Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Icarus”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources
USGS2018

Viscous relaxation as a prerequisite for tectonic resurfacing on Ganymede: Insights from numerical models of lithospheric extension

Ganymede’s bright terrain formed during a near-global resurfacing event (or events) that produced both heavily tectonized and relatively smooth terrains. The mechanism(s) by which resurfacing occurred on Ganymede (e.g., cryovolcanic or tectonic), and the relationship between the older, dark and the younger, bright terrain are fundamental to understanding the geological evolution of the satellite. Using a two-dimensional numerical model of lithospheric extension that has previously been used to successfully simulate surface deformation consistent with grooved terrain morphologies, we investigate whether large-amplitude preexisting topography can be resurfaced (erased) by extension (i.e., tectonic resurfacing). Using synthetically produced initial topography, we show that when the total relief of the initial topography is larger than 25–50 m, periodic groove-like structures fail to form. Instead, extension is localized in a few individual, isolated troughs. These results pose a challenge to the tectonic resurfacing hypothesis. We further investigate the effects of preexisting topography by performing suites of simulations initialized with topography derived from digital terrain models of Ganymede’s surface. These include dark terrain, fresh (relatively deep) impact craters, smooth bright terrain, and a viscously relaxed impact crater. The simulations using dark terrain and fresh impact craters are consistent with our simulations using synthetic topography: periodic groove-like deformation fails to form. In contrast, when simulations were initialized with bright smooth terrain topography, groove-like deformation results from a wide variety of heat flow and surface temperature conditions. Similarly, when a viscously relaxed impact crater was used, groove-like structures were able to form during extension. These results suggest that tectonic resurfacing may require that the amplitude of the initial topography be reduced before extension begins. We emphasize that viscous relaxation may be the key to enabling tectonic resurfacing, as the heat fluxes associated with groove terrain formation are also capable of reducing crater topography through viscous relaxation. For long-wavelength topography (large craters) viscous relaxation is unavoidable. We propose that the resurfacing of Ganymede occurred through a combination of viscous relaxation, tectonic resurfacing, cryovolcanism and, at least in a few cases, band formation. Variations in heat flow and strain magnitudes across Ganymede likely produced the complex variety of terrain types currently observed.

Icarus↗
USGS2018

Relaxed impact craters on Ganymede: Regional variation and high heat flows

Viscously relaxed craters provide a window into the thermal history of Ganymede, a satellite with copious geologic signs of past high heat flows. Here we present measurements of relaxed craters in four regions for which suitable imaging exists: near Anshar Sulcus, Tiamat Sulcus, northern Marius Regio, and Ganymede's south pole. We describe a technique to measure apparent depth, or depth of the crater with respect to the surrounding terrain elevation. Measured relaxation states are compared with results from finite element modeling to constrain heat flow scenarios [see companion paper: Bland et al. (2017)]. The presence of numerous, substantially relaxed craters indicates high heat flows—in excess of 30–40 mW m −2 over 2 Gyr, with many small (<10 km in diameter) relaxed craters indicating even higher heat flows. Crater relaxation states are bimodal for some equatorial regions but not in the region studied near the south pole, which suggests regional variations in Ganymede's thermal history.

Icarus↗
USGS2019

Bright carbonate surfaces on Ceres as remnants of salt-rich water fountains

Vinalia and Cerealia Faculae are bright and salt-rich localized areas in Occator crater on Ceres. The predominance of the near-infrared signature of sodium carbonate on these surfaces suggests their original material was a brine. Here we analyze Dawn Framing Camera's images and characterize the surfaces as composed of a central structure, either a possible depression (Vinalia) or a central dome (Cerealia), and a discontinuous mantling. We consider three materials enabling the ascent and formation of the faculae: ice ascent with sublimation and carbonate particle lofting, pure gas emission entraining carbonate particles, and brine extrusion. We find that a mechanism explaining the entire range of morphologies, topographies, as well as the common composition of the deposits is brine fountaining. This process consists of briny liquid extrusion, followed by flash freezing of carbonate and ice particles, particle fallback, and sublimation. Subsequent increase in briny liquid viscosity leads to doming. Dawn observations did not detect currently active water plumes, indicating the frequency of such extrusions is longer than years.

