Geology ReportsSearch

SEARCH · Geology Reports

Results for “Ecological Indicators”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

551 records · Page 19Linked to original sources

Forecast, monitor, adapt: A multi-agency strategy to protect people from postfire debris flows

In 2020, a wildfire burned across Glenwood Canyon in Colorado, USA. A history of postfire debris flows in the region and a hazard assessment for the burn area indicated that potentially life-threatening debris flows could be triggered by rainfall within months of a wildfire. As a result, four government agencies evaluated strategies to help mitigate hazards, including the loss of human life, that may be associated with debris-flow events. After the fire, 26 large debris flows occurred in the summer of 2021 and three sediment-laden flows occurred in the summer of 2023, but there were no major injuries or fatalities reported. We found that integrating hazard assessment/ forecasting, monitoring, and adaptation scenarios was a successful strategy for reducing postfire debris-flow risks to human life (including injuries and fatalities). Weather forecasts and estimates of debris-flow triggering rainfall thresholds, likelihood, and volume were used to anticipate the timing, location, and magnitude of debris-flow events. Rainfall monitoring and detailed recordkeeping of storms that triggered debris flows were used to validate and update debris-flow warning thresholds that varied with time following the wildfire. Although the governmental agencies working in this burn area had distinct and differing agency mandates, they were able to integrate information to reduce the risk of debris-flow events to human life.

Colorado

Wetter winters, drier summers: Quantifying the change in hydrological response around the Puget Sound area using the wflow_sbm hydrological model and CMIP6 projections

Climate change is expected to impact hydrological regimes worldwide, including the Pacific Northwest of the United States. This study investigates how climate change will affect river discharge in the Puget Sound region of the State of Washington, with a focus on King and Pierce Counties. We simulated river discharge under historical and future conditions using the physically based, spatially distributed wflow_sbm hydrological model, which was calibrated and validated against U.S. Geological Survey discharge records. Future forcing was based on an ensemble of six high-resolution CMIP6 climate models, which were bias corrected using empirical quantile mapping. The results indicate a decrease in summer discharges (5–10%) and an increase in winter discharges (5–10%) across the study region. The high discharges (90th percentile) are projected to increase in winter, and the low discharges are projected to decrease in summer, due to shifts in precipitation regimes, snowpack hydrology, and evapotranspiration. However, variability between individual CMIP6 models often exceeds the magnitude of ensemble mean changes, underscoring substantial uncertainty in climate projections and the importance of including multiple climate models in climate change analysis. Furthermore, model consensus increased with elevation, which could be the result of the higher elevation areas being driven by less diverse hydrological processes. These findings highlight potential challenges for regional water management, ecosystem health, and flood risk mitigation in the Puget Sound region under future climate conditions.

EarthArXiv

Non-radiometric borehole geophysical detection of geochemical halos surrounding sedimentary uranium deposits

Roll-type uranium deposits are formed by the concentration of uranium by ground water in geochemical cells. Non-uranium minerals having different solubilities may be deposited ahead of or behind the uranium minerals, forming halos that surround the ore. In addition, oxidizing and reducing environmental conditions may cause zones of mineral alteration to develop beyond the limits of the uranium deposit. Certain physical property anomalies that are commonly associated with halos can be detected by relatively fast and inexpensive borehole geophysical measurements made either in individual holes, or between two adjacent holes. Borehole measurements that have been found to be useful include electrical resistivity, induced polarization, and magnetic susceptibility. Electrical resistivity is increased by the presence of calcite and other cementing minerals that sometimes create permeability barriers in the neighborhood of uranium deposits. Induced polarization (IP) response is increased by sulfide and clay minerals that are commonly found in anomalous concentrations near roll-type deposits. Magnetic susceptibility is usually decreased by the oxidation of magnetite to hematite or limonite in the zone of chemical alteration that is left as a trail behind roll fronts. Borehole measurements of electrical resistivity, induced polarization and magnetic susceptibility were made in the vicinity of a uranium roll-type deposit in south Texas. Results indicate that mineral halos can be detected by borehole measurements made. in wide-spaced drill holes, and that the total amount of drilling needed to find a deposit can be reduced substantially by this exploration approach.

