Geology ReportsSearch

SEARCH · Geology Reports

Results for “Water Investigation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources

Geophysical Methods for Investigating Ground-Water Recharge

While numerical modeling has revolutionized our understanding of basin-scale hydrologic processes, such models rely almost exclusively on traditional measurements?rainfall, streamflow, and water-table elevations?for calibration and testing. Model calibration provides initial estimates of ground-water recharge. Calibrated models are important yet crude tools for addressing questions about the spatial and temporal distribution of recharge. An inverse approach to recharge estimation is taken of necessity, due to inherent difficulties in making direct measurements of flow across the water table. Difficulties arise because recharging fluxes are typically small, even in humid regions, and because the location of the water table changes with time. Deep water tables in arid and semiarid regions make recharge monitoring especially difficult. Nevertheless, recharge monitoring must advance in order to improve assessments of ground-water recharge. Improved characterization of basin-scale recharge is critical for informed water-resources management. Difficulties in directly measuring recharge have prompted many efforts to develop indirect methods. The mass-balance approach of estimating recharge as the residual of generally much larger terms has persisted despite the use of increasing complex and finely gridded large-scale hydrologic models. Geophysical data pertaining to recharge rates, timing, and patterns have the potential to substantially improve modeling efforts by providing information on boundary conditions, by constraining model inputs, by testing simplifying assumptions, and by identifying the spatial and temporal resolutions needed to predict recharge to a specified tolerance in space and in time. Moreover, under certain conditions, geophysical measurements can yield direct estimates of recharge rates or changes in water storage, largely eliminating the need for indirect measures of recharge. This appendix presents an overview of physically based, geophysical methods that are currently available or under development for recharge monitoring. The material is written primarily for hydrogeologists. Uses of geophysical methods for improving recharge monitoring are explored through brief discussions and case studies. The intent is to indicate how geophysical methods can be used effectively in studying recharge processes and quantifying recharge. As such, the material constructs a framework for matching the strengths of individual geophysical methods with the manners in which they can be applied for hydrologic analyses. The appendix is organized in three sections. First, the key hydrologic parameters necessary to determine the rate, timing, and patterns of recharge are identified. Second, the basic operating principals of the relevant geophysical methods are discussed. Methods are grouped by the physical property that they measure directly. Each measured property is related to one or more of the key hydrologic properties for recharge monitoring. Third, the emerging conceptual framework for applying geophysics to recharge monitoring is presented. Examples of the application of selected geophysical methods to recharge monitoring are presented in nine case studies. These studies illustrate hydrogeophysical applications under a wide range of conditions and measurement scales, which vary from tenths of a meter to hundreds of meters. The case studies include practice-proven as well as emerging applications of geophysical methods to recharge monitoring.

Professional Paper

Using stable isotopes of water and strontium to investigate the hydrology of a natural and a constructed wetland

Wetlands cannot exist without water, but wetland hydrology is difficult to characterize. As a result, compensatory wetland mitigation often only assumes the proper hydrology has been created. In this study, water sources and mass transfer processes in a natural and constructed wetland complex were investigated using isotopes of water and strontium. Water isotope profiles in the saturated zone revealed that the natural wetland and one site in the constructed wetland were primarily fed by ground water; profiles in another constructed wetland site showed recent rain was the predominant source of water in the root zone. Water isotopes in the capillary fringe indicated that the residence time for rain is less in the natural wetland than in the constructed wetland, thus transpiration (an important water sink) was greater in the natural wetland. Strontium isotopes showed a systematic difference between the natural and constructed wetlands that we attribute to the presence or absence of peat. In the peat‐rich natural wetland, δ 87 Sr in the pore water increased along the flowline due to preferential weathering of minerals containing radiogenic Sr in response to elevated Fe concentrations in the water. In the constructed wetland, where peat thickness was thin and Fe concentrations in water were negligible, δ 87 Sr did not increase along the flowline. The source of the peat (on‐site or off‐site derived) applied in the constructed wetland controlled the δ 87 Sr at the top of the profile, but the effects were restricted by strong cation exchange in the underlying fluvial sediments. Based on the results of this study, neither constructed wetland site duplicated the water source and weathering environment of the adjoining natural wetland. Moreover, stable isotopes were shown to be effective tools for investigating wetlands and gaining insight not easily obtained using non‐isotopic techniques. These tools have potential widespread application to wetlands that have distinct isotopic endmember sources.