Icarus↗
USGS2018

Complex bedding geometry in the upper portion of Aeolis Mons, Gale crater, Mars

The Upper formation of Aeolis Mons in Gale crater exhibits curvilinear bedding patterns on the surfaces of several erosional benches that have been interpreted as cross-bedding. We use High Resolution Imaging Science Experiment (HiRISE) stereo topography to test this hypothesis by measuring the bedding geometry within these benches. The bedding geometry is consistent with aeolian cross-beds: measured dips rarely exceed the angle of repose, and the distribution of dip azimuths is non-random, allowing dune morphology and paleo-transport directions to be inferred using computer models of bedforms. The inferred dune type and transport direction vary between the benches of the Upper formation, indicating that the benches are separated by sufficient time for the wind regime to change. The paleo-wind directions derived from bedding geometry measurements differ from modern wind modeling results, suggesting that the conditions during deposition of the Upper formation were unlike modern conditions. The concentric bedding patterns in some locations indicate that the rate of deposition approached the rate of bedform migration. The evidence for lithified hundred-meter-scale dunes in the Upper formation of Aeolis Mons indicates that the area was a sediment sink at the time of formation, and any hypothesis for the formation of Aeolis Mons must be compatible with these results. We present one possible sequence of events for the formation of Aeolis Mons.

Icarus↗
USGS2019

Europa’s ice tectonics: New insights from physical wax experiments with implications for subduction initiation and global resurfacing processes

Jupiter's Moon Europa has one of the youngest geological surfaces in our solar system with an age of 40–90 Ma, implying an intense history of resurfacing. The surface of Europa indeed shows abundant evidence of tectonic deformation related to extension, strike-slip, and shortening. However, observed features related to shortening are scarce compared with pervasive extensive extensional features such as dilational bands, and do not suffice as the sole mechanism for recycling aging terranes. Recently, evidence for potential plate tectonics, associated with subduction zones , has been discovered on Europa; this could be responsible for recycling most of Europa's surface. However, basic physical parameters needed to initiate subduction on Europa, such as thickness of the brittle layer, deformation rates, and orientation of pre-existing zones of weakness at which subduction could start, are not well understood. Here, we aim to better understand the process and the conditions that could lead to initiation of subduction on Europa through physical experiments, using wax to simulate Europa's two-layered (i.e. convective) icy crust. By deforming the wax, strain on Europa's surface—possibly caused by diurnal tides or its nonsynchronous rotation—is simulated. Our results indicate that subduction could initiate over a broad range of surface thicknesses and deformation rates above a minimum conductive layer thickness, but is strongly dependent on the orientation of the pre-existing zones of weakness. Very thin conductive layer experiments, however, result in a previously undescribed process that we term ductile rolldown, which creates surface features similar to double ridges observed on Europa. Thus, subduction and ductile rolldown represent physically plausible mechanisms that could play a critical role in resurfacing Europa throughout its geologic history. These results could yield significant implications for Europa's thermal history and evolution, habitability, and future spacecraft missions.

Icarus↗
USGS2019

The flood lavas of Kasei Valles, Mars

Both the northern and southern arms of Kasei Valles are occupied by platy-ridged flood lavas. We have mapped these flows and examined their morphology to better understand their emplacement. The lavas were emplaced as high-flux, turbulent flows (exceeding 10 6 m 3 s −1 ). Lava in southern Kasei Valles can be traced back up onto the Tharsis rise, which is also the likely source of lavas in the northern arm. These eruptions were similar to, but somewhat smaller than, the Athabasca Valles flood lava in Elysium Planitia, with estimated volumes of > 1200 km 3 here and 5000 km 3 in Athabasca Valles. The flood lavas in both Kasei and Athabasca Valles have evidence for distal inflation as well as widespread drainage or volume loss in medial areas; this may be an important characteristic of many large, recent Martian eruptions. Despite their great size and flux, the Kasei Valles flood lavas are only a late modification to the valley system capable of only modest local erosion. The more vigorous Athabasca Valles lava may have been capable of somewhat more erosion in its smaller valley system.

