Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of Contaminant Hydrology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,659 records · Page 17Linked to original sources
USGS1994

Hydrogeology of the Chickasaw National Recreation Area, Murray County, Oklahoma

The Travertine District (Park) of the Chickasaw National Recreation Area, operated and maintained by the National Park Service, is near the City of Sulphur in south-central Oklahoma. The Park was established in 1902 because of its unique hydrologic setting, which includes Rock Creek, Travertine Creek, numerous mineralized and freshwater springs, and a dense cover of riparian vegetation. Since the turn of the century several flowing artesian wells have been drilled within and adjacent to the Park. Discharge from many of these springs and the numbers of flowing wells have declined substantially during the past 86 years. To determine the cause of these declines, a better understanding of the hydrologic system must be obtained. The U.S. Geological Survey, in cooperation with the National Park Service, has appraised hydrologic information obtained for the Park from several studies conducted during 1902-87. The principal geologic units referred to in this report are the Arbuckle Group and the overlying Simpson Group. These rocks are of Upper Cambrian to Middle Ordovician age and are composed of dolomitic limestone, with some sandstones and shales in the Simpson Group. Surface geologic maps give a general understanding of the regional subsurface geology, but information about the subsurface geology within the Park is poor. The Simpson and Arbuckle aquifers are the principal aquifers in the study area. The two aquifers are not differentiated readily in some parts of the study area because of the similarity of the Simpson and Arbuckle rocks; thus, both water-bearing units are referred to frequently as the Arbuckle-Simpson aquifer. The aquifers are confined under the Park, but are unconfined east and south of the Park. Precipitation on the outcrop area of the Arbuckle aquifer northeast and east of the Park recharges the freshwater springs (Antelope and Buffalo Springs) near the east boundary of the Park. The source of water from mineralized springs located in the central part of the Park, and flowing wells within and north of the Park, is believed to be a mix of waters from rocks of the Arbuckle and Simpson Groups. The source of water from two highly mineralized springs, Bromide and Medicine, that ceased to flow in the early 1970’s is believed to be from the Simpson Group. Water-quality characteristics reflect the sources of ground water in the study area. The highly mineralized springs near the western end of the Park are a sodium chloride type with dissolved solids greater than 4,500 mg/L. The freshwater springs near the eastern end of the Park are a calcium bicarbonate type with total dissolved solids of less than 400 mg/L. Flow from the artesian wells has declined substantially during the past 86 years and the wells are estimated to currently discharge only about 10 percent of the total flow reported in 1939. The depletion is believed to be caused by a gradual lowering of the hydraulic head within the aquifer. The influence on the hydrologic system of local municipal and industrial pumping from the Arbuckle-Simpson aquifer is difficult to discern because the system is much more sensitive to precipitation than to pumpage. Ground-water levels and spring flows in this region respond rapidly to precipitation. The effects of withdrawals from the City of Sulphur and Oklahoma Gas and Electric Company power-plant water-well fields are not discernible at wells and springs. The hydrologic system may be influenced by pumping, particularly during extended dry periods of several years, but the impact of pumping on the system cannot be determined without further investigation.

Oklahoma↗
USGS1991

Reconnaissance of the occurrence of agricultural chemicals in ground water in Haywood, Lake, Obion and Shelby Counties, Tennessee

Data on the occurrence of agricultural chemicals in ground wafer in Tennessee are sparse. The surficial alluvial aquifer is an important source of domestic water supply in West Tennessee, and potentially is subject fo contamination from the application of agricultural chemicals in the area. Nineteen shallow wells completed in the alluvial aquifers in areas of high density agricultural use were sampled in the winter and again in the summer of 1988 to ascertain the occurrence of agricultural chemical in ground water. Although no triazine herbicides or organophosphorus insecticides were detected in any of the wells sampled, elevated nitrite plus nitrate (as nitrogen) concentrations were detected. Results from the winter sampling period indicate a range of nitrite plus nitrate (as nitrogen) concentrations of less than 0.1 to 7.8 milligrams per liter with a median concentration of 2.6 milligrams per liter. Results from the summer sampling period indicate a range of nitrite plus nitrate (as nitrogen) concentrations of less than 0.1 to 8.9 milligrams per liter, median, 2.5 milligrams per liter. The highest concentrations occurred in the shallowest wells, and, in one instance, in a shallow well near a heavily irrigated field.

