Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Deep Sea Research Part II: Topical Studies in Oceanography”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,614 records · Page 17Linked to original sources
USGS2026

Patterns and drivers of cliff erosion in Big Sur, California, USA using repeat photogrammetry, 2017–2023

Seacliff erosion in steep terrain poses major risks to transportation and critical infrastructure. In Big Sur, California, USA, seacliff erosion threatens the sustainability of the central coast stretch of California State Route 1, a transportation corridor that is critical to the region's economy. Published cliff retreat rates for the region range from 1 to 40 cm yr −1 , highlighting that high-resolution, process-based studies could enhance understanding of the causes of spatial and temporal variability. We quantified cliff erosion and investigated its drivers along ∼13 km of the Big Sur coastline at week–month timescales during the late fall to early spring wet seasons between January 2017 and June 2023 by analyzing 3D point clouds developed from aerial imagery using four-dimensional structure-from-motion (4D SfM) photogrammetry techniques. We calculated cliff face retreat rates of 2.23 ± 3.06 cm yr −1 (mean ±1 σ ), an order of magnitude lower than long-term estimated rates for the region (which included large deep-seated landslides), but in line with short-term rates reported across California. Change detection imagery comparison, cliff profiles through time, and statistical analysis reveal a cyclical cliff evolution process in which erosion by wave action at the cliff base destabilizes the cliff and primes it for subsequent failure during precipitation events. Although more erosion by volume could be attributed to precipitation-induced increases in soil moisture (784 m 3 km −1 yr −1 ) compared with erosion attributed to wave power (282 m 3 km −1 yr −1 ), our observations underscore the coupled nature of these processes in driving cliff evolution, consistent with established theory and observations.

California↗
USGS1998

Characterization of hydrogeologic units using matrix properties, Yucca Mountain, Nevada

Determination of the suitability of Yucca Mountain, in southern Nevada, as a geologic repository for high-level radioactive waste requires the use of numerical flow and transport models. Input for these models includes parameters that describe hydrologic properties and the initial and boundary conditions for all rock materials within the unsaturated zone, as well as some of the upper rocks in the saturated zone. There are 30 hydrogeologic units in the unsaturated zone, and each unit is defined by limited ranges where a discrete volume of rock contains similar hydrogeologic properties. These hydrogeologic units can be easily located in space by using three-dimensional lithostratigraphic models based on relation- ships of the properties with the lithostratigraphy. Physical properties of bulk density, porosity, and particle density; flow properties of saturated hydraulic conductivity and moisture-retention characteristics; and the state variables (variables describing the current state of field conditions) of saturation and water potential were determined for each unit. Units were defined using (1) a data base developed from 4,892 rock samples collected from the coring of 23 shallow and 8 deep boreholes, (2) described lithostratigraphic boundaries and corresponding relations to porosity, (3) recognition of transition zones with pronounced changes in properties over short vertical distances, (4) characterization of the influence of mineral alteration on hydrologic properties such as permeability and moisture-retention characteristics, and (5) a statistical analysis to evaluate where boundaries should be adjusted to minimize the variance within layers. This study describes the correlation of hydrologic properties to porosity, a property that is well related to the lithostratigraphy and depositional and cooling history of the volcanic deposits and can, therefore, be modeled to be distributed laterally. Parameters of the hydrogeologic units developed in this study and the relation of flow properties to porosity that are described can be used to produce detailed and accurate representations of the core-scale hydrologic processes ongoing at Yucca Mountain.

Nevada↗
USGS2025

High-precision earthquake catalog for Minto Flats fault zone, central Alaska, reveals complex and conjugate faulting

The Minto Flats fault zone (MFFZ) in central Alaska is a left‐lateral strike‐slip fault system situated between the continental‐scale right‐lateral Denali and Kaltag‐Tintina faults. The MFFZ has the potential to generate magnitude 7 earthquakes, and it hosted a magnitude 6 earthquake in 1995. It has also produced exotic events, such as very‐low‐frequency earthquakes and nucleation signals. We use network‐matched filtering and relative earthquake relocation techniques to derive a detailed catalog of earthquake locations for the MFFZ. The catalog spans from August 2014 to December 2019, a time period including 13 temporary seismic stations in the region. Our results provide the most complete catalog for the MFFZ and include deeper events, clusters of shallow seismicity, and a complex and segmented fault structure not observed in the original regional catalog. We document right‐lateral strike‐slip faulting, conjugate to the main northeast‐striking left‐lateral faults of the MFFZ. Below Nenana basin, the relocated seismicity reveals northwest‐dipping left‐lateral faults, supporting the inference that deep crustal active faulting is associated with recent basin deformation.

