Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Mineral Commodity Summaries”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

323 records · Page 17Linked to original sources
USGS2024

The advantages of electric-grade heat storage in long closed-loop wells

Though long (e.g., tens of kilometers) closed-loop geothermal wells are under consideration for the extraction of subsurface heat, these wells might also serve as an efficient energy storage mechanism for electricity generation. Using a semi-analytic model solution, the potential for electric-grade heat storage as a function of ambient temperature (e.g., corresponds to depth of loop), well length, well diameter, and flow rate is evaluated. The following simplified cases for comparison of standard closed loop operation with energy storage operation were considered: [1] constant flow rate and constant temperature (90 °C) injection to represent the standard closed-loop base-case; and [2] constant flow rate and annual cycle sinusoidal temperature (90-150 °C) to represent seasonal (summer) charging while solar resources are peak. Initial temperatures for all scenarios considered herein are a uniform 175 °C. Electric-grade heat is assumed to be delivered whenever temperatures at the extraction point exceed 90 °C. For calculation purposes only, if temperature falls below 100 °C, it is assumed that heat delivered is sub-economic, so no electricity would be produced. For all scenarios, temperatures at the extraction well asymptotically approach the flow-weighted average injection temperature, but energy storage scenarios exhibited a damped time-varying signal that diminishes in magnitude with length of the loop. The asymptotic approach depends on initial temperatures in the rock and the heat extraction rate (a function of well diameter and flowrate). This analysis demonstrates that shorter closed loops can produce more electricity over time than longer closed-loops previously proposed for electricity production over typical engineering design lifetimes (e.g., 30 years). Although only a high-temperature scenario is considered herein, rock that is initially below boiling temperature would not host a standard closed-loop resource, but injection of hot water seasonally would asymptotically heat this low-temperature system to temperatures capable of electricity production. In other words, regardless of initial temperatures, closed loops could be used to store electricity with no critical minerals in the geothermal battery.

Conference Paper↗
USGS2026

Towards a refined definition of “tidal influence” for the coastal wetland sciences

The astronomical tide relates to lunar (and to a lesser extent solar) influences on rising and falling water bodies, and is a key control of many coastal processes. However, tides manifest along coastal margins in different ways to muddle application beyond Sir Isaac Newton’s first descriptions. Here, we argue that tide, or specifically “tidal,” has not been adequately defined for the coastal wetland sciences to facilitate contemporary interdisciplinary distinction for rapidly changing coastlines and future climate adaptation planning. We provide a brief history of the tidal concept, and we describe tides in a diversity of uncommonly recognized marginal coastal environments. Common astronomical tide manifestations are described through hydrographic examples, then expanded to include those tidal environments exposed additionally to fluvial, meteorological (wind), or groundwater influences. Our expanded definition of “tidal” is intended to be a forward-looking construct as environments will inevitably change with sea-level rise, water extraction, and anthropogenic flow alteration. Our definition of wetland tidal influence, which we broaden, includes those “wetlands affected by astronomic water level fluctuations within coastally restricted environments causing frequent or infrequent surface inundation or groundwater tidal variation that affects the biogeochemistry of the soil (e.g., ion exchange capacity, oxygen state, mineralization processes)”. Astronomic water level fluctuations are often amplified or dampened by non-astronomical events, such as wind. Expanding the definition of what is considered tidal by the scientific community is critical for improved understanding of coastal wetland function and the suite of ecosystem services they provide people and society, including climate mitigation opportunity, management, and adaptation.

Wetlands↗
USGS2025

Time-varying rates of organic and inorganic mass accumulation in southeast Louisiana marshes: Relationships to sea-level anomalies and tropical storms

Louisiana's coastal wetlands are complex systems that require a continuous input of organic and inorganic material to keep pace with relative sea-level rise. Coastal restoration projects such as sediment diversions are being implemented to mitigate land loss and increase availability of inorganic sediment to coastal wetlands, and marshes specifically rely on organic material to build soil volume and maintain surface elevation. Interannual-to-decadal sea-level anomalies such as hurricanes can affect marsh accretion, mineral deposition, and plant productivity. In this light, complex ecogeomorphic feedback controls whether a marsh surface is sustainable or eroded/drowns. This study performs some of the first differential vertical accretion rates (VARs) and organic and inorganic mass accumulation rates (MARs) over time in SE Louisiana marshes determined from the 210 Pb Constant Rate of Supply model, coupled with standard 137 Cs VARs. These accumulation rates over the past ∼100 years were measured from a total of six brackish and salt marsh locations in Barataria Basin near the proposed Mid-Barataria Sediment Diversion. They were then related to interannual sea-surface elevations at Grand Isle, Louisiana, over the last ∼60 years and recorded hurricane activity in the delta. Results show VARs range from 0.63 cm/y to 1.69 cm/y and total MARs range from 0.11 to 0.43 g/cm 2 /y. Temporally, VARs and MARs (total, inorganic, and organic) are characterized by gradual increases in rates with decreasing age along with episodic peaks in VARs and MARs. The findings of this study indicate that no relationship occurs between sea-level anomalies and VARs or organic and inorganic MARs; however, a strong relationship appears to occur between major hurricanes to VAR and MAR contributions. Furthermore, high water content (81 ± 8%) and organic-rich soils in the sediment cores highlight the significance of belowground biomass and associated pore volume in maintaining marsh elevation in the study area.

