SEARCH · Geology Reports

Results for “General Information Product”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

831 records · Page 17Linked to original sources

USGS2025

Near-surface material and topography generate anomalous high-frequency ground motion amplification in Chugiak, Alaska

An ∼3 km long nodal array oriented approximately east–west was deployed in Chugiak, Alaska, by the U.S. Geological Survey during 2021. The array intersects with the permanent NetQuakes station NP.ARTY, where peak ground acceleration (PGA) value of 1.98 g was recorded during the 2018 M w 7.1 Anchorage, Alaska, earthquake, in sharp contrast to the PGA of ∼0.3 g at a site just 4 km to the west. Seismic data for M w 1.8–4.3 aftershocks from the M w 7.1 event recorded by the nodal array confirm the anomalously large ground motions obtained at NP.ARTY as well as similar amplifications at nodes within ∼1 km to the east. Here, we performed 0–10 Hz 3D finite‐difference simulations, including high‐resolution surface topography, to explore the cause of the unexpectedly large amplification. As expected, the simulations computed with a regional 3D tomography velocity model severely underpredict the 0–10 Hz acceleration records at almost all sites. Adding a near‐surface low‐velocity taper to 300 m depth amplifies the accelerations by up to a factor of 5 and enables a reasonable match between the nodal data and simulations at sites to the west of NP.ARTY. However, this model still underpredicts the spectral energy in the area covered by glacial sediments by up to an order of magnitude. The addition of a till layer using a depth‐dependent shear‐wave velocity ( ⁠⁠ V s ) profile along with a homogeneous, 8 m thick low‐velocity layer with V s = 250 m/s representing the kame terraces improves the fit to data to within a factor of 2 at nodes located on top of the glacial sediments. Our study shows that the anomalously large high‐frequency amplification recorded at and near NP.ARTY can be explained by a combination of topographic effects and near‐surface low‐velocity material with amplification effects on the high‐frequency ground motion by up to about 40% and an order of magnitude, respectively.

Alaska↗

USGS2025

Estimating the hypothetical endowment of critical minerals and other commodities in porphyry copper mine waste in the Four Corners states, USA

Society is fundamentally dependent upon commodities that are used in end-use products for the aerospace, defense, energy, telecommunication, and transportation sectors, resulting in centuries of mining to supply these commodities and materials. Waste from these mining operations can remain on the landscape indefinitely, but there is a lack of national understanding of the distribution and scale of such waste features. The renewable energy transition will continue to increase demand for critical minerals and will result in increasing volumes of mine waste on the Earth’s surface. Reprocessing mine waste can reduce environmental risks and recover needed commodities to match growing demand for societal growth. Therefore, understanding the approximate abundance of commodities that may be available for recovery within mine waste features can be an important piece of domestic critical mineral supply.

Arizona, Colorado, New Mexico, Utah↗

USGS2024

Bedrock geologic map of the Woodstock quadrangle, Grafton County, New Hampshire

The bedrock geology of the Woodstock 7.5-minute quadrangle consists of highly deformed metasedimentary rocks of the Central Maine trough, including the Silurian Rangeley and Perry Mountain Formations and the Devonian Littleton Formation. The central, northern, and eastern parts of the quadrangle are underlain by the oldest rocks in the area, the Rangeley Formation. In the southwest and south-central part of the quadrangle, metaturbidites of the Perry Mountain Formation and subsequent Littleton Formation overly the Rangeley Formation in a deformed F 1 synform, herein informally called the Bagley Brook basin. The metasedimentary rocks were intruded by widespread syn- to post-tectonic granitoids of the Devonian New Hampshire Plutonic Suite and minor post-metamorphic Jurassic-Cretaceous mafic dikes of the White Mountain Plutonic-Volcanic Suite. The metasedimentary rocks were affected by at least two episodes of deformation in the Devonian Acadian orogeny. The dominant regional foliation is second-generation (S 2 /D 2 ) and formed during the development of sillimanite-muscovite mineral assemblages. Large bodies of the Early Devonian Kinsman Granodiorite intruded the metasedimentary rocks semi-concordantly during D 2 deformation. Dikes of the Late Devonian Concord Granite cut the Kinsman Granodiorite and the metasedimentary rocks and were emplaced either syn- or post-D 2 . The map pattern in the Rangeley Formation is dominated by northeast to northwest trending, moderately to steeply north-dipping F 2 and F 3 folds. Map-scale F 1 folds are defined by the Bagley Brook basin. Previous division of Rangeley Formation stratigraphy in this region into “upper” and “lower” parts was not corroborated by 1:24,000-scale mapping of lithodemic units, and rocks previously mapped as part of the Smalls Falls and Madrid Formations are here reassigned to the Rangeley Formation. Some rocks previously mapped as the lower part of the Littleton Formation are now assigned to the Perry Mountain Formation. The Littleton Formation on this map is approximately equivalent to rocks previously mapped as the upper part of the same formation. Steeply dipping fractures in the quadrangle show a preferred northeast orientation, consistent with subsurface fracture orientations in the well fields near Mirror Lake. Jurassic-Cretaceous mafic dikes and normal faults show preferred northeast orientations, similar to the fractures, suggesting that the extensional stress field that controlled dike orientation during the Mesozoic also produced the dominant brittle fabrics in the area.

