Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of North American Bat Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 18Linked to original sources
USGS2026

Tectonically driven integration of the 4.8 Ma Colorado River USA tracked with detrital sanidine and fish genetics

The development of the continental-scale Colorado River system, western USA, from 8 to 4.8 Ma, is revealed using 60-40 Ma detrital sanidine tracer grains and fish phylogeny. Here we show that precursor paleoriver segments became integrated north to south as traced by 60-40 Ma sand grains that were derived from the north and sequentially appeared in the 25-8 Ma Browns Park Formation of Utah, 7-6 Ma upper Bidahochi Formation of Arizona, and 4.8 Ma Bouse Formation of the lower Colorado River and proto Gulf of California. This timing is mimicked by molecular clock estimates of divergence times among fish lineages. River integration was a response to headwater uplifts in the Yellowstone hotspot track and Rocky Mountains. 40 Ar/ 39 Ar ages refine the timing for mantle-drips that caused subsidence, then uplift, of depositional basins that influenced the integration pathway and tempo. The ~ 3-million-year timescale suggests that multiscale mantle-driven uplift, rather than lake spillover, was the primary driver for integration of the proto-Colorado River through Grand Canyon.

Colorado River↗
USGS2026

Determining Volcanic Risk in Auckland (DEVORA) Research Programme—A transdisciplinary approach to address the challenge of distributed volcanism in an urban environment

The Determining Volcanic Risk in Auckland (DEVORA) Research Programme was launched in 2008 to address the challenges associated with monogenetic volcanism in an urban setting and to enhance volcanic risk management in Tāmaki Makaurau Auckland in Aotearoa New Zealand. It is a multi-agency, increasingly transdisciplinary (defined here as research that transcends traditional disciplinary boundaries by integrating diverse types of knowledge, perspectives, and methods from academic and non-academic participants to create novel solutions to complex problems), and collaborative research program jointly led by Waipapa Taumata Rau University of Auckland and Earth Sciences New Zealand (ESNZ; formerly GNS Science), with core funding from Natural Hazards Commission Toka Tū Ake (NHC; formerly the Earthquake Commission, EQC) and Te Kaunihera o Tāmaki Makaurau Auckland Council (AC). The primary research focus of DEVORA is to investigate the geologic history, volcanic hazards, and risk posed by the basaltic intraplate Auckland Volcanic Field. Disruption from ash fall and gas from other Aotearoa New Zealand volcanoes is also considered. DEVORA’s work to explore exposure and vulnerability in Tāmaki Makaurau Auckland is also useful for assessing risks from other non-volcanic natural hazards, such as seismic and tsunami hazards. The greater Tāmaki Makaurau Auckland region has an ethnically and socio-economically diverse population of approximately 1.7 million, representing about one-third of the Aotearoa New Zealand population, and hosts critical infrastructure of national significance. The size and nature of the populace, consequential economic base, and important infrastructure within Tāmaki Makaurau Auckland mean that the effects of a volcanic eruption would be felt nationally, including through the disruption of air travel to Aotearoa New Zealand. The hazards from such an eruption could potentially affect hundreds of thousands of people, businesses, and lifelines (critical infrastructure). A considerable challenge for emergency and risk managers is the monogenetic nature of the volcanic field. It is not known where or when the next eruption will occur, how much warning we may get before an eruption, nor how an eruption and its effects might unfold. In this contribution, we highlight the concept and collaborative intent of the DEVORA Programme and show how it has evolved over the 16 years since its inception. We describe how DEVORA has unified more than 100 researchers (including more than 50 graduate students) and numerous stakeholders to address key issues facing Tāmaki Makaurau Auckland and describe how research findings are being implemented into policy and communicated to stakeholder agencies and the public. We also illustrate the broader influence of the DEVORA Programme and provide some learnings that might benefit others embarking on similar integrated projects, especially those focused on distributed volcanism in and near populated areas.

