??11B values relative to shoreline sediments elsewhere in southern Lake Michigan.

Environmental Science & Technology↗
USGS2008

EAARL submerged topography– U.S. Virgin Islands 2003

These remotely sensed, geographically referenced elevation measurements of Lidar-derived submerged topography were produced as a collaborative effort between the U.S. Geological Survey (USGS), Florida Integrated Science Center (FISC), St. Petersburg, FL; the National Park Service (NPS), South Florida-Caribbean Network, Miami, FL; and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, VA. This project provides highly detailed and accurate bathymetric datasets of a portion of the U.S. Virgin Islands, acquired on April 21, 23, and 30, May 2, and June 14 and 17, 2003. The datasets are made available for use as a management tool to research scientists and natural resource managers. An innovative airborne Lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) Lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive Lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multi-spectral color infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for submeter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a Lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of Lidar data in an interactive or batch mode. Modules for presurvey flight line definition, flight path plotting, Lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or first surface topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

St John Island↗
USGS2021

Streamflow response to potential changes in climate in the Upper Rio Grande Basin

The Rio Grande is a vital water source for the southwestern States of Colorado, New Mexico, and Texas and for northern Mexico. The river serves as the primary source of water for irrigation in the region, has many environmental and recreational uses, and is used by more than 13 million people including those in the Cities of Albuquerque and Las Cruces, New Mexico; El Paso, Texas; and Ciudad Juárez, Chihuahua, Mexico. However, concern is growing over the increasing gap between water supply and demand in the Upper Rio Grande Basin. As populations increase and agricultural crop patterns change, demands for water are increasing, at the same time the region is undergoing a decrease in supply due to drought and climate change. Quantifying the impact of projected climate change on Rio Grande streamflow is difficult because of numerous anthropogenic influences on the hydrologic system. The conveyance and use of surface water in the Upper Rio Grande Basin are achieved through an engineered system of reservoirs, diversions, and irrigation canals designed to deliver water to agricultural, municipal, and industrial users, who greatly reduce the cumulative volume of water in the river. For example, streamflow at Fort Quitman, Tex., the southernmost point of the Upper Rio Grande Basin, has undergone a 95-percent reduction in flow relative to the river’s native state, and some stretches of the river can intermittently go dry. Because streamflow in the basin is highly altered, disentangling the impacts of climate change and changes in streamflow due to anthropogenic influences such as dams, diversions, and other forms of water use is difficult. Therefore, a model of naturalized flow was developed to determine to what degree changes in streamflow can be attributed to potential changes in future temperature and precipitation without quantifying future changes in anthropogenic influences. This study, conducted by the U.S. Geological Survey in cooperation with the South Central Climate Adaptation Science Center and the U.S. Army Corps of Engineers, included the development and calibration of a watershed model of the Upper Rio Grande Basin using the Precipitation-Runoff Modeling System to simulate naturalized streamflow conditions for historical and future time periods.

Colorado, New Mexico, Texas↗
USGS2010

EAARL coastal topography-Cape Hatteras National Seashore, North Carolina, post-Nor'Ida, 2009: first surface

These remotely sensed, geographically referenced elevation measurements of lidar-derived first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the National Park Service Southeast Coast Network's Cape Hatteras National Seashore in North Carolina, acquired post-Nor'Ida (November 2009 nor'easter) on November 27 and 29 and December 1, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series↗
USGS2011

EAARL Coastal Topography-Cape Hatteras National Seashore, North Carolina, Post-Nor'Ida, 2009: Bare Earth

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the National Park Service Southeast Coast Network's Cape Hatteras National Seashore in North Carolina, acquired post-Nor'Ida (November 2009 nor'easter) on November 27 and 29 and December 1, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations.

