Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Water Process Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,711 records · Page 18Linked to original sources
USGS2025

Evolution of permeability and strength recovery of shear fracture under hydrothermal conditions

Geothermal energy is a clean and renewable resource that depends on the ability to move water through hot rock. In many locations, the ability to move water through rock requires the presence of extensive natural or human-made systems of fractures. However, these fracture systems are influenced by a variety of complex processes that occur at the temperature and pressure conditions found in geothermal reservoirs. To make geothermal systems more efficient, it is important to understand how these fractures evolve over time in response to these processes. This study explored how fractures in rock change under high-temperature and pressure conditions, like those found in geothermal reservoirs, through laboratory experiments and numerical simulations. In general fractures, tend to close due to pressure from the surrounding rock preventing the flow of water. One set of laboratory experiments revealed that fractures in granitic rock can weaken over time at elevated temperatures. These weak fractures can then slip slowly potentially keeping the fracture open for a longer period. This study also showed that at the highest temperature examined (250 °C) large differences between the chemical composition of the rock and the fluid moving through it could improve water flow temporarily likely due to the water dissolving parts of the rock. Flow rate predicted by models shows overall good agreement with the flow rate measured in our experiments but with some long time-scale variations that may be due to mechanical wear of the fracture surface. A second set of experiments found that, over the temperature range examined, the closure of fractures was caused by brittle failure driven by high stresses at points where fracture surfaces were in contact. This result suggests that fracture closure in geothermal reservoirs could be counteracted by maintaining high pore pressures. Additionally, we also tested a new method using electrical resistance to measure fracture closure in controlled systems with high precision.

Final Technical Report↗
USGS2024

Thermo-hydrologic processes governing supra-permafrost talik dynamics in discontinuous permafrost near Umiujaq (Québec, Canada)

Widespread supra-permafrost talik formation is currently recognized as a critical mechanism that could accelerate permafrost thaw in the Arctic (e.g., Connon et al. 2018; Farquharson et al. 2022). However, the trajectory of permafrost dynamics following talik formation may prove difficult to predict. Physically-based cryohydrogeologic models provide a powerful tool for understanding processes and factors controlling talik dynamics and, ultimately, how permafrost will respond to climate change. Such models are typically used to represent multiple non-linear processes relevant for groundwater systems in cold regions, such as coupled heat and groundwater movement, including freeze-thaw dynamics and the effects on the surface energy balance and the subsurface thermal and hydraulic properties (Lamontagne-Hallé et al. 2020). Though cryohydrogeologic modeling advances have been made in simulating talik dynamics, few applications have been tested against robust long-term hydrometeorological and subsurface observations.

Quebec↗
USGS2025

Summary of selenium in the lower Gunnison River Basin, Colorado—Information and data gaps

The Cretaceous Mancos Shale is a geologic source of selenium in the lower Gunnison River Basin. Natural weathering processes and human activity mobilize selenium from the Mancos Shale and derived materials, and surface water, groundwater, and sediment all affect the transport of selenium from source areas to receiving streams and biota. Selenium accumulates through the aquatic food chain, and its toxic effects can result in invertebrate mortality and mortality, decreased reproduction, and deformities to fish and birds. The Bureau of Reclamation, in cooperation with the State of Colorado and Gunnison River Basin water users, is implementing a Selenium Management Program to reduce selenium concentrations in the lower Gunnison River Basin of Colorado. Goals of the Selenium Management Program are to (1) achieve compliance with the State of Colorado chronic aquatic-life standard for dissolved selenium (4.6 micrograms per liter) in the Gunnison River near Grand Junction, Colorado; (2) sufficiently improve water-quality conditions to assist in the recovery of endangered species in the Gunnison and Colorado Rivers by reducing selenium concentrations; and (3) support continued water uses in the basin. Many previous studies have contributed to the understanding of selenium in the environment; however, monitoring and research data gaps exist in the lower Gunnison River Basin. The purpose of this report is to summarize information regarding selenium in the lower Gunnison River Basin and describe strategies for scientific research and monitoring to potentially improve understanding of selenium sources; processes affecting the mobilization, transport, and fate of selenium; and the effects of selenium-mitigation projects in the lower Gunnison River Basin. Monitoring and research data gaps discussed in this report include geologic mapping and geochemical source characterization, long-term and ongoing monitoring of the surface-water and groundwater networks, developing and refining statistical models, characterizing selenium on suspended sediment, modeling selenium in the food web, evaluating best management practices, and more.

