Geology ReportsSearch

SEARCH · Geology Reports

Results for “Studies in Maine Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

The Geologic Story of the Uinta Mountains

The opening of the West after the Civil War greatly stimulated early geologic exploration west of the 100th Meridian. One of the areas first studied, the Uinta Mountains region, gained wide attention as a result of the explorations of three Territorial Surveys, one headed by John Wesley Powell, one by Clarence King, and one by Ferdinand V. Hayden. Completion of the Union Pacific Railroad across southern Wyoming 100 years ago, in 1869, materially assisted geologic exploration, and the railheads at Green River and Rock Springs greatly simplified the outfitting of expeditions into the mountains. The overlap of the Powell, King, and Hayden surveys in the Uinta Mountains led to efforts that were less concerted than competitive and not without acrimony. Many parts of the area were seen by all three parties at almost the same time. Duplication was inevitable, of course, but all three surveys contributed vast quantities of new knowledge to the storehouse of geology, and many now-basic concepts arose from their observations. Powell's area of interest extended mainly southward from the Uinta Mountains to the Grand Canyon, including the boundless plateaus and canyons of southern Utah and northern Arizona. King's survey extended eastward from the High Sierra in California to Cheyenne, Wyoming, and encompassed a swath of country more than 100 miles wide. Hayden's explorations covered an immense region of mountains and basins from Yellowstone Park in Wyoming southeast throughout most of Colorado. Powell first entered the Uinta Mountains in the fall of 1868, having traveled north around the east end of the range from the White River country to Green River, Wyoming, then south over a circuitous route to Flaming Gorge and Browns Park, and finally back to the White River, where he spent the winter. In 1869, after reexamining much of the area visited the previous season, Powell embarked on his famous 'first boat trip' down the Green and Colorado Rivers. This trip was more exploratory than scientific; his second, more scientific trip was made 2 years later. Powell revisited the Uinta Mountains in 1874 and 1875 to complete the studies begun 6 years earlier. His classic 'Report on the Geology of the Eastern Portion of the Uinta Mountains and a Region of Country Adjacent Thereto' was published in 1876. King's survey?officially 'The United States Geological Exploration of the Fortieth Parallel'?is better known simply as the '40th Parallel Survey.' King began working eastward from California in 1867. The Uinta Mountains region, however, was mapped by S. F. Emmons, under the supervision of King, in the summers of 1869 and 1871. Emmons' work was monumental, and although he emphasized in his letter of transmittal to King the exploratory nature of the work?as the formal title of the report indicates?his maps, descriptions, and conclusions reflect a comprehensive understanding of the country and its rocks. The 40th Parallel report contains the best, most complete early descriptions of the Uinta Mountains. It, indeed, is a treasurechest of information and a landmark contribution to the emerging science of geology. Hayden visited the Uinta Mountains in 1870, descending the valley of Henrys Fork to Flaming Gorge in the fall after having earlier examined the higher part of the range to the west. Most of Hayden's observations were cursory, and he repeatedly expressed regret at having insufficient time for more detailed studies. In reference to the area between Clay Basin and Browns Park, he remarked (Hayden, 1871, p. 67) somewhat dryly that 'the geology of this portion of the Uinta range is very complicated and interesting. To have solved the problem to my entire satisfaction would have required a week or two.' Eighty-odd years later I spent several months there?looking at the same rocks. Powell was perhaps more creative?more intuitive?than either King or Hayden, and his breadth of interest in the fields of geology, physiography, ethnology, an

Bulletin

Passive margins: U.S. Geological Survey Line 19 across the Georges Bank basin

Georges Bank is a shallow part of the Atlantic continental shelf southeast of New England (Emery and Uchupi, 1972, 1984). This bank, however, is merely the upper surface of several sedimentary basins overlying a block-faulted basement of igneous and metamorphic crystalline rock. Sedimentary rock forms a seaward-thickening cover that has accumulated in one main depocenter and several ancillary depressions, adjacent to shallow basement platforms of paleozoic and older crystalline rock. Georges Bank basin contains a thickness of sedimentary rock greater than 10 km, whereas the basement platforms that flank the basin are areas of thin sediment accumulation (less than 5 km).

AAPG Studies in Geology

The Hayes tephra deposits, and upper Holocene marker horizon in south-central Alaska

The most widespread of all Holocene tephra deposits in the Cook Inlet region of south-central Alaska is a set of deposits from Hayes volcano. Because of their unique phenocryst content-biotite in rare amounts and a high proportion of amphibole to pyroxene-the deposits are readily identifiable at all but the most distant sites where they are very fine grained. Eighteen radiocarbon dates from eight upland sites limit the age of the tephra set to between about 3500 and 3800 yr. The set originated at Hayes volcano in the Tordrillo Mountains 150 km northwest of Anchorage; seven or possibly eight closely succeeding deposits, low-silica dacite in composition, compose two main lobes that extend northeast for 400 km and south for at least 250 km from the vent. We estimate the total tephra volume to be 10 km3; multiple layers imply four to six larger and two or three smaller eruptions. The deposits are a nearly isochronous marker horizon that should be useful in future archeologic, geologic, and palynologic studies in the region. ?? 1990.