Auckland↗
USGS2026

Evidence for organic and igneous carbon sources in the Mesoproterozoic Adirondack Highlands graphite district, New York

This study examined the origin of graphite mineralization in the Mesoproterozoic Adirondack Highlands. Flake graphite was mined from the historic mining district around Ticonderoga, New York, USA, from the 1850s to the 1920s. Most of the production and reserves from the district are disseminated graphite from feldspathic quartz schists (e.g., Dixon-American Graphite Co. mine, Faxon property, Flake Graphite Company). Protolith sediments of the schists were deposited in the Trans-Adirondack backarc basin at ca. 1.25 Ga and were metamorphosed to high grade at 1.18–1.15 Ga during the accretionary Shawinigan orogeny and at 1.09–1.02 Ga during the Ottawan phase of the Grenvillian orogeny. Major elements and carbon isotopes of graphite from schists (δ 13 C = −28.1‰ to −5.4‰ relative to Vienna Peedee belemnite) are consistent with derivation from organic carbon in protolith sandstones that devolatilized during metamorphism. Some small mines and prospects in the district mined graphitic calcite marbles and clinopyroxene ± scapolite skarns associated with a pegmatite suite dated by U-Pb in zircon to 1.04–1.01 Ga (e.g., Lead Hill and Crown Point deposits), and rare graphite veins are observed at several deposits. Hydrothermal flake graphite from pegmatites, skarns, and veins are distinct from graphite in schist-hosted deposits and have δ 13 C values that cluster around −7‰ to −5‰, consistent with deposition from igneous CO 2 . Covariation of carbon and oxygen stable isotopes and U-Pb zircon geochronology are not compatible with precipitation from fluids derived from country rock metapelites or marbles. Some graphite districts elsewhere show compelling evidence for remobilization and redeposition of sedimentary-derived carbon as hydrothermal graphite, sometimes as thick veins producing world-class, high-grade deposits. In the Adirondacks, there is evidence for two generations of graphite mineralization with distinct carbon sources: syngenetic graphite with an organic origin in Shawinigan quartz schists and epigenetic graphite with an igneous origin in Ottawan skarns and pegmatites.

New York↗
USGS2024

Simulation of groundwater flow in the Long Island, New York regional aquifer system for pumping and recharge conditions from 1900 to 2019