Colorado↗
USGS2025

A probabilistic assessment methodology for the evaluation of geologic energy storage capacity—Natural gas storage in depleted hydrocarbon reservoirs

The need for energy storage, particularly underground, where capacity and duration may far exceed battery storage technologies, is especially relevant given the increasing demands for reliable power alongside the development of intermittent renewable electricity sources. Geologic energy storage facilities already exist, and expanded use would enable storing gases such as methane and hydrogen. In 2018, a National Academies of Sciences, Engineering, and Medicine report, “Future Directions for the U.S. Geological Survey's Energy Resources Program,” recommended that the U.S. Geological Survey (USGS) prioritize assessing underground energy storage in geologic formations in the United States. The U.S. Geological Survey has since developed a methodology for assessing natural gas storage capacities in depleted hydrocarbon reservoirs on a national scale. The methodology introduced in this report prescribes three approaches for calculating gas storage capacity. This methodology relies on the availability of input data, including cumulative hydrocarbon production records, reservoir petrophysical properties, and reservoir pressure data. Assessment inputs can be obtained from public, State-level databases and propriety national-scale databases, although the use of analogs could be warranted for estimating input parameters. Probabilistic assessment results are aggregated to play, petroleum province, regional, and national scales. The steps defined in this report are demonstrated on the Michigan Basin Province, which includes the Mississippian Sandstone Gas Play and the Clinton Structural Play. This methodology could be used to systematically and consistently assess hydrocarbon plays and provinces for natural gas storage capacity across the United States.

Michigan↗
USGS2025

Mineralization processes at Escanaba Trough

Escanaba Trough off northern California is the southernmost and only sediment covered segment of the Gorda Ridge. Hydrothermal mineralization was first discovered in Escanaba Trough in 1985, and subsequent investigations included the delineation of the NESCA (northern Escanaba) and SESCA (southern Escanaba) sections of Escanaba Trough, as well as drilling by Ocean Drilling Program (ODP) Leg 169 in 1996. Preliminary research conducted in the 1980s distinguished two classes of sulfide mineral assemblages within the Escanaba Trough: one dominated by pyrrhotite (Fe 1-x S) and one containing ‘mixed sulfides’ including chalcopyrite (CuFeS 2 ) and sphalerite (ZnS). In 2022, we conducted a research expedition to the Escanaba Trough to more thoroughly characterize mineralization processes and consider preservation of precipitated minerals throughout hydrothermally active and inactive sections of Escanaba Trough, with the specific objective of characterizing the host minerals, and processes of enrichment for specific elements which are currently listed as critical elements and can also be toxic under certain conditions (Sb, As, Ba, Co, Ga, Ge, Te). The following will include initial results from that work.

California↗
USGS2025

Rupture process of the Mw7.0 December 5, 2024 Offshore Cape Mendocino earthquake

The Mw7.0 December 5, 2024 Offshore Cape Mendocino earthquake ruptured a km long portion of the east-west trending Mendocino fault zone (MFZ). In order to clarify the rupture process, we assemble three-component seismograms from regional seismic stations, horizontal coseismic displacement vectors derived from Global Navigation Satellite System (GNSS) time series, and a Sentinel-1 ascending interferogram. These data are interpreted with a model of slip distributed on two vertical fault planes representative of the eastern MFZ and spanning the ~70 km length of the aftershock zone. Assuming right-lateral strike slip, we find that the rupture initiates in the oceanic mantle at 20-30 km depth and proceeds unilaterally updip and toward the east. Early aftershocks locate adjacent to the peak slip areas, tracking the coseismic rupture propagation from oceanic mantle to shallower depth and implying a significant role of static stress transfer in driving aftershocks in an ocean plate environment.

California↗
USGS2025

Estimation of the accessible and useful resource base for electric-grade enhanced geothermal systems (EGS) resources of the Great Basin, USA