Quaternary Research

Diagrammatic restored section of the Inyan Kara group, Morrison formation, and Unkpapa sandstone of the western side of the Black Hills, Wyoming and South Dakota

The Inyan Kara group of Early Cretaceous age and the underlying Morrison formation and Unkpapa sandstone of Late Jurassic age comprise about 300 to 850 feet of gently dipping predominantly nonmarine rocks that crop out along the flanks of the Black Hills in northeastern Wyoming and western South Dakota. Detailed mapping and stratigraphic studies of these rocks were made from 1952 to 1957 by the U.S. Geological Survey on behalf of the Division of Raw Materials of the U.S. Atomic Energy Commission. One of the results of the studies is a correlation of formational and intraformational units along the western side of the Black Hills for a distance of about 140 miles. The generalized section above, which has a greatly exaggerated vertical scale, shows the main lithologic units that have been traced and correlated, and the stratigraphic position of uranium deposits in various parts of the Black Hills in relation to these units. Geologists who have contributed to the diagrammatic section are listed on another part of this sheet and the areas for which each is responsible are shown on the accompanying map. The brief text below summarizes some of the broad stratigraphic relations within the Inyan Kara group and underlying formations.

South Dakota, Wyoming

Simulated and observed 2010 flood-water elevations in selected river reaches in the Moshassuck and Woonasquatucket River Basins, Rhode Island

Heavy persistent rains from late February through March 2010 caused severe flooding and set, or nearly set, peaks of record for streamflows and water levels at many long-term U.S. Geological Survey streamgages in Rhode Island. In response to this flood, hydraulic models were updated for selected reaches covering about 33 river miles in Moshassuck and Woonasquatucket River Basins from the most recent approved Federal Emergency Management Agency flood insurance study (FIS) to simulate water-surface elevations (WSEs) from specified flows and boundary conditions. Reaches modeled include the main stem of the Moshassuck River and its main tributary, the West River, and three tributaries to the West River—Upper Canada Brook, Lincoln Downs Brook, and East Branch West River; and the main stem of the Woonasquatucket River. All the hydraulic models were updated to Hydrologic Engineering Center-River Analysis System (HEC-RAS) version 4.1.0 and incorporate new field-survey data at structures, high-resolution land-surface elevation data, and flood flows from a related study. The models were used to simulate steady-state WSEs at the 1- and 2-percent annual exceedance probability (AEP) flows, which is the estimated AEP of the 2010 flood in the Moshassuck River Basin and the Woonasquatucket River, respectively. The simulated WSEs were compared to the high-water mark (HWM) elevation data obtained in these basins in a related study following the March–April 2010 flood, which included 18 HWMs along the Moshassuck River and 45 HWMs along the Woonasquatucket River. Differences between the 2010 HWMs and the simulated 2- and 1-percent AEP WSEs from the FISs and the updated models developed in this study varied along the reach. Most differences could be attributed to the magnitude of the 2- and 1-percent AEP flows used in the FIS and updated model flows. Overall, the updated model and the FIS WSEs were not appreciably different when compared to the observed 2010 HWMs along the Woonasquatucket and Moshassuck Rivers.

Rhode Island

Field-trip guide to the vents, dikes, stratigraphy, and structure of the Columbia River Basalt Group, eastern Oregon and southeastern Washington

The Columbia River Basalt Group covers an area of more than 210,000 km 2 with an estimated volume of 210,000 km 3 . As the youngest continental flood-basalt province on Earth (16.7–5.5 Ma), it is well preserved, with a coherent and detailed stratigraphy exposed in the deep canyonlands of eastern Oregon and southeastern Washington. The Columbia River flood-basalt province is often cited as a model for the study of similar provinces worldwide. This field-trip guide explores the main source region of the Columbia River Basalt Group and is written for trip participants attending the 2017 International Association of Volcanology and Chemistry of the Earth’s Interior (IAVCEI) Scientific Assembly in Portland, Oregon, USA. The first part of the guide provides an overview of the geologic features common in the Columbia River flood-basalt province and the stratigraphic terminology used in the Columbia River Basalt Group. The accompanying road log examines the stratigraphic evolution, eruption history, and structure of the province through a field examination of the lavas, dikes, and pyroclastic rocks of the Columbia River Basalt Group.

