SEARCH · Geology Reports

Results for “Near Surface Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

735 records · Page 16Linked to original sources

USGS2024

Substrate Enhancement Pilot Project—Monitoring summary and evaluation, Kootenai River, Idaho, 2012–22

To assess changes in substrate conditions and the efficacy of artificially placed substrates at select sites on the Kootenai River near Bonners Ferry, Idaho, the U.S. Geological Survey, in cooperation with the Kootenai Tribe of Idaho, completed repeat bathymetric, velocimetric, and underwater videography surveys. Collectively, three project sites throughout the Kootenai River make up the Substrate Enhancement Pilot Project (SEPP), an effort intended to improve spawning and egg incubation viability at locations identified to be aquatic habitat limited for the endangered Kootenai River white sturgeon (Acipenser transmontanus). Following the placement of coarse substrates at each site, bathymetric, velocimetric, and underwater videography data were collected from 2012 to 2022 to assess the role of deposition and erosion on maintaining suitable white sturgeon spawning and incubation substrates. Minimal erosion and deposition occurred at all Substrate Enhancement Pilot Project sites, according to interannual and intra-annual net volumetric changes between bathymetric surveys. Depending on the timing of bathymetric surveys relative to the annual peak streamflow conditions, isolated locations of deposition or erosion were observed at each site and the potential for deposition or erosion was supported by measured mean depth-averaged velocities. This study concluded that variability of deposition and scour were common at each site throughout the monitoring period and may be attributed to fluctuations in streamflow. Repeat bathymetric, underwater videography, and velocity mapping surveys were used to verify the interstitial spaces and surfaces of substrates at each SEPP site remained free of fine sediments for intervals longer than a year but were susceptible to deposition between high streamflow events.

Idaho↗

USGS2025

Using hydrogeologic context and water budgets to evaluate the potential for groundwater contributions to contaminants in Lake Superior

This study presents a synthesis of the hydrogeology in the U.S. Lake Superior watershed and the contribution of groundwater to the water budget of the U.S. Lake Superior basin. Much of the shoreline of Lake Superior in Minnesota and Michigan is composed of hydrogeologic units contributing very little direct groundwater discharge to the lake. Groundwater in watersheds adjacent to the lake typically flows in short, local flow systems characterized by thin glacial sediments with active groundwater flow in fractured bedrock within the top 60–90 m below land surface. The complex groundwater system in Wisconsin’s Bayfield Peninsula has the largest groundwater reservoir near the lake, characterized by thick sand and gravel glacial deposits and underlying sandstone aquifer. Although these thick sandy glacial deposits are not in direct contact with the lake at the shoreline, groundwater discharge may still be significant via subsurface exposures beyond the shoreline or flow through the underlying sandstone aquifer. Overall, most groundwater in the watershed is contributed as indirect base flow in streams around the lakeshore and comprises about 60 percent of the upland water budget. Direct groundwater flow to the shoreline contributes 2 to 9 percent of the inflow. Identifying possible contamination sources through direct sampling of groundwater would be an inefficient way to detect problems if sources are unknown, particularly for some chemicals of concern such as PFAS, pesticides, PCBs, chloride, and nutrients. Evaluating the chemical characteristics of contamination is also important to consider in evaluating how groundwater may contribute to pollution in Lake Superior.

Lake Superior↗

USGS2025

Multi-lithofacies alluvial characterization via airborne electromagnetic-borehole fusion using ordinary interval kriging and geologic constraints

