SEARCH · Geology Reports

Results for “Journal of Structural Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

USGS2011

Field Reconnaissance Geologic Mapping of the Columbia Hills, Mars: Results from MER Spirit and MRO HiRISE Observations

Chemical, mineralogic, and lithologic ground truth was acquired for the first time on Mars in terrain units mapped using orbital Mars Reconnaissance Orbiter's High Resolution Imaging Science Experiment (MRO HiRISE) image data. Examination of several dozen outcrops shows that Mars is geologically complex at meter length scales, the record of its geologic history is well exposed, stratigraphic units may be identified and correlated across significant areas on the ground, and outcrops and geologic relationships between materials may be analyzed with techniques commonly employed in terrestrial field geology. Despite their burial during the course of Martian geologic time by widespread epiclastic materials, mobile fines, and fall deposits, the selective exhumation of deep and well-preserved geologic units has exposed undisturbed outcrops, stratigraphic sections, and structural information much as they are preserved and exposed on Earth. A rich geologic record awaits skilled future field investigators on Mars. The correlation of ground observations and orbital images enables construction of a corresponding geologic reconnaissance map. Most of the outcrops visited are interpreted to be pyroclastic, impactite, and epiclastic deposits overlying an unexposed substrate, probably related to a modified Gusev crater central peak. Fluids have altered chemistry and mineralogy of these protoliths in degrees that vary substantially within the same map unit. Examination of the rocks exposed above and below the major unconformity between the plains lavas and the Columbia Hills directly confirms the general conclusion from remote sensing in previous studies over past years that the early history of Mars was a time of more intense deposition and modification of the surface. Although the availability of fluids and the chemical and mineral activity declined from this early period, significant later volcanism and fluid convection enabled additional, if localized, chemical activity.

Journal of Geophysical Research E: Planets↗

USGS2016

Reevaluating the age of the Walden Creek Group and the kinematic evolution of the western Blue Ridge, southern Appalachians

An integrated synthesis of existing datasets (detailed geologic mapping, geochronologic, paleontologic, geophysical) with new paleontologic and geochemical investigations of rocks previously interpreted as part of the Neoproterozoic Walden Creek Group in southeastern Tennessee suggest a necessary reevaluation of the kinematics and structural architecture of the Blue Ridge Foothills. The western Blue Ridge of Tennessee, North Carolina, and Georgia is composed of numerous northwest-directed early and late Paleozoic thrust sheets, which record pronounced variation in stratigraphic/structural architecture and timing of metamorphism. The detailed spatial, temporal, and kinematic relationships of these rocks have remained controversial. Two fault blocks that are structurally isolated between the Great Smoky and Miller Cove-Greenbrier thrust sheets, here designated the Maggies Mill and Citico thrust sheets, contain Late Ordovician-Devonian conodonts and stable isotope chemostratigraphic signatures consistent with a mid-Paleozoic age. Geochemical and paleontological analyses of Walden Creek Group rocks northwest and southeast of these two thrust sheets, however, are more consistent with a Late Neoproterozoic (550–545 Ma) depositional age. Consequently, the structural juxtaposition of mid-Paleozoic rocks within a demonstrably Neoproterozoic-Cambrian succession between the Great Smoky and Miller Cove-Greenbrier thrust sheets suggests that a simple foreland-propagating thrust sequence model is not applicable in the Blue Ridge Foothills. We propose that these younger rocks were deposited landward of the Ocoee Supergroup, and were subsequently plucked from the Great Smoky fault footwall as a horse, and breached through the Great Smoky thrust sheet during Alleghanian emplacement of that structure.

North Carolina, Tennessee↗

USGS1978

Giant glacial grooves at the north end of the Mission Range, Northwest Montana

Giant glacial grooves both cut across and wrap around the north end of the Mission Range. Some of these grooves are straight, others crescentic, but all appear to be independent of stratigraphic units and of the gross structure of the range. They were seemingly localized by preexisting stream valleys whose original trends were determined by joints. The grooves are cut in bedrock, U-shaped in cross section, thickly veneered with till, and roughly parallel. Most range in length from 0.5 km to 3.5 km. Each groove maintains a uniform width, but widths range from about 50 in to 275 in. Depths of individual grooves vary widely, ranging from about 10 m to about 60 in. The grooves are probably contemporaneous in age, but their time of formation is uncertain; it seems to have been prior to late Pinedale time but after the pre-Bull Lake glaciations. Of the various interpretations offered to explain their origin, the one that appears to fit most of the facts suggests that those grooves at the northern tip of the mountains were carved by a lobe of the south-flowing Cordilleran ice sheet, whereas those farther south were likely formed by the westward deflection of a north-flowing Swan valley glacier.

