SEARCH · Geology Reports

Results for “Energy Economics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources

USGS2009

U.S. Department of Energy's Regional Carbon Sequestration Partnership Program: Overview

The U.S. Department of Energy (DOE) has formed a nationwide network of seven regional partnerships to help determine the best approaches for capturing and permanently storing gases that can contribute to global climate change. The Regional Carbon Sequestration Partnerships (RCSPs) are tasked with determining the most suitable technologies, regulations, and infrastructure for carbon capture, transport, and storage in their areas of the country and parts of Canada. The seven partnerships include more than 350 state agencies, universities, national laboratories, private companies, and environmental organizations, spanning 42 states, two Indian nations, and four Canadian provinces. The Regional Partnerships initiative is being implemented in three phases: ???Characterization Phase (2003-2005): The objective was to collect data on CO 2 sources and sinks and develop the human capital to support and enable future carbon sequestration field tests and deployments. The completion of this Phase was marked by release of the Carbon Sequestration Atlas of the United States and Canada-Version 1 which included a common methodology for capacity assessment and reported over 3,000GT of storage capacity in saline formations, depleted oil and gas fields, and coal seams.???Validation Phase (2005-2009): The objective is to plan and implement small-scale (<1??million tons CO 2 ) field testing of storage technologies in areas determined to be favorable for carbon storage. The partnerships are currently conducting over 20 small-scale geologic field tests and 11 terrestrial field tests.???Development Phase (2008-2018): The primary objective is the development of large-scale (>1??million tons of CO 2 ) Carbon Capture and Storage (CCS) projects, which will demonstrate that large volumes of CO 2 can be injected safely, permanently, and economically into geologic formations representative of large storage capacity. Even though the RCSP Program is being implemented in three phases, it should be viewed as an integrated whole, with many of the goals and objectives transitioning from one phase to the next. Accomplishments and results from the Characterization Phase have helped to refine goals and activities in the Validation and Deployment Phases. The RCSP Program encourages and requires open information sharing among its members by sponsoring both general workshops and meetings to facilitate information exchange. Although each RCSP has its own objectives and field tests, mutual cooperation has been an important part of the Program thus far. The primary goal of the RCSP initiative is to promote the development of a regional framework and the infrastructure necessary to validate and deploy carbon sequestration technologies within each Partnership's region. ?? 2009 Elsevier Ltd. All rights reserved.

Conference Paper↗

USGS2024

Determination and prediction of micro scale rare earth element geochemical associations in mine drainage treatment wastes

Acid mine drainage (AMD) has been proposed as a novel source of rare earth elements (REE), a group of elements that includes critical metals for clean energy and modern technologies. REE are sequestered in the Fe–Al–Mn-rich precipitates produced during the treatment of AMD. These AMD solids are typically managed as waste but could be a REE source. Here, results from AMD solids characterization and geochemical modeling are presented to determine the minerals/solid phases that are enriched in REE and identify the mechanism(s) of REE attenuation. AMD solids collected from limestone-based AMD treatment systems were subjected to sequential extraction and synchrotron microprobe analyses to characterize the binding nature of the REE. The results of these analyses indicated REEs were mainly associated with Al or Mn phases. Only selected REE (Gd, Dy) were associated with Fe phases, which were less abundant than Al and Mn phases in analyzed samples. The sequential extractions demonstrated that acidic and/or reducing extractions effectively mobilize REE from the AMD solids evaluated. The observed element associations in solids are consistent with geochemical model results that indicate dissolved REE can be effectively attenuated by adsorption on freshly precipitated Fe, Al, and Mn oxides/hydroxides. The model, which simulates dissolution of CaCO 3 and the precipitation of Fe, Al, and Mn oxides with increased pH, accurately predicts the pH dependent accumulation of dissolved REE with Al, Mn, and Fe oxides/hydroxides in the studied AMD treatment systems. The methods and results presented here can be used to identify conditions favorable for accumulation of REE-enriched AMD solids and possible passive or active treatment(s) to extract REE from AMD. This information can be used to design AMD treatment systems for the recovery of REE and is an opportunity to transform the challenges of addressing polluted mine drainage into an environmental and economic asset.

Pennsylvania↗

USGS2020

Mapping, exploration, and characterization of the California continental margin and associated features from the California-Oregon border to Ensenada, Mexico

Priority Geographic Area: Both within and outside US Exclusive Economic Zone (EEZ). California continental margin. This area includes and continues south of the geographic area captured in the Watt et al. white paper. Description of Priority Area: The California continental margin, from the narrow shelf to abyssal depths, contains diverse seafloor features that influence benthic community types, biological connectivity, and is associated with significant seafloor geohazards. These complex features include marginal basins, depositional slopes, submarine canyons, ridges, and seamounts, and seep environments as a result of fluid seeps along active faults. Water column characteristics are variable, with steep gradients in current velocities, which influence sediment transport, from depositional fans (slow flow, muddy) to submarine canyons and seamounts (high currents, rocky, rugged terrain). These features and associated environments can influence the distribution of deep-sea habitats, including coral and sponge communities. South of the region described in the Watt et al. and Demopoulos et al. white papers, plentiful seeps occur from northern California down to the southern California Borderland. However, the underlying foundational geology associated with these seeps varies along the margin, changing with contrasting tectonic settings, from convergent tectonics to regions dominated by strike-slip faulting (Barry et al. 1996; Paull et al. 2008; Bernardo and Smith 2010; Maloney et al. 2015). For seeps located off southern California, the relationship to strike-slip fault systems may influence the distribution of seep fluid expulsion sites and associated seep habitats (Maloney et al. 2015; Grupe et al. 2015; Conrad et al., 2017), where transpression plays a key role in formation and localization of fluid seeps. Further exploration is required in order to understand these connections. Several submarine canyons intersect the shelf within this region, serving as important channels of energy and transport of sediment from shelf to slope depths. Canyons are typically associated with high currents, turbidity flows, steep and rugged terrain, and high food availability, all of which structures canyon communities and supports hotspots of biodiversity. Specific canyons along the California margin that have been well studied include Scripps and La Jolla Canyons off San Diego, and Monterey Canyon off Monterey, but many more remain relatively unexplored. Commercially important species of fish and invertebrates have been found associated with canyons, as well as deep-sea corals and sponges (e.g., Barry et al. 1996). However, in contrast to their Atlantic counterparts (e.g., through ACUMEN and ASPIRE campaigns) there has been a dearth of exploration and characterization of canyons along the California margin. A number of questions remain regarding canyon and slope wall stability and associated geohazards, plus, how the canyons connect and influence the broader regional biogeography of benthic communities is unknown. Due to their topography, seamounts along the California margin are characterized by steep slopes, large areas of rocky substrate, and high currents. Hydrological complexity is associated with seamounts given they impinge different watermasses, depending on depth range. This heterogeneity yields complex and diverse benthic communities, including commercially important fishes (e.g., Tracey et al., 2012). The geology of Davidson, Pioneer, San Juan, and Rodriquez Seamounts has received considerable study (e.g., Davis et al., 2010) but other seamounts are less known, including how they are biologically and ecologically connected. For example, research comparing the benthic communities associated with Rodriguez and San Juan Seamounts, located outside of the Channel Islands National Marine Sanctuary and within the proposed Chumash Heritage National Marine Sanctuary, to communities found within the sanctuary is critical for managing and protecting resources within the sanctuary and modifying sanctuary boundaries. Exploration would yield the data needed to delineate and characterize essential fish habitats, and deep-sea coral and sponge communities, thus directly connecting the utility of exploration and discovery to decision making. The southern California Borderland is a geomorphologically heterogeneous area created by a complex network of faults, containing deep basins separated by shallow ridges and islands. Persistent fault-related deformation has created complex features, such as exposure of scarps and uplift rocks/ridges, seeps, erosional terraces, hydrate mounds, and mud volcanoes that provide support for thriving benthic communities. That said, significant oxygen minimum zones and low aragonite saturation states persist within several of the basin environments, influencing energy flow, community ecology, and calcification. For example, the combined effects of hypoxia and acidification pose serious threats to marine organisms and biological resources along the California margin. Mapping and exploration of the extensive faults and fault scarps can help constrain historical earthquake activity. But many questions remain regarding how the underlying geology and geological processes have shaped the biological communities.

