Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Open Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

Height changes along selected lines through the Death Valley region, California and Nevada, 1905-1984

Comparisons among repeated levelings along selected lines through the Death Valley region of California and adjacent parts of Nevada have disclosed surprisingly large vertical displacements. The vertical control data in this lightly populated area is sparse; moreover, as much as a third of the recovered data is so thoroughly contaminated by systematic error and survey blunders that no attempt was made to correct these data and they were simply discarded. In spite of these limitations, generally episodic, commonly large vertical displacements are disclosed along a number of lines. Displacements in excess of 0.4 m, with respect to our selected control point at Beatty, Nevada, and differential displacements of about 0.7 m apparently occurred during the earlier years of the 20th century and continued episodically through at least 1943. While this area contains abundant evidence of continuing tectonic activity through latest Quaternary time, it is virtually devoid of historic seismicity. We have detected no clear connection between the described vertical displacements and fault zones reportedly active during Holocene time, although we sense some association with several more broadly defined tectonic features.

Open-File Report↗

High-resolution geophysical data from the inner continental shelf—Buzzards Bay, Massachusetts

The U.S. Geological Survey (USGS) and the Massachusetts Office of Coastal Zone Management (CZM) have cooperated to map approximately 410 square kilometers (km²) of the inner continental shelf in Buzzards Bay, Massachusetts. This report contains geophysical data collected by the USGS on three cruises conducted in 2009, 2010, and 2011, and additional bathymetry data collected by the National Oceanic and Atmospheric Administration in 2004. The geophysical data include (1) swath bathymetry using interferometric sonar and multibeam echosounder systems, (2) acoustic backscatter from sidescan sonar, and (3) seismic-reflection profiles from a chirp subbottom profiler. These spatial data support research on the Quaternary evolution of Buzzards Bay, the influence of sea-level change and sediment supply on coastal evolution, and efforts to understand the type, distribution, and quality of subtidal marine habitats in the coastal ocean of Massachusetts.

Massachusetts↗

High-resolution Quaternary seismic stratigraphy of the New York Bight continental shelf

A principal focus for the U.S. Geological Survey (USGS) Coastal and Marine Geology Program (marine.usgs.gov) is regional reconnaissance mapping of inner-continental shelf areas, with initial emphasis on heavily used areas of the sea floor near major population centers. The objectives are to develop a detailed regional synthesis of the sea-floor geology in order to provide information for a wide range of management decisions and to form a basis for further investigations of marine geological processes. In 1995, the USGS, in cooperation with the U.S. Army Corps of Engineers (USACOE), New York District, began to generate reconnaissance maps of the continental shelf seaward of the New York - New Jersey metropolitan area. This mapping encompassed the New York Bight inner-continental shelf, one of the most heavily trafficked and exploited coastal regions in the United States. Contiguous areas of the Hudson Shelf Valley, the largest physiographic feature on this segment of the continental shelf, also were mapped as part of a USGS study of contaminated sediments (Buchholtz ten Brink and others, 1994; 1996). The goal of the reconnaissance mapping was to provide a regional synthesis of the sea-floor geology in the New York Bight area, including: (a) a description of sea-floor morphology; (b) a map of sea-floor sedimentary lithotypes; (c) the geometry and structure of the Cretaceous strata and Quaternary deposits; and (d) the geologic history of the region. Pursuing the course of this mapping effort, we obtained sidescan-sonar images of 100 % of the sea floor in the study area. Initial interpretations of these sidescan data were presented by Schwab and others, (1997a, 1997b, 2000a). High-resolution seismic-reflection profiles collected along each sidescan-sonar line used multiple acoustic sources (e.g., watergun, CHIRP, Geopulse). Multibeam swath-bathymetry data also were obtained for a portion of the study area (Butman and others, 1998;). In this report, we present a series of structural and sediment isopach maps and interpretations of the Quaternary evolution of the inner-continental shelf off the New York - New Jersey metropolitan area based on subbottom, sidescan-sonar, and multibeam-bathymetric data.

New York↗

High-resolution geologic mapping of the inner continental shelf: Nahant to Gloucester, Massachusetts

This report presents high-resolution maps of the seafloor offshore of Massachusetts, from Nahant to Gloucester. Approximately 134 km² of the inner shelf were mapped with a focus on the nearshore region in water depths less than 40 m (fig. 1.1). The maps were prepared as part of a cooperative mapping program between the U.S. Geological Survey (USGS) and the Massachusetts Office of Coastal Zone Management (CZM). They are based on marine geophysical data, sediment sampling, and bottom photography obtained on two research cruises carried out in 2003 and 2004. The primary objective of this program is to develop a suite of seafloor maps that provide geologic information for management of coastal and marine resources. Accurate maps of seafloor geology are important first steps toward protecting fish habitat, delineating marine reserves, and assessing environmental changes due to natural or human impacts. The maps also provide a geologic framework for scientific research, industry and the public. The organization of this report is outlined in the navigation bar along the left-hand margin of the page. This is section 1, the introduction. Section 2 briefly describes the mapping products contained in this report and has links to large-format map sheets, that can be viewed on line or downloaded. Section 3 is a description of the data collection, processing, and analysis procedures used to create the map products. Section 4 examines the geologic framework and late Quaternary evolution of the region, and presents two different strategies for mapping the complex seafloor. This report also contains four appendices that include GIS layers of all data collected in this study, and copies of the sample and photographic data used to validate the interpretations.