Alaska↗
USGS2026

Landslide volume estimation from seismic waveform features using a global catalog of seismogenic events

Seismic waves generated by large, rapid landslides encode information about the source and can be analyzed rapidly following an event. Even remote landslides can pose hazards to downstream communities, so rapid detection and characterization using existing seismic monitoring networks could be beneficial. In this study, we expand on past regionally limited work by presenting a globally applicable method for estimating landslide volume from seismic features that could be integrated into future landslide seismic monitoring frameworks. We train the model using multivariable linear regression and five seismic features derived from recordings of 129 landslide events of a range of styles and locations with independently estimated volumes. We present two preferred models, one that combines long‐period (LP) and high‐frequency (HF) features and one for use on smaller landslides without observed long‐period signals. We find that our best‐performing model, applicable to landslides larger than 100,000 m 3 with signals containing observable long‐period energy, requires only two features: LP (20–100 s) absolute maximum amplitude and HF (1–5 Hz) rise time (time between the signal start and the maximum envelope amplitude) and has an R 2 score of 0.79. This model predicted volumes within one order of magnitude for 55 out of 58 events. We find that this combination mitigates the trade‐off between mass and acceleration and other variations of landslide style that limit methods based on amplitude alone.

Seismological Research Letters↗
USGS2024

Bedrock geologic map of the Woodstock quadrangle, Grafton County, New Hampshire

The bedrock geology of the Woodstock 7.5-minute quadrangle consists of highly deformed metasedimentary rocks of the Central Maine trough, including the Silurian Rangeley and Perry Mountain Formations and the Devonian Littleton Formation. The central, northern, and eastern parts of the quadrangle are underlain by the oldest rocks in the area, the Rangeley Formation. In the southwest and south-central part of the quadrangle, metaturbidites of the Perry Mountain Formation and subsequent Littleton Formation overly the Rangeley Formation in a deformed F 1 synform, herein informally called the Bagley Brook basin. The metasedimentary rocks were intruded by widespread syn- to post-tectonic granitoids of the Devonian New Hampshire Plutonic Suite and minor post-metamorphic Jurassic-Cretaceous mafic dikes of the White Mountain Plutonic-Volcanic Suite. The metasedimentary rocks were affected by at least two episodes of deformation in the Devonian Acadian orogeny. The dominant regional foliation is second-generation (S 2 /D 2 ) and formed during the development of sillimanite-muscovite mineral assemblages. Large bodies of the Early Devonian Kinsman Granodiorite intruded the metasedimentary rocks semi-concordantly during D 2 deformation. Dikes of the Late Devonian Concord Granite cut the Kinsman Granodiorite and the metasedimentary rocks and were emplaced either syn- or post-D 2 . The map pattern in the Rangeley Formation is dominated by northeast to northwest trending, moderately to steeply north-dipping F 2 and F 3 folds. Map-scale F 1 folds are defined by the Bagley Brook basin. Previous division of Rangeley Formation stratigraphy in this region into “upper” and “lower” parts was not corroborated by 1:24,000-scale mapping of lithodemic units, and rocks previously mapped as part of the Smalls Falls and Madrid Formations are here reassigned to the Rangeley Formation. Some rocks previously mapped as the lower part of the Littleton Formation are now assigned to the Perry Mountain Formation. The Littleton Formation on this map is approximately equivalent to rocks previously mapped as the upper part of the same formation. Steeply dipping fractures in the quadrangle show a preferred northeast orientation, consistent with subsurface fracture orientations in the well fields near Mirror Lake. Jurassic-Cretaceous mafic dikes and normal faults show preferred northeast orientations, similar to the fractures, suggesting that the extensional stress field that controlled dike orientation during the Mesozoic also produced the dominant brittle fabrics in the area.