California↗

USGS1962

Trace element distribution in the searchlight, Nevada quartz monzonite stock

Gold, silver, copper, and lead-bearing veins, non-radially zoned, occur just beyond the southern and western margins of the Searchlight , Nevada , quartz monzonite stock . Seven samples of the quartz monzonite and purified individual constituent minerals of the rock, representing apophyses and marginal and interior parts of the intrusive mass, were analyzed petrographically and spectrographically. A semiquantitative total-energy spectrographic method proved satisfactory for Cu, Pb, Ni, Co, Ga, Mo, Mn, Ti, V, Cr, Sr, and Zr, but too insensitive for Zn, Ag, and Au. A synthetic silicate base was used for preparation of standards and working curves. The modal trace element content of unaltered (hypothetical) quartz monzonite samples was determined from the trace element content of the purified minerals. Ferromagnesian minerals contain concentrations of Cu, Pb, Ni, Co, Mn, and Cr. Felsic minerals are low in these but high in Sr and Ga. Cu appears to have been partly released during chloritization of the mafic minerals. Ni, Cr, Zr show little difference between the unaltered (hypothetical) and actual rock. Ga, V, Mn, Sr are in lesser quantities in the altered rock. Pb and Cu also show a loss, especially nearest largest Pb and Cu producers. Pb, Cu, V occur in the spatially related veins, but Sr or Ga have not been reported to date. Pb/Cu in unaltered rock compared to altered rock is 1.6/1; past mining production ratio of Pb/Cu is 2.6/1. While further work is needed, the trace element pattern suggests a possible means of identifying a "productive" intrusive body.

Economic Geology↗

USGS2017

Rare-earth elements

The rare-earth elements (REEs) are 15 elements that range in atomic number from 57 (lanthanum) to 71 (lutetium); they are commonly referred to as the “lanthanides.” Yttrium (atomic number 39) is also commonly regarded as an REE because it shares chemical and physical similarities and has affinities with the lanthanides. Although REEs are not rare in terms of average crustal abundance, the concentrated deposits of REEs are limited in number. Because of their unusual physical and chemical properties, the REEs have diverse defense, energy, industrial, and military technology applications. The glass industry is the leading consumer of REE raw materials, which are used for glass polishing and as additives that provide color and special optical properties to the glass. Lanthanum-based catalysts are used in petroleum refining, and cerium-based catalysts are used in automotive catalytic converters. The use of REEs in magnets is a rapidly increasing application. Neodymium-iron-boron magnets, which are the strongest known type of magnets, are used when space and weight are restrictions. Nickel-metal hydride batteries use anodes made of a lanthanum-based alloys. China, which has led the world production of REEs for decades, accounted for more than 90 percent of global production and supply, on average, during the past decade. Citing a need to retain its limited REE resources to meet domestic requirements as well as concerns about the environmental effects of mining, China began placing restrictions on the supply of REEs in 2010 through the imposition of quotas, licenses, and taxes. As a result, the global rare-earth industry has increased its stockpiling of REEs; explored for deposits outside of China; and promoted new efforts to conserve, recycle, and substitute for REEs. New mine production began at Mount Weld in Western Australia, and numerous other exploration and development projects noted in this chapter are ongoing throughout the world. The REE-bearing minerals are diverse and often complex in composition. At least 245 individual REE-bearing minerals are recognized; they are mainly carbonates, fluorocarbonates, and hydroxylcarbonates (n = 42); oxides (n = 59); silicates (n = 85); and phosphates (n = 26). Many of the world’s significant REE deposits occur in carbonatites, which are carbonate igneous rocks. The REEs also have a strong genetic association with alkaline magmatism. The systematic geologic and chemical processes that explain these observations are not well understood. Economic or potentially economic REE deposits have been found in (a) carbonatites, (b) peralkaline igneous systems, (c) magmatic magnetite-hematite bodies, (d) iron oxide-copper-gold (IOCG) deposits, (e) xenotime-monazite accumulations in mafic gneiss, (f) ion-absorption clay deposits, and (g) monazite-xenotime-bearing placer deposits. Carbonatites have been the world’s main source for the light REEs since the 1960s. Ion-adsorption clay deposits in southern China are the world’s primary source of the heavy REEs. Monazite-bearing placer deposits were important sources of REEs before the mid-1960s and may be again in the future. In recent years, REEs have been produced from large carbonatite bodies mined at the Mountain Pass deposit in California and, in China, at the Bayan Obo deposit in Nei Mongol Autonomous Region, the Maoniuping deposit in Sichuan Province, the Daluxiang deposit in Sichuan Province, and the Weishan deposit in Anhui Province. Alkaline igneous complexes have recently been targeted for exploration because of their enrichments in the heavy REEs. Information relevant to the environmental aspects of REE mining is limited. Little is known about the aquatic toxicity of REEs. The United States lacks drinking water standards for REEs. The concentrations of REEs in environmental media are influenced by their low abundances in crustal rocks and their limited solubility in most groundwaters and surface waters. The scarcity of sulfide minerals, including pyrite, minimizes or eliminates concerns about acid-mine drainage for carbonatite-hosted deposits and alkaline-intrusion-related REE deposits. For now, insights into environmental responses of REE mine wastes must rely on predictive models.

