SEARCH · Geology Reports

Results for “Hydrological Processes”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

536 records · Page 16Linked to original sources

USGS2024

Iodine-129 in the eastern Snake River Plain aquifer at and near the Idaho National Laboratory, Idaho, 2021–22

Between the 1950s and 1980s, wastewater generated at the Idaho National Laboratory contained Iodine-129 ( 129 I); this wastewater was discharged directly into the eastern Snake River Plain (ESRP) aquifer through a deep disposal well, unlined infiltration ponds, or leaked from distribution systems below industrial facilities. During 2021–22, the U.S. Geological Survey, in cooperation with the U.S. Department of Energy and the Idaho Department of Environmental Quality Idaho National Laboratory Oversight Program, collected groundwater samples from 64 monitoring wells in the ESRP aquifer, 6 of which are part of a multilevel monitoring system, to determine the concentration of 129 I in the groundwater. These samples were analyzed by accelerator mass spectrometry as part of a long-term ongoing study to track trends and occurrences of this carcinogenic, long-lived radionuclide in the environment. Concentrations ranged from slightly above the locally determined background concentration of 5.4×10 −6 picocuries per liter, to just below the U.S. Environmental Protection Agency’s maximum contaminant level of 1 picocurie per liter. Discharge of wastewater containing 129 I has been discontinued to the aquifer, and long-term trends from a subset (n=15) of sampled wells show decreasing 129 I concentrations over the last three decades. Concentrations of 129 I in groundwater from monitoring wells near facilities at the Idaho National Laboratory are affected by episodic recharge from an ephemeral surface-water source and by the fracture-flow dominated hydrologic regime in the ESRP aquifer. The spatially focused sampling effort has also identified a low-level 129 I plume that affects long-term water quality near and downgradient from the Advanced Test Reactor Complex in the southwestern part of the facility that had not been clearly defined in previous sampling efforts, although the definition of the plume is somewhat limited by available data.

Idaho↗

USGS2026

Hydrothermal manganese-oxide mineralization of a carbonate ooze, Samoan hotspot region, South Pacific Ocean

Low-temperature hydrothermal manganese oxides occur throughout the global oceans. However, the hydrothermal replacement of a carbonate ooze by manganese oxides is described here for the first time. The 24 samples dredged from three locations around the Territory of American Samoa in the South Pacific Ocean include six samples with remnant carbonate and volcaniclastic sediments, which we refer to as “low Mn,” and 18 samples in which the mineralization is pervasive and has replaced most original sediment, termed “high Mn.” The 18 high-Mn samples exhibit a mean Mn content of 51 wt.%. Higher Li and Mn contents and lower Fe contents in the high-Mn samples indicate a hydrothermal origin and distinguish these samples from hydrogenetic ferromanganese crusts. Mn-oxide layers are up to 90 mm thick, some with columns to 44 mm long and 10 mm wide, the magnitude of which has not been described previously. Samples are composed of birnessite and 10 Å phyllomanganate minerals. Textures of the thickest Mn layers indicate mineralization below the seabed from ascending fluids during multiple hydrothermal pulses. Mineralization took place by complete to partial replacement and cementation of foraminiferal sediments intermixed with volcaniclastic sediments in varying amounts. Our results highlight the production of carbonate sediment-hosted hydrothermal Mn oxides from multiple hydrothermal sources within the Samoan volcanic chain. The potential extensive distribution on the regional scale of this newly described mineralization process and unique element enrichments raise questions about its broader distribution globally and potential importance to hydrothermal processes, element mass balance, and seabed mineral resources.

Geochemistry, Geophysics, Geosystems↗

USGS2024

From exploration to production: Understanding the development dynamics of lithium mining projects

Recently, there has been considerable recent controversy whether current and new lithium mines will be able to supply the rapidly growing needs of the electromobility transition. Mineral exploration projects are typically active for many years, and only some become operational mines. From exploration to production, the projects go through several stages of characterisation and evaluation. At each stage, decisions are made by companies and stakeholders to advance, continue or stop the project. This is a complex process, and even projects with very similar geological and technical characteristics may take very different trajectories, depending on external factors such as global market conditions and local regulatory environments. The present study investigates the dynamics of this process for lithium exploration projects. A global database of 397 lithium projects was compiled, covering their progression through major development stages between 2004 and 2022. Ordinal logistic regression was used for the statistical analysis of this data. Different explanatory variables were tested, including economic, geological, technical, and geographic factors, to identify the best predictors for project progress at each development stage. The results suggest an essential role for lithium carbonate prices, and a variable role for other factors at each stage. Critically, the already elapsed lead time and project economics, which are traditionally considered important for the prediction of the start-up of individual mines, do not appear to be relevant in all cases. The results provide important insights into the dynamics of lithium supply and may eventually allow more realistic forecasts to be made for future lithium market dynamics.