Louisiana↗
USGS2025

The δ13C signature of dissolved organic and inorganic carbon reveals complex carbon transformations within a salt marsh

Coastal wetlands have high rates of atmospheric CO 2 uptake, which is subsequently respired back to the atmosphere, stored as organic matter within flooded, anoxic soils, or exported to the coastal ocean. Transformation of fixed carbon occurs through a variety of subsurface aerobic and anaerobic microbial processes, and results in a large inventory of dissolved carbon. Carbon source and the roles of aerobic respiration, sulfate reduction, and methane cycling were evaluated within salt marsh peat and the underlying sandy subterranean estuary. There is a large increase in dissolved inorganic carbon (DIC, 7,350 ± 3,900 μmol L −1 ), dissolved organic carbon (DOC, 1,040 ± 1,480 μmol L −1 ) and CH 4 (14.5 ± 33.3 μmol L −1 ) within the marsh porewaters compared to creek waters. Alkalinity production (5,730 ± 2,170 μeq L −1 ) and sulfate removal (1,810 ± 1,970 μmol L −1 ) indicate anaerobic respiration, however, relative contributions from the various decomposition pathways cannot be identified due to overlapping geochemical signatures. The δ 13 C of the DOC (−29.0 ± 3.7‰) and DIC (−11.2 ± 1.1‰) produced within the marsh differed from the bulk soil organic matter δ 13 C (−14.5 ± 0.2‰). We explore a variety of mechanisms that could result in co-occurring depleted δ 13 C-DOC and enriched δ 13 C-DIC compared to the bulk soil organic carbon pool and salt marsh vegetation, including selective mineralization, production of δ 13 C-depleted bacterial biomass, and methane-derived DOC. While important questions remain about carbon cycling pathways, we found evidence of a cryptic methane cycle. Alteration of the δ 13 C of carbon species complicates source attribution in solid and dissolved phases and careful consideration should be used when carbon is partitioned between in situ salt marsh production and external marine and terrestrial sources.

Massachusetts↗
USGS2025

Regional characterization of coal resources in the U.S. Gulf Coast

There is increasing interest in extracting critical minerals (CM), including rare earth elements (REE), from coals in the United States to address the overreliance on imported REE. The U.S. Gulf Coast and the Williston basins are the two major lignite-bearing basins within the country. Recent REE and CM studies of the lignite in these basins have indicated that the coals may be a viable source material for REE and CM extraction. To evaluate in-place coal as a potential source of REE and CM, the coal resources need to be quantified. This study presents the results of a regional analysis of the U.S. Gulf Coast lignite and bituminous coal resources that might be available as potential sources of REE and CM. The resource analysis used kriging methods to develop isopleth maps of cumulative coal thickness throughout the region using data from 31,181 drill holes and other data points. The estimated total coal resource in the Gulf Coast is about 83 billion metric tons in the upper 90 m (~ 300 ft) of the subsurface. Texas accounted for 40 percent (32 billion metric tons) of the total resource, followed by Mississippi (24 %, 20 billion metric tons), Louisiana (14 %, 12 billion metric tons), Tennessee (10 %, 8.5 billion metric tons), and Arkansas (6 %, 5.1 billion metric tons). The remaining states each accounted for less than 5 percent of the total resource. Georgia had the smallest resource estimated at 7 million metric tons. Here we report the first known state-wide lignite resource estimates for Georgia, Kentucky (820 million metric tons), and Missouri (1,800 million metric tons). A comparison of the results of this study with those of previous Gulf Coast and Williston Basin resource studies is difficult because each study used different data sources, assessment methodologies, overburden depths, and qualifying coal thicknesses. Coal-power electric generation has sharply decreased in past decades and mining of these coals for CM and REE could provide additional co-products such as activated carbon and other uses such as fertilizer (soil enhancer).

EarthArXiv↗
USGS2025

Comparison of creek and bay influences on salt marsh sediment budget and deposition patterns

