Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Interpretation Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources
USGS2024

Evolution of a lake margin recorded in the Sutton Island member of the Murray formation, Gale crater, Mars

This study uses data from the Mars Science Laboratory Curiosity rover to document the facies of the Sutton Island member of the Murray formation, interpret paleoenvironments, and establish key stratigraphic transitions at Gale crater. Two facies associations were identified: Facies Association 1 (FA1) and Facies Association 2 (FA2). Individual facies in FA1 include planar-laminated mudstone with minor intervals of planar sandstone, ripple cross-laminated sandstone, cross-stratified sandstone, and alternating laminated sandstone and mudstone. Meter-thick packages of planar-laminated mudstone in FA1 are interpreted to represent deposition in low-energy ponded environments along the lake margin. Straight- and curve-crested ripple cross-laminated facies are interpreted to represent current-influenced deposition. Cross-stratified sandstone facies consist of dm-thick sets that represent deposition in distal channels. Intercalated mm-scale mudstone and sandstone laminae represent waning flow conditions and possible channel abandonment. Facies in FA1 collectively represent deposition in a distal delta plain. FA2 is comprised of planar-laminated mudstone with minor sandstone and is interpreted to represent deposition in a lacustrine-basin setting by suspension settling linked to density flows. FA1 transitions upward into FA2, defining a rapid transgression substantial enough to facilitate the deposition of distal lake facies above delta plain facies. The abrupt transition from FA2 back to FA1 deltaic deposits is suggestive of forced regression. Facies in FA1 and FA2 are consistent with the prevalence of aqueous environments recorded in other Murray formation members and extend our understanding of the dynamic sedimentary processes that characterized ancient lacustrine systems at Gale crater.

Journal of Geophysical Research - Planets↗
USGS2002

Plotting equation for Gaussian percentiles and a spreadsheet program for generating probability plots

Two-dimensional plotting tools can be of invaluable assistance in analytical scientific pursuits, and have been widely used in the analysis and interpretation of sedimentologic data. We consider, in this work, the use of arithmetic probability paper (APP). Most statistical computer applications do not allow for the generation of APP plots, because of apparent intractable nonlinearity of the percentile (or probability) axis of the plot. We have solved this problem by identifying an equation(s) for determining plotting positions of Gaussian percentiles (or probabilities), so that APP plots can easily be computer generated. An EXCEL example is presented, and a programmed, simple-to-use EXCEL application template is hereby made publicly available, whereby a complete granulometric analysis including data listing, moment measure calculations, and frequency and cumulative APP plots, is automatically produced.

Journal of Sedimentary Research↗
USGS2008

Paired charcoal and tree-ring records of high-frequency Holocene fire from two New Mexico bog sites

Two primary methods for reconstructing paleofire occurrence include dendrochronological dating of fire scars and stand ages from live or dead trees (extending back centuries into the past) and sedimentary records of charcoal particles from lakes and bogs, providing perspectives on fire history that can extend back for many thousands of years. Studies using both proxies have become more common in regions where lakes are present and fire frequencies are low, but are rare where high-frequency surface fires dominate and sedimentary deposits are primarily bogs and wetlands. Here we investigate sedimentary and fire-scar records of fire in two small watersheds in northern New Mexico, in settings recently characterised by relatively high-frequency fire where bogs and wetlands (Chihuahuen??os Bog and Alamo Bog) are more common than lakes. Our research demonstrates that: (1) essential features of the sedimentary charcoal record can be reproduced between multiple cores within a bog deposit; (2) evidence from both fire-scarred trees and charcoal deposits documents an anomalous lack of fire since ???1900, compared with the remainder of the Holocene; (3) sedimentary charcoal records probably underestimate the recurrence of fire events at these high-frequency fire sites; and (4) the sedimentary records from these bogs are complicated by factors such as burning and oxidation of these organic deposits, diversity of vegetation patterns within watersheds, and potential bioturbation by ungulates. We consider a suite of particular challenges in developing and interpreting fire histories from bog and wetland settings in the Southwest. The identification of these issues and constraints with interpretation of sedimentary charcoal fire records does not diminish their essential utility in assessing millennial-scale patterns of fire activity in this dry part of North America. ?? IAWF 2008.

