Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Gas Science and Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,693 records · Page 18Linked to original sources
USGS1999

Comparison of two approaches for determining ground-water discharge and pumpage in the lower Arkansas River Basin, Colorado, 1997-98

In March 1994, the Colorado Division of Water Resources (CDWR) adopted “Rules Governing the Measurement of Tributary Ground Water Diversions Located in the Arkansas River Basin” (Office of the State Engineer, 1994); these initial rules were amended in February 1996 (Office of the State Engineer, 1996). The amended rules require users of wells that divert tributary ground water to annually report the water pumped monthly by each well. The rules allow a well owner to report the pumpage measured by a totalizing flowmeter (TFM) or pumpage determined from electrical power data and a power conversion coefficient (PCC) (Hurr and Litke, 1989). Opinions by representatives of the State of Kansas, presented before the Special Master hearing a court case [State of Kansas v. State of Colorado, No. 105 Original (1996)] concerning post-Compact well pumping, stated that the PCC approach does not provide the same level of accuracy and reliability as a TFM when used to determine pumpage. In 1997, the U.S. Geological Survey (USGS), in cooperation with the CDWR, began a 2-year study to compare ground-water pumpage estimates made using the TFM and the PCC approaches. The study area was along the Arkansas River between Pueblo, Colorado, and the Colorado-Kansas State line (fig. 1). The two approaches for estimating ground-water discharge and pumpage were compared for more than 100 wells completed in the alluvial aquifer of the Arkansas River Basin. The TFM approach uses an inline flowmeter to directly measure instantaneous discharge and the total volume of water pumped at a well. The PCC approach uses electrical power consumption records and a power conversion coefficient to estimate the pumpage at ground-water wells. This executive summary describes the results of the comparison of the two approaches. Specifically, (1) the differences in instantaneous discharge measured with three portable flowmeters and measured with an inline TFM are evaluated, and the statistical differences in paired instantaneous discharge between the two approaches are determined; (2) short- and long-term variations in the PCC’s are presented; (3) differences in pumpage between the two approaches are evaluated, and the statistical differences in pumpage between the two approaches are determined; (4) potential sources of discrepancy between pumpage estimates are discussed; and (5) differences in total network pumpage using the two approaches are presented. During the irrigation seasons of 1997 and 1998, instantaneous discharge and electrical power demand were measured at randomly selected wells to determine PCC’s. At more than 100 wells, the PCC’s determined during the 1998 season were applied to total electrical power consumption data that was recorded between the initial and final readings at each network well site in 1998 to estimate total ground-water pumpage. At each site, an inline TFM was installed in a full-flowing, acceptable test section of pipe on the discharge side of the pump where the measurement of discharge was made. Measurements of instantaneous ground-water discharge also were made using three different types of portable flowmeters. The average velocity multiplied by the cross-sectional area of the discharge pipe was used to compute the discharge in gallons per minute. Whenever possible, discharge measurements were made at each network site using all three types of portable flowmeters.

Colorado↗
USGS1976

Medicine Lodge thrust system, east-central Idaho and southwest Montana

The Medicine Lodge thrust system, exposed in east-central Idaho and southwest Montana, is a major segment of the North America Cordilleran fold and thrust belt on which Precambrian and Paleozoic rocks have been telescoped and transported far east of their depositional area. The fault has overlapped rocks that initially were deposited in differing sedimentary environments on opposite sides of the northwest-trending geanticlinal Lemhi arch. The nature of the arch itself has been obscured by later thrusting, but it can be roughly reconstructed as a major landmass recurrently uplifted from Precambrian Y time at least through the Mesozoic. Although sections of the large landmass have been identified in the past as small islands, it was instead a southern extension of Belt island, and exerted a major influence on sedimentation patterns. The thrust has obscured recognition of correlative sedimentary rock units. It also appears to have controlled the distribution of volcanic rocks in satellite centers of the main field of Challis Volcanics. The thrust system has exerted a major influence on the emplacement of granodiorite-quartz monzonite stocks and related mineral deposits in east-central Idaho. Recognition of the fault as a major influence in intrusive activity and deposition of metallic mineral deposits suggests new possibilities for mineral resource exploration in this region. And consideration of the stratigraphic, paleogeographic, and structural framework of sedimentary rocks beneath the thrust suggests the possibility of petroleum and natural gas resources in the region north of the Snake River Plain.