New Hampshire↗

USGS2026

Deaf, deafblind, and hard of hearing university student experiences with earthquake early warning in the United States: Evaluating language planning and technology access

The growing literature on deaf and hard of hearing (DHH+) populations and disasters demonstrates that emergency communication (including alerts) is not reaching global DHH + individuals with dangerous impacts for morbidity and mortality. This is the first research study in the U.S. to qualitatively explore the experiences of DHH + persons with earthquake early warning (EEW) through group-based dialogue sessions. The study investigates eight DHH + university students'past earthquake experiences, access to EEW alerts, and perceptions of ShakeAlert Ⓡ , an EEW system for detecting earthquakes and alerting residents of California, Oregon, and Washington. Findings highlight key gaps in disaster alert usability within four thematic areas: lack of messaging in participants' language(s), unclear alert messaging, deficient message delivery mechanisms for deafblind persons, and insufficient access to earthquake information and training that leads to dependence on informal information networks. Weaknesses identified in these four themes reduce DHH + trust in EEW systems and compromise the capacity of alert recipients to take swift protective action or to mentally prepare before shaking starts. The study also underscores structural factors such as insufficient linguistic representation in disaster language planning and technology design, which ignores the linguistic and sensory access needs of DHH + individuals. Building on disaster language planning frameworks, we recommend involving DHH + populations to co-develop EEW alerts. By centering DHH + perspectives, this research contributes to ongoing efforts to ensure that EEW systems reach everyone.

California↗

USGS2023

Hidden system identification: Basin modeling as a tool for examining sedimentary geothermal resource potential

Three-dimensional (3D) geologic and temperature models have been developed for the onshore U.S. Gulf Coast. The results from these models identify areas of moderate- to high-temperature (90°-150°C and >150°C; respectively) geothermal resources at depths <6 km. This modeling study addresses the fundamental challenge of predicting where opportune temperature and lithology coincide. Unlike traditional geothermal systems with surface expressions of hydrothermal circulation (e.g., hot springs, fumaroles, sinter), sedimentary geothermal systems (SGS) are generally hidden. Historically, simplified efforts to predict subsurface temperatures in sedimentary basins have focused on linear temperature extrapolation that does not consider the variable thermal properties of different lithologies or lithologic changes with depth (e.g., compaction, lithification). Therefore, the need to understand basin architecture and predict temperatures in 3D within SGS is paramount to identifying geothermal resources and determining economic feasibility. Basin modeling software has long been used to characterize the subsurface conditions of sedimentary basins, including temperature, in the pursuit of finding hydrocarbons. This tool can also be adapted to evaluate the potential of geothermal resources in a sedimentary basin by predicting the confluence of desirable temperatures and reservoir lithologies. In this work, PetroMod basin modeling software was used to create a regional geologic model of the onshore U.S. Gulf Coast, covering over 500,000 km 2 calibrated to temperature data from wells. Inputs include structural surfaces from commercial databases, lithology information derived from published literature, and corrected bottom-hole temperatures (BHT) from over 6,000 wells. The resulting 3D geologic model can be used to predict temperatures throughout the basin. Maps were exported showing the depth, depositional unit, and reservoir lithology at which temperatures of 90°C and 150°C were reached, revealing over 400,000 km 2 of moderate- to high-temperature resources at depths <6 km. These maps function as a first-order screening tool to identify areas where low-, moderate-, or high-grade resource potential may exist, based on temperature and if optimal reservoir lithologies or depositional units of interest are present. Depending on the success criteria of a project, the same maps can be exported for any isotherm or incorporate other 1407 Gardner and Birdwell subsurface properties. The methodology employed in this work can be applied in any sedimentary basin with available subsurface data. Further calibration incorporating other data, including pressure and porosity, can expand the utility of basin modeling for geothermal evaluations. Basin modeling is a powerful but underutilized tool for identifying prospective geothermal resources in sedimentary basins.

