Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Surveys in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources
USGS1987

Index to limnological data for southcentral Alaska Lakes

South-central Alaska lakes are a valuable natural resource and provide a variety of recreational opportunities to the public. Lakeside development has increased significantly in the past 10 years and several south-central Alaskan lakes have documented pollution problems. Cultural eutrophication, the process by which man-induced nutrient loading to a lake results in large increases in biological productivity, can also produce noxious algae blooms, dissolved oxygen depletion at depth, reduced water transparency, and fish kills. The potential for cultural eutrophication of south-central Alaska lakes prompted the U.S. Geological Survey (USGS) Water Resources Division and the Alaska Department of Natural Resources-Division of Geological and Geophysical Surveys (ADGGS) to provide lake researchers, managers, and the public with this index of published historical and current limnological references. The purpose of the index is to provide reference to the data which can be used to identify and monitor cultural eutrophication of south-central Alaska lakes. (Lantz-PTT)

Open-File Report↗
USGS1988

Description and hydrogeologic evaluation of nine hazardous-waste sites in Kansas, 1984-86

Wastes generated at nine hazardous-waste sites in Kansas were disposed in open pits, 55-gal drums, or large storage tanks. These disposal methods have the potential to contaminate groundwater beneath the sites, the soil on the sites, and nearby surface water bodies. Various activities on the nine sites included production of diborane, transformer oil waste, production of soda ash, use of solvents for the manufacture of farm implements, reclamation of solvents and paints, oil-refinery wastes, meat packaging, and the manufacture and cleaning of tanker-truck tanks. Monitoring wells were installed upgradient and downgradient from the potential contamination source on each site. Strict decontamination procedures were followed to prevent cross contamination between well installations. Air-quality surveys were made on each site before other investigative procedures started. Hydrogeologic investigative techniques, such as terrain geophysical surveys, gamma-ray logs, and laboratory permeameter tests, were used. Groundwater level measurements provide data to determine the direction of flow. Groundwater contamination detected under the sites posed the greatest threat to the environment because of possible migration of contaminants by groundwater flow. Concentrations of volatile organic compounds, polynuclear aromatic hydrocarbons, and trace metals were detected in the groundwater at several of the sites. Many of the same compounds detected in the groundwater also were detected in soil and bed-material samples collected onsite or adjacent to the sites. Several contaminants were detected in background samples of groundwater and soil. (USGS)

Water-Resources Investigations Report↗
USGS2020

Hydrogeologic characterization of the Hualapai Plateau on the western Hualapai Indian Reservation, northwestern Arizona

This study was developed to assess if groundwater from the western Hualapai Plateau could be used to supply developments in the Grand Canyon West area of the Hualapai Indian Reservation and to collect hydrogeologic data for future use in a numerical groundwater model for the reservation. Ground-based geophysical surveys; existing well, spring, and other hydrogeologic information from previous studies; and new well and spring data collected for this study were used to provide a better understanding of the hydrogeology of the western Hualapai Plateau. Surface geophysical data provided information on the depth and geologic structure of lower Paleozoic rock units and Proterozoic crystalline and metamorphic rocks that underlie the western Hualapai Plateau. The surface geophysical data and discharge information from springs were used to select a site to drill and develop the U.S. Geological Survey Hualapai Test Well. The Hualapai Test Well was drilled to understand the geophysical properties of geologic formations at depth. These data were used to verify the results of surface geophysical data and to evaluate if sufficient water was present in the Hualapai Test Well for potential groundwater development. The Hualapai Test Well was drilled to a depth of 2,468 feet and bottomed in Proterozoic granite. Water was expected in the lower part of the Muav Limestone, but water was not observed until the Tapeats Sandstone at a depth of 2,400 feet. The Tapeats Sandstone was determined to be confined with a hydrostatic head of over 900 feet. A 48-hour pumping test was conducted to determine aquifer properties. Low specific capacity indicated that although groundwater is present in the Tapeats Sandstone, well yields are likely to be small. A water-quality sample indicated the sample had a calcium, magnesium-bicarbonate water type with a total dissolved-solids concentration of 371 milligrams per liter. Alpha radioactivity of the sample, 18.3 picocuries per liter, exceeded the U.S. Environmental Protection Agency maximum contaminant level of 15 picocuries per liter for drinking water. Concentrations of iron and manganese in the water sample also exceeded the U.S. Environmental Protection Agency secondary maximum contaminant levels for drinking water. An inventory of wells and springs provided insight into the occurrence of groundwater on the western Hualapai Plateau. Data from 56 springs on and adjacent to the western Hualapai Plateau were compiled for this study, and new data were collected at 31 springs. Discharge from springs visited for this study ranged from dry to about 345 gallons per minute. The temporal data from springs, where repeat measurements were available, indicated that spring flow is highly variable and likely related to seasonal and annual precipitation. Water levels from 36 wells on and adjacent to the western Hualapai Plateau were compiled for this study, and new water levels were collected at 5 wells. The spring and well data in conjunction with the Hualapai Test Well results indicated that on the western Hualapai Plateau, bedrock aquifers have limited discrete flow paths that make extensive groundwater development unlikely.

