SEARCH · Geology Reports

Results for “Techniques and Methods”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 17Linked to original sources

USGS2025

The effects of line simplification on planform geometry

Data on maps should retain accuracy regardless of scale. Yet, as cartographic lines are generalized, there can be impacts on properties such as topology, density, and planform geometry. Here, we investigate the use of the Scale Specific Sinuosity (S3) metric (Stanislawski et al., 2023) to evaluate the effects of line simplification on planform geometry, which is the bends of streams in map view. We employ an open-source Python S3 workflow to characterize the geometry of five diverse stream channels in the United States. The original data are extracted from the U.S. Geological Survey National Hydrography Dataset 1:24,000-scale vector data (U.S. Geological Survey, 2000) (Table 1), and the simplification is done using the Visvalingam and Whyatt method (2017) with a simplification tolerance of 0.5, 1.0, 1.5, and 2.0 km. The S3 analysis is calculated at each level of simplification and S3 derivatives are generated. Derivatives include measures of sinuosity, fractal dimension, and the dominant bend wavelength. The findings show that the change in planform geometry is scale-dependent, though simplification will have little effect on straighter lines. The change becomes more apparent in complex lines as the degree of simplification aligns with the scale of the dominant bend geometries. These logical conclusions are evidence that the S3 is a useful metric for automated characterization of bend geometry regardless of line complexity.

Conference Paper↗

USGS2025

Aquifer storage change and storage properties, Rio Rancho, New Mexico, 2019–23

To better understand changes in groundwater storage and groundwater elevations, the U.S. Geological Survey, in cooperation with the City of Rio Rancho, New Mexico, carried out a multiyear groundwater monitoring project. Groundwater-level data were collected at 27 locations, including sites having multiple wells screened at different depths and those having long-term records. A repeat microgravity network of 20 stations was established, and surveys were carried out three times per year. The microgravity method provides a direct, quantitative measurement of mass change caused by aquifer filling or draining. Data collected during the 2019–23 study period indicate generally stable groundwater conditions, with small fluctuations in groundwater levels (increasing at some wells, declining at others), and small declines in groundwater storage over the period of record at most gravity locations (average = −0.33 foot of water per year). The discrepancy between the water-level and microgravity data may have been caused by a loss of soil moisture in the unsaturated zone, which is as much as 1,000 feet thick in some areas. At the Rio Rancho Advanced Water Treatment Facility, where the city recharges water through direct injection, there may be seasonal correlations in storage related to injection but no longer-term accumulation of recharged water in the immediate vicinity of the facility, indicating water is moving efficiently into the aquifer.

New Mexico↗

USGS2025

Groundwater salinity: Applying the specific conductance and water type proxy

Groundwater is increasingly needed for water supplies but may have limited utility in some locations because of its salinity. Salinity, often expressed as total dissolved solid (TDS), is frequently estimated using specific conductance (SC) measurements. However, the commonly used proxy (0.65 multiplied by SC to indicate TDS, common in many handheld meters) can result in inaccurate TDS estimates. First, the TDS–SC relationship is not linear over the entire concentration range of groundwater. Furthermore, the TDS (and salinity)–SC relationships vary substantially depending on the major-ion composition. Here we develop a proxy method utilizing SC and major-ion water type to estimate TDS and salinity specifically for groundwaters. Compared to most surface waters, groundwater tends to have a wider range of salinity (fresh to highly saline) and higher concentrations of bedrock-derived solutes such as carbonate ions, silica, and many other ions. The dataset used to develop the proxies includes water chemistry data from 149,059 discrete groundwater samples. The groundwater proxies, which employ nonlinear log–log relations, utilize five water types (HCO 3 , Cl, Ca-Mg-SO 4 , Na-K-SO 4 , and mixed waters), are accurate (median percent difference between TDS and salinity determined using the proxy compared to discrete measurements was <±0.8%) over a wide range of SC (up to 200 mS/cm), rapid, cost-effective, and can be measured on-site.