Professional Paper↗

USGS1979

Investigations needed to stimulate the development of Jordan's mineral resources

The level of living that any society can attain is a direct function of the use it makes of all kinds of raw materials (soil, water, metals, nonmetals, etc.), all kinds of energy (both animate and inanimate), and all kinds of human ingenuity; and is an inverse function of the size of the population that must share the collective product. The relation between raw materials, energy and ingenuity is such that use of a large amount of one may offset the need for large amounts of others. The most vital raw materials are water, soil, and construction materials, for these are needed in large quantities and are hard to import. Metals, chemicals, and inanimate energy are necessary for industrialization. The more of these minerals a nation possess, the better, but not nation can hope to be self-sufficient in all of the m and therefore must trade for some essential materials. Jordan’s natural resources have been little explored. The grantitc-metamorphic terrane in the southeastern part of the Kingdom could contain deposits of tungsten, rare earths, feldspar, mica, fluorite etc. and the sedimentary terrane over much of the rest of the county is favorable for the occurrence of oil. Even if none of these minerals is found, however, Jordan’s other mineral resource, if fully explored and developed in the light of modern technology, will support a far higher level of living than her people now enjoy. Very likely she can increase her rainfall by about 10 percent by cloud seeding, and she undeveloped supplies in both surface and ground water that are sufficient to nearly double her usable water supply. Even if she does not have oil or have it in large quantities, she can buy it cheaply from neighboring counties, and in addition has undeveloped sources of hydroelectric power, large reserves of bituminous limestone, large reserves of nuclear power as uranium in phosphate rock, and can use solar and wind power for special purposes. Her large supplies of construction, fertilizer, and other chemical raw materials will not only satisfy her own needs, but will yield both raw materials and some manufactured products for export. And she has valuable resource of touristic interest in the form of incomparable scenery, antiquities, and holy places, which, if properly advertised, could well become her largest single source of foreign currency. Revenues obtained from this source and from the export of agricultural products, nonmetallic minerals, and mineral products should support foreign oil purchase of oil, machinery, and other products not mined or produced internally. Full development of Jordan’s economic potential will take years to achieve and involves many complex activities. One of the most essential is one that can be pressed in the early years, namely the gathering of facts and basic data concerning the character, extent, and distribution of her resources, and the uses that can be made of them. Without each fundamental data or the understanding of their meaning or the ways to use and apply them, costly developmental projects and similar efforts to raise the level of living are likely to have limited success at best. Basic data and mineral resources are best gathered and published by permanent government agencies, for private organizations and individual cannot afford to take the risks involved in gathering data that may not have an immediate economic return; and even if private parties do collect such data they are not likely to make them general available. Of the activities needed in the field of mineral resources, some are already underway as the established function of government agencies. No bureau however, seems to have responsibility for making geologic maps and for gathering data on such things as steam flow, composition and properties of minerals and rocks, or for investigating the uses to which Jordan’s minerals might be put. To satisfy these needs, a Geological Survey and a Bureau of Mineral Industries should be formed and placed in operation as quickly as possible. The task of collecting and interpreting basic data or mineral resources must be done largely by Jordanians, for only in this way will Jordan acquire the technical competence needed to use the information. Few Jordanians have enough training or experience to work independently in these fields now, however, so help from outside technicians would be necessary over an initial training period of several years. But the number of outside technicians should never exceed the number of Jordanian technicians, and for this reason, neither organization could have a staff of more than a few people during the early years of operation.

Open-File Report↗

USGS2022

Determination and prediction of rare earth element eeochemical associations in acid mine drainage treatment wastes

Acid mine drainage (AMD) has been proposed by various researchers as a novel source of rare earth elements (REE), a group of elements that include critical metals for clean energy and modern technologies. REE tend to be sequestered in the Fe-Al-Mn-rich solids produced during the treatment of AMD. These solids are typically managed as waste, but could be a low-cost, readily available REE source. Here, results from field sampling, solids characterization, and geochemical modeling are presented to identify the mechanism(s) of REE attenuation and determine the minerals/solid phases in AMD solids that are enriched in REE. This study reveals that solids produced from low-pH AMD that was passively treated by limestone contain elevated concentrations of REE with Al, Fe, and/or Mn. AMD solid characterization via sequential extraction demonstrated that Al and Mn oxides were more abundant than Fe oxides and that the REEs are mainly associated with Al/Mn phases. Additionally, sequential extractions demonstrate that for the AMD solids evaluated, acidic and/or reducing extractions are required to mobilize the REE. Finally, the “CausticTitrationREYs.exe” geochemical equilibrium model demonstrated in this study indicates that the observed dissolved REE attenuation can be explained via surface complexation on Fe, Al, and Mn oxides/hydroxides and not by REE compound precipitation. The model accurately predicts the pH dependent removal of dissolved REE and that Al and Mn oxides/hydroxides are largely responsible for dissolved REE removal for the systems evaluated. The modeling results are consistent with the characterization results that show that Al and Mn hydroxides are important hosting phases of REEs in AMD treatment systems. The results presented here can be used to identify conditions favorable for accumulation of REE-enriched AMD solids and possible chemical treatment(s) to mobilize REE. The geochemical model can be applied to active and/or passive AMD treatment systems to predict REE attenuation with Fe, Al, and Mn during treatment and what phases may be enriched in REE. This information can be used to engineer AMD systems to produce specific phases enriched in REE. The recovery of REE from AMD solids is an opportunity to transform the environmental and economical challenge of polluted mine drainage into an asset.