Montana↗

USGS2022

High-rate very-long-period seismicity at Yasur volcano, Vanuatu: source mechanism and decoupling from surficial explosions and infrasound

Yasur volcano, Vanuatu is a continuously active open-vent basaltic-andesite stratocone with persistent and long-lived eruptive activity. We present results from a seismo-acoustic field experiment at Yasur, providing locally dense broad-band seismic and infrasonic network coverage from 2016 July 27 to August 3. We corroborate our seismo-acoustic observations with coincident video data from cameras deployed at the crater and on an unoccupied aircraft system (UAS). The waveforms contain a profusion of signals reflecting Yasur’s rapidly occurring and persistent explosive activity. The typical infrasonic signature of Yasur explosions is a classic short-duration and often asymmetric explosion waveform characterized by a sharp compressive onset and wideband frequency content. The dominant seismic signals are numerous repetitive very-long-period (VLP) signals with periods of ∼2–10 s. The VLP seismic events are ‘high-rate’, reoccurring near-continuously throughout the data set with short interevent times (∼20–60 s). We observe variability in the synchronization of seismic VLP and acoustic sources. Explosion events clearly delineated by infrasonic waveforms are underlain by seismic VLPs. However, strong seismic VLPs also occur with only a weak infrasonic expression. Multiplet analysis of the seismic VLPs reveals a systematic progression in the seismo-acoustic source decoupling. The same dominant seismic VLP multiplet occurs with and without surficial explosions and infrasound, and these transitions occur over a timescale of a few days during our field campaign. We subsequently employ template matching, stacking, and full-waveform inversion to image the source mechanism of the dominant VLP multiplet. Inversion of the dominant VLP multiplet stack points to a composite source consisting of either a dual-crack (plus forces) or pipe-crack (plus forces) mechanism. The derived mechanisms correspond to a point-source directly beneath the summit vents with centroid depths in the range ∼900–1000 m below topography. All mechanisms suggest a northeast trending crack dipping relatively shallowly to the northwest and indicate a VLP source centroid and mechanism controlled by a stable structural geologic feature beneath Yasur. We interpret the results in the framework of gas slug ascent through the conduit responsible for Yasur explosions. The VLP mechanism and timing with infrasound (when present) are explained by a shallow-buffered top-down model in which slug ascent is relatively aseismic until reaching the base of a shallow section. Slug disruption in this shallow zone triggers a pressure disturbance that propagates downward and couples at the conduit base (VLP centroid). If the shallow section is open, an explosion propagates to the surface, producing infrasound. In the case of (the same multiplet) VLPs occurring without surficial explosions and weak or no infrasound, the decoupling of the dominant VLPs at ∼900–1000 m depth from surficial explosions and infrasound strongly indicates buffering of the terminal slug ascent. This buffering could be achieved by a variety of conditions at or directly beneath the vents, such as a high-viscosity layer of crystal-rich magma, a debris cap from backfill, a foam layer, or a combination of these. The dominant VLP at Yasur captured by our experiment has a source depth and mechanism separated from surface processes and is stable over time.

Geophysical Journal International↗

USGS2012

Structural evidence for northeastward movement on the Chocolate Mountains Thrust, southeasternmost California