Groundwater↗

USGS2024

Integrating Sr isotopes, microchemistry, and genetics to reconstruct Salmonidae species and life history

Recent approaches to fisheries research emphasize the importance of the coproduction of knowledge in building resilient and culturally mindful fisheries management frameworks. Despite widespread recognition of the need for Indigenous knowledge and historical reference points as baseline data, archaeological data are rarely included in conservation biology research designs. Here we propose a novel multiproxy method to learn from former fisheries stewards by generating archaeological data on past salmonid population parameters. We used a newly developed, high throughput qPCR (HT-qPCR) chip, originally designed for environmental DNA (eDNA), for species identification of archaeological salmonid vertebrae. We combine this with the laser ablation split-stream (LASS) approach to identify ocean-migration versus freshwater residency. We test this multidisciplinary approach using both contemporary and archaeological salmonid samples and new radiocarbon dates from the Tronsdal Site on the Skagit River, Washington State, USA. This is a useful approach for extracting information about Salmonidae species and life history diversity from archaeological remains to reconstruct historic baselines for several population parameters in anadromous species with long periods of freshwater residency. The approach outlined in this paper may be particularly useful for research investigating past fisheries dynamics, offering hundreds to thousands of years of temporal depth for modern fisheries management, harvest policies, restoration ecology, and conservation biology.

Idaho, Oregon, Washington↗

USGS2024

Forecasting storm-induced coastal flooding for 21st century sea-level rise scenarios in the Hawaiian, Mariana, and American Samoan Islands

Oceanographic, coastal engineering, ecologic, and geospatial data and tools were combined to evaluate the increased risks of storm-induced coastal flooding in the populated Hawaiian, Mariana, and American Samoan Islands as a result of climate change and sea-level rise. We followed a hybrid (dynamical and statistical) downscaling approach to map flooding due to waves and storm surge at 10-square meter resolution along all 1,870 kilometers of these islands’ coastlines for annual (1-year), 20-year, and 100-year return-interval storm events and +0.00 meter (m), +0.25 m, +0.50 m, +1.00 m, +1.50 m, +2.00 m, and +3.00 m sea-level rise scenarios. We quantified the coastal flood depths and extents using the latest climate forcing from Intergovernmental Panel for Climate Change’s Sixth Assessment Report Coupled Model Intercomparison Project. The data generated using these methods provide stakeholders and decision makers with a spatially explicit, rigorous valuation of how, where, and when climate change and sea-level rise increase coastal storm-induced flooding to help identify areas where management and (or) restoration could potentially help reduce the risk to, and increase the resiliency of, the coastal communities in the populated Hawaiian, Mariana, and American Samoan Islands.

Hawaii↗

USGS2024

Simulated ground-motion records for the seismic assessment of monumental masonry structures

Earthquakes are natural disasters that can cause widespread devastation and loss of life. Simulated ground-motion records can be useful in regions with limited seismic stations or a history of damaging but infrequent earthquakes. This is especially true in areas with a high concentration of heritage masonry structures, which are especially susceptible to damage, as simulated records can be crucial in predicting their seismic response and protecting these buildings from seismic damage. Despite the importance of simulated earthquakes, few studies have investigated how effective they are compared to real earthquakes when assessing the structural response of heritage buildings. To address this knowledge gap, we employ two different simulation methods of the Mw 6.2 Faial earthquake, which occurred on July 9th, 1998, in the Azores, to replicate the recorded time-series at four available stations within an epicentral distance of 150 km. The study has two objectives: first, to validate the simulated records of the 1998 Faial earthquake using alternative stochastic ground-motion simulation approaches, and second, to determine how these approaches impact the seismic assessment of historic masonry structures. To accomplish these objectives, this study uses real and simulated ground-motion datasets to conduct non-linear response history analyses of the São Francisco Church, a monumental structure in Horta that sustained damage during the Faial earthquake. The results show that both simulation approaches yield structural responses similar to the observed records.