Open-File Report

Hydrogeologic framework and extent of saltwater intrusion in Kings, Queens, and Nassau Counties, Long Island, New York

In 2016, the U.S. Geological Survey began a multiyear cooperative study with the New York State Department of Environmental Conservation to evaluate the sustainability of Long Island’s sole-source aquifer system through hydrogeologic mapping, compilation of groundwater chloride concentrations, and groundwater flow modeling. In the initial phase of the islandwide study, the hydrogeologic framework and extent of saltwater intrusion in aquifers in Kings, Queens, and Nassau Counties on western Long Island, N.Y., were investigated. The aquifer system underlying western Long Island has been under stress from pumping of public, irrigation (golf course), and industrial supply wells. Saltwater intrusion has occurred from surrounding embayments (East River, Long Island Sound, Jamaica Bay, and the Atlantic Ocean) due to pumping. Eighteen boreholes were drilled and cores taken during 2019–21 to collect hydrogeologic, geochemical, and geophysical data to delineate the complex subsurface hydrogeology and extent of saltwater intrusion within the study area. Evaluation of the new cores, reexamination of legacy core descriptions, and analysis of borehole geophysical logs was used to refine the previously published hydrogeologic framework of Pleistocene and Cretaceous unconsolidated sediments in the area, including delineation of a previously undefined hydrogeologic unit between the Magothy aquifer and the Raritan confining unit, herein named the “upper Raritan aquifer.” The upper Raritan aquifer was first recognized in southeastern Nassau County from an analysis of about 50 closely spaced boreholes with high-resolution core descriptions and gamma-ray (gamma) logs. Further analysis of borehole logs across the study area indicated that the upper Raritan aquifer was also present in Kings and Queens Counties. Nuclear magnetic resonance (NMR) logging was used for the first time on Long Island to provide estimates of the hydraulic properties of the major aquifer and confining units. Unlike other geophysical logs that record responses to the rock matrix and fluid properties and are strongly dependent on mineralogy, NMR logs record responses to the presence of hydrogen protons in the formation fluid to determine water fraction and pore-size distribution. NMR log analysis provided estimates of the clay-bound, capillary-bound, and mobile water fractions and hydraulic conductivity of aquifers and confining units penetrated by five wells in Nassau County. Pumpage for public-supply and industrial wells on Long Island began in the 1870s with small, localized suppliers of populated areas in Kings and Queens Counties. By 1904–16, pumpage for public water supply in Kings County averaged 21 million gallons per day, and averaged 37 million gallons per day in Queens County, mostly from the upper glacial aquifer. Saltwater intrusion was reported as early as the beginning of the 20th century and included the upper glacial-Jameco-Magothy and Lloyd-North Shore aquifer systems. By 1936, pumping in central Kings County created a major cone of depression in the water table extending to the south shore of much of Kings County and into southwestern Queens County. Saltwater intrusion has caused the shutdown of public-supply wells in Kings, Queens, and Nassau Counties. A large saltwater intrusion wedge in the Lloyd aquifer was indicated in southern Queens County in the early part of the 20th century, and the saltwater interface may have been onshore predevelopment. Most of Kings and Queens Counties are intruded with saltwater in both the upper glacial-Jameco-Magothy and Lloyd-North Shore aquifers systems. Saltwater increased during the 20th century and continues to increase to the present (2023) in the Lloyd-North Shore aquifer system in Great Neck and Manhasset Neck in northern Nassau County. A major wedge of saltwater intrusion in the upper glacial-Jameco-Magothy aquifer in southwestern Nassau County appears to be increasing.