Scientists with the U.S. Geological Survey (USGS) recently completed a provisional assessment of the electric-grade geothermal resources associated with the low-permeability geologic formations of the Great Basin, USA, where resources are assumed to be accessible using enhanced geothermal systems (EGS) technologies (i.e., the engineering of sufficient permeability to facilitate efficient heat extraction). This assessment required estimation of the accessible resource base (electric-grade heat [>90ºC] at depths where drilling and stimulation are deemed achievable using current technology) and useful resource (heat that can be extracted from the accessible region). Electric-grade heat can be estimated from existing temperature models. The accessible resource base can be estimated as the electric-grade heat that exists at depths shallower than 6 km based on the limitations of current drilling and stimulation technologies, along with evidence for sustained natural fracture conductivity at depth. The useful part of the accessible heat can be estimated as the product of three efficiencies and factors: the heat extraction efficiency, the viable geology factor, and the reservoir spacing efficiency. The accessible and useful parts of the resource can be estimated in units of heat, or in units of electric power using an electrical conversion efficiency, which is a function of resource temperature. We also estimate the ranges for each of the efficiencies and describe the motivations behind the choice of best estimates used for the recent assessment. An analytic solution is provided for the useful resource above any depth (in units of electric power), where efficiency estimation assumes nearly steady heat extraction rates that cool reservoirs to 90ºC over 30 years of power generation.

Great Basin↗
USGS2025

Geochemistry and thermometry of magnetite veins and replacements in iron ore deposits from the Iron Springs district, SW Utah, USA: Relation to magmatic and hydrothermal processes

Ore-genesis, texture, chemical compositions, and thermometry of magnetite were used to better evaluate the origins of iron ore deposits across the Iron Spring district, Utah. Trace element compositions, determined by LA-ICP-MS, were used to calculate temperatures based on X Mg numbers and characterize the trace element signatures of magmatic and hydrothermal magnetite. Magnetite occurs as coarser crystalline grains within veins, breccias, and cavities along with finer crystalline replacements. Magnetite is most commonly intergrown with apatite, phlogopite, and carbonate in veins, breccias, and cavities where apatite occurs separately from the other gangue minerals. The results using empirical trace element discrimination diagrams generally suggest that the magnetite is overall of hydrothermal origin regardless of textural variations or field relationships. The X Mg numbers of the magnetite in the magnetite-apatite ores, however, are suggestive of high temperature magmatic conditions; whereas those of vein, breccia, and replacement occurrences containing other gangue minerals are suggestive of lower temperature hydrothermal processes.

Utah↗
USGS2024

Effects of stochastically-simulated near-fault ground motions on soil liquefaction

The scarcity of historically recorded near-fault ground motions poses a challenge to systematically understanding the influence of near-fault effects on various types of seismic demands for engineering purposes. In particular, the current state of knowledge of the influence of ground-shaking intensity on soil liquefaction and its consequences does not specifically account for the effects of near-fault ground motion characteristics. In this study, the influence of near-fault ground motions on liquefaction triggering and lateral spreading are investigated using non-linear modeling of a hypothetical liquefiable soil column in the finite-element computational platform OpenSees subjected to simulated ground motion time series that represent strong earthquake shaking in the near field. The simulated ground motion time series and resulting datasets are based on a parametric stochastic model and are developed for a range of source and path parameters to represent a realistic variability of ground motion characteristics. Dependencies between ground motion intensity measures (IMs) and liquefaction demand parameters are investigated for near-fault pulse and nonpulse-like ground motion sets. Evolutionary IMs, such as cumulative absolute velocity (CAV) and the time-varying magnitude-adjusted peak ground acceleration (PGAM), are considered in developing liquefaction triggering probability density functions. Post-liquefaction triggering responses such as lateral spreading displacements are examined in relation to PGA M and CAV. The ground motion simulations are validated by comparing their liquefaction-capacity PGA M fragilities and post-triggering CAV vulnerability relationships to historical records from the 1994 Northridge earthquake in California, USA. Finally, a path forward for future studies that includes finding systematic differences in the IM-liquefaction demand relationships between near-fault and far-field stochastic ground motion sets is outlined.

Conference Paper↗
USGS2026

High‐resolution surface deformation and slip distribution observations for the 2023 Kahramanmaraş, Türkiye, earthquake sequence help constrain the rupture process

Splay, or branch, faults are a common geometric feature of earthquake surface ruptures and may provide constraints on the rupture behavior of an earthquake. The 2023 M w 7.8 Pazarcık and M w 7.5 Elbistan, Türkiye, earthquakes are examples of ruptures with multiple small splays, and the Pazarcık earthquake nucleated on a splay fault, the Narlı fault, before rupturing bilaterally on the East Anatolian fault (EAF). Here, we present 3‐m‐resolution surface displacement from subpixel correlation of Planet Dove optical images for the entirety of both ruptures with corresponding surface slip distributions. For a 30‐km‐long study region spanning the Narlı‐EAF intersection, we compare surface slip derived from five data sets with different resolutions (on‐the‐ground, WorldView, Planet Dove, Sentinel‐2, and Sentinel‐1) to elucidate complementary information. In addition, we integrate information from the surface expression of faulting with published dynamic rupture simulations and rupture process studies to constrain a rupture evolution for the Pazarcık earthquake that is consistent across data sets. This work highlights the complementary nature of disparate surface slip data sets and the role that high‐resolution surface displacement information, including from fault splays, can play in constraining nonunique rupture models and refining understanding of the earthquake rupture process.