New Hampshire↗
USGS2026

Decoding the oxidative digestion mechanism for polystyrene nanoplastic detection in the Great Lakes using a customizable Raman spectral processing algorithm

Despite the concerns surging around nanoplastics (NPs) regarding their prevalence and bioavailability in freshwater systems, robust detection of NPs in complex environmental matrices is hindered by the lack of standardized sample pretreatment and a mechanistic understanding of oxidative digestion. Here, we systematically investigate the interaction between hydrogen peroxide (H 2 O 2 ) and polystyrene (PS) NPs during digestion in deionized (DI) water and four environmental matrices from in and around the Great Lakes Basin. To facilitate high-throughput analysis, we develop Pre_peak, a customizable Raman spectral processing algorithm that achieves >99% accuracy for both NP identification and interference rejection, allowing reliable NP quantification via pixel counting and systematic decoding of the oxidative digestion mechanisms. In DI water, varying H 2 O 2 doses from 0 to 30% has negligible effects on the recovery and Raman signal intensity of PS NPs over 24 hours of digestion. However, morphological changes and aggregation of PS NPs are observed when the H 2 O 2 dose exceeds 20%. Prolonged digestion further leads to progressive NP loss. In natural waters, the optimal dosage and digestion duration depend on matrix characteristics, including dissolved organic matter (DOM) and ion composition. This study provides mechanistic insights into NP–oxidant interactions and underscores the need for matrix-tailored digestion protocols to advance standardized NP detection in freshwater environments.

Great Lakes↗
USGS2025

Stratigraphy, structure, and geomorphology of the central Appalachians across the North Mountain fault zone near Harrisonburg, Virginia, USA

This field trip focuses on the geology of the central Appalachian Valley and Ridge province near Harrisonburg, Virginia, USA. Recent geologic mapping utilizing 1-m resolution lidar data has revealed new insights into the Paleozoic stratigraphy, structural geology, and Neogene landscape evolution of the region. The detailed mapping reveals the presence of the Big Spring Station Member and multiple thrombolite zones in the Cambrian Conococheague Formation extending as far south as the Briery Branch 7.5 min quadrangle, providing insights into Late Cambrian sea-level fluctuations. Multiple outcrop exposures in the study area of this guidebook confirm recent work in Pennsylvania, USA, showing that the Ordovician Reedsville Shale overlies the Martinsburg Formation and that the two are distinct and mappable as separate formations rather than laterally equivalent units as previously interpreted. Our work extends the Silurian Williamsport Sandstone into Shenandoah County, Virginia, and describes its facies relationships with the Bloomsburg Formation along strike and across the Adams Run anticline. Mapping within the thick Devonian siliciclastic sequence reveals the presence of the Mahantango Formation on the western limb of Supin Lick syncline and illustrates its complex facies relationship with the Millboro Shale. In addition, we highlight new mapping criteria for the Brallier and Foreknobs Formations and demonstrate how the specific changes to the placement of the contact between them addresses previous challenges in their differentiation. We present cosmogenic burial ages of broad alluvial fan sediments in the Shenandoah Valley near Timberville and Briery Branch, Virginia, and erosion rates estimated for the Briery Branch stream basin. Both analyses provide new constraints on the timing of landscape evolution and karst development since the middle Pliocene. This field guide also highlights some significant structural features within the North Mountain fault zone, such as evidence of imbricated thrust sheets cut by cross-strike faults that have been exploited by Eocene igneous intrusions. Map-scale horses of Silurian and Ordovician rocks hold up ridges that are oblique to the regional strike. Deformation internal to one of these horse blocks is shown to be non-coaxial with respect to the main regional northwest directed transport.

Virginia↗
USGS2024

Generalized potentiometric maps of the Fort Union, Hell Creek, and Fox Hills aquifers within the Standing Rock Reservation