Data Series↗
USGS2024

Occurrence of mixed organic and inorganic chemicals in groundwater and tapwater, town of Campbell, Wisconsin, 2021–22

In response to previous reports of per- and polyfluoroalkyl substances (PFAS) contamination in French Island’s (located in the Mississippi River within the town of Campbell, Wisconsin) primary source of drinking water, 11 locations were sampled by the U.S. Geological Survey (USGS) in October 2021 to assess the potential presence of contaminant mixtures, including PFAS, in tapwater. Three locations were assessed seven times each over the course of three days. These samples were chosen to evaluate the water quality of the deeper Mount Simon bedrock aquifer and the water quality of the shallower sand and gravel (alluvial) aquifer at two locations. The other eight sample locations were spatially distributed within Campbell and were sampled once each. For each of these 11 sites, tapwater samples were analyzed for disinfection byproducts (DBP), pesticides, PFAS, pharmaceuticals, semi-volatile organic compounds (SVOC), volatile organic compounds (VOC), cations, anions, trace elements, alkalinity, microbial indicators, as well as measurements of water temperature, specific conductance, and pH. Of the 506 organic compounds analyzed in each water-quality sample, 74 (14 percent) were detected at least one time in any of the samples collected. Of the 14 percent, detected analytes included 27 pesticides (5 percent), 14 PFAS (3 percent), 6 pharmaceuticals (1 percent), 7 SVOC (1 percent), and 20 VOC (4 percent). No DBP were detected. The total number of organic compounds detected per sample ranged from 0–20 (median of 10), with the sum of concentrations ranging from not detected (nd)–2.53 micrograms per liter (μg/L; median of 0.333 μg/L). Of the inorganic constituents measured, eight were not detected above their reporting limit in any of the samples. The inorganic constituents that were not detected were antimony, arsenic, beryllium, cadmium, cobalt, molybdenum, selenium, and vanadium. Along with the 11 sites sampled throughout Campbell, Wisconsin, beginning in October 2021, four more wells were sampled on the Upper Midwest Environmental Sciences Center (UMESC) campus for PFAS. Three of these sites withdraw water from the shallow alluvial aquifer (the same source water for tapwater site 002) and one from the Mount Simon aquifer (the same source of water for tapwater site 001). This sampling is ongoing with results from samples through December 2022 summarized in this report. Of the 33 PFAS analyzed in samples from the four UMESC locations, 15 individual PFAS were detected at least one time in any of the samples analyzed with the sum of PFAS concentrations ranging from nd–1.49 μg/L (median of 0.309 μg/L).

Wisconsin↗
USGS2015

The Penobscot River and environmental contaminants: Assessment of tribal exposure through sustenance lifeways

EPA in collaboration with the Penobscot Indian Nation, U.S. Geological Survey (USGS), Agency for Toxic Substances and Disease Registry (ATSDR), and the U.S. Fish and Wildlife Service (USF&WS) collectively embarked on a four year research study to evaluate the environmental health of the riverine system by targeting specific cultural practices and using traditional science to conduct a preliminary contaminant screening of the flora and fauna of the Penobscot River ecosystem. This study was designed as a preliminary screening to determine if contaminant concentrations in fish, eel, snapping turtle, wood ducks, and plants in Regions of the Penobscot River relevant to where PIN tribal members hunt, fish and gather plants were high enough to be a health concern. This study was not designed to be a statistically validated assessment of contaminant differences among study sites or among species. The traditional methodology for health risk assessment used by the U. S. Environmental Protection Agency (EPA) is based on the use of exposure assumptions (e.g. exposure duration, food ingestion rate, body weight, etc.) that represent the entire American population, either as a central tendency exposure (e.g. average, median) or as a reasonable maximum exposure (e.g. 95% upper confidence limit). Unfortunately, EPA lacked exposure information for assessing health risks for New England regional tribes sustaining a tribal subsistence way of life. As a riverine tribe, the Penobscot culture and traditions are inextricably tied to the Penobscot River watershed. It is through hunting, fishing, trapping, gathering and making baskets, pottery, moccasins, birch-bark canoes and other traditional practices that the Penobscot culture and people are sustained. The Penobscot River receives a variety of pollutant discharges leaving the Penobscot Indian Nation (PIN) questioning the ecological health and water quality of the river and how this may affect the practices that sustain their way of life. The objectives of this Regional Applied Research Effort (RARE) study were to: Develop culturally sensitive methodologies for assessing the potential level of exposure tocontaminants that Penobscot Indian Nation tribal members may have from maintainingtribal sustenance practices. Conduct field surveys and laboratory analysis on targeted flora and fauna for chemicalexposure to dioxins/furans, polychlorinated biphenyls (PCBs), total mercury and methyl-mercury. Assist the Agency for Toxic Substances and Disease Registry (ATSDR) by providing thenecessary data to conduct a Public Health Assessment for the Penobscot Indian Nation. Establish protocols for assessing the level of exposure to PCBs, dioxins/furans and mercuryto PIN tribal members as a consequence of gathering tribal plants for medicinal andnutritional purposes; as well as consuming fish, wood duck, and snapping turtle as a primarysource of nutrition. Survey surface water, drinking water, and sediment from the Penobscot River and IndianIsland to assess the exposure of PIN tribal members to environmental genotoxicants thatcontinue cultural sustenance practices. This research initiative collected and analyzed sediment and biota to determine the level of contaminant exposure to Penobscot tribal members. Natural resource utilization patterns and exposure pathways were identified based on discussions with the Tribal elders. Identification of Tribal exposure factors (exposure pathways and contaminant concentrations) was essential for accurately assessing potential long-term Penobscot Indian Nation tribal members’ exposure. Based on this study, ATSDR’s Public Health Assessment (PHA) concluded that the Penobscot Indian Nation (PIN) tribal members who eat fish and snapping turtle at the ingestion levels suggested in the Wabanaki Traditional Cultural Lifeways Exposure Scenario Report (Wabanaki Exposure Scenario) may be exposed to harmful levels of mercury, dioxins/furans, dioxin-like PCBs, and ot