Conference Paper↗

USGS2024

Diel temperature signals track seasonal shifts in localized groundwater contributions to headwater streamflow generation at network scale

Groundwater contributions to streamflow sustain aquatic ecosystem resilience; streams without significant groundwater inputs often have well-coupled air and water temperatures that degrade cold-water habitat during warm low flow periods. Widespread uncertainty in stream-groundwater connectivity across space and time has created disparate predictions of energy and nutrient fluxes across headwater networks, hindering predictions of cold-water habitat resilience under climate change scenarios. Recently, annual paired air and water temperature signals have been harnessed to indicate stream water thermal sensitivity and the dominance of deep versus shallow groundwater influence, although the utility of diel air–water temperature signal metrics for hydrologic inference has remained unexplored. Here we analyzed two consecutive years of locally paired, air–water temperature data from 47 headwater stream sites in the Catskill Mountains, New York, USA, and discovered characteristic seasonal patterns in diel temperature signal sinusoid metrics (amplitude ratio, phase lag, and mean ratio) driven by shifts in streamflow generation mechanisms and stream network position. Hydrologic interpretations of observed patterns were supported by stream heat budget model scenarios and additional analysis of paired air–water temperature data from two streams in Shenandoah National Park, Virginia, USA, with well characterized stream-groundwater connectivity. We found that within smaller tributaries, streamflow generation transitions from runoff to groundwater dominance were driven by hillslope drying during seasonal periods of lower precipitation. This was evidenced by significant correlations (p < 0.01) between daily water:air temperature signal amplitudes (non-linear decreases of ∼ 50 %) and derived base-flow index at 22 of the 28 sites, indicating enhanced local groundwater influence on streamflow promotes decoupling of diel air–water temperature signals. Additionally, ratios between daily water:air temperature signal means were lower in tributaries (∼0.68) when compared to main-stem (∼0.8) sites, increasing linearly throughout the observational period. In conceptual stream heat budget models, groundwater inflow had minimal effects on daily phase lags (∼0.2 hr), but increases in fractional groundwater discharge (0–50 %) depressed daily amplitude (∼20 % to 50 %) and mean ratios (∼15 %), supporting the sensitivity of daily metrics to interpreted changes in seasonal groundwater contributions to streamflow. During observational periods (i.e., April through October 2021 and 2022), significant differences (p < 0.01) between tributary and main-stem air–water metrics occurred when base-flow contributions were highest (∼0.93 vs. ∼ 0.68), as sites lower in the network had daily temperature metrics dominated by stream channel thermal inertia, rather than local groundwater connectivity, showing enhanced air–water diel signal coupling during warmer, drier periods. Divergent air temperature coupling across the network was interpreted as being driven by distance from local groundwater source zones, additional lateral groundwater inflows do not contribute a meaningful fraction to channel discharge lower in the network. Given the growing footprint of stream temperature observations, diel air–water temperature signals can provide distributed metrics sensitive to upstream groundwater discharge. Consequently, these metrics can support ongoing efforts by resource managers and researchers seeking to forecast the resilience of cold-water habitat to climate warming and changing precipitation regimes in mountain headwater streams.

New York, Virginia↗

USGS2026

The value of electronic tagging and tracking studies for understanding fish–hypoxia interactions