The resilience of salt marshes with low organic production depends on their effective capture and retention of mineral sediment from adjacent waters. Little prior work has directly compared mechanisms of sediment import from wave-influenced marsh boundaries against those of tidal creeks. We used simultaneous deployment of net-deposition tiles and oceanographic sensors to identify the timing and magnitude of sediment import/export to, and redistribution within, a marsh in south San Francisco Bay. As the marsh has both an eroding bay-exposed scarp and a prominent tidal creek, we investigated the mechanisms and magnitudes of sediment import from the marsh-bay versus the marsh-creek interface. The strong daily sea breezes of the summer season produced most of the wave-driven erosion of the marsh scarp and controlled suspended sediment concentrations; the winter season had weaker winds punctuated by a few storms. A large seasonal difference in suspended sediment concentrations influenced both flood and ebb sediment fluxes to the marsh and led to much higher rates of import in the summer. Both bay-side and creek-side processes were important to total marsh sediment budget. Bay-side sediment contributions were more variable in time due to the bay-influenced environment, and creek-side contributions were overall larger, reflecting the large proportion of the marsh fed by creek water. Sediment was redistributed throughout the system, with erosion near the bay-edge, accretion near the creek-edge and slow import to the marsh interior. The marsh was net importing sediment in the summer and exporting in the winter from different rates of these processes; on an annual scale, the marsh was net importing despite rapid lateral marsh loss. These findings emphasize that a positive sediment budget does not imply a stable marsh and that both creek- and edge-side dynamics are important for marsh sedimentation and geomorphic trajectories. Further, we expand understandings of non-storm and seasonal controls on marsh sedimentation.

California↗
USGS2024

Geophysical characterization of mine influenced groundwater and surface water in the Mayflower section of the Animas River, Bonita Peak Mining District, Silverton Colorado

This report details findings from geophysical investigations to identify possible groundwater - surface water interactions near the Mayflower Section of the Animas River in Silverton, Colorado. The Mayflower Section is a mine influenced Superfund Site in Colorado. This investigation utilized electromagnetic induction (EM or EMI), magnetic, and fiber optic distributed temperature system (FODTS) geophysical methods to measure the bulk earth electrical conductivity, magnetic susceptibility, and temperature of specific surveyed volumes of the earth near the Mayflower Section of the Animas River. These physical parameters are used to understand the groundwater – surface water interactions, which can guide decision makers in their assessment of mine-impacted surface water. This report details the results from characterization and monitoring technologies to provide high data density and continuous monitoring of bulk earth electrical conductivity and temperature in the Mayflower section of the Animas River to identify zones of groundwater – surface water interactions and potential metal loading from mine influenced water. The investigation separated right and left bank characterization for each method and indicates more groundwater is entering from the right bank than the left bank and these predominantly right bank discharges potentially contain metal-rich water compared to the left bank. Results also indicate mineral veins facilitate preferential groundwater discharge to the river due to possible jointing, fractures, and permeability differences sometimes occurring along veins relative to host rock. For example, Boulder Gulch is likely groundwater dominated and may be receive water impacted by Mayflower Impoundments #1 and #2. Additionally, the beaver ponds near Blair Gulch may influence groundwater discharge and Mayflower Impoundment #4 is possibly impacting groundwater and surface water and may be connected to the wetlands to the west of the impoundment. These data could be further analyzed for smaller spatial scale analysis within areas of interest. The identification of these locations along sections of the river likely impacted by mine influenced groundwater potentially entering the Animas River and can be used by site investigators, decision makers, and stakeholders in mitigation decisions and strategies.

Colorado↗
USGS2025

Phase 1 technical implementation plan for the expansion of the ShakeAlert earthquake early warning system to Alaska