Maine↗
USGS2026

Evaluating machine learning approaches to identify and predict oil and gas produced water lithium concentrations

Recently, the demand for battery-grade lithium has substantially increased, largely due to electrification of the transportation sector. The search for new lithium sources has turned to produced waters (frequently brines), a large-volume wastewater by-product of oil and gas extraction. Geochemical analysis indicates the presence of varying concentrations of lithium from produced water samples collected across the United States and represented in the U.S. Geological Survey’s National Produced Water Geochemical Database, as well as mixtures of Marcellus Shale produced water included in the Pennsylvania Department of Environmental Protection’s Oil and Gas Well Waste Reports. We first examined whether the geochemical signature of the lithium-bearing produced waters is sufficiently distinct so that machine learning (ML) can be used to correctly classify samples to the formation of origin. The produced water sample data used to assess classification accuracy were from the Marcellus Shale, Utica Shale and Point Pleasant Formation (Utica), and Smackover Formation oil and gas wells. Further, we evaluated the potential for ML to accurately classify Marcellus Shale produced water spatially (i.e., northeast versus southwest Pennsylvania). We then investigated whether ML algorithms applied to a suite of geochemical concentration data (i.e. Ba, Br, Cl, K, Mg, Sr) may be used to predict the lithium concentration of an unknown sample. Finally, we applied an estimated economic lithium grade cutoff of 150 milligrams per liter (mg/l) and assessed the utility of ML to predict whether a produced water sample would fall above or below the grade cutoff based on the suite of geochemical parameters. Four machine learning algorithms—Random Forest (RF), Gradient Boosting Trees (GBT), Extreme Boosting (XGBoost), and Deep Neural Networks (DNN) were assessed. This study successfully demonstrates that all four machine learning methods can precisely and accurately estimate lithium concentrations and geologic formation classification. The products of this study contribute to the growing body of knowledge aimed at expanding the lithium resource base within the United States.

Alabama, Arkansas, Florida, Georgia, Louisiana, Mi↗
USGS2013

Seventy-five years of science—The U.S. Geological Survey’s Western Fisheries Research Center