Idaho, Montana↗
USGS2025

Refining the earthquake history of south-central Alaska through lake records

The Alaska–Aleutian subduction zone (AASZ) is one of the world's most seismically active plate boundaries and the source of the 1964 M w 9.2 Great Alaska earthquake–the second largest instrumentally recorded earthquake in the world. Understanding the nature and frequency of such earthquakes is necessary for seismic and tsunami hazard assessment, but instrumental and historical records that span less than 150 years are too short to allow a statistically reliable analysis of earthquake recurrence times. This calls for studies of evidence of past earthquakes, extending the earthquake catalog further back in time. Subduction-zone paleoseismology in south-central Alaska is predominantly based on coastal evidence of land-level changes and tsunamis generated by megathrust earthquakes and preserved in the geological record. A complementary approach is lacustrine paleoseismology, which is still a relatively young discipline in Alaska. However, globally, lake basins are well-established high-resolution and continuous recorders of paleoseismic activity along subduction zones, relying on the identification of underwater landslide deposits and turbidites generated by seismic shaking. As a result, lake basins not only register ground shaking from megathrust earthquakes, but also from intraslab and crustal earthquakes, which are typically not accompanied by significant land-level changes. In this review paper, we combine coastal and lacustrine paleoseismology approaches to refine the south-central Alaskan earthquake history by comparing the paleoseismic records from two lakes (i.e., Eklutna Lake, located in the Chugach Mountain Range, and Skilak Lake, situated on the Kenai Peninsula) with the coastal and crustal earthquake catalog in Alaska. The resulting age ranges of all known megathrust earthquakes involving the Alaskan megathrust between the Kodiak and Prince William Sound (PWS) sections are more precise and accurate for the last 1.3 kyrs BP than the previously published age ranges from coastal records. As a result, this study supports the following key conclusions: (1) The 1964 CE earthquake was an exceptionally strong and unique event in the last 2000 years, rupturing the PWS, Kenai, Barren Islands, and Kodiak sections simultaneously. (2) The high-resolution and seasonal markings of the varved lake records now disentangle for the first time closely timed earthquakes, which was not possible based on the coastal evidence alone. (3) No persistent megathrust rupture boundaries exist. So, the possibility of a full rupture of the entire eastern AASZ, from PWS to Semidi cannot be excluded. (4) The rupture pattern in the eastern AASZ reveals superimposed cycles of multi-asperity ruptures (1964 earthquake) and clustered complementary partial ruptures, or rupture cascades. (5) The PWS section hosts the largest asperity in the eastern AASZ. (6) The shaking record of megathrust earthquakes indicates a time-dependent (quasiperiodic) behavior for the study area, but the observation of complementary clusters means that the hazards will not drop to zero but instead may even increase for a neighboring section. (7) The time-independent behavior of intraplate earthquakes implies that the intraslab hazard did not decrease following the 2016 and 2018 earthquakes. This study utilizes an integrated approach for subduction zone paleoseismology as a solution for unraveling recurrence and rupture patterns in Alaska, which can be applied worldwide.

Alaska↗
USGS2025

Factors regulating the potential for freshwater mineral soil wetlands to function as natural climate solutions

There are increasing global efforts and initiatives aiming to tackle climate change and mitigate its impacts via natural climate solutions (NCS). Wetlands have been considered effective NCS given their capacity to sequester and retain atmospheric carbon dioxide (CO 2 ) while also providing a myriad of other ecosystem functions that can assist in mitigating the impacts of climate change. However, wetlands have a dual impact on climate, influencing the atmospheric concentrations of both CO 2 and methane (CH 4 ). The cooling effect associated with wetland CO 2 sequestration can be counterbalanced by the warming effect caused by CH 4 emissions from wetlands. The relative ability of wetlands to sequester CO 2 versus emit CH 4 is dependent on a suite of interacting physical, chemical, and biological factors, making it difficult to determine if/which wetlands are considered important NCS. The fact that wetlands are embedded in landscapes with surface and subsurface hydrological connections to other wetlands (i.e., wetlandscapes) that flow over and through geochemically active soils and sediments adds a new layer of complexity and poses further challenges to understanding wetland carbon sequestration and greenhouse gas fluxes at large spatial scales. Our review demonstrates how additional scientific advances are required to understand the driving mechanisms associated with wetland carbon cycling under different environmental conditions. It is vital to understand wetland functionality at both wetland and wetlandscape scales to effectively implement wetlands as NCS to maximize ecological, social, and economic benefits.