Conference Paper↗

USGS2026

Integrating habitat suitability and climate constraints to predict nonnative fish invasion risk for U.S. streams and inland lakes

Introduction: Nonnative fishes in streams and inland lakes can substantially alter aquatic ecosystems by degrading habitat conditions, competing with native species, and restructuring food webs. Identifying invasion hotspots can inform proactive management and prevention of nonnative species establishment. Methods: In this study, we identified streams and lakes across the conterminous United States that are vulnerable to invasion by 18 nonnative stream and 28 nonnative lake fish species. Habitat suitability models were developed separately for stream and lake species across nine ecoregions using natural and anthropogenic predictors, and species occurrences were predicted by integrating model results with climate match scores based on comparisons between environmental conditions in species’ native and potential nonnative ranges. We classified areas with both high habitat suitability and strong climate similarity as having high invasion potential and generated hotspot maps by stacking species-level predictions. Results: Florida exhibits the highest invasion risk for both habitat types. Stream hotspots were concentrated near major metropolitan areas, whereas lake hotspots were more widely distributed across the Great Lakes basin and the northeastern U.S. Twelve species were predicted to invade both habitat types, with goldfish ( Carassius auratus ) and pirapitinga ( Piaractus brachypomus ) showing particularly high invasion potential. Discussion: These findings provide a comprehensive assessment of nonnative freshwater fish invasion risk and support targeted monitoring and management strategies.

conterminous United States↗

USGS2024

Afterslip and creep in the rate-dependent framework: Joint inversion of borehole strain and GNSS displacements for the Mw 7.1 Ridgecrest earthquake

The elusive transition toward afterslip following an earthquake is challenging to capture with typical data resolution limits. A dense geodetic network recorded the Mw 7.1 Ridgecrest earthquake, including 16 Global Navigation Satellite System (GNSS) stations and 3 borehole strainmeters (BSM). The sub-nanostrain precision and sub-second sampling rate of BSMs bridges a gap between conventional seismologic and geodetic methods, exemplified by atypical postseismic shear strain reversals observed at nearfield (<2 km) station B921 that remain unexplained. We jointly invert GNSS displacements and BSM strains for coseismic and postseismic slip spanning hours to months over 7 independent periods. Cosiesmically, our model resolves the largest slip magnitudes of up to 6.6 m on the mainshock rupture plane, with similar patterns to other inferred slip distributions. The foreshock fault appears to slip coincidently with mainshock, revealing potential asperities activated during the preceding Mw 6.4 event. Postseismically, the best-fitting models adhere to mechanical rate-and-state expectations of logarithmically decaying slip adjacent to the coseismic rupture terminus, and where deep rheologic conditions favor creep. Most spatial variation occurs in the early postseismic timeframe (<1–2 weeks), with evidence for regional rheologic control and static stress dependence. Triggered creep on the neighboring Garlock Fault unexpectedly persists for >178 days—further highlighting the importance of fault networks in postseismic stress redistribution, critical to assessing future hazard.

Journal of Geophysics Research↗

USGS2025

Global patterns of coseismic landslide runout mobility differ from aseismic landslide trends

