SEARCH · Geology Reports

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

USGS1971

Plate tectonics and magmatic evolution

The validity of the general idea of plate tectonics is accepted; the magmas evolved along the spreading ridges are thought to be largely tholeiitic basalt, although alkalic olivine basalt and ultramafic rocks of several kinds have also been dredged from them. The ultramafics may be residual from the partial melting of pyrolite while the tholeiite was being formed at shallower depths, or they may possibly be fragments of the mantle raised by the injection of sills. Bouvet and Jan Mayen Islands, both on the crest of the Mid-Atlantic Ridge, are largely composed of alkali basalt with very minor differentiates of trachyte and even rhyolite that may be readily accounted for by differentiation at a high level in the volcanic edifice. Iceland, though, has so much granite and rhyolite widely distributed that it seems likely, as suggested by several students, that its basement is sialic. The volcanic islands tend to be more alkalic the farther they are from the ridges; perhaps they rose from deeper sources in areas of low heat flow and are not related to plate margins. If the African Rifts are incipient plate margins, it is noteworthy that the magmas associated with them are wholly different from the tholeiites of the oceanic ridges. They are among the most highly alkaline of any rocks known. The magmatic activity at the subduction zones, where the plates are being destroyed, is very different. There are three varieties of these plate junctions: continental against oceanic, oceanic against oceanic, and continental against continental. In both the junctions involving oceanic crust the material being consumed includes a variable thickness of sediment, underlain by 5 or 6 km of tholeiitic basalt overlying the downgoing mantle. These rocks are much less refractory than the pyrolite of the mantle and must surely compose a large part of material parental to the magmas formed along the subduction zones, the andesites, granodiorites, and granites. There is nowhere the tremendous volume of intermediate rocks that would have had to be formed if these voluminous magmas had been products of crystallization differentiation from a basaltic magma. The presently most active of the continent-continent junctions is along the Himalayas where India is underthrusting the continent of Asia; here there is no evidence of magmatism except along the transcurrent faults at either end of the main range. But there are large volcanic and plutonic masses that have no obvious relation to the plate boundaries active in Mesozoic and Cenozoic time. The Eogene volcanics of the San Juans and the Neogene volcanics of the Yellowstone are more than 1,500 km from any obvious subduction zone, and these regions of magmatic activity seem no more closely related to subduction zones than are the Tertiary igneous rocks of West Texas, the Cretaceous tuffs and plutons of Arkansas, the Cretaceous intrusives of the Monteregian Hills, and the minor Tertiary intrusives of Virginia.

Washington↗

USGS2014

Mineral resource of the month: vermiculite

Vermiculite comprises a group of hydrated, laminar magnesium-aluminum-iron silicate minerals resembling mica. They are secondary minerals, typically altered biotite, iron-rich phlogopite or other micas or clay-like minerals that are themselves sometimes alteration products of amphibole, chlorite, olivine and pyroxene. Vermiculite deposits are associated with volcanic ultramafic rocks rich in magnesium silicate minerals, and flakes of the mineral range in color from black to shades of brown and yellow. The crystal structure of vermiculite contains water molecules, a property that is critical to its processing for common uses. Using a process called exfoliation-in which vermiculite flakes are heated to 900 degrees Celsius or higher, causing water within the flakes to flash to steam and expand-crude vermiculite ore is processed into particles that are eight to 20 times larger. The resulting lightweight material is chemically inert and fire resistant, with low density and low thermal conductivity. It is also odorless, has high liquid absorption capacity and catalytic properties. Because it is lightweight and thermally insulating, vermiculite is used in general building plasters and concrete products, alone or combined with other lightweight aggregates such as perlite. Special plasters, in which vermiculite is combined with binders like gypsum or portland cement, fillers or other additives, provide fire protection and soundproofing. As insulation, exfoliated vermiculite, sometimes treated with a water repellent, is used to fill pores and cavities in masonry construction and hollow blockwork to enhance acoustic properties, fire rating and insulation performance. Exfoliated vermiculite can also be used to produce refractory and insulation concretes and mortars, and to make high-temperature binders for construction materials, gaskets, specialty papers, textiles and vehicle brake linings. Finer grades of exfoliated vermiculite can be used to produce various shapes of insulation pellets, high-temperature insulation, as a primary component in cementitious coatings, and as a filler in inks, paints, plastics and other materials. Vermiculite can absorb liquids such as fertilizers, herbicides and insecticides, which can then be transported as free-flowing solids. It is used in the fertilizer and pesticide markets because of its ability to act as a bulking agent, carrier and extender. In horticulture, exfoliated vermiculite improves soil aeration and moisture retention, and when mixed with peat or other composted materials, such as pine bark, vermiculite produces a good growing medium for plants. As a soil conditioner, exfoliated vermiculite improves aeration in clay-rich soils and water retention in sandy soils, while reducing the likelihood of compaction, cracking and crusting of the soil. For more information on the commercial use of vermiculite, visit minerals.usgs.gov/minerals/ .