Executive Summary The conference report accompanying the fiscal year (FY) 2022 Consolidated Appropriations Act (Public Law 117–103) for the U.S. Department of the Interior and related agencies directed the U.S. Geological Survey (USGS) to “work with the State of Alaska to develop an implementation plan to be completed within two years in order to put ShakeAlert/Earthquake Early Warning in Alaska” (p. 29). Congress included $1 million in the FY 2022 appropriation to conduct this effort. The USGS Earthquake Hazards Program, along with partner organizations, has developed the ShakeAlert earthquake early warning (EEW) system for the West Coast, which currently operates in California, Oregon, and Washington. The purpose of the system and its alert delivery partners is to reduce the impact of earthquakes and save lives and property by delivering ShakeAlert-powered alerts that are transmitted to the public via mass notification technologies, and by providing more detailed data streams to institutional users and commercial service providers to trigger automated, user-specific, protective actions. ShakeAlert was designed in such a way that it could be expanded to other U.S. regions with high earthquake risk, after the build-out of seismic and geodetic networks to support ShakeAlert in a specified region is completed and the necessary funding is secured for long-term operation and maintenance. When an earthquake occurs, seismic waves radiate from the rupturing fault like waves on a pond. It is these waves that people feel as earthquake shaking and that can cause damage to structures. Using networks of ground-motion sensors and sophisticated computer algorithms, ShakeAlert can detect an earthquake seconds after it begins, calculate its location and magnitude, and estimate the resulting intensity of shaking. Early warnings of impending shaking are then sent to people and systems that may experience damaging shaking, allowing them to take appropriate protective actions. Depending on the user’s distance from the earthquake, alerts may be delivered before, during, or after the arrival of strong shaking. There will almost always be a region near the earthquake epicenter where alerts arrive after damaging shaking has begun. The ShakeAlert system updates its ground-motion estimates as an earthquake grows larger. In response to the FY 2022 congressional direction, the USGS worked with the State of Alaska to devise this implementation plan for ShakeAlert expansion to Alaska. The USGS engaged with the Alaska Division of Homeland Security and Emergency Management (DHS&EM) and the Alaska Division of Geological and Geophysical Surveys (DGGS). A cooperative agreement was awarded to the Alaska Earthquake Center (AEC) at the University of Alaska Fairbanks (UAF) for their contributions to the plan and their work coordinating with other networks in Alaska. The USGS engaged with the Alaska Seismic Hazards Safety Commission (ASHSC) throughout the process. The USGS also held a series of Alaska stakeholder engagements. The process of developing the implementation plan was facilitated by contracted staff from Corner Alliance, which is a government consulting firm. This implementation plan describes the details and estimates the costs for a Phase 1 expansion of the ShakeAlert system to Alaska. A geographically limited Phase 1 goal was chosen that covers the highest risk and most populated areas of Alaska. The areas proposed encompass the State’s main population centers and 90 percent of the State’s population. This Phase 1 design is considered very challenging and ambitious from the viewpoint of network operators. The lessons learned if this plan is implemented could be used to consider subsequent phases to expand EEW beyond Phase 1 in Alaska in the future. ShakeAlert is built on the foundation of the sensor networks and data processing infrastructure of the USGS-led Advanced National Seismic System (ANSS). This implementation plan calls for a total of 450 high-quality, real-time EEW-capable ANSS seismic stations in Alaska: 270 new stations, 160 upgraded stations, and 20 existing stations. These seismic station numbers are based on a station spacing of 10 kilometers (km) in urban areas, 20 km in seismic source areas that endanger population centers, and 40 km in other areas. The associated costs also include support for some EEW-capable global navigation satellite system (GNSS) stations, with a focus on improving warnings for large subduction zone earthquakes. For effective EEW, ShakeAlert requires low-latency, high-availability, robust telemetry links to deliver continuous, real-time data from field stations to the data centers. The Alaska data processing hardware infrastructure would follow the general design for fail-safe operation that is used for the ShakeAlert system on the West Coast. The ShakeAlert architecture uses two independent layers: the production layer for earthquake processing and the alert layer to make alerting decisions and serve alerts to users. This implementation plan includes two geographically separated data centers in Alaska, each with two fully independent production and alert layers using the same system design developed for the West Coast. As of March 2024, the ShakeAlert system is at version 3.0.1, with more advanced versions in the development and testing pipeline. ShakeAlert originally used two algorithms to determine the location and magnitude of earthquakes using seismic data. A third algorithm that can calculate very large magnitudes of very large earthquakes with geodetic data was added in March 2024. ShakeAlert publishes several data and alert products to meet the needs of different users. All messages include the location of the earthquake, either as a point or a line, and its magnitude. Ground-shaking estimates are published in two forms, as ground-motion contours and a map grid. Providing adequate warning time for strong shaking (the “target threshold”) requires sending alerts at a threshold lower than that strong shaking level (the “alert threshold”). The thresholds for public alerting in Alaska would be a joint USGS and State decision. To have the greatest benefit, ShakeAlert-powered alerts would be delivered to institutional users and individuals by all practical pathways. The USGS alert layer can support thousands of institutional users and alert redistributors, but the USGS does not have the mission nor the infrastructure and expertise to perform mass notifications to the public or implement automatic actions for end users of the alerts. To meet this need, ShakeAlert recruits private sector “technology enablers” that have the necessary expertise to develop end-user implementations using EEW alerts with the goal of stimulating an EEW industry. Earthquake early warning alerts are useless if people do not know how to respond to them. Although the alert messages include instructions about what to do (drop, cover, and hold on), alerts are more effective if people have been trained in advance. Messages about ShakeAlert’s capabilities, limitations, and benefits could be integrated with existing earthquake education programs, including State-run programs. Therefore, ShakeAlert would coordinate with both public and private partners and stakeholders through various partnerships and agreements to accomplish consistent and ongoing public earthquake hazard education. The estimated capital cost of completing the computing infrastructure and sensor networks for the Phase 1 ShakeAlert expansion to Alaska is approximately $66 million in 2024 dollars. The annual operation and maintenance cost of the completed system is estimated to be $12 million per year in 2024 dollars when fully built out.