Airborne electromagnetic (AEM) survey provides extensive spatial coverage and detailed resolution at the near surface and can be used to develop hydrogeological models. However, utilization of AEM data is not straightforward because AEM resistivity is an indirect measurement for inferring sediment types. This study develops an ordinary interval kriging (OIK) algorithm and a resistivity-to-multi-lithofacies (R2ML) data fusion workflow for multi-lithofacies alluvial characterization. OIK utilizes irregular interval data to construct three-dimensional (3D) resistivity fields from one-dimensional inverted AEM resistivity models. The R2ML workflow maps the resistivity field generated from OIK into a multi-facies lithological model, incorporating geologic constraints derived from well logs and geological observations. The numerical and real-world cases demonstrate that OIK is computationally efficient, accounts for 3D anisotropy, and minimizes the smoothing effect, thereby preserving resistivity contrasts and reducing interpolation uncertainty. The methodology is applied to lithologic characterization of the Mississippi River Valley alluvial aquifer (MRVA) in the Shellmound area, Mississippi, U.S. A frequency-domain AEM survey was conducted to support groundwater studies for the managed aquifer recharge (MAR) to the MRVA. The resulting lithological model, including four types of lithofacies—clay, very fine sand, fine-medium sands, and graveliferous sands, illustrates the geomorphological processes of the MRVA and implies potential MAR. The alignment between the lithological model and existing geological and hydrogeological investigations demonstrates that OIK and R2ML workflow effectively capture the subsurface architecture of the MRVA. The methods have broad applicability for characterizing alluvial aquifers through AEM-borehole data fusion, supporting sustainable groundwater management.

Mississippi↗

USGS2024

Anaerobic biodegradation of perfluorooctane sulfonate (PFOS) and microbial community composition in soil amended with a dechlorinating culture and chlorinated solvents

Perfluorooctane sulfonate (PFOS), one of the most frequently detected per - and polyfluoroalkyl substances (PFAS) occurring in soil, surface water, and groundwater near sites contaminated with aqueous film-forming foam (AFFF), has proven to be recalcitrant to many destructive remedies, including chemical oxidation. We investigated the potential to utilize microbially mediated reduction (bioreduction) to degrade PFOS and other PFAS through addition of a known dehalogenating culture, WBC-2, to soil obtained from an AFFF-contaminated site. A substantial decrease in total mass of PFOS (soil and water) was observed in microcosms amended with WBC-2 and chlorinated volatile organic compound (cVOC) co-contaminants — 46.4 ± 11.0 % removal of PFOS over the 45-day experiment. In contrast, perfluorooctanoate (PFOA) and 6:2 fluorotelomer sulfonate (6:2 FTS) concentrations did not decrease in the same microcosms. The low or non-detectable concentrations of potential metabolites in full PFAS analyses, including after application of the total oxidizable precursor assay, indicated that defluorination occurred to non-fluorinated compounds or ultrashort-chain PFAS. Nevertheless, additional research on the metabolites and degradation pathways is needed. Population abundances of known dehalorespirers did not change with PFOS removal during the experiment, making their association with PFOS removal unclear. An increased abundance of sulfate reducers in the genus Desulfosporosinus (Firmicutes) and Sulfurospirillum (Campilobacterota) was observed with PFOS removal, most likely linked to initiation of biodegradation by desulfonation. These results have important implications for development of in situ bioremediation methods for PFAS and advancing knowledge of natural attenuation processes.

Science of the Total Environment↗

USGS2026

Albuquerque Seismological Laboratory strategic vision

This circular presents a strategic outlook for the U.S. Geological Survey (USGS) Albuquerque Seismological Laboratory (ASL) for the next 10 years (2026–36). The ASL is a USGS field office in the Geological Hazards Science Center that operates portions of the Advanced National Seismic System and the Global Seismographic Network and focuses on fundamental research for instrumentation testing and data quality. The strategic outlook is categorized into two types of tasks: “Foundational Tasks” and “Aspirational Tasks.” Foundational Tasks are those that maintain the laboratory’s basic operations and services, including regional and global seismic monitoring, improving data quality, and providing instrument testing and support. A suite of Aspirational Tasks is also articulated; these can be considered priority targets of ASL that could improve ASL’s seismic monitoring capabilities and mission. Such tasks include improvements to remote stations, testing capabilities of nonseismic geophysical instruments, detection threshold monitoring, rapid aftershock deployments, and expanding seismic monitoring networks. This report was written with input from the USGS Geological Hazards Science Center, the USGS Earthquake Hazards Program (EHP), and colleagues with an interest in the work done by the ASL. Although the details of these tasks may change, this document can provide guidance on the overarching tasks at the ASL from 2026 to 2036 and an overview of the various components of the ASL and how they fit into the EHP and the Global Seismographic Network Program.

