Geology ReportsSearch

SEARCH · Geology Reports

Results for “Scanning”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

Application of electricity and underwater acoustics to clear fish from a navigation lock during maintenance

The presence of fish within navigation locks can introduce an environmental challenge for construction crews when maintenance is required. This study examined the effectiveness of a dual-deterrent fish herding technique using electricity and acoustic stimuli to reduce the abundance of fish within a navigation lock before a scheduled dewatering for maintenance. Fixed-location multi-beam imaging sonar was used to evaluate fish per minute (FPM) detections near the lock entrance before, during, and after the herding effort. Standardized mobile side-scan sonar surveys were also conducted before and after the herding to examine fish presence throughout the entire lock. Collectively, a 73% reduction in fish targets detected by side-scan sonar and a 43% reduction in FPM detected by imaging sonar were observed following the herding technique. Post-fish herding, 88% reduction in FPM >400mm and a 35% reduction in FPM <400mm were observed. Fish abundance within the lock chamber was reduced and did not result in construction delays, which was problematic and costly during previous dewatering events. Since data from this study are limited to a single lock dewatering and fish clearing event, caution should be taken with the extrapolation of these results. However, the applied methods show promise and may inform future fish clearing efforts to aid lock maintenance.

Illinois

Utilizing multi-sensor fire detections to map fires in the United States

In 2006, the Monitoring Trends in Burn Severity (MTBS) project began a cooperative effort between the US Forest Service (USFS) and the U.S.Geological Survey (USGS) to map and assess burn severity all large fires that have occurred in the United States since 1984. Using Landsat imagery, MTBS is mandated to map wildfire and prescribed fire that meet specific size criteria: greater than 1000 acres in the west and 500 acres in the east, regardless of ownership. Relying mostly on federal and state fire occurrence records, over 15,300 individual fires have been mapped. While mapping recorded fires, an additional 2,700 “unknown” or undocumented fires were discovered and assessed. It has become apparent that there are perhaps thousands of undocumented fires in the US that are yet to be mapped. Fire occurrence records alone are inadequate if MTBS is to provide a comprehensive accounting of fire across the US. Additionally, the sheer number of fires to assess has overwhelmed current manual procedures. To address these problems, the National Aeronautics and Space Administration (NASA) Applied Sciences Program is helping to fund the efforts of the USGS and its MTBS partners (USFS, National Park Service) to develop, and implement a system to automatically identify fires using satellite data. In near real time, USGS will combine active fire satellite detections from MODIS, AVHRR and GOES satellites with Landsat acquisitions. Newly acquired Landsat imagery will be routinely scanned to identify freshly burned area pixels, derive an initial perimeter and tag the burned area with the satellite date and time of detection. Landsat imagery from the early archive will be scanned to identify undocumented fires. Additional automated fire assessment processes will be developed. The USGS will develop these processes using open source software packages in order to provide freely available tools to local land managers providing them with the capability to assess fires at the local level.

Conference Paper

Morphology of glochidia of Lampsilis higginsi (Bivalvia: Unionidae) compared with three related species

Glochidia of the endangered unionid mussel Lampsilis higginsi (Lea) are morphologically similar to those of several other species in the upper Mississippi River. Life history details, such as the timing of reproduction and identity of host fish, can be readily studied if the glochidia of L. higginsi can be distinguished from those of related species. Authors used light and scanning electron microscopy and statistical analyses of three shell measurements, shell length, shell height, and hinge length, to compare the glochidia of L. higginsi with those of L. radiata siliquoidea (Barnes), L. ventricosa (Barnes), and Ligumia recta (Lamarck). Glochidia of L. higginsi were differentiated by scanning electron microscopy on the basis of a combined examination of the position of the hinge ligament and the width of dorsal ridges, but were indistinguishable by light microscope examination or by statistical analyses of measurements.

American Malacological Bulletin

DISTRIBUTION OF TRACE ELEMENTS IN COAL MINERALS OF SELECTED EASTERN UNITED STATES COALS.