International Journal of Wildland Fire↗
USGS2006

The changing shapes of active volcanoes: History, evolution, and future challenges for volcano geodesy

At the very heart of volcanology lies the search for the 'plumbing systems' that form the inner workings of Earth’s active volcanoes. By their very nature, however, the magmatic reservoirs and conduits that underlie these active volcanic systems are elusive; mostly they are observable only through circumstantial evidence, using indirect, and often ambiguous, surficial measurements. Of course, we can infer much about these systems from geologic investigation of materials brought to the surface by eruptions and of the exposed roots of ancient volcanoes. But how can we study the magmatic processes that are occurring beneath Earth’s active volcanoes? What are the geometry, scale, physical, and chemical characteristics of magma reservoirs? Can we infer the dynamics of magma transport? Can we use this information to better forecast the future behavior of volcanoes? These questions comprise some of the most fundamental, recurring themes of modern research in volcanology. The field of volcano geodesy is uniquely situated to provide critical observational constraints on these problems. For the past decade, armed with a new array of technological innovations, equipped with powerful computers, and prepared with new analytical tools, volcano geodesists have been poised to make significant advances in our fundamental understanding of the behavior of active volcanic systems. The purpose of this volume is to highlight some of these recent advances, particularly in the collection and interpretation of geodetic data from actively deforming volcanoes. The 18 papers that follow report on new geodetic data that offer valuable insights into eruptive activity and magma transport; they present new models and modeling strategies that have the potential to greatly increase understanding of magmatic, hydrothermal, and volcano-tectonic processes; and they describe innovative techniques for collecting geodetic measurements from remote, poorly accessible, or hazardous volcanoes. To provide a proper context for these studies, we offer a short review of the evolution of volcano geodesy, as well as a case study that highlights recent advances in the field by comparing the geodetic response to recent eruptive episodes at Mount St. Helens. Finally, we point out a few areas that continue to challenge the volcano geodesy community, some of which are addressed by the papers that follow and which undoubtedly will be the focus of future research for years to come.

Journal of Volcanology and Geothermal Research↗
USGS2003

Seabird tissue archival and monitoring project: Egg collections and analytical results 1999-2002

In 1998, the U.S. Geological Survey Biological Resources Division (USGS-BRD), the U.S. Fish and Wildlife Service (USFWS) Alaska Maritime National Wildlife Refuge (AMNWR), and the National Institute of Standards and Technology (NIST) began the Seabird Tissue Archival and Monitoring Project (STAMP) to collect and cryogenically bank tissues from seabirds in Alaska for future retrospective analysis of anthropogenic contaminants. The approach of STAMP was similar to that of the Alaska Marine Mammal Tissue Archival Project (AMMTAP). AMMTAP was started in 1987 by NIST and the National Oceanic and Atmospheric Administration (NOAA) as part of the Outer Continental Shelf Environmental Assessment Program sponsored by the Minerals Management Service. Presently sponsored by the USGS-BRD, AMMTAP continues its work as part of a larger national program, the Marine Mammal Health and Stranding Response Program. AMMTAP developed carefully designed sampling and specimen banking protocols. Since 1987, AMMTAP has collected tissues from marine mammals taken in Alaska Native subsistence hunts and has cryogenically banked these tissues at the NIST National Biomonitoring Specimen Bank (NBSB). Through its own analytical work and working in partnership with other researchers both within and outside Alaska, AMMTAP has helped to develop a substantial database on contaminants in Alaska marine mammals. In contrast, data and information is limited on contaminants in Alaska seabirds, which are similar to marine mammals in that they feed near the top of the food chain and have the potential for accumulating anthropogenic contaminants. During its early planning stages, STAMP managers identified the seabird egg as the first tissue of choice for study by the project. There is a relatively long history of using bird eggs for environmental monitoring and for investigating the health status of bird populations. Since 1998, protocols for collecting and processing eggs, and cryogenically banking egg samples have been developed by STAMP (see York et al. 2001). Eggs are being collected on an annual basis for several species at nesting colonies throughout Alaska. Aliquots of these egg samples are being analyzed on a regular basis for persistent organic pollutants and mercury. Results of this work have been published in scientific journals (Christopher et al. 2002) and in conference proceedings (Kucklick et al. 2002; Vander Pol et al. 2002a, 2002b). The intent of this report is to provide an up-to-date description of STAMP. The report contains the most recent egg collection inventory, analytical data, preliminary interpretations based on these data, and a discussion of possible future directions of the project.