Circular↗

USGS2024

Water-quality characteristics of the Red River of the North and tributaries in the Fargo-Moorhead metropolitan area, North Dakota, 2019–22

The Flood Risk Management Project was initiated in 2008 in the Fargo-Moorhead metropolitan area to reduce flood risk, flood damages, and flood protection costs in the Fargo-Moorhead metropolitan area. In cooperation with the U.S. Army Corps of Engineers, the U.S. Geological Survey initiated a water-quality monitoring study to describe the water-quality characteristics of the Red River of the North and its tributaries in the Fargo-Moorhead metropolitan area during the preconstruction period of the Flood Risk Management Project from October 1, 2019, to October 1, 2022. The monitoring study included the collection of discrete and continuous water-quality data and streamflow monitoring at selected sites that integrated and enhanced existing monitoring programs within the study area. Discrete samples collected at 10 sites in the Fargo-Moorhead metropolitan area were analyzed for major ions, trace elements, nutrients, suspended sediment, pesticides, and fecal indicator bacteria. In general, major ion concentrations were higher at sites on the tributaries (Wild Rice, Sheyenne, and Maple Rivers) compared to sites on the Red River of the North. In general, bicarbonate, calcium, magnesium, and sulfate represented most of the dissolved ions measured in samples collected at the 10 sites. Calcium, chloride, fluoride, potassium, silica, and sodium were also measured in samples, but they represented a smaller portion of the total dissolved ions. Sulfate was the most dominant dissolved ion that had the highest concentrations among the major ions measured in samples. A total of 18 trace elements were analyzed in discrete samples. Several of the trace elements had concentrations below the laboratory reporting level in all of the samples, including antimony, beryllium, cadmium, chromium, silver, and thallium. Sites on the Wild Rice River generally had the highest concentrations of arsenic, barium, boron, manganese, and nickel compared to the other sites. Nutrients analyzed in discrete samples included filtered and unfiltered concentrations of ammonia, nitrate plus nitrite, phosphorus, and organic carbon. The median filtered ammonia concentration at most sites was less than the laboratory reporting level of 0.03 milligram per liter as nitrogen except for the Sheyenne River at Harwood, North Dakota (U.S. Geological Survey [USGS] station 05060400), and Red River of the North near Georgetown, Minnesota (USGS station 05062130). The lowest median unfiltered nitrate plus nitrite concentration was measured at sites on the Red River of the North upstream from the Fargo-Moorhead metropolitan area and the highest median was at sites on the Red River of the North downstream from the Fargo-Moorhead metropolitan area compared to all other sites. The increase in nitrate plus nitrite concentrations could reflect the effect of the wastewater-treatment plant discharge that enters the Red River of the North upstream from the site located downstream from the Fargo-Moorhead metropolitan area and from urban runoff. Phosphorus (unfiltered) concentrations were generally higher at sites on the Maple and Sheyenne Rivers compared to the other sites and were higher at sites on the Red River of the North downstream from the Fargo-Moorhead metropolitan area compared to sites upstream on the Red River of the North. Suspended-sediment concentrations were generally highest at sites in the Sheyenne River and lowest in the upstream Red River of the North sites. Suspended-sediment concentration was highly variable in samples collected at the 10 sites, mostly influenced by the occurrence of snowmelt and rainfall-runoff events. The Sheyenne River near Kindred, N. Dak. (USGS station 05059000) had the largest range in sediment concentrations in samples collected at the 10 sites. For all sites other than the Sheyenne River near Kindred, N. Dak., 95 percent or more of the suspended sediment had particle diameter sizes less than 0.0625 millimeter in 50 percent of the samples (median). Of the 102 pesticides and pesticide degradates analyzed, 45 constituents had no detectable concentrations in any of the 17 samples collected at five sites. The remaining 57 pesticides had at least one detection in the samples collected at the five sites. The sites on the Wild Rice River (near Abercrombie, N. Dak., USGS station 05053000, and near St. Benedict, N. Dak., USGS station 05053500) and Sheyenne River near Kindred, N. Dak., had fewer pesticide detections compared to the Maple River below Mapleton, N.Dak. (USGS station 05060100) and the Red River of the North at Fargo, N. Dak (USGS station 05054000) and near Georgetown, Minn. Patterns in annual loads generally followed the same pattern as streamflow at the 10 sites for water years 2020–22. A water year is the 12-month period from October 1 to September 30 and is designated by the calendar year in which it ends. The greatest loads for all constituents were delivered at the two downstream sites on the Red River of the North; sites that also had the highest annual streamflows among the sites and the greatest loads were delivered in water year 2020 when the highest streamflows occurred at the sites. Likewise, the least loads for most constituents were at the Maple River and were least in 2021 compared to the other years because of low-streamflow conditions. Water-quality measurements continuously recorded at the Red River of the North at Hickson, N. Dak. (USGS station 05051522); Red River of the North at Fargo, N. Dak.; and Red River of the North near Georgetown, Minn. included water temperature, specific conductance, dissolved oxygen, pH, and turbidity. Specific conductance values were similar for the Red River of the North near Hickson, N. Dak., and Red River of the North at Fargo, N. Dak., when compared to the Red River of the North near Georgetown, Minn. that had higher values than the other two sites. Dissolved oxygen concentrations and pH were similar among the three sites on the Red River. The patterns in turbidity were mostly related to streamflow conditions and were similar among the three sites on the Red River of the North.