Tennessee↗
USGS2026

Restoring dryland water cycles for precipitation feedback and climate stability; a review

Drylands across the globe are experiencing intensifying water scarcity, land degradation, and hydroclimatic extremes. This review integrates evidence from multidecadal field studies, hydrologic monitoring, geomorphic and ecological assessments, remote sensing, and land–atmosphere science to evaluate how restoration influences key components of the terrestrial water cycle. Low-tech natural infrastructure in dryland streams (NIDS)—including check dams, leaky weirs, one-rock dams, and gabions—has emerged as a promising but under-synthesized nature-based solution for restoring hydrologic function in these environments. We describe the mechanisms through which these interventions modify runoff detention, infiltration, sediment and alluvial storage, shallow-groundwater recharge, vegetation recovery, and surface-energy partitioning, and we summarize outcomes across diverse dryland settings. Findings consistently show increased water residence time, enhanced soil-moisture storage, expanded riparian vegetation, extended flow duration, and shifts toward greater latent-heat flux—producing localized cooling and strengthened ecohydrological feedbacks. Building on these localized effects, we articulate a hypothesis that links the spatial extent of restoration, the density of NIDS per unit drainage area, and the magnitude of the latent-to-sensible-heat contrast generated by wetter post-rainfall conditions. Specifically, we hypothesize that when NIDS are implemented at densities permitted by topography and across areas large enough to maintain elevated soil moisture after storm events, the resulting increases in latent heat flux, surface cooling, and boundary-layer moistening may enhance moisture convergence and boundary-layer development, potentially increasing the likelihood or stability of convective precipitation, analogous to how reductions in these processes have contributed to regional drought intensification. These land–atmosphere feedbacks remain untested at scale but represent an important research Frontier. By integrating hydrologic, geomorphic, ecological, and atmospheric perspectives, this review provides a comprehensive framework for considering how low-tech, landscape-scale interventions can strengthen watershed resilience and contribute to climate-relevant nature-based solutions.

Arizona↗
USGS2024

Groundwater and surface-water interactions in the Lower Duwamish Waterway, Seattle, Washington

The U.S. Geological Survey (USGS), in cooperation with the Washington State Department of Ecology (Ecology), conducted a study to describe the current understanding of the regional groundwater system of the lower Duwamish River valley and groundwater and surface-water interactions in the lower Duwamish Waterway. The lower Duwamish Waterway is the final 5-mile (mi) reach of the Duwamish River before it empties into Elliott Bay in Puget Sound near Seattle, Washington. A nearshore site (hereinafter referred to as “Nearshore Site” to distinguish the particular site from general discussions of nearshore areas) along the western shoreline of the Duwamish River, about 1.5 mi upstream from the river mouth, was selected for focused groundwater data collection by USGS. Data loggers were deployed in seven groundwater wells and one stilling well in the Duwamish River to measure specific conductance, temperature, and depth at 15-minute intervals for a period of about 2 years. At the Nearshore Site during 2020–22, water levels in the shallow wells were 3–8 feet (ft) higher than water levels in the deep wells, providing evidence for a low-permeability layer between the shallow and deep aquifers in this area. The shallow wells had a pronounced seasonal variability, with high water levels in winter and low water levels in summer. Data from the deep wells showed far less seasonal variability, with slight increases in winter and a near-constant water level from spring to autumn. The deep wells had a strong hydraulic connection to the Duwamish River, as evidenced by the synchronous water-level variability during the tidal cycle, whereas the shallow wells had minimal to no tidal response. The potentiometric maps developed for the Nearshore Site and surrounding areas indicate large differences in groundwater-flow directions for the shallow and deep aquifers at low and high tides. For the shallow aquifer, flow is toward the lower Duwamish Waterway near the Nearshore Site, regardless of the tidal condition. For the deep aquifer, a potentiometric trough forms parallel to the shoreline during high tide, indicating that groundwater flow converges from the uplands to the west and the Duwamish River to the east. The geometry of the potentiometric surfaces between the nearshore-most well and the shoreline is complex and is further confounded by intermittent shoreline armoring and other buried infrastructure, which could serve as either a barrier or a conduit to flow. Groundwater and surface-water interactions in the lower Duwamish Waterway are inherently complex as a result of three overarching factors. First, water levels in the lower reaches of the Duwamish River vary daily by 11–16 ft because of tides from Puget Sound, which create large swings in the hydraulic gradient in the nearshore groundwater system. Second, the density and chemical composition of water in the Duwamish River change daily with the tides and seasonally, which constrains how river water entering the nearshore sediments interacts with discharging groundwater. Third, the nearshore subsurface and shoreline conditions are heterogenous because of extensive shoreline armoring over the past century, which governs the flow of groundwater and infiltrating river water. These unique features of groundwater and surface-water interactions in the lower Duwamish Waterway thus govern the transport of terrestrial contaminants to the lower Duwamish Waterway. Furthermore, the heterogenous aquifer properties in the lower Duwamish Waterway contribute to spatially and temporally dynamic contaminant-transport processes.