Wetlands↗
USGS2025

Foundational uncertainties in terminal Ediacaran chronostratigraphy revealed by high-precision zircon U-Pb geochronology of the Nama Group, Namibia

The Nama Group of southern Namibia and northwestern South Africa hosts the best-dated mixed carbonate-siliciclastic foreland basin succession of the terminal Ediacaran [ca. 551 million years (Ma) ago to <538 Ma] and is key for resolving the chronology of early metazoan evolution. Numerous silicified volcanic tuff interbeds are present, but differing interpretations regarding the fidelity of their ages lead to different regional stratigraphic correlations, especially for the Urusis Formation of the Schwarzrand Subgroup. An expanded record of the Urusis Formation is found in the Swartpunt area of southern Namibia, which has yielded an important metazoan biota. But the succession in this area is preserved as a series of thrusts at the leading edge of the Gariep orogenic belt and zircon U-Pb data show systematic age repetition. We use regional stratigraphic and structural mapping, integrated with carbonate carbon isotope (δ 13 C carb ) chemostratigraphy and high-precision radioisotope U-Pb zircon geochronology from outcrop and recently acquired drill core to develop a temporally calibrated basin-wide depositional model. This integrated dataset either reflects complex zircon reworking, inheritance, or potential analytical biases (Scenario 1) or the presence of a Gariep-related cryptic décollement within the Spitskop Member that has resulted in stratigraphic repetition (Scenario 2). We investigate the evidence for and against both scenarios and consider their implications for stratigraphic and δ 13 C carb correlations between the Swartpunt area and coeval exposures along the Orange River border with South Africa. Given that these issues are in an area that hosts numerous silicified ash beds and extensive exposure, an inability to confidently discount either scenario highlights a level of compounding uncertainty in zircon U-Pb geochronology that must be considered when attempting to build global chronostratigraphic frameworks. Scenario 1 implies that some of the weighted mean ages and Bayesian eruption ages from the Swartpunt area may be >1 Myr older than the depositional age of their respective ash beds when assuming existing stratigraphic correlations. If this scenario is preferred, then a cautious approach would be to consider all weighted mean zircon U-Pb ages from ash beds to reflect maximum depositional ages. Both scenarios support deposition of the Huns Member >540 Ma in the Swartpunt area if the oldest weighted mean age reported here represents a near-depositional age, which has significant implications for the temporal calibration of important terminal Ediacaran ichnofossil assemblages and future cyclostratigraphic studies. Stratigraphic correlations common to both scenarios allow us to temporally calibrate a basin evolution model for the Nama Group. Temporal trends in initial hafnium isotope (εHf) compositions of zircon grains from ash beds throughout the succession may support progressive crustal thickening associated with underplating of the Damara orogenic belt along the northern periphery of the Kalahari craton from ca. 547 Ma to ca. 538 Ma. The compilation of new and published zircon U-Pb ages may also imply that the locus of carbonate platform development migrated from north to south (present co-ordinates), tracking the migration of foredeep subsidence.

Earth-Science Reviews↗
USGS2026

Reconstructing the Quaternary depositional history using geologic mapping and three-dimensional modeling of the subsurface near Fort Morgan, northeastern Colorado

Centered on Fort Morgan, Colorado, this study is intended to build from previous work by adding a three-dimensional (3D) view of the subsurface to better understand the depositional history of Quaternary deposits. A 1:100,000 scale geologic map was made by combining previous geologic maps, regional soil maps, and recent field investigations. In addition to the geologic mapping, drill hole lithologic data from water wells and oil and gas exploration were compiled and lithologic units simplified to best represent the stratigraphy of the Quaternary deposits. From these subsurface data, a 3D subsurface model was constructed, trimmed at the surface by a digital elevation model, and a bedrock surface foundation gridded from drill hole data was added. The surface of the 3D model was then compared visually to the surficial geologic map. Cross sections were constructed from the 3D model and compared to site-specific drilling that was done as part of this project. Finally, the model was examined in detail to reconstruct the depositional history of the subsurface alluvial and eolian units. Alluvial and fluvial drainage basins exposed in the subsurface have a greater areal extent than the present-day narrow drainages. Older eolian sand in the subsurface tends to be interbedded with loess indicating coeval deposition. Holocene sand, both eroded from bedrock exposed at the surface north of the study area and reworked from the South Platte River, buries most of the interbedded older sand and loess.