Ground Water

Investigation of ground-water contamination at a drainage ditch, Installation Restoration Site 4, Naval Air Station Corpus Christi, Corpus Christi, Texas, 2005–06

The U.S. Geological Survey, in cooperation with the Naval Facilities Engineering Command Southeast, used newly developed sampling methods to investigate ground-water contamination by chlorobenzenes beneath a drainage ditch on the southwestern side of Installation Restoration Site 4, Naval Air Station Corpus Christi, Corpus Christi, Texas, during 2005-06. The drainage ditch, which is a potential receptor for ground-water contaminants from Installation Restoration Site 4, intermittently discharges water to Corpus Christi Bay. This report uses data from a new type of pore-water sampler developed for this investigation and other methods to examine the subsurface contamination beneath the drainage ditch. Analysis of ground water from the samplers indicated that chlorobenzenes (maximum detected concentration of 160 micrograms per liter) are present in the ground water beneath the ditch. The concentrations of dissolved oxygen in the samples (less than 0.05-0.4 milligram per liter) showed that the ground water beneath and near the ditch is anaerobic, indicating that substantial chlorobenzene biodegradation in the aquifer beneath the ditch is unlikely. Probable alternative mechanisms of chlorobenzene removal in the ground water beneath the drainage ditch include sorption onto the organic-rich sediment and contaminant depletion by cattails through uptake, sorption, and localized soil aeration.

Texas

Chemical analyses of ground water related to geothermal investigations in the Teton River area, eastern Idaho

Water samples were collected from 31 wells and springs in eastern Idaho and western Wyoming to help evaluate the potential geothermal resources in the Teton River area, Idaho. The water analyses included the common anions and cations, oxygen-18, deuterium, and several minor elements. Actual temperatures of the sampled thermal waters ranged from 23° to 49°C. Estimated aquifer temperatures, as derived from geochemical thermometers, ranged from 45° to 145°C based on silica concentrations and 45° to 205°C based on sodium-potassium-calcium ratios. Using the cation thermometer, two analyses indicated aquifer temperatures that were lower than the actual measured temperatures. Estimated temperatures using a mixing-model method ranged from 205° to 320°C, the higher temperature being of questionable value. The different methods used to estimate aquifer temperatures showed little correlation. On the basis of isotope data, the warm waters may be of local meteoric origin and have not been heated enough to react significantly with the aquifer rocks, or they originated as precipitation at high altitude and great distance from the area.

Idaho

Atmospheric bromine flux from the coastal Abu Dhabi sabkhat: A ground-water mass-balance investigation

A solute mass-balance study of ground water of the 3000 km2 coastal sabkhat (salt flats) of the Emirate of Abu Dhabi, United Arab Emirates, documents an annual bromide loss of approximately 255 metric tons (0.0032 Gmoles), or 85 kg/km2. This value is an order of magnitude greater than previously published direct measurements from the atmosphere over an evaporative environment of a salar in Bolivia. Laboratory evidence, consistent with published reports, suggests that this loss is by vapor transport to the atmosphere. If this bromine flux to the atmosphere is representative of the total earth area of active salt flats then it is a significant, and generally under recognized, input to the global atmospheric bromide flux.

Geophysical Research Letters

Summary of biological and contaminant investigations related to stream water quality and environmental setting in the Upper Colorado River basin, 1938-95