As of January 2010, 75 years have elapsed since Dr. Frederic Fish initiated the pioneering research program that would evolve into today’s Western Fisheries Research Center (WFRC). Fish began his research working alone in the basement of the recently opened Fisheries Biological Laboratory on Lake Union in Seattle, Washington. WFRC’s research began under the aegis of the U.S. Fish and Wildlife Service and ends its first 75 years as part of the U.S. Geological Survey with a staff of more than 150 biologists and support personnel and a heritage of fundamental research that has made important contributions to our understanding of the biology and ecology of the economically important fish and fish populations of the Nation. Although the current staff may rarely stop to think about it, WFRC’s antecedents extend many years into the past and are intimately involved with the history of fisheries conservation in the Western United States. Thus, WFRC Director Lyman Thorsteinson asked me to write the story of this laboratory “while there are still a few of you around who were here for some of the earlier years” to document the rich history and culture of WFRC by recognizing its many famous scientists and their achievements. This historyalso would help document WFRC’s research ‘footprint’ in the Western United States and its strategic directions. Center Director Thorsteinson concluded that WFRC’s heritage told by an emeritus scientist also would add a texture of legitimacy based on personal knowledge that will all-to-soon be lost to the WFRC and to the USGS. The WFRC story is important for the future as well as for historical reasons. It describes how we got to the place we are today by documenting the origin, original mission, and our evolving role in response to the constantly changing technical information requirements of new environmental legislation and organizational decision-making. The WFRC research program owes its existence to the policy requirements of Federal conservation legislation originating with the construction of Grand Coulee Dam in 1933. The research program was shaped by laws enacted in subsequent years such as the Federal Water Pollution Control Act (1972), National Environmental Policy Act (1973), Endangered Species Act (1974), and Northwest Power Planning Act (1980), to name only a few. The WFRC has not been constrained by direct management or regulatory responsibility for a particular fishery (such as providing sustainable catch limits data to a resource management structure). Thus, WFRC has been able to concentrate on scientific pursuits and information needs required by contemporary environmental legislation. Over the years, we have pioneered in several important areas of fisheries research including the diagnoses and control of diseases in economically important fish, effects of environmental alterations on the physiological quality and survival of Pacific salmon released from federal mitigation hatcheries, applications in biotelemetry, and the bioenergetics of predator-prey interactions in the Columbia River. The WFRC of today is a widely distributed organization in the Western United States. Knowledge of the historical connections and accomplishments of our predecessors is important beyond the sense of pride and unity it instills in the WFRC family of today. For example, a discerning reader will note the evolution of WFRC’s research from a single disciplinary focus (early era—hatchery disease problems), to multiple disciplines (middle to late era—species, populations, habitats; threatened and endangered species), to the present era (multidisciplinary and with increasing process focus). For the benefit of the current WFRC staff, more emphasis has been placed on the early years rather than on the present day because people are quite naturally more familiar with the recent past than with the research done during the first decades of WFRC’s existence. By every rational measure, the WFRC has evolved into a fisheries research organization well positioned to provide the biological information needed to support the continued conservation and management of our Nation’s living aquatic natural resources. The high standard of excellence that connects WFRC’s past to our present research program provides a firm foundation on which to base the work yet to be done. In another 75 years, WFRC will undoubtedly be a very different place than it is today, but its evolution will be forever rooted in the story of the research and of the people related here. More about the diverse fisheries research projects WFRC scientists are conducting today is available at WFRC’s website: http://wfrc.usgs.gov/.

Washington↗
USGS2010

Nitrate in groundwater of the United States, 1991-2003

An assessment of nitrate concentrations in groundwater in the United States indicates that concentrations are highest in shallow, oxic groundwater beneath areas with high N inputs. During 1991-2003, 5101 wells were sampled in 51 study areas throughout the U.S. as part of the U.S. Geological Survey National Water-Quality Assessment (NAWQA) program. The well networks reflect the existing used resource represented by domestic wells in major aquifers (major aquifer studies), and recently recharged groundwater beneath dominant land-surface activities (land-use studies). Nitrate concentrations were highest in shallow groundwater beneath agricultural land use in areas with well-drained soils and oxic geochemical conditions. Nitrate concentrations were lowest in deep groundwater where groundwater is reduced, or where groundwater is older and hence concentrations reflect historically low N application rates. Classification and regression tree analysis was used to identify the relative importance of N inputs, biogeochemical processes, and physical aquifer properties in explaining nitrate concentrations in groundwater. Factors ranked by reduction in sum of squares indicate that dissolved iron concentrations explained most of the variation in groundwater nitrate concentration, followed by manganese, calcium, farm N fertilizer inputs, percent well-drained soils, and dissolved oxygen. Overall, nitrate concentrations in groundwater are most significantly affected by redox conditions, followed by nonpoint-source N inputs. Other water-quality indicators and physical variables had a secondary influence on nitrate concentrations.