Icarus↗
USGS2019

Isotopic ratios of Saturn's rings and satellites: Implications for the origin of water and Phoebe

Isotopic ratios have long been used to learn about physical processes acting over a wide range of geological environments, and in constraining the origin and/or evolution of planetary bodies. We report the spectroscopic detection of deuterium in Saturn's rings and satellites, and use these measurements to determine the (D/H) ratios in their near-surface regions. Saturn's moons, Phoebe and Iapetus, show a strong signature of CO2 and the 13C component of this molecule is detected and quantified. Large averages of spectra obtained by the Cassini Visual and Infrared Mapping Spectrometer, VIMS, were computed for the rings and icy satellites. The observed intensities of the infrared absorptions in H2O and CO2 and their isotopes were calibrated using laboratory data and radiative transfer models to derive the D/H and 13C/12C ratios. We find that the D/H in Saturn's rings and satellites is close to the Vienna Standard Mean Ocean Water (VSMOW) and bulk Earth (4% lower than VSMOW) value except for Phoebe, which is 8.3 times the VSMOW value. This is the highest value for any Solar-System surface yet measured, and suggests that Phoebe formed from material with a different D/H ratio than the other satellites in the Saturn system. Phoebe’s 13C/12C ratio is also unusual: 4.7 times greater than terrestrial, and greater than values measured for the interstellar medium and the galactic center. The high 13C abundance in the CO2 suggests that Phoebe was never warm enough for the large D/H ratio in its surface to have originated by evaporative fractionation of its waterice (e.g., from heating in the inner Solar System before its eventual capture by Saturn). We also report the detection of a probable O-D stretch absorption due to OD in minerals on Phoebe at 3.62 μm. This absorption is not detected on other Saturnian satellites. Stronger signatures of bound water absorptions are found in the dark material of Iapetus and we report a new detection of bound water at 1.9 μm. The position of this absorption matches that seen in spectra of hydrated iron oxides but does not match absorptions seen in spectra of tholins. Despite the strong bound water signature in the Iapetus dark material, no 3.62-μm OD absorption is seen in the spectra, further indicating the high deuterium level on Phoebe is unusual. As such, it is likely that Phoebe originated in a colder part of the outer Solar System, relative to the prevailing temperatures at Saturn’s distance from the Sun.

Icarus↗
USGS2019

Clastic pipes and mud volcanism across Mars: Terrestrial analog evidence of past Martian groundwater and subsurface fluid mobilization

Clastic pipes are cylindrical injection features that vertically crosscut bedding with sharp contacts. Terrestrial pipes have cylindrical morphologies, massive or radially graded interiors, and raised outer rims. Increased grain size and subsequent cementation along the more porous edges makes the rims more resistant to weathering. Pipes have crosscutting relationships with other pipes due to multiple formation events or migrating eruption centers, and are associated with other soft sediment deformation features. Terrestrial clastic pipes form via liquefaction and fluidization, which require a near-surface groundwater system to initiate (i.e., sand sized sediments must be saturated for pipes to form). Clastic pipes (cm to 1000+m diameters) occur on Mars across multiple time periods and terrains and are recognized in both rover and orbital imagery. A conical or cylindrical geometry and massive interior/core characterize these features. The pipes on Mars show various geomorphic expressions and are classified into five types by the presence or absence of a raised outer rim, or a central pit. These types are interpreted to represent the erosional evolution of pipes at different stages from their initial surface eruptive structures to their weathered remnants (eroded conical hills). Martian pipes formed via fluidization as evidenced by: 1) raised outer rims possibly indicating textural differences along the pipe edges from traction interactions of fluid-suspended sediment; 2) crosscutting relationships with other pipes suggesting reactivated fluidization pathways or migrating eruptive vents; and 3) close spatial association between pipes and other features thought to form by soft sediment deformation (e.g., contorted bedding). Integration of terrestrial analog data with the Mars observations provides evidence for past Martian groundwater and subsurface fluid mobilization.