Washington↗
USGS2025

Multidecadal change in pesticide concentrations relative to human health benchmarks in the Nation’s groundwater

Groundwater-quality trend assessments identify aquifers that are responding to changes in pesticide use and the compounds that may pose a threat to water availability. The U.S. Geological Survey has been monitoring pesticide concentrations in groundwater for 25 principal aquifers across the conterminous United States since 1993. The groundwater well locations represent a range of soils, climate, and landforms. The wells are used to monitor groundwater underlying selected agricultural and urban settings and groundwater used for domestic supply. This study examined changes in relative concentrations, defined here as the percentage of wells with pesticide concentrations exceeding a human health benchmark (HHB). HHBs used in this report are legally enforceable drinking-water standards and nonenforceable drinking water levels. Relative pesticide concentration increases may lead to decreased water availability, as restrictions may be put in place for groundwater used as a drinking-water source. This study focused on concentration changes in 22 pesticides that were included in laboratory analysis from 1993 to 2023. The analysis and interpretation of these pesticide concentrations in groundwater have been separated into approximate decadal intervals (decade 1 (1993–2001), decade 2 (2002–12), and decade 3 (2013–22). For one pesticide, 1,2-dibromo-3-chloropropane (DBCP), concentration data were also collected in decade 4 (2023–onward). Atrazine, deethylatrazine, alachlor, prometon, and simazine were 5 pesticides detected at moderate concentrations (greater than 10 percent of the HHB but less than or equal to the HHB). The percentage of wells that had groundwater pesticide concentrations in the moderate concentration category decreased from 7 percent in decade 1 to 2 percent in decade 3. The agricultural networks had the highest percentages of wells with moderate concentrations, and these percentages decreased from 13 percent in decade 1 to 4 percent in decade 3. Moderate concentrations in the urban networks decreased between decades 1 and 2 from 4 percent to 0 percent. No moderate concentrations occurred in the urban networks in decade 3. The percentage of wells with moderate concentrations in the domestic supply networks (1 percent) was the lowest of all the network types and did not change across the three decades. Moderate atrazine or deethylatrazine concentrations occurred across all three decades in aggregated ecoregions representing similar soils, climate, and landforms in the Semiarid West, Midcontinent, and Northeastern United States. Moderate concentrations of prometon, alachlor, and simazine also occurred in the Midcontinent, Arid West, Northeast, South Atlantic Gulf, and Semiarid West regions, but the moderate concentrations did not persist across all three decades. DBCP was the only pesticide that exceeded its respective HHB, and the exceedances occurred across all four decades. In this report, the DBCP analysis was limited to one well network in the Central Valley, California. Agricultural use of DBCP was suspended in 1977. Forty-five years after being banned, DBCP concentrations were greater than the maximum contaminant level of 2 micrograms per liter (μg/L), but the number of exceedances decreased from 50 percent to 15 percent of the samples between 1993 and 2023. This assessment of decadal groundwater pesticide concentrations provides a characterization of changes in water availability because of pesticide contamination in areas where groundwater is used as a drinking-water source. The results highlight the importance of continued long-term monitoring and assessment of groundwater pesticides to identify locations and specific compounds that may pose a potential risk to human health.