Bulletin of the Seismological Society of America↗
USGS2024

The spatially adaptable filter for error reduction (SAFER) process: Remote sensing-based LANDFIRE disturbance mapping updates

LANDFIRE (LF) has been producing periodic spatially explicit vegetation change maps (i.e., LF disturbance products) across the entire United States since 1999 at a 30 m spatial resolution. These disturbance products include data products produced by various fire programs, field-mapped vegetation and fuel treatment activity (i.e., events) submissions from various agencies, and disturbances detected by the U.S. Geological Survey Earth Resources Observation and Science (EROS)-based Remote Sensing of Landscape Change (RSLC) process. The RSLC process applies a bi-temporal change detection algorithm to Landsat satellite-based seasonal composites to generate the interim disturbances that are subsequently reviewed by analysts to reduce omission and commission errors before ingestion them into LF’s disturbance products. The latency of the disturbance product is contingent on timely data availability and analyst review. This work describes the development and integration of the Spatially Adaptable Filter for Error Reduction (SAFER) process and other error and latency reduction improvements to the RSLC process. SAFER is a random forest-based supervised classifier and uses predictor variables that are derived from multiple years of pre- and post-disturbance Landsat band observations. Predictor variables include reflectance, indices, and spatial contextual information. Spatial contextual information that is unique to each contiguous disturbance region is parameterized as Z scores using differential observations of the disturbed regions with its undisturbed neighbors. The SAFER process was prototyped for inclusion in the RSLC process over five regions within the conterminous United States (CONUS) and regional model performance, evaluated using 2016 data. Results show that the inclusion of the SAFER process increased the accuracies of the interim disturbance detections and thus has potential to reduce the time needed for analyst review. LF does not track the time taken by each analyst for each tile, and hence, the relative effort saved was parameterized as the percentage of 30 m pixels that are correctly classified in the SAFER outputs to the total number of pixels that are incorrectly classified in the interim disturbance and are presented. The SAFER prototype outputs showed that the relative analysts’ effort saved could be over 95%. The regional model performance evaluation showed that SAFER’s performance depended on the nature of disturbances and availability of cloud-free images relative to the time of disturbances. The accuracy estimates for CONUS were inferred by comparing the 2017 SAFER outputs to the 2017 analyst-reviewed data. As expected, the SAFER outputs had higher accuracies compared to the interim disturbances, and CONUS-wide relative effort saved was over 92%. The regional variation in the accuracies and effort saved are discussed in relation to the vegetation and disturbance type in each region. SAFER is now operationally integrated into the RSLC process, and LANDFIRE is well poised for annual updates, contingent on the availability of data.

Fire↗
USGS2024

Developing international standards and guidelines for disseminating and validating simulated ground motions

We are leading an effort to develop international standards and guidelines for curating, disseminating, and validating simulated ground-motion data. This effort is organized as a working group within the Consortium of Organizations for Strong Motion Observation Systems (COSMOS). In 2022 we held online workshops on 7 and 8 June and 20 October. The first workshop focused on curating and disseminating simulated ground-motion data. The second workshop focused on validating simulated ground-motions for engineering applications. About 100 people participated in each of the workshops with strong representation from North America, Europe, and western Asia. In the coming year, we intend to form a technical committee to draft the international guidelines and standards while continuing to engage stakeholders from across the globe through online and in-person meetings. The key points from the workshops include: (1) Numerous groups are generating simulated earthquake ground motions and making them openly available; however there is very little coordination among groups to provide consistent interfaces for searching and retrieving data; (2) Standardizing interfaces for metadata and data access should consider agile approaches that can adapt to changing capabilities and user needs while building upon existing efforts; (3) A distributed architecture is preferred by most participants to allow institutions to host and manage their own data while broadcasting their holdings to a combined catalog; (4) Validation of ground-motion simulations applies to the entire workflow for simulating earthquake ground-motions, including the rupture model, seismic velocity model, and seismic wave propagation software; (5) Metrics to evaluate the validation are application dependent; more research is needed to tie structural response characteristics to ground-motion characteristics; and (6) Validation results should provide a clear, transparent, and quantitative assessment of the simulated ground motions.