Objective Hypoxia (i.e., low dissolved oxygen availability) is a natural phenomenon but can also be induced by human activities (e.g., nutrient enrichment from runoff). Given that dissolved oxygen is essential for aquatic life, periods of hypoxia tend to have negative consequences (e.g., sublethal disturbances, mortality) for most fishes. Extensive laboratory research has documented hypoxia thresholds and physiological and behavioral outcomes for a variety of freshwater and marine fishes and there is also an extensive body of fieldwork assessing population-level responses (e.g., survival, distribution). Yet, studying how individual fish respond to hypoxia in the wild has proved challenging; electronic tagging and tracking tools (e.g., biotelemetry, biologging) have made it easier to study individual responses to hypoxia and complement other tools like hydroacoustics that tend to focus on population-level responses. Methods We review what has been learned from contemporary studies that employ electronic tagging and tracking tools to understand how fish respond to hypoxia in the wild. Topics explored include identifying and validating hypoxia thresholds, habitat compression, connectivity, mortality, physiological and bioenergetic consequences, and extreme weather conditions. We also consider what we have learned about evaluating various management plans for hypoxia and reflect on how electronic tags have also been used in aquaculture systems and in hybrid studies that combine laboratory and field research. We highlight fishes in Lake Erie as a research narrative to demonstrate how electronic tagging and tracking have markedly improved our understanding of a longstanding hypoxia issue. Results Our synthesis revealed that electronic tagging and tracking have provided critical information on how fish respond to hypoxia in the field, revealing complex trade-offs and compensatory mechanisms as well as cryptic hypoxia-induced mortality. Beyond just illuminating space use and mortality, tags equipped with various sensors are revealing how fish deal with hypoxia in real time in terms of physiology, bioenergetics, and behavior. Conclusions As electronic tagging and tracking methods experience further innovation and are increasingly applied to understand the effects of hypoxia on fish, we expect more unanticipated findings about the effects of hypoxia on fish in all aquatic ecosystems, which will strengthen our ability to manage and mitigate hypoxia. Combining tools and approaches (e.g., lab and field) is perhaps the best way to generate comprehensive understanding.

Transactions of the American Fisheries Society↗

USGS2026

Effects of a low-lipid diet on the gut microbiome and head kidney transcriptome of juvenile Chinook Salmon

Objective Pacific salmon Oncorhynchus spp. reared in production hatcheries are typically fed high-lipid, energy-dense diets to achieve large size and high body condition prior to release. In contrast, juveniles in natural environments tend to consume low-lipid, high-protein diets, and fish reared for research or conservation purposes are sometimes fed diets that are formulated to mimic natural diets and promote wild-like phenotypes. Understanding how these alternative diets affect fish health beyond growth and body condition could ultimately contribute to improving hatchery fish fitness. Methods In this work, we evaluated changes in the fecal microbiome and gene expression of juvenile Chinook Salmon O. tshawytscha on a standard high-lipid hatchery diet versus a low-lipid diet formulated to mimic the nutrition profile of natural-origin fish. To evaluate the time scale at which diet alters the fecal microbiome, we collected longitudinal samples over a 12-week period and switched the diets of a subset of fish twice during the experiment. We used 16S ribosomal RNA gene amplicon sequencing to characterize fecal microbiome differences between fish on the two diets as well as hatchery-reared fish at a production hatchery, hatchery fish that had been captured after release into a stream, and natural-origin, stream-reared fish of similar ages. Additionally, we conducted RNA sequencing on head kidney samples from laboratory-reared fish to evaluate changes in gene expression in this important immune organ. Results We found that the low-lipid diet and the hatchery diet resulted in microbiomes that differed from the microbiome of natural-origin fish and from each other and that diet-driven changes to the microbiome could occur in under 14 d. The low-lipid diet did not result in a microbiome that resembled the microbiome of naturally produced fish. Instead, the low-lipid diet resulted in a microbiome community that was distinct from those of fish reared on the hatchery diet and fish sampled from the wild. The RNA sequencing results indicated differential enrichment of pathways related to immunity, metabolism, and hormone synthesis between fish that were fed the two experimental diets. Conclusions The results suggest that additional environmental factors influence the microbiome more strongly than diet formulation or that the low-lipid diet has a smaller effect on the microbiome than a natural, invertebrate-based diet. Given that the gut microbiome and systemic immune function contribute significantly to disease resistance, our findings highlight the importance of understanding how diets fed to fish in captivity may affect fish health beyond growth and body condition metrics.

Journal of Aquatic Animal Health↗

USGS2024

New methodology for assessing underground natural gas storage resources – Example from Michigan Basin, United States