continental United States↗
USGS2025

Examining the compositional selectivity of hydrocarbon oxidation products using liquid–liquid extraction and solid-phase extraction techniques

The effect of extraction methods on detecting hydrocarbon oxidation products (HOPs) in groundwater remains unclear. HOPs are polar, water-soluble byproducts of petroleum biodegradation. Our previous work showed that liquid–liquid extraction (LLE), a method commonly used in regulatory monitoring, has a significantly lower extraction efficiency for HOPs compared to solid-phase extraction (SPE). In this study, we evaluate the analytical limitations and compositional selectivity of LLE and SPE using groundwater samples from the Bemidji, MN, crude oil spill site. Optical properties were characterized using excitation–emission matrix spectroscopy (EEMs), and a three-component PARAFAC model was validated, showing consistent trends across both extracts and whole water samples. Ultrahigh-resolution mass spectrometry (UHR-MS) revealed that LLE selectively recovered aliphatic-like compounds but underrepresented more polar oxygenated HOPs. In contrast, SPE methods were more effective at isolating highly oxidized compound classes. These differences were consistent across a gradient of contamination. Overall, the LLE was less precise and less representative of polar HOPs, introducing bias in the characterization of HOPs. This study is the first to quantitatively demonstrate the compositional selectivity and analytical bias of LLE versus SPE for HOPs using combined EEM-PARAFAC and UHR-MS techniques, with implications for long-term monitoring and site assessment protocols.

Environmental Science and Technology↗
USGS2026

Effects of groundwater withdrawals for water bottling and municipal use, Wards Brook Valley, Maine and New Hampshire

Hydrologic models for the Wards Brook valley near Fryeburg, Maine were developed for historical (2016 – 2021) and hypothetical future conditions (2046 – 2065 and 2080 – 2099) to understand the effects of groundwater withdrawals for bottled water and municipal use on hydrologic conditions (stream base flows and groundwater levels). Analyses showed that the simulated base flows in Wards Brook were reduced because of pumping for both municipal water supplies and for water bottling, and about half of the total pumping impact on the base flows in Wards Brook was from the bottled water extraction. Simulated flows were greater than the minimum recommended streamflow of 2,180 cubic meters per day (400 gallons per minute) throughout the historical period. Simulated groundwater levels at two of three nearby ponds (Round Pond and Davis Pond) were minimally affected by pumping conditions, and effects were primarily from the municipal well closest to the ponds. Several estimates of future projected recharge were used to understand the potential effects of groundwater withdrawals on hydrologic conditions under multiple hypothetical climate conditions. Annual projected recharge rates in the mid- and late-21st century from two climate scenarios (stabilized greenhouse-gas emissions and high greenhouse-gas emissions) were similar to rates for 2016 – 2021. However, monthly recharge patterns for the future periods shifted toward more recharge in the winter months (December, January, and February) and less recharge in April, May, and October relative to 2016 – 2021. The lowest mean monthly base flows from the future emission scenarios all remain larger than the minimum recommended streamflow and indicate no long-term declines in flow relative to historical conditions. However, simulated base flows during hypothetical 3-year drought scenarios declined below minimum recommended streamflow during the summer months in the stabilized- and high-emission scenarios in the mid-21st century. Although water is generally plentiful in the Wards Brook valley, reduced pumping may be needed to maintain streamflows in Wards Brook under future climate conditions similar to modeled drought scenarios.