The Late Cretaceous Chocolate Mountains thrust of southeastern California and southwestern Arizona places a block of Proterozoic and Mesozoic continental crust over the late Mesozoic continental margin oceanic sedimentary and volcanic rocks of the regionally distinctive Orocopia Schist. The Chocolate Mountains thrust is interpreted as a thrust (burial, subduction) fault rather than a low-angle normal (exhumation, unroofing, uplift) fault. An important parameter required to understand the tectonic significance of the Chocolate Mountains and related thrusts is their sense of movement. The Chocolate Mountains thrust zone contains sparse to locally abundant mesoscopic asymmetric folds. Fabric relations, supported by regional geologic evidence, indicate that these folds are an integral part of and coeval with the thrust zone. On a lower hemisphere equal-area plot representing the orientation and sense of asymmetry of 80 thrust zone folds from 36 localities, spread over an area 60 by 10 km, Z folds plot northwest of and S folds plot southeast of a northeast-southwest striking vertical plane of overall monoclinic symmetry. The only sense of movement consistent with the collective asymmetry of the thrust zone folds is top to the northeast. Asymmetric microstructures studied at several localities also indicate top to the northeast movement. Paleomagnetic data suggest that the original sense of thrusting, prior to Neogene vertical axis tectonic rotation related to the San Andreas fault system, was northward. The essential point is that movement of the upper plate of the Chocolate Mountains thrust evidently was continentward. Continentward thrusting suggests a tectonic scenario in which an insular or peninsular microcontinental fragment collided with mainland southern California. The suture predicted by this model is elusive; but the Chocolate Mountains thrust and underlying Orocopia Schist themselves may represent the suture, at the present level of exposure. Alternative tectonic models involving subduction of the Orocopia Schist eastward beneath continental southern California circumvent the suture problem but are presently not supported by any direct structural evidence.

Journal of Geophysical Research↗

USGS2012

Seismic refraction measurements within the Peninsular terrane, south central Alaska

We present an interpretation of crustal seismic refraction data from the Peninsular terrane, one of the many exotic terranes that have been accreted to the continental margin of southern Alaska in the past 200 m.y. A seismic refraction line was collected along the Glenn Highway in the Copper River Basin of south central Alaska in 1984 and 1985, as part of the U.S. Geological Survey Trans‐Alaska Crustal Transect (TACT) program. P wave velocities of 2.7–3.5 km/s and thicknesses of 1–2 km characterize post‐Lower Jurassic sedimentary rocks that underlie most of the seismic refraction line. An average crustal velocity structure includes the following five velocity divisions. Beneath the sedimentary rocks lie 1–2 km of 4.0–4.6 km/s materials, correlating with andesitic volcaniclastic sedimentary rocks and lava flows of the Lower Jurassic Talkeetna Formation. Below these rocks, seismic velocity increases rapidly, from 5.0 to 6.1 km/s, in 2–3 km. At 7–8 km depth, velocity jumps to 6.3 km/s and increments to 6.6 km/s by 10–12 km depth. Velocities increase from 6.8 to 7.0 km/s between 12 to 20 km depth. At about 22 km depth, a jump in velocity from 7.0 to 7.4 km/s is inferred but is poorly resolved. Depth to the Moho discontinuity could not be determined from our data. The absence of clear PmP reflections may indicate that Moho is deeper than 40 km. Data from two offset shotpoints northeast of the line and within the Wrangellia terrane constrain the deep structure transition between Peninsular and Wrangellia terranes. The 6.3–6.6 km/s material thickens to the northeast, toward the suture between Peninsular and Wrangellia terranes, but southwest of its mapped trace at the West Fork fault. Peninsular terrane crustal structure appears dissimilar to that of continental interiors. It is similar to velocity structures determined for accreted island arc fragments in California, such as the basement of the Great Valley and the Klamath Mountains.

Alaska↗

USGS1962

Lower temperature terminations of the three-phase region plagioclase-alkali feldspar-liquid

Geological and experimental evidence indicate that the three-phase field, plagioclase-alkalifeldspar-liquid, may terminate in several different ways. The possible terminations have been developed from Schreinemakers' rules governing the disappearance of three-phase fields. In igncous rocks, these different terminations may arise from variations in the relative amounts of additional components in magmas, or from changes of total pressure, or from structural changes that effect the extent of solid solution in feldspar.The three-phase region originates from the intersection of the solidus and the feldspar solvus. The available evidence regarding this intersection is reviewed, as is the evidence for the existence and form of the boundary curve on the feldspar liquidus. The data are used to project a series of isobaric polythermal and isobaric isothermal diagrams for each possible termination . Subsequent discussions relate the theoretical arguments to the natural evidence, suggest the more probable geological environments of some of the terminations , and indicate characteristic features of each termination .It may be possible to identify the type of termination involved in the crystallization of some rocks. The necessary data are the amounts and compositions of both kinds of coexisting feldspars and of the feldspar components of the coexisting liquid at one or more stages of the crystallization process. Volcanic rocks are most suitable for such studies.The terminations explain many of the compositional relationships possible between feldspar crystals and silicate melt under geological and experimental conditions. These compositional relationships are fundamental to understanding the crystallization of igneous rocks and the formation of melts by partial fusion. Other geological applications include a simple explanation for some resorbed feldspars, the separation, correlation, and comparison of porphyritic rock units, interpretation of compositional changes of successive zones of zoned feldspars, and mantling of one feldspar by another. With all types of termination , extensive fractionation yields a liquid rich in Or and Ab that may crystallize to alkali feldspar or feldspars.

