SEARCH · Geology Reports

Results for “Marine Structures”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

USGS1958

Geology of Kapingamarangi Atoll, Caroline Islands

Kapingamarangi Atoll of the Caroline Islands consists of a peripheral reef, 1000-4000 feet across, surrounding a nearly circular lagoon which is 5 by 6 nautical miles in area and about 240 feet at maximum depth. Thirty-three islands, most of which are less than half a mile in length, are scattered along the eastern half of the peripheral reef. At least 75 patch reefs, most of which are small, nearly symmetrical mounds, rise to the surface of the lagoon. The peripheral reef and the patch reefs, composed largely of the stony structures of corals and coralline algae, have flat upper surfaces, apparently the result of bevelling by waves during a recent lowering of sea level. The islands on the peripheral reef are formed of partially consolidated stratified sediments composed of clastic limestone particles and the shells of marine animals. These islands are migrating lagoonward across the reef flat because of erosion on the seaward sides and the growth of beaches and bars on the opposite sides. Soils on the islands are poorly developed and retain much of the texture, structure, and composition of the parent rock or sediment. They consist chiefly of mechanical mixtures of carbonaceous material and lime gravel, lime sand, or lime mud. Phosphorite is present on some islands and is still forming locally where apatite derived from bird guano is reacting with limestones. The tidal fluctuation of ground-water lenses, determined on islands of several sizes, ranges from about 4 to 18 inches. In one very small island where the water is brackish, the rise is much greater. The time lag between tidal movements and the rise and fall of fresh water in the islands ranges from a few minutes on very small islands up to 5 hours on some large ones. This time lag is controlled by the permeability of rocks composing an island and varies from one area to another according to the distribution of rock types. The lagoon contains six concentric belts of bottom sediment; in each, the composition and texture depend on the depth of water in which it occurs. Lime sand and lime gravel derived for the most part from the shells of animals form most of the sediment, but a lime mud covers the bottom of the deepest parts of the lagoon. Waves and currents cause gradation between types of sediment to a depth of about 30 feet, but little mixing was detected at greater depths.

Kapingamarangi Atoll, Caroline Islands↗

USGS1977

Deposition of the Tapeats Sandstone (Cambrian) in central Arizona

Grain size, bedding thickness, dispersion of cross-stratification azimuths, and assemblages of sedimentary structures and trace fossils vary across central Arizona; they form the basis for recognizing six facies (A through F) in the Tapeats Sandstone. Five of these (A through E), present in western central Arizona, are marine deposits containing the trace fossil Corophioides ; several intertidal environments are represented. The association of large-scale cross-bedding (50 to 300 cm) that is characterized by compound cross-stratification, numerous reactivation surfaces, and herringbone patterns is typical of facies A and generally typical of the finer-grained, thinner-bedded facies B. The sedimentary structures and polymodal distribution of foreset azimuths common to facies A and B probably formed on intertidal sand bars during emergence and late-stage tidal runoff. Facies C consists of well-sorted sandstone, gently cross stratified or with continuous parallel stratification, and foresets tangential to the lower bedding surface. This facies generally occurs where the gradient of the depositional surface increases; it apparently was deposited on a beach by shoaling waves. Facies D and, to a lesser extent, the coarser-grained facies E are sandstones with trough cross-stratification, fining-upward cycles, abundant intercalated thin shale and sandstone, rare flaser bedding, and local bipolar distribution of foreset azimuths. Both facies are tidal flat deposits; facies D was probably produced by meandering tidal channels, whereas facies E was likely produced by migration of braided tidal channels. The sixth facies (F), present in eastern central Arizona, is an arkosic small-pebble conglomerate that lacks trace fossils; low dispersion of foreset azimuths and large-scale (1 to 11-m wide) cut-and-fill structure are typical. Facies F was deposited by bedload streams that transported coarse, poorly sorted sand and gravel westward to the intertidal flats.