Generalized potentiometric surfaces of the Fort Union, Hell Creek, and Fox Hills aquifers were constructed to assess the groundwater resources of the Standing Rock Reservation. Additionally, this information can provide water managers with tools and data to effectively manage water resources in the future. Previous studies that mapped the geology and hydrogeology of the area at differing scales were used to confirm in which aquifer the study wells were completed. Water-level data from wells are provided by the U.S. Geological Survey Groundwater System Inventory database, the South Dakota Department of Agriculture and Natural Resources, and the North Dakota Department of Water Resources. Hydrographs were constructed for five selected observation wells to evaluate historical water-level fluctuations and trends. Hydrographs for the Hell Creek aquifer showed a flat trend with a rise in 2020. Hydrographs for the deeper Fox Hills aquifer showed that water levels fluctuated in response to climatic conditions and demonstrated an increasing trend in water-level elevations starting in 2010. Hydrographs were not constructed for any wells completed in the Fort Union Formation because none of the wells had continuous long-term measurements. Generalized potentiometric surfaces, constructed from interpolating water-level elevations, gave insight into groundwater flow directions. Groundwater in the Fort Union aquifer likely flows radially outward from the northwest part of the study area to the northeast and south-southeast parts. Groundwater in the Hell Creek aquifer generally flows from higher elevations in the northwest towards lower areas, where surface-water tributaries have incised into the aquifer. Groundwater in the Fox Hills aquifer likely flows from higher elevations in the west, southwest, and central parts of the study area towards the valleys of the Grand River and Missouri River. Most wells used for constructing potentiometric maps had only one recorded water-level measurement from drillers at the time of well construction. These measurements are often subject to error because the well is still recovering and because of spatial limitations of data availability. Also, because single water-level measurements were recorded at different points in time, additional uncertainty is introduced by fluctuating climatic conditions effect on water levels. Potentiometric map interpretation limitations are a result of areas with sparse data. Limitations also arise from potentiometric surfaces generalizing a complex and dynamic hydrogeologic system; however, the generalized potentiometric surface maps can be used to assist water managers and can help prioritize locations for future monitoring in areas with high uncertainty from sparse existing data.

North Dakota, South Dakota↗
USGS2026

Interplay between tectonics and submarine mass transport deposits in Cortes Basin: New high-resolution geophysics in the Outer California Borderland

The Outer California Borderland (OCB) is an active transform plate boundary offshore Southern California, where the relationship between faulting and submarine mass transport deposits (MTDs) remains poorly understood. Onshore paleoseismic data provide high-resolution earthquake records, whereas marine geophysical data capture longer-term histories. Offshore fault systems pose hazards to infrastructure and dense coastal populations, particularly when linked to submarine landslides. We present new high-resolution geophysical data set (cruise SR2303), including bathymetric and CHIRP sub-bottom data integrated with legacy seismic reflection data and chronostratigraphic constraints from ODP Site 1012 to examine Quaternary MTD recurrence and tectonic controls in the Cortes Basin, OCB. Bathymetry shows deformational features, including slide scarps and previously unmapped fault segments with evidence of Holocene activity. CHIRP profiles reveal 10 stacked MTDs in the East Cortes Basin and 8 in the West Cortes Basin, spanning ∼752 ka with an average recurrence of ∼83.6 ± 1 ka. Acoustic imaging shows 7 MTD intervals coinciding with fault offset increments and fault growth suggesting earthquake-triggered mass wasting. A strong association between MTD occurrences and sea-level extremes also supports glacio-eustatic contribution to slope failure. Stratigraphic correlations suggest quasi-synchronous MTDs across the eastern and western areas, likely triggered by larger eathquakes in the Quaternary. Although the identified MTDs occur relatively far from the Southern California coast, they still pose a potential tsunamigenic hazard requiring further assessment. Moreover, if linked to earthquakes along major strike-slip faults, for example, the Ferrelo fault, the MTDs may provide valuable proxies to constrain rupture scenarios and fault connectivity within the understudied OCB.

California↗
USGS2026

Determining Volcanic Risk in Auckland (DEVORA) Research Programme—A transdisciplinary approach to address the challenge of distributed volcanism in an urban environment