Environmental Science & Technology↗
USGS2025

Insights and strategic opportunities from the USGS 2024 Per- and Polyfluoroalkyl Substances (PFAS) Interagency Workshop

Introduction In 2021, the U.S. Geological Survey (USGS) published Circular 1490 titled, “Integrated Science for the Study of Perfluoroalkyl and Polyfluoroalkyl Substances (PFAS) in the Environment: A Strategic Science Vision for the U.S. Geological Survey” (Tokranov and others, 2021). Circular 1490 was created to be a resource for USGS scientists prioritizing and planning research related to per- and polyfluoroalkyl substances (PFAS) and to be a guide for developing partnerships with other scientists, State and Federal agencies, and stakeholders engaged in PFAS research and management and mitigation of the environmental and human-health effects of PFAS. This USGS PFAS Strategic Science Vision document was intended to be the foundation for a “living strategic vision,” periodically providing updates on the state of USGS PFAS research, emerging PFAS data gaps and needs, and progress on interagency and stakeholder PFAS partnerships and priorities. To meet this objective, the USGS planned to host an Interagency and Stakeholder PFAS Workshop every 2–3 years. During September 10–12, 2024, the USGS hosted the first Interagency and Stakeholder PFAS Workshop in Reston, Virginia. The Workshop brought together experts from other Federal agencies (U.S. Environmental Protection Agency, National Institute of Environmental Health Sciences, Food and Drug Administration, Department of Defense [Air Force, Army]), State agencies (Washington Fish and Wildlife, Virginia Department of Transportation), and academia (Harvard University, University of Maryland) to address key challenges relating to the measurement and modeling of PFAS and the implications for environmental health. Participants engaged in in-depth discussions centered around six pivotal topics related to PFAS: (1) sampling protocols, methods and interpretation; (2) environmental sources, source apportionment, and occurrence; (3) environmental fate and transport; (4) human and wildlife exposure routes and risk; (5) bioconcentration, bioaccumulation, and biomagnification; and (6) ecotoxicology and effects. Each topic had three breakout sessions. A recurrent theme of workshop discussions was how data on a nationwide scale for PFAS occurrence in various environmental matrices, including air, water, food crops, biota, soil, and streambed sediment could help to advance scientific understanding. Participants noted significant geospatial data gaps, particularly in the midwestern and southern United States and the Pacific Northwest. PFAS data collection tends to be more robust along the eastern seaboard and in California. Participants stressed how enhancing the integration of large and small datasets across various agencies could help to support national scale understanding of PFAS. To address these gaps, attendees suggested leveraging datasets from Federal entities like the USGS and the U.S. Department of Defense, State agencies, and municipal utility services to develop predictive contaminant detection and transport models. Improved coordination between water quality programs and USGS research could help to facilitate access to valuable data, leading to comprehensive databases that inform PFAS point (wastewater treatment plants and landfills) and nonpoint (runoff from land, atmospheric deposition, food packaging) sources, environmental transport mechanisms, environmental detection and concentrations, potential exposure routes, and health effects on different biota, including humans. A specific request was made to develop a map demarking the depth of modern (1953 or later) groundwater, which is susceptible to surface-derived anthropogenic (that is, human-made) contamination, based on tritium-age dating. Emphasis was placed on incorporation of hydrology, groundwater flow paths, groundwater–surface water interactions, and landscape factors in predictive statistical models as a step to improve contaminant source identification and tracking. Molecular fingerprinting approaches garnered attention as techniques to link specific PFAS mixtures detected in a sample to environmental sources and levels in biota (Dávila-Santiago and others, 2022). Integrating data from abiotic (that is, water, soil, and air) and biotic (that is, living organisms) systems identified as a research opportunity. For example, understanding the composition of soils and sediments, which include a mixture of mineral, plant, and animal components, could advance understanding of exposure pathways. The discussions highlighted opportunities to explore and understand the potential redistribution and biotic exposures of PFAS from biosolid and wastewater treatment plant effluent land application practices, in addition to atmospheric releases and discharges from landfill and wastewater treatment plants. Participants identified research gaps surrounding how these sources may contribute to contamination and may affect surrounding ecosystems, including a better definition of anthropogenic background concentrations. Moving forward, the collection of co-occurrence data was noted as a means to improve understanding of complex mixtures and to leverage companion modeling efforts focused on areas with high and low contamination levels to identify areas of concern and unaffected resources. Participants emphasized how centralized USGS databases and the establishment of sample-metadata archives can help to ensure that samples are preserved and accessible for future research. In conclusion, the workshop participants identified opportunities to bridge data gaps and improve measurement techniques, modeling frameworks, databases, and communication, to enhance the understanding of PFAS and their effects on environmental and human health. Upon completion of the workshop, participants indicated an interest in developing strategic data collection, modeling, and analytical approaches to address these challenges.