Journal of Petrology↗

USGS2019

Crustal magmatism and anisotropy beneath the Arabian Shield - A cautionary tale

Volcanism in Saudi Arabia includes a historic eruption close to the holy city of Al Madinah. As part of a volcanic hazard assessment of this area, magnetotelluric (MT) data were collected to investigate the structural setting, the distribution of melt within the crust, and the mantle source of volcanism. Interpretation of a new 3‐D resistivity model includes a shallow graben beneath thin lava fields (Harrats), a melt‐free upper crust, and decompression melting in the asthenosphere below thin lithosphere. Within the lower crust the model images elongate conductivity anomalies, one of which was attributed in a previous MT study to melt. The regional MT data, combined with perspective from geology and geophysical modeling, suggest the lower crust is anisotropic with no interconnected melt zones. These divergent interpretations have distinct hazard implications and highlight the importance of large survey aperture and anisotropic modeling to MT studies of volcanic regions. Lower‐crustal anisotropy extends beyond the Harrat, with the most conductive direction oriented N10°E and a factor of 3–5, determined from 2‐D anisotropic inversion, between the most and least conductive directions. The enhanced conductivity is likely due to interconnected grain boundary graphite, while the anisotropy direction reflects either frozen‐in fabric from Neoproterozoic stabilization of the Arabian Shield or modern ductile deformation driven by channelized asthenospheric flow coupled through a thin rigid mantle lid. Asthenospheric melt is interpreted to transect the crust primarily through diking, with limited melt storage and short residence times in the crust.

Arabian Shield↗

USGS1999

Three-dimensional velocity structure of Siletzia and other accreted terranes in the Cascadia forearc of Washington

Eocene mafic crust with high seismic velocities underlies much of the Oregon and Washington forearc and acts as a backstop for accretion of marine sedimentary rocks from the obliquely subducting Juan de Fuca slab. Arc-parallel migration of relatively strong blocks of this terrane, known as Siletzia, focuses upper crustal deformation along block boundaries, which are potential sources of earthquakes. In a three-dimensional velocity model of coastal Washington, we have combined surface geology, well data, and travel times from earthquakes and controlled source seismic experiments to resolve the major boundaries of the Siletz terrane with the adjacent accreted sedimentary prism and volcanic arc. In southern Washington and northern Oregon the Siletz terrane appears to be a thick block (???20 km) that extends west of the coastline and makes a high-angle contact with the offshore accreted sedimentary prism. On its east flank the high-velocity Siletz terrane boundary coincides with an en echelon zone of seismicity in the arc. In northern Washington the western edge of Siletzia makes a lower-angled, fault-bound contact with the accretionary prism. In addition, alternating, east-west trending uplifts and downwarps of the Siletz terrane centered on the antiformal Olympic Mountains may reflect focusing of north-south compression in the northern part of the Siletz terrane. This compressional strain may result from northward transport and clockwise rotation of the Siletz terrane into the relatively fixed Canadian Coast Mountains restraining bend along the coast.

Oregon, Washington↗

USGS2012

Seismic reflection/refraction mapping of faulting and regional dips in the eastern Alaska Range

We present the results of a Trans‐Alaska Crustal Transect (TACT) investigation of the upper 2–5 km of the eastern Alaska Range in the vicinity of the Denali fault based on seismic reflection/refraction data, laboratory measurements of rock velocities, and structural mapping. The Denali fault is a major dextral slip structure mappable for more than 2000 km separating the Wrangellia and adjacent terranes to the south from the Yukon‐Tanana and adjacent terranes to the north. Geologic mapping suggests over 400 km of dextral slip has occurred on the fault, yet within the upper 1.5 km of the crust along the TACT corridor, basement rocks juxtaposed along the Denali fault reveal no significant seismic velocity differences, although the fault zone itself is associated with a minor lowering of velocity. The lack of seismic velocity contrast adjacent to the fault is in agreement with laboratory measurements of elastic wave velocities of samples from terranes bordering the fault. Laboratory measurements of elastic wave velocities of the metasedimentary mica‐quartz schists comprising the Yukon‐Tanana basement are highly anisotropic because of preferred orientation of mica and predict significant variations in velocity accompanying variations in foliation dip. Although other interpretations are possible, the northward shallowing of foliation dip of basement rocks in the Yukon‐Tanana terrane combined with the strong anisotropy associated with these highly foliated rocks can explain an observed northward increase in seismic velocity within this terrane. Seismic reflections from basement rocks within the Yukon‐Tanana terrane may originate from variations in anisotropy with depth and/or changes in composition reflecting different proportions of sandstone and shale in the protolith.

