Geology ReportsSearch

SEARCH · Geology Reports

Results for “Journal of Earthquake Engineering (JEE)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,705 records · Page 18Linked to original sources

Rapid characterization of the 2025 Mw 8.8 Kamchatka, Russia earthquake

The 29 July 2025 M w 8.8 Kamchatka, Russia, earthquake was the sixth largest instrumentally recorded earthquake. This event was seismically well observed at regional and teleseismic distances, but publicly available near‐source data were sparse at the time of the event, presenting unique challenges for rapid source and impact characterization. The U.S. Geological Survey (USGS) National Earthquake Information Center provides global real‐time monitoring for earthquakes, including rapid response information products that estimate source characteristics, shaking, and the resulting impacts. We describe the USGS rapid response earthquake information products following the Kamchatka event and discuss their implications for ongoing hazards in the region. We describe potential improvements to our response workflows motivated by this event, including more rapid constraints on source geometries and the automated selection of fault geometries for finite‐fault inversions. The rapid response products together support the interpretation of a unilateral southwestward rupture with significant slip on the southwestern end of the rupture extent. The M w 8.8–9.0 event in 1952, which ruptured a comparable extent of the Kuril–Kamchatka subduction interface, has many similarities to the 2025 rupture. This illustrates that slip deficits may remain following great earthquakes and highlights the usefulness of comparative studies between historic and modern events.

Kuril-Kamchatka subduction zone

Moment magnitude for small earthquakes in the Delaware basin of west Texas and southeast New Mexico, USA

The Delaware Basin region of west Texas and southeast New Mexico has become one of the most prolific regions of seismic activity in the continental United States due to widespread hydraulic fracturing and wastewater disposal injection. In response to the increased number of earthquakes in this region, rapid and accurate characterization of earthquake sources is necessary to understand the evolution of seismic activity and level of seismic hazard associated with these earthquakes. This study re-evaluates earthquake magnitudes, estimating moment magnitude (MW) for small earthquakes in the Delaware Basin using 1) moment-rate spectra derived from S-wave coda envelopes, and 2) a relative magnitude method that relies exclusively on the ratio of waveform amplitudes between highly correlated waveform pairs. The coda-envelope method produces accurate M W estimates for small earthquakes ( M 1.5 – 3) that are consistent with independent, waveform modeled moment magnitudes for events with M W > 3 . Using the relative amplitudes method to extend these M W magnitudes to many other events, we successfully provide relative moment magnitude ( M W,rel ) values for 81% of the Texas Seismological Network catalog in the Delaware Basin region, and 45% of the USGS Induced Seismicity Project’s catalog of events in southeast New Mexico. The adoption and integration of the calibrated M W,rel method with current magnitude estimation methods offers valuable insights into the relationships between local and moment magnitude and will contribute to improved characterization of widespread induced seismicity.

New Mexico, Texas

Widespread abyssal turbidites record megathrust earthquake-triggered landslides and coseismic deformation in the Cascadia subduction zone

Abyssal marine turbidites provide some of the longest and most spatially extensive records of subduction zone earthquake recurrence globally; however, correlation of these deposits over long distances and interpretation of synchronous emplacement requires both an understanding of the turbidite generating systems and precise dating. Here, we present an integrated suite of high-resolution bathymetry, subbottom profiles, and sediment cores from combined autonomous underwater vehicle, remotely operated vehicle, and ship-based studies at a key paleoseismic site in the southern Cascadia subduction zone. We demonstrate how widespread, earthquake-triggered landslides on the lower slope deposit discrete, proximal mass transport deposits (MTDs) that grade offshore into complex, interfingered abyssal turbidites, which correspond to records of megathrust earthquake history. We propose accretion and oversteepening of thrust folds on the lower slope both preconditions the slope to fail and provides a perpetual source of unstable material to fail during every earthquake cycle. Furthermore, we suggest the periodic and pervasive landsliding indicates coseismic deformation of the outer accretionary wedge during megathrust rupture.