The association of 34 elements with minerals found in coal was determined by a combination of analytical techniques on size and density fractions of low-temperature ash (LTA). Instrumental neutron activation analysis was used to determine the concentrations of the elements, and X-ray diffraction analysis, scanning electron microscopy, and scanning transmission electron microscopy were used to identify the minerals present in the LTA. The distribution of elemental and mineral concentrations in different size fractions was also determined. Between 35 and 60 weight percent of the LTA was composed of particles smaller than 2 mu m.

Conference Paper

SURVEYS OF COASTAL STRUCTURES USING GEOPHYSICAL TECHNIQUES.

During the summer of 1983 and the spring and summer of 1984, the authors conducted side scan sonar and shallow subbottom surveys in conjunction with bathymetric and diving surveys along three northern California coastal structures to determine the condition of the structures before extensive damage occurred. Then the applicability of the data collection techniques for condition surveys in general was evaluated. Two of the structures surveyed are the parallel jetties that protect the entrance to Humboldt Bay, California, and the third structure is the outer breakwater at Crescent City, California. It was found that the side scan sonar is an excellent tool for defining the toe of the structure; also, when waves are low, it can be useful in determining armor types and the slope of structures. The subbottom system provided information on fault and bedrock locations; however, other systems need to be tested to see if any of them can locate buried armor near the structures.

Conference Paper

Progress in the development of shallow-water mapping systems

The USGS (US Geological Survey) Coastal and Marine Geology has deployed an advance autonomous shallow-draft robotic vehicle, Iris, for shallow-water mapping in Apalachicola Bay, Florida. The vehicle incorporates a side scan sonar system, seismic-reflection profiler, single-beam echosounder, and global positioning system (GPS) navigation. It is equipped with an onboard microprocessor-based motor controller, delivering signals for speed and steering to hull-mounted brushless direct-current thrusters. An onboard motion sensor in the Sea Robotics vehicle control system enclosure has been integrated in the vehicle to measure the vehicle heave, pitch, roll, and heading. Three water-tight enclosures are mounted along the vehicle axis for the Edgetech computer and electronics system including the Sea Robotics computer, a control and wireless communications system, and a Thales ZXW real-time kinematic (RTK) GPS receiver. The vehicle has resulted in producing high-quality seismic reflection and side scan sonar data, which will help in developing the baseline oyster habitat maps.

Sea Technology

Critical minerals: Germanium and cobalt in the Bornite deposit, southwestern Brooks Range, Alaska

Increasing demand for Ge and Co has led to a renewed interest and focus on advancing our understanding of the occurrence, distribution, and sequestration of these critical elements in known ore deposits. A workflow using a variety of analytical techniques and co-registered datasets has been developed and was applied to the carbonate hosted Bornite Cu-Co (Zn,-Ge) deposit in Alaska, where a new orebody (“the South Reef”) was discovered in 2011. The South Reef is host to substantial amounts of high-grade Cu, Co, and appreciable Zn, but also contains localised elevated concentrations of Ge. We describe the mineralogy and paragenesis of the South Reef based on detailed optical petrography, scanning electron microscopy, scanning electron microscopy-based automated mineralogy, and mapping μ-X-ray fluorescence analysis. Germanium was found to exist in renierite, white mica, illite, galena and feldspars within the South Reef. Cobalt was found to occur in cobaltiferous pyrite, carrollite, and cobaltite.

Alaska

Mapping a glide avalanche with terrestrial lidar in Glacier National Park, USA

Thorough documentation of large avalanche events is important for forecasting efforts, infrastructure planning, and investigating the processes involved in avalanche formation and release. However, due in part to the isolated and dangerous nature of avalanche terrain, collecting in-situ, spatially continuous, and quantitative information surrounding avalanches remains difficult. Advances in remote sensing continue to address this knowledge gap. For example, terrestrial laser scanners (TLSs) can produce snow depth measurements at fine spatial resolutions over large areas. Repeat data acquisitions between precipitation events also allow for depth quantification atop an interface, as well as precise estimations of release volume and runout area after avalanche failure. Here, we explore the benefits of TLS-derived documentation from a large avalanche event by examining the development and release of a glide avalanche that occurred in Glacier National Park, Montana, USA, during the spring of 2022. Three sets of lidar point cloud data were acquired in the Haystack Creek drainage, focused on a well-known glide avalanche site. Lidar scans were collected after glide cracks emerged but prior to glide failure, and shortly (~ 1.5 days) after avalanche occurrence, in addition to a snow-free scan later in the year. With this temporal dataset, we were able to account for and visualize the spatial variability of snow depth across the avalanche start zone, such that we could precisely calculate the release volume (18674 m3) and average start zone depth (3.3 m) of the avalanche. Furthermore, TLS data were used to map the extent of the runout area and entrainment zone.