Arizona↗
USGS2014

National Oceanic and Atmospheric Administration hydrographic survey data used in a U.S. Geological Survey regional geologic framework study along the Delmarva Peninsula

The U.S. Geological Survey initiated a research effort in 2014 to define the geologic framework of the Delmarva Peninsula inner continental shelf, which included new data collection and assembly of relevant extant datasets. Between 2006 and 2011, Science Applications International Corporation, under contract to the National Oceanic and Atmospheric Administration National Ocean Service, carried out 23 hydrographic surveys covering more than 4,100 square kilometers of the continental shelf using Reson multibeam echosounders and Klein towed sidescan sonars to update nautical charts along the Delmarva Peninsula. Acoustic backscatter data from these instruments are valuable for characterizing aspects of shallow geologic framework, including seafloor geology, sediment transport pathways, and marine resources. The data cover an area that extends from the entrance of Delaware Bay, Delaware, south to Parramore Island, Virginia, in water depths of about 3 to 35 meters below mean lower low water. Data were collected along lines spaced 40 meters apart, resulting in 40 to 100 percent seafloor coverage for multibeam bathymetry. Processed bathymetric data within the Delmarva Peninsula study area are available through a National Ocean Service interactive map interface, but towed sidescan data products are limited, and multibeam backscatter data products have not been available in the past. The U.S. Geological Survey obtained raw Reson multibeam data files from Science Applications International Corporation and the National Oceanic and Atmospheric Administration for 20 hydrographic surveys and extracted backscatter data using the Fledermaus Geocoder Toolbox from Quality Positioning Service. The backscatter mosaics produced by the U.S. Geological Survey for the inner continental shelf of the Delmarva Peninsula using National Oceanic and Atmospheric Administration data increased regional geophysical surveying efficiency, collaboration among government agencies, and the area over which geologic data can be interpreted by the U.S. Geological Survey. This report describes the methods by which the backscatter data were extracted and processed and includes backscatter mosaics and interpolated bathymetric surfaces.

Delaware, Maryland, Virginia↗
USGS1976

A deep research drill hole at Kilauea Volcano, Hawaii

A 1262-m-deep bore hole was drilled at the summit of Kilauea Volcano, Hawaii, to test predictions based on surface geophysical surveys and to obtain information on the hydrothermal regime above a postulated magma reservoir. Data from the drilling and geophysical borehole logs tend to confirm earlier predictions that a mound of brackish or saline water is present above the inferred magma body. Temperatures within the hydrothermal system are not sufficiently high to indicate deposits of economic interest, but the gradient toward the bottom of the hole (approximately 160 m below sea level) is high, about 370°C per kilometer. The maximum temperature, 137°C, is at the hole bottom.

Hawaii↗
USGS1999

An interpretation of the aeromagnetic and gravity data and derivative maps of the Craig and Dixon Entrance 1°x 3° quadrangles and the western edges of the Ketchikan and Prince Rupert quadrangles, southeastern Alaska