Energy consumption in the United States (U.S.) and across the world is shifting away from traditional fossil fuels like coal and oil, and towards natural gas and renewable sources, including hydrogen. Because gas demand is typically greatest during cold seasons and renewable sources sometimes produce variable supplies, it is important to store energy for use when demand exceeds supply. Whereas batteries and tanks typically store energy above ground, geologic (underground) storage may be able to retain much greater quantities of energy over much longer durations (e.g., Matos et al. 2019; Buursink et al. 2023). Consequently, the U.S. Geological Survey (USGS) is developing a methodology to locate new geologic energy storage sites with an initial focus on depleted hydrocarbon reservoirs followed by estimates of associated pore space or gas storage capacity. Depleted hydrocarbon fields in Michigan Basin in the U.S. already host large quantities of injected natural gas (about 681 billion cubic feet of seasonal gas capacity in 42 gas storage facilities; U.S. Energy Information Administration 2024). Therefore, we used this basin as an example to assess potential new storage resources alongside existing storage capacity and carbon dioxide sequestration resources (e.g., Katz and Coats 1968; Haagsma et al. 2020). In Michigan Basin gas storage is taking place in reservoirs within several key hydrocarbon producing formations with different lithologies, including the informal Stray sandstone of the Michigan Formation and the pinnacle reefs of the Niagara Group (Gautier et al. 1995; Swezey et al. 2015). The assessment methodology introduced here consists of two steps relying on both well information and reservoir data.

Michigan↗

USGS2025

The Hardscrabble Creek complex: A newly discovered, mostly buried, Mesoproterozoic mafic-ultramafic pluton in the Wet Mountains, Colorado, USA

The origin of prolific ca. 1.4 Ga ferroan magmatism between the southwestern USA and eastern Canada is enigmatic and has been explained by various models, including extensional, mantle plume, and convergent plate-margin models. Rare mafic plutons are associated with the ferroan plutons, which may help constrain their mantle source and tectonic setting. In the southwestern USA, only two such mafic plutons are known to exist. We present the first evidence for a third, mostly buried, potentially layered, mafic-ultramafic Mesoproterozoic pluton, informally referred to as the Hardscrabble Creek complex, in the central Wet Mountains of Colorado, USA. Recent geophysical data show an elliptical magnetic and gravity high spatially coincident with local gabbroic outcrops. New field and petrographic analyses of these exposed rocks reveal that they consist of ultramafic to mafic cumulates, including orthopyroxenite, olivine norite, norite, and anorthosite. High-precision U-Pb dating of zircon from orthopyroxenite and norite yield weighted mean 206 Pb/ 238 U dates of 1352.36 ± 1.60 Ma and 1352.37 ± 1.71 Ma, respectively. These dates indicate that the complex formed over a narrow timeframe, after the adjacent 1362 ± 7 Ma ferroan San Isabel Granite, and during the waning stages of the regional ca. 1.4 Ga ferroan magmatism. Whole-rock geochemistry and Nd-Sr-Pb isotope compositions of samples from the Hardscrabble Creek complex are similar to those of the San Isabel Granite, suggesting that they were derived from the same or a similar mantle source. The mineral chemistry of the samples is comparable to Proterozoic massif-type anorthosites and related mafic intrusions, indicating that the Hardscrabble Creek complex and San Isabel Granite together represent a rare anorthosite-mangerite-charnockite-granite (AMCG) suite in the southwestern USA. The Hardscrabble Creek complex is unique because it formed ~80 m.y. after the other few mafic plutons in the southwestern USA, and it contains an ultramafic section that is absent from these plutons and rare to the AMCG suite in general. A combination of arc-like whole-rock geochemistry, chondrite uniform reservoir-like Nd-Sr-Pb isotopes, and ocean island basalt (OIB)-like zircon trace element chemistry suggests that the complex was derived from a partial melt of OIB-like mantle and interacted with metasomatically enriched lithospheric mantle. The enriched lithospheric mantle signature, combined with the long ~160 m.y. duration of magmatism in the region, is consistent with a period of protracted convergent tectonism.

Colorado↗

USGS2024

Earthquake-triggered ground-failure inventory associated with the M7.1 2018 Southcentral Alaska earthquake

The 30 November 2018, magnitude (Mw) 7.1 earthquake in Southcentral Alaska triggered substantial landslides, liquefaction, and ground cracking throughout the region, resulting in widespread geotechnical damage to buildings and infrastructure. Despite a challenging reconnaissance and remote-sensing environment, we constructed a detailed digital inventory of ground failure associated with the event from several sources. Sources included information derived from remotely sensed data, and data compiled from literature, social media postings, and earthquake damage information compiled by local, state, and federal agencies. Each instance of ground failure within the inventory contains information on the location and type of observed ground failure, and the methods and data used to document the occurrence. Where high-quality data, such as LIDAR or satellite imagery, were available and showed the ground-failure instance clearly, the extent is mapped as a polygon or polyline. All other locations are mapped as points. There are a total of 886 ground-failure instances documented within the inventory (400 landslides, 286 liquefaction features, and 200 features unattributed to specific processes). A semi-quantitative confidence scheme is used to describe mapping certainty associated with each ground-failure feature. This inventory represents a relatively moderate ground-failure-triggering event that occurred in a subarctic environment. This data paper describes the content within the inventory, the inventory data collection procedures, and limitations of the data. Events of this type are not often documented in detail; thus, adding the inventory data to the US Geological Survey Open Repository of Earthquake-Triggered Ground-Failure Inventories further diversifies the datasets available to the scientific community to be used to better understand and model earthquake-triggered ground failure.