Minnesota, North Dakota↗

USGS2026

Integrating detrital magnetite geochemistry and (U-Th)/He chronometry as a sediment provenance tool in geologic and metallogenic terranes

Magnetite is ubiquitous in porphyry Cu systems and in sediment sourcing both barren and mineralized regions, with potential as an indicator mineral in concealed and coarsely-mapped terranes. We develop and test a workflow for integrated geochemistry and (U–Th)/He (He) dating for inferring detrital magnetite (DMt) provenance in these settings. The ca. 70 Ma Taurus porphyry Cu–Mo(–Au) district in eastern interior Alaska serves as a test case. DMt from streams draining porphyry-related mineralization was characterized by geochemistry and mineral inclusion and microstructure observations, complemented by similar data for potential porphyry and host rock sources. Principal component analysis and clustering of DMt geochemical data resolve multiple populations in our samples geochemically and texturally compatible with derivation from metamorphic, porphyry-related hydrothermal, and igneous sources. Hydrothermal magnetite comprises ∼16–50% of DMt nearest porphyry mineralization but diminishes to ∼4% ∼15 km downstream. Subsampled grains within populations yield ∼160–110 Ma, ∼70 Ma, ∼55 Ma, and ∼20 Ma magnetite He date modes. Combined with provenance, He dates capture Early Cretaceous regional exhumation of metamorphic host rock and Late Cretaceous porphyry Cu mineralization. DMt grains showing partial hematite replacement yield ca. 55–20 Ma dates regardless of source, overlapping regional warm/wet climatic intervals. We interpret Cenozoic dates to reflect exhumation to near-surface oxidizing conditions and(or) supergene weathering. Magnetite is thus a promising target phase for (1) tracking the spatiotemporal distribution of porphyry systems, and (2) linking the formation and exhumation of these systems to a regional geologic history, both in Alaska and globally.

Alaska, Yukon↗

USGS2026

Quantifying methane emissions from a rich fen with uncrewed aircraft systems in boreal Alaska

Thawing of permafrost in northern latitudes is accelerating, potentially releasing substantial amounts of methane (CH 4 ) as forested permafrost plateaus transition into wetlands. This ecosystem shift alters the carbon exchange between the soil and atmosphere, influencing the permafrost-carbon feedback. Monitoring these changes may require measurement platforms operating across varied spatial and temporal scales. Recent advancements in small uncrewed aircraft systems (sUAS) enable high resolution CH 4 flux quantification in remote, complex terrains; however, comparisons with established methods such as eddy covariance flux towers remain limited. We used a hexacopter sUAS to quantify CH 4 emissions from the Alaska Peatland Experiment, a wetland within the Bonanza Creek Experimental Forest. Using an ensemble of methods to define the background CH 4 concentration, along with near surface emissions from soil chambers, helped constrain our flux estimates. The sUAS method yielded an average flux of 0.0077 ± 0.0019 mol s −1 CH 4 , within a factor of two concurrent tower-derived total source flux estimates (0.0036 ± 0.00042 mol s −1 CH 4 ). To assess spatial drivers of observed fluxes, we conducted a 2D footprint analysis and overlaid the results with high-resolution hyperspectral land cover classification, quantifying vegetative contributions within each footprint. This revealed higher fen representation in sUAS measurements (73.8%) than in tower footprints (58.8%), and lower tussock meadow representation (15.6% and 30.3%, respectively). These differences were consistent with known variation in vegetation-specific CH 4 emissions. Our results highlight that combining footprint modeling with land cover characterization can enhance interpretations of CH 4 fluxes and guide cross-platform comparisons.