Alaska↗

USGS1996

Crustal structure of the Colorado Plateau, Arizona: Application of new long-offset seismic data analysis techniques

The Colorado Plateau is a large crustal block in the southwestern United States that has been raised intact nearly 2 km above sea level since Cretaceous marine sediments were deposited on its surface. Controversy exists concerning the thickness of the plateau crust and the source of its buoyancy. Interpretations of seismic data collected on the plateau vary as to whether the crust is closer to 40 or 50 km thick. A thick crust could support the observed topography of the Colorado Plateau isostatically, while a thinner crust would indicate the presence of an underlying low-density mantle. This paper reports results on long-offset seismic data collected during the 1989 segment of the U.S. Geological Survey Pacific to Arizona Crustal Experiment that extended from the Transition Zone into the Colorado Plateau in northwest Arizona. We apply two new methods to analyze long-offset data that employ finite difference travel time calculations: (1) a first-arrival time inverter to find upper crustal velocity structure and (2) a forward-modeling technique that allows the direct use of the inverted upper crustal solution in modeling secondary reflected arrivals. We find that the crustal thickness increases from 30 km beneath the metamorphic core complexes in the southern Basin and Range province to about 42 km beneath the northern Transition Zone and southern Colorado Plateau margin. We observe some crustal thinning (to ∼37 km thick) and slightly higher lower crustal velocities farther inboard; beneath the Kaibab uplift on the north rim of the Grand Canyon the crust thickens to a maximum of 48 km. We observe a nonuniform crustal thickness beneath the Colorado Plateau that varies by ∼15% and corresponds approximately to variations in topography with the thickest crust underlying the highest elevations. Crustal compositions (as inferred from seismic velocities) appear to be the same beneath the Colorado Plateau as those in the Basin and Range province to the southwest, implying that the plateau crust represents an unextended version of the Basin and Range. Some of the variability in crustal structure appears to correspond to preserved lithospheric discontinuities that date back to the Proterozoic Era.

Journal of Geophysical Research B: Solid Earth↗

USGS2021

Stratigraphic and structural controls on groundwater salinity variations in the Poso Creek Oil Field, Kern County, California, USA

Groundwater total dissolved solids (TDS) distribution was mapped with a three-dimensional (3D) model, and it was found that TDS variability is largely controlled by stratigraphy and geologic structure. General TDS patterns in the San Joaquin Valley of California (USA) are attributed to predominantly connate water composition and large-scale recharge from the adjacent Sierra Nevada. However, in smaller areas, stratigraphy and faulting play an important role in controlling TDS. Here, the relationship of stratigraphy and structure to TDS concentration was examined at Poso Creek Oil Field, Kern County, California. The TDS model was constructed using produced water TDS samples and borehole geophysics. The model was used to predict TDS concentration at discrete locations in 3D space and used a Gaussian process to interpolate TDS over a volume. In the overlying aquifer, TDS is typically <1,000 mg/L and increases with depth to ~1,200–3,500 mg/L in the hydrocarbon zone below the Macoma claystone—a regionally extensive, fine-grained unit—and reaches ~7,000 mg/L in isolated places. The Macoma claystone creates a vertical TDS gradient in the west where it is thickest, but control decreases to the east where it pinches out and allows freshwater recharge. Previously mapped normal faults were found to exhibit inconsistent control on TDS. In one case, high-density faulting appears to prevent recharge from flushing higher-TDS connate water. Elsewhere, the high-throw segments of a normal fault exhibit variable behavior, in places blocking lower-TDS recharge and in other cases allowing flushing. Importantly, faults apparently have differential control on oil and groundwater.