Coseismic landslides significantly contribute to human and economic losses during and immediately following earthquakes, yet very little data on the runout of such landslides exist. While well-established behavior of aseismic (e.g., hydrologically triggered) landslide runout mobility suggests strong correlation between landslide size and mobility, limited studies of coseismic landslide runout find conflicting mobility trends. We present a global dataset of runout lengths produced from a new automated method for estimating landslide runout, developed and validated using 1726 manually mapped landslides from five unique earthquakes. We then apply the automated runout tool to 23 global earthquake-induced landslide inventories, producing a compiled database of 73,665 measured and estimated runout lengths of coseismic landslides to assess mobility trends. We find a significant divergence between well-established aseismic mobility trends and that of coseismic landslides, with far greater scatter and more complex mobility patterns in earthquake-triggered landslides. As a function of landslide size, we observe global coseismic landslide mobility patterns are bilinear, becoming increasingly less mobile with increasing size above some threshold. This discordance between aseismic and coseismic landslide mobility may be a function of landslide type, kinematics, hydrology, and or setting that systematically differ between triggering mechanisms and should be explored in more depth to develop predictive models of these unique runout patterns. These results suggest hazard and risk models for coseismic landslides may significantly under-predict or over-predict impacts, depending on the size of triggered landslides.

Engineering Geology↗

USGS2025

Long‐period ground motions from dynamic rupture simulations of large earthquakes on the creeping Hayward–Calaveras–Rodgers Creek fault system

he Hayward, Calaveras, and Rodgers Creek faults in the San Francisco Bay region of California have a high probability of producing a large earthquake in the next decades. Although these faults creep, the creep is insufficient to keep up with their relatively rapid slip rates on their deepest sections, so they have been storing tectonic strain since their last large earthquakes, with the Hayward’s and Rodgers Creek’s more than 150 yr ago. We do not know what the next large Hayward–Calaveras–Rodgers Creek earthquakes will look like or how strongly they will shake the San Francisco Bay region. Harris et al. (2021) used the 3D dynamic (spontaneous) rupture method to simulate large earthquakes on these creeping faults. In this article, we examine the resulting simulated long‐period ( T > 1 s) ground shaking from 0 to 50 km distance, for earthquakes nucleating on the Hayward fault and earthquakes nucleating on the Rodgers Creek fault. We compare these simulated long‐period ground motions with the Boore et al. (2014) well‐established empirically based ground‐motion model suitable for the slowest material velocity in our 3D velocity structure. We find that the simulated long‐period ground motions from the creeping‐fault earthquake scenarios produce a reasonable agreement with the empirical expectations if frictional cohesion is included only where it is appropriate.

California↗

USGS2024

Ambient flow and transport in long-screened, sand-packed wells: Insights into cross contamination and wellbore flow

The presence of long-screened wells with a surrounding sand pack can have a major effect on the redistribution of contaminants in groundwater, particularly when the wells are set in low-hydraulic conductivity aquifers. Such redistribution, or cross contamination, can occur through vertical flow and advective transport or by in-well mixing via multiple non-advective transport processes. A multi-method approach, including the use of single borehole dilution tracer (SBDT) logging, was undertaken to estimate vertical transport of trichloroethylene (TCE) in 8 discontinued remedial extraction wells, all constructed with long screens (100 ft, or 30.6 m long) and surrounding sand packs, at Site 25, Edwards Air Force Base, California. The site is within an enclosed drainage basin that is underlain primarily by quartz-monzonite-granitic rocks in various states of weathering. Prior to this study, little information was available on the depths of fracture zones intersecting the wellbores. Results indicate that because of in-well mixing processes, a potential redistribution of TCE of up to 9 g/d per well occurs as a consequence of leaving the wells inactive (unpumped) and unsealed, as measured by SBDT logging. Simulations of flow made with a generic model of the site show that if the wells were to be sealed with well liners, with the intent of reducing vertical TCE transport but the sand pack left intact, TCE transport decreases by 53% overall compared to leaving the wells unlined.