Montana

Modeling, mapping, and measuring the risk of freshwater invasive species across Alaska

Freshwater ecosystems of the Alaskan Arctic and Subarctic provide resources that are culturally, ecologically, and economically invaluable. Presently, these regions are relatively free of the impacts from invasive species compared to southern latitudes. To date, there have been relatively few verified introductions of aquatic invasive species (AIS) to freshwater ecosystems in Alaska. The expanding list and distribution of AIS has led to significant negative ecological and economic impacts (e.g., waterweed Elodea nuttalli ; E. canadensis and northern pike Esox Lucius introduced outside its native range in Alaska). Escalating human activity across Alaskan lands and waters, coupled with rapidly shifting environmental conditions, increases the potential for new species introductions and subsequent establishment. Creating a proactive framework for well-informed decision-making and action can improve the effectiveness of prevention efforts and bolster decision support tools that help resource managers direct limited resources. Prioritizing AIS that may be introduced and become established, as well as the locations at highest risk of invasion, is foundational to building a proactive invasive species management framework in Alaska. This project sought to identify and prioritize AIS known to be invasive in the contiguous United States, evaluate current and future habitat suitability for AIS in Alaska, and assess potential for AIS to be transported to habitats across Alaska, utilizing similar assessment methods as implemented for Bering Sea marine invasive species and non-native plants in Alaska. To accomplish this goal, the objectives of the project were to: 1) develop a formal ranked list of potential AIS to freshwater systems of Alaska; 2) assess the level of establishment risk for potential AIS by developing habitat suitability models for waterbodies across Alaska; and 3), identify potential pathways and specific vectors for high-risk AIS to invade Alaska and develop a framework for how vector analysis will be completed to understand transport risk. Overall, our goal is horizon scanning which is defined by Roy et al. (2019) as “a systematic examination of potential threats and opportunities, within a given context, and likely future developments, which are at the margin of current thinking and planning.” The scans include pathway analyses and risk screening of species present at pathway origin points, with a focus on identifying species at high risk of being introduced, becoming established, spreading, and causing harm. We refined a list of 28 AIS from a list of hundreds based on characterizations of species’ invasiveness and species’ proximity to Alaska (USGS 2020; GBIF 2022). Next, we evaluated the relative invasiveness of individual species to create an initial AIS ranking. We sought to characterize habitat suitability of AIS by selecting variables that were continental in scale, covering North America to include Alaska as well as the lower 48 states comparing natural discharge, sub-basin average terrain slope (degrees), average silt fraction, average organic carbon, lithological class, and human footprint in sub-basin in 2009. We estimated AIS habitat suitability across the entire state of Alaska using the physiological tolerances of the AIS (Appendix 2). We also evaluated pathways and vectors for the introduction of AIS (Appendix 2). Many pathways and vectors considered did not meet the criteria for Alaska or freshwater systems. Of the 28 ranked species that we categorized as very high, high, and moderate levels of invasiveness; all three risk groups included fish and mollusks (Appendix 2). One commonality of the very high-invasiveness-ranked species was the availability of Ecological Risk Screening Summary documents (USFWS, 2022) produced by U.S. Fish and Wildlife Service (USFWS), except for the goldfish ( Carassius auratus ) and the New Zealand mudsnail ( Potamopyrgus antipodarum ). The Ecological Risk Screening Summary is now available for New Zealand mudsnails. In general, fish species often ranked very high or high in invasiveness and included sportfish and aquarium fish, suggesting the importance of pathways such as aquarium trade, fishing industry, intentional (but illegal) introductions of sportfishes and aquarium fishes for establishment. The technique we used for habitat suitability models necessitated aquatic environmental datasets that were continental in scale, which was often interpolated from very coarse resolution source data layers, particularly in Alaska. Better spatial data representing aquatic environments would likely improve this approach. While the lack of introductions in Alaska and nearby provinces and states is encouraging, the lack of occurrence data for the focal species also created complications for habitat suitability modeling. Despite the challenges, the habitat suitability models indicated limited suitability for warmwater species while some species, such as Brook trout (S alvelinus fontinalis ), have high habitat suitability across Alaska no matter what threshold approach is taken. Some environmental predictors were more important than others. Specifically, the most important predictor variable, ‘frost free days,’ was critical for 15 out of 28 species as expected due to harsh winter conditions in Arctic and Subarctic regions. The second most important predictor was ‘subbasin land surface runoff’, a variable that indicates the amount of discharge and runoff, while the third most important predictor was ‘snow cover’ another indication of winter conditions. Overall, the ability to understand the effect of future climate scenarios on the establishment of AIS was challenging. A detailed dataset of freshwater temperatures and water chemistry (e.g., pH, calcium) would greatly improve the ability to predict invasiveness of freshwater species to Alaska’s ecosystems on a regional basis. Future studies may benefit from a more focused geographic scope examining a group of subbasins or a regional basin rather than the entire state. These drainages could be selected based upon the mostly likely locations of introduction pathways. The two most prevalent pathway risks for AIS are in-state transfer and stowaways/contaminants. Although there are examples of introductions from other pathways, the risk is somewhat mitigated by Alaska’s climate and regulations. However, variable application of protocols for inspection and cleaning of fishing gear, watercraft, and other similar items while traveling into Alaska as well as transferring from waterbody to waterbody within the state creates a substantial risk in introducing invasive species. We plot cumulative invasive vulnerability for all subbasins and for the top 10% of subbasins (Appendix 3).