Arizona↗

USGS2023

Kinematic evolution of a large paraglacial landslide in the Barry Arm fjord of Alaska

Our warming climate is adversely affecting cryospheric landscapes via glacial retreat, permafrost degradation, and associated slope destabilization. In Prince William Sound, Alaska, the rapid retreat of Barry Glacier has destabilized the slopes flanking the glacier, resulting in numerous landslides. The largest of these landslides (∼500 Mm 3 in volume) is more than 2 km wide and has the potential to generate a tsunami that could affect nearby recreationists, marine traffic, infrastructure, natural and cultural resources, and the community of Whittier, located 60 km from the landslide. Here, we combine landslide structural and kinematic element mapping with data acquired from bi-yearly airborne lidar, multi-week satellite-based synthetic aperture radar (SAR), sub-hourly ground-based SAR, and seismic monitoring from 2020 to 2022 to characterize this landslide and examine its evolution. While some methods serve as a snapshot in time that is a culmination of events, others emphasize the ever-evolving nature of the landslide and associated hazards. Four major kinematic elements define the overall structure of the landslide, which vary in deformation type and rate, from creep (5 mm per day over several months) to episodic movement (2 m in 30 days) and landslide-wide to localized events. In some areas of the landslide, short-term deformation deviates from structures formed by cumulative movement, implying structural and kinematic evolution associated with glacier retreat. These insights are important for assessing landslide hazards and hazard evolution for large, slow-moving bedrock landslides in actively deglaciating environments.

Alaska↗

USGS1998

Nonlinear refraction and reflection travel time tomography

We develop a rapid nonlinear travel time tomography method that simultaneously inverts refraction and reflection travel times on a regular velocity grid. For travel time and ray path calculations, we apply a wave front method employing graph theory. The first-arrival refraction travel times are calculated on the basis of cell velocities, and the later refraction and reflection travel times are computed using both cell velocities and given interfaces. We solve a regularized nonlinear inverse problem. A Laplacian operator is applied to regularize the model parameters (cell slownesses and reflector geometry) so that the inverse problem is valid for a continuum. The travel times are also regularized such that we invert travel time curves rather than travel time points. A conjugate gradient method is applied to minimize the nonlinear objective function. After obtaining a solution, we perform nonlinear Monte Carlo inversions for uncertainty analysis and compute the posterior model covariance. In numerical experiments, we demonstrate that combining the first arrival refraction travel times with later reflection travel times can better reconstruct the velocity field as well as the reflector geometry. This combination is particularly important for modeling crustal structures where large velocity variations occur in the upper crust. We apply this approach to model the crustal structure of the California Borderland using ocean bottom seismometer and land data collected during the Los Angeles Region Seismic Experiment along two marine survey lines. Details of our image include a high-velocity zone under the Catalina Ridge, but a smooth gradient zone between. Catalina Ridge and San Clemente Ridge. The Moho depth is about 22 km with lateral variations. Copyright 1998 by the American Geophysical Union.

Journal of Geophysical Research B: Solid Earth↗

USGS1999

Total Petroleum Systems of the Northwest Shelf, Australia: The Dingo-Mungaroo/Barrow and the Locker-Mungaroo/Barrow

The Northwest Shelf Province (U.S.G.S. #3948) of Australia contains two important hydrocarbon source-rock intervals and numerous high quality reservoir intervals. These are grouped into two petroleum systems, Dingo-Mungaroo/Barrow and Locker-Mungaroo/Barrow, where the Triassic Mungaroo Formation and the Early Cretaceous Barrow Group serve as the major reservoir rocks for the Jurassic Dingo Claystone and Triassic Locker Shale source rocks. The primary source rock, Dingo Claystone, was deposited in restricted marine conditions during the Jurassic subsidence of a regional sub-basin trend. The secondary source rock, Locker Shale, was deposited in terrestrially-influenced, continental seaway conditions during the Early Triassic at the beginning of the breakup of Pangea. These systems share potential reservoir rocks of deep-water, proximal and distal deltaic, marginal marine, and alluvial origins, ranging in age from Late Triassic through Cretaceous. Interformational seals and the regional seal, Muderong Shale, along with structural and stratigraphic traps account for the many types of hydrocarbon accumulations in this province. In 1995, the Northwest Shelf produced 42% of the hydrocarbon liquids in Australia, and in 1996 surpassed the Australian Bass Straits production, with 275,000 barrels per day (bpd) average. This region is the major producing province of Australia. Known reserves as of 1995 are estimated at 11.6 billion of barrels of oil equivalent (BBOE)(Klett and others, 1997) . Although exploration has been conducted since 1955, many types of prospects have not been targeted and major reserves continue to be discovered.