Oregon, Washington

Time of travel, water quality, and bed-material quality in the Cuyahoga River within the Cuyahoga Valley National Recreation area, Ohio

Three studies were conducted in the Cuyahoga Valley National Recreation by the U. S. Geological Survey to (1) establish the relationship between time of travel and discharge through the park reach of the Cuyahoga River, (2) characterize water quality of the Cuyahoga River within the park over a 24-hour period, and (3) determine general areas where the streambed might be contaminated by trace metals. Time of Travel between Botzum and Independence is described by the equation T = 46.9-0.038Q, where T = time, in hours, and Q = discharge at Independence, in cubic feet per second. On the main stem of the Cuyahoga River, dissolved-oxygen saturation was highest and ultimate carbonaceous biochemical oxygen demand was lowest on the upstream and downstream ends of the reach. Dissolved-oxygen saturation was more than 80 percent in all the tributaries except Furnace Run, Brandywine Creek, and Langes Run. The number of fecal coliform counts per 100 milliliters of sample was high throughout the study area and ranged from 38 to 1,200,000. Concentrations of all metals and non-metals investigated by means of analysis of bed material were not anomalously high. (USGS)

Water-Resources Investigations Report

Two-event lode-ore deposition at Butte, USA: 40Ar/39Ar and U-Pb documentation of Ag-Au-polymetallic lodes overprinted by younger stockwork Cu-Mo ores and penecontemporaneous Cu lodes

The ore-genesis model for world-class deposits of the Butte mining district, Montana, USA, is deep pre-Main Stage porphyry Cu-Mo and overlying Main Stage Ag-Zn-Cu zoned-lode deposits, both of which formed from hydrothermal fluids driven by minor volumes of rhyolitic magma. The lode-specific model is that hydrothermal processes diminished in intensity outward from district center along lode veins, synchronously forming metal zones. The accepted models are controverted by new geologic and multi-method geochronologic studies. The new data reveal the following sequence of events: (1) Thermal study of country rock indicates that the 76.9-Ma Butte Granite cooled to 350–400 °C by 4 m.y. after emplacement. (2) Five quartz porphyry rhyolite dikes were emplaced at 67–65 Ma and another at 60 Ma (SHRIMP U-Pb) into the cooled Butte Granite without resetting 40 Ar/ 39 Ar ages in country rock. (3) Fifty-eight white mica and K-feldspar samples from alteration envelopes adjacent to Ag-Au-polymetallic lodes in outer parts of the district, Zn-rich lodes in intermediate parts, and Cu-rich lodes in the district center yield 40 Ar/ 39 Ar ages of 73–70 Ma for Ag-rich lodes, 65–64 Ma for Cu-rich lodes, and complex age spectra of 69–65 Ma for Zn-rich lodes. The data show that Ag-Au-polymetallic lodes occupied cross-district fractures by about 73 Ma, forming the greater Butte mining district. At 67–65 Ma, minor quartz porphyry dikes were emplaced into central and eastern parts of the rejuvenated fracture system but without evidence of related cupola or volcanic rocks or of thermal disturbance in the country rock. At 64.5 Ma, overlapping hydrothermal cells formed two stockwork Cu-Mo domes in deep parts of the fracture system. At 65–64 Ma and closely related to late-stage stockwork Cu-Mo activity, a penecontemporaneous hydrothermal pulse formed a high-sulfidation hydrothermal plume that (1) utilized the large re-opened fractures to cannibalize and remobilize Cu from autologous, stockwork, and older Ag-Au-polymetallic lodes, (2) deposited the rich, high-sulfidation Cu lodes, and (3) mobilized metals from early Ag-Au-polymetallic veins in middle parts of the district, transported the metals outward and redeposited them, enriching early veins, especially in the intermediate Zn plus Cu areas. Metals zones in lodes of the Butte district are the result of an intensely focused, Cu-rich hydrothermal plume that variably reworked the center of significantly larger, 10 m.y. older, Ag-Au-polymetallic lodes.

Montana

Pb-Sr-Nd-O isotopic characterization of Mesozoic rocks throughout the northern end of the Peninsular Ranges batholith: Isotopic evidence for the magmatic evolution of oceanic arc–continental margin accretion during the Late Cretaceous of southern California