The U.S. Geological Survey (USGS) is required by the Alaska National Interest Lands Conservation Act (ANILCA, Public Law 96-487) to survey certain Federal lands to determine their mineral resource potential. As part of continuing studies designed to fulfill this responsibility, geochemical, geological and geophysical surveys of the Craig and Dixon Entrance (CDE) 1°x3° quadrangles in southeastern Alaska were undertaken by the USGS during the summers of 1983-85, 1989, and 1991. The geochemical data have been reported by Cathrall and others (1993) and Cathrall (1994). A simplified geologic map has been compiled especially for this report based largely on the work of Eberlein and others (1983) and Gehrels (1991, 1992). Brew (1996) also produced a compilation. This report presents available magnetic and gravity data and an interpretation thereof. In this report (released on CD-ROM in 1999) we are releasing USGS-acquired geophysical data for CDE 1:250,000-scale quadrangles of southeastern Alaska. Much of the data have never appeared before in the public domain, including a simplified geologic map, the raw gravity and magnetic data, and derivative products including depth-to-source images, various grids of the data, imaging representations, rock densities, and overlays of the data. In addition, we have added a limited interpretation of what the gravity and magnetic data indicate about the underlying geology, structures, and their relationship to known and potential hidden mineral resources. This interpretation is necessarily limited in the case of the gravity data by the general sparsity of stations. For convenience, we have also included here various representations of the digital topography.

Alaska↗
USGS2015

Sample descriptions and geophysical logs for cored well BP-3-USGS, Great Sand Dunes National Park and Preserve, Alamosa County, Colorado

The BP-3-USGS well was drilled at the southwestern corner of Great Sand Dunes National Park in the San Luis Valley, south-central Colorado, 68 feet (ft, 20.7 meters [m]) southwest of the National Park Service’s boundary-piezometer (BP) well 3. BP-3-USGS is located at latitude 37°43ʹ18.06ʺN. and longitude 105°43ʹ39.30ʺW., at an elevation of 7,549 ft (2,301 m). The well was drilled through poorly consolidated sediments to a depth of 326 ft (99.4 m) in September 2009. Water began flowing from the well after penetrating a clay-rich layer that was first intercepted at a depth of 119 ft (36.3 m). The base of this layer, at an elevation of 7,415 ft (2,260 m) above sea level, likely marks the top of a regional confined aquifer recognized throughout much of the San Luis Valley. Approximately 69 ft (21 m) of core was recovered (about 21 percent), almost exclusively from clay-rich zones. Coarser grained fractions were collected from mud extruded from the core barrel or captured from upwelling drilling fluids. Natural gamma-ray, full waveform sonic, density, neutron, resistivity, spontaneous potential, and induction logs were acquired. The well is now plugged and abandoned. This report presents lithologic descriptions from the well samples and core, along with a compilation and basic data processing of the geophysical logs. The succession of sediments in the well can be generalized into three lithologic packages: (1) mostly sand from the surface to about 77 ft (23.5 m) depth; (2) interbedded sand, silt, and clay, decreasing in overall grain size downward, from 77 to 232 ft (23.5 to 70.7 m) depth; and (3) layers of massive clay alternating with layers of fine sand to silt from 232 to 326 ft (70.7 to 99.4 m), the total depth of the well. The topmost clay layers of the deepest package have a blue tint, prompting a correlation with the “blue clay” of the San Luis Valley that is commonly considered as the top of the confined aquifer. However, a confining clay was intercepted 113 ft (34.4 m) higher than the blue clay in BP-3-USGS. Most of the geophysical logs have good correspondence to the lithologic variations in the well. Exceptions are the gamma-ray log, which is likely affected by naturally occurring radiation from abundant volcanic detritus, and one interval within the deepest lithologic package, which appears to be abnormally electrically conductive. Resistivity logs and variations in sand versus clay content within the well are consistent with electrical resistivity models derived from time-domain electromagnetic geophysical surveys for the area. In particular, the topmost blue clay corresponds to a strong electrical conductor that is prominent in the electromagnetic geophysical data throughout the park and vicinity. BP-3-USGS was sited to test hypotheses developed from geophysical studies and to answer questions about the history and evolution of Pliocene and Pleistocene Lake Alamosa, which is represented by lacustrine deposits sampled by the well. The findings reported here represent a basis from which future studies can answer these questions and address other important scientific questions in the San Luis Valley regarding geologic history and climate change, groundwater hydrology, and geophysical interpretation.