Colorado↗
USGS2024

System characterization report on the Earth Surface Mineral Dust Source Investigation (EMIT) sensor

Executive Summary This report addresses system characterization of the Earth Surface Mineral Dust Source Investigation (EMIT) sensor, an imaging spectrometer developed by the National Aeronautics and Space Administration. This report is part of a series of system characterization reports produced and delivered by the U.S. Geological Survey Earth Resources Observation and Science Cal/Val Center of Excellence. These reports present and detail the methodology and procedures for characterization; present technical and operational information about the specific sensing system being evaluated; and provide a summary of test measurements, data retention practices, data analysis results, and conclusions. The Earth Resources Observation and Science Cal/Val Center of Excellence system characterization team completed data analyses to characterize the geometric (interior and exterior) and radiometric performances. Results of these analyses indicate that the EMIT sensor has a band-to-band geometric performance in the range of −0.355 to 0.210 pixel with a few exceptions of shortwave infrared channels. Geometric offset relative to the Landsat 8 Operational Land Imager ranged from −15.966 meters (−0.266 pixel) to 43.844 meters (0.731 pixel). Offset of a radiometric comparison ranged from −0.016 to 0.025, and slope of a radiometric comparison ranged from 0.837 to 0.985. EMIT agreed with Radiometric Calibration Network measurements within 5 percent across most of the spectral channels.

Open-File Report↗
USGS2025

Petrogenesis and mineralization potential of spinifex komatiitic basalts in the Bradley Peak greenstone terrane, Wyoming Province

Komatiitic volcanic rocks are important hosts of Ni sulfide mineralization and record early Earth evolution; however, those in the well-studied Archean Wyoming Province have received little attention. Here, we elucidate the timing and petrogenesis of the Bradley Peak komatiitic volcanic rocks using field and textural observations, geochronology, and geochemistry. Detrital and igneous zircon U-Pb ages for two samples from previously undated units support published age determinations, placing the eruption age at 2.72 Ga. Stratigraphy of the volcanic flows was mapped and 36 samples including cumulates, greenschists, and spinifex-textured rocks were collected. Whole-rock geochemistry was used to classify the spinifex-textured samples as Al-undepleted komatiitic basalts (11–17 wt% MgO). Platinum-group element concentrations (n = 25) are like those in global Al-undepleted komatiitic basalts, and PGE/Ti ratios do not indicate the volcanic flows likely host sulfide mineralization. Initial ε Nd values of −0.5 to +4.7 (n = 16), indicate that these lavas were derived from a depleted mantle source and have negligible evolved crust contamination. The primary magma to the komatiitic basalt flows is estimated to have had 19 wt% MgO and be derived from ∼15 to 25 % mantle partial melting at 3–4 GPa. Trace element chemistry and thermodynamic modeling suggest the primary melt assimilated local banded iron formation. Although the Bradley Peak komatiitic basalts do not contain positive evidence of magmatic sulfide deposits, depleted Au in the flows suggests they could be source rocks for nearby orogenic gold deposits.

Wyoming↗
USGS2026

Prioritizing resource protection and understanding potential susceptibility of springs to surficial changes in a low-temperature geothermal system

Geothermal systems are vulnerable to changes in water budget and composition, requiring science-based management. This study uses a dataset of spring water temperatures, time series of groundwater residence time tracers (tritium and carbon-14), and stable isotopes of water to understand geothermal flow in a low-temperature geothermal system in north west Colorado, United States (Steamboat Springs). The geothermal system is bisected by the Yampa River, necessitating a stream mass balance approach to quantify total discharge. Time series analysis of water temperature data provides a ranked list of features more susceptible to surficial changes, which is corroborated using time series of tritium which indicate spatially distinct patterns of mixing between modern and pre-modern groundwater. All springs contain a portion of pre-modern groundwater that is thousands to tens of thousands of years old, a period coinciding with melting of extensive Pleistocene glaciers that was likely one of the recharge sources to the geothermal system. Stream mass balance indicates that greater than 80% of the total geothermal discharge is derived from diffuse or small springs, highlighting the extensive nature of the geothermal outflow zone and the association with local geologic structures. This study provides baseline data to support management of the Steamboat Springs geothermal system and indicates the utility of these approaches in developing science-based geothermal management.