Open-File Report↗
USGS2016

Regional effects of agricultural conservation practices on nutrient transport in the Upper Mississippi River Basin

Despite progress in the implementation of conservation practices, related improvements in water quality have been challenging to measure in larger river systems. In this paper we quantify these downstream effects by applying the empirical U.S. Geological Survey water-quality model SPARROW to investigate whether spatial differences in conservation intensity were statistically correlated with variations in nutrient loads. In contrast to other forms of water quality data analysis, the application of SPARROW controls for confounding factors such as hydrologic variability, multiple sources and environmental processes. A measure of conservation intensity was derived from the USDA-CEAP regional assessment of the Upper Mississippi River and used as an explanatory variable in a model of the Upper Midwest. The spatial pattern of conservation intensity was negatively correlated ( p = 0.003) with the total nitrogen loads in streams in the basin. Total phosphorus loads were weakly negatively correlated with conservation ( p = 0.25). Regional nitrogen reductions were estimated to range from 5 to 34% and phosphorus reductions from 1 to 10% in major river basins of the Upper Mississippi region. The statistical associations between conservation and nutrient loads are consistent with hydrological and biogeochemical processes such as denitrification. The results provide empirical evidence at the regional scale that conservation practices have had a larger statistically detectable effect on nitrogen than on phosphorus loadings in streams and rivers of the Upper Mississippi Basin.

Environmental Science & Technology↗
USGS1997

Risk of nitrate in groundwaters of the United States - A national perspective

Nitrate contamination of groundwater occurs in predictable patterns, based on findings of the U.S. Geological Survey's (USGS) National Water Quality Assessment (NAWQA) Program. The NAWQA Program was begun in 1991 to describe the quality of the Nation's water resources, using nationally consistent methods. Variables affecting nitrate concentration in groundwater were grouped as 'input' factors (population density end the amount of nitrogen contributed by fertilizer, manure, and atmospheric sources) and 'aquifer vulnerability' factors (soil drainage characteristic and the ratio of woodland acres to cropland acres in agricultural areas) and compiled in a national map that shows patterns of risk for nitrate contamination of groundwater. Areas with high nitrogen input, well-drained soils, and low woodland to cropland ratio have the highest potential for contamination of shallow groundwater by nitrate. Groundwater nitrate data collected through 1992 from wells less than 100 ft deep generally verified the risk patterns shown on the national map. Median nitrate concentration was 0.2 mg/L in wells representing the low-risk group, and the maximum contaminant level (MCL) was exceeded in 3% of the wells. In contrast, median nitrate concentration was 4.8 mg/L in wells representing the high-risk group, and the MCL was exceeded in 25% of the wells.Nitrate contamination of groundwater occurs in predictable patterns, based on findings of the U.S. Geological Survey's (USGS) National Water Quality Assessment (NAWQA) Program. The NAWQA Program was begun in 1991 to describe the quality of the Nation's water resources, using nationally consistent methods. Variables affecting nitrate concentration in groundwater were grouped as `input' factors (population density and the amount of nitrogen contributed by fertilizer, manure, and atmospheric sources) and `aquifer vulnerability' factors (soil drainage characteristic and the ratio of woodland acres to cropland acres in agricultural areas) and compiled in a national map that shows patterns of risk for nitrate contamination of groundwater. Areas with high nitrogen input, well-drained soils, and low woodland to cropland ratio have the highest potential for contamination of shallow groundwater by nitrate. Groundwater nitrate data collected through 1992 from wells less than 100 ft deep generally verified the risk patterns shown on the national map. Median nitrate concentration was 0.2 mg/L in wells representing the low-risk group, and the maximum contaminant level (MCL) was exceeded in 3% of the wells. In contrast, median nitrate concentration was 4.8 mg/L in wells representing the high-risk group, and the MCL was exceeded in 25% of the wells.