Conference Paper↗
USGS2025

Wet meadow regeneration through restoration of biophysical feedbacks

Wet meadows are globally significant ecosystems that provide critical hydrological, ecological, and biogeochemical functions, yet their extent has declined dramatically due to land use changes and hydrologic alteration. These sedge-dominated wetlands exist at the drier end of the wetland gradient, maintained by shallow groundwater and periodic inundation. This paper is a global synthesis of the ecological, geomorphic, and hydrological dynamics of wet meadows, with an emphasis on alluvial systems, to inform effective restoration strategies. We compare wet meadows to other wetlands, classify them into palustrine, lacustrine, and alluvial types, then focus on alluvial wet meadows and discuss how their formation and persistence depend on ground and surface water interactions, sediment deposition and flow obstructions, all mediated by biological processes. In particular, we highlight the role of hydric graminoids in resisting erosion and maintaining soil cohesion, how beaver promote meadow persistence, and the significance of wet meadows as carbon sinks. We also present stratigraphic evidence demonstrating that incision, often triggered by anthropogenic activity or changing climate, is the primary mechanism of alluvial wet meadow degradation, resulting in water table decline and shifts in vegetation composition. Restoration requires reversing these incisional processes through techniques that elevate water tables, disperse flow and retain sediment—methods traditionally associated with either soil conservation or stream restoration. These include nature-based solutions that create obstructions such as beaver dams and their analogues, rock and wood-based obstructions and incision trench or gully filling and grading. Given their multifunctional value—including but not limited to flood attenuation, biodiversity support, and carbon sequestration—wet meadows warrant a focused restoration framework. This review advocates for a valley-floor scale restoration paradigm that integrates hydrological reconnection, sediment retention, and biological reinforcement to ensure long-term resilience of these systems in the face of changing climate and land use pressures.

Frontiers in Environmental Science↗
USGS2026

Towards a refined definition of “tidal influence” for the coastal wetland sciences

The astronomical tide relates to lunar (and to a lesser extent solar) influences on rising and falling water bodies, and is a key control of many coastal processes. However, tides manifest along coastal margins in different ways to muddle application beyond Sir Isaac Newton’s first descriptions. Here, we argue that tide, or specifically “tidal,” has not been adequately defined for the coastal wetland sciences to facilitate contemporary interdisciplinary distinction for rapidly changing coastlines and future climate adaptation planning. We provide a brief history of the tidal concept, and we describe tides in a diversity of uncommonly recognized marginal coastal environments. Common astronomical tide manifestations are described through hydrographic examples, then expanded to include those tidal environments exposed additionally to fluvial, meteorological (wind), or groundwater influences. Our expanded definition of “tidal” is intended to be a forward-looking construct as environments will inevitably change with sea-level rise, water extraction, and anthropogenic flow alteration. Our definition of wetland tidal influence, which we broaden, includes those “wetlands affected by astronomic water level fluctuations within coastally restricted environments causing frequent or infrequent surface inundation or groundwater tidal variation that affects the biogeochemistry of the soil (e.g., ion exchange capacity, oxygen state, mineralization processes)”. Astronomic water level fluctuations are often amplified or dampened by non-astronomical events, such as wind. Expanding the definition of what is considered tidal by the scientific community is critical for improved understanding of coastal wetland function and the suite of ecosystem services they provide people and society, including climate mitigation opportunity, management, and adaptation.

Wetlands↗
USGS2025

Preserving and increasing water resources—Natural infrastructure in dryland streams in Baja California Sur, Mexico