Open-File Report↗

USGS1997

Fluvial-deltaic sedimentation and stratigraphy of the ferron sandstone

East-central Utah has world-class outcrops of dominantly fluvial-deltaic Turonian to Coniacian aged strata deposited in the Cretaceous foreland basin. The Ferron Sandstone Member of the Mancos Shale records the influences of both tidal and wave energy on fluvial-dominated deltas on the western margin of the Cretaceous western interior seaway. Revisions of the stratigraphy are proposed for the Ferron Sandstone. Facies representing a variety of environments of deposition are well exposed, including delta-front, strandline, marginal marine, and coastal-plain. Some of these facies are described in detail for use in petroleum reservoir characterization and include permeability structure.

Brigham Young University Geology Studies↗

USGS1994

Soda Lake-Painted Rock(!) Petroleum System in the Cuyama Basin, California, U.S.A.

The Cuyama basin, located in the central California Coast Ranges, was formed by extension during early Miocene time and was filled with a variety of nonmarine, marginal marine, and neritic to bathyal marine sediments. Low sulfur oil is produced primarily from the lower Miocene Painted Rock Sandstone Member of the Vaqueros Formation along a structural trend parallel to the Russell fault, which was active from 23 to 5 Ma. A major fold and thrust belt beginning about 3 Ma formed the Caliente and Sierra Madre ranges and partially obscures the Miocene extensional basin. Stable carbon isotope and biomarker data indicate that the lower Miocene Soda Lake Shale Member of the Vaqueros Formation is the predominant source rock for the oil in the Cuyama area. Burial and thermal history modeling shows that oil generation began in middle-late Miocene time and that oil migrated into existing traps. Younger traps that formed in the overthrust are barren of oil because migration occurred prior to the development of the fold and thrust belt or because subthrust oil was unable to migrate into the overthrust.

Book chapter↗

USGS2025

Insight 4. Climate change and biodiversity loss amplify each other

Key messages: • Climate change is impacting biodiversity from local to global scales, and growing evidence suggests that further loss of biodiversity can contribute to climate change, creating a destabilizing feedback. • Loss of plant diversity due to climate and land-use change can weaken ecosystem functioning, leading to a decrease in biomass accumulation and reduced carbon storage. • Animal biodiversity, both terrestrial and marine, plays a key role in regulating carbon storage through trophic chains and other plant-animal interactions that can alter vegetation structure and composition, affecting biomass accumulation and carbon sequestration. • Natural climate solution initiatives that integrate aspects of ecosystem integrity and species composition, rather than focusing solely on land cover area, can more effectively safeguard the carbon sink function.

Book chapter↗

USGS2024

Collision structures of the Prince William terrane and Chugach terrane docking along the Shumagin and Unimak convergent margins, Alaska, USA

Western Alaska’s convergent margins are composed of tectonostratigraphic terranes. On land, terrane assembly is recognized along boundaries or sutures between neighboring geologic elements with distinctly different origins. In marine areas where rock outcrops are covered by sediment, recognizing terrane sutures is problematic. A fault in seismic dip line 5 of the ALEUT project has been interpreted as a terrane suture. It is imaged intermittently down to the 30+-km-deep plate interface. Processing of ALEUT strike line 7 revealed the suture at ~18 km depths extending 300 km along the margin. Upper structures in line 5 are like the structures of adjacent seismic transects where imaging is only 8−10 km deep. They were previously not recognized as the upper reaches of terrane sutures and show structural details obscured at greater depths. The composite data are the basis for a simple tectonic model of terrane docking.