Colorado↗
USGS2025

A 700-year rupture sequence of great eastern Aleutian earthquakes from tsunami modeling of stratigraphic records

Great Aleutian underthrusting earthquakes produced destructive tsunamis impacting Hawaiʻi in 1946 and 1957. Prior modeling of the 1957 tsunami deposit and runup records on eastern Aleutian and Hawaiian Islands jointly with tide-gauge observations across the Pacific Ocean constrained a rupture model with shallow slip up to 26 m along 600 km of the plate boundary. Here we implement this modeling approach to older deposits and show alternating deep and shallow megathrust slip up to 26, 32, and 22 m for great earthquakes along the same segment in the 18 th , 15 th , and 14 th centuries. All three modeled prehistoric Aleutian earthquakes produce tsunami inundation in Hawaiʻi with the most severe, 14 th century event having impacts exceeding the 1957 event. The along-dip variability of these four ruptures spanning seven centuries provides insights on earthquake cycles for engineering design and hazard assessment. The 15 th century and 1957 rupture models provide evidence for recurrence of tsunami earthquakes, which can produce disproportionately large tsunamis for a given moment magnitude due to reduced rigidity in the shallow megathrust. The 14 th and 18 th century events likely ruptured deeper regions that did not slip in 1957, suggesting potential for corresponding deeper failure in the next great eastern Aleutian earthquake.

Alaska, Hawaii↗
USGS2026

Orientation dependence of probabilistic seismic hazard estimates from CyberShake physics-based simulations

Earthquake ground‐motion intensities, such as pseudospectral accelerations (SAs), can vary significantly with horizontal orientation. However, conducting probabilistic seismic hazard analysis (PSHA) for each horizontal orientation is challenging because current ground‐motion models used in PSHA consider only a single horizontal intensity value, usually the median across all orientations, known as RotD50. To address this limitation, we employ physics‐based simulations for PSHA, which contain full waveforms from which ground‐motion intensities can be computed for all horizontal orientations to study directional seismic hazard. We apply our approach to the latest CyberShake study of the Greater Los Angeles metropolitan area, developed by the Statewide California Earthquake Center, finding that seismic hazard at a 2475‐yr return period, a common value used for earthquake‐resistant design, varies significantly with horizontal orientation. For instance, for SAs at 3 s, the maximum seismic hazard across all horizontal orientations is, on average, 15% higher than the median RotD50 hazard, with these differences becoming more pronounced at longer periods. These observed variations can generally be attributed to physical mechanisms that polarize seismic waves, such as the radiation pattern of the earthquake source and the influence of the subsurface structure. These results may have important implications for earthquake engineering applications, particularly for long‐period structures in areas with substantial horizontal variations in seismic hazard.

California↗
USGS2024

High resolution identification and quantification of diffuse deep groundwater discharge in mountain rivers using continuous boat-mounted helium measurements

Discharge of deeply sourced groundwater to streams is difficult to locate and quantify, particularly where both discrete and diffuse discharge points exist, but diffuse discharge is one of the primary controls on solute budgets in mountainous watersheds. The noble gas helium is a unique identifier of deep groundwater discharge because groundwater with long residence times is commonly enriched in helium. In this study, a portable mass spectrometer was used to measure longitudinal variation in dissolved helium concentrations in two mountainous rivers at high spatial resolution not feasible with traditional sampling techniques. Helium profiles were then simulated using a mass-balance model to quantify longitudinal variation in groundwater discharge to the receiving rivers. Results indicate helium concentrations were enriched by multiple orders of magnitude above atmospheric equilibrium in both rivers and that this persisted for up to 18 km below observed pulse inputs in the Colorado River. Helium mass-balance models match observed longitudinal patterns with the exception of sharp initial increases in helium observed in the rivers. Increased longitudinal groundwater discharge rates correspond to mapped geologic structures in both watersheds that likely transport deep geothermal water. Models show variable sensitivity to spatial assignment of input variables representing the groundwater source, illustrating the importance of collecting data from discrete groundwater discharges where possible. The methodology shows promise for field experiments designed to assess air–water exchange rates and to quantify total groundwater discharge from a combination of discrete and diffuse sources.

