Geology ReportsSearch

SEARCH · Geology Reports

Results for “Science of Remote Sensing”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

EAARL Coastal Topography-Fire Island National Seashore, New York, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired post-Nor'Ida (November 2009 nor'easter) on December 4, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series

EAARL coastal topography and imagery–Western Louisiana, post-Hurricane Rita, 2005: First surface

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived first-surface (FS) topography datasets were produced by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, Florida, and the National Aeronautics and Space Administration (NASA), Wallops Flight Facility, Virginia. This project provides highly detailed and accurate datasets of a portion of the Louisiana coastline beachface, acquired post-Hurricane Rita on September 27-28 and October 2, 2005. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the National Aeronautics and Space Administration (NASA) Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument may be deployed on a range of light aircraft. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the "bare earth" under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Lidar for Science and Resource Management Website.

Louisiana

Agencies collaborate, develop a cyanobacteria assessment network

Cyanobacteria are a genetically diverse group of photosynthetic microorganisms that occupy a broad range of habitats on land and water all over the world. They release toxins that can cause lung and skin irritation, alter the taste and odor of potable water, and cause human and animal illness. Cyanobacteria blooms occur worldwide, and climate change may increase the frequency, duration, and extent of these bloom events. Rapid detection of potentially harmful blooms is essential to protect humans and animals from exposure. Information about potential for exposure, such as bloom duration, frequency, and extent, is especially critical for developing environmental management decisions during periods of limited resources and funding. The National Research Council (NRC) report Exposure Science in the 21st Century suggested that effectively assessing and mitigating exposures requires techniques for rapid measurement of a stressor, such as an algal bloom, across diverse geographic, temporal, and biologic scales (e.g., various bloom concentrations) and an enhanced infrastructure to address threats [ NRC , 2012]. The report specifically calls for approaches that use diverse information, such as satellite remote sensing, to identify and understand exposures that may pose a threat to ecosystems or human health. A collaborative effort integrates the work of the U.S. Environmental Protection Agency (EPA), NASA, the National Oceanic and Atmospheric Administration (NOAA), and the U.S. Geological Survey (USGS) to provide an approach for using satellite ocean color capabilities in U.S. fresh and brackish water quality management decisions. The overarching goal of this collaborative project is to detect and quantify cyanobacteria blooms using satellite data records in order to support the environmental management and public use of U.S. lakes and reservoirs. Satellite remote sensing tools may enable policy makers and environmental managers to assess the sustainability of watershed ecosystems and the services they provide, now and in the future. Satellite technology allows us to develop early-warning indicators of cyanobacteria blooms at the local scale while maintaining continuous national coverage.

Eos, Earth and Space Science News

Unlocking ecological insights from sub-seasonal visible-to-shortwave infrared imaging spectroscopy: The SHIFT campaign

We stand at the threshold of a transformative era in Earth observation, marked by space-borne visible-to-shortwave infrared (VSWIR) imaging spectrometers that promise consistent global observations of ecosystem function, phenology, and inter- and intra-annual change. However, the full value of repeat spectroscopy, the information embedded within different temporal scales, and the reliability of existing algorithms across diverse ecosystem types and vegetation phenophases have remained elusive due to the absence of suitable sub-seasonal spectroscopy data. In response, the Surface Biology and Geology (SBG) High-Frequency Time Series (SHIFT) campaign was initiated during late February 2022 in Santa Barbara County, California. SHIFT, designed to support NASA's SBG mission, addressed mission scoping, scientific advancement, applications development, and community building. This ambitious endeavor included weekly Airborne Visible InfraRed Imaging Spectrometer-Next Generation (AVIRIS-NG) imagery acquisitions for 13 weeks (spanning February 24 to May 29, 2022), accompanied by coordinated terrestrial vegetation and coastal aquatic data collection. We describe the rich datasets collected and illustrate how the complex sub-seasonal patterns of change can be linked to biological science and applications, surpassing insights from multispectral observations. Leveraging open-source processing methods and cloud-based analysis tools, the SHIFT campaign showcases the readiness of the scientific community to harness ecological insights from remotely sensed hyperspectral time series. We provide an overview of SHIFT's goals, data collections, preliminary results, and the collaborative efforts of early career scientists committed to unlocking the transformative potential of high-frequency time series data from space-borne VSWIR imaging spectrometers.