Alaska↗

USGS1983

Facies analysis of the lower cycles of the Mesaverde Group (Upper Cretaceous) in northwestern Colorado

The uppermost 180 m of the Mancos Shale and overlying 390 m of the Iles Formation of the Mesaverde Group in northwestern Colorado were deposited at the west margin of an epicontinental seaway that spanned North America 66-98 million years ago from the circumboreal seaway on the north to the Gulf of Mexico on the south. Sedimentation in the seaway was controlled by uplift in source areas to the west, subsidence in the basin, and eustatic sea level changes. Sedimentation rates were relatively high, averaging about 220m/million years; marine cycles of deposition occurred in northwestern Colorado that correspond to the Claggett, Judith River, and Bearpaw regressions of Montana. The upper Mancos shale and lower Iles Formation can be subdivided into ten facies based on five criteria: (1) Lithology, texture, and thickness relations (geometry); (2) sedimentary structures and contacts; (3) trace and body fossils; (4) paleocurrent data; and (5) adjoining facies (underlying, overlying, and laterally). Each facies has distinct attributes which characterize a specific depositional environment. Environments represented by facies include (A) offshore shoreface transition (prodelta); (B) shallow marine sand bars; (C) destructional delta front; (D) constructional delta front (sheet sands and mouth bars); (E) beach foreshore-shoreface deposits; (F) interdistributary marsh and swamp deposits and fluvial floodplain; (G) distributary channels; (H) crevasse splays; (J) fluvial streams; and (K) tidally influenced distributary channel. Facies analysis of outcrop data shows that transgressions and regressions occurred, some of which are related to major (eustatic) sea level changes and others that reflect only local causes. These events in northwestern Colorado are summarized in following chapters, and an attempt is made to show their relationship to broad regional patterns of sedimentation.

Open-File Report↗

USGS2015

Cenozoic stratigraphy and structure of the Chesapeake Bay region

The Salisbury embayment is a broad tectonic downwarp that is filled by generally seaward-thickening, wedge-shaped deposits of the central Atlantic Coastal Plain. Our two-day field trip will take us to the western side of this embayment from the Fall Zone in Washington, D.C., to some of the bluffs along Aquia Creek and the Potomac River in Virginia, and then to the Calvert Cliffs on the western shore of the Chesapeake Bay. We will see fluvial-deltaic Cretaceous deposits of the Potomac Formation. We will then focus on Cenozoic marine deposits. Transgressive and highstand deposits are stacked upon each other with unconformities separating them; rarely are regressive or lowstand deposits preserved. The Paleocene and Eocene shallow shelf deposits consist of glauconitic, silty sands that contain varying amounts of marine shells. The Miocene shallow shelf deposits consist of diatomaceous silts and silty and shelly sands. The lithology, thickness, dip, preservation, and distribution of the succession of coastal plain sediments that were deposited in our field-trip area are, to a great extent, structurally controlled. Surficial and subsurface mapping using numerous continuous cores, auger holes, water-well data, and seismic surveys has documented some folds and numerous high-angle reverse and normal faults that offset Cretaceous and Cenozoic deposits. Many of these structures are rooted in early Mesozoic and/or Paleozoic NE-trending regional tectonic fault systems that underlie the Atlantic Coastal Plain. On Day 1, we will focus on two fault systems (stops 1–2; Stafford fault system and the Skinkers Neck–Brandywine fault system and their constituent fault zones and faults). We will then see (stops 3–5) a few of the remaining exposures of largely unlithified marine Paleocene and Eocene strata along the Virginia side of the Potomac River including the Paleocene-Eocene Thermal Maximum boundary clay. These exposures are capped by fluvial-estuarine Pleistocene terrace deposits. On Day 2, we will see (stops 6–9) the classic Miocene section along the ~25 miles (~40 km) of Calvert Cliffs in Maryland, including a possible fault and structural warping. Cores from nearby test holes will also be shown to supplement outcrops.