Conference Paper↗

USGS2003

Applied geochemistry, geology and mineralogy of the northernmost Carlin trend, Nevada

Investigations in the northernmost Carlin trend were undertaken to advance understanding of the geochemical signatures and genesis of precious metal deposits in the trend . Two fundamental geologic relationships near the trend significantly affect regional geochemical distributions: a remarkably intact lower Paleozoic stratigraphic sequence of siliceous rocks in the upper plate of the middle Paleozoic Roberts Mountains thrust, and the widespread repetition of rocks high in the upper plate during late Paleozoic thrusting that thickens the cover above mineralized rock in the lower plate. A compilation of previously published chemical analyses of 440 stream sediment samples and 115 rocks from two 7 1/2-minute quadrangles, as well as new chemical analyses of approximately 1,000 drill core samples in a 1,514 m (4,970 ft) hole through the Rodeo Creek deposit were used to construct three-dimensional element distribution models that highlight metal zonation in the mineralized systems. The Rodeo Creek deposit comprises deep Ag base-metal ± Au-mineralized rock below the Roberts Mountains thrust and contains an unusually high Ag/Au ratio greater than 30. Stacked geochemical halos related to the deposit are confined to the lower plate of the Roberts Mountains thrust and include two horizons of Hg, Cu, and Zn anomalies-as much as 180 m above the deposit-that mostly result from mercurian sphalerite. Extremely subtle indications of mineralization in the upper plate of the Roberts Mountains thrust above the deposit include arsenopyrite overgrowths on small pyrite crystals in 50- to 75-μm-wide clay-carbonate veinlets that lack alteration halos, arsenical rims on small disseminated crystal of recrystallized diagenetic pyrite, and partial replacement of diagenetic pyrite by tennantite. Some of these minerals contain anomalously high Au. However, these As-(Au)-bearing rocks most likely represent another locus of largely untested mineralized rock rather than distal halos related to either the Rodeo Creek or the nearby Dee and Storm gold deposits. Application of micromineralogic techniques helped to identify mineral assemblages that are specific to mineralization and provided an empirical foundation for interpretations of geochemical halos in the Carlin trend . District-scale geochemical patterns of several elements in stream sediments and surface rocks coincide with the northernmost Carlin trend and can be used to explore for Carlin -type deposits. Concentrations of elevated As and Sb in stream sediments (as much as 54 ppm As) have northwest-elongate lobate patterns that clearly outline the trend across a width of approximately 4 km. Arsenic contents of exposed rocks (as much as 90 ppm As) strongly correlate with As contents of derivative stream sediments, and rock contents of Sb show a somewhat lesser but nonetheless strong and similar correspondence. Factor analysis of stream-sediment data shows that those factor scores that are correlated with As, Sb, Au, and Pb also are high along the trend and suggest that mineralized rocks may be present. Although As was not detected by scanning electron microscope-energy dispersive spectrometer (SEM-EDS) studies in heavy mineral concentrates of high-As stream sediments in the Carlin trend , X-ray absorption near-edge spectra (XANES) of selected light fractions of stream sediment samples indicate that Al-bearing phases, such as gibbsite, amorphous Al oxyhydroxides, or aluminosilicate clay minerals host most of the As(V). The best fit, visually and in terms of the lowest residual, was obtained by a model compound of As(V) sorbed to gibbsite. Thus, most As in stream sediments derived from altered rock within the Carlin trend apparently is contained in light fractions. The geochemical character of young, unconsolidated, postmineral deposits that cover mineralized rocks on the Carlin trend partly results from mineralized sources along the trend . Concentration of As in the Miocene Carlin Formation shows an exceptionally well developed progressive increase to about 30 ppm As as altered rock surrounding the trend is approached. Mineralized and/or altered rock fragments probably have been shed directly into the sedimentary basin of the Carlin Formation, and migration of As, now fixed as As(V), also may have occurred in the supergene environment after material was recycled out of the Carlin Formation and into present-day gulleys.

Nevada↗

USGS2014

Defining ecological and economical hydropoweroperations: a framework for managing dam releasesto meet multiple conflicting objectives

Hydroelectric dams are a flexible source of power, provide flood control, and contribute to the economic growth of local communities through real-estate and recreation. Yet the impoundment of rivers can alter and fragment miles of critical riverine habitat needed for other competing needs such as downstream consumptive water use, fish and wildlife population viability, or other forms of recreation. Multiple conflicting interests can compromise progressive management especially with recognized uncertainties related to whether management actions will fulfill the objectives of policy makers, resource managers and/or facility owners. Decision analytic tools were used in a stakeholder-driven process to develop and implement a template for evaluation and prediction of the effects of water resource management of multiple-use systems under the context provided by R.L. Harris Dam on the Tallapoosa River, Alabama, USA. The approach provided a transparent and structured framework for decision-making and incorporated both existing and new data to meet multiple management objectives. Success of the template has been evaluated by the stakeholder governing body in an adaptive resource management framework since 2005 and is ongoing. Consequences of management of discharge at the dam were evaluated annually relative to stakeholder satisfaction to allow for adjustment of both management scenarios and objectives. This template can be applied to attempt to resolve conflict inherent in many dam-regulated systems where management decisions impact diverse values of stakeholders.

Journal of Energy Challenges and Mechanics↗

USGS1987

Instream water use in the United States: water laws and methods for determining flow requirements