Within the duration of the U.S. Geological Survey (USGS)–based Southern California Areal Mapping Project (SCAMP), many samples from the northern Peninsular Ranges batholith were studied for their whole-rock radioisotopic systematics (rubidium-strontium [Rb-Sr], uranium-thorium-lead [U-Th-Pb], and samarium-neodymium [Sm-Nd]), as well as oxygen (O), a stable isotope. The results of three main studies are presented separately, but here we combine them (>400 analyses) to produce a very complete Pb-Sr-Nd-O isotopic profile of an arc-continent collisional zone—perhaps the most complete in the world. In addition, because many of these samples have U-Pb zircon as well as argon mineral age determinations, we have good control of the timing for Pb-Sr-Nd-O isotopic variations. The ages and isotopic variations help to delineate at least four zones across the batholith from west to east—an older western zone (126–108 Ma), a transitional zone (111–93 Ma), an eastern zone (94–91 Ma), and a much younger allochthonous thrust sheet (ca. 84 Ma), which is the upper plate of the Eastern Peninsular Ranges mylonite zone. Average initial 87 Sr/ 86 Sr (Sr i ), initial 206 Pb/ 204 Pb ( 206 Pb i ), initial 208 Pb/ 204 Pb (average 208 Pb i ), initial epsilon Nd (average ε Ndi ), and δ 18 O signatures range from 0.704, 18.787, 38.445, +3.1, and 4.0‰–9.0‰, respectively, in the westernmost zone, to 0.7071, 19.199, 38.777, −5, and 9‰–12‰, respectively, in the easternmost zone. The older western zone is therefore the more chemically and isotopically juvenile, characterized mostly by values that are slightly displaced from a mantle array at ca. 115 Ma, and similar to some modern island-arc signatures. In contrast, the isotopic signatures in the eastern zones indicate significant amounts of crustal involvement in the magmatic plumbing of those plutons. These isotopic signatures confirm previously published results that interpreted the Peninsular Ranges batholith as a progressively contaminated magmatic arc. The Peninsular Ranges batholith magmatic arc was initially an oceanic arc built on Panthalassan lithosphere that eventually evolved into a continental margin magmatic arc collision zone, eventually overriding North American cratonic lithosphere. Our Pb-Sr-Nd data further suggest that the western arc rocks represent a nearshore or inboard oceanic arc, as they exhibit isotopic signatures that are more enriched than typical mid-ocean-ridge basalt (MORB). Isotopic signatures from the central zone are transitional and indicate that enriched crustal magma sources were becoming involved in the northern Peninsular Ranges batholith magmatic plumbing. As the oceanic arc–continental margin collision progressed, a mixture of oceanic mantle and continental magmatic sources transpired. Magmatic production in the northern Peninsular Ranges batholith moved eastward and continued to tap enriched crustal magmatic sources. Similar modeling has been previously proposed for two other western margin magmatic arcs, the Sierra Nevada batholith of central California and the Idaho batholith. Calculated initial Nd signatures at ca. 100 Ma for Permian–Jurassic and Proterozoic basement rocks from the nearby San Gabriel Mountains and possible source areas along the southwestern Laurentian margin of southern California, southwestern Arizona, and northern Sonora strongly suggest their involvement with deep crustal magma mixing beneath the eastern zones of the Peninsular Ranges batholith, as well as farther east in continental lithospheric zones. Last, several samples from the allochthonous, easternmost upper-plate zone, which are considerably younger (ca. 84 Ma) than any of the rocks from the northern Peninsular Ranges batholith proper, have even more enriched average Sr i , 206 Pb i , 208 Pb i , and ε Ndi signatures of 0.7079, 19.344, 38.881, and −6.6, respectively, indicative of the most-evolved magma sources in the northern Peninsular Ranges batholith and similar to radioisotopic values for rocks from the nearby Transverse Ranges, suggesting a genetic connection between the two.

Book chapter

Geophysical bed sediment characterization of the Androscoggin River from the former Chlor-Alkali Facility Superfund Site, Berlin, New Hampshire, to the state border with Maine, August 2009

The former Chlor-Alkali Facility in Berlin, New Hampshire, was listed on the U.S. Environmental Protection Agency National Priorities List in 2005 as a Superfund site. The Chlor-Alkali Facility lies on the east bank of the Androscoggin River. Elemental mercury currently discharges from that bank into the Androscoggin River. The nature, extent, and the speciation of mercury and the production of methyl mercury contamination in the adjacent Androscoggin River is the subject of continuing investigations. The U.S. Geological Survey, in cooperation with Region I of the U.S. Environmental Protection Agency, used geophysical methods to determine the distribution, thickness, and physical properties of sediments in the Androscoggin River channel at a small area of an upstream reference reach and downstream from the site to the New Hampshire–Maine State border. Separate reaches of the Androscoggin River in the study area were surveyed with surface geophysical methods including ground-penetrating radar and step-frequency electromagnetics. Results were processed to assess sediment characteristics including grain size, electrical conductivity, and pore-water specific conductance. Specific conductance measured during surface- and pore-water sampling was used to help interpret the results of the geophysical surveys. The electrical resistivity of sediment samples was measured in the laboratory with intact pore water for comparison with survey results. In some instances, anthropogenic features and land uses, such as roads and power lines affected the detection of riverbed properties using geophysical methods; when this occurred, the data were removed. Through combining results, detailed riverbed sediment characterizations were made. Results from ground-penetrating radar surveys were used to image and measure the depth to the riverbed, depth to buried riverbeds, riverbed thickness and to interpret material-type variations in terms of relative grain size. Fifty two percent of the riverbed in the study area was covered with gravel and finer sediments. The electrically resistive river water and sediment in this study area were conducive to the penetration of the ground-penetrating radar and step-frequency electromagnetic signals and allowed for effective sediment characterization by geophysical methods. The reach between the former Chlor-Alkali Facility and the Riverside Dam, had small areas of fine sediment (estimated 11 percent of riverbed area), found on the upstream left bank and the downstream right bank, with an electromagnetic conductivity (31.4 millisiemens per meter (mS/m) maximum) that was higher than the upstream reference reach. The greatest electromagnetic conductivity (195 mS/m), pore-water specific conductance (324 mS/m) and lab measured sediment conductivity of (76.8 mS/m, measured with a direct-current resistivity test box) in the study were measured approximately 1 mile (mi) downstream of the site from a sandbar on the left bank. Reaches adjacent to and within 2 mi downstream from the site had elevated electromagnetic conductivity despite having lower estimated percentages of riverbed area covered in sediment (11, 25, and 61 percent, respectively) than the reference reach (97). Typically finer grained sediment with similar mineralogy will be more conductive. The Shelburne Reservoir is approximately 8 mi downstream from the site had the second greatest pore-water specific conductance measured, 45.8 mS/m. Many of the locations with the largest step-frequency electromagnetic values have not been sampled for pore water and sediment.