Report↗
USGS2000

Morphology and acoustic character of the Antarctic Wilkes Land turbidite systems: Ice-sheet-sourced versus river-sourced fans

The Wilkes Land continental slope contains an intricate network of submarine canyons that on the continental rise develop into a series of channel and overbank deposits of turbidite systems. We can define upper-fan, middle-fan, and lower-fan provinces. The Wilkes Land upper fans are characterized by large channels with relief up to 900 m, distances between levee crests up to 18 km, and channel-floor widths up to 6 km. Middle-fan channels also have high relief (∼300 m), and locally, interchannel areas exhibit mounded contourite-style deposits with high relief (up to 490 m). Within middle-fan sediment mounds there are acoustic facies of channel-overbank deposits from turbidity currents, and of sediment waves from contour-current sedimentation. The lower rise is characterized by small, shallow channels (50-75 m relief) and by interchannel areas of low relief, both characteristic of a lower-fan environment. The Wilkes Land turbidite systems show the following significant morphological differences compared to most river-sourced fans: (1) multiple large tributary channels across the upper and middle fan, (2) channel relief several times greater (900 m) than typical relief (100-200 m) for channels on fans less than 300 km in diameter, and (3) steep middle-fan and lower-fan gradients. We interpret the differences in channel network patterns, channel size, and middle-fan and lower-fan gradients between the Wilkes Land fans and other fans to result from the continental ice sheet feeding glacial ice streams that reached the outer continental shelf at times of glacial maxima. The Wilkes Land canyon-channel network patterns are comparable with the high-latitude Laurentian Fan and Labrador Sea channels. The Laurentian Fan also has large upper-fan channels with larger relief (800 m) than typical relief (200-300 m) expected for fans that are 600 km in diameter. Both the Labrador Sea and Laurentian Fan are fed by continental ice sheets at the shelf edge.

Journal of Sedimentary Research↗
USGS2011

Unmarked: An R package for fitting hierarchical models of wildlife occurrence and abundance

Ecological research uses data collection techniques that are prone to substantial and unique types of measurement error to address scientific questions about species abundance and distribution. These data collection schemes include a number of survey methods in which unmarked individuals are counted, or determined to be present, at spatially- referenced sites. Examples include site occupancy sampling, repeated counts, distance sampling, removal sampling, and double observer sampling. To appropriately analyze these data, hierarchical models have been developed to separately model explanatory variables of both a latent abundance or occurrence process and a conditional detection process. Because these models have a straightforward interpretation paralleling mechanisms under which the data arose, they have recently gained immense popularity. The common hierarchical structure of these models is well-suited for a unified modeling interface. The R package unmarked provides such a unified modeling framework, including tools for data exploration, model fitting, model criticism, post-hoc analysis, and model comparison.

Journal of Statistical Software↗
USGS1974

Generalized geology and structure of the Winkelman 15-minute quadrangle and vicinity, Pinal and Gila Counties, Arizona

A. northwest-trending belt of steeply east-dipping Precambrian and Paleozoic sedimentary rocks extends across the Winkelman 15-minute quadrangle and separates areas of contrasting structures. To the southwest for 60 mi is an expanse of Precambrian basement, largely granite; to the northeast the Precambrian and Paleozoic sedimentary rocks are gently tilted and intricately faulted. The structure within the Winkelman 15-minute quadrangle is interpreted as a monocline separated into en echelon segments by strike-slip and normal faults. Other monoclines lie-to the north and northwest. Most of the tilting that formed the monoclines occurred after deposition of the early(?) Miocene San Manuel Formation. Structural features that repeat the Precambrian and Paleozoic sedimentary rocks within the area and that resemble high-angle faults are believed to have formed as low-angle thrusts, tilted to their present nearly vertical position during development of the monoclines. Structural features that are younger than the monoclines include low-angle gravity slide surfaces which are older than the high-angle normal faults that formed the basin-and-range topography on which the Pliocene sediments were deposited.