As part of the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) program, an inventory of the biological and contaminant investigations for the Upper Colorado River Basin study unit was conducted. To enhance the sampling design for the biological component of the program, previous studies about the ecology of aquatic organisms and contaminants were compiled from computerized literature searches of biological data bases and by contacting other Federal, State, and local agencies. Biological and contaminant investigations that have been conducted throughout the basin since 1938 were categorized according to four general categories of biological investigations and two categories of contaminant investigations: algal communities, macroinvertebrate communities, fish communities, habitat characterization, contaminants in organism tissue, and contaminants in bed sediment. The studies were identified by their locations in two physiographic provinces, the Southern Rocky Mountains and the Colorado Plateau, and by the predominant land use in the area of the investigation. Studies on algal communities and contaminants in organism tissue and in bed sediment are limited throughout the basin. Studies on macroinvertebrate and fish communities and habitat characterization are the most abundant in the study unit. Natural and human factors can affect biological communities and their composition. Natural factors that affect background water-quality conditions are physiography, climate, geology, and soils. Algae, macroinvertebrates, and fish that are present in the Southern Rocky Mountains and the Colorado Plateau physiographic provinces vary with altitude and physical environment. Green algae and diatoms are predominant in the higher altitude streams, and blue-green, golden-brown, and green algae are predominant in the lower altitude streams. Caddisflies, mayflies, and stoneflies are the dominant macroinvertebrates in the higher altitudes, whereas aquatic worms, leeches, and dragonflies are more common at lower altitudes. Cold-water species, such as trout, are present at the higher altitudes, and warmer water species, such as catfish, carp, and suckers, are predominant at the lower altitudes. Human factors that affect water-quality conditions are mining, urbanization, agriculture, and hydrologic modifications. Mining areas can be depleted of organisms or contain a low diversity of species. Acid-tolerant algae, such as certain species of green algae and diatoms, and metal-tolerant caddisflies can be present in mining areas. Urbanized areas are located in the Southern Rocky Mountains and in the Colorado Plateau and contain species characteristic of the physiographic provinces. Agricultural areas contain species, such as blue-green algae, aquatic worms, suckers, and carp, that can tolerate organic enrichment, sedimentation, and lower concentrations of dissolved oxygen.

Water-Resources Investigations Report

Publications of the U.S. Geological Survey, Water Resources Division, for Puerto Rico and the U.S. Virgin Islands, 1946-1984

A bibliography of water-resources investigations conducted by the U.S. Geological Survey, Water Resources Division in Puerto Rico and the U.S. Virgin Islands was compiled. The bibliography includes an alphabetical listing by author as well as listings by general and specific areas in Puerto Rico and the U.S. Virgin Islands. The publications are also classified by type of report: Open File, Open-File Data Report, KWater-Supply Paper, Water-Resources Investigations, and Professional Paper. (USGS)

Puerto Rico, U.S. Virgin Islands

Geology and water resources of the Spanish Valley area, Grand and San Juan Counties, Utah

This water-resources investigation was initiated in order to provide an estimate of the average annual water yield of the Mill Creek-Pack Creek drainage basin, the parts of that total yield available as surface water and ground water, the amount of ground water that might be recovered for beneficial use, and the effect of this use on the usable ground-water storage within the valley fill in Spanish and Moab Valleys. Detailed information has been sought which is basic to the establishment of sound policies for the development and management of water resources. The investigation was carried out as part of water-resources investigations in Utah with the Utah Division of Water Rights, Department of Natural Resources. Fieldwork was done during the period July 1967-November 1969.

Utah

Hydrogeologic investigation and simulation of ground-water flow in the Upper Floridan Aquifer of north-central Florida and southwestern Georgia and delineation of contributing areas for selected city of Tallahassee, Florida, water-supply wells

A 4-year investigation of the Upper Floridan aquifer and ground-water flow system in Leon County, Florida, and surrounding counties of north-central Florida and southwestern Georgia began in 1990. The purpose of the investigation was to describe the ground-water flow system and to delineate the contributing areas to selected City of Tallahassee, Florida, water-supply wells. The investigation was prompted by the detection of low levels of tetrachloroethylene in ground-water samples collected from several of the city's water-supply wells. Hydrologic data and previous studies indicate that; ground-water flow within the Upper Floridan aquifer can be considered steady-state; the Upper Floridan aquifer is a single water-bearing unit; recharge is from precipitation; and that discharge occurs as spring flow, leakage to rivers, leakage to the Gulf of Mexico, and pumpage. Measured transmissivities of the aquifer ranged from 1,300 ft 2 /d (feet squared per day) to 1,300,000 ft2/d. Steady-state ground-water flow in the Upper Floridan aquifer was simulated using a three-dimensional ground- water flow model. Transmissivities ranging from less than 5,000 ft2/d to greater than 11,000,000 ft 2 /d were required to calibrate to observed conditions. Recharge rates used in the model ranged from 18.0 inches per year in areas where the aquifer was unconfined to less than 2 inches per year in broad areas where the aquifer was confined. Contributing areas to five Tallahassee water-supply wells were simulated by particle- tracking techniques. Particles were seeded in model cells containing pumping wells then tracked backwards in time toward recharge areas. The contributing area for each well was simulated twice, once assuming a porosity of 25 percent and once assuming a porosity of 5 percent. A porosity of 25 percent is considered a reasonable average value for the Upper Floridan aquifer; the 5 percent porosity simulated the movement of ground-water through only solution-enhanced bedding plains and fractures. The contributing areas were generally elliptical in shape, reflecting the influence of the sloping potentiometric surface. The contributing areas delineated for a 5 percent porosity were always much larger than those determined using a 25 percent porosity. The lowest average ground-water velocity computed within a contributing area, using a 25 percent porosity, was 1.0 ft/d (foot per day) and the highest velocity was 1.6 ft/d. The lowest average ground-water velocity, determined using a 5 percent porosity, was 2.4 ft/d and the highest was 7.4 ft/d. The contributing areas for each of the five wells was also determined analytically and compared to the model-derived areas. The upgradient width of the simulated contributing areas were larger than the upgradient width of the analytically determined contributing areas for four of the five wells. The model could more accurately delineate contributing areas because of the ability to simulate wells as partially penetrating and by incorporating complex, three-dimensional aquifer characteristics, which the analytical method could not.