New Hampshire

Aquatic biological communities and associated habitats at selected sites in the Big Wood River Watershed, south-central Idaho, 2014

Assessments of streamflow (discharge) parameters, water quality, physical habitat, and biological communities were completed between May and September 2014 as part of a monitoring program in the Big Wood River watershed of south-central Idaho. The sampling was conducted by the U.S. Geological Survey in cooperation with Blaine County, Trout Unlimited, the Nature Conservancy, and the Wood River Land Trust to help identify the status of aquatic resources at selected locations in the watershed. Information in this report provides a basis with which to evaluate and monitor the long-term health of the Big Wood River and its major tributaries. Sampling sites were co-located with existing U.S. Geological Survey streamgaging stations: three on the main stem Big Wood River and four on the North Fork Big Wood River (North Fork), Warm Springs Creek (Warm Sp), Trail Creek (Trail Ck), and East Fork Big Wood River (East Fork) tributaries. The analytical results and quality-assurance information for water quality, physical habitat, and biological community samples collected at study sites during 2 weeks in September 2014 are summarized. Water-quality data include concentrations of major nutrients, suspended sediment, dissolved oxygen, and fecal-coliform bacteria. To assess the potential effects of nutrient enrichment on algal growth, concentrations of periphyton biomass (chlorophyll- a and ash free dry weight) in riffle habitats were determined at each site. Physical habitat parameters include stream channel morphology, habitat volume, instream structure, substrate composition, and riparian vegetative cover. Biological data include taxa richness, abundance, and stream-health indicator metrics for macroinvertebrate and fish communities. Statistical summaries of the water-quality, habitat, and biological data are provided along with discussion of how these findings relate to the health of aquatic resources in the Big Wood River watershed. Seasonal discharge patterns using statistical summaries of daily discharge from selected sites are reported for water years 2012–15. Results showed that annual average daily mean discharge increased from the Big Wood River near Ketchum, ID (BW Ketchum) downstream to the Big Wood River at Hailey, ID (BW Hailey), but decreased by nearly 50 percent from BW Hailey downstream to Big Wood River at Stanton Crossing near Bellevue, ID (BW Stanton). Annual variability in daily mean discharge among main-stem sites was highest at BW Stanton, suggesting that this part of the river may be subject to some level of flow alteration. Hydrologic alterations resulting in flow reduction can contribute to higher water temperature, especially during the summer months when conditions are often most stressful to fish and other stream organisms. Daily water temperature and water temperature trends from June to September 2014 are reported for select tributary and main-stem sites on the Big Wood River and can be used to assess the potential for biological impairment based on aquatic life temperature criteria for cold-water streams. The State of Idaho maximum temperature criteria for protection of cold-water aquatic life of 22 °C was exceeded at Warm Sp and BW Stanton during summer 2014, but at none of the other main-stem or tributary sites. The 13 °C critical temperature criterion for salmonid spawning was exceeded in early July 2014 at BW Ketchum and BW Hailey near the end of the rainbow trout critical spawning and rearing period. Temperature exceedances were most frequent at BW Stanton, where exceedances for rainbow trout and brown trout occurred from May through early July 2014 during most of the critical spawning and rearing period. Water quality and habitat availability did not seem to be limiting for fish or other aquatic organisms at most sites in the Big Wood River watershed. Water quality assessments in September 2014 determined no exceedances of total maximum daily load target levels. The availability and quality of habitat was limited at BW Stanton, where shallow-water habitat conditions prevailed. Macroinvertebrate community diversity was high at all sites except for BW Stanton, where low community diversity was attributed to low species richness and high abundances of a few tolerant taxa. Presence of low species diversity and high macroinvertebrate tolerance values at BW Stanton indicates that benthic community condition and stream health were reduced at that location. Fish surveys done in September 2014 did not indicate any significant reductions in native fish communities in the Big Wood River or its tributaries. Native rainbow trout ( Oncorhynchus mykiss ) and Wood River sculpin ( Cottus leiopomus ) were the dominant fish species in the drainage and were found at all tributary and main-stem sites. Non-native brown ( Salmo trutta ) and brook trout ( Salvelinus fontinalis ) were limited to lower drainage sites on the Big Wood River (BW Hailey and BW Stanton), and occurred in relatively low numbers.