Arizona↗
USGS2013

Using simulated maps to interpret the geochemistry, formation and quality of the Blue Gem Coal Bed, Kentucky, USA

This study presents geostatistical simulations of coal-quality parameters, major oxides and trace metals for an area covering roughly 812 km 2 of the Blue Gem coal bed in southeastern Kentucky, USA. The Blue Gem, characterized by low ash yield and low sulfur content, is an important economic resource. Past studies have characterized the Blue Gem's geochemistry, palynology and petrography and inferred a depositional setting of a planar peat deposit that transitioned to slightly domed later in its development. These studies have focused primarily on vertical geochemical trends within the coal bed. Simulated maps of chemical elements derived from 45 measured sample locations across the study area provide an opportunity to observe changes in the horizontal direction within the coal bed. As the Blue Gem coal bed shows significant vertical chemical trends, care was taken in this study to try to select samples from a single, middle portion of the coal. By revealing spatial distribution patterns of elements across the middle of the bed, associations between different components of the coal can be seen. The maps therefore help to provide a picture of the coal-forming peat bog at an instant in geologic time and allow interpretation of a depositional setting in the horizontal direction. Results from this middle portion of the coal suggest an association of SiO 2 with both K 2 O and TiO 2 in different parts of the study area. Further, a pocket in the southeast of the study area shows elevated concentrations of elements attributable to observed carbonate-phase minerals (MgO, CaO, Ba and Sr) as well as elements commonly associated with sulfide-phase minerals (Cu, Mo and Ni). Areas of relatively high ash yield are observed in the north and south of the mapped area, in contrast to the low ash yields seen towards the east. Additionally, we present joint probability maps where multiple coal-quality parameters are plotted simultaneously on one figure. This application allows researchers to investigate associations of more than two components in a straight-forward manner useful in guiding resource exploration.

Kentucky↗
USGS2012

Strain accumulation across the Denali fault in the Delta River canyon, Alaska

Deformation along the Denali fault in the Delta River canyon was determined from geodetic surveys in 1941/1942, 1970, 1975, and 1979. The data were best for the 1975–1979 interval; in that period the average strain accumulation was essentially pure right lateral shear at a rate of 0.6 ± 0.1 μrad/a (a is years) (engineering shear) across a vertical plane striking N87°E. The plane of maximum shear is rotated about 30° counterclockwise from the local strike of the Denali fault but closely coincides with the strike of a major linear segment of the fault that begins 50 km farther west. The deformation between 1941/1942 and 1970 is consistent with a similar rate of strain accumulation if one removes the coseismic strain step contributed by the 1964 Alaska earthquake. The 1970–1975 deformation is poorly defined owing to uncertainties in the 1970 survey, but the strain accumulation during that period is certainly much less than during the 1975–1979 interval. The 1975–1979 strain accumulation is interpreted by means of a dislocation model which suggests that the Denali fault in the vicinity of the Delta River Canyon behaves as a leaky transform fault (i.e., a source of spreading as well as lateral slip). The block south of the Denali fault appears to be moving westward (parallel to the strike of the Denali fault west of the 147th meridian) at the rate of about 20 mm/a relative to the North American plate. Because the linear segment of the Denali fault east of the 147th meridian (along which the geodetic network is located) strikes N63°W, accommodation of the westward motion of the southern block requires some spreading within the fault zone as well as right lateral slip on the fault.