Alaska↗
USGS2026

Mountain goat declines in a protected, interior, native population

A shifting climate poses threats to alpine-adapted species including mountain goats. We used long-term (12 years) citizen science monitoring data and Bayesian N-mixture modeling to estimate population trends and drivers of population metrics among mountain goats in Glacier National Park (GNP). Median goats per site ( n = 37 sites) declined by 45% (95% credible interval [CRI] = 32%, 57%) from 77.8 (95% CRI = 64.4, 95.1) in 2008 to 42.3 (95% CRI = 34.3, 52.2) in 2019, with consistent declines from 2008 until 2015, when the number of estimated goats stabilized. The decline exceeds IUCN criteria for classifying a population as vulnerable, >30% declines over only two generations. Across years, relatively few goats occupied northwestern GNP. Goat numbers declined the most at northeastern sites, trended toward decline in most southern sites, and increased at only two west-central sites. The proportion of permanent snow and glaciers, the presence of natural mineral licks, and habituation strongly increased the initial abundance of goats in the area. Weather variables had the greatest influence on population growth rates, particularly precipitation between May 15 and June 15 of the previous summer, the neonatal period. Lower growth occurred with less snow water equivalent and lower mean winter temperature, early summer temperature, and early summer precipitation. Projected reductions of permanent snow, increasing spring and summer temperatures, and insufficient and variable spring precipitation raise concerns for the future of native goats in this region. Our analyses reveal ways to improve detection rates of goats during surveys, which is important for optimizing the precision of estimates and the power to detect future trends. Detection increased with goat habituation, retention of observers with experience, use of binoculars, and conducting surveys at lower temperatures and earlier dates. Improving detection will be particularly important given the lower number of goats currently observed in the park. Research to estimate park-wide population size, evaluate genetic structure and diversity, assess changing habitat, human recreation levels and forage, and forward-project climate effects on persistence will be crucial to understanding the context of these results and conserving this iconic, metapopulation at the southern edge of the distribution of native mountain goats.

Montana↗
USGS2026

Magmatic source of the opening phase of Kīlauea’s 2018 Lower East Rift Zone eruption

The 2018 eruption of Kīlauea volcano in its Lower East Rift Zone began with the discharge of evolved high-Ti basalt as weak lava fountains and short, slow-moving lava flows. The lavas were quickly geochemically recognized as being derived from magmas stored within the rift zone and remobilized by a new intrusion, a sequence that is common at Kīlauea. This initial phase of the 2018 eruption, referred to as phase 1a, lasted for 6 days and was followed by extrusion of mixed magma after a 3-day pause. Even though remobilization of older rift zone magmas is common within Kīlauea’s rift zones, it is difficult to determine which past intrusion(s) may have initially emplaced those stored magmas. This difficulty stems from the tendency for Kīlauea magmas to follow very similar differentiation paths without significant variations in major, minor, or even trace element chemistry. We investigate possible magma sources for the lavas erupted during phase 1a of the 2018 eruption using whole-rock, mineral, and glass major and trace element compositions from historical East Rift Zone eruptions with adjacent fissures. We consider two primary hypotheses for the phase 1a source: magmas associated with the 1955 Lower East Rift Zone eruption or the nine eruptions in the Middle and Upper East Rift Zone during the 1960s. Our results suggest that magma associated with the earliest phases of Kīlauea’s 1955 eruption was the most likely source of the 2018 phase 1a remobilized magma. We determine volatile saturation pressures from melt inclusion chemistry and find similar storage depths for the 2018 phase 1a and early 1955 magmas. The phase 1a and early 1955 lavas are nearly indistinguishable in all of the compositional criteria considered, implying that the leftover 1955 magma body barely cooled and differentiated in the 63 years between eruptions (cooling rates of ~0.1 °C/year). This study sheds light on the potential for protracted storage of eruptible magmas in rift zones at Kīlauea, and highlights some of the challenges and solutions to identifying genetic relationships between magmas at Kīlauea.

Hawaii↗
USGS2025

Scientific opportunities in the National Landscape Conservation System

The National Landscape Conservation System consists of unique and beautiful places across America’s landscapes where identified resources and values are protected and science is highlighted. The mission of the National Landscape Conservation System (NLCS), which is managed by the Bureau of Land Management and is often referred to as the agency’s National Conservation Lands, is to conserve, protect, and restore nationally significant landscapes for their cultural, ecological, and scientific values. This clear inclusion of science in the NLCS mission sets the stage for individual units to serve as places of learning, teaching, discovery, and innovation. Science is an integral part of managing the National Conservation Lands, and science conducted within and across the more than 900 units that make up the NLCS can inform and influence conservation and public land management well beyond its boundaries. Here, we highlight seven core aspects of National Conservation Lands that present valuable science opportunities: (1) the scientific values for which individual units are designated; (2) the many other resources, objects, and values within units; (3) the value of units as “control” sites for understanding the effects of activities such as mineral extraction that commonly occur elsewhere on multiple-use public lands but are often prohibited within National Conservation Lands; (4) the value of units for studying the effects of activities such as recreation that regularly occur and may be intensified on National Conservation Lands; (5) the high visibility of units, which draws strong interest and engagement from scientists, partners, and the public; (6) the functioning of the units as a network managed for a common purpose, which provides an opportunity to explore cross-cutting science questions across widely varying contexts and geographies; and (7) the opportunities units provide to promote and apply Indigenous Knowledge to scientific research to manage natural and cultural resources. Because of all of these characteristics, National Conservation Lands can serve as hubs for basic and applied science that can inform management of all public lands and resources into the future. We highlight these science opportunities through examples from existing units and suggest two actions that could help further science activities and impact on National Conservation Lands.