Idaho

Vertical movements of ocean island volcanoes: Insights from a stationary plate environment

Uplift reconstructions based on the Cape Verde's geological record provide a unique opportunity to study the long-term isostatic movements associated with hotspot activity on a stationary plate environment. The archipelago is considered stationary with respect to its melting source so the hotspot-driven isostatic effects affecting the ocean islands are expected to be enhanced. In this study, Ar–Ar and U–Th geochronology techniques were used to date a set of palaeo-markers of sea-level from Santiago's and São Nicolau's edifices, two of the main Cape Verde Islands. A comparison between relative sea-level and eustatic sea-level (from a modern eustatic curve) was established to extract the vertical displacement undergone by the markers, and to reconstruct the uplift/subsidence history of each island. The resulting uplift reconstructions confirm that both Santiago and São Nicolau experienced a general uplift trend over the last 6 Ma, seemingly synchronous with the vigorous volcanic activity that built their exposed edifices. These islands, however, exhibit different uplift histories despite their common uplift trend. Several uplift mechanisms were tested and a local rather than regional mechanism is proposed as the main cause of uplift, generally unrelated with far-field effects of surface loading. This mechanism is probably associated with magmatic additions at crustal level.

Cape Verde Archipelago

Quantifying effects of climate change on the snowmelt-dominated groundwater resources of northern New England

Recent U.S. Geological Survey (USGS) climate studies in New England have shown substantial evidence of hydrologic changes during the last 100 years, including trends toward earlier snowmelt runoff, decreasing occurrence of river ice, and decreasing winter snowpack. These studies are being expanded to include investigation of trends in groundwater levels and fluctuations. Groundwater is an important drinking-water source throughout northern New England (Maine, New Hampshire, and Vermont). The USGS is currently investigating whether or not groundwater recharge from snowmelt and precipitation exhibits historical trends. In addition to trend-testing, groundwater resources also will be analyzed by relating groundwater-level changes to the large year-to-year variability in weather conditions. Introduction The USGS has documented many seasonal climate-related changes in the northeastern United States that have occurred during the last 30 to 150 years. These changes include earlier snowmelt runoff in the late winter and early spring, decreasing duration of ice on rivers and lakes, decreasing ratio of snowfall to total precipitation, and denser and thinner late-winter snowpack. All of these changes are consistent with warming winter and spring air temperatures (Dudley and Hodgkins, 2002; Hodgkins and others, 2002; Huntington and others, 2004; Hodgkins and others, 2005; Hodgkins and Dudley, 2006a; Hodgkins and Dudley, 2006b). Climate-model projections for the Northeast indicate air-temperature warming, earlier snowmelt runoff, increases in annual evaporation, and decreased low streamflows (Hayhoe and others, 2007). The contribution and timing of spring snowmelt to groundwater recharge is particularly important to groundwater resources in the northeastern United States where aquifers typically consist of thin sediments overlying crystalline bedrock with relatively little storage capacity (Mack, 2009). Following spring recharge, groundwater slowly flows into streams throughout the summer. This groundwater flow is a source of cool water during the summer and accounts for a large proportion of the streamflow during summer low-flow periods. Groundwater is an important drinking-water source in northern New England. Approximately 32 percent of public water suppliers draw water from groundwater sources in Vermont, New Hampshire, and Maine, and approximately 40 percent of the population derives its drinking water from private wells (Kenny and others, 2009). It is vital to understand changes that may be occurring to such an important resource for planning industrial and agricultural water uses and protecting drinking water.

Fact Sheet

Suspended-sediment budget for the Kankakee River Basin, 1993-95

A suspended-sediment budget was constructed for the Kankakee River Basin using suspended-sediment data collected from January 1993 through December 1995 at six existing U.S. Geological Survey streamflow-gaging stations. The Iroquois River delivered almost twice as much suspended-sediment load to the Kankakee River main stem as did the Kankakee River above its junction with the Iroquois River. For the Iroquois River, the portion of the drainage area in Illinois contributed 86 percent of the total suspended-sediment load measured during the study. In contrast, for the Kankakee River upstream from the junction with the Iroquois, the portion of the drainage area in Illinois contributed only 17 percent of the total suspended-sediment load measured during the study. A net increase in total suspended-sediment load of 659,000 tons was measured in the main stem Kankakee River from the mouth of the Iroquois River to the streamflow-gaging station at Wilmington, Ill. This portion of the Kankakee River drainage had the highest suspended-sediment yield at 861 tons per day per square mile.