Massachusetts↗

Latest Pleistocene and Holocene glacial events in the Colonia valley, Northern Patagonia Icefield, southern Chile

The Northern Patagonia Icefield (NPI) is the primary glaciated terrain worldwide at its latitude (46.5–47.5°S), and constraining its glacial history provides unique information for reconstructing Southern Hemisphere paleoclimate. The Colonia Glacier is the largest outlet glacier draining the eastern NPI. Ages were determined using dendrochronology, lichenometry, radiocarbon, cosmogenic 10 Be and optically stimulated luminescence. Dated moraines in the Colonia valley defined advances at 13.2 ± 0.95, 11.0 ± 0.47 and 4.96 ± 0.21 ka, with the last being the first constraint on the onset of Neoglaciation for the eastern NPI from a directly dated landform. Dating in the tributary Cachet valley, which contains an ice-dammed lake during periods of Colonia Glacier expansion, defined an advance at ca. 2.95 ± 0.21 ka, periods of advancement at 810 ± 49 cal a BP and 245 ± 13 cal a BP, and retreat during the intervening periods. Recent Colonia Glacier thinning, which began in the late 1800s, opened a lower-elevation outlet channel for Lago Cachet Dos in ca. 1960. Our data provide the most comprehensive set of Latest Pleistocene and Holocene ages for a single NPI outlet glacier and expand previously developed NPI glacial chronologies.

Colonia valley, Northern Patagonia Icefield↗

Preliminary report on the ground-water resources of the Klamath River basin, Oregon

The Klamath River basin, including the adjacent Lost River basin, includes about 5,500 square miles of plateaus, mountain-slopes and valley plains in south-central Oregon. The valley plains range in altitude from about 4,100 feet in the south to more than 4,500 feet at the northern end; the mountain and plateau lands rise to an average altitude of 6,000 feet at the drainage divide, some peaks rising above 9,000 feet. The western quarter of the basin is on the eastern slope of the Cascade Range and the remainder consists of plateaus, mountains, and valleys of the basin-and-range type. The rocks of the Klamath River basin range in age from Recent to Mesozoic. At the southwest side of the basin in Oregon, pre-Tertiary metamorphic, igneous, and sedimentary rocks, which form extensive areas farther west, are overlain by sedimentary rocks of Eocene age and volcanic rocks of Eocene and Oligocene age. These early Tertiary rocks dip east toward the central part of the Klamath River basin. The complex volcanic rocks of high Cascades include three units: the lowest unit consists of a sequence of basaltic lava flows about 800 feet thick; the medial unit is composed of volcanic-sedimentary and sedimentary rocksthe Yonna formation200 to 2,000 feet thick; the uppermost unit is a sequence of basaltic lava flows commonly about 200 feet thick. These rocks dip east from the Cascade Range and are the main bedrock formations beneath most of the basin. Extensive pumice deposits, which emanated from ancestral Mount Mazama, cover large areas in the northwestern part of the basin. The basin has an overall synclinal structure open to the south at the California boundary where it continues as the Klamath Lake basin in California. The older rocks dip into the basin in monoclinal fashion from the adjoining drainage basins. The rocks are broken along rudely rectangular nets of closely spaced normal faults, the most prominent set of which trends northwest. The network of fault displacements includes two main grabens, the Klamath and the Langell, which were downthrown approximately 50 and 1,000 feet, respectively. The average annual precipitation varies with the altitude, the higher parts of the Cascade Range getting more than 60 inches, and the semiarid valley plains receive as little as 13 inches in some places. Most precipitation occurs in the winter. The principal tributaries, Williamson and Sprague Rivers, rise near the higher parts of the eastern rim of the basin, flow through narrow valley plains to the western part, and discharge into Upper Klamath Lake. Wood River and associated creeks also empty into Upper Klamath Lake after draining southward along along the eastern foot of the Cascade Range. The Klamath River receives the outflow from Upper Klamath Lake, via Link River and Lake Ewauna, and flows southwestward through Keno Gap and hance through a youthful canyon, to its lower valley in California. The ground water occurs largely in an unconfined, or water-table, condition, though areas of local confinement are present. The regional water table is graded to a base level about equal to that of the major drainage on the valley plains. The slop of the water table, where water is confined, or the piezometric surface is downstream at about the same grade as that of the surface drainage in each of the larger valleys, and ground-water divides occur between the upper parts of adjacent major valleys. The principal water-bearing units are the lower lava rocks and upper lava rocks of the volcanic rocks of high Cascades, the pumice of Quaternary age, and the alluvium. In places layers of coarse fragmental material in the Yonna formation (Newcomb, 1958) also transmit water. The water-bearing units, especially the breccia layers of the lava rocks and the pumice, yield large amounts of water to wells and provide natural discharge outlets for the ground water. The spring outflows to the Williamson and Wood Rivers-Crooked Creek drainage, mea