Ecosphere

Geospatial Technology Applications and Infrastructure in the Biological Resources Division

Executive Summary -- Automated spatial processing technology such as geographic information systems (GIS), telemetry, and satellite-based remote sensing are some of the more recent developments in the long history of geographic inquiry. For millennia, humankind has endeavored to map the Earth's surface and identify spatial relationships. But the precision with which we can locate geographic features has increased exponentially with satellite positioning systems. Remote sensing, GIS, thematic mapping, telemetry, and satellite positioning systems such as the Global Positioning System (GPS) are tools that greatly enhance the quality and rapidity of analysis of biological resources. These technologies allow researchers, planners, and managers to more quickly and accurately determine appropriate strategies and actions. Researchers and managers can view information from new and varying perspectives using GIS and remote sensing, and GPS receivers allow the researcher or manager to identify the exact location of interest. These geospatial technologies support the mission of the U.S. Geological Survey (USGS) Biological Resources Division (BRD) and the Strategic Science Plan (BRD 1996) by providing a cost-effective and efficient method for collection, analysis, and display of information. The BRD mission is 'to work with others to provide the scientific understanding and technologies needed to support the sound management and conservation of our Nation's biological resources.' A major responsibility of the BRD is to develop and employ advanced technologies needed to synthesize, analyze, and disseminate biological and ecological information. As the Strategic Science Plan (BRD 1996) states, 'fulfilling this mission depends on effectively balancing the immediate need for information to guide management of biological resources with the need for technical assistance and long-range, strategic information to understand and predict emerging patterns and trends in ecological systems.' Information sharing plays a key role in nearly everything BRD does. The Strategic Science Plan discusses the need to (1) develop tools and standards for information transfer, (2) disseminate information, and (3) facilitate effective use of information. This effort centers around the National Biological Information Infrastructure (NBII) and the National Spatial Data Infrastructure (NSDI), components of the National Information Infrastructure. The NBII and NSDI are distributed electronic networks of biological and geographical data and information, as well as tools to help users around the world easily find and retrieve the biological and geographical data and information they need. The BRD is responsible for developing scientifically and statistically reliable methods and protocols to assess the status and trends of the Nation's biological resources. Scientists also conduct important inventory and monitoring studies to maintain baseline information on these same resources. Research on those species for which the Department of the Interior (DOI) has trust responsibilities (including endangered species and migratory species) involves laboratory and field studies of individual animals and the environments in which they live. Researchboth tactical and strategicis conducted at the BRD's 17 science centers and 81 field stations, 54 Cooperative Fish and Wildlife Research Units in 40 states, and at 11 former Cooperative Park Study Units. Studies encompass fish, birds, mammals, and plants, as well as their ecosystems and the surrounding landscape. Biological Resources Division researchers use a variety of scientific tools in their endeavors to understand the causes of biological and ecological trends. Research results are used by managers to predict environmental changes and to help them take appropriate measures to manage resources effectively. The BRD Geospatial Technology Program facilitates the collection, analysis, and dissemination of data and informat

Information and Technology Report

Characterizing the influence of remotely sensed wetland and lake water storage on discharge using LSTM models

Globally, many wetlands and lakes are at risk for further loss, which can amplify downstream consequences of flood and drought events. We derived remotely sensed based time series of surface water storage (SW storage ) to determine when and where accounting for SW storage dynamics improves predictions of river discharge. We trained four long short-term memory (LSTM) models, that differed in their inclusion of storage data and catchment characteristics, to simulate daily river discharge (2016–2023) for select watersheds across the conterminous United States. Adding SW storage to a meteorology-only or meteorology-and-catchment characteristics model improved upon model Nash-Sutcliffe efficiency (NSE) in 80.6% of the watersheds. Residuals during low-flow (Q70) events decreased by 47.6% when adding storage to meteorological data. Improvements were most consistent in ecoregions with a greater abundance of non-floodplain lakes and wetlands. This effort represents the first exploration to train a multi-watershed LSTM on landscape-scale remotely sensed time series of SW storage .