Illinois, Indiana

Hydraulic Analyses of Sni-A-Bar Creek and Selected Tributaries at Grain Valley, Jackson County, Missouri

A study was done by the U.S. Geological Survey, in cooperation with the city of Grain Valley, Jackson County, Missouri, to simulate the hydraulic characteristics of Sni-A-Bar Creek and selected tributaries within the corporate limits. The 10-, 50-, 100-, and 500-year recurrence interval streamflows were simulated to determine potential backwater effects on the Sni-A-Bar Creek main stem and to delineate flood-plain boundaries on the tributaries. The water-surface profiles through the bridge structures within the model area indicated that backwater effects from the constrictions were not substantial. The water-surface profile of Sni-A-Bar Creek generated from the one- and two-dimensional models indicated that the Gateway Western Railroad structure provided the greatest amount of contraction of flow within the modeled area. The results at the location of the upstream face of the railroad structure indicated a change in water-surface elevation from 0.2 to 0.8 foot (corresponding to simulated 10-year and 500-year flood occurrences). Results from all analyses indicated minimal backwater effects as a result of an overall minimal energy grade line slope and velocity head along Sni-A-Bar Creek. The flood plains for the 100-year recurrence interval floods on the Sni-A-Bar tributaries were mapped to show the extent of inundated areas. The updated flooding characteristics will allow city managers to contrast changes in flood risk and zoning as determined through the National Flood Insurance Program.

Scientific Investigations Report

Polychlorinated biphenyls in aquatic invertebrates and fish and observations about nitrogen and carbon isotope composition in relation to trophic structure and bioaccumulation patterns, Lake Worth and Meandering Road Creek, Fort Worth, Texas, 2007-08

During 2007-08 the U.S. Geological Survey, in cooperation with the U.S. Air Force, evaluated the concentration of polychlorinated biphenyls (PCBs) in aquatic invertebrates and fish from one site in the main body of Lake Worth, two sites in a small inlet in Lake Worth (upper and lower Woods Inlet), and one site in Meandering Road Creek in Fort Worth, Texas. The four sites sampled during 2007-08 were located at or near sites where surficial bed-sediment samples had been collected and analyzed for PCBs during previous U.S. Geological Survey studies so that PCB concentrations in aquatic invertebrates and fish and PCB concentrations in surficial bed-sediment samples could be compared. Stable nitrogen and carbon isotopes were used to help assess differences in the amount of these isotopes by species and sampling location. The sum of 15 PCB-congener concentrations was highest for aquatic invertebrates and fish from the upper Woods Inlet site and lowest for the same aquatic invertebrates and fish from Lake Worth site, where PCBs historically had not been detected in lake bed sediment. An increase in the ratio of the heavier nitrogen-15 (15N) isotope to the lighter nitrogen-14 (14N) isotope, referred to as enrichment of 15N, was highest in largemouth bass (representing the highest trophic level sampled) at all sites and lowest for true midge larvae inhabiting surficial bed sediment in the lake (representing the lowest trophic level sampled). Enrichment of 15N was less variable in largemouth bass and other fish from the highest trophic level compared with shorter lived, primary consumer invertebrates from lower trophic levels, such as true midge larvae, mayfly nymphs, and zooplankton. The delta carbon-13 (delta13C) values measured in true midge larvae collected at the Lake Worth and upper and lower Woods Inlet sites were more negative compared with the delta13C values measured for all other taxa, indicating true midge larvae were more depleted of carbon-13 (13C) compared with all other aquatic invertebrate and fish. The relative depletion of 13C might indicate the carbon sources consumed by true midge larvae are different from the carbon sources consumed by all other taxon that were sampled. Ratios of stable nitrogen isotopes nitrogen-15 to nitrogen-14 (delta15N) were similar between taxa from the Lake Worth site and Woods Inlet sites. The sum of 15 PCB-congener concentrations, however, was an order of magnitude higher in largemouth bass from the upper Woods Inlet site, indicating that PCB-congener concentrations in lake bed sediment likely controls biomagnification within the lake because of the similarities in trophic structure of the resident aquatic community. The biota at the Lake Worth reference site, where PCBs were not detected in the surficial sediment during previous studies, were less contaminated than the biota at sites where PCBs had been detected in the surficial sediment. The highest trophic-level consumers (as evidenced by the most 15N-enriched delta15N values) showed the maximum bioaccumulation.