Environmental Earth Sciences↗

USGS1976

Uranium and trace elements in stream sediments as an exploration tool

More than 45 trace elements have been reported in anomalous amounts in the uranium ores. The specific suite of elements associated with any one uranium deposit varies according to deposit type and geologic province. The primary geochemical halo of uranium and associated trace elements in the host rock, together with secondary dispersion halo in soils and alluvium, offers a potential geochemical exploration target. Sediment from streams near low-grade uranium occurrences in arkosic sandstone of the Denver basin, Colorado, and sediment from streams in the igneous and metamorphic terrace near the Midnite mine of eastern Washington have been analyzed for acid-extractable U, Cu,Pb, Zn, Ni, Co, Fe, Mn, Mo, Cd, Cr, Ag, V, and Se, and for total Fe, Mn, Hg, As, and organic C. The -80 mesh fraction of the alluvium downstream from a small uraniferous limonite occurrence in the Denver basin shows anomalous concentrations of U, Pb, As, Ni, Mo, V, Zn, and Se. Anomalous concentrations of U persist farther downstream (as much as 1,000 m) than any of the trace elements. In another stream system southeast of Denver, above-background levels of U, Pb, As, Zn, V, Fe, and Mn occur near a uranium anomaly (defined by other methods) which has no surface mineralization. In the Midnite mine area, sediments of streams draining prospect areas showed anomalous concentrations of uranium (as much as 10 times background), but no accompanying anomalous trace-element concentrations, although analyses of Midnite mine ores show that a broad suite of trace elements are associated with uranium.

Open-File Report↗

USGS2025

Hydrologic variability and groundwater age of springs in eastern Oregon and northern Nevada, USA

The ecological importance of springs in semiarid regions is far greater than their small size and sparse distribution, yet little is known about the hydrologic functioning of these systems. During 2016–22, 261 springs were visited in the volcanic terrane of eastern Oregon and northern Nevada. When conditions were suitable, measurements of discharge, water temperature, and specific conductance were made, and samples for the analysis of carbon-14, tritium, and water stable isotopes (WSI) were collected. A subset of 60 springs was revisited during different seasons in the same year and during the dry season in multiple years to evaluate variability in discharge, chemistry, and groundwater age. Specific conductance and WSI varied considerably among springs across the study area but were unexpectedly stable across seasons and years at individual springs. Seasonal and interannual variability in spring discharge was related to the residence time of the discharging groundwater. Springs discharging older groundwater (10 3 –10 4 years) had significantly less variability in their discharge compared to springs discharging younger groundwater (10 0 –10 1 years). Variability among springs discharging younger groundwater included cessation of late-summer discharge at 18 % of the repeat-visit springs. A logistic regression model predicted the age of discharging spring water with 89 % accuracy using only the spring latitude, longitude, elevation, and δ 2 H value. This study framework provides a simple, inexpensive, and robust method to provisionally assess the hydrologic behavior of springs having little or no prior information in understudied, semiarid regions across the globe.

Nevada, Oregon↗

USGS2025

Pathways for potential exposure to onshore oil and gas wastewater: What we need to know to protect human health

Produced water is a chemically complex waste stream generated during oil and gas development. Roughly four trillion liters were generated onshore in the United States in 2021 (ALL Consulting, 2022, https://www.gwpc.org/wp-content/uploads/2021/09/2021_Produced_Water_Volumes.pdf ). Efforts are underway to expand historic uses of produced water to offset freshwater needs in water-stressed regions, avoid induced seismic activity associated with its disposal, and extract commodities. Understanding the potential exposures from current and proposed produced water uses and management practices can help to inform health-protective practices. This review summarizes what is known about potential human exposure to produced water from onshore oil and gas development in the United States. We synthesize 236 publications to create a conceptual model of potential human exposure that illustrates the current state of scientific inquiry and knowledge. Exposure to produced water can occur following its release to the environment through spills or leaks during its handling and management. Exposure can also arise from authorized releases, including permitted discharges to surface water, crop irrigation, and road treatment. Knowledge gaps include understanding the variable composition and toxicity of produced water released to the environment, the performance of treatment methods, migration pathways through the environment that can result in human exposure, and the significance of the exposures for human and ecosystem health. Reducing these uncertainties may help in realizing the benefits of produced water use while simultaneously protecting human health.