Alaska

High resolution measurement of levee subsidence related to energy infrastructure in the Sacramento-San Joaquin Delta

We assess flood overtopping potential (when flood water elevation exceeds levee elevation) to the levees surrounding the islands in the interior of California's Sacramento-San Joaquin Delta. Because critical natural gas infrastructure is susceptible to overtopping-related disruption, we focus our analysis on regions that are crossed by the network of the state's natural gas pipelines. We use laser scanning data collected during 2015-2016 to estimate subsidence rates since 2007 when an earlier, Delta-wide, airborne laser-scanning topographic dataset was collected. For each levee studied, we combine: (1) the estimated subsidence rate, (2) a conservative range of sea-level rise projections and, (3) an estimate of the 100-year freshwater flood stage to project the time until exceedance of the federal levee height standard (PL84-99). We find that subsidence rates vary from 0-5 centimeters per year (cm/yr) with mean values of ~1-2 cm/year. Local gradients in subsidence can be on the order of cms/yr over a distance of 10s of meters parallel to the levee crests, and these types of gradients are present near some pipeline crossings. The Sherman Island region has subsidence rates close to a factor of 2 greater than other areas considered. Our projections indicate general ranges of exceedance date from about 2060 (fast sea-level rise scenario) to 2080 (slow sea-level rise scenario) with some places projected to exceed threshold by about 2050.

California

MICROCHARACTERIZATION OF ARSENIC- AND SELENIUM-BEARING PYRITE IN UPPER FREEPORT COAL, INDIANA COUNTY, PENNSYLVANIA.

Optical and scanning electron microscope as well as electron and proton microprobe techniques have been used in a detailed investigation of the modes of occurrence of arsenic and selenium in pyrite in Upper Freeport coal from the Homer City area, Indiana County, Pennsylvania. Polished blocks were prepared from columnar samples of the coal bed to represent particular zones continuously from top to bottom. Initial selection of zones to be studied was based on chemical analysis of bench-channel samples. Microprobe data indicate that the highest concentrations of arsenic (as great as 1. 5 wt. %) are apparently in solid solution in pyrite within a limited stratigraphic interval of the coal bed. Smaller amounts of arsenic and selenium (concentrations up to approximately 0. 1 and 0. 2 wt. % respectively) were detected at isolated points within pyrite grains in various strata of the coal bed.