Earth↗

USGS2020

Genomic architecture and repertoire of the rainbow trout immunoglobulin light chain genes

The genomic loci encoding the four immunoglobulin light chains (IgL1, IgL2, IgL3, and IgL4) in the Swanson trout genome assembly were annotated in order to provide a measurement of the potential IgL repertoire. IgL1 and IgL3 gene segments are co-localized on chromosomes 21, 18, 15, and 7 while IgL2 and IgL4 were found on chromosomes 13 and 17, respectively. In total, 48 constant (C L ), 87 variable (V L ), and 59 joining (J L ) productive genes are described. Pairwise alignment of the V L segments revealed that they belong to nine different families, three of which (kappa IV, V, and VI) are described for the first time in this study. V L and C L sequences on chromosome 15 and 21 and those on chromosomes 7 and 18 clustered together in phylogenetic analysis. PCR was used to examine IgL C L and V L genes in 9 lines of rainbow trout. IgL4 in the Hot Creek and Golden trout lines was missing 42 nucleotides resulting in a loss of 14 amino acids. The sigma IV variable family was completely absent from the Swanson, Arlee, Hot Creek, and wild type lines and silenced in the Skamania line with the addition of 176 bp mini-satellite insert. Similarly, the Whale Rock, Arlee, and wild type lines were all found to encode two sigma II products, a functional 252 bp product and a larger 425 bp product that contained a 172 bp insert. Results from this study indicate that there are genomic differences in IgL repertoire between different lines of trout that could affect humoral immune responses post vaccination and during disease.

Developmental and Comparative Immunology↗

USGS1977

Organic geochemistry, lithology, and paleontology of Tertiary and Mesozoic rocks from wells on the Alaska Peninsula

Core chips and drill cuttings from eight of the nine wells drilled along the Bering Sea lowlands of the Alaska Peninsula were subjected to lithologic and paleontologic analyses. Results suggest that at least locally, sedimentary rocks of Tertiary age contain oil and gas source and reservoir rocks capable of generating and accumulating liquid and gas hydrocarbons. Paleogene strata rich in organic carbon are immature. However, strata in offshore basins to the north and south may have been subjected to a more productive thermal environment. Total organic carbon content of fine grained Neogene strata appears to be significantly lower than in Paleogene rocks, possibly reflecting nonmarine or brackish water environments of deposition. Neogene sandstone beds locally yield high values of porosity and permeability to depths of about 8,000 feet (2,439 m). Below this depth, reservoir potential rapidly declines. The General Petroleum, Great Basins No. 1 well drilled along the shore of Bristol Bay reached granitic rocks. Other wells drilled closer to the axis of the present volcanic arc indicate that both Tertiary and Mesozoic sedimentary rocks have been intruded by dikes and sills of andesite and basalt. Although the Alaska Peninsula has been the locus of igneous activity throughout much of Mesozoic and Tertiary time, thermal maturity indicators such as vitrinite reflectance and coal rank suggest, that on a regional scale, sedimentary rocks have not been subjected to abnormally high geothermal gradients.