The Determining Volcanic Risk in Auckland (DEVORA) Research Programme was launched in 2008 to address the challenges associated with monogenetic volcanism in an urban setting and to enhance volcanic risk management in Tāmaki Makaurau Auckland in Aotearoa New Zealand. It is a multi-agency, increasingly transdisciplinary (defined here as research that transcends traditional disciplinary boundaries by integrating diverse types of knowledge, perspectives, and methods from academic and non-academic participants to create novel solutions to complex problems), and collaborative research program jointly led by Waipapa Taumata Rau University of Auckland and Earth Sciences New Zealand (ESNZ; formerly GNS Science), with core funding from Natural Hazards Commission Toka Tū Ake (NHC; formerly the Earthquake Commission, EQC) and Te Kaunihera o Tāmaki Makaurau Auckland Council (AC). The primary research focus of DEVORA is to investigate the geologic history, volcanic hazards, and risk posed by the basaltic intraplate Auckland Volcanic Field. Disruption from ash fall and gas from other Aotearoa New Zealand volcanoes is also considered. DEVORA’s work to explore exposure and vulnerability in Tāmaki Makaurau Auckland is also useful for assessing risks from other non-volcanic natural hazards, such as seismic and tsunami hazards. The greater Tāmaki Makaurau Auckland region has an ethnically and socio-economically diverse population of approximately 1.7 million, representing about one-third of the Aotearoa New Zealand population, and hosts critical infrastructure of national significance. The size and nature of the populace, consequential economic base, and important infrastructure within Tāmaki Makaurau Auckland mean that the effects of a volcanic eruption would be felt nationally, including through the disruption of air travel to Aotearoa New Zealand. The hazards from such an eruption could potentially affect hundreds of thousands of people, businesses, and lifelines (critical infrastructure). A considerable challenge for emergency and risk managers is the monogenetic nature of the volcanic field. It is not known where or when the next eruption will occur, how much warning we may get before an eruption, nor how an eruption and its effects might unfold. In this contribution, we highlight the concept and collaborative intent of the DEVORA Programme and show how it has evolved over the 16 years since its inception. We describe how DEVORA has unified more than 100 researchers (including more than 50 graduate students) and numerous stakeholders to address key issues facing Tāmaki Makaurau Auckland and describe how research findings are being implemented into policy and communicated to stakeholder agencies and the public. We also illustrate the broader influence of the DEVORA Programme and provide some learnings that might benefit others embarking on similar integrated projects, especially those focused on distributed volcanism in and near populated areas.

Auckland↗
USGS2024

RegionGrow3D: A deterministic analysis for characterizing discrete three-dimensional landslide source areas on a regional scale

Regional-scale characterization of shallow landslide hazards is important for reducing their destructive impact on society. These hazards are commonly characterized by (a) their location and likelihood using susceptibility maps, (b) landslide size and frequency using geomorphic scaling laws, and (c) the magnitude of disturbance required to cause landslides using initiation thresholds. Typically, this is accomplished through the use of inventories documenting the locations and triggering conditions of previous landslides. In the absence of comprehensive landslide inventories, physics-based slope stability models can be used to estimate landslide initiation potential and provide plausible distributions of landslide characteristics for a range of environmental and forcing conditions. However, these models are sometimes limited in their ability to capture key mechanisms tied to discrete three-dimensional (3D) landslide mechanics while possessing the computational efficiency required for broad-scale application. In this study, the RegionGrow3D (RG3D) model is developed to broadly simulate the area, volume, and location of landslides on a regional scale (≥1,000 km 2 ) using 3D, limit-equilibrium (LE)-based slope stability modeling. Furthermore, RG3D is incorporated into a susceptibility framework that quantifies landsliding uncertainty using a distribution of soil shear strengths and their associated probabilities, back-calculated from inventoried landslides using 3D LE-based landslide forensics. This framework is used to evaluate the influence of uncertainty tied to shear strength, rainfall scenarios, and antecedent soil moisture on potential landsliding and rainfall thresholds over a large region of the Oregon Coast Range, USA.

Journal of Geophysical Research: Earth Surface↗
USGS2026

The digital archivist: Automating legacy macroseismic data processing using large language models

Macroseismic data are a key resource to investigate shaking and damage from preinstrumental and early instrumental eras. However, data are often stored as inconsistently formatted reports describing observed shaking and damage, making manually parsing and interpreting accounts labor‐intensive. We introduce a novel workflow using Google’s Gemini 2.5 Pro large language model (LLM) to automate the extraction and structuring of macroseismic observations from summary reports. We apply this workflow to the 22 March 1957 M 5.3 Daly City, California, earthquake as a case study. We used Gemini to extract addresses, originally assigned modified Mercalli intensity values, and descriptions from each report. To address coordinate precision limits, addresses were geocoded via Google’s Geocoding application programming interface. This workflow yielded over 2300 geocoded intensity reports for the Daly City earthquake. We use the geocoded accounts, with the original report intensity assignments, to develop a shaking intensity map that in some respects rivals modern Did You Feel It? Maps. We also extract and present data for the 9 February 1971 M L 6.7 Sylmar, California, earthquake. Our results demonstrate the potential of LLMs for reliably extracting and analyzing large, unstructured macroseismic datasets. LLMs offer a scalable solution for rapidly digitizing macroseismic archives, enabling their broader use to constrain ground‐motion models in modern seismic hazard analysis and to improve our understanding of site effects in urban areas. The concepts explored here may also be applied to the handling of other legacy seismological and earth science data.