Water use generally is divided into two primary classes - offstream use and instream use. In offstream use, sometimes called out-of-stream or diversionary use, water is withdrawn (diverted) from a stream or aquifer and transported to the place of use. Examples are irrigated agriculture, municipal water supply, and industrial use. Each of these offstream uses, which decreases the volume of water available downstream from the point of diversion, is discussed in previous articles in this volume. Instream use, which generally does not diminish the flow downstream from its point of use, and its importance are described in this article. One of the earliest instream uses of water in the United States was to turn the water wheels that powered much of the Nation's industry in the 18th and 19th centuries. Although a small volume of water might have been diverted to a mill near streamside, that water usually was returned to the stream near the point of diversion and, thus, the flow was not diminished downstream from the mill. Over time, the generation of hydroelectric power replaced mill wheels as a means of converting water flow into energy. Since the 1920's, the generation of hydroelectric power increasingly has become a major instream use of water. By 1985, more than 3 billion acre-feet of water (3,050,000 million gallons per day) was used annually for hydropower generation (Solley and others, 1988, p. 45)-enough water to cover the State of Colorado to a depth of 51 feet. Navigation is another instream use with a long history. The Lewis and Clark expedition journals and many of Mark Twain's novels illustrate the extent to which the Nation originally depended on adequate streamfiows for basic transportation. Navigation in the 1980's is still considered to be an instream use; however, it often is based upon a stream system that has been modified greatly through channelization, diking, and construction of dams and locks. The present (1987) inland water navigation system in the conterminous United States consists of about 12,000 miles of maintained waterways, over which about 500 million tons of cargo is carried each year (U.S. Army Corps of Engineers, 1988, p. 16). Although not so widely practiced in recent years, streams have been used to dispose of raw waste products from homes, communities, and factories. This use has been discouraged by law and public policy because of public health concerns and the damage it causes to the environment. Beginning in the mid-1960's, other instream uses gained new prominence in the water-resources arena-the assertion of a legal right to a free-flowing stream for biological, recreational, and esthetic purposes. These uses themselves, however, are not new. Riverine habitat always has produced fish, and the beauty of flowing water always has evoked a strong sense of esthetic appreciation. What is new is the emerging legitimacy and awareness of these noneconomic uses under State and Federal laws and regulations. In the past, environmental uses of flowing water were ignored, for the most part, under a long-standing legal tradition that favored offstream uses and certain instream uses that had a strong economic basis. The history of instream-flow policy debate really concerns those recently recognized types of interim uses. Although the more transitional water uses have been protected by law, the recognition of other in stream uses has resulted in substantial changes in State water laws. Although methods for determining the volume of water needed for most traditional water uses are relatively straight-forward and well-established, methods for determining water requirements for the in stream uses have been developed only recently and are continuing to evolve. Water laws that have favored the more traditional water uses, the inherent nature of conflict between instream and offstream water uses, and the special kinds of technological and philosophical problems posed by the "newer" types of instream uses are described below. Water laws that have been passed to accommodate the more recently recognized instream uses are summarized.

Report↗

USGS2019

Coal geology and assessment of resources and reserves in the Little Snake River Coal Field and Red Desert Assessment Area, Greater Green River Basin, Wyoming

The U.S. Geological Survey is studying regional-scale assessments of resources and reserves of primary coal beds in the major coal bed basins in the United States to help formulate policy for Federal, State, and local energy and land use. This report summarizes the geology and coal resources and reserves in the Little Snake River coal field and Red Desert assessment area in the Greater Green River Basin, southwestern Wyoming. These areas are contiguous and referred to as the “assessment area” in this report. The assessment area covers about 2,300 square miles of the eastern section of the 15,400-square-mile Greater Green River Basin. This area was prioritized for assessment because no comprehensive resource assessment had previously been completed in the area; abundant, previously unavailable drill hole data from cooperators and stakeholders became available; and there are active coal mines in the Greater Green River Basin area producing from some of the same formations as those found in the assessment area. Coal-bearing Eocene, Paleocene, and Upper Cretaceous formations have a composite thickness of more than 11,000 feet in the assessment area. Stratigraphic sequences that contain multiple coal beds within a formation or member are referred to as coal zones in this report. Paleogene coal beds are found within coal zones in the Eocene Wasatch Formation and the Paleocene Fort Union Formation. Cretaceous coal beds are within coal zones in the Lance, Almond, and Allen Ridge Formations. A total of 4,214 drill holes and measured sections were used to construct a geologic database for this assessment. From these data, 7 coal zones containing 55 individual coal beds were identified. Not all 55 coal beds were assessed; only those beds that were at least 3 feet thick and had at least a 2-square-mile areal extent were considered. Using a geology-based assessment methodology, the U.S. Geological Survey estimated original, available, and recoverable coal resources for 33 coal beds that met those criteria. An original resource of 73.2 billion short tons of coal was calculated for the 33 coal beds that met the criteria in the assessment area. To be considered extractable by surface mining methods, coal beds had to be equal to or greater than 3 feet thick and less than 300 feet deep. Of the 73.2 billion short tons (BST), 19.3 BST were determined to be recoverable resources, of which approximately 2.1 BST were considered as recoverable resources by surface mining methods at a stripping ratio of 10:1 or less. (defined as recoverable resources for this assessment, based on economic modeling and regional mining analogs). Recoverable resources for underground mining methods (coal 8 to 15 feet thick and between 300 and 3,000 feet deep) totaled 17.2 BST. Out of the 19.3 BST assessed as recoverable coal resources, approximately 167 million short tons (MST) were considered to be reserves. Within the 7 coal zones, the Wasatch coal zone contains an original resource of about 6.8 BST billion short tons of coal, of which 2.6 BST are considered a recoverable resource and approximately 26.7 MST are considered reserves. The Overland coal zone, in the Fort Union Formation, contains an original resource of approximately 23 BST of coal, of which 8.4 BST are considered a recoverable resource and approximately 74 MST are considered reserves. The China Butte coal zone, in the Fort Union Formation, contains an original resource of 36.2 BST of coal, of which 6.3 BST are considered a recoverable resource and approximately 5.5 MST are considered reserves. The Almond coal zone, in the Almond Formation, contains an original resource of 7.0 BST, of which approximately 2.0 BST are considered a recoverable resource and 61 MST are considered reserves. Resources were not calculated for the coal zones within the Niland Tongue of the Wasatch Formation or the Cretaceous Lance and Allen Ridge Formations because the coal beds in those zones are relatively thin, discontinuous, and have a limited areal extent.