Open-File Report↗

Quaternary sedimentation in Shelikof Strait, Alaska

Shelikof Strait, a nearly parallel-sided marine channel between the Kodiak Island group and the Alaska Peninsula, has experienced a succession of distinct sedimentary environments during Quaternary time. Pleistocene glaciers carved a deep basin into bedrock in the southwest part of the strait and a shallower platform surface with incised channels in the northeast. The basin and channels were filled with glacial and glacialmarine sediment before and during the time that ice retreated and oceanic conditions returned. Restricted marine conditions prevailed in early Holocene time and sediment prograded transversely into the strait from the adjacent landmasses, with some localized dispersal to the deep, central strait. Onset of modern open-marine conditions commenced when regional currents breached the sill across Kennedy and Stevenson Entrances to combine with sediment-laden outflow from Cook Inlet and deposit a blanket of well-stratified sediment throughout the strait.

Alaska↗

Stratigraphic framework and heavy minerals of the continental shelf of Onslow and Long Bays, North Carolina

One hundred fourteen vibracores from the Atlantic continental shelf offshore of southeastern North Carolina were opened, described, and processed over several contract years (years 6-9) of the Minerals Management Service-Association of American State Geologists Continental Margins program. Reports for years 9 and 10 of the program compiled the results of the work and assembled the data for release as an interactive CD-ROM report, respectively. The continental shelf of Onslow and Long Bays consists predominantly of outcropping Cretaceous through late Tertiary geologic units. Nearshore these units are covered and incised by late Tertiary and Quaternary units. From oldest to youngest, formally recognized geologic units mapped as part of this study are the Late Cretaceous Peedee Formation-a muddy, fine- to medium-grained quartz sand with trace amounts of glauconite and phosphate; the Paleocene Beaufort Formation-a muddy, fine- to medium-grained glauconitic quartz sand with locally occurring turritelid-mold biosparrudite; the middle Eocene Castle Hayne Formation-a sandy bryozoan biomicrudite and biosparrudite; the Oligocene River Bend Formation-a sandy molluscan-mold biosparrudite; and the Miocene Pungo River Formation-a medium-grained, poorly sorted slightly shelly phosphatic sand. Informal units include a very widespread, unnamed fine- to very fine grained, well-sorted, dolomitic muddy quartz sand that is biostratigraphically equivalent to the Oligocene River Bend Formation; several large valley-fill lithosomes composed of biomicrudite, biomicrite, and biosparrudite of Plio/Pleistocene age; muddy, shelly sands and silty clays of Pliocene, Pleistocene, or mixed Plio/Pleistocene age; and loose, slightly shelly, medium- to coarse-grained sands assigned a Holocene age. Heavy minerals (SG > 2.96) comprise an average of 0.54 wt% (on a bulk-sample basis) of the sediments in 306 samples derived from the 114 vibracores. Heavy-mineral content ranges from <0.01 to 3.69 wt%. The economic heavy mineral content (EHM = ilmenite + zircon + rutile + aluminosilicates + leucoxene [altered ilmenite] + monazite) of the bulk samples averages 0.26 wt% in a range of <0.01-1.70 wt%. As a percentage of the heavy-mineral concentrate, the average EHM value is 45.78% in a range of 0.27-68.60%. The distribution of heavy minerals offshore of southeastern North Carolina is controlled by the lithostratigraphic framework. The unnamed Oligocene sand unit has the highest heavy-mineral content, averaging 0.86 wt% on a bulk-sample basis. The remaining geologic units and their heavy-mineral content (in decreasing order of abundance) are Beaufort (0.64%), Holocene sand (0.60%), Plio-Pleistocene muddy sand and silty clay (0.59%), Peedee (0.42%), River Bend (0.34%), Plio-Pleistocene carbonate (0.12%), and Castle Hayne (0.08%). The heavy-mineral assemblage is fairly consistent throughout the different units. Significantly smaller percentages of heavy minerals correlate with increased amounts of CaCO 3 in the sediments. The sediments analyzed in this study have significantly lower overall heavy-mineral content, as well as lower EHM content than sediments that are known to host commercially important heavy-mineral deposits in the southeastern United States. The potential for economic deposits of heavy minerals in the area of this study, therefore, appears to be limited.

Marine Georesources and Geotechnology↗

Simulation of regional ground-water flow in the Cambrian-Ordovician aquifer system in the northern Midwest, United States: in Regional aquifer-system analysis