Colorado, Utah↗
USGS2026

Albuquerque Seismological Laboratory strategic vision

This circular presents a strategic outlook for the U.S. Geological Survey (USGS) Albuquerque Seismological Laboratory (ASL) for the next 10 years (2026–36). The ASL is a USGS field office in the Geological Hazards Science Center that operates portions of the Advanced National Seismic System and the Global Seismographic Network and focuses on fundamental research for instrumentation testing and data quality. The strategic outlook is categorized into two types of tasks: “Foundational Tasks” and “Aspirational Tasks.” Foundational Tasks are those that maintain the laboratory’s basic operations and services, including regional and global seismic monitoring, improving data quality, and providing instrument testing and support. A suite of Aspirational Tasks is also articulated; these can be considered priority targets of ASL that could improve ASL’s seismic monitoring capabilities and mission. Such tasks include improvements to remote stations, testing capabilities of nonseismic geophysical instruments, detection threshold monitoring, rapid aftershock deployments, and expanding seismic monitoring networks. This report was written with input from the USGS Geological Hazards Science Center, the USGS Earthquake Hazards Program (EHP), and colleagues with an interest in the work done by the ASL. Although the details of these tasks may change, this document can provide guidance on the overarching tasks at the ASL from 2026 to 2036 and an overview of the various components of the ASL and how they fit into the EHP and the Global Seismographic Network Program.

Circular↗
USGS1976

An environmental assessment of impacts of coal development on the water resources of the Yampa River basin, Colorado and Wyoming; Phase I work plan

Coal resources of the western United States are being developed at ever-increasing rates, causing concerns of the effects of mining and associated activities on the environment. The Yampa River basin in northwestern Colorado and south-central Wyoming is undergoing economic development of its coal, oil and gas, and uranium resources. The Yampa River basin assessment is a 21-year program of the U.S. Geological Survey. It is designed primarily to assess the availability and quality of the basin's water resources. The basin assessment also will evaluate potential environmental and selected socioeconomic impacts of energy-resource development plans proposed by mining and power companies. This report serves as a project work plan for the basin assessment's first-phase work activities. Economic development in the Yampa River basin will result in higher levels of residuals (noneconomic byproducts) being discharged into the environment. Residuals-management encompasses the technological and economic interrelationships that should be considered in order to comply with Federal and State environmental-control regulations regarding air quality, water quality, and disposal of solid wastes. The basin assessment, the first phase that is described by this report, is designed to provide Federal, State, and local decision-makers with the basic environmental information needed to formulate and to evaluate policies for the development of energy resources. The techniques applied and conclusions reached in the Yampa River basin assessment should aid similar studies of other energy-rich basins in the western United States.

Colorado, Wyoming↗
USGS2025

Multi-scale geophysical imaging of a hydrothermal system in Yellowstone National Park, USA

Little is known about the local plumbing systems that fuel Yellowstone’s famous hot springs, geysers and mud pots. A multi-method, multi-scale geophysical investigation was carried out in the Obsidian Pool Thermal Area (OPTA) to: (i) delineate the lateral extent of the hydrothermal area and associated surface features; (ii) estimate the dimensions of the upflow zone and identify its main controlling structures; (iii) assess fluids circulation pathways from depth to surface. Ground and airborne geophysical data were acquired to connect local and regional scales, from shallow to large depths. Maps of surface electrical resistivity show a strong correlation with hydrothermal features. At in-termediate depths, electrical resistivity permits delineating the upper limit of the upflow zone, while Poisson’s ratio highlights differences in subsurface fluid content. Combining these results with surface observations and topographic information, we speculate that differential mixing of hydrothermal and fresh water could explain the wide diversity of features observed at OPTA. Low electrical resistivity observed at large depths also suggest that a vast upflow zone, controlled by rhyolite flows and conjugate faults, underlies the OPTA. We speculate that hydrothermal fluids rise along fractures and reach the surface in topographic lows to form hydrothermal features. Our results show that synoptic, multi-scale geophysical measurements provide a roadmap for understanding where and how geologic heterogeneity, topography, fluid-gas separation, and the mixing of thermal and meteoric waters conspire to produce the wide variety of Yellowstone’s renowned hydrothermal features.