Alaska↗

USGS2024

Volcanic gas monitoring

Introduction As magma rises through the crust, decreasing pressure conditions allow volatiles to exsolve from the magma. These volatiles then migrate upward through the crust, where they can be stored at shallower levels or escape to the atmosphere. Rising magma also heats rock masses beneath volcanic centers, causing water in shallow aquifers and hydrothermal systems to boil and release additional gases and steam (see chapter F , this volume; Ingebritsen and Hurwitz, 2024). The chemistry and quantity of gases that reach the surface during periods of quiescence or volcanic unrest can reveal that gas-rich magma is ascending, crystallizing, or alternatively stalling, with important implications for volcanic hazard (for example, Sutton and others, 1992; Aiuppa and others, 2007, 2021; Werner and others, 2009, 2011, 2012; Moretti and others, 2013; de Moor and others, 2016; Lewicki and others, 2019; Edmonds and others, 2022; Kern and others, 2022; Kunrat and others, 2022). Most volcanoes in Alaska and the western United States are characterized by weak degassing, with one or more low-temperature fumaroles (typically near the local boiling temperature of water) and connect to a deeper and sometimes extensive hydrothermal system (for example, McGee and others, 2001; Symonds and others, 2003a, b). Hydrothermal systems will affect the chemistry of rising gases exsolved from deeper magma (Symonds and others, 2001), including sulfur dioxide (SO 2 ), hydrogen chloride (HCl), and water vapor (for example, Doukas and Gerlach, 1995; Gerlach and others, 1998, 2008; Symonds and others, 2001; Werner and others, 2013). As an example, depending on factors such as temperature, pressure, and oxidation state, rising SO 2 will react with groundwater to form hydrogen sulfide (H 2 S) gas, dissolved sulfate (SO 4 2− ), or elemental sulfur (Christenson, 2000; Symonds and others, 2001; Werner and others, 2008). The reaction and dissolution of SO 2 into shallow groundwater is commonly referred to as scrubbing, and can reduce the likelihood that ascending, degassing magma can be detected. Carbon dioxide, however, in addition to exsolving from magma early in the ascent process, is not easily removed by hydrothermal fluids (Lowenstern, 2001). As scrubbing and other processes take place, the SO 2 /H 2 S, CO 2 /SO 2 , and CO 2 /H 2 S ratios may change. High rates of SO 2 emission indicate that magma has moved to relatively shallow levels in the volcano and that the system has heated up enough to establish dry pathways from depth to the surface. Monitoring multiple gas species and the total output of those species is thereby useful for volcano monitoring during both periods of quiescence, to establish background degassing conditions, and during unrest, when gas geochemistry and emission rates can provide information on changing conditions, such as magma ascent. To provide context for multidisciplinary volcano forecasts, we focus on the following two key required capabilities: (1) characterizing baseline geochemistry and gas discharge from volcanoes and volcanic regions and (2) monitoring changes in gas geochemistry and discharge to inform forecasts of volcanic eruptions and their effects. Sufficient baseline data must be collected to identify and interpret anomalous degassing associated with volcanic unrest (for example, Sorey and others, 1998; Rouwet and others, 2014). Differences in volcano type, baseline degassing rates, local hydrology, and geography (for example, high versus low latitude) will result in a different baseline for each volcano. Volcanoes of any threat level that exhibit one or more degassing phenomena would ideally be monitored by techniques needed to establish baseline degassing data, with the sampling frequency of baseline data dictated by the threat level (table E1). Additional monitoring techniques become necessary during periods of unrest. In general, three of the most important techniques for gas monitoring are (1) direct sampling of fumarole, spring, and soil gases for laboratory geochemical measurements, (2) measurements of the chemical composition of the volcanic plume and emission rates of major gas species (for example, H 2 O, CO 2 , SO 2 , and H 2 S) by satellite, airborne, or ground-based techniques, and (3) measurements of diffuse emissions of CO 2 and other gases through soils. Various methods and instruments may be useful both for baseline studies and during unrest.