A six-State area in the northern Midwest of the United States has become increasingly dependent on ground water from the Cambrian-Ordovician aquifer system, which consists of a sequence of sandstones, carbonate rocks, and shales. Ground-water withdrawals from the aquifer system began in the late 1800's and increased to approximately 684 million gallons per day (1,058 cubic feet per second) by 1980. This withdrawal has caused more than 900 feet of decline in the potentiometric surface of the aquifer system in parts of the Chicago, Ill., area. Pumping in Minneapolis-St. Paul, Minn., Milwaukee, Wis., and central Iowa has produced a few hundreds of feet of water-level decline. A quasi-three-dimensional ground-water flow model was developed to improve understanding of the regional ground-water flow system by simulating the aquifer system under the conditions that existed before and during ground-water development. The Cambrian-Ordovician aquifer system and the overlying rocks were incorporated in the conceptual model as five aquifer layers with four intervening confining layers. The aquifer layers, from top to bottom, are as follows: Quaternary deposits and Cretaceous rocks (aquifer layer 5); basal Devonian carbonate rocks and underlying Silurian carbonate rocks (aquifer layer 4); Middle Ordovician St. Peter Sandstone, Lower Ordovician Prairie du Chien Group, and Upper Cambrian Jordan Sandstone (aquifer layer 3); Upper Cambrian Ironton and Galesville Sandstones (aquifer layer 2); and Upper Cambrian Mount Simon Sandstone and Precambrian Hinckley Sandstone (aquifer layer 1). The effects on the flow system of ground water having variable density and the individual aquifer layer contribution of flow to wells open to several aquifer layers were simulated by incorporating appropriate terms in the ground-water flow equation and corresponding modifications in the ground-water flow model. Results of steady-state simulations are shown as maps of freshwater head and as flow-rate vectors. A comparison was made of available predevelopment head data and simulated predevelopment heads for the Mount Simon, St. Peter-Prairie du Chien-Jordan, and Silurian-Devonian aquifers. The root mean square of the differences between observed and simulated heads for these aquifers was 53, 36, and 44 feet, respectively. Steady-state model simulation indicates that regional recharge areas are located in northwestern Iowa, southeastern Minnesota, much of Wisconsin, northern Illinois, and central Missouri. Regional discharge areas are located near the Mississippi River and its tributaries, the Missouri River, Lake Michigan, and the Illinois basin. Results of a transient simulation of the period 1861 to 1980 are shown as maps of freshwater head and freshwater-head decline. The root mean square of the differences between observed and simulated heads for the St. Peter-Prairie du Chien-Jordan aquifer was 63 feet. In addition, hydrographs of simulated hydraulic head were compared with hydrographs of observed head in wells open to various combinations of aquifers. The numerous head measurements within a model node display a wide range in magnitude; however, their historical trend generally follows the trend of the simulated heads. The simulated recharge from the glacial drift to the immediately underlying bedrock aquifers averages 0.03, 0.06, 0.24, and 0.02 inch per year, respectively, to the Mount Simon, Ironton-Galesville, St. Peter- Prairie du Chien-Jordan, and Silurian-Devonian aquifers for predevelopment conditions and 0.03, 0.07, 0.45, and 0.07 inch per year, respectively, to the same aquifers for 1976-80. These recharge rates are less than 1.5 percent of average annual precipitation of about 30 inches per year. Most of the recharge from precipitation discharges to streams as base flow through local and intermediate ground-water flow systems. Only a small fraction of the precipitation recharges the deeper, regional flow system. The simulated predevelopment recharge of 571 cubic feet per second is balanced by an equivalent discharge. For the period 1976-80, simulated recharge increased to 1,398 cubic feet per second. Total discharge, including pumpage from the four bedrock aquifers, increased to 1,619 cubic feet per second. The difference in recharge and discharge during this period is from aquifer storage. Results of variable-density simulations indicate that the rate of ground-water movement is small in areas where ground water is highly mineralized. The rates and directions are controlled by the intrinsic permeability of the rock, freshwater head gradients, and gravitational force.