New York

Short-term sediment dispersal on a large retreating coastal river delta via 234Th and 7Be sediment geochronology: The Mississippi River Delta Front

Many Mississippi River Delta studies have shown recent declines in fluvial sediment load from the river and associated land loss. In contrast, recent sedimentary processes on the subaqueous delta are less documented. To help address this knowledge gap, multicores were collected offshore from the three main river outlets at water depths of 25–280 m in June 2017 just after the peak river discharge period, with locations selected based on 2017 U.S. Geological Survey seabed mapping. The coring locations included the undisturbed upper foreset, mudflow lobes, gullies, and the undisturbed prodelta. Nine multicores were analyzed for Beryllium-7 activity, and four cores were analyzed for excess Thorium-234 activity via gamma spectrometry, granulometry and X-radiography. Our results indicate a general trend of declining 7 Be and 234 Th activities and inventories with increasing distance from sources and in deeper water. The core X-radiographs are graded from the predominantly physically stratified nearshore to the more bioturbated offshore, consistent with the sedimentation patterns. Sediment focusing assessed via the 7 Be and 234 Th sediment inventories shows preferential sedimentation in gully and lobe environments, whereas the upper foreset and prodelta focusing factors are relatively depleted. Overall, short-term sediment deposition from the main fluvial source remains active offshore from all three major river outlets, despite the overall declining river load.

Louisiana

Escherichia coli monitoring and assessment in 2022 and 2023 after beach restoration at Lake St. Clair Metropark Beach, Macomb County, Michigan

Lake St. Clair Metropark Beach in Michigan has a history of closures because of elevated Escherichia coli ( E. coli ) concentrations in its recreational waters. To reduce closures, restoration projects were implemented in 2021 to deter waterfowl from congregating on the beach. In this study, the U.S. Geological Survey, in cooperation with the Michigan Department of the Environment, Great Lakes, and Energy and in collaboration with Huron-Clinton Metroparks and the Macomb County Health Department, monitored E. coli from 2022–23 in surface water, shallow groundwater, and sediment at Lake St. Clair Metropark Beach. Results were compared to data from a prerestoration (2018–19) study. A significant decrease in daily geometric mean E. coli concentrations in surface water was observed postrestoration, but the number of high concentration events increased. This resulted in more frequent beach closures postrestoration. Surface-sediment E. coli concentrations significantly decreased after restoration, and waterfowl populations generally decreased from 2021 to 2023, suggesting that the deterrence measures could be influencing E. coli concentrations in surface sediments and surface water. Groundwater E. coli concentrations were orders of magnitude higher than those in surface water and revealed no change correlated with restoration. Seepage measurements indicated that groundwater occasionally discharges into surface water, potentially providing a transport mechanism for E. coli to reach the lake. Continued monitoring and consideration of environmental factors could help to better understand the beach system.

Michigan

Helium detection as a guide for uranium exploration

Helium, a byproduct of radioactive decay, may prove to be a valuable indicator of the presence and distribution of uranium deposits. Recent technological advances permit the development of instrumentation not previously adapted for this purpose. Commercially available equipment can provide high sensitivity at low cost and allow reasonable mobility for field use. A truck-mounted mass-spectrometer, tuned for helium-4, permits immediate adjustment or modification of sampling patterns in response to accumulating data. The inlet system of the spectrometer has been designed to allow flexibility in gas analyses from various sample types--soil gas, atmosphere, or gases in water. Sensitivity of the instrument is better than 50 parts of helium per 10 9 parts of gas. Replicate samples and standards can be analyzed in only 3 minutes. Helium in soil gas is being used for the initial evaluation of the technique. A hollow probe, as much as 2 m long, is driven into the ground; and a 10-cc syringe is used to purge the probe and extract the gas. This sample is then injected into the inlet system and introduced into the spectrometer at constant pressure. The output signal is displayed on a chart recorder. Investigations can be performed on a qualitative, relative basis, or on a quantitative basis by comparison to calibrated helium standards. Preliminary field testing includes studies of the responses to variations in wind speed, temperature, barometric pressure, moisture, and sampling depth over extended time periods, as well as studies of geologic controls on the helium content in soil gas. Surveys over known uranium occurrences reveal some anomalous helium distributions. This report describes an updated technological approach to an old idea: that of using helium, a byproduct of uranium radioactive decay, as an exploration tool for uranium. Helium is the sixth most abundant gas found in the earth's atmosphere (Table 1). It is an inert gas and very mobile, mixing rapidly. When the alpha particles from the radioactive decay of uranium and thorium pick up two electrons, atoms of the isotope helium-4 are formed. Several helium-4 atoms are produced from each decay series of U-238, U-235, and Th-232 (fig. 1). The half-lives of the parent isotopes are5also shown in figure 1. One gram of uranium will produce ~10 5 atoms of helium-4 per second, and one gram of thorium produces ~2.5 x 10 4 atoms of helium-4 per second (fig. 2). Calculations of the helium produced from the crust and mantle reveal that 1,125 x 10 30 atoms per year are produced, but only 7 x 10 30 atoms per year escape from the earth (Damon and Kulp, 1958). More is being produced than is being lost; in fact, the total atmospheric content of helium could be produced in only 2 million years (MacDonald, 1963)! However, all the crustal and mantle helium-4 does not degas into the atmosphere as it is formed. It is trapped in crystal lattices and in pore spaces within the earth. What this means is that there is excess helium-4 in the earth--excess, that is, compared to the atmospheric concentration in equilibrium with the helium-4 escape rate into space and the helium-4 flux from the crust and mantle (Nicolet, 1957). Near-surface pockets of high helium-4 concentrations are known, and some natural gas fields are so enriched that they are the source for commercial production of helium. Work by Roberts and others (1975) has shown high helium concentration in the soil gas associated with geothermal areas; and work by Clark and Kugler (1973), Dyck (1975), and Goldak (1974), for example, has noted high helium concentrations in soils and waters in the vicinity of uranium deposits. These latter studies certainly indicate the potential of helium detection for use as an exploration tool for uranium.