Chesapeake Bay↗

USGS1993

Neogene folding and faulting in southern Monterey Bay, Central California, USA

The goal of this study was to determine the Neogene structural history of southern Monterey Bay by mapping and correlating the shallow tectonic structures with previously identified deeper occurring structures. Side scan sonographs and Uniboom seismic reflection profiles collected in the region suggest that deformation associated with both compressional and transcurrent movement is occurring. Strike-slip movement between the North American and Pacific plates started as subduction ceased 21 Ma, creating the San Andreas fault system. Clockwise rotation of the Pacific plate occurred between 3.4 and 3.9 Ma causing orthogonal convergence between the two plates. This plate rotation is responsible for compressional Neogene structures along the central California coast. Structures exhibit transpressional tectonic characteristics such as thrust faulting, reverse faulting and asymmetrical folding. Folding and faulting are confined to middle Miocene and younger strata. Shallow Mesozoic granitic basement rocks either crop out or lie near the surface in most of the region and form a possible décollement along which the Miocene Monterey Formation has decoupled and been folded. Over 50% of the shallow faults strike normal (NE-SW) to the previously identified faults. Wrench fault tectonics complicated by compression, gradual uplift of the basement rocks, and a change in plate convergence direction are responsible for the observed structures in southern Monterey Bay.

Marine Geology↗

USGS1999

Harlequin Duck recovery from the Exxon Valdez oil spill: A population genetics perspective

Concerns about Harlequin Duck ( Histrionicus histrionicus ) population recovery following the Exxon Valdez oil spill led biologists to ask whether birds located in different molting and wintering areas belong to genetically distinct and, thus, demographically independent populations. Owing to the lack of direct observations of movements among marine areas, three classes of genetic markers that differed in mode of inheritance were used to evaluate the degree of genetic differentiation among wintering areas within Prince William Sound (PWS) and the Alaska Peninsula and Kodiak Archipelago (APKA). We could not reject the null hypothesis that the wintering aggregations within each region are composed of a single genetically panmictic population. Differences in genotype frequencies among wintering locations within PWS and APKA were low and nonsignificant for all three classes of markers. Furthermore, we saw no evidence for deviations in Hardy-Weinberg equilibrium or gametic disequilibrium between loci within a winter collection site as would be expected if these locales were composed of individuals from reproductively isolated (and genetically distinct) breeding locales. Finally, no evidence for significant structuring was noted between PWS and APKA. Lack of spatial genetic structuring could be due to the cumulative effects of low levels of gene flow over long time periods, low levels of gene flow by immature birds moving between marine habitats, or to episodic dispersal caused by habitat alteration (e.g. volcanic eruptions). Harlequin Ducks are likely to recolonize or enhance populations in areas recovering from environmental damage via emigration of birds from non-affected areas. Demographic studies suggest, however, that levels of movements are low, and that population recovery by emigration is a long-term process.

The Auk↗

USGS2012

Changes in size and trends of North American sea duck populations associated with North Pacific oceanic regime shifts

Broad-scale multi-species declines in populations of North American sea ducks for unknown reasons is cause for management concern. Oceanic regime shifts have been associated with rapid changes in ecosystem structure of the North Pacific and Bering Sea. However, relatively little is known about potential effects of these changes in oceanic conditions on marine bird populations at broad scales. I examined changes in North American breeding populations of sea ducks from 1957 to 2011 in relation to potential oceanic regime shifts in the North Pacific in 1977, 1989, and 1998. There was strong support for population-level effects of regime shifts in 1977 and 1989, but little support for an effect of the 1998 shift. The continental-level effects of these regime shifts differed across species groups and time. Based on patterns of sea duck population dynamics associated with regime shifts, it is unclear if the mechanism of change relates to survival or reproduction. Results of this analysis support the hypothesis that population size and trends of North American sea ducks are strongly influenced by oceanic conditions. The perceived population declines appear to have halted >20 years ago, and populations have been relatively stable or increasing since that time. Given these results, we should reasonably expect dramatic changes in sea duck population status and trends with future oceanic regime shifts.