The U.S. Geological Survey has developed a transient, groundwater-flow model that simulates hydrologic conditions in the Long Island aquifer system as part of an ongoing (since 2016) multiyear, cooperative investigation with the New York State Department of Environmental Conservation. The goals of this investigation are to assist stakeholders and resource managers to evaluate the response of the hydrologic system to changes in future hydraulic stresses. Responses in the hydrologic system include changes in water levels in the hydrogeologic units; discharge to streams, coastal waters, and subsurface infrastructure; and the extent of saline groundwater in the aquifers. Hydraulic stresses include future water-supply management and changes in land use and infrastructure. The numerical model synthesizes a diverse set of physiographic, geologic, climatic, land-use, and historical population, water use, and infrastructure data to physically represent the Long Island aquifer system from land surface to bedrock and to simulate annual hydrologic conditions between 1900 and 2019. A three-dimensional hydrogeologic framework was developed from existing and recently collected borehole geologic and geophysical data collected as part of a companion drilling program. Water-transmitting properties of the principal aquifer sediments were defined in three dimensions from new and existing lithologic logs. The distribution of recharge from precipitation was estimated from landscape characteristics and climate data. Anthropogenic recharge from wastewater, leaky infrastructure, and storm runoff were estimated from population, infrastructure, and pumping data. Water-use data, including well locations, depths, and pumping rates, were obtained from historical sources and records and used to estimate pumping stresses continuously in time and space, at an annual average time scale. The data were incorporated into a three-dimensional numerical model using the U.S. Geological Survey finite difference modeling code MODFLOW 6; the model encompassed all of Long Island and surrounding surface waters and simulated historical hydrologic conditions from 1900 to 2019. The calibration process involved trial and error adjustments using prior knowledge to improve general fit to observations followed by an inverse calibration to update and optimize input parameters, using an iterative ensemble smoother algorithm implemented in PEST++ version 5.0. This resulted in a model that generally was in good agreement with observed, dynamically varying hydrologic conditions from 1900 to 2019. The calibrated model was used to develop two base-case models for scenario testing of future, hypothetical conditions where one represented average-annual conditions, and one represented average-seasonal conditions from 2010 to 2019. The model representing average-annual conditions was modified further to represent an alternate sea-level position of 6 feet above the North American Vertical Datum of 1988, and the model representing average-seasonal conditions was modified to represent the average seasonal effects of a 5-year drought imposed upon current hydrologic conditions. Recharge is the sole source of water to the aquifer system; groundwater discharges to coastal water and streams and is withdrawn by pumped wells. Model-estimated annual recharge ranged from about 11 inches in 1965 to 41 inches in 1983. On average, from 2010 to 2019, about 23 percent of water was pumped from wells, and about 47 and 27 percent discharged to coastal waters and streams, respectively; the remaining 4 percent was water that moved into storage in the aquifer matrix. Water levels on Long Island vary naturally during time in response to changes in recharge; the amount of variation is largest in the interior of the island, in areas with highest water table altitudes near groundwater divides and lowest near streams and the coastal waters. The total range of water table altitudes on Long Island between 1900 and 2019 ranged from near 0 to more than 70 feet in western parts of Long Island. The largest range in altitudes is in New York City and is associated with areas of large historical withdrawals between the 1920s and the late 1980s. Water table altitudes generally varied by less than 10 feet in eastern Suffolk County, where the aquifer is under more natural conditions. Saltwater intrusion is of great concern on Long Island, particularly in western Long Island where both the unconfined and confined parts of the aquifer system have been intruded in response to large-scale groundwater withdrawals; however, the volume of freshwater in the islandwide aquifer system only has changed by about 5 percent between 1900 and 2019. The decadal change in the freshwater volume was largest during the early and mid-20th century, corresponding to the largest historical pumping, but that volume change did not exceed 1 percent. The negligible change in freshwater volume suggests that saltwater intrusion as of 2019 was limited at an islandwide scale but continues to occur in local areas of Queens and Nassau Counties, adversely affecting current water supplies and limiting future water supplies for affected communities. The regional groundwater model developed for this investigation is a tool that can be used to help determine the viability of current and future water supplies at a regional scale and can be used to support development of additional models at finer scale to support more focused assessments of groundwater sustainability.

New York↗
USGS2024

Distinguishing natural sources from anthropogenic events in seismic data

As seismic data are increasingly used to investigate a diverse range of subsurface phenomena beyond regular fast-rupturing earthquakes (Peng and Gomberg, 2010; Beroza and Ide, 2011), it is important to acknowledge that human-generated ground vibrations may be mistaken for naturally generated subsurface processes (Larose et al., 2015; Li et al., 2018). Correct discrimination of natural processes from anthropogenic noise is especially pressing given the trend in seismic detection research toward automated algorithms and machine learning methods (Yoon et al., 2015; Kong et al., 2019;Mousavi and Beroza, 2022) and the growth in seismic data collection in new environments such as urban and industry settings (e.g., Díaz et al.,2017).

Seismological Research Letters↗
USGS2024

Oblique contraction along the fastest ocean-continent transform plate boundary focuses rock uplift west of the Fairweather fault, southeast Alaska