EarthArXiv↗
USGS2026

Decadal trends and occurrence of geogenic constituents and mixtures in groundwater across the continental United States

Worldwide, about 50% of the population is served by groundwater-sourced drinking water. Numerous groundwater quality assessments have found that geogenic constituents are among the most common contaminants in drinking-water aquifers. Documenting changing groundwater quality is a crucial aspect of water availability assessments. We assess trends and occurrence of geogenic constituent concentrations in groundwater across the continental United States using 3 decades of data from the U.S. Geological Survey’s National Water Quality Network. Thousands of groundwater wells were grouped into agricultural, urban, or domestic supply network types. Although most networks and constituents had no statistically significant change in concentration, many had increasing concentration trends, elevated concentrations, or both. Lithium, sodium, radium, sulfate, and uranium had increasing trends in more than 10% of the study networks. Urban and domestic well networks had increasing lithium and sodium trends more often than agricultural networks. Manganese most commonly increased in domestic well networks; uranium more commonly increased in agricultural and urban networks. Elevated concentration mixtures were widespread, and mixture complexities appeared to increase over time. Our results indicate that more than 2.3 million domestic-well users may be affected by elevated concentrations of one or more geogenic constituents.

continental United States↗
USGS2025

Quantitative subsurface characterization illuminates the origin of the Quaternary Mississippi River Valley alluvial aquifer

The Mississippi River Valley alluvial aquifer (MRVA) is vital to U.S. food security and global agricultural supply. However, quantitative understanding of its Quaternary origin, architecture, and hydrologic function remains incomplete. Here we develop a three-dimensional hydrostratigraphic model to characterize the deposition of clay and silt, fine-medium sands, and graveliferous sands using lithologic data from 75,000 boreholes compiled across the Lower Mississippi Valley and a geostatistical method—interval kriging. We find that cyclic glacial entrenchments, evidenced by remnants of pre-Wisconsinan postglacial sediments, alongside geodynamic activities shaped the MRVA basal configuration. Stratal weakening from faulting and salt diapirism enhanced glacial incision and thereby produced abrupt aquifer thickening. We demarcate the top of graveliferous sands as the regional marker of the Pleistocene-Holocene transition. The MRVA hydrostratigraphy reveals hydrologic function and geologic controls on groundwater storage and quality, advancing the assessment of aquifer sustainability under a changing climate, with implications for alluvial aquifers globally.

Arkansas, Illinois, Kentucky, Louisiana, Mississip↗
USGS2025

Hydrogeologic investigation, framework, and conceptual flow model of the Antlers aquifer, southeastern Oklahoma, 1980–2022

The 1973 Oklahoma Groundwater Law (Oklahoma Statute §82–1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s groundwater basins to support a determination of the maximum annual yield for each groundwater basin. Every 20 years, the Oklahoma Water Resources Board is required to update the hydrologic investigation on which the maximum annual yield determinations were based. The maximum annual yield allocated per acre of land is used to set the equal-proportionate share pumping rate. The maximum annual yield of 5,913,600 acre-feet per year and equal-proportionate-share of 2.1 acre-feet per acre per year currently (2025) in place for the Antlers aquifer were issued by the Oklahoma Water Resources Board on February 14, 1995. Because more than 20 years have elapsed since the 1995 final order for the Antlers aquifer was issued, the U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, completed an in-depth hydrologic study that included a hydrogeologic framework and conceptual groundwater-flow model for the 1980–2022 study period. The results of an analysis of land use, long-term climate patterns, streamflow and base-flow patterns, historical groundwater use, as well as groundwater-level fluctuations across the Antlers aquifer are described. In addition, groundwater quality was analyzed for total dissolved solids concentrations and major ions for the Antlers aquifer. An updated hydrogeologic framework was developed that included refining the aquifer boundary in Oklahoma, the creation of new potentiometric surface and saturated thickness of fresh groundwater maps, one multiple-well aquifer test, slug tests, and an analysis of lithologic logs across the aquifer. A conceptual groundwater flow model and water budget were developed by incorporating estimates of recharge from precipitation, saturated-zone evapotranspiration, streambed seepage, lateral groundwater flows, vertical leakage, and withdrawals from groundwater wells.