Scanning Electron Microscopy

APPLICATIONS OF CATHODOLUMINESCENCE OF QUARTZ AND FELDSPAR TO SEDIMENTARY PETROLOGY.

Cathodoluminescence (CL), the emission of visible light during electron bombardment, was first used in sandstone petrology in the mid-1960's. CL techniques are especially useful for determining the origin and source of quartz and feldspar, two of the most common constituents in clastic rocks. CL properties of both minerals are dependent on their temperature of crystallization, duration of cooling, and/or history of deformation. Detrital quartz and feldspar are typically derived from igneous and metamorphic sources and luminesce in the visible range whereas authigenic quartz and feldspar form at low temperatures and do not luminesce. Quantification of luminescent and non-luminescent quartz and feldspar with the scanning electron microscope, electron microprobe, or a commercial CL device can allow for the determination of origin, diagenesis, and source of clastic rocks when used in conjunction with field and other petrographic analyses.

Scanning Micros

Use of geochemical mass balance modelling to evaluate the role of weathering in determining stream chemistry in five mid-Atlantic watersheds on different lithologies

The importance of mineral weathering was assessed and compared for five mid-Atlantic watersheds receiving similar atmospheric inputs but underlain by differing bedrock. Annual solute mass balances and volume-weighted mean solute concentrations were calculated for each watershed for each year of record. In addition, primary and secondary mineralogy were determined for each of the watersheds through analysis of soil samples and thin sections using petrographic, scanning electron microscope, electron microprobe and X-ray diffraction techniques. Mineralogical data were also compiled from the literature. These data were input to NETPATH, a geochemical program that calculates the masses of minerals that react with precipitation to produce stream water chemistry. The feasibilities of the weathering scenarios calculated by NETPATH were evaluated based on relative abundances and reactivities of minerals in the watershed. In watersheds underlain by reactive bedrocks, weathering reactions explained the stream base cation loading. In the acid-sensitive watersheds on unreactive bedrock, calculated weathering scenarios were not consistent with the abundance of reactive minerals in the underlying bedrock, and alternative sources of base cations are discussed.

Hydrological Processes

Uplift and subsidence reveal a nonpersistent megathrust rupture boundary (Sitkinak Island, Alaska)

We report stratigraphic evidence of land-level change and tsunami inundation along the Alaska-Aleutian megathrust during prehistoric and historical earthquakes west of Kodiak Island. On Sitkinak Island, cores and tidal outcrops fringing a lagoon reveal five sharp lithologic contacts that record coseismic land-level change. Radiocarbon dates, 137 Cs profiles, CT scans, and microfossil assemblages are consistent with rapid uplift ca. 290-0, 520-300, and 1050-790 cal yr BP, and subsidence in AD 1964 and ca. 640-510 cal yr BP. Radiocarbon, 137 Cs, and 210 Pb ages bracketing a sand bed traced 1.5 km inland and evidence for sudden uplift are consistent with Russian accounts of an earthquake and tsunami in AD 1788. The mixed uplift and subsidence record suggests that Sitkinak Island sits above a non-persistent boundary near the southwestern limit of the AD 1964 Mw 9.2 megathrust rupture.

Alaska

A framework for modeling connections between hydraulics, water surface roughness, and surface reflectance in open channel flows

This paper introduces a framework for examining connections between the flow field, the texture of the air-water interface, and the reflectance of the water surface and thus evaluating the potential to infer hydraulic information from remotely sensed observations of surface reflectance. We used a spatial correlation model describing water surface topography to illustrate the application of our framework. Nondimensional relations between model parameters and flow intensity were established based on a prior flume study. Expressing the model in the spatial frequency domain allowed us to use an efficient Fourier transform-based algorithm for simulating water surfaces. Realizations for both flume and field settings had water surface slope distributions positively correlated with velocity and water surface roughness. However, most surface facets were gently sloped and thus unlikely to yield strong specular reflections; the model exaggerated the extent of water surface features, leading to underestimation of facet slopes. A ray tracing algorithm indicated that reflectance was greatest when solar and view zenith angles were equal and the sensor scanned toward the Sun to capture specular reflections of the solar beam. Reflected energy was concentrated in a small portion of the sky, but rougher water surfaces reflected rays into a broader range of directions. Our framework facilitates flight planning to avoid surface-reflected radiance while mapping other river attributes, or to maximize this component to exploit relationships between hydraulics and surface reflectance. This initial analysis also highlighted the need for improved models of water surface topography in natural rivers.