California↗

USGS2020

Geological and thermal control of the hydrothermal system in northern Yellowstone Lake: Inferences from high resolution magnetic surveys

A multiscale magnetic survey of the northern basin of Yellowstone Lake was undertaken in 2016 as part of the Hydrothermal Dynamics of Yellowstone Lake Project (HD‐YLAKE)—a broad research effort to characterize the cause‐and‐effect relationships between geologic and environmental processes and hydrothermal activity on the lake floor. The magnetic survey includes lake surface, regional aeromagnetic, and near‐bottom autonomous underwater vehicle (AUV) data. The study reveals a strong contrast between the northeastern lake basin, characterized by a regional magnetic low punctuated by stronger local magnetic lows, many of which host hydrothermal vent activity, and the northwestern lake basin with higher‐amplitude magnetic anomalies and no obvious hydrothermal activity or punctuated magnetic lows. The boundary between these two regions is marked by a steep gradient in heat flow and magnetic values, likely reflecting a significant structure within the currently active ~20‐km‐long Eagle Bay‐Lake Hotel fault zone that may be related to the ~2.08‐Ma Huckleberry Ridge caldera rim. Modeling suggests that the broad northeastern magnetic low reflects both a shallower Curie isotherm and widespread hydrothermal activity that has demagnetized the rock. Along the western lake shoreline are sinuous‐shaped, high‐amplitude magnetic anomaly highs, interpreted as lava flow fronts of upper units of the West Thumb rhyolite. The AUV magnetic survey shows decreased magnetization at the periphery of the active Deep Hole hydrothermal vent. We postulate that lower magnetization in the outer zone results from enhanced hydrothermal alteration of rhyolite by hydrothermal condensates while the vapor‐dominated center of the vent is less altered.

Wyoming↗

USGS2000

Geologic mapping of Europa

Galileo data enable the major geological units, structures, and surface features to be identified on Europa. These include five primary units (plains, chaos, band, ridge, and crater materials) and their subunits, along with various tectonic structures such as faults. Plains units are the most widespread. Ridged plains material spans a wide range of geological ages, including the oldest recognizable features on Europa, and appears to represent a style of tectonic resurfacing, rather than cryovolcanism. Smooth plains material typically embays other terrains and units, possibly as a type of fluid emplacement, and is among the youngest material units observed. At global scales, plains are typically mapped as undifferentiated plains material, although in some areas differences can be discerned in the near infrared which might be related to differences in ice grain size. Chaos material is composed of plains and other preexisting materials that have been severely disrupted by inferred internal activity; chaos is characterized by blocks of icy material set in a hummocky matrix. Band material is arrayed in linear, curvilinear, wedge-shaped, or cuspate zones with contrasting albedo and surface textures with respect to the surrounding terrain. Bilateral symmetry observed in some bands and the relationships with the surrounding units suggest that band material forms by the lithosphere fracturing, spreading apart, and infilling with material derived from the subsurface. Ridge material is mapped as a unit on local and some regional maps but shown with symbols at global scales. Ridge material includes single ridges, doublet ridges, and ridge complexes. Ridge materials are considered to represent tectonic processes, possibly accompanied by the extrusion or intrusion of subsurface materials, such as diapirs. The tectonic processes might be related to tidal flexing of the icy lithosphere on diurnal or longer timescales. Crater materials include various interior (smooth central, rough inner, and annular massif) and exterior (continuous ejecta) subunits. Structural features and landforms are shown with conventional symbols. Type localities for the units are identified, along with suggestions for portraying the features on geological maps, including colors and letter abbreviations for material units. Implementing these suggestions by the planetary mapping community would facilitate comparisons of maps for different parts of Europa and contribute to an eventual global synthesis of its complex geology. On the basis of initial mapping results, a stratigraphic sequence is suggested in which ridged plains form the oldest unit on Europa, followed by development of band material and individual ridges. Band materials tend to be somewhat older than ridges, but in many areas the two units formed simultaneously. Similarly, the formation of most chaos follows the development of ridged plains; although chaos is among the youngest materials on Europa, some chaos units might have formed contemporaneously with ridged plains. Smooth plains generally embay all other units and are late-stage in the evolution of the surface. C1 craters are superposed on ridged plains but are crosscut by other materials, including bands and ridges. Most c2 craters postdate all other units, but a few c2 craters are cut by ridge material. C3 craters constitute the youngest recognizable material on Europa. Copyright 2000 by the American Geophysical Union.