Seismological Research Letters↗
USGS2025

Reduction of red bed sedimentary rocks in connection with energy metal ore formation: A case study from the Sinbad seep, Mesa County, Colorado

The Paradox Basin’s Sinbad seep is a modern analog for ancient bleaching of red bed sediments by introduced alkaline, reducing brines. This bleaching, involving reductive alteration of former red beds, is essential ground preparation that enables the altered rocks to trap Cu, U, and V from later oxidized fluids, forming ore deposits. Study of Sinbad thus offers insights into these metallic mineralization processes in the Paradox and other sedimentary basins. The Sinbad seep occurs where shallow groundwater interacts with organic-rich petroleum source rocks, flows up a fault, and discharges into Salt Creek. Ratios of Na/Cl, Na/Br, and Cl/Br, plus high sulfate concentrations, indicate that the salinity of the seep water originated from dissolution of halite and gypsum during topographically driven flow of meteoric water across a diapir of the Pennsylvanian Paradox Formation, rather than from deep basinal brines. In contact with the organic-rich shales of the Paradox, these SO 4 -rich waters become reduced through bacterial reduction, producing H 2 S. The waters react with red beds of the Permian Cutler Formation, causing pervasive bleaching. The bleaching at Sinbad is characterized by iron-conservative reduction of ferric iron in diagenetic hematite and detrital ilmenite and magnetite to Fe sulfides. The ferrous iron is retained in these sulfides likely as sorbed Fe. Associated alteration includes precipitation of quartz and feldspar overgrowths, partial dissolution of detrital quartz and feldspar caused by pressure solution, formation of clay and authigenic rutile, and precipitation of carbonate and gypsum. The Fe sulfides rapidly degenerate to a mixture of jarosite and iron oxides on weathering at the surface. Among the major-oxide elements and most trace elements, there is no statistical difference between unbleached and bleached samples. The exceptions are uranium and sulfur, which are somewhat greater in bleached samples. Fission track radiography illuminates that uranium is preferentially concentrated in iron oxide cements, iron sorbed into detrital clasts, and finely disseminated iron oxide in illite cement in bleached samples. A leaching experiment suggests that uranium may be more easily available for mobilization from rocks that have undergone bleaching alteration, making them potential U sources. In addition, bleached rocks form effective traps for U, V, and some Cu mineralization.

Colorado↗
USGS2026

Moment magnitude for small earthquakes in the Delaware basin of west Texas and southeast New Mexico, USA

The Delaware Basin region of west Texas and southeast New Mexico has become one of the most prolific regions of seismic activity in the continental United States due to widespread hydraulic fracturing and wastewater disposal injection. In response to the increased number of earthquakes in this region, rapid and accurate characterization of earthquake sources is necessary to understand the evolution of seismic activity and level of seismic hazard associated with these earthquakes. This study re-evaluates earthquake magnitudes, estimating moment magnitude (MW) for small earthquakes in the Delaware Basin using 1) moment-rate spectra derived from S-wave coda envelopes, and 2) a relative magnitude method that relies exclusively on the ratio of waveform amplitudes between highly correlated waveform pairs. The coda-envelope method produces accurate M W estimates for small earthquakes ( M 1.5 – 3) that are consistent with independent, waveform modeled moment magnitudes for events with M W > 3 . Using the relative amplitudes method to extend these M W magnitudes to many other events, we successfully provide relative moment magnitude ( M W,rel ) values for 81% of the Texas Seismological Network catalog in the Delaware Basin region, and 45% of the USGS Induced Seismicity Project’s catalog of events in southeast New Mexico. The adoption and integration of the calibrated M W,rel method with current magnitude estimation methods offers valuable insights into the relationships between local and moment magnitude and will contribute to improved characterization of widespread induced seismicity.