Colorado↗
USGS1983

Aeromagnetic map of the Powderhorn wilderness study area and Cannibal Plateau Roadless Area, Gunnison and Hinsdale counties, Colorado

The Powderhorn Wilderness Study Area (51,000 acres or 20,640 hectares) and the contiguous Cannibal Plateau Roadless Area (29,500 acres or 11,959 hectares) are on the Gunnison County-Hinsdale County boundary, approximately 50mi (80 km) southwest of Gunnison and a few miles east of Lake City, Colo. Part of the area has been known as the Powderhorn Primitive Area. The mineral resource potential of the study area has been assessed by the U.S. Geological Survey and the U.S. Bureau of Mines; this assessment involved, besides the geologic study and economic appraisal (Sharp and others, 1983), a geophysical survey (this report) by the Geological Survey, and a geochemical survey (Sharp and Lane, 1983) by the Geological Survey and the Bureau of Mines.

Colorado↗
USGS2013

Geohydrology, geochemistry, and groundwater simulation (1992-2011) and analysis of potential water-supply management options, 2010-60, of the Langford Basin, California

Groundwater withdrawals began in 1992 from the Langford Basin within the Fort Irwin National Training Center (NTC), California. From April 1992 to December 2010, approximately 12,300 acre-feet of water (averaging about 650 acre-feet per year) has been withdrawn from the basin and transported to the adjacent Irwin Basin. Since withdrawals began, water levels in the basin have declined by as much as 40 feet, and the quality of the groundwater withdrawn from the basin has deteriorated. The U.S. Geological Survey collected geohydrologic data from Langford Basin during 1992–2011 to determine the quantity and quality of groundwater available in the basin. Geophysical surveys, including gravity, seismic refraction, and time-domain electromagnetic induction surveys, were conducted to determine the depth and shape of the basin, to delineate depths to the Quaternary-Tertiary interface, and to map the depth to the water table and changes in water quality. Data were collected from existing wells and test holes, as well as 11 monitor wells that were installed at 5 sites as part of this study. Water-quality samples collected from wells in the basin were used to determine the groundwater chemistry within the basin and to delineate potential sources of poor-quality groundwater. Analysis of stable isotopes of oxygen and hydrogen in groundwater indicates that present-day precipitation is not a major source of recharge to the basin. Tritium and carbon-14 data indicate that most of the basin was recharged prior to 1952, and the groundwater in the basin has an apparent age of 12,500 to 30,000 years. Recharge to the basin, estimated to be less than 50 acre-feet per year, has not been sufficient to replenish the water that is being withdrawn from the basin. A numerical groundwater-flow model was developed for the Langford Basin to better understand the aquifer system used by the Fort Irwin NTC as part of its water supply, and to provide a tool to help manage groundwater resources at the NTC. Measured groundwater-level declines since the initiation of withdrawals (1992–2011) were used to calibrate the groundwater-flow model. The simulated recharge was about 46 acre-feet per year, including approximately 6 acre-feet per year of natural recharge derived from precipitation runoff and as much as 40 acre-feet per year of underflow from the Irwin Basin. Between April 1992 and December 2010, an average of about 650 acre-feet per year of water was withdrawn from the Langford Basin. Groundwater withdrawals in excess of natural recharge resulted in a net loss of 11,670 acre-feet of groundwater storage within the basin for the simulation period. The Fort Irwin NTC is considering various groundwater-management options to address the limited water resources in the Langford Basin. The calibrated Langford Basin groundwater-flow model was used to evaluate the hydrologic effects of four groundwater-withdrawal scenarios being considered by the Fort Irwin NTC over the next 50 years (January 2011 through December 2060). Continuation of the 2010 withdrawal rate in the three existing production wells will result in 70 feet of additional drawdown in the central part of the basin. Redistributing the 2010 withdrawal rate equally to the three existing wells and two proposed new wells in the northern and southern parts of the basin would result in about 10 feet less drawdown in the central part of the basin but about 100 feet of additional drawdown in the new well in the northern part of the basin and about 50 feet of additional drawdown in the new well in the southern part of the basin. Reducing the withdrawals from the three existing production wells in the central part of the basin from about 45,000 acre-feet to about 32,720 acre-feet would result in about 40 feet of additional drawdown in the central basin near the pumping wells, about 25 feet less than if withdrawals were not reduced. The combination of reducing and redistributing the cumulative withdrawals to the three existing and two proposed new wells results in about 40 feet of additional drawdown in the central and southern parts of the basin and about 70 feet in the northern part of the basin. These results show that reducing and redistributing the groundwater withdrawals would maintain the upper aquifer at greater than 50 percent of its predevelopment saturated thickness throughout the groundwater basin. The scenarios simulated for this study demonstrate how the calibrated model can be utilized to evaluate the hydrologic effects of different water-management strategies.