Oklahoma, Texas↗
USGS2024

The 3D National Topography Model Call for Action—Part 1. The 3D Hydrography Program

The U.S. Geological Survey is initiating the 3D Hydrography Program (3DHP), the first systematic remapping of the Nation’s surface waters since the original 1:24,000-scale topographic mapping program was active from 1947 to 1992. Building on decades of experience maintaining the National Hydrography Dataset (NHD), the Watershed Boundary Dataset (WBD), and the NHDPlus High Resolution (NHDPlus HR), the 3DHP will completely refresh the Nation’s hydrography data and improve discovery and sharing of water-related data. The design of the 3DHP is based on the results of a study that estimated that the fully implemented program would have the potential to provide more than $1 billion in benefits to Federal, State, Tribal, Territorial, and local governments and to private and nonprofit organizations every year, in addition to myriad societal benefits. The 3DHP would directly support better decision making regarding water resources by providing more accurate, complete, and integrated information than is currently available. The 3DHP datasets will include a three-dimensional (3D) hydrography network generated from and integrated with elevation data from the 3D Elevation Program (3DEP) to better represent stream gradients and channel conditions, along with waterbodies, hydrologic units, hydrologically enhanced elevation and other surfaces, and more consistent and accurate attributes. The 3DHP datasets will inherit key attributes of the NHD, WBD, and NHDPlus HR, and they also will include new attributes and links to other data such as the U.S. Fish and Wildlife Service National Wetlands Inventory, groundwater data, and engineered hydrologic systems such as stormwater networks. The 3DHP will be designed to provide a set of open and interoperable web-based tools, maps, and data catalogs, creating a robust system for users to reference their information about water; the system elements are collectively referred to as the “infostructure.” The 3DHP and the infostructure can provide a foundational geospatial underpinning for the Internet of Water, a community-based effort to modernize tools and technologies to share water data. As proposed, the 3DHP would begin providing products and services to the public in 2024.

Circular↗
USGS1991

Effects of septic-tank effluent on ground-water quality in northern Williamson County and southern Davidson County, Tennessee

An investigation of the potential contamination of ground water from septic tank systems blasted in bedrock in Williamson and Davidson Counties, Tennessee, was conducted during 1988-89. Water samples were collected from domestic and observation wells, springs, and surface-water sites in a residential subdivision in the northern part of Williamson County near Nashville. The subdivision has a high density of septic-tank field lines installed into blasted bedrock Water samples also were collected from a well located in an area of Davidson County where field lines were installed in 5 feet of soil. Samples were analyzed for major inorganic constituents, nutrients, total organic carbon, optical brighteners, and bacteria. Although results of analyses of water samples from wells indicate no effect of septic-tank effluent on ground-water quality at these sites, water from two springs located downgradient from the subdivision had slightly larger concentrations of nitrite plus nitrate (2.2 and 2.7 milligrams per liter N), and much larger concentrations of fecal coliform and fecal streptococci bacteria (2,000 to 3,200 and 700 to 900 colonies per 100 milliliters of sample, respectively), than other wells and springs sampled during 1988. Water from one of these springs contained optical brighteners, which indicates that septic-tank effluent is affecting ground-water quality.

Tennessee↗
USGS2026

Emergent headwater types for watershed monitoring, research, and planning

Headwaters—that is headwater streams and the watersheds they drain—strongly influence water quality, ecosystem services, and hydrologic connectivity, yet remain poorly mapped, monitored, and understood at large spatial scales. Using available spatial data to classify headwater “types” could therefore enhance the utility of sparse monitoring data to advance research and watershed planning—and help update literature-based perceptual models of headwaters as steep, forested, and minimally disturbed watersheds. Here, we analyze headwaters across the contiguous United States to quantify how their attributes (climate, topography, land cover, soils) vary regionally and differ from their downstream watersheds. Our analysis (a) identified seven dominant headwater types with distinct combinations of biophysical and climatic attributes and (b) revealed systematic contrasts with downstream watersheds, with strongest differences in attributes representing potential flowpath depth. Our findings offer a transferable framework for classifying, modeling, and managing these critical yet understudied components of the hydrologic network.