Open-File Report↗

USGS2005

Acid-rock drainage at Skytop, Centre County, Pennsylvania, 2004

Recent construction for Interstate Highway 99 (I?99) exposed pyrite and associated Zn-Pb sulfide minerals beneath a >10-m thick gossan to oxidative weathering along a 40-60-m deep roadcut through a 270-m long section of the Ordovician Bald Eagle Formation at Skytop, near State College, Centre County, Pennsylvania. Nearby Zn-Pb deposits hosted in associated sandstone and limestone in Blair and Centre Counties were prospected in the past; however, these deposits generally were not viable as commercial mines. The pyritic sandstone from the roadcut was crushed and used locally as road base and fill for adjoining segments of I?99. Within months, acidic (pH<3), metal-laden seeps and runoff from the exposed cut and crushed sandstone raised concerns about surface- and ground-water contamination and prompted a halt in road construction and the beginning of costly remediation. Mineralized sandstones from the cut contain as much as 34 wt. % Fe, 28 wt. % S, 3.5 wt. % Zn, 1% wt. Pb, 88 ppm As, and 32 ppm Cd. A composite of <2 mm material sampled from the cut face contains 8.1 wt. % total sulfide S, 0.6 wt. % sulfate S, and is net acidic by acid-base accounting (net neutralization potential ?234 kg CaCO3/t). Primary sulfide minerals include pyrite, marcasite, sphalerite (2 to 12 wt. % Fe) and traces of chalcopyrite and galena. Pyrite occurs in mm- to cm-scale veinlets and disseminated grains in sandstone, as needles, and in a locally massive pyrite-cemented breccia along a fault. Inclusions (<10 ?m) of CdS and Ni-Co-As minerals in pyrite and minor amounts of Cd in sphalerite (0.1 wt. % or less) explain the primary source of trace metals in the rock and in associated secondary minerals and seepage. Wet/dry cycles associated with intermittent rainfall promoted oxidative weathering and dissolution of primary sulfides and their oxidation products. Resulting sulfate solutions evaporated during dry periods to form intermittent ?blooms? of soluble, yellow and white efflorescent sulfate salts (copiapite, melanterite, and halotrichite) on exposed rock and other surfaces. Salts coating the cut face incorporated Fe, Al, S, and minor Zn. They readily dissolved in deionized water in the laboratory to form solutions with pH <2.5, consistent with field observations. In addition to elevated dissolved Fe and sulfate concentrations (>1,000 mg/L), seep waters at the base of the cut contain >100 mg/L dissolved Zn and >1 mg/L As, Co, Cu, and Ni. Lead is relatively immobile (<10 ?g/L in seep waters). The salts sequester metals and acidity between rainfall events. Episodic salt dissolution then contributes pulses of contamination including acid to surface runoff and ground water. The Skytop experience highlights the need to understand dynamic interactions of mineralogy and hydrology in order to avoid potentially negative environmental impacts associated with excavation in sulfidic rocks.

Open-File Report↗

USGS2019

Berea Sandstone petroleum system

Since 2011, production of sweet high gravity oil from the Upper Devonian Berea Sandstone in northeastern Kentucky has caused the region to become the leading oil producer in the state. Remarkably, Berea oil is being produced at depths of 2,200 ft or less and in an area in which the prospective source rocks—the overlying Mississippian Sunbury Shale and underlying Devonian Shale—are interpreted to be immature for oil production. Further downdip, the Berea appears to produce primarily gas in the oil window. The economic viability of Berea production is also a function of reservoir porosity and permeability.