California↗
USGS2003

Hydraulic logging methods - A summary and field demonstration in Conyers, Rockdale County, Georgia

Geophysical surveying techniques provide important information for ground-water investigations (Zohdy and others, 1974; Keys, 1997; Haeni and others, 2001). Subsurface-geophysical methods are used to delineate and characterize hydraulically active zones; the extent of contamination, and contaminant sources; identify geologic features; optimize monitoring well placement; and guide remediation efforts. Borehole-geophysical methods provide information about the physical, chemical, and hydraulic properties of rock, sediments, and fluids in the subsurface and provide important information on subsurface bedrock structures including lithology, rock fabric, location, orientation, and hydraulic properties of fractures (Keys, 1990). Effective use of geophysical data requires that the data be interpreted in the context of known local and regional geology and hydrogeology. In addition, because of the complexity and heterogeneity of crystalline-rock aquifers, a suite of borehole geophysical methods is used to determine the location, extent, and nature of fractures and other structural features in the bedrock aquifer. The geophysical data from each borehole and method are analyzed together to provide an integrated interpretation, thereby reducing the ambiguity that can occur by interpreting each geophysical log individually (Shapiro and others, 1999). Previous work using borehole geophysics to characterize ground-water availability in crystalline rock aquifers includes Chapman and Lane (1996), Mack and others (1998), and Johnson and others (1999). Other investigations that focused on contamination in fractured-rock aquifers used geophysical methods to relate highly transmissive features to structural features in the bedrock (Hansen and Lane, 1995; and Lane and others, 2002).

Georgia↗
USGS2019

Geophysical mapping of plume discharge to surface water at a crude oil spill site: Inversion versus machine learning

The interpretation of geophysical survey results to answer hydrologic, engineering, and geologic questions is critical to diverse problems for management of water, energy, and mineral resources. Although geophysical images provide valuable qualitative insight into subsurface architecture and conditions, translating geophysical images into quantitative information (e.g., saturation, concentration, and hydraulic properties) often involves substantial nonuniqueness and uncertainty owing to the limited resolution of geophysical imaging and uncertainty in petrophysical relations. We have developed a machine-learning approach to address these challenges in the context of a field-based investigation to map zones where a hydrocarbon plume was discharging to surface water at the National Crude Oil Spill Fate and Natural Attenuation Research Site in Bemidji, Minnesota, USA. The two-step approach combines multiple types of geophysical and direct information and effectively bypasses inversion and its associated assumptions. Integrating multifrequency electromagnetic induction, ground-penetrating radar, and fluid-sampling data, we first identify discharge zones and second estimate specific conductance versus depth. Compared with conventional inversion results, the machine-learning results (1) directly address the study objectives (delineating the discharge zones); (2) better extract depth-dependent information from the data, for which sensitivity diminishes rapidly with depth; and (3) quantify the uncertainty of the predictions (i.e., discharge versus nondischarge zones), rather than the uncertainty of the geophysical estimates (i.e., the standard error of estimation for the logarithm of electrical conductivity).

Minnesota↗
USGS2009

Drilling and testing the DOI-04-1A coalbed methane well, Fort Yukon, Alaska

The need for affordable energy sources is acute in rural communities of Alaska where costly diesel fuel must be delivered by barge or plane for power generation. Additionally, the transport, transfer, and storage of fuel pose great difficulty in these regions. Although small-scale energy development in remote Arctic locations presents unique challenges, identifying and developing economic, local sources of energy remains a high priority for state and local government. Many areas in rural Alaska contain widespread coal resources that may contain significant amounts of coalbed methane (CBM) that, when extracted, could be used for power generation. However, in many of these areas, little is known concerning the properties that control CBM occurrence and production, including coal bed geometry, coalbed gas content and saturation, reservoir permeability and pressure, and water chemistry. Therefore, drilling and testing to collect these data are required to accurately assess the viability of CBM as a potential energy source in most locations. In 2004, the U.S. Geological Survey (USGS) and Bureau of Land Management (BLM), in cooperation with the U.S. Department of Energy (DOE), the Alaska Department of Geological and Geophysical Surveys (DGGS), the University of Alaska Fairbanks (UAF), the Doyon Native Corporation, and the village of Fort Yukon, organized and funded the drilling of a well at Fort Yukon, Alaska to test coal beds for CBM developmental potential. Fort Yukon is a town of about 600 people and is composed mostly of Gwich'in Athabascan Native Americans. It is located near the center of the Yukon Flats Basin, approximately 145 mi northeast of Fairbanks.