Florida, Georgia

Summary of water-resources activities of the U.S. Geological Survey in Colorado: fiscal year 1984

Water-resources investigations of the U.S. Geological Survey in Colorado consist of collecting water-resources data and conducting interpretive hydrologic investigations. The water-resources data and the results of the investigations are published or released by either the U.S. Geological Survey or by cooperating agencies. This report describes the water- resources investigations in Colorado for the 1984 fiscal year (October 1, 1983, to September 30, 1984).

Colorado

Occurrence, distribution, loads, and yields of selected pesticides in the Little River basin, Kentucky, 2003-04

Water resources in the Little River Basin are potentially vulnerable to applications of pesticides associated with both agricultural and nonagricultural activities, because much of the basin is characterized by karst topography. Concerns about water quality resulting from pesticide use in karst areas and lack of data on concentrations of pesticides in surface water led to further investigation of water quality in the Little River Basin, which includes about 600 square miles in Christian and Trigg Counties and a portion of Caldwell County in western Kentucky. Water samples were collected in streams in the Little River Basin, Kentucky during 2003-04 as part of a study conducted in cooperation with the Kentucky Department of Agriculture. The objectives of the study were to assess the occurrence and distribution of pesticides, to evaluate the spatial and seasonal variability of pesticides, and to evaluate loads and yields of selected pesticides in the basin. A total of 91 water samples was collected at 4 fixed-network sites from March through November 2003 and from February through November 2004. An additional 20 samples were collected at 5 synoptic-network sites within the same period. Twenty-four pesticides were detected of the 127 pesticides analyzed in the stream samples. Of the 24 detected pesticides, 15 were herbicides, 7 were insecticides, and 2 were fungicides. The most commonly detected pesticides-atrazine, simazine, metolachlor, and acetochlor-were those most heavily used on crops during the study. Atrazine and simazine were detected in 100 percent of all surface-water samples, and metolachlor and acetochlor were detected in more than 45 percent. The pesticide degradate, deethylatrazine, was detected in 100 percent of the samples. Only one nonagricultural herbicide, prometon, was detected in more than 50 percent of the samples. Diazinon, the most commonly detected insecticide, was found in 25 percent of all samples and was found at all sites except Casey Creek. Metalaxyl was the most commonly detected fungicide (14 percent); most detections were in samples from the Sinking Fork subbasin. Concentrations of herbicides were highest following application in the spring (March-May). In contrast, insecticides typically were present during the summer (June-August). The most commonly detected pesticides in the Little River Basin were found at low concentrations in streams year-round. Atrazine and simazine (row-crop herbicides) had the highest measured concentrations (22 and 6.1 micrograms per liter (?g/L), respectively) and were the most heavily applied herbicides in the basin. Metolachlor also was heavily applied in the basin, but measured concentrations did not exceed 0.32 ?g/L. The insecticide, Malathion, was only detected in 4 percent of the samples, although it was heavily applied in the basin during 2003-04. Most detections of pesticides were at low concentrations in relation to drinking-water standards and guidelines established for the protection of aquatic life. Only two pesticide compounds--atrazine and simazine--exceeded the U.S. Environmental Protection Agency (USEPA) standards for drinking water. Atrazine exceeded the USEPA's maximum contaminant level (MCL) 19 times in 111 detections; simazine exceeded the established MCL 2 times in 111 detections. These exceedences occurred in the spring. Concentrations of atrazine also exceeded the established aquatic-life criterion (1.8 ?g/L) in 32 samples collected from all sites. Concentrations of deethylatrazine, an herbicide-transformation compound, tended to follow the same monthly concentration pattern as its parent compound (atrazine), but concentrations of deethylatrazine were lower than those of atrazine. Atrazine may have been present in the soil much longer at these sites, which might have allowed microbial populations to transform atrazine into deethylatrazine. A statistical comparison of concentrations of selected pesticides among four fixed-network sites