JGR Atmospheres↗

USGS2026

Determination of baseline water-quality conditions using continuous specific conductance and discrete measurements of total dissolved solids and selected major ions, Arkansas River Basin, Colorado

From 2022 through 2024, the U.S. Geological Survey (USGS) in cooperation with the Regional Resources Planning Group (Southeastern Colorado Water Conservancy District, Colorado Springs Utilities, Pueblo Water, Lower Arkansas Valley Water Conservancy District, Aurora Water, and Upper Arkansas Water Conservancy District) established a basinwide water-quality monitoring network in the Arkansas River Basin in Colorado. The study leveraged ongoing continuous measurements of streamflow and specific conductance (SC) at 13 sites along the main stem Arkansas River and Fountain Creek from the USGS 07108600 Arkansas River at Granite, Colo., (Ark Granite) site to the USGS 07137500 Arkansas River near Coolidge, Kansas, (Ark Coolidge) site. Baseline water-quality conditions were established using data from October 1989 through September 2022 to help identify changes in water quality that could result from changes in land and water use. Total dissolved solids (TDS) concentration was the main indicator of general water quality in this study because it can be accurately estimated from SC and is sensitive to changes in streamflow, water operations, and source contributions. Median TDS concentrations in Arkansas River samples (October 1989 through December 2023) ranged from 75 milligrams per liter (mg/L) at Ark Granite near the headwaters to 3,660 mg/L at Ark Coolidge near the Colorado–Kansas State line. Distinct seasonal differences in median streamflow and TDS were apparent during the winter and summer months. Seasonal Kendall tests showed no significant trends in monthly mean streamflow (October 1995 through September 2022) at Arkansas River sites upstream from Pueblo Reservoir. Upward trends in TDS concentrations and loads occurred only at Ark Granite. Downward trends in streamflow, TDS concentrations, and TDS loads occurred at Arkansas River sites from USGS 07109500 Arkansas River near Avondale, Colo., to Ark Coolidge. Downward trends in streamflow and SC (surrogate for TDS) were more prevalent during winter base flow months and may indicate changes in groundwater quantity, and possibly groundwater quality, potentially affecting the river water-quality condition.

Colorado↗

USGS2024

Geologic map of Scoggins Dam, Henry Hagg Lake, and Scoggins Valley, Washington County, Oregon

New geologic mapping (Wells and others, 2020b) and geophysical mapping (Blakely and others, 2000; McPhee and others, 2014; Wells and others, 2020a) document kilometers of Cenozoic right-lateral offset along the Gales Creek Fault Zone, a major, northwest-striking fault zone forming the boundary between the Tualatin Valley and the Coast Range. The Bureau of Reclamation’s (Reclamation) Scoggins Dam (fig. 1), in the Coast Range foothills west of Forest Grove, Oregon, lies within the Gales Creek Fault Zone as mapped by Wells and others (2020a, 2020b; fig. 2). Active faults of the Gales Creek Fault Zone defined by paleoseismic trenching (Redwine and others, 2017, 2019b, Horst and others, 2018, 2019, 2021, and Wells and others, 2020a) are presently mapped as projecting through the existing dam. The Pacific Northwest Region of Reclamation requested assistance with geologic studies around Scoggins Dam to provide better understanding of fault locations and their activity, which are needed to design a modification of the dam (Maguire, 2019a, b). The scope of this project includes detailed geology of the existing Scoggins Dam site, Henry Hagg Lake, the reservoir behind the dam, and Scoggins Valley downstream of the existing dam, particularly around a potential new dam site, where Scoggins Creek cuts through a narrow gap formed by a resistant felsic tuff bed that crosses the valley.