conterminous United States

Clarifying regional hydrologic controls of the Marañón River, Peru through rapid assessment to inform system-wide basin planning approaches

We use remote sensing to enhance the interpretation of the first baseline dataset of hydrologic, isotopic and hydrochemical variables spanning 620 km of the upper Marañón River, in Andean Peru, from the steep alpine canyons to the lower lying jungle. Remote, data-scarce river systems are under increased hydropower development pressure to meet rising energy demands. The upstream-downstream river continuum, which serves as a conduit for resource exchange across ecosystems, is at risk, potentially endangering the people, environments, and economies that rely on river resources. The Marañón River, one of the final free-flowing headwater connections between the Andes and the Amazon, is the subject of myriad large-scale hydropower proposals. Due to challenging access, environmental data are scarce in the upper Marañón, limiting our ability to do system-wide river basin planning. We capture key processes and transitions in the context of hydropower development. Two hydrologic regimes control the Marañón dry-season flow: in the higher-elevation upper reaches, a substantial baseflow is fed by groundwater recharged from wet season rains, in contrast to the lower reaches where the mainstem discharge is controlled by rain-fed tributaries that receive rain from lowland Amazon moisture systems. Sustainability of the upper corridor’s dry-season baseflow appears to be more highly connected to the massive natural storage capacity of extensive wetlands in the puna (alpine grasslands) than with cryospheric water inputs. The extent and conservation of puna ecosystems and glacier reservoirs may be interdependent, bringing to bear important conservation questions in the context of changing climate and land use in the region. More generally, this case study demonstrates an efficient combined remote sensing and field observation approach to address data scarcity across regional scales in mountain basins facing imminent rapid change.

Marañón River

Report of the U.S. Geological Survey Lidar Workshop sponsored by the Land Remote Sensing Program and held in St. Petersburg, FL, November 2002

The first United States Geological Survey (USGS) Light Detection And Ranging (lidar) Workshop was held November 20-22, 2002 in St. Petersburg, Florida to bring together scientists and managers from across the agency. The workshop agenda focused on six themes: 1) current and future lidar technologies, 2) lidar applications within USGS science and disciplines, 3) calibration and accuracy assessment, 4) tools for processing and evaluating lidar data sets, 5) lidar data management, and 6) commercial and contracting issues. These six themes served as the topics for workshop plenary sessions as well as the general focus for associated breakout sessions. A number of recommendations are presented regarding the role the USGS should play in the future application and development of lidar technology.

Open-File Report

Technical Manual for the Geospatial Stream Flow Model (GeoSFM)

The monitoring of wide-area hydrologic events requires the use of geospatial and time series data available in near-real time. These data sets must be manipulated into information products that speak to the location and magnitude of the event. Scientists at the U.S. Geological Survey Earth Resources Observation and Science (USGS EROS) Center have implemented a hydrologic modeling system which consists of an operational data processing system and the Geospatial Stream Flow Model (GeoSFM). The data processing system generates daily forcing evapotranspiration and precipitation data from various remotely sensed and ground-based data sources. To allow for rapid implementation in data scarce environments, widely available terrain, soil, and land cover data sets are used for model setup and initial parameter estimation. GeoSFM performs geospatial preprocessing and postprocessing tasks as well as hydrologic modeling tasks within an ArcView GIS environment. The integration of GIS routines and time series processing routines is achieved seamlessly through the use of dynamically linked libraries (DLLs) embedded within Avenue scripts. GeoSFM is run operationally to identify and map wide-area streamflow anomalies. Daily model results including daily streamflow and soil water maps are disseminated through Internet map servers, flood hazard bulletins and other media.