Lake Worth

Hydrology of coal-resource areas in the southern Wasatch Plateau, central Utah

The study defines the surface and groundwater hydrology of coal-resources areas in the Southern Wasatch Plateau in Central Utah and, where possible, predicts the hydrologic impacts of underground mining. Discharge data at four streamflow gaging stations indicated that from 5 to 29% of the average annual precipitation on a drainage runs off streams, mainly during the snowmelt period (spring and summer). Most of the base flow of streams originates as spring discharge in the higher altitudes of drainages. Peak flows, average 7-day flood flows, and flood depths were related to basin characteristics in order to develop flood equations for ungaged sites. Chemical quality of surface water was suitable for most uses. Dissolved-solids concentrations ranged from 97 to 835 milligrams per liter in 61 samples collected throughout the area. Data from wells and coal-test holes, and a comprehensive spring inventory indicate that groundwater occurs in all geologic units exposed in the study area. The coal-bearing Blackhawk Formation and underlying Star Point Sandstone are saturated in most areas. Some future mining operations would require dewatering of the Star Point-Blackhawk aquifer. Most of the springs issue from the Flagstaff Limestone and North Horn Formation above the Star Point-Blackhawk aquifer. It is not known whether water in the Flagstaff and North Horn is perched. Dissolved-solids concentrations in groundwater ranged from 105 to 1,080 milligrams per liter in 87 analyzed samples. Water levels in wells, the discharge of springs, benthic invertebrates in streams, and quantity and quality of mine effluents all need to be monitored in order to detect changes in the hydrologic system caused by coal mining. (USGS)

Water-Resources Investigations Report

Hydrology of Polk County, Florida

Local water managers usually rely on information produced at the State and regional scale to make water-resource management decisions. Current assessments of hydrologic and water-quality conditions in Polk County, Florida, commonly end at the boundaries of two water management districts (South Florida Water Management District and the Southwest Florida Water Management District), which makes it difficult for managers to determine conditions throughout the county. The last comprehensive water-resources assessment of Polk County was published almost 40 years ago. To address the need for current countywide information, the U.S. Geological Survey began a 3?-year study in 2002 to update information about hydrologic and water-quality conditions in Polk County and identify changes that have occurred. Ground-water use in Polk County has decreased substantially since 1965. In 1965, total ground-water withdrawals in the county were about 350 million gallons per day. In 2002, withdrawals totaled about 285 million gallons per day, of which nearly 95 percent was from the Floridan aquifer system. Water-conservation practices mainly related to the phosphate-mining industry as well as the decrease in the number of mines in operation in Polk County have reduced total water use by about 65 million gallons per day since 1965. Polk County is underlain by three principal hydrogeologic units. The uppermost water-bearing unit is the surficial aquifer system, which is unconfined and composed primarily of clastic deposits. The surficial aquifer system is underlain by the intermediate confining unit, which grades into the intermediate aquifer system and consists of up to two water-bearing zones composed of interbedded clastic and carbonate rocks. The lowermost hydrogeologic unit is the Floridan aquifer system. The Floridan aquifer system, a thick sequence of permeable limestone and dolostone, consists of the Upper Floridan aquifer, a middle semiconfining unit, a middle confining unit, and the Lower Floridan aquifer. The Upper Floridan aquifer provides most of the water required to meet demand in Polk County. Data from about 300 geophysical and geologic logs were used to construct hydrogeologic maps showing the tops and thicknesses of the aquifers and confining units within Polk County. Thickness of the surficial aquifer system ranges from several feet thick or less in the extreme northwestern part of the county and along parts of the Peace River south of Bartow to more than 200 feet along the southern part of the Lake Wales Ridge in eastern Polk County. Thickness of the intermediate aquifer system/intermediate confining unit is highly variable throughout the county because of past erosional processes and sinkhole formation. Thickness of the unit ranges from less than 25 feet in the extreme northwestern part of the county to more than 300 feet in southwestern Polk County. The altitude of the top of the Upper Floridan aquifer in the county ranges from about 50 feet above National Geodetic Vertical Datum of 1929 (NGVD 29) in the northwestern part to more than 250 feet below NGVD 29 in the southern part. Water levels in the Upper Floridan aquifer fluctuate seasonally, increasing during the wet season (June through September) and decreasing during the rest of the year. Water levels in the Upper Floridan aquifer also can change from year to year, depending on such factors as pumpage and climatic variations. In the southwestern part of the county, fluctuations in water use related to phosphate mining have had a major impact on ground-water levels. Hydrographs of selected wells in southwestern Polk County show a general decline in water levels that ended in the mid-1970s. This water-level decline coincides with an increase in water use associated with phosphate mining. A substantial increase in water levels that began in the mid-1970s coincides with a period of decreasing water use in the county. Despite reductions in water use since 1970, howev

Scientific Investigations Report