conterminous United States↗
USGS2025

Beavers in the Tualatin River Basin, northwestern Oregon

Growing interest in beaver-assisted restoration in the Tualatin River Basin of northwestern Oregon motivated a series of studies by the U.S. Geological Survey to assess the capacity of the stream network to support beaver dams and to evaluate the effects of beaver dams and ponds on urban streams. This multichapter volume describes the data collection from 2016–17 and the findings of these studies, which were done in partnership with Clean Water Services. Chapter A documents the locations of beaver dams in the Tualatin River Basin and how many beaver dams the stream network could support with existing and improved riparian vegetation. Beaver dam capacity was estimated by modifying existing tools to account for the low gradient of many streams in the Tualatin River Basin. Chapter B describes the effects of beaver dams and ponds on hydrologic and hydraulic responses of storm flows. Hydrologic and hydraulic responses for two urban stream reaches were compared with and without beaver dams and ponds and for a range of streamflow conditions using two-dimensional hydraulic models. Chapter C characterizes the effects of beaver dams and ponds on the transport and deposition of suspended sediment. Continuous turbidity, discrete suspended-sediment samples, and streamflow measurements collected during storms and base-flow periods were used to assess: (1) suspended-sediment loads upstream and downstream from two beaver-affected reaches, and (2) seasonal and longitudinal turbidity patterns. Chapter D describes the effects of beaver dams and ponds on longitudinal, spatial, and seasonal water-quality patterns. Continuous and synoptic water-quality data were collected along urban stream reaches, and net ecosystem production was calculated for two beaver-affected reaches. The findings of these studies illustrate that the effects of beaver dams and ponds on hydrology, hydraulics, suspended-sediment transport and deposition, and water quality are dependent on the characteristics of a stream reach (for example, channel gradient, groundwater exchange, and riparian vegetation) and the characteristics of beaver dams and ponds along that reach. This information can be used to consider the implications of beaver-assisted restoration in the Tualatin River Basin and the effects of beaver dams and ponds in urban streams.

Oregon↗
USGS2025

Hydrogeologic framework and conceptual model of the Red River alluvial aquifer east of Lake Texoma, southeastern Oklahoma, 1980–2022

The 1973 Oklahoma Groundwater Law (Oklahoma Statutes §82-1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s groundwater basins to support a determination of the maximum annual yield for each groundwater basin. At present (2025), the Oklahoma Water Resources Board has not established a maximum annual yield for the Red River alluvial aquifer east of Lake Texoma. To support the evaluation and determination of a maximum annual yield, a hydrogeologic framework and conceptual groundwater-flow model were developed to assess groundwater availability in the Red River alluvial aquifer east of Lake Texoma. The scope of this hydrologic investigation is the alluvium and terrace containing the Red River alluvial aquifer in Oklahoma between Lake Texoma, the Texas State line, and the Arkansas State line, an extent referred to in this report as “the eastern part of the Red River alluvial aquifer.” Parts of the alluvium and terrace extent in Arkansas and Texas are included in some analyses to address hydrologic influences from outside the aquifer’s boundaries in Oklahoma. The eastern part of the Red River alluvial aquifer in southeastern Oklahoma consists of approximately 401,280 acres of Quaternary alluvium and terrace deposits associated with the Red River and its major tributaries. Mean annual recharge to the aquifer for the 1980–2022 study period was estimated to be 8.62 inches per year, or 17.98 percent of the mean annual precipitation over the same period (47.94 inches). This mean annual recharge rate is equivalent to an inflow of approximately 288,250 acre-feet per year for the eastern part of the Red River alluvial aquifer. Recharge estimated using the Soil-Water-Balance code accounts for 98.7 percent of the conceptual-model inflows to the eastern part of the Red River alluvial aquifer. Saturated-zone evapotranspiration accounts for 11.9 percent and net streambed seepage accounts for 87.4 percent of the outflows in the conceptual model.