Utah↗
USGS2019

Dark halos produced by current impact cratering on Mars

Hundreds of new impact craters have been observed to form on Mars since spacecraft began imaging that planet. New impact craters produced visible ejecta deposits and many of them also have visible rays, similar to lunar and mercurian craters. However, some of the new martian impact craters have a circular feature of relatively low reflectance that we call a “halo.” This feature is distinct from the usual visible ejecta deposits or ray patterns. In this paper we present an observational study of this halo feature and we discuss the results of this study with respect to the nature of the halos: what they are and how they may have formed. To address these questions, we measured diameters of both halos and their central craters. We found a strong correlation between halo diameter and crater diameter, which indicates that the nature of the halos is fundamentally governed by the amount of impact energy available at their formation. Specifically, halo size is controlled by impact energy according to the non-linear relationship D H ∝ E 2/3 , where D H is the diameter of the halo and E is the impact energy. We also found that certain factors may influence the formation of the halos: a thicker dust layer and lower elevations are both correlated with larger halos. From these correlations we conclude that the local surface characteristics as well as local atmospheric pressure influence the formation of the halos. Our description and analysis of the martian halo features provide a framework upon which specific halo formation mechanisms can be developed and tested in the future.

Icarus↗
USGS2020

The Mars Global Digital Dune Database (MGD3): Composition and stability

We present an expansion to the Mars Global Digital Dune Database (MGD3) describing 1) bulk dune field composition determined by fitting a mineral spectral library to Thermal Emission Spectra (TES) data, and 2) a morphologic stability index that measures the degree of non-aeolian modification that has eroded and stabilized each dune field. This paper describes results for these two components, providing insight into global patterns of dune sand sources, postdepositional alteration, and mineral maturity. Consistent with the work of others, the main mineral components of each analyzed dune field are feldspar, pyroxene, and high-silica phases, with minor amounts of olivine and possibly sulfate minerals. Subtle global-scale spatial variations in olivine and feldspar abundances correspond with previously observed trends in surface mineralogy, suggesting that dune sand is reflective of its regional setting, and thus that aeolian sand has typically not traveled far (<~100s of km) from its source regions. Dune-field-scale stabilization features are found mainly south of 60S, and in a few areas north of 60N, consistent with observed dune and ripple migration rates in these areas. The presence of such stabilization features may be an indicator of where bedform migration rates are low. Abundances of high-silica phases are elevated in some dune fields located in the southern mid- to high-latitudes, particularly in those dune fields located on intercrater plains, where stabilization features tend to be less well developed and where ripples tend to be actively migrating. This correlation of high-silica phase abundance with bedform activity also occurs in the north polar sand seas. In the north polar sand seas, this spectral signature has been attributed to iron-bearing glass that has been weathered through acid leaching, leaving behind silica-enriched rinds, and kept free of any precipitated coatings through active saltation. We hypothesize that near and thermal infrared spectral signatures of acid leaching are indicators of aeolian activity, and thus potentially of mineral maturity, in dune sands abundant in iron-bearing glass.