California, Oregon

Deformed submarine terraces in Puget Sound, Pacific Northwest, indicate only one M >~7.5 earthquake on the Seattle fault zone in the past 11,000 yr

Submerged marine terraces in Puget Sound, deformed across the Seattle fault zone (SFZ), indicate that only one earthquake as large as M~7.5 has occurred in at least the past 11 kyr. Previous paleoseismic studies document a M~7.5 earthquake between 923–4 CE, which uplifted coastal marine terraces by as much as 8 m. We demonstrate that this earthquake was the only such event since ~11 ka by mapping and quantifying deformation of older marine terraces, now submerged in Puget Sound. The submerged terraces, attributed to a late-glacial sea-level lowstand, record both glacial isostatic rebound and tectonic deformation. Vertical offset of the ~11 ka terraces within the SFZ is comparable to that of the marine terraces uplifted in 923 CE, implying no additional large (M>~7.5) earthquake on the SFZ since ~11 ka. This result implies a longer recurrence interval than current hazard estimates, which assumes recurrence of M>7.1 events every 5 kyr. Our mapping of SFZ deformation since ~11 ka also supports fault segmentation and contiguous block uplift between the Seattle and Tacoma fault zones.

Washington

Seismic intensities, ground motions and basin amplification from the 2022 Mw 6.4 Ferndale, California intraslab earthquake

On December 20, 2022, a Mw 6.4 earthquake occurred at a depth of 18 km within the subducting Gorda plate in the Mendocino Triple Junction (MTJ), one of the most seismically active regions of the contiguous United States, causing widespread damage to local communities. Here we document the seismic intensities, ground motions, and basin amplification effects recorded by this earthquake across Humboldt County as part of an ongoing scientific effort to understand subduction zone earthquake hazards. Modified Mercalli Intensity (MMI) values from our post-earthquake field survey report shaking intensities as high as VIII (Severe). Strong ground motion data from 54 seismic stations were processed to calculate amplitude and frequency content parameters across Northern California. The maximum calculated geometric mean PGA and PGV are 1053 cm/s 2 and 52 cm/s (respectively), both recorded within the 3 km deep Eel River sedimentary basin. Comparisons with four published Ground Motion Prediction Equations indicate that PGA and PGV measurements align with expected attenuation-distance patterns for intraslab earthquakes of this nature. Within the Eel River Basin, ground motions for frequencies above 1 Hz are amplified, with respect to reference stations, by factors greater than 2. Our findings suggest that peak ground motions were mainly caused by sedimentary basin site-effects within the Eel River basin, although rupture directivity may have also increased ground motion amplitudes locally. While the Ferndale area is primarily impacted by shallow intraslab earthquakes, our results also raise questions about site-response and basin amplification hazards from a potential megathrust earthquake. The high seismicity rates of the southernmost Cascades call for stronger regional preparedness and improved strategies to mitigate the effects of such a large-scale disaster.

California

Reconciling bias in moderate magnitude earthquake ground motions predicted by numerical simulations

Recent studies found a significant underprediction in ground motion intensity measures for finite-fault simulations of moderate magnitude events in southern California relative to established ground motion models. This study aims to understand the source(s) of this bias by evaluating ground motion residuals. For this, simulations have been performed for a total of 27 well-recorded earthquakes in southern California. Systematic efforts have been employed to identify the source(s) of bias by ruling out factors that are insignificant. Preliminary findings indicate that the magnitude-area scaling used in the simulations is the likely major cause of the observed bias. Adjustment in the source attributes on event-by-event basis is underway to study if the observed bias can be reconciled.

Conference Paper

2023 Earthquake Ground-Motion Workshop for the Central and Eastern United States, with a focus on the Gulf and Atlantic Coastal Plains—Agenda and abstracts

The U.S. Geological Survey held a virtual workshop December 7–8, 2023, to share research and ideas about earthquake ground motions in the Central and Eastern United States, with a focus on the Atlantic and Gulf Coastal Plains. The workshop was organized to learn about potential regionalization of ground-motion characteristics (source, path, and site), consider new explanatory variables for site response, and hear and discuss updates on ground-motion research on the Atlantic and Gulf Coastal Plains. The workshop was organized into a series of contributed presentations and three panel discussions held during 2 days. This report documents the agenda, contributed abstracts, and panel summaries.