Wyoming↗

USGS1988

Assessment of the role of bottomland hardwoods in sediment and erosion control

Drainage and clearing of bottomland hardwoods have long been recognized by the U.S. Environmental Protection Agency (EPA) and the U.S. Fish and Wildlife Service (Service) as important impacts of Federal water projects in the lower Mississippi River Valley. More recently, the water quality impacts of such projects (e.g., increases in sediments, nutrients, and pesticides) have also become of concern. In 1984, in an effort to better define problems concerning wetland losses and water degradation, EPA initiated a cooperative project with the Western Energy and Land Use Team (now the National Ecology Research Center) of the Service. Three phases of the project were identified: 1. To collect existing literature and data; 2. To select, develop, and test the utility of methods to quantify the relationships between land use, cover types, soils, hydrology, and water quality (as represented by sediment); and 3. To apply selected methodologies to several sites within the Yazoo Basin of Mississippi to determine the, potential effectiveness of various management alternatives to reduce sediment yield, increase sediment deposition, and improve water quality. Methods development focused on linking a simulation of water and sediment movement to a computerized geographic information system. We had several objectives for the resulting model. We desired that it should: 1. Estimate the importance of bottomland and hardwoods as a cover type that performs the functions of erosion and sediment control, 2. Simulate effects of proportions of ' various cover types and their specific spatial configurations, 3. Be applicable to moderately large spatial areas with minimal site-specific calibration, 4. Simulate spatial patterns of sediment loss-gain over time, and 5. Represent both sediment detachment and transport. While it was recognized that impacts and management alternatives could be sorted roughly into landscape measures and channel measures, the decision was made to focus study efforts mainly on landscape measures. Landscape measures include altered drainage and flooding patterns, altered cover types (e.g., conversion of bottomland hardwoods to agricultural crops, reforestation of cropland to bottomland hardwoods, and creation of riparian buffer strips), altered cropping and tillage patterns, altered routing of water, and creation of buffer strips along wetlands and channel margins. Channel measures include vegetative bank stabilization, grade control structures, and regulation of channel water volume and velocity. During the first year of the study, EPA decided not to fund the third phase of the project. This required considerable rescoping of the project with the result that application of the sediment mobilization, routing, and deposition models to various management alternatives and portions of the Yazoo Basin was somewhat restricted. We believe, however, that this report will provide a good understanding of the various modes of sediment mobilization, transport, and deposition within the Yazoo Basin, as well as of the role of bottomland hardwoods. The model developed in this study could be applied to a variety of management or mitigation alternatives prior to implementation to determine their relative effectiveness. Policy, political, and socio-economic consequences of any proposed management/mitigation practice, however, must ultimately be taken into consideration by those charged with management of water resources within the Yazoo Basin before any practice is implemented. This study makes no effort to judge the feasibility of management alternatives in this regard.

Report↗

USGS2012

The physical hydrogeology of ore deposits

Hydrothermal ore deposits represent a convergence of fluid flow, thermal energy, and solute flux that is hydrogeologically unusual. From the hydrogeologic perspective, hydrothermal ore deposition represents a complex coupled-flow problem—sufficiently complex that physically rigorous description of the coupled thermal (T), hydraulic (H), mechanical (M), and chemical (C) processes (THMC modeling) continues to challenge our computational ability. Though research into these coupled behaviors has found only a limited subset to be quantitatively tractable, it has yielded valuable insights into the workings of hydrothermal systems in a wide range of geologic environments including sedimentary, metamorphic, and magmatic. Examples of these insights include the quantification of likely driving mechanisms, rates and paths of fluid flow, ore-mineral precipitation mechanisms, longevity of hydrothermal systems, mechanisms by which hydrothermal fluids acquire their temperature and composition, and the controlling influence of permeability and other rock properties on hydrothermal fluid behavior. In this communication we review some of the fundamental theory needed to characterize the physical hydrogeology of hydrothermal systems and discuss how this theory has been applied in studies of Mississippi Valley-type, tabular uranium, porphyry, epithermal, and mid-ocean ridge ore-forming systems. A key limitation in the computational state-of-the-art is the inability to describe fluid flow and transport fully in the many ore systems that show evidence of repeated shear or tensional failure with associated dynamic variations in permeability. However, we discuss global-scale compilations that suggest some numerical constraints on both mean and dynamically enhanced crustal permeability. Principles of physical hydrogeology can be powerful tools for investigating hydrothermal ore formation and are becoming increasingly accessible with ongoing advances in modeling software.

Economic Geology↗

USGS2015

Critical metals in manganese nodules from the Cook Islands EEZ, abundances and distributions

The Cook Islands (CIs) Exclusive Economic Zone (EEZ) encompasses 1,977,000 km 2 and includes the Penrhyn and Samoa basins abyssal plains where manganese nodules flourish due to the availability of prolific nucleus material, slow sedimentation rates, and strong bottom currents. A group of CIs nodules was analyzed for mineralogical and chemical composition, which include many critical metals not before analyzed for CIs nodules. These nodules have varying sizes and nuclei material; however all are composed predominantly of δ-MnO 2 and X-ray amorphous iron oxyhydroxide. The mineralogy, Fe/Mn ratios, rare earth element contents, and slow growth rates (mean 1.9 mm/10 6 years) reflect formation primarily by hydrogenetic precipitation. The paucity of diagenetic input can be explained by low primary productivity at the surface and resultant low organic matter content in seafloor sediment, producing oxic seafloor and sub-seafloor environments. The nodules contain high mean contents of Co (0.41%), Ni (0.38%), Ti (1.20%), and total rare earth elements plus yttrium (REY; 0.167%), and also high contents of Mo, Nb, V, W, and Zr. Compiled data from a series of four cruises by the Japan International Cooperation Agency and the Mining agency of Japan from 1985 to 2000 were used to generate a map that defines the statistical distribution of nodule abundance throughout the EEZ, except the Manihiki Plateau. The abundance distribution map shows a belt of high nodule abundance (19–45 kg/m 2 ) that starts in the southeast corner of the EEZ, runs northwest, and also bifurcates into a SW trending branch. Small, isolated areas contain abundances of nodules of up to 58 kg/m 2 . Six ~ 20,000 km 2 areas of particularly high abundance were chosen to represent potential exploration areas, and maps for metal concentration were generated to visualize metal distribution and to extrapolate estimated metal tonnages within the six sites and the EEZ as a whole. Grades for Mn, Cu, and Ni are low in CIs nodules in areas of high abundance; however, Ti, Co, and REY show high contents where nodule abundances are high. Of the six areas identified to represent a range of metal contents, one at the northern end of the N-S abundance main belt optimizes the most metals and would yield the highest dry metric tons for Mn (61,002,292), Ni (1,247,834), Mo (186,166), V (356,247), W (30,215), and Zr (195,323). When compared with the Clarion–Clipperton Zone, the CIs nodules show higher nodule abundances (> 25 kg/m 2 over ~ 123,844 km 2 ), and are more enriched in the green-tech, high-tech, and energy metals Co, Ti, Te, Nb, REY, Pt, and Zr. The CIs EEZ shows a significant resource potential for these critical metals due to their high prices, high demand, and the high nodule abundance, which will allow for a smaller footprint for a 20-year mine site and therefore smaller environmental impact.