Environmental Health Perspectives↗

USGS2025

Quality of groundwater used for domestic supply in the Gilroy-Hollister basin and surrounding areas, California, 2022

More than 2 million Californians rely on groundwater from domestic wells for drinking-water supply. This report summarizes a 2022 California Groundwater Ambient Monitoring and Assessment Priority Basin Project (GAMA-PBP) water-quality survey of 33 domestic and small-system drinking-water supply wells in the Gilroy-Hollister Valley groundwater basin and the surrounding areas, where more than 20,000 residents are estimated to utilize privately owned domestic wells. The study area includes the Llagas subbasin in the north, the North San Benito subbasin in the south, and the surrounding uplands. The study was focused on groundwater resources used for domestic drinking-water supply, which are mostly drawn from shallower parts of aquifer systems rather than those of groundwater resources used for public drinking-water supply in the same area. This assessment characterized the quality of ambient groundwater in the aquifer before filtration or treatment, rather than the quality of drinking water delivered to the tap. To provide context, the measured concentrations of constituents in groundwater were compared to Federal and California State regulatory and non-regulatory benchmarks for drinking-water quality. A grid-based method was used to estimate the areal proportions of groundwater resources used for domestic drinking wells that have water-quality constituents present at high concentrations (above the benchmark), moderate concentrations (between one-half of the benchmark and the benchmark for inorganic constituents, or between one-tenth of the benchmark and the benchmark for organic constituents), and low concentrations (less than one-half or one-tenth the benchmark for inorganic and organic constituents, respectively). This method provides statistically representative results at the study-area scale and permits comparisons to other GAMA-PBP study areas. In the study area, inorganic constituents in groundwater were greater than regulatory benchmarks (U.S. Environmental Protection Agency [EPA] or State of California maximum contaminant levels [MCLs]) for public drinking-water quality in 24 percent of domestic groundwater resources. The inorganic constituents present at concentrations greater than MCLs for drinking water were nitrate (as nitrogen), barium, chromium, and selenium. Total dissolved solids (TDS) or manganese were present at concentrations greater than the secondary maximum contaminant levels (SMCLs) that the State of California uses as aesthetic-based benchmarks in 48 percent of domestic groundwater resources. No volatile organic compounds or pesticide constituents were present at concentrations greater than regulatory benchmarks. Total coliform bacteria and enterococci were detected in 4 percent of domestic groundwater resources. Per- and polyfluoroalkyl substances (PFAS) were detected in 19 percent of domestic groundwater resources, and 10 percent had concentrations greater than recently enacted (April 2024) EPA MCLs. Physical and chemical factors from natural and anthropogenic sources that could affect the groundwater quality were evaluated using results from statistical testing of associations between constituent concentrations and potential explanatory variables. In this study, relevant physical factors include well construction characteristics, groundwater age, site proximity to groundwater recharge or discharge zones, and potential sources of contamination. Relevant chemical factors include the initial chemistry of the recharge water, the mineralogy of the aquifer sediments, and the subsequent shifts in chemistry as biologic and geologic reactions alter groundwater in the subsurface. Nitrate concentrations were correlated to agricultural land use, distance from the boundary of the Gilroy-Hollister Valley groundwater basin, and the proportion of modern (post-1950s) water captured by the well. Denitrification under anoxic redox conditions can mitigate some nitrate derived from fertilizer application. Total dissolved solids primarily were derived from water-rock interactions with soils and aquifer materials in the study area, but there were high concentrations where agricultural practices contributed additional TDS. Mineralogy of aquifer sediments and rocks also affect barium, selenium, boron, and chromium concentrations in the Gilroy-Hollister Valley groundwater basin. PFAS were positively correlated with urban land use and the proportion of modern water captured by the well.