Kentucky↗

USGS2026

The Great Lakes Geologic Mapping Coalition—Working collaboratively to understand the geology of the Great Lakes Region

Introduction The Great Lakes Geologic Mapping Coalition (GLGMC), commonly referred to as the “Coalition,” is a partnership between the U.S. Geological Survey (USGS), the U.S. States of Illinois, Indiana, Michigan, Minnesota, New York, Ohio, Pennsylvania, and Wisconsin and the Canadian province of Ontario. The member States receive funding for geologic mapping work from the USGS National Cooperative Geologic Mapping Program (NCGMP), whereas Ontario participates as a nonfunded partner. The mission of the GLGMC is to produce three-dimensional (3D) geologic maps that depict unconsolidated sediments and near-surface bedrock in the Great Lakes region of North America. Geologic maps are the basis of most earth science investigations and help support resource exploration (energy, minerals, groundwater), natural hazard mitigation, infrastructure development, and land-use planning, all of which can be used to advance economic development and strengthen national security in the Great Lakes region. During the last few million years, the Great Lakes region has experienced repeated glacial advances and retreats, leaving behind extensive sediments, abundant natural resources, and widespread effects on the underlying bedrock geology (Swezey and others, 2022). Linked by shared histories of past glaciations, industrial agriculture, and legacy automotive, coal, steel, and manufacturing industries, the GLGMC member States collaborate to improve the understanding of the 3D distribution of the sediments overlying the region’s bedrock (fig. 1). Developing a comprehensive subsurface 3D framework of this glaciated terrain can provide earth science data to policymakers at all levels. These insights facilitate informed decisions on the exploration, use, and protection of vital resources, such as critical minerals, industrial materials, and aquifers, thereby supporting economic prosperity and the well-being of the citizens of this region. Since its inception in 1998, the Coalition has completed more than 100 geologic mapping projects across the Great Lakes region. Each project aims to deliver geologic maps, 3D datasets, and other information that improves understanding of the geology of the Great Lakes region, with an emphasis on economic and water resources. Key deliverables include 3D geologic maps and models typically portraying sediment thickness, often derived from top-of-bedrock and borehole data. These products are developed through a combination of fieldwork, subsurface modeling, and the collection and analysis of rock and sediment cores. To support Coalition goals, member States collaborate with scientists working on related STATEMAP, EDMAP, and FEDMAP projects. Coalition scientists also engage with Tribal Nations in the Great Lakes region to ensure that Tribal interests pertaining to Coalition work are addressed. Through this collaboration, the Coalition unites the efforts of State, Federal, and Tribal Nation stakeholders to advance geologic data production and enhance understanding of the geologic resources of the Great Lakes region.

Illinois, Indiana, Michigan, Minnesota, New York, ↗

USGS1990

Geology and origin of the late Proterozoic Darb Zubaydah ophiolite, Kingdom of Saudi Arabia

The Late Proterozoic (830 ± 20 Ma) Darb Zubaydah ophiolite, north-central Arabian Shield, preserves a largely intact section consisting of ultramafic rocks, gabbro, diabase, granodiorite, and interbedded volcanic and sedimentary rocks. Formation of these rocks within or near an island arc is indicated by the absence of pelagic sediments and the abundance of pillow basalt, turbiditic sediments, lahar deposits, and basaltic to rhyolitic tuff. The oldest extrusive rocks, which range from tholeiites with MORB characteristics to calc-alkaline andesites and rhyolites, formed in a young, relatively un-evolved island are or in a back-arc basin sufficiently close to an arc to receive calc-alkaline lava flows and coarse-grained, arc-derived detritus. tus. Overlying turbidites and lahar deposits of the Kaffan sandstone point to the initiation of a rifting event. High-Ti basalts, which erupted above the Kaffan sandstone, and related diabase are interpreted to be magmatic products of incipient intra-arc rifting. Renewed arc volcanism produced calc-alkaline volcanic rocks that interfingered with the high-Ti basalt and later dominated the section as the volcanic apron of the arc prograded basinward. Extrusion of voluminous calc-alkaline tuff may have been contemporaneous with intrusion of granodiorite and gravity-driven landsliding.