Scientific Investigations Report

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report

Lessons in business recovery following the 2023 Kahramanmaraş earthquake sequence, Türkiye informed by women entrepreneurs

On 6 February 2023, Southern Türkiye was hit by devastating earthquakes, directly affecting over 14 million people in 11 cities, causing more than 50,000 deaths and the destruction of more than 800,000 buildings. This article goes beyond the physical damage imposed by the catastrophe to discuss the effects of the earthquakes on the operations of women-owned businesses. The mixed-method study with entrepreneurs belonging to a women’s business association operating in a moderately disrupted part of the region explores their struggles and recovery expectations. Thirty-five questionnaires were analyzed to identify the reasons for business closure, challenges, and needs faced in the post-disaster period and their recovery strategies. In addition, 23 entrepreneurs participated in roundtable discussions to provide a broader context to their responses to survey topics as well as lessons learned. Across both the survey and roundtables, while many respondents reported minor physical damage to their building, they also experienced financial and personal challenges from disruption to equipment, infrastructure, services, supply chains, institutional decisions, employee well-being, and customer base. Many used their business resources and personal savings to assist employees and others in the community. The women entrepreneurs often felt their recovery needs were ignored by government and private relief organizations and encountered barriers to receiving assistance from public and private institutions. Organizing together as women in business, even informally, provided mutual support during the crisis and recovery periods and catalyzed their role in support of their communities. The results illuminate functional community recovery as a balance of recovery of built infrastructure functionality and recovery of the broader social and economic fabric of the community.

southern Turkey

Haunted Summerville: Ghostly lights or earthquake lights?

Among the colorful local lore in the Charleston, South Carolina, area, are a number of ghost stories, shared not only over campfires but also in published books. Among the most well-known of the stories is the tale of the Summerville Light. Local lore holds that a strange light sometimes seen in a remote area is a lantern carried by the ghost of a local woman who once waited hours for her husband, who turned out to have been decapitated earlier that day in a train accident (DePoppe, 2023). Extant sources suggest the ghost stories began to circulate in the 1950s to 1960s. So pervasive was the lore that (Old) Sheep Island Road became known among local residents as Light Road, with a local stretch of road known today as Old Light Road. Reviewing the location where the lights appear as well as the nature of accounts, I suggest that many if not all of the anecdotal observations can be most readily attributed to natural phenomena, including earthquake lights from earthquakes that were too small to be felt. Accounts of lights near Summerville cluster in proximity to the generally accepted epicenter of the 1886 Charleston, South Carolina, earthquake, where foreshocks to the 1886 mainshock were apparently concentrated, and within a few kilometers of three M3.5 – 4.4 earthquakes in 1959 and 1960.

South Carolina

A northeast-dipping zone of low frequency earthquakes at the southern edge of Cascadia subduction

Tectonic tremor monitoring occasionally detects events in an anomalous zone in southern Cascadia, 50–100 km west of the main tremor band, near the expected southern edge of the subducting Gorda slab at the Mendocino triple junction. To investigate the geometry and temporal behavior of this tremor, we examine its constituent low-frequency earthquakes (LFEs) by developing 27 stacked LFE waveform templates that we use to detect events from 2018 to 2024. We then relocate LFE sources together with regional seismicity. We find that LFE hypocenters form a northeast-dipping alignment at 22–29 km depth, extending eastward from a zone of micro-earthquakes, ∼15 km south of the southern edge of Gorda slab seismicity. These LFE families exhibit small bursts of activity every few days. Considering the strong world-wide association of tremor and LFEs with high slip-rate, plate-bounding faults, we hypothesize these LFEs may demark the southern edge of Cascadia subduction.

California

Earthquake stress-drop values delineate spatial variations in maximum shear stress in the Japanese forearc lithosphere

Earthquake stress drop (Δσ) may increase with depth and stress in the brittle lithosphere. However, the range of uncertainty in Δσ and the lack of constraints on absolute stress make it difficult to establish whether they are correlated. Here, we investigate Δσ dependence on depth and maximum shear stress ( τ max ) based on ~11 years of seismicity in the northeastern Japanese forearc following the 2011 Tohoku-Oki megathrust earthquake. We interpret Δσ estimates computed using both individual spectra and spectral-ratio methods and find that Δσ exhibits a clear depth dependence within the seismically active upper ~60 km of the forearc lithosphere ( ~ 0.8 MPa per 10 km). We further compare Δσ values with quantitative τ max estimates from finite-element models of force balance. We find that median Δσ values increase with τ max in the brittle forearc lithosphere and that earthquake stress release is proportional to τ max . The dependence of Δσ on τ max explains the apparent depth dependence of Δσ and suggests that average Δσ values provide a relative measure of the stress at failure. In the northeastern Japanese forearc, Δσ values remained roughly constant in the decade following the Tohoku-Oki earthquake, suggesting negligible changes in failure stress in the forearc since the mainshock.