Alaska↗
USGS2012

Airborne electromagnetic mapping of the base of aquifer in areas of western Nebraska

Airborne geophysical surveys of selected areas of the North and South Platte River valleys of Nebraska, including Lodgepole Creek valley, collected data to map aquifers and bedrock topography and thus improve the understanding of groundwater - surface-water relationships to be used in water-management decisions. Frequency-domain helicopter electromagnetic surveys, using a unique survey flight-line design, collected resistivity data that can be related to lithologic information for refinement of groundwater model inputs. To make the geophysical data useful to multidimensional groundwater models, numerical inversion converted measured data into a depth-dependent subsurface resistivity model. The inverted resistivity model, along with sensitivity analyses and test-hole information, is used to identify hydrogeologic features such as bedrock highs and paleochannels, to improve estimates of groundwater storage. The two- and three-dimensional interpretations provide the groundwater modeler with a high-resolution hydrogeologic framework and a quantitative estimate of framework uncertainty. The new hydrogeologic frameworks improve understanding of the flow-path orientation by refining the location of paleochannels and associated base of aquifer highs. These interpretations provide resource managers high-resolution hydrogeologic frameworks and quantitative estimates of framework uncertainty. The improved base of aquifer configuration represents the hydrogeology at a level of detail not achievable with previously available data.

Nebraska↗
USGS2008

Tectonic and magmatic evolution of the northwestern Basin and Range and its transition to unextended volcanic plateaus: Black Rock Range, Nevada

The seismically active eastern and western margins of the northern Basin and Range have been extensively studied, yet the northwestern margin of the province remains incompletely understood. The Black Rock Range of northwestern Nevada straddles the transition from the Basin and Range province to the south and east, and flat-lying volcanic plateaus to the west. This poorly understood range preserves a remarkably complete record of Cenozoic magmatism and provides an important window into the pre-Miocene history of the unextended volcanic plateaus of northeastern California and southern Oregon. Geologic mapping and 40Ar/39Ar geochronology from the northern Black Rock Range document three significant episodes of Eocene to middle Miocene volcanism. Eocene (35 Ma) basalts directly overlie Mesozoic granites and arc-related volcanic and sedimentary rocks. Locally erupted Oligocene to early Miocene (27-21 Ma) bimodal volcanic rocks comprise the bulk of the Cenozoic section and conformably overlie the Eocene basalt flows. These bimodal units include rhyolitic lavas, variably welded rhyolitic ash flows, unwelded ash-fall deposits, and thin basalt flows. In the neighboring Pine Forest Range ???20 km to the north, similar Oligocene to early Miocene units are overlain by more than 500 m of ca. 16.4 Ma Steens-equivalent basalt flows and are capped by ca. 16 Ma rhyolitic ash-flow tuffs. In the northern Black Rock Range, the ca. 16.4 Ma middle Miocene basalts are absent from the section, and a 16.2 Ma rhyolitic ash-flow tuff directly overlies the early Miocene flows. Basaltic and rhyolitic volcanic products in the northern Black Rock Range span 35-16 Ma, with many of the Oligocene volcanic units derived from local vents and dikes. Despite the map-scale complexities of locally derived lava flows, the Cenozoic section is broadly conformable and dips gently (???5??-10??) to the northwest. The region experienced no significant tilting between 35 and 16 Ma, with moderate tilting (???5??-10??) and concomitant uplift occurring after 16 Ma. This tectonic history is consistent with that of the nearby Pine Forest and Santa Rosa Ranges, where low-temperature thermochronology documents footwall exhumation along the range-bounding normal faults after 12 Ma. The velocity structure of the crust beneath the northern Black Rock Range is constrained by a recent geophysical survey (seismic reflection, refraction, and gravity) and contains gradients that correspond to basin depths predicted by our geologic mapping. Together with recently completed geological and geophysical studies from the surrounding region, our results suggest that the evolution of the northwestern margin of the Basin and Range was characterized by long-lived and voluminous volcanism without significant tectonism, followed by low-magnitude (???20%) extension along high-angle normal faults. ?? 2008 Geological Society of America.