Marine Biology↗

USGS2020

Along-strike segmentation in the northern Caribbean plate boundary zone (Hispaniola sector): Tectonic implications

The North American (NOAM) plate converges with the Caribbean (CARIB) plate at a rate of 20.0 ± 0.4 mm/yr. towards 254 ± 1°. Plate convergence is highly oblique (20–10°), resulting in a complex crustal boundary with along-strike segmentation, strain partitioning and microplate tectonics. We study the oblique convergence of the NOAM and CARIB plates between southeastern Cuba to northern Puerto Rico using new swath multibeam bathymetry data and 2D multi-channel seismic profiles. The combined interpretation of marine geophysical data with the seismicity and geodetic data from public databases allow us to perform a regional scale analysis of the shallower structure, the seismotectonics and the slab geometry along the plate boundary. Due to differential rollback between the NOAM oceanic crust north of Puerto Rico and the relative thicker Bahamas Carbonate Province crust north of Hispaniola a slab tear is created at 68.5°W. The northern margin of Puerto Rico records the oblique high-dip subduction and rollback of the NOAM plate below the island arc. Those processes have resulted in a forearc transpressive tectonics (without strain partitioning), controlled by the Septentrional-Oriente Fault Zone (SOFZ) and the Bunce Fault Zone (BFZ). Meanwhile, in the northern margin of Hispaniola, the collision of the Bahamas Carbonate Province results in high plate coupling with strain partitioning: SOFZ and Northern Hispaniola Deformed Belt (NHDB). In the northern Haitian margin, compression is still relevant since seismicity is mostly associated with the deformation front, whereas strike slip earthquakes are hardly anecdotal. Although in Hispaniola intermediate-depth seismicity should disappear, diffuse intermediate-depth hypocenter remains evidencing the presence of remnant NOAM subducted slab below central and western Hispaniola. Results of this study improve our understanding of the active tectonics in the NE Caribbean that it is the base for future assessment studies on seismic and tsunamigenic hazard.

Caribbean Plate↗

USGS1984

Geologic evolution, sedimentation, and paleoenvironments of the Angola Basin and adjacent Walvis Ridge: Synthesis of results of Deep Sea Drilling Project Leg 75