Journal of Geophysical Research E: Planets↗

USGS1993

Flow recommendations for maintaining riparian vegetation along the Upper Missouri River, Montana

Montana Power Company, Inc. (MPC) submitted a final license application to the Federal Energy Regulatory Commission (FERC) on November 30, 1992. In this application, MPC proposed a plan for the protection of fish, wildlife, habitat, and water-quality resources. One concern was maintenance of woody riparian vegetation along the Missouri River, especially along the Wild and Scenic reach of the river, where the riparian forest occurs in relatively small discontinuous stands. The objectives of this project were 1) to recommend flows that would protect and enhance riparian forests along the Missouri River, and 2) to develop elements of an environmental monitoring program that could be used to assess the effectiveness of the recommended flows. Plains cottonwood ( Populus deltoides subsp. monilifera ) is the key structural component of riparian forests along the Missouri River. Therefore, we focused our analysis on factors affecting populations of this species. Previous work had demonstrated that the age structure of cottonwood populations is strongly influenced by aspects of flow that promote successfully establishment. In this study our approach was to determine the precise age of plains cottonwood trees growing along the Upper Missouri River and to relate years of establishment to the flow record. Our work was carried out between Coal Banks Landing and the Fred G. Robinson Bridge within the Wild and Scenic portion of the Missouri River. This segment of the river occupies a narrow valley and exhibits little channel migration. Maps and notes from the journals of Lewis and Clark (1804-1806) suggest that the present distribution and abundance of cottonwoods within the study reach is generally similar to presettlement conditions. Flows in the study reach are influenced by a number of dams and diversions, most importantly, Canyon Ferry and Tiber Dams. Although flow regulation has decreased peak flows and increased low flows, the gross seasonal pattern of flow has not been greatly altered. Most cottonwood establishment in our study reach occurred in years with a peak mean daily flow greater than 1,400 m 3 /s (49,434 cfs), or in the two years following such a flow. These years include 35 out of the 111 years of record, and account for establishment of 47 of 60 trees examined, a highly significant relationship. Infrequent establishment of cottonwood trees is not the result of scarcity of seed or seedlings. In the study reach seedlings become established most years on bare, relatively low surfaces deposited by the river. However, the high elevation of establishment of all trees dating to before 1978 indicates that only individuals established on high flood deposits are able to survive subsequent floods and ice jams. In order to maintain the present abundance of plains cottonwood in the study area we recommend flood flows in excess of 1,400 m 3 /s (49,434 cfs) measures as mean daily discharge at Fort Benton (U.S. Geological Survey gage 06090800) with a recurrence interval of approximately 9 years. Because cottonwood seeds remain viable for only a few weeks, and because seedling require a moist, bare surface, we further recommend maintenance of the historic timing of flooding with peak flood flows occurring between mid-May and late-June. Flow is not the only factor influencing cottonwood regeneration along this reach of the Missouri River. Land management, especially cattle grazing, is clearly having an impact, and changes in cottonwood populations could be expected if these practices were altered. However, the dependence of cottonwood establishment on high flow is clear in this reach in spite of the effects of other factors. Given the value of the resource, we strongly suggest establishment of a monitoring program to determine the effectiveness of the recommended flows and to provide the data necessary for refining them. We recommend a monitoring program that would include: 1) ten permanent, widely space channel cross sections for annual measurement of channel geometry and cottonwood establishment, growth, and survival; 2) five livestock enclosures to monitor the influence of grazing in the study area; and 3) low-elevation aerial photography of the reach every five years and after every flood to detect changes in channel geometry and forested area. Because cottonwood establishment is episodic, a long-term commitment to the monitoring effort is essential. In addition, cross sections and exclosures should be easy enough to access that measurements during flood years are possible.

Montana↗

USGS2002

SHRIMP and Conventional UPb ages of Ordovician granites and tonalites in the central Appalachian Piedmont: Implications for Paleozoic tectonic events