Iowa, Illinois, Indiana, Michigan, Minnesota, Miss↗

Ground-water resources of the Wind River Indian Reservation, Wyoming

The area of this investigation is in the western part of the Wind River Basin and includes parts of the Absaroka, Washakie, Wind River, and Owl Creek Mountains. The purposes of the study were to determine the general hydrologic properties of the rocks in the area and the occurrence and quality c f the water in them. Structurally, the area is a downfolded basin surrounded by upfolded mountain ranges. Igneous and metamorphic rocks of Precambrian age are exposed in the mountains: folded sedimentary rocks representing all geologic periods, except the Silurian, crop out along the margins of the basin; and relatively flat-lying Tertiary rocks are at the surface in the central part of the basin. Surficial sand and gravel deposits of Quaternary age occur along streams and underlie numerous terraces throughout the basin. The potential yield and quality of water from most rocks in the area are poorly known, but estimates are possible, based on local well data and on data concerning similar rocks in nearby areas. Yields of more than 1,000 gpm are possible from the rocks comprising the Bighorn Dolomite (Ordovician), Darby Formation (Devonian), Madison Limestone (Mississippian), and Tensleep Sandstone (Pennsylvanian). Total dissolved solids in the water range from about 300 to 3,000 ppm. Yields of as much as several hundred gallons per minute are possible from the Nugget Sandstone (Jurassic? and Triassic?). Yields of 20 gpm or more are possible from the Crow Mountain Sandstone (Triassic) and Sundance Formation (Jurassic). Dissolved solids are generally high but are less than 1,000 ppm near outcrops in some locations. The Cloverly and Morrison (Cretaceous and Jurassic), Mesaverde (Cretaceous) and Lance(?) (Cretaceous) Formations may yield as much as several hundred gallons per minute, but most wells in Cretaceous rocks yield less than 20 gpm. Dissolved solids generally range from 1,000 to 5,000 ppm but may be higher. In some areas, water with less than 1,000 ppm dissolved solids may be available from the Cloverly and Morrison Formations. Tertiary rocks yield a few to several hundred gallons per minute and dissolved solids generally range from 1,000 to 5,000 ppm. Wells in the Wind River Formation (Eocene) yield about 1.-500 gpm of water having dissolved solids of about 200-5,000 ppm. Yields of a few to several hundred gallons per minute are available from alluvium (Quaternary). Dissolved solids range from about 200 to 5,000 ppm. Many parts of the Wind River Irrigation Project have become waterlogged. The relation of drainage problems to geology and the character and thickness of rocks in the irrigated areas are partly defined by sections drawn on the basis of test drilling. The drainage-problem areas are classified according to geologic similarities into five general groups: flood plains, terraces, underfit-stream valleys, slopes, and transitional areas. Drainage can be improved by open drains, buried drains, relief wells, and pumped wells or by pumping from sumps or drains. The methods that will be most successful depend on the local geologic and hydrologic conditions. In several areas, the most effective means of relieving the drainage problem would be to reduce the amount of infiltration of water by lining canals and ditches and by reducing irrigation water applications to the optimum. Water from underground storage in alluvium could supplement water from surface storage in some areas. A few thousand acre-feet of water per square mile are in storage in some of the alluvium. The use of both surface and underground storage would reduce the need for additional surface-storage facilities and also would alleviate drainage problems in the irrigated areas.

Water Supply Paper↗

High-resolution geophysical data from the Inner Continental Shelf: South of Martha's Vineyard and north of Nantucket, Massachusetts

The U.S. Geological Survey and the Massachusetts Office of Coastal Zone Management have cooperated to map approximately 185 square kilometers of the inner continental shelf south of Martha’s Vineyard and north of Nantucket, Massachusetts. This report contains geophysical data collected by the U.S. Geological Survey during a survey in 2013. The geophysical data include (1) swath bathymetry collected by using interferometric sonar, (2) acoustic backscatter from the interferometric sonar, and (3) seismic-reflection profiles from a chirp subbottom profiler. These spatial data support research on the Quaternary evolution of coastal Massachusetts, the influence of sea-level change and sediment supply on coastal evolution, and efforts to understand the type, distribution, and quality of subtidal marine habitats in the coastal ocean of Massachusetts.

Massachusetts↗

Ground-water resources of the Arkansas River basin in Arkansas

The Arkansas River basin in Arkansas lies almost entirely within the Interior Highlands physiographic division. The Interior Highlands consist of hilly to mountainous terrain underlain by sandstone, shale, limestone, and dolomite. That part of the basin southeast of Little Rock lies within the Gulf Coastal Plain and is characterized by flat to hilly topography. Significant water-yielding units within the Arkansas River basin include subsurface Paleozoic units such as the Eminence and Potosi Dolomites, the Gasconade Dolomite, and the Van Buren Formations, and Roubidoux Formation as well as outcrops of Paleozoic rocks, the Sparta Sand, and Quaternary deposits. The quality of groundwater withdrawn from the various aquifers in the study area is generally suitable for most uses, although commonly very hard and highly mineralized. Only the Sparta Sand yields a soft, less mineralized water. Yields from the different water-bearing units are highly variable. Several of the subsurface Paleozoic rocks rarely yield more than 10 gal/min. In the Coastal Plain, the Sparta Sand and the Quaternary deposits yield as much as 2,000 and 2,500 gal/min, respectively. Several studies have indicated substantial bacterial contamination of both wells and springs in this part of the study area. Also, nitrate concentrations that exceed U.S. Environmental Protection Agency primary drinking water standards occur in some areas. (USGS)

Open-File Report↗

Magnetic and gravity studies of Mono Lake, east-central, California

From August 26 to September 5, 2011, the U.S. Geological Survey (USGS) collected more than 600 line-kilometers of shipborne magnetic data on Mono Lake, 20 line-kilometers of ground magnetic data on Paoha Island, 50 gravity stations on Paoha and Negit Islands, and 28 rock samples on Paoha and Negit Islands, in east-central California. Magnetic and gravity investigations were undertaken in Mono Lake to study regional crustal structures and to aid in understanding the geologic framework, in particular regarding potential geothermal resources and volcanic hazards throughout Mono Basin. Furthermore, shipborne magnetic data illuminate local structures in the upper crust beneath Mono Lake where geologic exposure is absent. Magnetic and gravity methods, which sense contrasting physical properties of the subsurface, are ideal for studying Mono Lake. Exposed rock units surrounding Mono Lake consist mainly of Quaternary alluvium, lacustrine sediment, aeolian deposits, basalt, and Paleozoic granitic and metasedimentary rocks (Bailey, 1989). At Black Point, on the northwest shore of Mono Lake, there is a mafic cinder cone that was produced by a subaqueous eruption around 13.3 ka. Within Mono Lake there are several small dacite cinder cones and flows, forming Negit Island and part of Paoha Island, which also host deposits of Quaternary lacustrine sediments. The typical density and magnetic properties of young volcanic rocks contrast with those of the lacustrine sediment, enabling us to map their subsurface extent.