Scientific Investigations Report↗

USGS2024

Updated three-dimensional temperature maps for the Great Basin, USA

As part of the periodic update of the geothermal energy assessments for the USA (e.g., last update by Williams and others, 2008), a new three-dimensional temperature map has been constructed for the Great Basin, USA. Williams and DeAngelo (2011) identified uncertainty in estimates of conductive heat flow near land surface as the largest contributor to uncertainty in previously published temperature maps. The new temperature maps incorporate new conductive heat flow estimates developed by DeAngelo and others (2023). Predicted temperatures at depth are compared with representative measurements (for conductively dominated conditions), showing good agreement under relatively simple uniform conditions. Inputs included radiogenic heat production for all layers of 1.89 μW/m 3 , effective bulk thermal conductivity of 2.7 W/m/°C for all rocks underlying sedimentary basins, and a previously published (Williams and DeAngelo, 2011) empirically driven estimate of increasing thermal conductivity with depth in sedimentary sequences. The resulting three-dimensional temperature model is published in a USGS data release associated with this manuscript (Burns and others, 2023).

Arizona, California, Idaho, Nevada, Oregon, Utah↗

USGS2024

Relatively stable pressure effects and time-increasing thermal contraction control Heber geothermal field deformation

Due to geological complexities and observational gaps, it is challenging to identify the governing physical processes of geothermal field deformation including ground subsidence and earthquakes. In the west and east regions of the Heber Geothermal Field (HGF), decade-long subsidence was occurring despite injection of heat-depleted brines, along with transient reversals between uplift and subsidence. These observed phenomena contradict current knowledge that injection leads to surface uplift. Here we show that high-yield production wells at the HGF center siphon fluid from surrounding regions, which can cause subsidence at low-rate injection locations. Moreover, the thermal contraction effect by cooling increases with time and eventually overwhelms the pressure effects of pressure fluctuation and poroelastic responses, which keep relatively stable during geothermal operations. The observed subsidence anomalies result from the siphoning effect and thermal contraction. We further demonstrate that thermal contraction dominates long-term trends of surface displacement and seismicity growth, while pressure effects drive near-instantaneous changes.

California↗

USGS2026

Synthesizing a twelve-year sediment trap time series of planktic foraminiferal flux in the Gulf of America (Mexico)

Sediment trap time series provide powerful frameworks for testing hypotheses about planktic foraminiferal assemblage composition, seasonality, and geochemical responses to environmental variability, all of which are central to improving paleoceanographic reconstructions. We present high resolution foraminiferal assemblage data from a long-running sediment trap (2008–2020) in the northern Gulf of America (Mexico). This study summarizes the species composition, seasonality, and size distribution of the fifteen most abundant species of planktic foraminifera, which account for 98% of total flux. Foraminiferal flux peaks in winter and reaches a minimum in summer, following the seasonal pattern of primary production in the northern Gulf. Winter assemblages are dominated by non-spinose taxa, whereas spinose taxa prevail during summer. Across nearly all species, average monthly test size covaries with temperature, independent of seasonal flux trends. Notably, Trilobatus sacculifer and Neogloboquadrina dutertrei show a significant decline in relative abundance and flux during 2017–2020, nearly disappearing from the assemblage.

Journal of Foraminiferal Research↗

USGS2025

Water-resources inventory and assessment at Katahdin Woods and Waters National Monument

The U.S. Geological Survey, in cooperation with the National Park Service, prepared a water-resources inventory and assessment for Katahdin Woods and Waters National Monument (KAWW). This compilation includes published and publicly accessible hydrologic data and resource assessments of streams, rivers, ponds, lakes, wetlands, vernal pools, and groundwater in and near KAWW. It also includes reports and datasets summarizing attributes of KAWW’s hydrologic infrastructure, such as stream crossings, dams, wastewater discharge plants, groundwater monitoring wells, and U.S. Geological Survey streamflow-gaging stations. Descriptions of data and details of current limitations in available datasets are included. Wetland, groundwater, streamflow, and water-quality information are all limited. Hydrography data are available; however, there are limited ground-truth data. Accurate streamlines within KAWW were developed from light detection and ranging (lidar) as a part of this work. Hydrologic infrastructure information is available from multiple sources; however, differences exist among the datasets. Datasets are summarized in appendix 1.