Icarus↗
USGS2020

The mineral diversity of Jezero crater: Evidence for possible lacustrine carbonates on Mars

Noachian-aged Jezero crater is the only known location on Mars where clear orbital detections of carbonates are found in close proximity to clear fluvio-lacustrine features indicating the past presence of a paleolake; however, it is unclear whether or not the carbonates in Jezero are related to the lacustrine activity. This distinction is critical for evaluating the astrobiological potential of the site, as lacustrine carbonates on Earth are capable of preserving biosignatures at scales that may be detectable by a landed mission like the Mars 2020 rover, which is planned to land in Jezero in February 2021. In this study, we conduct a detailed investigation of the mineralogical and morphological properties of geological units within Jezero crater in order to better constrain the origin of carbonates in the basin and their timing relative to fluvio-lacustrine activity. Using orbital visible/near-infrared hyperspectral images from the Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) along with high resolution imagery and digital elevation models, we identify a distinct carbonate-bearing unit, the “Marginal Carbonates,” located along the inner margin of the crater, near the largest inlet valley and the western delta. Based on their strong carbonate signatures, topographic properties, and location in the crater, we propose that this unit may preserve authigenic lacustrine carbonates, precipitated in the near-shore environment of the Jezero paleolake. Comparison to carbonate deposits from terrestrial closed basin lakes suggests that if the Marginal Carbonates are lacustrine in origin, they could preserve macro- and microscopic biosignatures in microbialite rocks like stromatolites, some of which would likely be detectable by Mars 2020. The Marginal Carbonates may represent just one phase of a complex fluvio-lacustrine history in Jezero crater, as we find that the spectral diversity of the fluvio-lacustrine deposits in the crater is consistent with a long-lived lake system cataloging the deposition and erosion of regional geologic units. Thus, Jezero crater may contain a unique record of the evolution of surface environments, climates, and habitability on early Mars.

Icarus↗
USGS2020

Present-day mass wasting in sulfate-rich sediments in the equatorial regions of Mars

Present-day topographic changes are observed on steep slopes in equatorial regions of Mars that are associated with sulfate-rich sediments. Hydrated sulfates are known to be present in many sedimentary deposits on Mars. We document volume changes in the form of mass movements and gullies over these regions. We have estimated erosion rates of ~12 mm/yr (or ~1.2–120 mm/yr with uncertainties) over steep slopes on sulfate-rich mounds in Ganges Chasma, much higher than Mars average erosion rate near a few μm/yr. At this rate, the mounds would have shrunk in diameter by ~18,000 km over 3 b.y., which greatly exceeds the width of the canyon, supporting suggestions that these sediments once filled the canyons. Due to the soft nature of typical sulfate-rich sediment, it is susceptible to mass wasting, and active eolian processes may remove loose material to maintain steep slopes. The water in hydrated sulfates could potentially be extracted and used as a resource for future humans on Mars, and our results suggest that such deposits would be mechanically weak.

Icarus↗
USGS2020

An aeolian grainflow model for Martian Recurring Slope Lineae

Recurring Slope Lineae (RSL) on Mars have been enigmatic since their discovery; their behavior resembles a seeping liquid but sources of water remain puzzling. This work demonstrates that the properties of RSL are consistent with observed behaviors of Martian and terrestrial aeolian processes. Specifically, RSL are well-explained as flows of sand that remove a thin coating of dust. Observed RSL properties are supportive of or consistent with this model, which requires no liquid water or other exotic processes, but rather indicates seasonal aeolian behavior. These settings and behaviors resemble features observed by rovers and also explain the occurrence of many slope lineae on Mars that do not meet the strict definition of RSL. This indicates that RSL can be explained simply as aeolian features. Other processes may add complexities just as they could modify the behavior of any sand dune.