California↗

Preliminary investigation of faults and folds along the inner edge of the coastal plain in northeastern Virginia

Four en-echelon northeast-trending structures, including southeast-dipping monoclines and northwest-dipping high-angle reverse-faults, have been mapped along the inner edge of the Coastal Plain in northeastern Virginia -- an area generally considered to be undeformed. Although displacements are small (15to 60 m), the structures markedly affect the present distribution and thickness of Coastal Plain strata. Structure contour maps on Cretaceous and Paleocene lithostratigraphic units show that the amount of displacement on the structures increases downward, indicating recurrent movement. The major deformation occurred in the Cretaceous and middle(?) Tertiary but some movement in the latest Tertiary or Quaternary is possible. The structures, herein named the Stafford fault system, extend for at least 56 kilometers parallel to the Fall Line and the northeast[trending reach of the Potomac estuary. This relationship-supports the hypothesis that the Fall Line and major river deflections along it have been tectonically influenced.

Open-File Report↗

The Evolution of the Lower Missouri River: Preliminary Results of NMD Research at Lisbon Bottom

The purpose of this investigation is to determine the relationship between the geomorphology of Lisbon Bottom and the spatial and temporal distribution of its wetlands. The project is focused specifically on the Quaternary geology of the river valley and the relationship between the valley's alluvial architecture and the hydrogeology of its wetlands. The Quaternary geology of the river valley has been determined through a field reconnaissance and visual inspection of topographic maps and digital elevation data. Data describing the morphology of the main channel and the physical properties of Lisbon Bottom have been collected. On the basis of these data, a preliminary model of the alluvial architecture of Lisbon Bottom has been developed, but it lacks subsurface verification owing to equipment failures and unseasonable high water. To date, the publications and presentations describing the project include a U.S. Geological Survey Open-File Report (OFR 01-176), two seminars hosted by the University of Missouri - Rolla, and an abstract that was submitted and accepted by the Geological Society of America for its annual fall meeting in November 2001.

Lisbon Bottom, Missouri River↗

Evaluating connection of aquifers to springs and streams, Great Basin National Park and vicinity, Nevada