The section recovered at Site 530 (Holes 53OA and 530B) consists of eight sedimentary units and one basalt unit. The composition of the basalt recovered in Hole 53OA is distinct from typical mid-ocean ridge basalts (MORBs) but is similar to that of Hawaiian tholeiites and basalt from the central part of Walvis Ridge. Throughout most of its history, the southern Angola Basin received large volumes of redeposited material in the form of turbidites and, most recently, debris-flow deposits. Most of this material was derived from Walvis Ridge to the south, but thickness trends of acoustic units suggest that some of the sediment was derived from the African continental margin to the east. The basal sedimentary unit (Albian to Santonian) at Site 530 contains 262 beds of black shale that are interbedded with green and red claystone. Black shale makes up less than 10% of the total section, but in two cores of early Turonian age, black shale beds compose about 50% of the section. The black shales contain up to 19% organic carbon (average of about 5%) that is mainly of autochthonous marine origin but with significant contributions from terrigenous organic matter. The origin of these more- and less-reduced interbedded lithologies with varying amounts and types of organic matter, and variable amounts of pelagic, hemipelagic, and turbiditic sediment is complex and cannot be explained by any one simple process. Many factors affecting the concentration of dissolved oxygen in the bottom waters of the Angola Basin varied throughout the middle Cretaceous to produce bottom-water conditions that fluctuated between mildly oxic and oxygen-deficient, but most of the time bottom-waters and sediment-interstitial waters were sufficiently oxic to permit the accumulation of red oxidized sediment. A relatively complete sedimentary record of the Cretaceous/Tertiary boundary was recovered within a sequence of mudstone and marlstone turbidites in Hole 530A. There is a significant increase in the concentration of iridium above background levels at the boundary. High concentrations of many other elements also occur within the same stratigraphic interval as the iridium anomaly. Furthermore, there is a marked decrease in CaCO3 in the Tertiary strata above the iridium anomaly which suggests that the production of shallow-water carbonate also may have been affected by whatever caused elevated concentrations of iridium and other elements. These observations are consistent with the asteroid-impact theory proposed to explain the worldwide occurrence of an iridium anomaly at the Cretaceous/Tertiary boundary. The Cenozoic history of the Angola Basin was controlled mainly by (1) restriction of bottom-water flow from the south by Walvis Ridge; (2) development of glaciation on Antarctica; (3) opening of circulation passages in the southern oceans; (4) rapid turnover of cold, nutrient-rich waters that resulted in high productivity of diatoms; (5) influx of terrigenous sediment mainly by turbidity currents; and (6) production and preservation of carbonate sediment. The most distinctive Cenozoic event recorded in the section at Site 530 is the beginning of extensive glaciation on Anarctica and concomitant initiation of modern thermohaline bottom-water circulation that is manifested as a middle Eocene to middle Oligocene unconformity or compressed section accompanied by a drastic decrease in accumulation of CaCO3. Diatom abundances in HPC cores from Walvis Ridge (Site 532) and Angola Basin (Hole 53OB) indicate that Benguela upwelling in these areas began in the late Miocene, reached a peak in the late Pliocene to early Pleistocene, and declined thereafter. Short-term variations in sediment composition at Site 532 are manifested as cyclic variations in concentrations of clay, CaCO3, and organic carbon with average periodicities of about 30-60 k.y. The main variability that produced the cycles probably was the influx of terrigenous clastic material which diluted the CaCO3. The sediment at Site 532 also contains several percent organic carbon that is dominantly of marine origin, but with significant terrigenous components. Data from multichannel seismic, gravity, and magnetic surveys were used to define the regional stratigraphic and structural evolution of Walvis Ridge and adjacent Cape and Angola basins. Six structural provinces are recognized, four on Walvis Ridge and two additional provinces that correspond to the Cape and Angola basins. The two eastern structural provinces on Walvis Ridge are underlain by continental crust. The two western structural provinces are underlain by oceanic basement. Two main directions of faults are evident in seismic profiles, one trending N 10° and one trending N 60°. The N 60° trend corresponds to the general orientation of the northern and southern flanks of Walvis Ridge as well as to the dominant direction of fracture zones. During the first phase of separation of Africa from South America (ca. 120-130 m.y. ago), a voluminous mass of volcanics was emplaced simultaneous with the emplacement of basalt in the Parana Basin of Brazil and the Kaokoveld Region of South Africa. This period of volcanism also formed the series of seaward-dipping internal basement reflectors that are characteristic of the two structural provinces of Walvis Ridge. A system of fault blocks developed in the brittle upper part of the newly formed crust. During the second phase of rifting, which ended before late Aptian, more tilted fault blocks were created in the upper brittle stratified continental crust. Magnetic lineations in basement rocks in the Angola and Cape basins in the vicinity of Walvis Ridge are not distinct but suggest that oceanic crust began to be emplaced between 120 and 112 m.y. ago (Barremian to early Aptian). At least part of the oceanic crust of the central plateau of eastern Walvis Ridge (structural province 3) may have been emplaced before any oceanic crust formed in the adjacent basins. A ridge jump occurred during the late Aptian to early Albian in the southern part of the Angola Basin which translated the previously formed oceanic crust and its overlying evaporite deposits on the South American side. Several ridge jumps occurred on both sides of Walvis Ridge during the Late Cretaceous and early Tertiary to produce a 500-km-long segment of mid-ocean ridge.

Initial Reports of the D.S.D.P.↗

USGS1987

Maps showing distribution of the Middle Cretaceous unconformity in the eastern Gulf of Mexico

Several theories on the origin of the Gulf of Mexico basin have been introduced by various researchers (Beloussov, 1970; Freeland and Dietz, 1971; Malfait and Dinkelman, 1972; Wood and Walper, 1974; Pilger, 1978; Buffler and others, 1980; Dickinson and Coney, 1980; Gose and others, 1980; Schmidt-Effing, 1980; Walper, 1980; Schlager and others, 1984). Although no final agreement has been reached, one prominent geologic feature is generally recognized. The early evolution of the basin ended with a major middle Cretaceous event resulting in a Gulf-wide unconformity referred to as the middle Cretaceous unconformity (MCU). This event represents a major shift from Early Cretaceous shallow-water bank sedimentation to Late Cretaceous deeper water carbonates (Worzel and others, 1973; Mitchum, 1978). Seismic data collected by the U.S. Geological Survey and the University of Texas Marine Science Institute, Galveston Geophysics Laboratory (UTMSI-GGL) were used to map the MCU and its relationship to the deep stratigraphy and structure of the eastern Gulf basin east of long 90° W. In addition, data from the Deep Sea Drilling Project (DSDP) in the southeastern Gulf and along the Campeche Escarpment and dredge samples collected by Schlager and others (1984) from the Florida Escarpment provide an age for the MCU (Cenomanian, 97 m. y. ) and a detailed lithological record. This report emphasizes the salt diapirs, pillows, and ridges in the northeastern Gulf of Mexico because of the profound effect these geologic structures have on the MCU. Salt locations are shown on the isopach of post-MCU sediments (fig. 1). A second map shows pre-middle Cretaceous outcrops terminated by the MCU along the Florida Escarpment, the southeastern Gulf, and the Campeche Escarpment (fig. 2).