Environmental Science & Technology↗
USGS2005

Chemical loading into surface water along a hydrological, biogeochemical, and land use gradient: A holistic watershed approach

Identifying the sources and impacts of organic and inorganic contaminants at the watershed scale is a complex challenge because of the multitude of processes occurring in time and space. Investigation of geochemical transformations requires a systematic evaluation of hydrologic, landscape, and anthropogenic factors. The 1160 km 2 Boulder Creek Watershed in the Colorado Front Range encompasses a gradient of geology, ecotypes, climate, and urbanization. Streamflow originates primarily as snowmelt and shows substantial annual variation. Water samples were collected along a 70-km transect during spring-runoff and base-flow conditions, and analyzed for major elements, trace elements, bulk organics, organic wastewater contaminants (OWCs), and pesticides. Major-element and trace-element concentrations were low in the headwaters, increased through the urban corridor, and had a step increase downstream from the first major wastewater treatment plant (WWTP). Boron, gadolinium, and lithium were useful inorganic tracers of anthropogenic inputs. Effluent from the WWTP accounted for as much as 75% of the flow in Boulder Creek and was the largest chemical input. Under both hydrological conditions, OWCs and pesticides were detected in Boulder Creek downstream from the WWTP outfall as well as in the headwater region, and loads of anthropogenic-derived contaminants increased as basin population density increased. This report documents a suite of potential endocrine-disrupting chemicals in a reach of stream with native fish populations showing indication of endocrine disruption.

Environmental Science & Technology↗
USGS2024

Produced water geochemistry from hydraulically stimulated Niobrara Formation petroleum wells: Origin of salinity and temporal perspectives on treatment and reuse

Produced water (i.e., a mixture of returned injection fluids and geologic formation brines) represents the largest volumetric waste stream associated with petroleum production in the United States. As such, produced water has been the focus of intense study with emphasis on understanding the geologic origin of the fluids, environmental impacts of unintended or intentional release, disposal concerns, and their commodity (e.g., lithium) potential. However, produced water geochemistry from many active petroleum plays remain poorly constrained leading to knowledge gaps associated with the origin of brine salinity and parameters (e.g., radium levels) that can impact treatment, disposal, and possible reuse. Here we evaluate the major ion geochemistry, radium concentrations, and stable water isotope composition of ~120 produced water samples collected from 17 producing unconventional petroleum wells in Weld County, Colorado from the Late Cretaceous Niobrara Formation. This sample set encompasses eight produced water time series from four new wells across production days 0 to ~365 and from four established wells across production days ~1000 to ~1700. Additionally, produced water from nine other established Niobrara Formation wells were sampled at discrete time points ranging from day 458 to day 2256, as well as hydraulic fracturing input fluids. These results expand the available Niobrara Formation produced water geochemical data, previously limited to few wells sampled within the first year of production, allowing for the heterogeneity of major ions and radium to be evaluated. Furthermore, we explore the geochemical relationships between major ion ratios and stable water isotope composition to understand the origin of salinity in Niobrara Formation brines from the Denver-Julesburg Basin. These findings are discussed with perspective toward potential treatment and reuse of Niobrara produced water prior to disposal.