Federal agencies that oversee land management for much of the Snake Range in eastern Nevada, including the management of Great Basin National Park by the National Park Service, need to understand the potential extent of adverse effects to federally managed lands from nearby groundwater development. As a result, this study was developed (1) to attain a better understanding of aquifers controlling groundwater flow on the eastern side of the southern part of the Snake Range and their connection with aquifers in the valleys, (2) to evaluate the relation between surface water and groundwater along the piedmont slopes, (3) to evaluate sources for Big Springs and Rowland Spring, and (4) to assess groundwater flow from southern Spring Valley into northern Hamlin Valley. The study focused on two areas&mdash;the first, a northern area along the east side of Great Basin National Park that included Baker, Lehman, and Snake Creeks, and a second southern area that is the potential source area for Big Springs. Data collected specifically for this study included the following: (1) geologic field mapping; (2) drilling, testing, and water quality sampling from 7 test wells; (3) measuring discharge and water chemistry of selected creeks and springs; (4) measuring streambed hydraulic gradients and seepage rates from 18 shallow piezometers installed into the creeks; and (5) monitoring stream temperature along selected reaches to identify places of groundwater inflow. The Snake Range was formed by a generally normal-faulted uplift, where late Proterozoic and Cambrian siliciclastic rocks and metamorphic rocks are present at the highest altitudes and younger Paleozoic carbonate rocks are exposed along the flanks. The consolidated rocks are intruded by Jurassic to Tertiary age plutons, which are most common between the Lehman and Snake Creek drainage basins. Older Cenozoic rocks, including Oligocene volcanic rocks and Miocene sedimentary rocks, crop out locally and fill the basins that underlie Snake, Spring, and Hamlin Valleys. Younger Tertiary and Quaternary sedimentary (basin-fill) deposits overlie the older Cenozoic rocks. The rocks and deposits can be divided into three distinct aquifers. These aquifers include (1) basin-fill aquifers that consist of the permeable parts of the Cenozoic basin fill and some fractured or jointed Cenozoic volcanic rocks, (2) an upper carbonate-rock aquifer that consists of upper Paleozoic carbonate rocks overlying a regionally extensive middle Paleozoic siliciclastic confining unit, and (3) a lower carbonate-rock aquifer that consists of lower Paleozoic carbonate rocks. Secondary openings created by faults, shear zones, fractures, and, in the carbonate rocks, karst solution features, largely determine the water-transmitting properties of the volcanic- and carbonate-rock aquifers. The basin-fill aquifers are composed of a wide variety of rock types and have highly variable hydraulic properties. The three aquifers are stratigraphically and structurally heterogeneous, causing large variations in the ability to store and transmit water. The aquifers are separated by confining units in some areas and are in contact with each other in other areas, yet function as a single, composite aquifer system. Basin-fill aquifers most often overlie or adjoin the lower and upper carbonate-rock aquifers. Baker, Lehman and Snake Creek drainage basins were divided into five hydrologic zones on the basis of climate, geology, and topography. The five zones, from highest to lowest altitudes, are the mountain-upland, karst-limestone, upper-piedmont, lower-piedmont, and valley-lowland zones. The primary hydrologic connection between the mountain-upland and the valley-lowland zones is streamflow. Much of the streamflow from the mountain-upland zone is generated above tree line. Groundwater flow increases in the karst-limestone zone because of increased permeability caused by dissolution, which results in increased streamflow losses. Most of the increased groundwater flow is to springs near faults that form the boundary with the upper-piedmont zone. Thus, groundwater flow from the karst-limestone zone to the upper-piedmont zone was only 10 percent of the combined flow of streams and springs that exit the karst-limestone zone. About 60 percent of the water flowing from Rowland Spring in the Lehman Creek drainage basin was from streamflow losses along Baker Creek. The remaining flow from Rowland Spring comes from local recharge in the karst-limestone zone. In the upper-piedmont zone, the water table by Baker, Lehman and Snake Creeks was near the water level in the creeks for several hundred feet downstream from the karst-limestone zone. Water levels in piezometers along Snake Creek downstream from its confluence with Spring Creek were far below the streambed, indicating gravity drainage beneath this section of the creek. Estimated vertical hydraulic conductivity along a 3-mile reach of Snake Creek downstream of this confluence was 0.5 foot per day, which was an order of magnitude less than that estimated for Baker and Lehman Creeks. The low vertical hydraulic conductivity in the streambed along the lower reaches of Snake Creek results from chemical precipitation of calcite caused by off-gassing of carbon dioxide derived from springs at the end of the karst-limestone zone. The younger alluvial deposits thicken rapidly across faults that form the upper boundary of the lower-piedmont zone. The absence of springs or groundwater flow to the creeks upstream of these faults indicates they are not a complete barrier to groundwater flow. The water table was shallow in the valley-lowland zone in the Baker and Lehman Creek drainage basins, whereas the water table was more than 50 feet below land surface in the Snake Creek drainage basin. In contrast to thick basin fill in the valley-lowland zone in the Baker and Lehman Creek drainage basins, fractured and karst limestone underlie basin fill at relatively shallow depths in Snake Creek drainage basin. The underlying limestone acts as a drain for groundwater in the basin fill beneath Snake Creek. A groundwater divide in southern Spring Valley south of Baking Powder Flat separates groundwater flow to the flat from southeastward flow into northern Hamlin Valley. Groundwater flow from southern Spring Valley south of the groundwater divide into northern Hamlin Valley was estimated to range from 6,000 to 11,000 acre-feet per year. This groundwater does not flow to Big Springs in southern Snake Valley; rather, the source of water to Big Springs is groundwater recharge in the Big Spring Wash drainage basin and in nearby smaller drainage basins at the south end of the Snake Range. Groundwater flow from southern Spring Valley continues through the western side of Hamlin Valley before being directed northeast toward the south end of Snake Valley. This flow is constrained by southward-flowing groundwater from Big Spring Wash and northward-flowing groundwater beneath central Hamlin Valley. The redirection to the northeast corresponds to a narrowing of the width of flow in southern Snake Valley caused by a constriction formed by a steeply dipping middle Paleozoic siliciclastic confining unit exposed in the flanks of the mountains and hills on the east side of southern Snake Valley and shallowly buried beneath basin fill in the valley. The narrowing of groundwater flow could be responsible for the large area where groundwater flows to springs or is lost to evapotranspiration between Big Springs in Nevada and Pruess Lake in Utah.

Nevada↗

Geologic setting and stratigraphy of the Ziegler Reservoir fossil site, Snowmass Village, Colorado

The geologic setting of the Ziegler Reservoir fossil site is somewhat unusual – the sediments containing the Pleistocene fossils were deposited in a lake on top of a ridge. The lake basin was formed near the Town of Snowmass Village, Colorado when a glacier flowing down Snowmass Creek Valley became thick enough to overtop a low point in the eastern valley wall and entered the head of Brush Creek Valley. When the glacier retreated at the end of the marine isotope stage (MIS) 6, ~155-130 ka (thousands of years before present), the Brush Creek Valley lobe left behind a moraine that impounded a small alpine lake. The lake was initially ~10 m deep and was highly productive during most of its existence based on the abundant and exquisitely preserved organic material present in the sediments. Over time, the basin slowly filled with (mostly) eolian sediment such that by ~85 ka it contained more of a marsh or wetland than a true lake. Open water conditions returned briefly between ~75 and 55 ka before the impoundment was finally breached to the east, establishing ties with the Brush Creek drainage system and creating an alpine meadow that persisted until historic times.