Oregon↗

USGS2024

Post-wildfire debris flows

Post-wildfire debris flows pose severe hazards to communities and infrastructure near and within recently burned mountainous terrain. Intense heat of wildfires changes the runoff characteristics of a watershed by combusting the vegetative canopy, litter, and duff, introducing ash into the soil and creating water repellant soils. Following wildfire, rainfall on bare ground is less able to infiltrate into the fire-altered soils and overland flow is less impeded by vegetation. Rainfall runoff in recently burned areas can erode hillslopes owing to the removal of soil binding organic matter near the soil surface by fire. In channels, loose, dry-ravel deposits composed of sand and gravel are readily entrained by concentrated runoff in channels. Entrainment of soil on hillslopes and in channels bulks up the sediment concentration of the rainfall runoff to generate debris flows capable of transporting boulders and large woody debris. Post-wildfire debris flows can be triggered by rainfall conditions that would typically produce little runoff during unburned conditions. The primary rainfall trigger for post-wildfire debris flows is high intensity rainfall during short duration convective rainstorms or periods of high rainfall intensity embedded within a long-duration frontal storm. Numerous observations of debris flows triggered by storms lasting less than an hour following periods of little to no rainfall indicate that antecedent rainfall is not a requirement for initiation of post-wildfire debris flows. Post-wildfire debris-flow hazard assessment entails estimating probability and magnitude of debris flows in the burned area, estimating debris-flow runout and intensity, and defining rainfall intensity-duration thresholds for debris-flow initiation. In the United States, probability and magnitude is estimated using empirically derived models largely based on data collected in southern California. The models provide maps to identify watersheds and drainage paths where post-wildfire hazards are most pronounced. Rainfall intensity-duration thresholds can be incorporated into flood hazard forecasting tools. Currently, work is underway to identify how to best implement debris-flow runout models in burned areas with efficiency and accuracy. Post-wildfire debris flows have been a long-recognized process in the Transverse Ranges of southern California; however, climate change is driving more frequent wildfires to burn more mountainous terrain throughout the western United States and worldwide. As a result, post-wildfire debris flows are becoming a more common threat in areas where they were once infrequent. As the threat of post-wildfire debris flow expands into new areas, evaluating the hazard becomes challenging because the degree to which wildfire increases debris-flow susceptibility varies from region to region. This chapter summarizes the knowledge to date for evaluating post-wildfire debris-flow susceptibility and hazard assessment. We summarize the characteristics of wildfire burn severity, topography, underlying soil and geology, and rainfall conditions that contribute to making a watershed most likely to produce post-wildfire debris flows. Methods for hazard assessment in the United States and other countries are summarized. We highlight knowledge gaps for how post-wildfire debris-flow susceptibility varies throughout the western United States and worldwide and identify research needs to improve hazard assessment methods in different geographies.

Book chapter↗

USGS2025

Quantitative mineral resource assessment of lithium pegmatite deposits in the Appalachian Orogen, USA

Lithium is classified as a U.S. critical mineral commodity, and its demand is projected to drastically increase through 2040, driven by electric vehicle production and energy storage applications (IEA 2021).Most global lithium production is not in the United States increasing vulnerability to a supply disruption. The U.S. Geological Survey is actively assessing domestic lithium deposits including lithium-bearing pegmatites in the Appalachian orogen. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical, and mineral occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. Estimates were then integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was used to estimate the amount of potentially recoverable undiscovered resources. Preliminary computations for the northern Appalachians, including application of the economic filter to the median recoverable contained resource, yields 900,000 metric tons of Li 2 O that correspond to enough Li 2 O to replace 127 years of import reliance at the current rate (7,100 t Li 2 O/yr; USGS, 2025). For the southern Appalachians, preliminary computations yielded 1,430,000 metric tons of Li 2 O, which corresponds to 201 years of import reliance.