Journal of Geophysical Research F: Earth Surface

Balancing ecology and practicality to rank waterbodies for preventative invasive species management

‘Early detection and rapid response’ (EDRR) is the most successful framework for preventative invasive species management, but prioritizing localized EDRR actions with limited resources is challenging. An approach that ranks individual locations, such as waterbodies, for EDRR by combining an invasive species' establishment risk with the practicality of managing it could help set reasonable priorities. Here, we worked with regional practitioners in Arkansas, USA, and the broader Southeastern USA to co-produce a workflow for preventative aquatic invasive species management that (1) estimates establishment risk under current and future climates with a species distribution model, (2) scores waterbodies according to difficulty of eradicating an aquatic invasive species if it were introduced and (3) combines establishment risk and eradication difficulty scores to rank waterbodies according to preventative management priority. As our focal species, we used giant salvinia ( Salvinia molesta ), a floating aquatic fern ranked among the worst weeds in the world due to its negative socio-ecological impacts and difficulty to eradicate once established. Current establishment risk is low for much of our study area, but under future climate scenarios (RCP 8.5), areas with >60% giant salvinia establishment risk increased from 546 km 2 to 30,219 km 2 between 2023 and 2040 in Arkansas. We found giant salvinia establishment risk and eradication difficulty are independent of each other ( r = 0.28), and it follows that, alone, early detection tools such as species distribution models are insufficient for managers to prioritize sites for EDRR. Practical implication : We envision our approach fitting into a potential EDRR workflow that cascades from broad- to local-scale. To illustrate, (1) horizon scanning and/or climate matching generates lists of high-risk invasive species; (2) species lists are narrowed according to eradication feasibility scores; (3) for all remaining species, all waterbodies across a geography of interest receive prioritization rankings based on establishment risk and eradication difficulty scores. Given that climate change makes predicting invasive species' distributions a moving target, combining co-produced eradication difficulty scoring with species distribution modelling will balance rigour with practicality when prioritizing locations for EDRR.

Arkansas, Louisiana, Mississippi, Missouri, Oklaho

Progressive failure of sheeted rock slopes: the 2009–2010 Rhombus Wall rock falls in Yosemite Valley, California, USA

Progressive rock-fall failures in natural rock slopes are common in many environments, but often elude detailed quantitative documentation and analysis. Here we present high-resolution photography, video, and laser scanning data that document spatial and temporal patterns of a 15-month-long sequence of at least 14 rock falls from the Rhombus Wall, a sheeted granitic cliff in Yosemite Valley, California. The rock-fall sequence began on 26 August 2009 with a small failure at the tip of an overhanging rock slab. Several hours later, a series of five rock falls totaling 736 m 3 progressed upward along a sheeting joint behind the overhanging slab. Over the next 3 weeks, audible cracking occurred on the Rhombus Wall, suggesting crack propagation, while visual monitoring revealed opening of a sheeting joint adjacent to the previous failure surface. On 14 September 2009 a 110 m 3 slab detached along this sheeting joint. Additional rock falls between 30 August and 20 November 2010, totaling 187 m 3 , radiated outward from the initial failure area along cliff (sub)parallel sheeting joints. We suggest that these progressive failures might have been related to stress redistributions accompanying propagation of sheeting joints behind the cliff face. Mechanical analyses indicate that tensile stresses should occur perpendicular to the cliff face and open sheeting joints, and that sheeting joints should propagate parallel to a cliff face from areas of stress concentrations. The analyses also account for how sheeting joints can propagate to lengths many times greater than their depths behind cliff faces. We posit that as a region of failure spreads across a cliff face, stress concentrations along its margin will spread with it, promoting further crack propagation and rock falls.

California