Colorado↗

Preliminary geologic map of the Simi 7.5' quadrangle, southern California: A digital database

The Simi Quadrangle covers an area of about 62 square miles in southern Ventura County. The Santa Clara River Valley occupies the northwestern corner of the quadrangle. Mountainous terrain of South Mountain and Oak Ridge characterizes the northern and central area. Elevation within the quadrangle ranges from about 250 feet along the arroyo bottoms to over 2200 feet. Steep, highly dissected slopes form much of the boundary of the area. In the southeast, Little Simi Valley, drained by Arroyo Simi/Arroyo Las Posas, separates the southern flank of Oak Ridge from the Las Posas Hills. The Las Posas upland area, a broad elevated region that slopes gently to the south, separates the South Mountain-Oak Ridge highlands from the Las Posas-Camarillo Hills between Little Simi Valley on the east and the Oxnard Plain on the west. This relatively low-lying area is also referred to as the Las Posas Valley. Numerous north-south-trending drainages cut South Mountain and Oak Ridge creating steep narrow canyons on north-facing slopes and wide flat-bottomed canyons with incised streams on south-facing slopes. A network of residential streets and ranch and oilfield roads that traverse the area from U.S. Highway 101 and State Highways 118, 23, and 126 provides access to the area. Current land use includes citrus and avocado orchards, oil well drilling and production, sand and gravel quarries, decorative-rock quarries, cattle grazing, suburban residential development, and golf courses. The oldest geologic unit mapped in the Simi Quadrangle is the upper Eocene to lower Miocene Sespe Formation. The Sespe Formation consists of alluvial fan and floodplain deposits of interbedded pebble-cobble conglomerate, massive to thick-bedded sandstone, and thin-bedded siltstone and claystone. In the northern part of the map area, Sespe Formation is overlain by and interfingers with the upper Oligocene to lower Miocene Vaqueros Formation that is composed of transitional and marine sandstone, siltstone, and claystone with local sandy coquina beds. In the Las Posas Hills, Sespe Formation is unconformably overlain by marine sandstones of the middle Miocene Topanga Group that are interlayered with and intruded by basalt flows, breccia, and diabase dikes of the Conejo Volcanics. Deep-marine strata of the upper Miocene Modelo Formation cover the Vaqueros Formation and Topanga Group along the crests and southern flanks of South Mountain and Oak Ridge. They also occur as isolated outcrops in the Las Posas Hills. Locally, Modelo Formation consists of interbedded diatomaceous shale, claystone, mudstone, and siltstone with minor sandstone, limestone, chert, and tuff beds. The most widely exposed rock units in the area are the Plio-Pleistocene marine and non-marine Pico and Saugus Formations that crop out on the southern flank of South Mountain-Oak Ridge. Locally, the Pico Formation consists of marine siltstone and silty shale with minor sandstone and pebbly sandstone. The Saugus Formation overlies and interfingers with the Pico Formation and is composed of interbedded shallow-marine to brackish water sandstone, siltstone, pebble-to-cobble conglomerate, and coquina beds that grade laterally and vertically into non-marine sandstone, siltstone, and conglomerate. A local member of the Saugus Formation is exposed in the southwest corner of the map area. It is predominantly a volcanic breccia conglomerate that resembles the Conejo Volcanics breccia, but is believed to represent remnants of landslide debris shed from the Conejo Volcanics into a local trough during Saugus time. Quaternary surficial deposits cover the floor and margins of the Little Simi Valley, Santa Clara River Valley in the north, and Arroyo Las Posas in the south, and extend up into the larger canyons that drain South Mountain and Oak Ridge. Extensive surficial deposits are also present in the Las Posas upland area in the southwest. These upper Pleistocene to Holocene sediments consist of older and younger alluvial fan and valley deposits, colluvium, active alluvial fans, and active stream deposits. Pleistocene- to Holocene-age landslide deposits are widespread throughout the Simi Quadrangle, especially in the finer grained Tertiary sedimentary units where bedding planes are dip slopes. In addition, massive slumps are present in the Sespe and Vaqueros Formations on anti-dip slopes. Seismic and well data from the San Fernando Valley (SFV) document evolution of that region from mid-Miocene rifting to north-south contraction. Formations in the western SFV subsurface (Cretaceous to Paleogene strata, and Miocene Topanga and Modelo Formations) trace southward to outcrops in the Santa Monica Mountains that constrain faulting along the valley's south basin edge. Cretaceous strata in the Simi Uplift to the west are over 2 km higher than equivalent strata beneath the western SFV across a boundary marked by the Chatsworth Reservoir fault, and Neogene thinning and offlap. The Simi fault, located at the eastern end of the Simi-Santa Rosa fault system, bounds the northern margins of the Simi and Tierra Rejada Valleys. West of Simi Valley, the Simi fault has placed Miocene Conejo Volcanics over Plio-Pleistocene Saugus Formation rocks. The 15.5 ± 0.8 m.y.a. base of the Conejo Volcanics, identified in oil well logs, is inferred to have a dip-slip separation of about 425 to 550 m, suggesting a low long-term slip rate of about 0.03 mm/yr. However, substantial late Quaternary offset is suggested by the presence of more than 150 m of Pleistocene and younger alluvium that fills the east-west trending, down-dropped bedrock trough beneath western Simi Valley. In addition, trenching within faulted colluvial deposits in Tierra Rejada Valley has revealed evidence of multiple shears within Holocene (?) deposits.

California↗