Maine↗

USGS2025

Gulf Coast Basin CORE-CM initiative final report

The Bureau of Economic Geology at the University of Texas at Austin (UT-BEG) is leading the Gulf Coast Carbon Ore, Rare Earth, and Critical Minerals (CORE-CM) Initiative to assess the potential to produce critical minerals (CMs), including rare earth elements (REEs) from coal, coal ash, and produced water related to oil and gas production, and related materials (alumina processing waste [red mud], heavy mineral sands, graphite, and zeolite) within the Gulf Coast Basin. This project represents the first phase in a long-term program and provides reconnaissance data that will be foundational for future work by assessing resources and suggesting plans to be conducted in future work and expanding stakeholder engagement. The project includes several tasks designed to identify, characterize, and assess several necessary aspects for development of CMs and REEs in the Gulf Coast Basin.

Gulf Coast basin↗

USGS2025

Melt generation sources and conditions in the wake of a migrating slab window: Geochemistry and petrology of the million-year history of primitive volcanism at Clear Lake volcanic field, California

Clear Lake volcanic field (CLVF) is the northernmost and youngest (~2.2 Ma to 8 ka) of the volcanic centers distributed along the San Andreas transform fault in western California. The initial phase of CLVF volcanism (interval one) occurred between ~2.2 and 1.3 Ma and extends ~35 km southeast of Clear Lake, forming a semi-continuous upland plateau capped by lava flows, with isolated volcanic remnants on the periphery. This volcanism is broadly characterized by geochemically primitive compositions that reflect three source compositions and conditions of melt generation. (1) Partial melting of upwelling asthenospheric mantle lherzolite at moderate pressures (1.2–1.4 GPa) and temperatures (1297–1329 °C) produced high-CaO (9.8–11.3 wt %) basalts with high Al 2 O 3 (16.8–17.6 wt %), Mg#s (66–70), MgO (8–10 wt %), Ni (103–262 μg/g), and Cr (284–609 μg/g). These high-CaO basalts contain olivine (Fo 87–91 ) phenocrysts with Cr-spinel inclusions ± subordinate plagioclase and crop out only in the southern part of the CLVF. (2) Partial melting of depleted sub-continental lithospheric mantle harzburgite at variable pressures (0.7–1.5 GPa) and temperatures (1097–1299 °C) produced a compositional continuum of med-K 2 O, calc-alkaline, high-MgO basalts through high-MgO andesites with high Mg#s (67–77), MgO (8–14 wt %) and high Ni and Cr abundances (154–439 and 340–1124 μg/g, respectively). Mineral assemblages are olivine (Fo 88–93 ) with Cr-spinel inclusions ± subordinate clinopyroxene, orthopyroxene and plagioclase. Small (<2.5 cm) mantle harzburgite xenoliths and mantle olivine xenocrysts are also found in several of these samples. These high-MgO basalts through andesites represent the largest volume of primitive compositions and have erupted predominantly along the main, fault-controlled northwest-southeast trending axis of volcanism with peripheral outcrops to the north, west, and east. (3) Partial melting of the Gorda eclogite slab edge produced adakitic silicic slab melts with strong depletion in the heavy rare earth elements (Yb = 0.6 μg/g). Subsequent reaction of those melts with depleted ultramafic rocks during ascent imprinted the adakitic dacites with high Mg#s (65–78) and elevated Ni (117–210 μg/g) and Cr (191–283 μg/g). Phenocrysts of orthopyroxene (En 87–94 ) with spinel inclusions (Cr# = 80–88) and extremely Ni-rich (9483 μg/g) olivine cores (Fo 84–93 ) record those reactions. Small-volume outcrops of the adakites on the eastern periphery of the CLVF track the passing slab edge. The trio of melting sources recorded by early CLVF magmatism reflect the tectonically complex environment and the hot (1097–1329 °C), shallow (0.7–1.5 GPa) melting conditions for these primitive compositions and provide estimates of the heat delivered to the crust. Over time, this flux led to maturation of the CLVF magmatic system toward the more voluminous and silicic volcanism that characterizes the balance of its subsequent volcanic history and maintains the present-day anomalously high heat flow in the region. The current interval (interval four) of volcanic activity at CLVF is characterized by low-volume, fault-controlled eruptions of basaltic andesite and andesite suggestive of mantle magma and heat delivery to the crust, similar to interval one. This analogous activity provides motivation for the current study and begs the question of whether the system is undergoing thermal priming for renewed silicic volcanism.

California↗