California↗

USGS2025

Preliminary depth to basement modeling at Salton Sea, California

The San Andreas Fault – Imperial Fault (SAF-IF) transtensional step-over zone along the southern margin of the Salton Sea hosts substantial geothermal production and lithium brine resources. Recent volcanism at the Salton Buttes and active seismicity along the SAFIF fault system highlight active tectonic and magmatic processes that pose natural hazards and may impact energy and mineral production. Characterizing the subsurface architecture and extent of concealed alteration associated with this tectono-magmatic system enhances understanding of these active processes, associated hazards, and resources. We have compiled a gravity database, consisting of new and re-processed existing data, from which we have constructed a new isostatic residual gravity anomaly map of the Salton trough. We have used this new gravity dataset together with a compilation of publicly available borehole data to develop new depth to basement inversion models for the region. These depth to basement models help to constrain basin geometries, inform alteration mapping, and reveal variations in basement rocks. Due to the concealed nature of the complex tectonic framework at the Salton trough, it is necessary to utilize geophysical methods for subsurface characterization. These new depth to basement models are a first step toward constructing 2D and 3D geophysical and geologic models of the Imperial Valley and Salton Sea geothermal area. This analysis complements other geophysical initiatives, including magnetotelluric (MT) modeling (Tokmakoff et al., 2024), magnetic mapping (Glen and Earney, 2023, 2024) and potential field modeling, and seismic studies focused on hazard and resource investigations in the Imperial Valley.

California↗

USGS2025

Remote single-station seismic monitoring of the July–October 2022 earthquake swarm at Tau volcano, American Samoa

From July to October 2022, a non-eruptive volcanic earthquake swarm occurred within ~15 km of Taʻū Island, located in eastern American Samoa. Felt reports from local residents were the only available information about the swarm when it started, as American Samoa lacked a seismic monitoring network. We developed a consistent single-station catalog for the entire swarm, using seismic data from the nearest station IU.AFI, ~250 km away. We applied the EQTransformer deep-learning model (Mousavi et al., 2020), automatically picking Pn and Sn arrivals on IU.AFI continuous data. We retained only events with Sn-Pn times of 22.5–25 seconds, consistent with the expected locations based on felt reports, then detected smaller swarm events with subsequent template-matching. This single-station catalog characterized the swarm’s onset and escalation to peak activity before a multi-agency field response team installed a local seismic network in mid-August 2022. This permanent seismic network captured the swarm’s decline. EQTransformer identified short S-P times on the first two locally deployed seismometers, both Raspberry Shake sensors, to constrain the swarm’s distance from Taʻū Island. Modern seismological processing methods, combined with basic observations such as felt reports, can quickly contribute useful information during an earthquake response in a poorly monitored region.

American Somoa↗

USGS2026

Black rails in Baja California

Summarizing records from 1905 to 2025, we document the presence and distribution of the California black rail ( Laterallus jamaicensis coturniculus ) in northwestern México, particularly Baja California and the Colorado River Delta. This subspecies has a restricted distribution in the western U.S. and northwestern México. We found few records over the past century: sparse detections in the early 1900s and an increase in reported records after 2000. Over 120 years, we compiled 35 documented records of California black rail occurrence in Baja California with a minimum reported count of 56 rails. Our call-broadcast survey methods reconfirmed previously occupied sites and documented the species at a previously unreported site. Surveys in the Baja California portion of the Colorado River Delta yielded 20 detections across nine survey events between 2000 and 2022. In April 2003, standardized surveys detected 12 California black rails: 7 in Bahía de San Quintín, 3 in Arroyo San Telmo, and 2 in Arroyo El Rosario. Our recent survey work (2022–2025) recorded maximum monthly counts of 31 detections at Bahía de San Quintín and 15 detections at Estero de Punta Banda, the latter representing a previously undocumented location for the subspecies. These surveys also yielded the first photographic and acoustic documentation of California black rail in México. The contribution of spatial and temporal data provided by citizen science platforms increased our understanding of the subspecies’ distribution. Enforceable protection of this subspecies’ habitat is needed to safeguard its persistence.

Baja California↗