Contraction along the Yakutat–North America plate boundary drives 4.6–9.0 mm/year Holocene rock uplift rates along Earth's fastest slipping (≥49 mm/year) ocean–continent transform fault, the Fairweather Fault. Between Icy Point and Lituya Bay, the near-vertical Fairweather fault focuses rock uplift and rapid right-lateral slip by accommodating both vertical and fault-parallel strain during oblique-slip and separate, predominantly strike-slip ruptures. Unusually high uplift rates, indicated by radiocarbon and luminescence dating, result from a 10-km-wide, asymmetric, positive flower structure along a 20°, ∼30-km-long restraining double bend in the Fairweather fault. The principal reverse fault in the flower structure, the offshore, blind Icy Point–Lituya Bay fault, ruptures no more than every 460–1040 years evidenced by uplifted Holocene shorelines. Maximum 3–5 m coseismic uplifts imply 3.1–10 m dip slip per event and earthquake magnitudes of M w 7.0–7.5. The Yakutat block collides obliquely into North America, and our model entails oblique slip on the Fairweather fault with and without corupture on the reverse fault. Oblique slip is evident by vertically offset (>25 m) fluvial and marine terraces and by the primary Fairweather fault strand that strikes >20° to the west of plate-boundary motion.

Alaska↗
USGS2026

Sackung at Bald Eagle ridge, central Colorado: An updated interpretation of ridge-spreading movement, structures, and mechanisms from 50 years (1975–2025) of U.S. Geological Survey research

Slow gravitational failures of mountain peaks and ridges are poorly understood. Herein, we report on 50 years of studies at a slowly spreading castellate ridge in the Sawatch Range in central Colorado. The orientations of geomorphic-structural features indicate that the fractured Precambrian granitic rock underlying the ridge has extended and spread northwestward toward the formerly glacier-covered Busk Creek valley. Results from surveying, field-based geomorphic-structural mapping using lidar, rock mass quality measurements, a passive seismic survey, and satellite radar provide a major update to research started by U.S. Geological Survey researchers in the 1970s and 1980s. New insights include a recognition that the entire ridge has slowly moved by concurrent sliding along an inferred northwest dipping, compound basal-slip surface (or zone), and through the formation of multiple grabens by normal faulting and flexural toppling along sets of pre-existing fractures that dip moderately (∼45°) to the southeast. We were unable to distinguish the presence of a sudden and strong contrast in seismic velocity across the inferred slip surface. Movement during the 50-year study period has been episodic and gradually decreasing, in correspondence with decreasing cumulative annual precipitation and increasing mean annual air temperatures. The fastest moving area, just upslope from the glacier trimline, had an average horizontal velocity of 3 – 4 mm/yr. Evidence suggests that movement started as a paraglacial response mechanism, but because of the site’s proximity to the Rio Grande Rift, we cannot exclude earthquake shaking as a mechanism for initiation or enhancement of slope movement. An estimate of longer-term horizontal movement from the exposed basal-slip surface at the uphill side of the ridgetop graben is ∼1.1 mm/yr for the 13 – 14 ky post-glacial period. Broad implications of our work are that: (1) long-term measurements (decades or longer) of slope movement can add insights into how sackungen form and evolve through time; (2) the identification of thrust faults and toes in zones of compression near valley bottoms can be crucial for interpreting sackung failure mechanisms, and (3) the use of passive-seismic techniques to identify the depth to a slip surface may not be successful in granitic terrain dominated by planar fractures and subtle changes in rock-mass characteristics.

Colorado↗
USGS1976

Medicine Lodge thrust system, east-central Idaho and southwest Montana

The Medicine Lodge thrust system, exposed in east-central Idaho and southwest Montana, is a major segment of the North America Cordilleran fold and thrust belt on which Precambrian and Paleozoic rocks have been telescoped and transported far east of their depositional area. The fault has overlapped rocks that initially were deposited in differing sedimentary environments on opposite sides of the northwest-trending geanticlinal Lemhi arch. The nature of the arch itself has been obscured by later thrusting, but it can be roughly reconstructed as a major landmass recurrently uplifted from Precambrian Y time at least through the Mesozoic. Although sections of the large landmass have been identified in the past as small islands, it was instead a southern extension of Belt island, and exerted a major influence on sedimentation patterns. The thrust has obscured recognition of correlative sedimentary rock units. It also appears to have controlled the distribution of volcanic rocks in satellite centers of the main field of Challis Volcanics. The thrust system has exerted a major influence on the emplacement of granodiorite-quartz monzonite stocks and related mineral deposits in east-central Idaho. Recognition of the fault as a major influence in intrusive activity and deposition of metallic mineral deposits suggests new possibilities for mineral resource exploration in this region. And consideration of the stratigraphic, paleogeographic, and structural framework of sedimentary rocks beneath the thrust suggests the possibility of petroleum and natural gas resources in the region north of the Snake River Plain.