Geological Society of America Bulletin↗

USGS2017

Partitioning of pyroclasts between ballistic transport and a convective plume: Kīlauea volcano, 19 March 2008

We describe the discrete ballistic and wind-advected products of a small, but exceptionally well-characterized, explosive eruption of wall-rock-derived pyroclasts from Kīlauea volcano on 19 March 2008 and, for the first time, integrate the size distribution of the two subpopulations to reconstruct the true size distribution of a population of pyroclasts as it exited from the vent. Based on thinning and fining relationships, the wind-advected fraction had a mass of 6.1 × 10 5 kg and a thickness half distance of 110 m, placing it at the bottom end of the magnitude and intensity spectra of pyroclastic falls. The ballistic population was mapped, in the field and by using structure-from-motion techniques, to a diameter of > 10–20 cm over an area of ~0.1 km 2 , with an estimated mass of 1 × 10 5 kg. Initial ejection velocities of 50–80 m/s were estimated from inversion of isopleths. The total grain size distribution was estimated by using a mass partitioning of 98% of wind-advected material and 2% of ballistics, resulting in median and sorting values of −1.7 ϕ and 3.1 ϕ . It is markedly broader than those calculated for the products of magmatic explosive eruptions, because the grain size of 19 March 2008 clast population is unrelated to a volcanic fragmentation event and instead was “inherited” from a population of talus clasts that temporary blocked the vent prior to the eruption. Despite a conspicuous near-field presence, the ballistic subpopulation has only a minor influence on the grain size distribution because of its rapid thinning and fining away from source.

Hawaii↗

USGS1993

Epigenetic sulfide mineralization associated with Pennsylvanian paleokarst in eastern Iowa, U.S.A.

Paleokarst-associated, sulfide-bearing mineral deposits are wide-spread in the Paleozoic carbonate rocks of eastern Iowa. Minerals occur in nodules enclosed in karst-filling mudstones, as sandstone cements, and as surface coatings on, and fracture fillings in, foundered carbonate rock clasts. Mineralogy and paragenetic sequence vary among the occurrences. Sulfur isotopic compositions exhibit wide variations within and among deposits (??34S = -33.8 to + 35.1???). Oxygen isotopic compositions of fracture-filling calcite spars (??18O = -8.41 to + 3.60???) are similar to the isotopic compositions of their carbonate rock hosts. Calcite spars are somewhat depleted in ??13C relative to host rock [??13C (spars) = - 5.66 to + 0.24??? vs. -1.54 to + 1.21??? (host rock)]. Results of mineralogic, paragenetic and isotopic investigations suggest that: (1) minerals are products of multiple events operating on a local, rather than a regional scale; (2) spatially-disjunct fracture-filling mineral deposits exposed in the same quarries are probably not cogenetic with paleokarst-associated deposits; (3) paleokarst-filling calcite spars formed at near-surface temperatures; and (4) paleokarst-associated deposits are probably not cogenetic with Upper Mississippi Valley ZnPb pitch-flat deposits. ?? 1993.

Chemical Geology↗

USGS2018

Crustal inheritance and a top-down control on arc magmatism at Mount St Helens

In a subduction zone, the volcanic arc marks the location where magma, generated via flux melting in the mantle wedge, migrates through the crust and erupts. While the location of deep magma broadly defines the arc position, here we argue that crustal structures, identified in geophysical data from the Washington Cascades magmatic arc, are equally important in controlling magma ascent and defining the spatial distribution and compositional variability of erupted material. As imaged by a three-dimensional resistivity model, a broad lower-crustal mush zone containing 3–10% interconnected melt underlies this segment of the arc, interpreted to episodically feed upper-crustal magmatic systems and drive eruptions. Mount St Helens is fed by melt channelled around a mid-Tertiary batholith also imaged in the resistivity model and supported by potential–field data. Regionally, volcanism and seismicity are almost exclusive of the batholith, while at Mount St Helens, along its margin, the ascent of viscous felsic melt is enabled by deep-seated metasedimentary rocks. Both the anomalous forearc location and composition of St Helens magmas are products of this zone of localized extension along the batholith margin. This work is a compelling example of inherited structural control on local stress state and magmatism.