Communications Earth and Environment

To heal or not to heal?: 2. The moment-recurrence time behavior of repeating earthquakes in the 2011 Prague, Oklahoma aftershock sequence is consistent with laboratory healing rates

The timing and failure conditions of an earthquake are governed by the interplay between fault reloading and restrengthening. The moment-recurrence time behavior of repeating earthquakes can give observational estimates of fault healing rates; however, it is difficult to link these observed healing rates to laboratory studies of frictional healing in part because of uncertainty in lithology. Here, we study the 2011 Prague earthquake sequence, which includes repeating earthquakes in the Arbuckle group and the granitic basement, and compare them to laboratory experiments on samples of the Arbuckle and Troy granite (representative of the basement rock) (Okamoto et al., 2025, https://doi.org/10.1029/2024JB030573 ). We find three spatially distinct groups of repeating earthquakes with different moment-recurrence behavior: (a) constant moment-recurrence time in the Arbuckle group, (b) scattered moment-recurrence time at the intersection of the foreshock-mainshock fault in the granitic basement, and (c) moment-predictable behavior outside of the foreshock-mainshock fault intersection also in the granitic basement. Our observation of stagnant healing for repeating sequences in the Arbuckle group is consistent with laboratory observations of low healing rates for moderately high pore fluid pressures in Arbuckle samples. For the moment-predictable group, the source radius that is required in order to match healing rates is consistent with source radius estimations when taking into account reasonable attenuation of the P- pulse width. Overall, we observe diverse healing behaviors in the seismic families that are consistent with laboratory healing rates, providing seismic evidence that contact-scale frictional mechanisms are relevant to large-scale earthquake dynamics.

Oklahoma

Extreme plate boundary localization promotes shallow earthquake slip at the Japan Trench

The 2011 Mw9.1 Tohoku-oki earthquake is exceptional among great earthquakes for having peak slip of ~50-70 m on the shallowest portion of the plate boundary megathrust. International Ocean Discovery Program Expedition 405 drilled multiple holes through the megathrust in the large slip region and at a Pacific Plate input site. The megathrust preferentially develops at the top or base of the pelagic clay in the input section where pronounced contrasts in physical properties are present. This results in a narrow, weak fault located at a major mechanical contact between frontal prism mud and subducted clay. Localization imposed by the input section enhances the tendency for shallow seismic slip, showing the Japan Trench may be more susceptible to ruptures with large shallow slip than margins without weak clays.

Japan Trench

ShakeAlert® version 3: Expected performance in large earthquakes

The ShakeAlert earthquake early warning (EEW) system partners along with U.S. Geological Survey (USGS) licensed operators deliver EEW alerts to the public and trigger automated systems when a significant earthquake is expected to impact California, Oregon, or Washington. ShakeAlert’s primary goal is to provide usable warning times before the arrival of damaging shaking. EEW is most likely to achieve this goal in large‐magnitude earthquakes. In recent years, ShakeAlert has gone through a series of upgrades to its underlying scientific algorithms aimed at improved performance during large earthquakes. Version 3 of this software recently went live in the production system and includes improvements to all algorithms. The main seismic algorithms that detect an earthquake and characterize its location, magnitude, and fault rupture orientation are faster than older versions. Other key changes include: using real‐time geodetic data to characterize the magnitude growth in large earthquakes; the introduction of an alert pause procedure to compromise between speed near the epicenter and improved accuracy at larger distances; and the inclusion of a nonergodic site‐response model in the ground‐motion predictions. ShakeAlert has achieved its primary goal of usable warning times before strong shaking at some locations in real‐time operations in recent M 6 earthquakes. Using offline tests, we demonstrate usable warning times are possible for many sites with peak shaking values of modified Mercalli intensity (MMI) 7–8 in M 7+ earthquakes and also for many MMI 8–9 sites in M 8+ earthquakes. ShakeAlert partners use a variety of MMI and magnitude thresholds in deciding when to alert their users within bounds set by the USGS. Our study shows that there is room to raise the magnitude thresholds up to about M 5.5 without adversely affecting performance in large earthquakes. The ground‐motion criteria are more complex owing to a significant drop‐off in warning times between the MMI 4 and 5 levels of predicted shaking. However, widely used ShakeAlert products, such as the MMI 3 and 4 contour products, can provide sufficiently long warning times before strong shaking in moderate‐to‐great earthquakes to enable a range of protective actions.