Open-File Report

Assessing locations susceptible to shallow landslide initiation during prolonged intense rainfall in the Lares, Utuado, and Naranjito municipalities of Puerto Rico

Hurricane Maria induced about 70 000 landslides throughout Puerto Rico, USA, including thousands each in three municipalities situated in Puerto Rico's rugged Cordillera Central range. By combining a nonlinear soil-depth model, presumed wettest-case pore pressures, and quasi-three-dimensional (3D) slope-stability analysis, we developed a landslide susceptibility map that has very good performance and continuous susceptibility zones having smooth, buffered boundaries. Our landslide susceptibility map enables assessment of potential ground-failure locations and their use as landslide sources in a companion assessment of inundation and debris-flow runout. The quasi-3D factor of safety, F 3 , showed strong inverse correlation to landslide density (high density at low F 3 ). Area under the curve (AUC) of true positive rate (TPR) versus false positive rate (FPR) indicated success of F 3 in identifying head-scarp points (AUC = 0.84) and source-area polygons (0.85 ≤ AUC ≤ 0.88). The susceptibility zones enclose specific percentages of observed landslides. Thus, zone boundaries use successive F 3 levels for increasing TPR of landslide head-scarp points, with zones bounded by F 3 at TPR = 0.75, very high; F 3 at TPR = 0.90, high; and the remainder moderate to low. The very high susceptibility zone, with 118 landslides km −2 , covered 23 % of the three municipalities. The high zone (51 landslides km −2 ) covered another 10 %.

Puerto Rice

Ambient flow and transport in long-screened, sand-packed wells: Insights into cross contamination and wellbore flow

The presence of long-screened wells with a surrounding sand pack can have a major effect on the redistribution of contaminants in groundwater, particularly when the wells are set in low-hydraulic conductivity aquifers. Such redistribution, or cross contamination, can occur through vertical flow and advective transport or by in-well mixing via multiple non-advective transport processes. A multi-method approach, including the use of single borehole dilution tracer (SBDT) logging, was undertaken to estimate vertical transport of trichloroethylene (TCE) in 8 discontinued remedial extraction wells, all constructed with long screens (100 ft, or 30.6 m long) and surrounding sand packs, at Site 25, Edwards Air Force Base, California. The site is within an enclosed drainage basin that is underlain primarily by quartz-monzonite-granitic rocks in various states of weathering. Prior to this study, little information was available on the depths of fracture zones intersecting the wellbores. Results indicate that because of in-well mixing processes, a potential redistribution of TCE of up to 9 g/d per well occurs as a consequence of leaving the wells inactive (unpumped) and unsealed, as measured by SBDT logging. Simulations of flow made with a generic model of the site show that if the wells were to be sealed with well liners, with the intent of reducing vertical TCE transport but the sand pack left intact, TCE transport decreases by 53% overall compared to leaving the wells unlined.