New Mexico, Texas↗
USGS2026

Background and geologic model for the 2024 U.S. Geological Survey assessment of undiscovered conventional petroleum resources in the Norphlet Formation, U.S. Gulf Coast

The Upper Jurassic Norphlet Formation is a stratigraphic unit located in the subsurface of the United States Gulf coastal plain and offshore Gulf of America (Gulf of Mexico). The Norphlet consists of clastic sediments derived from the southern Appalachian highlands, and was deposited in a continental dryland setting on the margins of the early Gulf of America rift basin. The formation contains a variety of sedimentary facies, including facies representing updip alluvial fans, wadis, red beds, and a widespread erg, or eolian sand sea. The erg facies form the primary reservoirs from which hydrocarbons sourced from the overlying Smackover Formation are produced. Development of the Norphlet began in earnest in the late 1960s, with new discoveries, including large fields at Flomaton, Hatters Pond, and Mobile Bay, continuing through the 2000s–2010s with the discovery of major oil fields in the offshore Desoto Canyon area. Onshore, Norphlet hydrocarbon traps typically are faulted salt anticlines, although many fields also have a stratigraphic trapping component because of the preservation of dune-scale bedforms. Thermal maturity across the Norphlet play varies significantly with depth, resulting in oil production transitioning downdip to natural gas liquids production, then dry gas production; production depths reach to greater than 21,000 feet. A 2024 U.S. Geological Survey assessment divided the Norphlet into four conventional assessment units defined by the type and frequency of trapping mechanisms, sedimentology, and thermal maturity of each area, with little potential for hydrocarbon development observed west of the Mississippi River. Although petroleum resources in the Norphlet were revised downward, it is probable that significant resources remain to be discovered.

Alabama, Florida, Mississippi↗
USGS2025

Sand provenance boundary in the Mu Us Sandy Land of northern China

Desert dunes are often assumed to have uniform mineral compositions due to extensive mixing during lateral transport, which complicates provenance studies. The Mu Us Sandy Land in north-central China, near the East Asian summer monsoon precipitation boundary, experiences a wetter climate than most deserts. Climate wetting as a result of a warming climate, and the ‘Sand Control Project’ implemented by the Chinese government to decrease the lateral movement of sand dunes in this area provide an opportunity to study surface processes of sand production and transport. Previous studies using zircon U Pb geochronology and heavy mineral composition indicate distinct sand sources for the Mu Us Sandy Land: local basement-derived middle Yellow River sediments and recycled dried-up lacustrine sediments for the eastern part, and northeastern Tibetan Plateau-derived upper Yellow River sediments for the western part. However, zircons and heavy minerals only represent trace amounts of the bulk mineralogy within a sand dune, so broader provenance analysis targeting common minerals is essential. We focus on the area near the proposed provenance difference boundary between the western and eastern Mu Us Sandy Land, using comprehensive sampling and provenance techniques to confirm distinct provenance characteristics and delineate the provenance boundary. Our findings reveal that sand from most of the Mu Us Sandy Land originated from the erosion of local basement by the middle Yellow River and recycled local dried-up lacustrine sediments, whereas the southwestern corner and the neighboring western-central Chinese Loess Plateau received sediments from the distal northeastern Tibetan Plateau.

Mu Us Sandy Land↗
USGS2025

Petrogenesis and mineralization potential of spinifex komatiitic basalts in the Bradley Peak greenstone terrane, Wyoming Province

Komatiitic volcanic rocks are important hosts of Ni sulfide mineralization and record early Earth evolution; however, those in the well-studied Archean Wyoming Province have received little attention. Here, we elucidate the timing and petrogenesis of the Bradley Peak komatiitic volcanic rocks using field and textural observations, geochronology, and geochemistry. Detrital and igneous zircon U-Pb ages for two samples from previously undated units support published age determinations, placing the eruption age at 2.72 Ga. Stratigraphy of the volcanic flows was mapped and 36 samples including cumulates, greenschists, and spinifex-textured rocks were collected. Whole-rock geochemistry was used to classify the spinifex-textured samples as Al-undepleted komatiitic basalts (11–17 wt% MgO). Platinum-group element concentrations (n = 25) are like those in global Al-undepleted komatiitic basalts, and PGE/Ti ratios do not indicate the volcanic flows likely host sulfide mineralization. Initial ε Nd values of −0.5 to +4.7 (n = 16), indicate that these lavas were derived from a depleted mantle source and have negligible evolved crust contamination. The primary magma to the komatiitic basalt flows is estimated to have had 19 wt% MgO and be derived from ∼15 to 25 % mantle partial melting at 3–4 GPa. Trace element chemistry and thermodynamic modeling suggest the primary melt assimilated local banded iron formation. Although the Bradley Peak komatiitic basalts do not contain positive evidence of magmatic sulfide deposits, depleted Au in the flows suggests they could be source rocks for nearby orogenic gold deposits.