Miscellaneous Field Studies Map↗

USGS1995

Preliminary Geologic Map of the Thousand Oaks 7.5' Quadrangle, Southern California: A Digital Database

Thousand Oaks is located in Arroyo Conejo, a region spanning both southeastern Ventura County and extreme northwest Los Angeles County in southern California. It was discovered in 1542 by Spanish explorer Juan Rodriquez Cabrillo and eventually became part of the Spanish Rancho El Conejo land grant (conejo means 'rabbit' in Spanish, of which there are many in the area). It is located in the Santa Monica Mountains in the northwestern part of the greater Los Angeles area. The area is bordered by the San Fernando Valley and the city of Los Angeles to the east, Simi Hills to the north, Las Posas Hills and the Santa Rosa Valley to the northwest, Conejo Mountain (also known as Conejo Hills) and Oxnard Plain to the west, and the Santa Monica Mountains and Malibu to the southwest. The geology of the surrounding Santa Monica Mountains is dominated by a sequence of Tertiary sedimentary and volcanic rocks. These include the Tertiary Modelo Formation and the upper part of the Topanga Formation, other minor Tertiary rocks, and Miocene volcanic and intrusive rocks of the Conejo Formation. The basement units within the Santa Monica Mountains are a series of Jurassic and Cretaceous sedimentary rocks. The volcanic rocks of the Conejo Formation underlies much of the surrounding watersheds. The younger Tertiary sedimentary Modelo and Upper Topanga Formations flank the Conejo to the north and south. On the north slope of the Santa Monica Mountains where the Arroyo Conejo and Thousand Oaks are located, the Tertiary formations are gently folded. The south flank of the Santa Monica Mountains is structurally dominated by the Malibu Coast Fault that runs along the foot of the mountains. This fault, and associated structures, creates a complex geologic setting on the south flank of the Santa Monica Mountains. The active nature of the Malibu Coast fault and associated structures accounts for the steep and rugged coastal topography. The most widely exposed rock units in the area are the Plio-Pleistocene marine and nonmarine Pico and Saugus formations, which crop out on the southern flank of South Mountain-Oak Ridge and on the Las Posas uplands and Las Posas Hills. Locally, the Pico Formation consists of marine siltstone and silty shale with minor sandstone and pebbly sandstone. The Saugus Formation overlies and interfingers with the Pico Formation and is composed of interbedded shallow-marine to brackish water sandstone, siltstone, pebble-cobble conglomerate, and coquina beds that grade laterally and vertically into non-marine sandstone, siltstone, and conglomerate. A local member of the Saugus Formation is exposed in the southeast corner of the map area. It is predominantly a volcanic breccia conglomerate that resembles the Conejo Volcanics breccia, but is believed to represent remnants of landslide debris shed from the Conejo Formation into a local trough during Saugus time. Eroded from, and overlying, these bedrock formations are a series of recent alluvial units. These alluvial units include Quaternary alluvium comprised of alluvium, stream deposits, alluvial fan and floodplain deposits, beach deposits, dissected older alluvial deposits. Also present are Quaternary landslides and colluvium composed of landslide deposits and colluvium deposits. The colluvium represents relatively thick continuous deposits of soil and rock fragments that are common on the steep slopes of the coastal canyons, and generally feed the many landslides, soil slips, and debris flows.

Open-File Report↗