Journal of Geophysical Research Solid Earth↗
USGS2022

Synthetic evaluation of infrasonic multipole waveform inversion

Acoustic source inversions estimate the mass flow rate of volcanic explosions or yield of chemical explosions and provide insight into potential source directionality. However, the limitations of applying these methods to complex sources and their ability to resolve a stable solution have not been investigated in detail. We perform synthetic infrasound waveform inversions that use 3-D Green’s functions for a variety of idealized and realistic deployment scenarios using both a flat plane and Yasur volcano, Vanuatu as examples. We investigate the ability of various scenarios to retrieve the input source functions and relative amplitudes for monopole and multipole (monopole and dipole) inversions. Infrasound waveform inversions appear to be a robust method to quantify mass flow rates from simple sources (monopole) using deployments of infrasound sensors placed around a source, but care should be taken when analyzing and interpreting results from more complex acoustic sources (multipole) that have significant directional components. In the examples we consider the solution is stable for monopole inversions with a signal-to-noise ratio greater than five and the dipole component is small. For most scenarios investigated, the vertical dipole component of the multipole explosion source is poorly constrained and can impact the ability to recover the other source term components. Because multipole inversions are ill-posed for many deployments, a low residual does not necessarily mean the proper source vector has been recovered. Synthetic studies can help investigate the limitations and place bounds on information that may be missing using monopole and multipole inversions for potentially directional sources.

Journal of Geophysical Research-Solid Earth↗
USGS2012

Crustal structure and composition of the southern Foothills Metamorphic Belt, Sierra Nevada, California, from seismic data

The Foothills Metamorphic Belt is an accreted terrane consisting of Paleozoic and Mesozoic metamorphic rocks that separates the Great Valley from the Sierra Nevada batholith in northern and central California. Until recently, the only available geophysical data for this area were reconnaissance refraction surveys, and gravity and magnetic data. New insights into the structure of the deep crust are provided by the interpretation of a seismic reflection profile (CC‐2), acquired in 1984 by the U.S. Geological Survey at the southern end of the Foothills Metamorphic Belt. Our interpretation is constrained by a new seismic velocity model derived from coincident microearthquake data. Earthquake hypocenters that occur at unusually great depths of 12 to 30 km make the data set particularly useful for obtaining deep crustal velocity information. The velocity model shows velocities of 5.2 to 6.3 km s −1 for the upper 12 km of the crust, and 6.7 to 6.8 km s −1 from 12 km to an estimated Moho at 32 km. The upper crustal velocities correspond to metamorphic rocks and serpentinites of the Foothills Metamorphic Belt as well as to diorites and granodiorites of the Sierra Nevada batholith, while the lower crustal velocities are interpreted to represent intermediate to mafic granulites. The majority of the earthquake hypocenters as well as a 6.7 km s −1 layer in the velocity model corresponds in depth to thick zones of west dipping midcrustal reflections that may represent major shear zones formed during the late Jurassic Nevadan orogeny or synbatholithic ductile shear zones that accommodated crustal extension associated with batholith intrusion. These reflections are truncated updip by an inferred subvertical contact that coincides with the western edge of the Sierra Nevada batholith and the southward trace of the Bear Mountains fault zone. The updip truncation of midcrustal shear zones and high lower crustal velocities indicate that strike‐slip faulting and magmatic underplating can be important processes during the docking and welding of an accreted terrane.

California↗
USGS2012

The Redskin granite: Evidence for thermogravitational diffusion in a Precambrian granite batholith

The 1000-Ma-old composite Pikes Peak batholith consists largely of medium- to coarse-grained biotite granite but is intruded by several smaller granite plutons. Two of these, the Tarryall Mountains batholith and the Redskin Granite (Hawley, 1969; Hawley and Wobus, 1977), are here interpreted as cupolas atop the main mass of the Pikes Peak batholith. Chemical analysis for 38 elements in rocks from the Redskin Granite, the Tarryall Mountains batholith, and the biotite granite of the Pikes Peak batholith support the contention that the compositions of the smaller plutons are unlikely to have evolved from that of the main mass of the batholith by crystal fractionation. It is believed that these compositions arose through liquid-state fractionation processes, possibly the convection-aided thermogravitational model of Shaw et al. (1976). It is important to recognize that the chemical signature of this fractionation process can be discerned in holocrystalline rocks as well as in their glassy equivalents because the process may be instrumental in the formation of some kinds of lithophile ore deposits.