Environmental Earth Sciences

An improved empirical model for predicting postfire debris-flow volume in the western United States

Reliable estimates of debris-flow volume can be used to help predict the magnitude of debris-flow hazards following wildfire in the western United States. In this study, we compiled and used a database of 227 postfire debris-flow volumes that were collected across the western United States to develop a multiple linear regression model for predicting postfire debris-flow volume. We explored 36 predictor variables related to rainfall, terrain, and fire characteristics, and selected the model with the combination of variables that yielded the most accurate predictions of debris-flow volume. We evaluated model performance against the entire volume database, as well as against four subsets of volume data from southern California, the Intermountain West, the Southwest, and regions with limited volume data, such as northern California and Washington. We also compared model performance against 3 existing postfire debris-flow volume models that were developed for use in southern California, the Intermountain West, and the Southwest. We demonstrate that the new volume model performs as well as the regional models in the regions for which they were developed and outperforms existing models when applied to volumes from data-limited regions in the western United States. These results indicate that the debris-flow volume model introduced in this study can be used to improve postfire hazard assessments across the western United States, especially outside of southern California.

Arizona, California, Colorado, New Mexico, Utah, W

Assessing earthquake risks to lifeline infrastructure systems in the United States

The security and economic stability of the United States rely heavily on robust lifeline infrastructure systems and yet the risks to such systems are seldom quantified at the national scale. For example, while earthquake risks to buildings in the United States have been investigated at the national scale regularly, such risks to gas pipelines have rarely been investigated nationally. In this paper, we use examples from two critical infrastructure sectors to demonstrate (1) the nature of earthquake risks to lifeline infrastructure systems, (2) complexities involved in regional seismic risk assessments, and (3) how such risks change with time. We found that bridge risks can be underestimated by at least 64 % when viewed from repair costs instead of traffic demands and that regional risks can be underestimated by 19 % when spatial correlations of ground motion are ignored. Further, exceedance of traffic demand can be 50 times more likely to occur when viewed at the regional scale than when viewed at an individual bridge. Similarly, exceedance of repairs can be 180 times more likely to occur when viewed at the pipeline network level than at a segment-specific level. Finally, sensitivity analyses with the 2018 and 2023 USGS National Seismic Hazard Models indicate an increase in bridge risk of at least 24 % and an increase in exposed gas pipeline mileage of 43 %. The evolution of risks, complexities involved in assessments, and limited resources jointly underscore the need for more routine updates to nationwide seismic risk assessments of lifeline systems in the United States.

International Journal of Critical Infrastructure P

Constraining source and path effects of large magnitude earthquakes using ground motion simulations

The purpose of this study is to use ground‐motion simulations to investigate ways in which source and path effects for large‐magnitude earthquakes can be represented in nonergodic ground‐motion models (GMMs). To achieve this, we designed a ground‐motion study in the San Francisco Bay Area that includes earthquakes with a broad range of magnitudes distributed uniformly on a fault plane, and sites covering a large range of rupture distances and azimuths. After running a large suite of kinematic simulations (magnitude 4–7), we then develop a nonergodic GMM with the simulated data. We find that trends in the within‐site residuals are affected significantly by the earthquake radiation pattern, rupture directivity, and slip patterns. Next, we modify an existing rupture directivity model to fit and remove the observed radiation pattern and rupture directivity from the residuals. We also minimize the contributions of slip patterns by averaging the within‐site residuals among multiple source realizations. Finally, after removing the source effects from the within‐site residuals, we compare the path effects computed with different magnitude groups using two approaches. The first approach only considers the small events that have the same shortest path to a site as the large events, whereas the second approach considers all small events on the fault plane. The results indicate that it is difficult to satisfactorily approximate the path effects of large events with those of small events using either approach, at least in the case of simulations.