Icarus↗
USGS2020

Sparse subsurface radar reflectors in Hellas Planitia, Mars

Geomorphological features potentially related to subsurface ice, such as scalloped depressions, expanded craters, pedestal craters, and banded terrain, are present in and around Hellas Planitia, Mars. We present a radar survey of the region using the Shallow Radar (SHARAD) instrument on board the Mars Reconnaissance Orbiter (MRO) to identify candidate subsurface reflectors that may be due to the presence of potentially ice-rich deposits. We found that the majority of radar returns are likely from off-nadir surface topography (“clutter”), arising from the rough topography of the region. There is no widespread radar return from any subsurface interfaces. However, we identify a group of six reflectors adjacent to each other on a plateau in Malea Patera in which we have higher confidence. Landforms associated with a likely ice-rich mantle are associated with the plateau, but the thickness of this mantle does not correspond to the expected depth of the reflectors. However, layers beneath the mantle and marginal pitting at the edge of the plateau are similar to those associated with pedestal craters, which may be ice rich and are a similar thickness to the expected depth of the reflectors. Malea Patera has been interpreted to be a volcanic caldera, so the reflectors may be associated with a volcanic deposit within the plateau, although the evidence for this is inconclusive. Because this radar detection is localized and its origin ambiguous, we cannot use it to make conclusions about the thickness of subsurface deposits in the Hellas region as a whole. The lack of widespread radar reflectors in this region, as compared to the northern mid-latitudes where extensive radar reflections have been mapped, may be due in part to higher surface roughness, which creates radar clutter that may obscure subsurface reflectors. However on the southern rim of the basin and south of the basin, the lack of reflectors may indicate that the possible ice-rich deposits observed geomorphologically in this region are too thin to be resolved by SHARAD, are dielectrically similar to the underlying unit, or have a gradual vertical transition in ice content that is not reflective for the radar. This would imply that recent climate processes may have favored widespread, thick ice deposition or preservation in the northern hemisphere as compared to the southern hemisphere.

Icarus↗
USGS2020

Thicknesses of lava flows in satellite images: Comparison of layered mare units with terrestrial analogs

Recent advances in satellite imaging technology have greatly improved our observations of planetary surfaces. The Lunar Reconnaissance Orbiter (LRO) Narrow Angle Camera (NAC) records images with resolutions on average of 0.5 m per pixel, resolving meter scale features on the surface of the Moon. NAC images have revealed layered deposits, interpreted to be sequences of mare basalt flows, in the walls of impact craters on the lunar nearside. However, caution must be exercised in the interpretation of surface processes from morphologies of features that are close to the limits of detectability. Our goal is to quantify where that limit is for lava flow stratigraphy. Here we report on a terrestrial analog study conduced to better constrain limitations in the measurements of thicknesses of lava flows observed in high-resolution satellite-collected images. Using WorldView-2 satellite images, we mapped layered basalt flows at three sites in the Wai'anae and Ko'olau Ranges of O'ahu, Hawai'i. Fieldwork conducted at these sites allowed for assessment of the accuracy of image interpretations. We found that flow thickness estimates made using WorldView-2 images overestimated thicknesses of individual lava flows measured in the field at all eight locations visited by a factor of 1.2 to 3.5. A primary reason for this overestimation by remote sensing analysis is that many outcropping “layers” within a transect contain more than one individual flow, a distinction that is not visible in satellite images. However, the mean thickness of the layers seen in the orbital data was 0.8 to 1.7 times the outcrop thickness measured in the field, suggesting that the remote measurements should be considered estimates of the outcrop thickness rather than the thickness of individual lava flows. Measurements of layered lunar mare lava units in LRO NAC images provided layer thicknesses that ranged from <1–6 times greater than those derived from images of the O'ahu study sites. It is reasonable to expect that many lunar outcrops similarly contain more than one individual flow and display similar outcropping patterns. This suggests that many current estimates of layer thicknesses derived by comparable methods actually correspond to outcrop thicknesses. Current interpretations of lava flow thicknesses derived from planetary images should be considered maximums for individual flow thicknesses with uncertainties that may be as high as a factor of 3 or more.