Open-File Report

Discussion on remote sensing for aquatic monitoring

The special session on Remote Sensing for Aquatic Resource Monitoring concluded with an expert panel discussion. Panel members were Jennifer Bountry (hydraulic engineer, Bureau of Reclamation), Mimi D’Iorio (GIS analyst and database manager, National Oceanic and Atmospheric Administration), Russ Faux (president, Watershed Sciences, Inc.), Steve Lanigan (team leader, Aquatic and Riparian Effectiveness Monitoring Program, U.S. Forest Service), and Amar Nayegandhi (computer scientist, Jacobs Technology, contracted to U.S. Geological Survey). The panel was moderated by Ralph Haugerud (geologist, U.S. Geological Survey) and there were significant contributions from the audience. The dialogue is summarized below in question and answer format. This summary is followed by discussion of what we learned in the course of the special session and identification of some next steps for the Pacific Northwest aquatic monitoring community.

PNAMP Special Publication

Confronting uncertainty: Contributions of the wildlife profession to the broader scientific community

Most wildlife professionals are engaged in 1 or both of 2 basic endeavors: science and management. These endeavors are a focus of many other disciplines, leading to widespread sharing of general methodologies. Wildlife professionals have appropriately borrowed and assimilated many methods developed primarily in other disciplines but have also led the development of one class of quantitative methods, those that confront and incorporate uncertainty. Uncertainty arises in counts of focal entities, for which wildlife professionals have developed effective methods to deal with the common problems of nondetection and misclassification. These methods have been borrowed by disciplines as varied as paleobiology, medicine, human epidemiology, industrial quality control, military target acquisition, remote sensing, and human census. Uncertainty also arises in the modeling of those counts, specifically the observation and ecological processes that generated them. Wildlife professionals recognized the fundamental importance of model selection and rapidly assimilated methods for selecting the most appropriate model for a given data set. These methods for dealing with uncertainty inherent to counting and modeling are critical to the conduct of science and management. Wildlife professionals have developed additional methods for incorporating uncertainty in the accumulation of knowledge and the development of optimal decisions in an environment of learning. In some cases, professionals in other disciplines are using methods developed and popularized in the wildlife profession, but there is much potential for greater use. In this essay, I describe these areas of wildlife leadership, document their assimilation by other disciplines, and emphasize the potential for more interdisciplinary use of these methods.

Journal of Wildlife Management

Compilation of a nationwide river image dataset for identifying river channels and river rapids via deep learning

Remote sensing enables large-scale, image-based assessments of river dynamics, offering new opportunities for hydrological monitoring. We present a publicly available dataset consisting of 281,024 satellite and aerial images of U.S. rivers, constructed using an Application Programming Interface (API) and the U.S. Geological Survey’s National Hydrography Dataset. The dataset includes images, primary keys, and ancillary geospatial information. We use a manually labeled subset of the images to train models for detecting rapids, defined as areas where high velocity and turbulence lead to a wavy, rough, or even broken water surface visible in the imagery. To demonstrate the utility of this dataset, we develop an image segmentation model to identify rivers within images. This model achieved a mean test intersection-over-union ( 𝐼 𝑜 𝑈 ) of 0.57, with performance rising to an actual 𝐼 𝑜 𝑈 of 0.89 on the subset of predictions with high confidence (predicted 𝐼 𝑜 𝑈 > 0.9). Following this initial segmentation of river channels within the images, we trained several convolutional neural network (CNN) architectures to classify the presence or absence of rapids. Our selected model reached an accuracy and F1 score of 0.93, indicating strong performance for the classification of rapids that could support consistent, efficient inventory and monitoring of rapids. These data provide new resources for recreation planning, habitat assessment, and discharge estimation. Overall, the dataset and tools offer a foundation for scalable, automated identification of geomorphic features to support riverine science and resource management.