Idaho, Montana↗
USGS2022

Waters divided: A history of alluvial fan research and a view of its future

Flows exiting confined valleys tend to deposit sediment in fan-shaped landforms. Where deposition is wholly or largely by the tractive forces of flowing water, these landforms are called alluvial fans. They are the product of the progressive division of water and sediment downfan, from slopes that may exceed 0.10 to distal slopes that may be below 0.01. Channel depths also tend to decline, from values that approach one to several meters at steep fanheads, to a few decimeters at distal fan margins. The result is a radiating, depositional ramp where confined or unconfined flows transport sediment from source basins to bounding streams, subsiding basins, or stable platforms. Where streams or subsiding basins consume the sediment supply from the source basin, the fan may approach a steady form whose extent and distal slope are set by stream location or subsidence rate. Where boundary conditions do not remove sediment, the fan may prograde out to long distances and low slopes (<0.01). Theoretical and experimental work over the past several decades support the notion that alluvial fan long-profiles become steeper as sediment supply increases or transport capacity decreases, and increasingly concave upward as the rate of bed material deposition decreases downfan. Grainsize distributions of alluvial fans seem to span the range observed in alluvial rivers, with no processes that uniquely identify them, apart from the distributary pattern of deposition. Bed sand cover tends to increase downfan in arid-region fans, with an absence of systematic downfan fining of coarser grain sizes. Surficial mapping and geochronology have demonstrated that fan deposition varies greatly through time, arguably from climate variations that alter hillslope sediment supply. The combination of surficial mapping and hydraulic modeling with high-resolution topography can now produce detailed flood susceptibility maps. The effective use of these maps to protect lives and property, however, depends on answering many of the enduring questions about the mechanics of how water and sediment divide down alluvial fans.

Book chapter↗
USGS2025

Mechanics and statistics of postseismic shaking

Analysis of two weeks of continuous post-seismic shaking after the 2019 M7.1 Ridgecrest, CA earthquake sequence using 4 nearby borehole seismometers reveals that continuous ground motions decay as Omori’s law in time and follow the Gutenberg-Richter distribution in logarithmic amplitude. The measured temporal decay in amplitudes agrees with predictions of the rate-and-state framework and indicates shaking amplitudes are proportional to the velocity of afterslip. Our ground motion-based statistical framework provides a basis to forecast shaking intensity in the minutes to hours after a large earthquake.

California↗
USGS2025

The role of bedrock circulation depth and porosity in mountain streamflow response to prolonged drought

Quantitative understanding is lacking on how the depth of active groundwater circulation in bedrock affects mountain streamflow response to a multi‐year drought. We use an integrated hydrological model to explore the sensitivity of a variety of streamflow metrics to bedrock circulation depth and porosity under a plausible extreme drought scenario lasting up to 5 years. Endmember depth versus hydraulic conductivity relationships and porosity values for fractured crystalline rock are simulated. With drought, a deeper circulation system with higher drainable porosity more effectively buffers minimum flow and significantly limits perennial stream loss in comparison to a shallow circulation system. Streamflow buffering is accomplished through extensive groundwater storage loss. However, deeper circulation systems experience prolonged recovery from drought in comparison to storage‐limited shallow systems. Research highlights the importance of characterizing the deeper bedrock hydrogeology in mountainous watersheds to better understand and predict drought impacts on stream ecosystem health and water resource sustainability.