Ore Geology Reviews↗

USGS2018

A practical primer on geostatistics

Introduction The Challenge —Most geological phenomena are extraordinarily complex in their interrelationships and vast in their geographical extension. Ordinarily, engineers and geoscientists are faced with corporate or scientific requirements to properly prepare geological models with measurements involving a small fraction of the entire area or volume of interest. Exact description of a system such as an oil reservoir is neither feasible nor economically possible. The results are necessarily uncertain. Note that the uncertainty is not an intrinsic property of the systems; it is the result of incomplete knowledge by the observer. The Aim of Geostatistics —The main objective of geostatistics is the characterization of spatial systems that are incompletely known, systems that are common in geology. A key difference from classical statistics is that geostatistics uses the sampling location of every measurement. Unless the measurements show spatial correlation, the application of geostatistics is pointless. Ordinarily the need for additional knowledge goes beyond a few points, which explains the display of results graphically as fishnet plots, block diagrams, and maps. Geostatistical Methods —Geostatistics is a collection of numerical techniques for the characterization of spatial attributes using primarily two tools: probabilistic models, which are used for spatial data in a manner similar to the way in which time-series analysis characterizes temporal data, or pattern recognition techniques. The probabilistic models are used as a way to handle uncertainty in results away from sampling locations, making a radical departure from alternative approaches like inverse distance estimation methods. Differences with Time Series —On dealing with time-series analysis, users frequently concentrate their attention on extrapolations for making forecasts. Although users of geostatistics may be interested in extrapolation, the methods work at their best interpolating. This simple difference has significant methodological implications. Historical Remarks —As a discipline, geostatistics was firmly established in the 1960s by the French engineer Georges Matheron, who was interested in the appraisal of ore reserves in mining. Geostatistics did not develop overnight. Like other disciplines, it has built on previous results, many of which were formulated with different objectives in various fields. Pioneers —Seminal ideas conceptually related to what today we call geostatistics or spatial statistics are found in the work of several pioneers, including: 1940s: A.N. Kolmogorov in turbulent flow and N. Wiener in stochastic processing; 1950s: D. Krige in mining; 1960s: B. Mathern in forestry and L.S. Gandin in meteorology Calculations —Serious applications of geostatistics require the use of digital computers. Although for most geostatistical techniques rudimentary implementation from scratch is fairly straightforward, coding programs from scratch is recommended only as part of a practice that may help users to gain a better grasp of the formulations. Software —For professional work, the reader should employ software packages that have been thoroughly tested to handle any sampling scheme, that run as efficiently as possible, and that offer graphic capabilities for the analysis and display of results. This primer employs primarily the package Stanford Geomodeling Software (SGeMS) - recently developed at the Energy Resources Engineering Department at Stanford University - as a way to show how to obtain results practically. This applied side of the primer should not be interpreted as the notes being a manual for the use of SGeMS. The main objective of the primer is to help the reader gain an understanding of the fundamental concepts and tools in geostatistics. Organization of the Primer —The chapters of greatest importance are those covering kriging and simulation. All other materials are peripheral and are included for better comprehension of these main geostatistical modeling tools. The choice of kriging versus simulation is often a big puzzle to the uninitiated, let alone the different variants of both of them. Chapters 14, 18, and 19 are intended to shed light on those subjects. The critical aspect of assessing and modeling spatial correlation is covered in chapter 7. Chapters 2 and 3 review relevant concepts in classical statistics. Course Objectives —This course offers stochastic solutions to common problems in the characterization of complex geological systems. At the end of the course, participants should have: an understanding of the theoretical foundations of geostatistics; a good grasp of its possibilities and limitations; and reasonable familiarity with the SGeMS software, thus opening the possibility of practically applying geostatistics.

Open-File Report↗

USGS1985

Near-infrared spectra of West Shasta gossans compared with true and false gossans from Australia and Saudi Arabia

The near-infrared spectra of a suite of outcrop samples of massive sulfide gossans and false gossans representing three different weathering environments were measured and studied with X-ray, scanning electron microscope, and energy dispersive X-ray. Gossans that formed in a humid tropical environment are represented by samples from the Mt. Isa area, Queensland, Australia, and gossans that formed in an arid environment are represented by samples from several locations in Saudi Arabia. The gossans of the West Shasta massive sulfide district in California represent a weathering environment intermediate between these two extremes.On the basis of these spectral measurements, true gossans after massive sulfide deposits have spectra in the 800 to 2,500 nanometer (nm) region that are distinctly different from the spectra of false gossans. In the humid tropical environment, highly leached, newly formed kaolin minerals in the gossan cause spectral differences at about 1,400 to 2,200 nm. In the arid environment, true gossans preserve talc and minor mica from the massive sulfide deposit; these minerals are not observed in false gossans. These minerals result in spectral differences in the 2,200- to 2,300-nm region. In addition, true gossans generally have goethite spectral bands at about 900 nm as opposed to hematite spectral bands at about 850 nm for the false gossans.False gossans are not known in the West Shasta district; however, the gossan at the largest deposit, Iron Mountain, is a true gossan that has the distinctive spectral features of goethite at about 900 nm and diaspore in the 1,400- to 2,500-nm region. The other gossans also have the spectral features of goethite, but they contain a less leached mixture of kaolinite plus illite and have distinctive spectral features in the 1,400- to 2,500-nm region. These spectral differences define two groups of West Shasta gossans--inner gossans in large deposits and outer gossans at the margins of large deposits and in lesser massive sulfide deposits.