Remote Sensing

Estimates of global surface water dynamics harnessing near real-time land cover observations and open science geospatial capabilities

Spatio-temporal changes to our world’s surface water resources are escalating. Translating how these changes impact communities and ecosystems requires time-varying data of Global Surface Water Extents (GSWE). Traditionally, GSWE mapping has been limited to static estimates, with recent efforts focusing on annual averages, frequency and occurrence of long-term variations. Building upon these foundational capabilities, we harnessed remotely sensed Sentinel-2 based near real-time Dynamic World (DW) land cover products to produce the first-of-its-kind 10 m resolution GSWE dataset representing 2015–2023. Our dataset estimated 2.5 million km 2 of permanent waters and 8 million km 2 of seasonal waters worldwide. Comparing our Sentinel-2 based data to contemporary Landsat-based GSWE, we observed that our data mapped less water within the >50% probability of occurrence range, suggesting a lower presence of open permanent water especially in high latitudes, deviating from what we previously learnt from Landsat data. Statistical analysis compared to well-established observational products and widely used GSWE datasets across some of the world’s most ecologically significant regions, including Pantanal in South America and Haor in South Asia, supports the overall physical realism of our data in predicting global open surface water dynamics. Our key contribution is a prototype Open Science operational framework that extracts routinely available DW products, runs geospatial analytics, and creates actionable water information for educators, researchers, and stakeholders at any scale of practical interest. We present examples of this operational capability through instant mapping of flood in Spain and drought in Lake Urmia, Central Asia, frequent monitoring of river extent changes at the Ganges–Brahmaputra confluence, and above all, interoperability with other existing GSWE applications.

Environmental Research Letters

An economic value of remote-sensing information—Application to agricultural production and maintaining groundwater quality

Does remote-sensing information provide economic benefits to society, and can a value be assigned to those benefits? Can resource management and policy decisions be better informed by coupling past and present Earth observations with groundwater nitrate measurements? Using an integrated assessment approach, the U.S. Geological Survey (USGS) applied an established conceptual framework to answer these questions, as well as to estimate the value of information (VOI) for remote-sensing imagery. The approach uses moderate-resolution land-imagery (MRLI) data from the Landsat and Advanced Wide Field Sensor satellites that has been classified by the National Agricultural Statistics Service into the Cropland Data Layer (CDL). Within the constraint of the U.S. Environmental Protection Agency's public health threshold for potable groundwater resources, the USGS modeled the relation between a population of the CDL's land uses and dynamic nitrate (NO3-) contamination of aquifers in a case study region in northeastern Iowa. Employing various multiscaled, multitemporal geospatial datasets with MRLI to maximize the value of agricultural production, the approach develops and uses multiple environmental science models to address dynamic nitrogen loading and transport at specified distances from specific sites (wells) and at landscape scales (for example, across 35 counties and two aquifers). In addition to the ecosystem service of potable groundwater, this effort focuses on the use of MRLI for the management of the major land uses in the study region-the production of corn and soybeans, which can impact groundwater quality. Derived methods and results include (1) economic and dynamic nitrate-pollution models, (2) probabilities of the survival of groundwater, and (3) a VOI for remote sensing. For the northeastern Iowa study region, the marginal benefit of the MRLI VOI (in 2010 dollars) is $858 million ±$197 million annualized, which corresponds to a net present value of $38.1 billion ±$8.8 billion for that flow of benefits in perpetuity. Given that these economic estimates are derived from one case study in a part of only one State, the estimates provide a lower estimate related to the potential value of the Landsat Data Continuity Mission.

Professional Paper

Follow-ons to the KidSAT/EarthKAM student remote sensing program

The KidSAT/EarthKAM program is a NASA educational initiative that allows students to develop and operate a remote sensing space program. The first phase of the program consisted of a student developed camera that is flown on Space Shuttle missions in the nadir window. A network of students develop a series of image acquisition requests, based on approved science proposals, that are combined into a set of instrument commands that are uplinked to the space shuttle. Acquired images are downlinked and archived for student access in completing their research. The International Space Station provides a unique platform for the next generation of KidSAT/EarthKAM instruments, which will allow more students to participate in the program and enable development of more sophisticated instruments. Follow-on instruments consist of Earth-looking multispectral digital sensors mounted in the optical window and on the express pallet, and radar instruments located on the express pallet. Use of the International Space Station will allow routine data acquisition and enable the instrument to be part of regular science curricula unconstrained by the Space Shuttle launch schedule.