Bulletin of the Seismological Society of America

Fiber-optic sensing for earthquake hazards research, monitoring and early warning

The use of fiber‐optic sensing systems in seismology has exploded in the past decade. Despite an ever‐growing library of ground‐breaking studies, questions remain about the potential of fiber‐optic sensing technologies as tools for advancing if not revolutionizing earthquake‐hazards‐related research, monitoring, and early warning systems. A working group convened to explore these topics; we comprehensively examined the application of fiber optics in various aspects of earthquake hazards, encompassing earthquake source processes, crustal imaging, data archiving, and technological challenges. There is great potential for fiber‐optic systems to advance earthquake monitoring and understanding, but to fully unlock their capabilities requires continued progress in key areas of research and development, including instrument testing and validation, increased dynamic range for applications focused on larger earthquakes, and continued improvement in subsurface and source imaging methods. A key current stumbling block results from the lack of clear data archiving requirements, and we propose an initial strategy that balances data volume requirements with preserving key data for a broad range of future studies. In addition, we demonstrate the potential for fiber‐optic sensing to impact monitoring efforts by documenting the data completeness in a number of long‐term experiments. Finally, we outline the features of a instrument testing facility that would enable progress toward reliable and standardized distributed acoustic sensing data. Overcoming these current obstacles would facilitate progress in fiber‐optic sensing and unlock its potential application to a broad range of earthquake hazard problems.

California, Oregon, Washington

Uncertainty in ground-motion-to-intensity conversions significantly affects earthquake early warning alert regions

We examine how the choice of ground‐motion‐to‐intensity conversion equations (GMICEs) in earthquake early warning (EEW) systems affects resulting alert regions. We find that existing GMICEs can underestimate observed shaking at short rupture distances or overestimate the extent of low‐intensity shaking. Updated GMICEs that remove these biases would improve the accuracy of alert regions for the ShakeAlert EEW system for the West Coast of the United States. ShakeAlert uses ground‐motion prediction equations (GMPEs), which calculate spatial distributions of peak ground acceleration (PGA) and peak ground velocity (PGV) from earthquake source estimates, combined with GMICEs to translate GMPE output into modified Mercalli intensity (MMI). We find significant epistemic uncertainty in alert distances; near‐source MMI estimates from different GMICEs can differ by over 1 MMI unit, and MMI extents used for public EEW alerts can differ by hundreds of kilometers for larger magnitude earthquakes ( M ∼6.5+). We use a catalog of “Did You Feel It?” shaking reports to evaluate how well GMICEs predict observed shaking. Our preferred GMICE is the one that computes MMI using PGV for high intensities and transitions to using PGA for nondamaging intensities. These results motivate updating GMICE relationships more generally, including in ShakeMap applications.

The Seismic Record

Induced earthquakes are generally not tidally triggered in Oklahoma and Kansas

Human-induced earthquakes occur along critically stressed faults as injected wastewater simultaneously heightens fluid pressure and pushes faults to failure. We investigate the possibility that small stresses imposed by Earth tides could trigger earthquakes in the induced seismicity region of Oklahoma and Kansas from 2011 to 2018. We decluster a catalog consisting of ∼110,000 earthquakes using three methods (Reasenberg, nearest-neighbor distance, and phase-bin). We find no significant tidal earthquake triggering using Schuster's p -value test for the declustered catalogs as a whole. We search for localized triggering using discretized space-time cells and find ∼0–6% of cells have significant tidal triggering which is close to what is randomly expected (5%) and indicates there is an insignificant amount of tidal triggering for the full study region. One area that has significant p -values across multiple time windows, ∼2014–2016 is ∼15 km from a region of large wastewater injection volume. It is possible that localized tidal triggering occurs for this time and area because faults remain critically stressed and are particularly susceptible to slip under the small stress load from the semidiurnal tide. Possible explanations for the lack of tidal triggering in our broader study are that the pre-seismic stressing rate in the earthquake nucleation area is faster than the tidal stressing rate (∼3 kPa/day), faults are not close enough to critically stressed to be affected by tidal forcing, and that nucleation occurs over longer periods than the tides considered in this study (∼1, ∼14 days). Fluid injection could be the source of a higher pre-seismic stress rate.

Kansas, Oklahoma