Washington↗

USGS1985

Conceptual model for origin of abnormally pressured gas accumulations in low-permeability reservoirs

The largest gas fields in the Rocky Mountain region occur in abnormally pressured reservoirs. These gas accumulations are different from more conventional gas accumulations in that they are commonly located in basin-center positions, they occur downdip from water-bearing rocks, and they are in overpressured or underpressured low-permeability reservoirs. We suggest that overpressured and underpressured gas accumulations of this type have a common origin. In basins containing overpressured gas accumulations, rates of thermogenic gas accumulation exceed gas loss, causing fluid (gas) pressure to rise above the regional hydrostatic pressure. Within the overpressured gas generation zone, free water in the larger pores is forced out of the gas generation zone into overlying and updip, normally pressured, water-bearing rocks. The remaining tightly bound water, at irreducible saturation levels, cannot remove dissolution products, precluding significant permeability and porosity enhancement. Thus, while other diagenetic processes continue, a pore network with very low permeability develops. As a result, gas accumulates in these low-permeability reservoirs at rates higher than it is lost. In basins containing underpressured gas accumulations, rates of gas generation and accumulation are less than gas loss. These basins have typically experienced significant uplift and erosion and/or temporal variations of paleotemperature. Despite these modifications, the basin-center gas accumulation persists, but because of changes in the basin dynamics, the overpressured accumulation evolves into an underpressured system.

American Association of Petroleum Geologists Bulle↗

USGS1978

U.S. Geological Survey offshore program of resource and geo-environmental studies and topical investigations, Pacific-Arctic region

The Geological Survey's marine geology investigations in the Pacific-Arctic area are presented in this report in the context of the underlying socio-economic problem of expanding the domestic production of oil and gas and other mineral and hard- and soft-rock resources while maintaining acceptable standards in the marine environment. The primary mission of the Survey 's Pacific-Arctic Branch of Marine Geology is to provide scientifically interpreted information about the (1) resource potential, (2) geo-environmental setting, and (3) overall geologic characteristics of the continental margins (that is, the continental shelf, slope and rise) and adjacent deeper water and shallower coastal areas off California, Oregon, Washington, Alaska and Hawaii and also, where it is of interest to the U.S. Government, more remote deep-sea areas of the Pacific-Arctic realm.

Open-File Report↗

USGS2010

Augustine Volcano - The influence of volatile components in magmas erupted A.D. 2006 to 2,100 years before present: Chapter 16 in The 2006 eruption of Augustine Volcano, Alaska

The petrology and geochemistry of 2006 eruptive products of Augustine Volcano, Alaska, have been investigated through analyses of whole-rock samples, phenocrysts, silicate melt inclusions, and matrix glasses to constrain processes of magma evolution, eruption, and degassing. Particular attention was directed toward the concentrations and geochemical relationships involving the magmatic volatile components H 2 O, CO 2, S, and Cl. The analytical results for 2006 samples have been integrated with data for samples of Pleistocene basalt, prehistoric andesites, and 1986 andesites from Augustine to provide a broad view of volatile behavior in Augustine magmas. The observation of generally similar geochemical features for this range of eruptions indicates that magmatic and volatile degassing processes have been relatively consistent during the past 2,100 years. Augustine andesites range from low-silica to high-silica compositions and contain phenocrysts of plagioclase, orthopyroxene, and clinopyroxene, with lesser olivine, amphiboles, iron-titanium oxides, and apatite. The groundmass varies from strongly crystallized and/or oxidized to comparatively clear, microlite-poor vesicular glass. Coexisting iron-titanium oxides of 2006 rock samples, which are generally consistent with those of prior eruptive materials, indicate &fnof; O2 values of approximately NNO+1.5 to NNO+2.5 and oxide crystallization temperatures of 835 to 1,052°C. The compositions of matrix and melt-inclusion glasses range from rhyodacite to rhyolite and show relationships that reflect magma evolution involving fractional crystallization and multiple stages of mingling and/or mixing. In particular, melt inclusions of low-silica andesites express mixing of magmas with more widely varying compositions, than do melt inclusions of high-silica andesites and dacites. The melt inclusions of 2006, 1986, and prehistoric andesites contain moderate to high concentrations of H 2 O and Cl and lesser CO 2 and SO 2 . Comparing the abundances of H 2 O, CO 2 , and Cl in these melt inclusions with experimentally established volatile solubilities for felsic melts indicates that the 2006 and prehistoric samples are most consistent with the ascent of fluid-saturated magmas containing 1 weight percent of H 2 O-enriched vapor under closed-system conditions and that pressures of volatile phase exsolution range from 150 to less than 20 MPa. This closed-system behavior was maintained to quite shallow depths prior to eruption, and this pressure range is consistent with constraints derived from 2006 geodetic measurements indicating magma storage and crystallization at 4 to 6 km and upwards to near-surface depths. The magmatic fluids were relatively oxidizing and included H 2 O-enriched and HCl-, H 2 S-, S 2 -, and SO 2 ± CO 2 -bearing vapors; hydrosaline aqueous liquids largely enriched in Cl - , SO 4 2- , alkalis, and H 2 O; and moderately saline, H 2 O-poor liquids containing Cl - , SO 4 2- , and alkali elements.