Hawaii↗
USGS2021

Exposure of an early to middle Noachian valley network in three dimensions on Mars

We document a set of channels in a section of the Martian cratered highlands located between crustal massifs northeast of Hellas Planitia that are visible in cross section and planview >200 m below the surface. The morphometry and spatial distribution of the outcrops provide concrete geological evidence of a dynamic aqueous system in a structural sub-basin during the Early to Middle Noachian, bolstering evidence of conditions compatible with sustained liquid water on the surface very early in Mars' history.

Icarus↗
USGS2023

Morphology and paleohydrology of intracrater alluvial fans north of Hellas Basin, Mars

Alluvial fans and sinuous ridges are both important records of the history of fluvial activity on Mars, and they often occur together. We present observations of alluvial fans, many of which exhibit inverted relief, in five craters in the region north of Hellas basin. The observed fans ranged in size from ~10 to 820 km 2 . We identified three primary fan surface morphology classes (chute, degraded, and Inverted) as well as many instances where the morphology transitions from proximal chutes (or, rarely, a cratered degraded surface) to distal ridges corresponding to increasing thermal inertia. Clear superposition relationships at contacts between adjacent fans are rarely observed, suggesting interfingered deposits and concurrent fan development across the region. Localized factors appear to influence fan development as there is no systematic trend in the azimuth range of fan location, size of fan or catchment, as well as the degree of crater filling. Water and sediment availability may be controlled by lithology differences and weather patterns. Many of the fans had a mismatch between catchment and fan volume, corresponding to significant amounts of erosion perhaps due to windblown stripping of fine sediment. However, several notable fans exhibited volumes greater than their corresponding catchments. This may reflect uncertainty in the accuracy of the estimated paleosurface, or it may indicate sediment contributions to the fan from outside the mapped catchment. Ridges, inferred to be the resistant remnants of fluvially transported deposits, were used to estimate flow magnitude in fan construction with computed discharges of 60–400 m 3 /s and corresponding supply rate runoff values ~1–20 mm/h. Acknowledging that width-derived discharge values may overestimate flow conditions due to the likelihood of amalgamated channel deposits, this quantification provides important climate constraints. The upper range of runoff values and discharge rates are quite high, and would require either intense rain storms to generate immediate runoff, or longer-term snow accumulation and subsequent melt-runoff, potentially enhanced by rain-on-snow events. Minimum continuous formation time scales of less than a century are computed, but are incompatible with fan morphology (e.g., superposition relationships, embedded craters) and mechanisms to sustain flows. More realistic lower-limit fan construction times, accounting for modeled precipitation rates from the literature, are tens to hundreds of thousands of years. Fans were active in multiple events spanning the Hesperian to Amazonian periods, requiring transient climate conditions to support the fan aggradation.

Icarus↗
USGS2022

Martian gully activity and the gully sediment transport system

The formation process for Martian gullies is a critical unknown for understanding recent climate conditions. Leading hypotheses include formation by snowmelt in a past climate, or formation via currently active CO 2 frost processes. This paper presents an expanded catalog of >300 recent flows in gullies. The results indicate that sediment transport in current gully flows moves the full range of materials needed for gully formation. New flows are more likely to transport boulders in gullies that have pre-existing boulder-covered aprons, indicating that current flows are transporting the same materials required for gully formation overall. The distribution of gully activity frequencies can be described by a power law and indicates that the recurrence intervals for flows in individual gullies are commonly tens to hundreds of Mars years. Over the last ~300 kyr, climate variations have been modest but individual gullies have had tens to thousands of flow events. This could be sufficient to account for the entirety of gully formation in some cases, although the same processes are likely to have occurred further in the past. For any gullies that may have initiated under higher-obliquity conditions, this level of recent activity indicates that the observable morphology has been shaped by CO 2 -driven flows. These observations of sediment transport and the tempo of gully activity are consistent with gully formation entirely by CO 2 frost processes, likely with spatial and temporal variability, but with no role required for liquid water.

Icarus↗