Wyoming↗
USGS2023

Hydrogeology, karst, and groundwater availability of Monroe County, West Virginia

Monroe County is in southeastern West Virginia, encompassing an area of 474 square miles. The area consists of karst and siliciclastic aquifers of Ordovician, Silurian, Devonian, and Mississippian age and is in parts of two physiographic provinces: the Valley and Ridge Province to the east of Peters Mountain, and the Appalachian Plateau Province to the west of Peters Mountain. This study was developed in response to inquiries from the Monroe County Commission requesting assessment of the water resources of the county to better understand the quantity of the county’s groundwater resources, for both current [2023] and future demand, and to provide information to support protection and management of the county’s valuable groundwater resources. Various products were developed for this study that provide knowledge with respect to water availability and contamination susceptibility of the karst aquifers within the county. U.S. Geological Survey (USGS) geologists conducted extensive geologic mapping in support of the project, producing (1) a countywide bedrock geologic map, (2) a countywide hydrogeologic map, and (3) a light detection and ranging (lidar)-derived countywide digital elevation model and associated sinkhole map. A significant part of this work was to map in detail the Greenbrier Group at the formation level, which prior to this study had only partially been completed. The report also includes (4) a description of the lithologic units identified as part of the geologic mapping process. U.S. Geological Survey hydrologists completed several additional products for the hydrology part of the effort, including development of (1) a countywide potentiometric surface (water-table) map, (2) a countywide base-flow stream assessment, (3) countywide water-budget estimates, (4) well log surveys for 15 wells to better understand subsurface controls on groundwater flow within the study area, (5) two groundwater tracer tests to better refine the groundwater divide from the northern and southern parts of the karst aquifer in Monroe County; and finally, based on all available data collected for the study including the potentiometric surface map, geologic map, current [2023] and legacy fluorometric groundwater tracer tests, and base-flow stream assessments, (6) groundwater-basin delineations were reassessed for principal groundwater basins within the Greenbrier aquifer. In Monroe County, four principal hydrogeologic settings produce large yields of water for residential, agricultural, and other uses. The most relied upon water-bearing zone with respect to current [2023] public water supply is from springs along Peters Mountain. These springs are derived from intervals of fractured sandstone and resultant alluvial deposits. Groundwater flows downslope through these permeable alluvial deposits and discharges at the contact with less permeable strata, such as the Reedsville Shale. The second most relied upon water-bearing zone in Monroe County is within the karstic Greenbrier Group aquifer, in which the basal Hillsdale Limestone overlies the less permeable Maccrady Shale. This geologic contact between the Hillsdale Limestone and Maccrady Shale is not only targeted as a source of water for agricultural supply but also is targeted as a source of water for residential supply. The third most relied upon water-bearing zone is composed of shallow perched aquifers within the Greenbrier Group. The discontinuous nature of these perched aquifers makes mapping their extent impossible, but they are related to permeable geologic strata, such as karstified limestones with solutionally enhanced permeability that overlies less permeable shale or chert bedrock. During geologic mapping of the county, several of these perched aquifers were documented in the Pickaway, Union, and Alderson Limestones. A fourth zone consists of springs from Ordovician carbonates at the base of Peters Mountain, which are influenced by sinking streams as well as upwelling along faults. In terms of water quantity, the most sustainable springs are those having deeper-sourced flows. Public supplies are a principal source of water used for residential and commercial supply in the region, accounting for 0.49 million gallons per day (Mgal/d) of fresh-water withdrawals (0.14 Mgal/d of groundwater and 0.35 Mgal/d of surface water) for residential and commercial use and serving 6,645 individuals (49.2 percent of the population). An estimated 6,861 people, (50.8 percent of the population) primarily rely on private wells or other unregulated sources, such as springs, and withdraw 0.55 Mgal/d of groundwater for their residential use. Public water supply in the region is primarily (71.4 percent) derived from springs and augmented by stream withdrawals (backup sources mainly during low-flow periods), with the remaining portion (28.6 percent) derived from groundwater withdrawals from wells. For rural residents, however, 100 percent of their withdrawals are derived from groundwater (wells or springs).

West Virginia↗