Wyoming↗
USGS2024

Forecasting storm-induced coastal flooding for 21st century sea-level rise scenarios in the Hawaiian, Mariana, and American Samoan Islands

Oceanographic, coastal engineering, ecologic, and geospatial data and tools were combined to evaluate the increased risks of storm-induced coastal flooding in the populated Hawaiian, Mariana, and American Samoan Islands as a result of climate change and sea-level rise. We followed a hybrid (dynamical and statistical) downscaling approach to map flooding due to waves and storm surge at 10-square meter resolution along all 1,870 kilometers of these islands’ coastlines for annual (1-year), 20-year, and 100-year return-interval storm events and +0.00 meter (m), +0.25 m, +0.50 m, +1.00 m, +1.50 m, +2.00 m, and +3.00 m sea-level rise scenarios. We quantified the coastal flood depths and extents using the latest climate forcing from Intergovernmental Panel for Climate Change’s Sixth Assessment Report Coupled Model Intercomparison Project. The data generated using these methods provide stakeholders and decision makers with a spatially explicit, rigorous valuation of how, where, and when climate change and sea-level rise increase coastal storm-induced flooding to help identify areas where management and (or) restoration could potentially help reduce the risk to, and increase the resiliency of, the coastal communities in the populated Hawaiian, Mariana, and American Samoan Islands.

Hawaii↗
USGS2026

Rewilding the upper Klamath River Basin: Rapid recolonization of Chinook salmon following the world’s largest dam removal

Habitat fragmentation is a global driver of decline in biodiversity, yet evaluations of ecological response following re-connection remain rare. In 2024, four hydroelectric dams on the Klamath River were removed, reconnecting over 640 km of anadromous habitat and marking the largest dam removal project completed to date. We used a stationary high-resolution multi-beam imaging SONAR to quantify adult Chinook salmon ( Oncorhynchus tshawytscha ) passage into newly reopened reaches during the first two migratory seasons following dam removal. An estimated 7,742 (95% CI: 7,702–7,778) Chinook salmon migrated upstream in 2024 and 13,310 (95% CI: 12,876–13,733) in 2025, representing 18–19% of fish returning to the Klamath River Basin. Within this period, Chinook salmon recolonized 88% of their documented historical distribution, expanding into 345 km of reconnected habitats and reaching elevations of up to 1,250 m. Recolonization required fish to swim through dam removal sites, complex hydraulic corridors and engineered fishways, demonstrating the propensity for rapid recolonization at basin scale despite these challenges. These findings provide the first quantitative assessment of salmon response to the world’s largest dam removal and demonstrate how reconnection can catalyze large-scale recolonization in historically fragmented river networks.

California, Oregon↗
USGS2025

Detecting hidden sedimentary geothermal systems in the Upper Colorado River Basin

Geothermal resources exist in sedimentary rock where circulation of water for efficient extraction or storage of heat is possible. Except in rare instances where hot water is expressed at the land surface, sedimentary geothermal resources are hidden, so the identification of these systems is optimally accomplished using predictive subsurface modeling. An integrated approach using detailed paleogeographic interpretations, subsurface geologic mapping, and numerical modeling has produced regional geologic and temperature models for the Upper Colorado River Basin, a large watershed in central North America that contains many sedimentary basins. These models identify areas of hidden sedimentary geothermal resource potential in low temperature (<90°C), moderate temperature (90–150°C), and high temperature (>150°C) fairways across the study area. These models incorporate maps of key horizons in outcrop and the subsurface to create a robust structural framework that can be used to target favorable geology for natural or engineered permeability. This framework is populated with lithologies derived from detailed palaeogeographical maps and over 40,000 bottom hole temperature (BHT) values were used to create a calibrated three-dimensional (3D) temperature model across the region. The resulting maps serve as a regional sedimentary geothermal play fairway screening tool for evaluating different grades of sedimentary geothermal resources and for identifying areas of interest where more detailed, prospect-scale studies can be undertaken.

Arizona, Colorado, New Mexico, Utah, Wyoming↗