Alabama, Connecticut, Delaware, Georgia, Maine, Ma↗

USGS2024

Tungsten skarn quantitative mineral resource assessment and gold, rare earth elements, graphite, and uranium qualitative assessments of the Kuldjuktau and Auminzatau Ranges, in the central Kyzylkum region, Uzbekistan

A new quantitative mineral resource assessment for tungsten skarn was conducted for the Auminzatau and Kuldjuktau mountain ranges in Central Uzbekistan, along with qualitative assessments of orogenic gold, rare earth elements (REEs), amorphous graphite, and uranium. By integrating a variety of geological, geochemical, geophysical, and remote sensing data sets, estimates of undiscovered tungsten skarn deposits in permissive tracts are combined with grade and tonnage distributions of known deposits to generate probabilistic estimates of undiscovered resources. Undiscovered deposits in Auminzatau are estimated to contain median resources of 98 thousand metric tons (kt) of WO 3 with a 70 percent (%) probability of at least 28 kt and a 10% probability of at least 468 kt, of which 16 kt to 293 kt may be economic to extract. In Kuldjuktau, the undiscovered deposits are estimated to contain median resources of 27 kt of WO 3 with a 60% probability of at least 12 kt and a 10% probability of at least 208 kt, of which 5 kt to 132 kt may be economic to extract. Our results suggest that the Auminzatau–Kuldjuktau Mountains area is highly prospective for additional discovery of significant Au and U resources and has low prospectivity for discovery of significant REE and graphite resources.

Minerals↗

USGS2025

The Mammoth magnetic anomaly, Pinal County, Arizona

A high-resolution Earth Mapping Resources Initiative airborne geophysical survey was flown in the southwest North American porphyry copper province to improve bedrock geologic maps and to identify areas that have unrecognized critical mineral resource potential. During the review of the aeromagnetic data, a distinctly monopolar-shaped, negative magnetic anomaly was observed at a flight elevation of 200 m above the ground with a maximum amplitude of –9500 nT. We have named this the Mammoth magnetic anomaly (MMA) because it is centered 12 km northeast of the town of Mammoth, Arizona, USA. The total field anomaly (TFA) contour of –500 nT enclosing the MMA defines an elongate shape measuring 2.5 km long by 1 km wide that trends northwest–southeast. Given the striking nature of this negative, monopolar-shaped magnetic anomaly, we conducted a ground campaign in May 2025 to determine its authenticity and potential relationship to critical mineral endowment. The MMA was confirmed on the ground with a TFA approaching –46,000 nT. Total magnetic intensity (TMI) observations routinely fell below the 18,000 nT operating floor of an industry-standard cesium-vapor total field magnetometer, and extremely low TMI measurements were corroborated along coincident traverse lines using two high dynamic range, but lower sensitivity, smartphone vector magnetometers. The lowest TMI values recorded by both smartphone magnetometers were 1000 nT and confirmed with multiple adjacent and crossing lines. Field observations suggest that this magnetic feature is caused by strong remanent magnetization within fine-grained magnetite hosted within locally altered Pinal Schist.

Arizona↗

USGS2026

Mid-Cretaceous porphyritic magmatism in the Beartooth Mountains of the northern Laramide foreland and its connection to Frontier Formation sediment dispersal in Bighorn basin, Montana-Wyoming (USA), and Cordilleran tectonism

Porphyritic intrusions in the southeast Beartooth Mountains and porphyritic cobbles from the Torchlight conglomerate of the Cenomanian Frontier Formation in Bighorn basin (Montana-Wyoming, USA) bear striking resemblance. We utilize geologic mapping, petrography, geochemistry, and geochronology to characterize rocks from both locations and test whether the Beartooth Mountains area was the provenance for Bighorn basin cobbles. Mapping on Line Creek Plateau in the Beartooth Mountains shows three units with porphyritic phenocrysts consisting dominantly of plagioclase, plagioclase + potassium feldspar, and plagioclase + quartz. Petrography shows embayed quartz, opacitic rims, and zoned plagioclase. Geochemistry characterizes the intrusions as trachydacite to trachyte and trace elements exhibit enrichment in light rare earth elements and slight depletion in heavy rare earth elements relative to primitive mantle. Zircon U-Pb dating shows substantial Archean inheritance and ca. 104−92 Ma dates; some samples display multiple mid-Cretaceous date populations. Bighorn basin porphyritic cobbles exhibit similar modal mineralogy, near-identical geochemistry, and Archean inheritance and mid-Cretaceous geochronology. We suggest the porphyritic cobbles were sourced from basement-hosted porphyritic intrusions now exposed in the Beartooth Mountains, given that geochemistry does not agree with coeval volcanic sources along the Frontier Formation depositional fairway (Idaho batholith) or sedimentary-hosted Beartooth Mountains porphyritic sills intruded into Cambrian shale. Stratigraphic evidence does not support kilometer-scale mid-Cretaceous Beartooth Mountains exhumation to expose basement-hosted porphyritic intrusions, and we therefore present a volcanic hypothesis to bring rocks to the surface. This mid-Cretaceous multimillion-year magmatism is unexplained by tectonic models for the north-central Laramide foreland, and thus we further explore the emplacement processes, spatiotemporal significance, and tectonic implications of these rocks.