Colorado↗
USGS2024

A robust quantitative method to distinguish runoff-generated debris flows from floods

Debris flows and floods generated by rainfall runoff occur in rocky mountainous landscapes and burned steeplands. Flow type is commonly identified post-event through interpretation of depositional structures, but these may be poorly preserved or misinterpreted. Prior research indicates that discharge magnitude is commonly amplified in debris flows relative to floods due to volumetric bulking and increased frictional resistance. Here, we use this flow amplification to develop a metric ( Q* ) to separate debris flows from floods based on the ratio of observed peak discharge to the theoretical maximum water discharge from rainfall runoff. We compile 642 observations of floods and debris flows and demonstrate that Q* distinguishes flow type to ∼92% accuracy. Q* allows for accurate identification of debris flows through simple channel cross-section surveys rather than through qualitative interpretation of deposits, and therefore should increase the performance of models and engineered structures that require accurate flow-type observations.

Geophysical Research Letters↗
USGS2024

Automated, near real-time ground-motion processing at the U.S. Geological Survey

We describe automated ground‐motion processing software named gmprocess that has been developed at the U.S. Geological Survey (USGS) in support of near‐real‐time earthquake hazard products. Because of the open‐source development process, this software has benefitted from the involvement and contributions of a broad community and has been used for a wider range of applications than was initially envisioned. Here, we give an overview and introduction to the software, including how it has leveraged other open‐source libraries. We highlight some key features that gmprocess provides, compare response spectra calculated with the automated processing approach of gmprocess to the response spectra provided by the Next Generation Attenuation projects, and summarize projects that have utilized gmprocess. These use‐cases demonstrate that this software development effort has been successfully leveraged in earthquake research activities both within and outside the USGS.

Seismological Research Letters↗
USGS2024

Geologic map of the northwest flank of Mauna Loa volcano, Island of Hawai‘i, Hawaii

Mauna Loa, the largest active volcano on Earth, has erupted 34 times since written descriptions became available in A.D. 1832. The most recent eruption of Mauna Loa occurred on November 27, 2022, after a 38 year hiatus; it lasted for 12 days. Some eruptions began with only brief seismic unrest, whereas others followed several months to a year of increased seismicity. Once underway, Mauna Loa’s eruptions can produce lava flows that may reach the sea in less than 24 hours, severing roads and utilities. For example, lava flows that erupted from the Southwest Rift Zone in 1950 advanced at an average rate of 9.3 kilometers per hour (5.8 miles per hour); all three lobes reached the ocean within ~24 hours. Near the eruptive vents, the flows likely traveled even faster. In terms of eruption frequency, pre-eruption warning, and rapid flow emplacement, Mauna Loa has great volcanic-hazard potential for the Island of Hawai‘i. Volcanic hazards on Mauna Loa can be anticipated, and risk substantially mitigated, by documenting its past activity to refine our knowledge of the hazards, and by alerting the public and local government officials of our findings and their implications for hazards assessments and risk. The map of the north and west flanks of Mauna Loa shows the distribution and relation of volcanic and surficial sedimentary deposits. It incorporates previously reported work published as generalized small-scale maps and a more detailed map. Within the mapped area, lava has flowed from three different source regions: the Northeast Rift Zone (22 percent), the summit (64 percent), and radial vents (14 percent). All three have different points of origin which, in turn, affect the flow characteristics and periodicity of activity. The map area includes the uppermost part of the NERZ and extends from the highest elevation––13,040 feet at the south end of the Kokoolau quadrangle, just below the summit caldera––to the sea northwest and west of the summit. Lava that erupts from the north and west flanks typically flows to the west, northwest, or north, depending on the vent location. Both morphologic lava flow types—‘a‘ā and pāhoehoe—are present. Pāhoehoe units tend to spread out or widen in low-slope regions, such as in the saddle regions between Mauna Loa and Mauna Kea or between Mauna Loa and Hualālai. In comparison, ʻaʻā flows generally produce narrower flow lobes that have higher relief. This map is the fifth in a series of five maps that will cover Mauna Loa volcano. NOTE: Map sheet 1 contains lines and type with overprint. This feature may be turned on or off in the Adobe Acrobat page display preferences.