California

Linking stream-reach nitrogen loads and groundwater “reachsheds” to inform wastewater-nitrogen management actions, Cape Cod, Massachusetts

Study Region Cape Cod, Massachusetts, U.S.A. Study Focus Anthropogenic nitrogen (N) is a key factor in degrading groundwater and surface-water quality, particularly in coastal New England where onsite wastewater systems are prevalent. This study evaluated whether direct N-load measurements in streams on Cape Cod, Massachusetts, coupled with flow-path information from groundwater-flow models, can effectively identify potential land areas where nitrogen mitigation could substantially reduce loads to receiving waters. Nitrogen fluxes were measured along 63 stream reaches during winter and summer and paired with simulated groundwater recharge areas to identify and rank potential areas for reduction of nonpoint-source N inputs. New Hydrologic Insights for the Region Reach-scale nitrate-N loads ranged from −39.1–1182 kg-N/yr per 100 m of stream, indicating spatially variable groundwater inputs across seasons. “Reachsheds” — areas contributing groundwater recharge to specific stream reaches — were delineated using a regional groundwater-flow model. Strong correlations were found between observed N loads and land-use characteristics, especially the number of septic systems and total N inputs from the sum of considered sources. Observed N loads were moderately correlated with recharge area size and wastewater flow estimates. Correlating reach-specific groundwater N loads with land use and parcel-scale nitrogen-yield data identified reachsheds with the highest potential for N load reduction. This approach enables targeted implementation of restoration efforts to optimize nutrient management and support regional load reduction.

Massachusetts

Latitudinal gradients of snow contamination in the Rocky Mountains associated with anthropogenic sources

Seasonal snow is an important source of drinking water and recreation, and for agriculture in the Rocky Mountain region. Monitoring snow-water quality can inform on the effects to the albedo and energy balance of the snowpack, and the sources of natural and anthropogenic aerosol and gases. This study analyzed metals in the seasonal snowpack from water year (WY) 2018 for 49 sites. Calcium, lanthanum, and cerium concentrations support the importance of mineral dust to the southern Rocky Mountains. Mercury (Hg), zinc (Zn), and cadmium (Cd) concentrations showed a similar spatial pattern to mineral dust, whereas antimony (Sb) concentrations were highest in the northern Rocky Mountains. To assess the relative contributions from dust versus anthropogenic contaminant sources, enrichment factors (EF) were calculated, with values above 10 indicating anthropogenic contamination. For Cd, Hg, Sb, and Zn, EF values exceeded 10 at northern sites. These observations were compared to spatial trends of EF values of Hg from WY2009 to WY2018, regional monitoring networks, and back trajectory analyses. The agreement between these datasets revealed temporally consistent contaminant sources and/or transport processes to the northern Rocky Mountains snowpack. Sources include current and historical mining and smelting in the region. Strategies to limit the emissions of these metals to the Northern Rockies could benefit from focusing on remediation of contaminated sites, and continued monitoring and mitigation of active mining and smelting.

Colorado , Idaho, Montana, New Mexico, Utah, Wyomi

Dynamic drainage reorganization in Eastern Tibet: Insights from the Yangtze River first bend

The modern drainage network of eastern Tibet is widely believed to have developed through a series of river capture and flow reversal events; however, the timing and mechanisms driving this reorganization remain contentious. Among these events, the river capture that formed the First Bend of the Yangtze River (YFB) stands out as both iconic and particularly debated. Here we present sedimentary provenance data from the Late Miocene–Quaternary Dali Basin, located south of the YFB, which indicate that a southward-flowing Jinsha River (i.e., the present-day upper Yangtze River) sourced sediment to the Dali basin at ∼7.4–6.4 Ma in a drainage configuration different from that of today. Because this interval postdates the initial establishment of a near-modern Jinsha River system prior to the Miocene, our results imply at least two discrete fluvial reorganizations occurred at the YFB—one preceding ∼7.4 Ma and another following ∼6.4 Ma. By integrating these findings with landscape evolution modeling, we infer that the initiation of rapid uplift of the Yulong-Haba Mountains and the Diancang Shan may have been responsible for these drainage reorganizations. These results underscore that Cenozoic drainage systems on the eastern Tibetan Plateau have evolved dynamically on a short timescale of ∼10 5 –10 6 -year, rather than remaining in a long-term stationary configuration on ∼10 7 -year timescales.

eastern Tibetan Plateau, first bend of the Yangtze

A high-resolution 3-D P-wave velocity structure of the south-central Cascadia subduction zone from wide-angle shore-crossing seismic refraction data