Scientific Investigations Report

An investigation of shallow ground-water quality near East Fork Poplar Creek, Oak Ridge, Tennessee

Alluvial soils and fill materials in and near the floodplain of East Fork Poplar Creek in Oak Ridge, Tennessee, are contaminated with various trace metals (primarily mercury), organic compounds, and radionuclides that were lost to the stream as a result of past operations at the Y-12 Plant, a nuclear-processing facility located within the U.S. Department of Energy’s Oak Ridge Reservation. Observation wells were installed in the shallow (above bedrock) aquifer in and near the floodplain of East Fork Poplar Creek and water-quality samples were collected to determine if contaminants found in the soils and fill are also present in the shallow ground water. The shallow aquifer in the East Fork Poplar Creek flood plain consists primarily of alluvial silt and clay with lesser amounts of sand and gravel. Thickness of the shallow aquifer ranges from essentially zero to as much as 20 feet. A silty-clay glei horizon is present between the base of the alluvium and the top of bedrock at most flood-plain locations and, where present, likely impedes downward ground-water movement. Water in the shallow aquifer near East Fork Poplar Creek occurs under water-table conditions. Recharge to the shallow aquifer is principally from precipitation, and discharge is through springs and seeps to East Fork Poplar Creek and its tributaries. During spring, summer; and fall, evapotranspiration also accounts for the removal of water in storage in the shallow aquifer. Water levels in the shallow aquifer fluctuate seasonally in response to variations in recharge and evapotranspiration. Generally, the depth to water in the observation wells ranged from about 1 to 4 feet below land surface in late winter, and from about 2 to 7 feet below land surface in late fall. During extremely dry periods, the water table recedes below the top of bedrock in some flood-plain areas, possibly causing East Fork Poplar Creek to lose water to the shallow aquifer along some reaches. Contaminants found in water samples collected from several of the observation wells in concentrations (total and (or) total-recoverable) which equaled or exceeded drinking-water standards established by the U.S. Environmental Protection Agency are antimony, chromium, lead, mercury, selenium, total phenols, and strontium-90. Total and dissolved uranium concentrations exceeded 1.0 microgram per liter in samples from nearly 70 percent of the wells in the East Fork Poplar Creek flood plain. Organic compounds that were identified in low concentrations in samples from a few wells in the flood plain are: Arochlor 1260, benzo(a)anthracene, benzo(b)fluoranthene, chrysene, 3,3-dichlorobenzidine, di-n-butylphthalate, N-nitrosodiphenylamine, and pyrene. Water from one well in the East Fork Poplar Creek flood plain at a contaminated fill site contained 37and 8 micrograms per liter of trichloroethene and trans-1,2-dichloroethene, respectively. Comparison of the results of total and (or) total-recoverable trace-metal determinations with those from dissolved determinations demonstrates that elevated concentrations of these substances in water collected from several of the wells in the East Fork Poplar Creek flood plain resulted from sorption of trace metals (and possibly organic compounds and radionuclides) by fine sediment suspended in the samples. The occurrence of contaminated sediment in these samples is suspected to be the result of borehole contamination during well installation.

Tennessee

Summary of biological investigations relating to surface-water quality in the Kentucky River basin, Kentucky

The Kentucky River basin, an area of approximately 7,000 sq mi, is divided into five hydrologic units that drain parts of three physiographic regions. Data on aquatic biological resources were collected and reviewed to assess conditions in the major streams for which data were available. The North, Middle, and South Forks of the Kentucky River are in the Eastern Coal Field physiographic region. Streams in this region are affected by drainage from coal mines and oil and gas operations, and many support only tolerant biotic stream forms. The Kentucky River from the confluence of the three forks to the Red River, is in the Knobs physiographic region. Oil and gas production operations and point discharges from municipalities have affected many streams in this region. The Red River, a Kentucky Wild River, supported a unique flora and fauna but accelerated sedimentation has eliminated many species of mussels. The Millers Creek drainage is affected by brines discharged from oil and gas operations, and some reaches support only halophilic algae and a few fish. The Kentucky River from the Red River to the Ohio River is in the Bluegrass physiographic region. Heavy sediment loads and sewage effluent from urban centers have limited the aquatic biota in this region. Silver Creek and South Elkhorn Creek have been particularly affected and aquatic communities in these streams are dominated by organisms tolerant of low dissolved oxygen concentrations. Biological data for other streams indicate that habitat and water quality conditions are favorable for most commonly occurring aquatic organisms. (USGS)