Journal of Geophysical Research Solid Earth↗
USGS2000

The enigma of the Arthur's Pass, New Zealand, earthquake: 1. Reconciling a variety of data for an unusual earthquake sequence

The 1994 Arthur's Pass earthquake ( M W 6.7) is the largest in a recent sequence of earthquakes in the central South Island, New Zealand. No surface rupture was observed, the aftershock distribution was complex, and routine methods of obtaining the faulting orientation of this earthquake proved contradictory. We use a range of data and techniques to obtain our preferred solution, which has a centroid depth of 5 km, M 0 =1.3 × 10 19 N m, and a strike, dip, and rake of 221°, 47°, 112°, respectively. Discrepancies between this solution and the Harvard centroid moment tensor, together with the Global Positioning System (GPS) observations and unusual aftershock distribution, suggest that the rupture may not have occurred on a planar fault. A second, strike slip, subevent on a more northerly striking plane is suggested by these data but neither the body wave modeling nor regional broadband recordings show any complexity or late subevents. We relocate the aftershocks using both one-dimensional and three-dimensional velocity inversions. The depth range of the aftershocks (1–10 km) agrees well with the preferred mainshock centroid depth. The aftershocks near the hypocenter suggest a structure dipping toward the NW, which we interpret to be the mainshock fault plane. This structure and the Harper fault, ∼15 km to the south, appear to have acted as boundaries to the extensive aftershock zone trending NNW-SSE. Most of the M L ≥ 5 aftershocks, including the two largest ( M L 6.1 and M L 5.7), clustered near the Harper fault and have strike slip mechanisms consistent with motion on this fault and its conjugates. Forward modeling of the GPS data suggests that a reverse slip mainshock, combined with strike slip aftershock faulting in the south, is able to match the observed displacements. The occurrence of this earthquake sequence implies that the level of seismic hazard in the central South Island is greater than previous estimates.

Arthur's Pass↗
USGS2010

Supraslab earthquake clusters above the subduction plate boundary offshore Sanriku, northeastern Japan: Seismogenesis in a graveyard of detached seamounts?

Thousands of offshore repeating earthquakes with low‐angle thrust focal mechanisms occur along the subduction plate boundary of NE Japan. Double‐difference relocation methods using P ‐ and S ‐wave arrivals reveal clusters of events above these repeating events. To assure good depth control we restrict our study to events that are close to seismic stations. These “supraslab” earthquake clusters are regional features at depths of 25 to 50 km, and most of these clusters are below the depth of the forearc Moho, which we determined from converted waves. Seismicity over this depth range does not occur under the inland area of NE Japan except just below the vicinity of the arc volcanoes. Re‐entrants in the inner trench slope indicate that repeated collisions of seamounts have occurred in the past. Our preliminary interpretation of supraslab clusters is that they represent seismicity in seamounts detached from the Pacific plate during slab descent, driven by the resistance of seamounts to subduction. Detachment during slab descent probably occurs on the sedimented and hydrothermally altered seafloor on which seamounts were originally constructed since these are known as zones of weakness during active island growth. High fluid pressure produced during dehydration of clay minerals and other low‐temperature hydrous minerals could enable detachment at depths. Seamount crust is thus accreted to forearcs, possibly leading to a long‐term component of near‐coastal uplift. Supraslab earthquake clusters may be our most direct evidence of the fates of seamounts and suggest that tectonic underplating is actively occurring in this subduction system.