This study addresses a significant gap in understanding the features of the south-central Cascadia subduction zone, a region characterized by complex geologic, tectonic, and seismic transitions both offshore and onshore. Unlike other segments along this margin, this area lacks a 3-D velocity model to delineate its structural and geological features on a fine scale. To address this void, we developed a high-resolution 3-D P-wave velocity model using active source seismic data from ship-borne seismic shots recorded on temporary and permanent onshore seismic stations and ocean-bottom seismometers. Our model shows velocity variations across the region with distinct velocity-depth profiles for the Siletz, Franciscan, and Klamath terranes in the overlying plate. We identified seaward dipping high-velocity static backstops associated with the Siletz and Klamath terranes, situated near the shoreline and further inland, respectively. Regions of reduced crustal velocity are associated with crustal faults. Moreover, there is significant along-strike depth variation in the subducting slab, which is about 4 km deeper near the thick, dense Siletz terrane and becomes shallower near the predominantly less-dense Franciscan terrane. This highlights a sudden tectonic and geologic transition at the southern boundary of the Siletz terrane. Our velocity model also indicates slightly increased hydration, though still minimal, in both the oceanic crust and the upper mantle of the subducting plate compared to other parts of the margin.

British Columbia, California, Oregon, Washington

Reconstructing the Quaternary depositional history using geologic mapping and three-dimensional modeling of the subsurface near Fort Morgan, northeastern Colorado

Centered on Fort Morgan, Colorado, this study is intended to build from previous work by adding a three-dimensional (3D) view of the subsurface to better understand the depositional history of Quaternary deposits. A 1:100,000 scale geologic map was made by combining previous geologic maps, regional soil maps, and recent field investigations. In addition to the geologic mapping, drill hole lithologic data from water wells and oil and gas exploration were compiled and lithologic units simplified to best represent the stratigraphy of the Quaternary deposits. From these subsurface data, a 3D subsurface model was constructed, trimmed at the surface by a digital elevation model, and a bedrock surface foundation gridded from drill hole data was added. The surface of the 3D model was then compared visually to the surficial geologic map. Cross sections were constructed from the 3D model and compared to site-specific drilling that was done as part of this project. Finally, the model was examined in detail to reconstruct the depositional history of the subsurface alluvial and eolian units. Alluvial and fluvial drainage basins exposed in the subsurface have a greater areal extent than the present-day narrow drainages. Older eolian sand in the subsurface tends to be interbedded with loess indicating coeval deposition. Holocene sand, both eroded from bedrock exposed at the surface north of the study area and reworked from the South Platte River, buries most of the interbedded older sand and loess.

Colorado

Sand provenance boundary in the Mu Us Sandy Land of northern China

Desert dunes are often assumed to have uniform mineral compositions due to extensive mixing during lateral transport, which complicates provenance studies. The Mu Us Sandy Land in north-central China, near the East Asian summer monsoon precipitation boundary, experiences a wetter climate than most deserts. Climate wetting as a result of a warming climate, and the ‘Sand Control Project’ implemented by the Chinese government to decrease the lateral movement of sand dunes in this area provide an opportunity to study surface processes of sand production and transport. Previous studies using zircon U Pb geochronology and heavy mineral composition indicate distinct sand sources for the Mu Us Sandy Land: local basement-derived middle Yellow River sediments and recycled dried-up lacustrine sediments for the eastern part, and northeastern Tibetan Plateau-derived upper Yellow River sediments for the western part. However, zircons and heavy minerals only represent trace amounts of the bulk mineralogy within a sand dune, so broader provenance analysis targeting common minerals is essential. We focus on the area near the proposed provenance difference boundary between the western and eastern Mu Us Sandy Land, using comprehensive sampling and provenance techniques to confirm distinct provenance characteristics and delineate the provenance boundary. Our findings reveal that sand from most of the Mu Us Sandy Land originated from the erosion of local basement by the middle Yellow River and recycled local dried-up lacustrine sediments, whereas the southwestern corner and the neighboring western-central Chinese Loess Plateau received sediments from the distal northeastern Tibetan Plateau.

Mu Us Sandy Land