Economic Geology↗

USGS2017

Niobium and tantalum

Niobium and tantalum are transition metals that are almost always found together in nature because they have very similar physical and chemical properties. Their properties of hardness, conductivity, and resistance to corrosion largely determine their primary uses today. The leading use of niobium (about 75 percent) is in the production of high-strength steel alloys used in pipelines, transportation infrastructure, and structural applications. Electronic capacitors are the leading use of tantalum for high-end applications, including cell phones, computer hard drives, and such implantable medical devices as pacemakers. Niobium and tantalum are considered critical and strategic metals based on the potential risks to their supply (because current production is restricted to only a few countries) and the significant effects that a restriction in supply would have on the defense, energy, high-tech industrial, and medical sectors. The average abundance of niobium and tantalum in bulk continental crust is relatively low—8.0 parts per million (ppm) niobium and 0.7 ppm tantalum. Their chemical characteristics, such as small ionic size and high electronic field strength, significantly reduce the potential for these elements to substitute for more common elements in rock-forming minerals and make niobium and tantalum essentially immobile in most aqueous solutions. Niobium and tantalum do not occur naturally as pure metals but are concentrated in a variety of relatively rare oxide and hydroxide minerals, as well as in a few rare silicate minerals. Niobium is primarily derived from the complex oxide minerals of the pyrochlore group ((Na,Ca,Ce) 2 (Nb,Ti,Ta) 2 (O,OH,F) 7 ), which are found in some alkaline granite-syenite complexes (that is, igneous rocks containing sodium- or potassium-rich minerals and little or no quartz) and carbonatites (that is, igneous rocks that are more than 50 percent composed of primary carbonate minerals, by volume). Tantalum is derived mostly from the mineral tantalite ((Fe,Mn)(Ta,Nb) 2 O 6 ), which is found as an accessory mineral in rare-metal granites and pegmatites that are also enriched in lithium and cesium (termed lithium-cesium-tantalum (LCT)-type pegmatites). Brazil and Canada are the leading nations that produce niobium mineral concentrates, but Brazil is by far the leading producer, accounting for about 90 percent of production, which comes mostly from weathered material derived from carbonatites. Brazil and Canada also have the largest identified niobium resources; additional resources, although they are less well reported, occur in Angola, Australia, China, Greenland, Malawi, Russia, and South Africa. Australia and Brazil have been the leading producers of tantalum mineral concentrates, although recently Ethiopia and Mozambique have also been significant suppliers of tantalum. Artisanal mining of columbite-tantalite (also called coltan) is practiced in many countries, particularly Burundi, the Democratic Republic of the Congo (Congo [Kinshasa]), Nigeria, Rwanda, and Uganda. Brazil has about 40 percent of the identified tantalum resources; other countries and regions with identified tantalum resources include, in decreasing order of resources, Australia, Asia, Russia and the Middle East, Africa, North America, and Europe. Identified niobium and tantalum resources in the United States are small, low grade, and difficult to recover and process, and are thus not commercially recoverable at current prices. Consequently, the United States meets its current and expected future needs for niobium and tantalum through imports of primary mineral concentrates and alloys and through recovery from foreign and domestic alloy scrap that contain the metals. Environmentally, the main issues related to niobium and tantalum mining are land disruptions, the volume of waste materials and their disposal, and the radioactivity of some tailings and waste materials that contain thorium and uranium. Because of the relative biological inertness of niobium and tantalum, human and ecological health concerns are generally minimal under most natural conditions. Demand for both niobium and tantalum is expected to increase as the world economy continues to recover from the downturn that began in 2008. Increased demand for niobium is linked to increased consumption of microalloyed steel, which is used in the manufacture of cars, buildings, ships, and refinery equipment. Demand for these steels will likely increase with continued economic development in such countries as Brazil, China, and India. In addition, increased global demand for cars, cell phones, computers, superconducting magnets, and other high-tech devices will likely spur increased demand for both niobium and tantalum. The estimated global reserves and resources of niobium and tantalum are large and appear more than sufficient to meet global demand for the foreseeable future, possibly the next 500 years. The sale of “conflict coltan” attributed to rebel forces waging a civil war in Congo (Kinshasa) has been of recent concern and has highlighted the need for a transparent and traceable global supply chain that can exclude illegal columbite-tantalite from the conventional market while discerning legitimate artisanal mine production in central Africa.

Professional Paper↗

USGS2023

Integrated rangeland fire management strategy actionable science plan completion assessment — Sagebrush and sage-grouse topic, 2015–20

Loss and degradation of sagebrush rangelands due to an accelerated invasive annual grass-wildfire cycle and other stressors are significant management, conservation, and economic issues in the western United States. These sagebrush rangelands comprise a unique biome spanning 11 states, support over 350 wildlife species, and provide important ecosystem services that include stabilizing the economies of western communities. Impacts to sagebrush ecosystem processes over large areas due to the annual grass-wildfire cycle necessitated the development of a coordinated, science-based strategy for improving efforts to achieve long-term protection, conservation, and restoration of sagebrush rangelands, which was framed in 2015 under the Integrated Rangeland Fire Management Strategy (IRFMS). Central to this effort was the development of an Actionable Science Plan (Plan) that identified 37 priority science needs (Needs) for informing the actions proposed under the 5 topics (Fire, Invasives, Restoration, Sagebrush and Sage-Grouse, Climate and Weather) that were part of the collective focus of the IRFMS. Notable keys to this effort were identification of the Needs co-produced by managers and researchers, and a focus on resulting science being “actionable.” Substantial investments aimed at fulfilling the Needs identified in the Plan have been made since its release in 2016. While the state of the science has advanced considerably, the extent to which knowledge gaps remain relative to identified Needs is relatively unknown. Moreover, new Needs have likely emerged since the original strategy as results from actionable science reveal new questions and possible (yet untested) solutions. A quantifiable assessment of the progress made on the original science Needs can identify unresolved gaps and new information that can help inform prioritization of future research efforts. This report details a systematic literature review that evaluated how well peer-reviewed journal articles and formal technical reports published between January 1, 2015, and December 31, 2020, addressed nine needs (hereinafter, “Needs”) identified under the Sagebrush and Sage-Grouse topic in the Plan. The topic outlined research Needs broadly focused on understanding sagebrush rangelands and population dynamics important for the conservation and management of sage-grouse and other sagebrush-reliant wildlife species. We established the level of progress towards addressing each Need following a standardized set of criteria, and developed summaries detailing how research objectives nested within Needs identified in the Plan (‘Next Steps’) were either addressed well, partially addressed or remain outstanding (in other words, addressed poorly) in the literature through 2020. Our searches resulted in the inclusion of 333 science products that at least partially addressed a Need identified in the Sagebrush and Sage-Grouse topic. The Needs that were well and partially addressed included: development of biome-wide mapping techniques that provide regularly updated grassland and shrubland vegetation layers (Need 4); generation of spatially explicit greater sage-grouse habitat suitability and population models (Need 5); identification of greater sage-grouse seasonal habitats (Need 6); identification of thresholds for the extent of threats, especially conifer expansion, above which greater sage-grouse and other sagebrush-obligate species cannot persist (Need 8); and studies of sagebrush community dynamics as those relate to management and restoration of sagebrush rangelands (Need 9). Needs addressed poorly included: investigations of factors conducive and restrictive to greater sage-grouse movement patterns and population connectivity (Need 1); investigations of livestock and other large ungulate (for example, feral horse) grazing effects on greater sage-grouse populations and habitats (Need 2); identification of thresholds of disturbance (especially renewable energy developments) below which greater sage-grouse and other sagebrush reliant species are not impacted (Need 3); and studies of habitat relationships for sagebrush-reliant species other than greater sage-grouse, songbirds, and small mammals (Need 7). The information provided in this assessment will assist updating the Plan along with other science strategies.

western United States↗