Geological Society of America Bulletin↗
USGS2024

Preliminary ground and airborne-based geophysical mapping and modelling of an active hydrothermal system at Mammoth Lakes, California

Mammoth Lakes, California hosts a productive hydrothermal system within the seismically active south moat of Long Valley Caldera. Surficial evidence of the shallow hydrothermal system includes discrete zones of tree-kill dispersed between Shady Rest Park and the Casa Diablo Geothermal Power Plant (40 MW), as well as east of the power plant. The tree-kill areas are associated with elevated diffuse CO₂ emissions, heated ground, hydrothermal alteration, diffuse soil H₂S emissions, and gas vents. Previous mapping delineates prominent north and northwest trending structures within the south moat along the southwestern edge of the resurgent dome that may accommodate gas and fluid flow at the Shady Rest Park and Basalt Canyon Tree Kill Areas (SRTKA and BCTKA, respectively). Both tree-kill areas are also located along contacts between resurgent rhyolite, mafic lavas, and surficial deposits which may provide additional pathways for gas and fluid migration in the shallow subsurface. Characterizing structure and lithology using geophysical anomalies is critical to determining primary structural controls on the hydrothermal system and the extent of subsurface alteration at these sites. We conducted ground and airborne-based potential field geophysical surveys to map gravity and magnetic anomalies. These anomalies are then used to model subsurface geology, structure, and hydrothermal alteration. Here we present our preliminary geophysical mapping and modelling results at both tree-kill locations. Gravity and magnetic data suggest complex structural intersections are coincident with heated ground and gas emissions at the SRTKA and BCTKA. Hydrothermal systems are often observed or interpreted to exploit fault intersections which can serve as highly permeable pathways for hydrothermal fluid and gas discharge, enabling economic geothermal energy production. Geophysical mapping and modelling are an effective means of investigating such structural complexity at Mammoth Lakes due to the presence of unidentified and concealed structures.

California↗
USGS1976

Basic data from five core holes in the Raft River geothermal area, Cassia County, Idaho

Studies of the geothermal aspect-of the Bridge area of the Raft River basin in south-central Idaho (fig. 1) by the U.S. Geological Survey began in 1972 when Young and Mitchell (1973) made a geochemical and geologic reconnaissance of selected thermal waters in Idaho. The Bridge area had been designated the Frazier known geothermal resource area (Frazier KGRA) by the U.S. Geological Survey (Godwin and others-, 1971) . Since 1972, several units of the Geological Survey have studied the area to provide data for the U.S. Energy Research and Development Administration, which proposes to ascertain whether the geothermal resource can be developed for power generation and other uses. The studies include geologic mapping, geophysical surveys, water sampling, test drilling, and studies of all available drill- hole data. A list of reports already prepared on the area is included with this report. Core drilling of five holes began in August 1974 and was completed in March 1975. These holes are referred to as intermediate-depth core holes, principally because in the spring of 1974, 35 auger holes 25 to 98 feet (7.6 to 30 meters) were completed in the area (Crosthwaite, 1974), and the Aerojet Nuclear Company, under the auspices of the U.S. Energy Research and Development Administration, was planning some deep drilling 4,000 to 6,000 feet (1,200 to 1,800 meters) (fig. 1). The purpose of the core drilling was to provide information to test geophysical interpretations of the subsurface structure and lithology and to provide hydrologic and geologic data on the shallow part of the geothermal system. Samples of the core were made available to several divisions and branches of the Geological Survey and to people and agencies outside the Survey. This report presents the basic data from the core holes that had been collected to September 1, 1975, and includes lithologic and geophysical well logs, chemical analyses of water (table 1), and laboratory analyses of cores (table 2) that were completed as of the above date. The data were collected by the Idaho District office, Hydrologic Laboratory, Borehole Geophysics Research Project, and Drilling, Sampling, and Testing Section, all of the Water Resources Division, and the Branch of Central Environmental Geology of the Geologic Divison.

Idaho↗