Northeastern Japan↗
USGS2012

An interpretation of episodic slip on the Calaveras fault near Hollister, California

Data from a precision multi-wavelength distance measuring (MWDM) instrument, located near Hollister, California, have been analyzed in terms of strike-slip faulting in the region covered by the network. Four episodes of deformation that are readily identifiable in the MWDM data for the year following September 1975 can be modeled as slip on the Calaveras fault. Creepmeter data tend to support this interpretation, since the creep events and the observed episodes of deformation appear to be correlated in a temporal sense. Lower bounds on the moment for each episode of slip can be determined from the MWDM data by the technique of linear programing. The results indicate that aseismic slip is the dominant mechanism for strain release, since the combined moment of 1.16 × 10 24 dyn cm for the four episodes far exceeds the moment of all of the earthquakes that occurred during the year. Creepmeter data and geologic evidence that are taken in conjunction with the lower bound of the moment indicate that the depth of aseismic slip for some of the episodes of fault slip could extend to below the greatest depth of earthquake hypocenters for this region of central California.

Journal of Geophysical Research Solid Earth↗
USGS1997

Coseismic deformation of the Wrights tunnel during the 1906 San Francisco earthquake: A key to understanding 1906 fault slip and 1989 surface ruptures in the southern Santa Cruz Mountains, California

The Wrights tunnel is an abandoned railroad tunnel that crosses the San Andreas fault in the southern Santa Cruz Mountains in the vicinity of the 1989 Loma Prieta earthquake. The tunnel was damaged and deformed during the 1906 San Francisco earthquake and a plot showing postearthquake measurements made in the tunnel is given by Lawson [1908]. The amount of offset shown on this plot (1.5 m) has been used in several studies as being representative of the amount of fault offset along this segment of the San Andreas fault in 1906. Our historical research shows that different observers reported different amounts of fault offset in the tunnel and that the 1.5 m given on the plot is not a surveyed measurement. In addition, the plot of the tunnel has been interpreted in several previous studies as evidence of a broad (1.5 km) zone of faulting beneath Summit Ridge. Our analysis shows that this plot need not indicate a broad zone of deformation. Our historical research and modeling of the tunnel measurements indicate that faulting was confined to a zone less than 400 m wide and that 60–85% of the coseismic slip occurred across a single fault plane. There is no evidence for offset across a second shear zone beneath Summit Ridge in 1906. This implies that surface fractures reported on Summit Ridge in 1906 were not associated with significant deformation of the tunnel, implying that they were shallow, surficial features. By analogy, the very similar fractures that occurred on Summit Ridge in 1989 were also probably the result of shallow gravitational, rather than deep-seated tectonic, processes. Our modeling also indicates that total coseismic, near-surface slip across the San Andreas fault zone in the Wrights tunnel in 1906 was at least 1.7–1.8 m.

Journal of Geophysical Research B: Solid Earth↗
USGS2021

The Independent Volcanic Eruption Source Parameter Archive (IVESPA, version 1.0): A new observational database to support explosive eruptive column model validation and development

Eruptive column models are powerful tools for investigating the transport of volcanic gas and ash, reconstructing past explosive eruptions, and simulating future hazards. However, the evaluation of these models is challenging as it requires independent estimates of the main model inputs (e.g. mass eruption rate) and outputs (e.g. column height). There exists no database of independently estimated eruption source parameters (ESPs) that is extensive, standardized, maintained, and consensus-based. This paper introduces the Independent Volcanic Eruption Source Parameter Archive (IVESPA, ivespa.co.uk), a community effort endorsed by the International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Commission on Tephra Hazard Modelling. We compiled data for 134 explosive eruptive events, spanning the 1902-2016 period, with independent estimates of: i) total erupted mass of fall deposits; ii) duration; iii) eruption column height; and iv) atmospheric conditions. Crucially, we distinguish plume top versus umbrella spreading height, and the height of ash versus sulphur dioxide injection. All parameter values provided have been vetted independently by at least two experts. Uncertainties are quantified systematically, including flags to describe the degree of interpretation of the literature required for each estimate. IVESPA also includes a range of additional parameters such as total grain size distribution, eruption style, morphology of the plume (weak versus strong), and mass contribution from pyroclastic density currents, where available. We discuss the future developments and potential applications of IVESPA and make recommendations for reporting ESPs to maximize their usability across different applications. IVESPA covers an unprecedented range of ESPs and can therefore be used to evaluate and develop eruptive column models across a wide range of conditions using a standardized dataset.

Journal of Volcanology and Geothermal Research↗