Water-Resources Investigations Report

Color photographs for water resources studies

Air-photo interpretation is very well suited to water resources studies where limited observations of hydrologic data must be extended to regional characteristics for large areas. It is also useful in monitoring the hydrologic regimen of an area to detect possible changes. Color aerial photography is generally superior to black-and-white photography for these water resources investigations. Depth penetration through water, and excellent discrimination of water indicators, such as vegetation, are its -main assets. Meaningful interpretation of the photography depends on adequate ground control data. Experiences of the Water Resources Division, U. S. Geological Survey, indicate that the best interpretation is done by professional personnel-engineers, geologists, and water chemists intimately associated with a particular water resources project for which the photography has been obtained.

Photogrammetric Engineering

Methods for collection and analysis of aquatic biological and microbiological samples

The series of chapters on techniques describes methods used by the U.S. Geological Survey for planning and conducting water-resources investigations. The material is arranged under major subject headings called books and is further subdivided into sections and chapters. Book 5 is on laboratory analysis. Section A is on water. The unit of publication, the chapter, is limited to a narrow field of subject matter. "Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples" is the fourth chapter to be published under Section A of Book 5. The chapter number includes the letter of the section. This chapter was prepared by several aquatic biologists and microbiologists of the U.S. Geological Survey to provide accurate and precise methods for the collection and analysis of aquatic biological and microbiological samples. Use of brand, firm, and trade names in this chapter is for identification purposes only and does not constitute endorsement by the U.S. Geological Survey. This chapter supersedes "Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples" edited by P.E. Greeson, T.A. Ehlke, G.A. Irwin, B.W. Lium, and K.V. Slack (U.S. Geological Survey Techniques of Water-Resources Investigations, Book 5, Chapter A4, 1977) and also supersedes "A Supplement to-Methods for Collection and Analysis of Aquatic Biological and Microbiological Samples" by P.E. Greeson (U.S. Geological Survey Techniques of Water-Resources Investigations, Book 5, Chapter A4), Open-File Report 79-1279, 1979.

Techniques of Water-Resources Investigations

Evaluation of three electronic report processing systems for preparing hydrologic reports of the U.S Geological Survey, Water Resources Division

In 1987, the Water Resources Division of the U.S. Geological Survey undertook three pilot projects to evaluate electronic report processing systems as a means to improve the quality and timeliness of reports pertaining to water resources investigations. The three projects selected for study included the use of the following configuration of software and hardware: Ventura Publisher software on an IBM model AT personal computer, PageMaker software on a Macintosh computer, and FrameMaker software on a Sun Microsystems workstation. The following assessment criteria were to be addressed in the pilot studies: The combined use of text, tables, and graphics; analysis of time; ease of learning; compatibility with the existing minicomputer system; and technical limitations. It was considered essential that the camera-ready copy produced be in a format suitable for publication. Visual improvement alone was not a consideration. This report consolidates and summarizes the findings of the electronic report processing pilot projects. Text and table files originating on the existing minicomputer system were successfully transformed to the electronic report processing systems in American Standard Code for Information Interchange (ASCII) format. Graphics prepared using a proprietary graphics software package were transferred to all the electronic report processing software through the use of Computer Graphic Metafiles. Graphics from other sources were entered into the systems by scanning paper images. Comparative analysis of time needed to process text and tables by the electronic report processing systems and by conventional methods indicated that, although more time is invested in creating the original page composition for an electronically processed report , substantial time is saved in producing subsequent reports because the format can be stored and re-used by electronic means as a template. Because of the more compact page layouts, costs of printing the reports were 15% to 25% less than costs of printing the reports prepared by conventional methods. Because the largest report workload in the offices conducting water resources investigations is preparation of Water-Resources Investigations Reports, Open-File Reports, and annual State Data Reports, the pilot studies only involved these projects. (USGS)

Open-File Report