Conference Paper

EAARL Coastal Topography and Imagery-Assateague Island National Seashore, Maryland and Virginia, Post-Nor'Ida, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Assateague Island National Seashore in Maryland and Virginia, acquired post-Nor'Ida (November 2009 nor'easter) on November 28 and 30, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar(EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral color-infrared (CIR) camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series

EAARL coastal topography and imagery-Fire Island National Seashore, New York, 2009

These remotely sensed, geographically referenced color-infrared (CIR) imagery and elevation measurements of lidar-derived bare-earth (BE) and first-surface (FS) topography datasets were produced collaboratively by the U.S. Geological Survey (USGS), St. Petersburg Coastal and Marine Science Center, St. Petersburg, FL, and the National Park Service (NPS), Northeast Coastal and Barrier Network, Kingston, RI. This project provides highly detailed and accurate datasets of a portion of the Fire Island National Seashore in New York, acquired on July 9 and August 3, 2009. The datasets are made available for use as a management tool to research scientists and natural-resource managers. An innovative airborne lidar instrument originally developed at the NASA Wallops Flight Facility, and known as the Experimental Advanced Airborne Research Lidar (EAARL), was used during data acquisition. The EAARL system is a raster-scanning, waveform-resolving, green-wavelength (532-nanometer) lidar designed to map near-shore bathymetry, topography, and vegetation structure simultaneously. The EAARL sensor suite includes the raster-scanning, water-penetrating full-waveform adaptive lidar, a down-looking red-green-blue (RGB) digital camera, a high-resolution multispectral CIR camera, two precision dual-frequency kinematic carrier-phase GPS receivers, and an integrated miniature digital inertial measurement unit, which provide for sub-meter georeferencing of each laser sample. The nominal EAARL platform is a twin-engine Cessna 310 aircraft, but the instrument was deployed on a Pilatus PC-6. A single pilot, a lidar operator, and a data analyst constitute the crew for most survey operations. This sensor has the potential to make significant contributions in measuring sub-aerial and submarine coastal topography within cross-environmental surveys. Elevation measurements were collected over the survey area using the EAARL system, and the resulting data were then processed using the Airborne Lidar Processing System (ALPS), a custom-built processing system developed in a NASA-USGS collaboration. ALPS supports the exploration and processing of lidar data in an interactive or batch mode. Modules for presurvey flight-line definition, flight-path plotting, lidar raster and waveform investigation, and digital camera image playback have been developed. Processing algorithms have been developed to extract the range to the first and last significant return within each waveform. ALPS is used routinely to create maps that represent submerged or sub-aerial topography. Specialized filtering algorithms have been implemented to determine the 'bare earth' under vegetation from a point cloud of last return elevations. For more information about similar projects, please visit the Decision Support for Coastal Science and Management website.

Data Series

Comparison of Surface Flow Features from Lidar-Derived Digital Elevation Models with Historical Elevation and Hydrography Data for Minnehaha County, South Dakota

The U.S. Geological Survey (USGS) has taken the lead in the creation of a valuable remote sensing product by incorporating digital elevation models (DEMs) derived from Light Detection and Ranging (lidar) into the National Elevation Dataset (NED), the elevation layer of 'The National Map'. High-resolution lidar-derived DEMs provide the accuracy needed to systematically quantify and fully integrate surface flow including flow direction, flow accumulation, sinks, slope, and a dense drainage network. In 2008, 1-meter resolution lidar data were acquired in Minnehaha County, South Dakota. The acquisition was a collaborative effort between Minnehaha County, the city of Sioux Falls, and the USGS Earth Resources Observation and Science (EROS) Center. With the newly acquired lidar data, USGS scientists generated high-resolution DEMs and surface flow features. This report compares lidar-derived surface flow features in Minnehaha County to 30- and 10-meter elevation data previously incorporated in the NED and ancillary hydrography datasets. Surface flow features generated from lidar-derived DEMs are consistently integrated with elevation and are important in understanding surface-water movement to better detect surface-water runoff, flood inundation, and erosion. Many topographic and hydrologic applications will benefit from the increased availability of accurate, high-quality, and high-resolution surface-water data. The remotely sensed data provide topographic information and data integration capabilities needed for meeting current and future human and environmental needs.

Scientific Investigations Report