Discordant Cambrian U-Pb ages of questionable reliability for metamor-phosed plutonic rocks in the central Appalachian Piedmont of northern Virginia, Maryland, and the District of Columbia have led to different regional geologic interpretations and controversies. In this study, we use the sensitive high resolution ion microprobe (SHRIMP) for dating 25-m diameter areas on individual zircons from Piedmont granitoids in an effort to resolve previous controversial ages. Cathodoluminescence images of zoning within the zircons are used to select pristine areas of cores and overgrowths for dating and to help interpret the results. For comparison, hand-picked fractions of zircons from most of the samples were also dated by the conventional isotope dilution thermal ionization mass spectrometry (TIMS) U-Pb method. The combined SHRIMP and TIMS results of this study demonstrate that the Dale City Quartz Monzonite, Norbeck Intrusive Suite, Kensington Tonalite, Goldvein pluton, Lake Jackson pluton, Falls Church Intrusive Suite, Occoquan Granite (main batholith and satellite Bull Run Marina pluton), Georgetown Intrusive Suite, Dalecarlia Intrusive Suite, and related granitoids are parts of an extensive Early to Middle Ordovician magmatic arc. Emplacement of these plutons from about 485 to 450 Ma generally was contemporaneous with major regional deformation and metamorphism, called the Taconic orogeny in rocks of the northern Appalachians. The Ordovician ages supersede most of the discordant Cambrian(?) to Neoproterozoic dates that previously suggested a Potomac or Penobscot orogeny in Piedmont rocks of the Potomac Valley, raising questions about the nature and timing of that event. The Devonian Guilford Granite crosscuts all structures, providing a minimum age for these Paleozoic events.

Virginia, Maryland↗

USGS2023

Predicting methane emissions and developing reduction strategies for a Central Appalachian Basin, USA, longwall mine through analysis and modeling of geology and degasification system performance

Coal mine methane is a safety concern in active mines due to explosion risk and an environmental concern due to the greenhouse gas (GHG) properties of methane emissions to the atmosphere. Depending on the mine design and operation, structural and stratigraphic characteristics of the geology, and the properties of coal beds affected by mining, a significant amount of methane can be released during coal extraction. These emissions may be low and uniform, but they also can be high and abrupt, if not captured by using pre- and post-mining methods of degasification or not controlled by ventilation during mining. Therefore, emissions should be monitored and predicted accurately for underground safety and GHG reduction. Ventilation and degasification systems should be designed accordingly by taking into account the mine geological properties and the degasification system's performance. This paper presents a comprehensive study to predict emissions and proposes alternatives to reduce emissions in a longwall mine extracting metallurgical coal from the Pocahontas No. 3 coal bed in Virginia (Central Appalachian Basin), USA. The work focused on mining activity in four adjacent panels through analysis and modeling of geology and evaluation of the performance of the methane control system. Results showed that the mine geology contained a significant amount of gas within and around the panel areas, which was controlled by utilizing different degasification methods besides ventilation during mining. The study showed that after pre-mining degasification using fractured vertical wells and in-seam horizontal wells, each panel potentially contained ∼19 MMscf and ∼ 2 MMscf of gas remaining to be handled by the gob gas ventholes (GGVs) and the ventilation, respectively, per acre of mining. It was shown that extending the pre-mining degasification duration of vertical wells by as much as 4 years or drilling more horizontal wells with closer spacing could significantly reduce ventilation and gob emissions during the mining of coal.

Kentucky, Virginia, West Virginia↗

USGS2016

Magnetotelluric investigation of the Vestfold Hills and Rauer Group, East Antarctica

The Vestfold Hills and Rauer Group in East Antarctica have contrasting Archean to Neoproterozoic geological histories and are believed to be juxtaposed along a suture zone that now lies beneath the Sørsdal Glacier. Exact location and age of this suture zone are unknown, as is its relationship to regional deformation associated with the amalgamation of East Gondwana. To image the suture zone, magnetotelluric (MT) data were collected in Prydz Bay, East Antarctica, mainly along a profile crossing the Sørsdal Glacier and regions inland of the Vestfold Hills and Rauer Group islands. Time-frequency analysis of the MT time series yielded three important observations: (1) Wind speeds in excess of &sim;8 m/s reduce coherence between electric and magnetic fields due to charged wind-blown particles of ice and snow. (2) Estimation of the MT transfer function is best between 1000 and 1400 UT when ionospheric Hall currents enhance the magnetic source field. (3) Nonplanar source field effects were minimal but detectable and removed from estimation of the MT transfer function. Inversions of MT data in 2-D and 3-D produce similar resistivity models, where structures in the preferred 3-D resistivity model correlate strongly with regional magnetic data. The electrically conductive Rauer Group is separated from the less conductive Vestfold Hills by a resistive zone under the Sørsdal Glacier, which is interpreted to be caused by oxidation during suturing. Though a suture zone has been imaged, no time constrains on suturing can be made from the MT data.

Journal of Geophysical Research B: Solid Earth↗