Parks Stewardship Forum↗
USGS2026

Rare earth element potential in coal and coal ash in the U.S. Gulf Coast

United States heavy reliance on imports of critical minerals (CMs), including rare earth elements (REEs), underscores the importance of development of domestic sources. The study objective was to quantify CM and REE concentrations in coal and coal ash in the US Gulf Coast region. CM and REE concentrations were measured for 118 samples from outcrops and 14 mines in the Gulf Coast. Results show that total REE + Yttrium (REY) concentrations (dry coal basis) are comparable to those of the upper continental crust (UCC) with localized hot spots, such as the Texas Gibbons Creek mine (REY ≤ ~ 2860 ppm). When normalized to UCC REY concentration (169 ppm, dry coal basis), REY to UCC ratios for Gulf Coast coal samples range from 0.1 to 17 (median ratio 0.6). REE extractability from lignites is high (median: 63%–93%) using environmentally benign weak acid. In addition to raw coal, coal ash from power plants could also serve as an REE source with a median ratio of REY in ash relative to coal of 4; however, extractability from coal ash is generally much lower (≤ 5% using the same weak acid as in coal). The median basket price for extracted REY as oxides from coal, assuming 70% extractability, is $3.2 per tonne of coal and $186 billion based on 58 billion metric tonnes of dry coal in the Gulf Coast. REEs important for magnets (Pr + Nd + Tb + Dy) account for ~ 80% of the total value. The corresponding median basket price for extracted REY as oxides from coal ash, assuming ~ 30% extractability, is ~$4.4 per tonne of ash and $1.2 billion based on 258 million tonnes of ash. REE production from coal would likely require co-products, such as activated carbon or humic acids, to attain economic viability. Production of REEs from coal ash could offset remediation costs related to potential water contamination. This reconnaissance study shows the potential for REE production from coal and coal ash in the Gulf Coast; however, carbon coproducts and/or societal benefits would likely be required for socioeconomic viability.

Alabama, Florida, Louisiana, Mississippi, Texas↗
USGS2026

Stream sediment sources in Medicine Creek, northern Missouri and southern Iowa

This report presents the results of a cooperative study by the U.S. Geological Survey and Missouri Department of Natural Resources to quantify sediment transport source contributions in the Medicine Creek drainage basin. Understanding relative source contributions provides valuable information for selecting the conservation practices that may be most effective in reducing sediment and sediment-associated nutrient transport in the Medicine Creek drainage basin and similar areas of the Lower Grand River drainage basin. Sediment samples were collected from potential contributing areas (source samples) and from fluvial-transported samples (target samples). Source sample types included streambanks, row crop fields, and a combined pastures and forests category. Samples were analyzed for particle size and quantity of carbon, nitrogen, stable isotopes of carbon and nitrogen, and 49 mineral elements as potential tracers. Results for the carbon stable isotope ratio of carbon-13/carbon-12 (δ 13 C) and concentrations of total carbon, total nitrogen, calcium, potassium, and copper were selected by discriminant function analysis as the best combination of multiple tracers to differentiate each source type. The discriminant function analysis poorly differentiated pastures and forests, so these source types were combined. The sources defined by the discriminant function analysis were then used in an unmixing model to apportion sources for each target sample. In the study area, transported sediment was predominantly bank sediment, with an overall average of 86.9 percent of suspended-sediment samples and depositional streambed samples attributed to bank material. Suspended-sediment samples from the mainstem of Medicine Creek were dominated by bank sediments (average of 95.8 percent), and depositional streambed samples from throughout the drainage basin had more variable source contributions with an average of 71.1 percent attributed to bank material. The relative importance of upland sources (row crop fields and the combined pastures and forests category) varied seasonally and with streamflow but was not related to land use or drainage basin size. Relative contributions from upland sources were greater in the summer through winter rather than spring and during lower streamflow, though this may be driven by the seasonality of streamflow. These results indicate management practices that reduce bank erosion could be effective strategies for managing the dominant source of sediment and sediment-associated phosphorus.

Iowa, Missouri↗
USGS2025

Properties of solid bitumen formed during hydrous, anhydrous, and brine pyrolysis of oil shale: Implications for solid bitumen reflectance in source-rock reservoirs

Solid bitumen reflectance (BR o in %) is widely used as a thermal maturity proxy in source-rock reservoirs, yet solid bitumen texture and physical attributes may be affected by varying environmental constraints during its formation, e.g., water saturation, mineral catalysis, or salinity. Herein we investigated the development of solid bitumen properties during artificial maturation using three diverse (lacustrine to marine) oil shale samples containing abundant amorphous H-rich sedimentary organic matter (bituminite). The oil shales were treated via pyrolysis (320 °C, 72 h) using hydrous, anhydrous, and brine conditions, causing the development of a newly formed solid bitumen in the experiment residues from the thermal conversion of bituminite. The properties of the newly formed solid bitumen then were evaluated via geochemical screening tests, optical and electron microscopy, and infrared spectroscopy. Experimental residues also were treated via solvent extraction, allowing characterization of the effects of extraction on solid bitumen. Results showed that bituminite with higher resin and asphaltene components evolved to a solid bitumen with higher reflectance (as a percentage of the original value) when exposed to the same heat treatment, relative to bituminite with higher saturate and aromatic components. Aromatization of solid bitumen also was generally more pronounced in the presence of deionized water relative to anhydrous conditions, supporting prior observations. These results suggest the compositions of primary sedimentary organic matter, and the local concentration of water, affect the development of solid bitumen during thermal advance, potentially explaining the origin of multiple solid bitumen populations with varying reflectance in source-rock reservoir samples or in a single microscope field. Experiments using brine were inconclusive regarding enhanced/decreased aromatization, which could be attributed to the salinities of the brines used in the tests. Extraction of residues caused a consistent increase in BR o values, suggesting that migrating or expelled oils could cause an increase in BR o via natural solvation and absent an increase in temperature. This work provides insights into the development and evolution of BR o in source-rock reservoirs as a function of the composition of the original bituminite and changing environmental conditions, with potentially broad application for petroleum prospecting and resource estimation.