Alaska↗

USGS2020

Geologic map of the northern Harrat Rahat volcanic field, Kingdom of Saudi Arabia

Harrat Rahat, in the west-central part of the Kingdom of Saudi Arabia, is the largest of 15 Cenozoic harrats (Arabic for “volcanic field”) distributed on the Arabian plate. It extends more than 300 km north-south and 50 to 75 km east-west, and it covers an area of approximately 20,000 km 2 , has a volume of approximately 2,000 km 3 , and encompasses more than 900 observable vents. Volcanism commenced around 10 Ma and has continued into historic time, the most recent eruption occurring in 1256 C.E. Volcanic products are dominated by alkali basalt and hawaiite lava flows, with subordinate mugearite lava flows, as well as benmoreite and trachyte lava flows, domes, and pyroclastic flows. This geologic map distinguishes 239 eruptive units that cover an area of 3,340 km 2 in northern Harrat Rahat and the adjacent city of Al-Madinah. Results are presented as a geologic map of the study area at 1:75,000 scale and of smaller regions of particular interest at 1:25,000 scale, along with interpretive text. Most units are basaltic lava flows that erupted from the broadly north-northwest-trending main vent axis that constructed the topographic crest of the volcanic field. This 300- to 400-m-high vent axis, which has a width of 6 to 10 km, lies in the eastern one-third of northern Harrat Rahat. Basalt and hawaiite lava flows can extend as far as 27 km from their vents, but most are 10 to 15 km long. Evolved products such as mugearites, benmoreites, and trachytes are less extensive; the trachytic pyroclastic flows extend as far as 9 km from their source vents, although most only reach 4 to 6 km. Vents of the evolved products are restricted to the main vent axis or its flanks. No volcanic rocks older than 1.2 Ma are exposed in the map area, and about 90 percent of the exposed volcanic rocks erupted during the past 570 thousand years. As depicted on the geologic maps, eruption ages and field relations define 12 eruptive stages for northern Harrat Rahat for the past 1.2 million years. Other important geochronological findings include (1) several late Pleistocene lava flows near Al-Madinah, which previously were interpreted as Holocene from archeological evidence; (2) the eruption age of a cluster of cinder cones and small lava flows in the western outskirts of Al-Madinah (previously ascribed to an eruption in 641 C.E.) is actually 13.3±1.9 ka, close to the Pleistocene-Holocene boundary; and (3) only two Holocene eruptions have been identified in the map area, those of the historically described basalt of Al Labah in 1256 C.E. and the dome and pyroclastic flows of the trachyte of Um Rgaibah at 4.2±5.2 ka.