Montana, Wyoming↗

USGS2025

Young explosive eruptions from the Clear Lake volcanic field

The Clear Lake volcanic field is the northernmost and youngest field in a chain of volcanic fields in and near the California Coast Range mountains. For 2 million years, numerous eruptions have happened around (and through) Clear Lake. The most recent period of activity in the Clear Lake volcanic field probably started around 40,000 years ago and was mainly explosive eruptions concentrated on and near faults in and around the lake. The combination of hot magma and groundwater created explosive releases of hot steam. The craters, called maars, threw out volcanic ash, pumice, and lava fragments, which fell back to the ground and draped the surrounding landscape. The deposits are visible in many places around the southeast end of the lake.

California↗

USGS2025

A high-resolution 3-D P-wave velocity structure of the south-central Cascadia subduction zone from wide-angle shore-crossing seismic refraction data

This study addresses a significant gap in understanding the features of the south-central Cascadia subduction zone, a region characterized by complex geologic, tectonic, and seismic transitions both offshore and onshore. Unlike other segments along this margin, this area lacks a 3-D velocity model to delineate its structural and geological features on a fine scale. To address this void, we developed a high-resolution 3-D P-wave velocity model using active source seismic data from ship-borne seismic shots recorded on temporary and permanent onshore seismic stations and ocean-bottom seismometers. Our model shows velocity variations across the region with distinct velocity-depth profiles for the Siletz, Franciscan, and Klamath terranes in the overlying plate. We identified seaward dipping high-velocity static backstops associated with the Siletz and Klamath terranes, situated near the shoreline and further inland, respectively. Regions of reduced crustal velocity are associated with crustal faults. Moreover, there is significant along-strike depth variation in the subducting slab, which is about 4 km deeper near the thick, dense Siletz terrane and becomes shallower near the predominantly less-dense Franciscan terrane. This highlights a sudden tectonic and geologic transition at the southern boundary of the Siletz terrane. Our velocity model also indicates slightly increased hydration, though still minimal, in both the oceanic crust and the upper mantle of the subducting plate compared to other parts of the margin.

British Columbia, California, Oregon, Washington↗

USGS2026

Thermal detectability of subsurface water ice on Mars: A comparative analysis for the Subsurface Water Ice Mapping (SWIM) Project

We have developed a new global map of shallow ground ice distribution, SWIM23, based on Mars Global Surveyor Thermal Emission Spectrometer data and made systematic comparisons between this new map and two similar, previously developed data products. We have explored the origin of differences between the three ice maps by detailing technical and procedural differences in their development, by making global pixel-by-pixel comparisons, and by carrying out a series of one-dimensional thermal simulations to explore fundamental physical limitations of thermal ice-detection techniques. These efforts and the production of a composite thermal ice-consistency map supported integration of multiple geophysical data products relevant to ice detection in the upper meter of the Martian regolith into the larger Mars Subsurface Water Ice Mapping project. Our work also highlights fundamental physical limitations to thermal ice detection as a technique, particularly the rapid fall-off in ice detection sensitivity at depths >30 cm, which produces maximum uncertainty in the presence and depth of ice within regions preferred for potential human landing sites. A future Mars orbiter mission designed to detect ice and support crewed landing site selection in the midlatitude region should give payload priority to an instrument capable of probing the 1–5 m depth range (i.e., a high-frequency radar), over a next-generation thermal spectrometer, which is unlikely to offer clarity on ice table depths or lateral continuity of the ice table in the locations of highest interest.

Planetary Science Journal↗