Hawaii↗
USGS2026

pySATSI: A Python package for computing focal mechanism stress inversions

We introduce pySATSI, a Python package for computing earthquake focal mechanism stress inversions. This algorithm can handle a wide variety of types of stress inversion problems with a single script and can duplicate many capabilities of preceding methodologies. We also add new capabilities that include spatiotemporally variable inversion grids, damped stress estimates for clusters with few or no focal mechanisms, and variable fault‐plane ambiguities that the user can assign to individual events. In addition, we added the ability to use damped stress inversions with fault‐plane ambiguity probabilities that are weighted by fault instabilities. Our algorithm is computationally efficient with faster runtimes than previous algorithms, scales well for large datasets, and can be easily parallelized.

Seismological Research Letters↗
USGS2025

Measurement of in situ-produced cosmogenic nuclides in fine-grained quartz from shale

In situ -produced 10 Be in quartz is widely used to constrain exposure ages and denudation rates, traditionally measured in sand-sized grains. Here we report a new method for isolating fine-grained quartz from shale and demonstrate its reliability for grain sizes down to single microns. Sequential dissolution tests and analyses of grain size separates show that meteoric 10 Be is eliminated and that recoil losses during cosmogenic nuclide production are balanced by implantation from other mineral grains. High-temperature combustion leads to diffusion of meteoric 10 Be into fine-grained quartz and must be used with caution.

Nuclear Instruments and Methods in Physics Researc↗
USGS2025

Preface to the focus section on earthquake-induced ground deformation

Ground failure due to earthquake-induced liquefaction, surface fault rupture, and landsliding has caused substantial damage in the past and continues to pose risks to critical infrastructure in the future. The consideration of ground failure is central to engineering analysis and design, ranging from site-specific engineering assessments of ground failure potential to broader regional-scale ground failure assessments of near-real-time earthquake impacts or longer-term portfolio risk. Uncertainties in all aspects of the problem complicate the prediction of earthquake-induced ground failure, including the identification of hazard-susceptible geomaterials, characterizing their spatial extent and physical properties, spatio-temporal variability in groundwater conditions, characterization of earthquake ground motions, assessing ground failure severity, and linking ground failure severity to infrastructure damage and loss.

Seismological Research Letters↗
USGS2026

The geologic history of the Chehalis Forearc Basin, Washington State, USA

The Chehalis basin is located between the Cascade arc and the Coast Range in southwest Washington State. It consists of sedimentary and volcanic rocks deposited throughout the Cenozoic and is underlain by the Siletzia terrane, a thick, large igneous province accreted in the Eocene. Here, we constrain evolution of the Chehalis basin depocenter using isochore maps derived from isostatic gravity anomalies, borehole data, and stratigraphy for several time periods: the Eocene (47.6–36.8 Ma), the Oligocene (36.8–20 Ma), and the Neogene (20–0 Ma). Our results suggest that local subsidence is driven by deformation on faults that bound and intersect the basin. We see northward depocenter migration, interpreted as a shift in deformation from the northwest striking Cedar Creek fault to the west striking Doty fault. We interpret these data in terms of the long-term north-south shortening and clockwise rotation of the Cascadia forearc. During the Eocene, the Cedar Creek fault was preferentially aligned with north-south shortening, but became less active when clockwise rotation brought the Doty fault into east-west alignment with the stress field. Sediment accumulation rates decreased from 196 m/Myr in the Paleogene (∼40–20 Ma) to 27 m/Myr in the Neogene (∼20–0 Ma) as Miocene uplift of the Coast Range limited accommodation space and shifted the depositional environment from marine to fluvial. Our results are consistent with the geologic evolution of the Portland and Tualatin basins to the south and reveal a depositional and structural history uniquely shaped by clockwise rotation of the Cascadia forearc.

Washington↗