Arkansas, Oklahoma, Texas↗
USGS1996

Technique for estimating magnitude and frequency of peak flows in Maryland

A convenient and reliable technique for estimating flood magnitudes is required for effective flood-plain management and for the efficient design of bridges, culverts, embankments, and flood-protection structures. Methods are presented for estimating peak-flow magnitudes of selected frequencies, ranging from 2 to 500 years, for all nontidal drainage basins in Maryland. The methods were developed by generalized least-squares regression techniques using data from 219 gaged basins in and near Maryland. The State is divided into five hydrologic regions: the Appalachian Plateaus and Allegheny Ridges region, the Blue Ridge and Great Valley region, the Piedmont region, the Western Coastal Plain region, and the Eastern Coastal Plain region. These regions correspond to the physiographic provinces of the State, with the exceptions that (1) the Coastal Plain Province is divided into two hydrologic regions, and (2) there is no distinct hydrologic region corresponding to the Valley and Ridge Province as it is divided into its constituent Allegheny Ridges and Great Valley subdivisions. Sets of equations for calculating peak discharges based on physical basin characteristics are provided for each of the regions. Based on the peak-flow equations, methods for estimating peak flows are presented for ungaged and gaged streams in Maryland. The methods and equations are supported by generalized least-squares analysis of basin and flood-frequency characteristics data from 219 drainage basins in and near Maryland. estimates for each of the five regions are calculated using combinations of the fol-lowing basin characteristics: drainage area, forest cover, basin relief, carbonate rock coverage, storage, and runoff-curve number. Drainage area contributes to the estimate in all five study regions. Carbonate rock coverage is used only in the Blue Ridge and Great Valley region. Storage and runoff-curve number are used solely in the Eastern Coastal Plain region. All other basin characteristics are used in two or more regions. Standard errors of estimate for the regression equations range from 19 to 31 percent in the Appalachian Plateaus and Allegheny Ridges region, 34 to 47 percent in the Blue Ridge and Great Valley region, 33 to 48 percent in the Piedmont region, 45 to 64 percent in the Western Coastal Plain region, and 36 to 42 percent in the Eastern Coastal Plain region.

Maryland↗
USGS2024

Estimating domestic self-supplied water use in Rhode Island, 2014–21

Water withdrawal from private groundwater wells is often unaccounted for in water planning studies, and water from private wells can be a source of exposure to environmental contaminants. The sizes of populations that depend on private wells for domestic water use and the amounts of water that are withdrawn from these wells are generally poorly represented in data collection efforts because of the challenges of locating, metering, or gathering withdrawal information from individual property owners. To address this problem, the U.S. Geological Survey, in cooperation with the Rhode Island Water Resources Board, estimated the volume of water withdrawn from domestic self-supply wells and the populations who use them for the State of Rhode Island at a 30-meter pixel spatial resolution and one-month temporal resolution between July 2014 and June 2021. The number of people reliant on domestic self-supply wells has increased in Rhode Island over the study period; however, the statewide estimate of total water withdrawal has not statistically increased. Withdrawals from private wells are largest in the inland areas of the western part of the State, and the towns of Scituate and Charlestown have the highest estimated withdrawals. Statewide monthly withdrawals ranged from 3.987 million gallons per day in March 2018 to 7.767 million gallons per day in September 2016. The median per capita domestic water use rate was 46.0 gallons per capita per day.

Rhode Island↗
USGS2024

A conceptual framework to assess post-wildfire water quality: State of the science and knowledge gaps

Wildfire substantially alters aquatic ecosystems by inducing moderate to catastrophic physical and chemical changes. However, the relations of environmental and watershed variables that drive those effects are complex. We present a Driver-Factor-Stressor-Effect (DFSE) conceptual framework to assess the current state of the science related to post-wildfire water-quality. We reviewed 64 peer-reviewed papers using the DFSE framework to identify drivers, factors, stressors, and effects associated with each study. A total of five drivers were identified and ranked according to their frequency of occurrence in the literature: atmospheric processes > fire characteristics > ecologic processes and characteristics > land surface characteristics > soil characteristics. Commonly reported stressors include increased nutrients, runoff, and sediment transport. Furthermore, although several different factors have been used at least once to explain water-quality effects, relatively few factors outside of precipitation and fire characteristics are frequently studied. We identified several gaps indicating the need for long-term monitoring, multi-factor studies, consideration of organic contaminants, consideration of groundwater, and inclusion of soil characteristics. This assessment expands on other reviews and meta-analyses by exploring causal linkages between influential variables and overall effects in post-wildfire watersheds. Information gathered from our assessment and the framework itself can be used to inform future monitoring plans and as a guide for modeling efforts focused on better understanding specific processes or to mitigate potential risks of post-wildfire water quality.

Water Resources Research↗