The Los Planes watershed of Baja California Sur, Mexico, and its underlying aquifer are experiencing groundwater decline owing to low average annual rainfall (28.1 centimeters per year) and rising water demand from population growth and agricultural activities. This decline in water availability can lead to desertification—a process that changes arable land to desert by degrading soil and vegetation—and can pose serious challenges to livelihoods that depend on the land. To address these issues, a ranch in the Los Planes watershed has installed many natural infrastructures in dryland streams (NIDS) in channels for soil and water conservation. In 2022, the U.S. Geological Survey (USGS) began working with regional researchers and land managers to investigate the effects of NIDS on natural biological, geochemical, and physical processes and determine the efficacy of NIDS for water augmentation in the Los Planes watershed. The USGS also worked with local academic institutions and nonprofit organizations to create public educational opportunities focused on the area’s hydrogeology. These and other collaborative efforts with the U.S. Water Partnership and Innovaciones Alumbra aim at enhancing water resources in the Baja California Sur region and promoting water security and safeguarding community well-being. Resume La cuenca de Los Planes, ubicada en Baja California Sur, México, y su acuífero subyacente, están sufriendo una disminución de las aguas subterráneas debido a la baja precipitación media anual (28.1 centímetros por año) y la alta demanda de agua por parte de una población creciente y la actividad agrícola. Esta disminución de la disponibilidad de agua puede conducir a la desertificación—un proceso que por medio de la degradación del suelo y la vegetación convierte a la tierra cultivable en desierto—representando un serio desafío para los medios de vida de las personas. Para abordar estos problemas, un rancho en la cuenca de Los Planes ha instalado numerosas obras de Infraestructura Natural en Arroyos de Tierras Áridas (INATS) para conservación del suelo y del agua. En 2022, el Servicio Geológico de los Estados Unidos (USGS, por sus siglas en inglés) comenzó a trabajar con investigadores regionales y gestores de tierras para estudiar los efectos de INATS en los procesos biológicos, geoquímicos y físicos, y determinar su eficacia en el aumento de los recursos hídricos en la cuenca de Los Planes. El USGS se ha asociado con instituciones académicas y organizaciones locales sin fines de lucro para crear oportunidades educativas públicas centradas en la hidrogeología de la zona. Estos y otros esfuerzos colaborativos con la Asociación del Agua de Estados Unidos (U.S. Water Partnership) e Innovaciones Alumbra, tienen como objetivo mejorar el uso de los recursos hídricos en la región de Baja California Sur, promover la seguridad hídrica y proteger el bienestar de la comunidad.

Baja California Sur↗
USGS2024

Metal mobilization from thawing permafrost to aquatic ecosystems is driving rusting of Arctic streams

Climate change in the Arctic is altering watershed hydrologic processes and biogeochemistry. Here, we present an emergent threat to Arctic watersheds based on observations from 75 streams in Alaska’s Brooks Range that recently turned orange, reflecting increased loading of iron and toxic metals. Using remote sensing, we constrain the timing of stream discoloration to the last 10 years, a period of rapid warming and snowfall, suggesting impairment is likely due to permafrost thaw. Thawing permafrost can foster chemical weathering of minerals, microbial reduction of soil iron, and groundwater transport of metals to streams. Compared to clear reference streams, orange streams have lower pH, higher turbidity, and higher sulfate, iron, and trace metal concentrations, supporting sulfide mineral weathering as a primary mobilization process. Stream discoloration was associated with dramatic declines in macroinvertebrate diversity and fish abundance. These findings have considerable implications for drinking water supplies and subsistence fisheries in rural Alaska.

Alaska↗
USGS2026

The role of groundwater in contributing to surface water salinization in the Upper Colorado River Basin

Freshwater salinization impacts the availability of water for human use and ecosystem needs worldwide. It has been estimated that total dissolved solids (TDS) in the Colorado River Basin cause $350 million/year in damages and substantial resources are devoted to reducing TDS loading to streams. This study describes the development and application of coupled watershed models that enable TDS source tracking through the subsurface and across the landscape at a seasonal timestep for 35 years in the Upper Colorado River Basin. Results indicate that, on average, 75% of TDS loading to streams originates as baseflow, and 50% of loading is lagged in delivery by longer than one season. Snowmelt was identified as a dominant process controlling the transport of lagged TDS to streams. This approach informs when and where TDS mitigation efforts may be effective in a watershed that serves as a critical water supply for the southwestern United States.

Arizona, Colorado, New Mexico, Utah, Wyoming↗
USGS2025

PFAS sampling activities in the U.S. Geological Survey national networks

Per- and polyfluoroalkyl substances (PFAS), frequently called “forever chemicals,” are used for a wide variety of industrial purposes and are often found in common household and industrial items such as firefighting foams, non-stick cookware, and water-resistant materials. The contamination of water, air, and soil by PFAS is a national and global issue due to their widespread occurrence in multiple applications and resistance to biodegradation and other traditional treatment processes. Research indicates that many PFAS can be emitted to the atmosphere and transported and deposited long distances from the source. The U.S. Geological Survey (USGS) Water Resources Mission Area received funding to implement a national-scale sampling effort to assess PFAS occurrence. To follow agency directives, the National Water Quality Network (NWQN) added PFAS sample monitoring for both surface water and groundwater, and also added PFAS monitoring to selected sites in the National Atmospheric Deposition Program (NADP).

General Information Product↗