Colorado, Nebraska, Wyoming↗
USGS2005

Trends in hydrophobic organic contaminants in urban and reference lake sediments across the United States, 1970-2001

A shift in national policy toward stronger environmental protection began in the United States in about 1970. Conversely, urban land use, population, energy consumption, and vehicle use have increased greatly since then. To assess the effects of these changes on water quality, the U.S. Geological Survey used sediment cores to reconstruct water-quality histories for38 urban and reference lakes across the United States. Cores were age-dated, and concentration profiles of polycyclic aromatic hydrocarbons (PAHs) and chlorinated hydrocarbons were tested statistically. Significant trends in total DDT, p,p???-DDE, and total PCBs were all downward. Trends in chlordane were split evenly between upward and downward, and trends in PAHs were mostly upward. Significant trends did not occur in about one-half of cases tested. Concentrations of p,p???-DDE, p,p???-DDD, and PCBs were about one-half as likely to exceed the probable effect concentration (PEC), a sediment quality guideline, in sediments deposited in the 1990s as in 1965-1975, whereas PAHs were twice as likely to exceed the PEC in the more recently deposited sediments. Concentrations of all contaminants evaluated correlated strongly with urban land use. Upward trends in PAH concentrations, the strong association of PAH with urban settings, and rapid urbanization occurring in the United States suggest that PAHs could surpass chlorinated hydrocarbons in the threat they pose to aquatic biota in urban streams and lakes.

Environmental Science & Technology↗
USGS1996

Acetochlor in the hydrologic system in the midwestern United States, 1994

The herbicide acetochlor [2-chloro- N -(ethoxymethyl)- N -(2-ethyl-6-methylphenyl)acetamide] was given conditional registration in the United States by the U.S. Environmental Protection Agency in March 1994. This registration provided a rare opportunity to investigate the occurrence of a pesticide during its first season of extensive use in the midwestern United States. Water samples collected and analyzed by the U.S. Geological Survey during 1994 documented the distribution of acetochlor in the hydrologic system; it was detected in 29% of the rain samples from four sites in Iowa, 17% of the stream samples from 51 sites across nine states, and 0% of the groundwater samples from 38 wells across eight states. Acetochlor exhibited concentration increases in rain and streams following its application to corn in the midwestern United States, with 75% of the rainwater and 35% of the stream samples having acetochlor detected during this time period. Acetochlor concentrations in rain decreased as the growing season progressed. Based on the limited data collected for this study, it is anticipated that acetochlor concentrations will have a seasonal pattern in rain and streams similar to those of other acetanilide herbicides examined. Possible explanations for the absence of acetochlor in groundwater for this study include the rapid degradation of acetochlor in the soil zone, insufficient time for this first extensive use of acetochlor to have reached the aquifers sampled, and the possible lack of acetochlor use in the recharge areas for the wells examined.

Environmental Science & Technology↗
USGS2013

A GIS and statistical approach to identify variables that control water quality in hydrothermally altered and mineralized watersheds, Silverton, Colorado, USA

Hydrothermally altered bedrock in the Silverton mining area, southwest Colorado, USA, contains sulfide minerals that weather to produce acidic and metal-rich leachate that is toxic to aquatic life. This study utilized a geographic information system (GIS) and statistical approach to identify watershed-scale geologic variables in the Silverton area that influence water quality. GIS analysis of mineral maps produced using remote sensing datasets including Landsat Thematic Mapper, advanced spaceborne thermal emission and reflection radiometer, and a hybrid airborne visible infrared imaging spectrometer and field-based product enabled areas of alteration to be quantified. Correlations between water quality signatures determined at watershed outlets, and alteration types intersecting both total watershed areas and GIS-buffered areas along streams were tested using linear regression analysis. Despite remote sensing datasets having varying watershed area coverage due to vegetation cover and differing mineral mapping capabilities, each dataset was useful for delineating acid-generating bedrock. Areas of quartz–sericite–pyrite mapped by AVIRIS have the highest correlations with acidic surface water and elevated iron and aluminum concentrations. Alkalinity was only correlated with area of acid neutralizing, propylitically altered bedrock containing calcite and chlorite mapped by AVIRIS. Total watershed area of acid-generating bedrock is more significantly correlated with acidic and metal-rich surface water when compared with acid-generating bedrock intersected by GIS-buffered areas along streams. This methodology could be useful in assessing the possible effects that alteration type area has in either generating or neutralizing acidity in unmined watersheds and in areas where new mining is planned.

Colorado↗