Colorado↗
USGS2026

Tephra from Kīlauea’s 2008–2018 lava lake eruption—Proximal deposits and dispersal characteristics

A network of ten buckets was established early in the 2008–2018 summit eruption at Kīlauea to collect proximal tephra ejected from the new, informally named the “Overlook crater”; the buckets were emptied on most days of the eruption thereafter. This report summarizes the results of more than 2,400 different sampling intervals (most 1–3 days long) during the eruption, focusing on the physical and dispersal characteristics of the tephra deposits. The network was within about 300 meters south of the vent to capture tephra dispersed by the dominant northeast trade wind. The juvenile tephra mainly reflected spattering at the southeast (SE) sink, a downwelling area in the southeastern part of the lava lake in the Overlook crater that remained in the same area throughout the eruption, with admixtures of solid rock and secondary minerals derived from the wall of the crater. The proportion of juvenile material to lithic material ranged widely early in the eruption but was generally greater than 90 percent for the last 6 years of the eruption as lake level rose and the crater walls decreased in height and became more stable. The accumulation rate of tephra at each bucket was strongly dependent on the location of the bucket and reflects the interplay between lava lake level and wind direction and speed. The mass per unit area (m/a) of collected tephra was a maximum of about 97 kilograms per square meter for the entire eruption, equivalent to a thickness of about 75 millimeters. Thirty-two explosive events with a volcanic explosivity index of −2 to −4 deposited much of the tephra in the network. Fifteen of these rock-fall-induced events occurred within 6 days of one another. Pele’s hair, a volcanic glass predominantly associated with quieter activity at the vent in the final half of the eruption, was dispersed more than 60 kilometers downwind from the lava lake and formed a nearly continuous deposit near the Overlook crater. This eruption was probably the most frequently sampled long-lasting eruption in history, but most of the deposits are ephemeral. The collected samples, although generally of small mass, are retained by the Hawaiian Volcano Observatory and are available for detailed study.

Hawaii↗
USGS2026

Geochemical geodatabase of sedimentary strata (coal, coal-adjacent rocks, tuffaceous oil shale, phosphate-rich rocks) and produced water in the Uinta region, Utah and Colorado

The Geochemical Geodatabase of Sedimentary Strata (Coal, Coal-adjacent Rocks, Tuffaceous Oil Shale, Phosphate-rich Rocks) and Produced Water in the Uinta Region, Utah and Colorado, consists of compiled datasets acquired as part of the Carbon Ore, Rare Earth, and Critical Mineral (CORE-CM) Uinta Region assessment funded by the U.S. Department of Energy (DEFE0032046, 2021–2024; Birgenheier et al., 2024). The CORE-CM assessment focused on providing comprehensive geological and geochemical characterization of current and prospective sedimentary-hosted resources including coal, oil shale, phosphatic limestone, and produced water from oil and gas targets present in eastern Utah and northwestern Colorado (Figure 1). This Data Series includes a geodatabase that consists of analytical geochemical data collected September 2021 through December 2024 via portable X-ray fluorescence (pXRF), and laboratory measured analyses produced by inductively coupled plasma mass spectrometry (ICP-MS) and inductively coupled plasma optical emission spectroscopy (ICP-OES). The coal-related geochemical data are derived primarily from the Cretaceous Blackhawk Formation and Ferron Sandstone of Utah, and the Mesaverde Group of Colorado. Additional non-coal resources assessed include oil shale-bearing strata of the Eocene upper Green River Formation (Utah and Colorado), phosphate-rich limestone of the Permian Park City Formation (Utah) and produced water from oil and gas-bearing strata of the Eocene Green River and Wasatch Formations (Uinta Basin) and the Pennsylvanian Paradox Formation (Paradox Basin) (Table 1). The CORE-CM assessment included a wide range of lithologies present in the coal, oil shale, and phosphate geologic resource systems whether or not the specific lithology has current economic value. Geochemical analyses of produced water from oil and gas wells focused on current and emerging hydrocarbon targets in the central Uinta Basin and northern Paradox Basin. A total of 13,092 geochemical analyses from these geologic systems is provided in the included geodatabase. A series of coal quality data (e.g., composition and maceral analyses) is also included in the database and was digitized from archived coal samples from the Utah Geological Survey (Appendix A).