Scientific Investigations Map↗

USGS1974

Recommendations for the study and appraisal of oil-shale deposits in Jordan

A geologic-geochemical evaluation conducted October 5-24, 1968, both in the field area and in the laboratories has shown the Upper Cretaceous oil shale in the El Lajjun area of central Jordan to be one of Jordan's major natural mineral resources. Continued but slightly modified investigations are strongly recommended to determine the exact volume and quality of this oil shale. Further, a study to determine the most efficient processes of extraction of the oil and possible co-products should be initiated. The economic potential of the oil shale is excellent, but the actual exploitation of this rock will depend on national economic and political factors that cannot be interpreted at this time. From a realistic point of view, regardless of these factors which inevitably change with time, systematic investigations and planning for construction of extraction plants for domestic production of fuel and/or other products from the oil shale should be completed at the earliest possible date, to assure rapid utilization of this mineral resource when necessary.

Open-File Report↗

USGS2018

The Mystic subterrane (partly) demystified: New data from the Farewell terrane and adjacent rocks, interior Alaska

The youngest part of the Farewell terrane in interior Alaska (USA) is the enigmatic Devonian–Cretaceous Mystic subterrane. New U-Pb detrital zircon, fossil, geochemical, neodymium isotopic, and petrographic data illuminate the origin of the rocks of this subterrane. The Devonian–Permian Sheep Creek Formation yielded youngest detrital zircons of Devonian age, major detrital zircon age probability peaks between ca. 460 and 405 Ma, and overall age spectra like those from the underlying Dillinger subterrane. Samples are sandstones rich in sedimentary lithic clasts, and differ from approximately coeval strata to the east that have abundant volcanic lithic clasts and late Paleozoic detrital zircons. The Permian Mount Dall conglomerate has mainly carbonate and chert clasts and yielded youngest detrital zircons of latest Pennsylvanian age. Permian quartz-carbonate sandstone in the northern Farewell terrane yielded abundant middle to late Permian detrital zircons. Late Triassic–Early Jurassic mafic igneous rocks occur in the central and eastern Mystic subterrane. New whole-rock geochemical and isotopic data indicate that magmas were rift related and derived from subcontinental mantle. Triassic and Jurassic strata have detrital zircon age spectra much like those of the Sheep Creek Formation, with major age populations between ca. 430 and 410 Ma. These rocks include conglomerate with clasts of carbonate ± chert and youngest detrital zircons of Late Triassic age and quartz-carbonate sandstone with youngest detrital zircons of Early Jurassic age. Lithofacies indicating highly productive oceanographic conditions (upwelling?) bracket the main part of the Mystic succession: Upper Devonian bedded barite and phosphatic Upper Devonian and Lower Jurassic rocks. The youngest part of the Mystic subterrane consists of Lower Cretaceous (Valanginian–Aptian) limestone, calcareous sandstone, and related strata. These rocks are partly coeval with the oldest parts of the Kahiltna assemblage, an overlap succession exposed along the southern margin of the Farewell terrane. Our findings support previous models suggesting that the Farewell terrane was proximal to the Alexander-Wrangellia-Peninsular composite terrane during the late Paleozoic, and further suggest that such proximity continued into (or recurred during) the Late Triassic–Early Jurassic. But middle to late Permian detrital zircons in northern Farewell require another source; the Yukon-Tanana terrane is one possibility.

Alaska↗

USGS1982

Mineral resource potential map of the Rock Pile Mountain Wilderness Study area, Madison County, Missouri

Although the Rock Pile Mountain Wilderness Study Area is within the general boundary of the Southeast Missouri mining district, it has no record of mineral production and there is no mining or prospecting activity at present. Exploratory drill holes on private land along the west side of the area encountered no economic mineralization. Neither the Precambrlan volcanic rocks nor the Cambrlan sedimentary rocks contain any detectable evidence of economic mineralization. The area has no potential for coal resources, an unfavorable potential for oil and gas, and no known potential for geothermal energy. The volcanic rocks might be suitable for use as crushed stone, but similar rocks occur abundantly in more favorable locations elsewhere.

Missouri↗