Colorado, Utah↗
USGS2025

Igneous differentiation in arcs

This chapter assesses crystallization-differentiation of convergent-margin magmas both from the standpoints of natural rock suites and from laboratory phase-equilibrium experiments. Crystallization-differentiation of dry subalkaline and alkaline basalts are summarized at the beginning for reference and context. Experiments crystallizing arc basalts through andesites at middle to upper crustal pressures (100–400 MPa), saturated either with H 2 O or mixed H 2 O-CO 2 , produce liquid lines of descent similar to arc igneous suites, with higher f O 2 s giving results closer to calc-alkaline magma series. Early enrichment of melts in SiO 2 with little or no enrichment in FeO* (total Fe as FeO) comes about by the combined effects of H 2 O suppressing crystallization of plagioclase relative to olivine, shifting plagioclase to more calcic – therefore lower SiO 2 – compositions, and suppressing silicate minerals to greater extents than Fe-rich spinel. Also contributing to SiO 2 enrichment is crystallization near the liquidus of higher proportions of olivine relative to calcic clinopyroxene, compared with MORB, but it is unclear if this is brought about by H 2 O or elevated pressure. Exhumed arc terranes, however, generally fail to expose evidence for primitive liquids having reached and differentiated at middle to upper crustal depths, at least in any abundance. Instead, most differentiation in arcs appears to take place in the lower crust or near the crust-mantle transition, and although hydrous experiments at such pressures produce liquids broadly similar to arc suites in their SiO 2 enrichment, the experimental liquids differ in becoming peraluminous at early stages of differentiation while melts have basaltic, basaltic andesitic, or andesitic SiO 2 concentrations. Crystallization of abundant calcic clinopyroxene close to the liquidus causes the high-pressure experimental liquids to become peraluminous with only small increases in SiO 2 concentration. In contrast, natural arc volcanic and plutonic suites become gradually less metaluminous with increasing SiO 2 , crossing to peraluminous at dacitic to rhyolitic SiO 2 concentrations. Hybridism, encompassing magma-mixing, assimilation of old crust, and incorporation of near-solidus melts from only shortly older deep, antecedent arc intrusions may accompany natural crystallization-differentiation, preventing melts from attaining peraluminous compositions at low-SiO 2 concentrations. If so, then nearly all arc suites are to substantial extents composites, rather than preserving simple, progressive liquid lines of descent. Some comments and assessments are also made on the participation of garnet in arc differentiation and on the production of arc batholiths.

Book chapter↗
USGS2025

Geologic map of the Buckner 7.5-Minute quadrangle, Louisa County, Virginia

The Buckner 7.5-minute quadrangle straddles three terrane boundaries in the Piedmont Physiographic Province in central Virginia: the Chopawamsic terrane, the Elk Hill Complex, and the Goochland terrane. In much of the map area, the Elk Hill Complex separates the Chopawamsic and Goochland terranes. Rocks of the Chopawamsic terrane include Ordovician metavolcanic and metasedimentary rocks of the Chopawamsic Formation, Ordovician to Silurian granodiorite sheet intrusions, and Paleozoic mafic intrusions. Silurian to Devonian rocks of the Quantico Formation, mostly garnet-mica schist, crop out in the northwesternmost part of the map area, and are in unconformable contact with rocks of the Chopawamsic Formation on the southeastern limb of the Quantico synclinorium. The main map unit in the Elk Hill Complex is Neoproterozoic mica gneiss, which is in pre-metamorphic fault contact with rocks of the Chopawamsic Formation to the west. The main map unit of the Goochland terrane is the Maidens Gneiss. Except for Jurassic diabase dikes, all rocks on the Buckner 7.5-minute quadrangle were metamorphosed to amphibolite facies during the Alleghanian orogeny and preserve multiple compositional and phyllosilicate penetrative foliations. Evidence of amphibolite-facies metamorphism during the Taconic orogeny is preserved in rocks of the Elk Hill Complex. The entire width of the Maidens Gneiss on the Buckner 7.5-minute quadrangle is within the Spotsylvania high-strain zone and amphibolite-facies mylonitic textures are pervasive. Quartz veins and Jurassic diabase dikes crosscut all older rocks of the quadrangle. Multiple levels of terrace deposits are present along and near the major streams of the quadrangle. The lower terrace deposits are likely remnants of former positions of the Little River on the landscape, whereas higher deposits may be remnants of former deposits of the Atlantic Coastal Plain that covered this portion of the Piedmont Province. A linear cluster of aftershocks from the magnitude 5.8 earthquake that occurred near Mineral, Virginia, in 2011 defines the Fredericks Hall fault, which is at depth on the Buckner quadrangle. Most of the aftershocks occurred in the core of the Elk Creek antiform and have no relation to faults mapped at the surface. Several abandoned crushed stone and building stone quarries, as well as a mica prospect, exist in the quadrangle.

Virginia↗