Resources Policy↗

USGS2025

Generalized Bancroft algorithm for locating earthquakes with P- and S-wave arrival times

Because of similarities between locating an earthquake with seismic stations and locating a Global Positioning System (GPS) receiver from satellites, the Bancroft algorithm developed for GPS processing can be used to locate earthquakes. Such an approach to earthquake location differs from the conventional method of choosing an initial or trial solution and then iteratively improving the solution until convergence. The Bancroft algorithm has the advantage of being a direct, noniterative solution but with the disadvantage of only being able to accommodate a homogeneous velocity model. An additional limitation of the standard Bancroft algorithm is that it considers arrival times in a medium with a single propagation velocity. This poses no problem for GPS processing because electromagnetic waves travel at the speed of light; however, for seismic waves it means the algorithm can be applied to collections of either P ‐ or S ‐wave arrival times. Here, I show how the Bancroft algorithm can be generalized to handle both P ‐ and S ‐wave arrival‐time measurements simultaneously. I also show how to accommodate depth‐varying P ‐ and S ‐wave velocity models. I apply the generalized Bancroft algorithm to microearthquakes beneath Tanaga Volcano in Alaska and compare standard locations from the widely used HYPOINVERSE location code to Bancroft locations and to the output of HYPOINVERSE when setting the trial location to the Bancroft location. I find the Bancroft locations outperform the results from the other methods for shallow earthquakes near sea level, where a quantity known as the geometric dilution of precision is large and linearized approaches such as HYPOINVERSE are expected to struggle.

Alaska↗

USGS1992

Description and effects of 1988 drought on ground-water levels, streamflow, and reservoir levels in Indiana

Documentation of the 1988 drought in Indiana was undertaken to aid water-management agencies and planners concerned with periods of below-normal precipitation and their effect on commercial, agricultural, and residential water use. Precipitation, temperature, Palmer Drought Severity Indices, and ground- and surface-water levels from water years 1988 and 1989 were compared to the historical record to evaluate severity, extent, and duration of the 1988 drought in Indiana. Three types of drought-climatological, hydrologic, and agricultural--occurred in most of Indiana during water years 1988 and 1989. The drought began toward the end of calendar year 1987 as annual precipitation decreased to 4.6 inches below the long term mean. By the end of September 1988, statewide precipitation deficits had increased to almost 8 inches below normal. High temperatures during the summer months increased the stress on crops, livestock, and people. Northwest Indiana experienced the second warmest June-August on record. Palmer Drought Severity Indices indicated that a moderate-to-severe drought had occurred in Indiana during most of 1988. Ground-water levels were affected substantially in many areas of the State. Record low-water levels were observed at 12 of the 20 monitoring wells included in this report. A go-day ground-water emergency was declared in parts of northwestern Indiana. Streamflow throughout the State was affected to varying degrees by the drought. Annual mean discharge in some rivers was only slightly less than the mean annual discharge, while others flowed at less than half that value. The effects of low streamflows were felt by many as electric power plants reduced or ceased production and public-water utilities requested conservation measures by their customers. Major reservoirs in the State approached or reached record low levels, causing water supplies as well as recreational activities to be diminished. Most major crops produced in Indiana were affected by the dry conditions. Average yields in 1988 ranged from 50 to 86 percent of 1987 yields.

Indiana↗

USGS2025

Sources of water and salts for the Zuni Salt Lake in west-central New Mexico

The Zuni Salt Lake is located in a maar in west-central New Mexico and contains hypersaline water that has long been used by Native Americans for religious purposes and the collection of salt. There have been several investigations suggesting different sources for the water and salt to the lake. Springs, seeps, and ephemeral streamflow have all been observed to contribute freshwater to the lake, and brackish to hypersaline seeps have been documented along the banks of the lake. This report summarizes the findings of a study that characterizes the lake’s hydrology, its water and salinity sources, and the hydrogeologic conceptual model. Regional groundwater levels indicate that each of the aquifers in the area have the potential to discharge groundwater to the lake. There is also evidence of vertical groundwater flow pathways at the maar that were likely created by the igneous intrusion that fractured the intersecting aquifers. A detailed water budget was constructed from continuous lake stage, precipitation, and evaporation data to estimate the groundwater inflow to the Zuni Salt Lake. It was determined that groundwater inflow to the lake is 441 ±94 acre-feet per year, which composes as much as 77 percent of the total inflows. The high sodium and chloride concentrations measured in two hypersaline samples collected near the lake indicate that the majority of the dissolved solids entering the lake are from a hypersaline groundwater source. The geochemical and isotopic compositions measured in the lake and surrounding features support the interpretation that hypersaline groundwater is the primary source of salts to the lake, which is likely sourced from the older (and deeper) Permian units. The hypersaline groundwater samples collected during this investigation have a unique aqueous chemistry relative to each of the mapped aquifers, and variability in groundwater compositions is interpreted to result from differences in minerology and residence time.

New Mexico↗

USGS2026

The Sand AbrasioN Device for Aeolian Research (SANDAR): A new experimental device for investigating how wind transport affects sand on Earth and Mars

On Earth and Mars, aeolian transport causes sand grains to become abraded, resulting in mineralogic and textural changes. Understanding how sands evolve, or mature, with transport via experimental studies is important for understanding the origins, geologic history, and cycling of sediments, as well as dust production. Previous experimental works have used a variety of methods to simulate aeolian transport in the laboratory, but practical limitations and similitude concerns have limited such research. Here, we present and validate the Sand AbrasioN Device for Aeolian Research (SANDAR), a modified air mill that uses pressurized air to circulate sand around a small abrasion chamber, simulating the effects of aeolian transport. This device is re-circulating to simulate long-distance transport, and it allows for repeated analyses of well-constrained sediment samples, revealing their evolution over time. It is compatible with the grain sizes (74–500 μm) and grain impact velocities (∼0.6–3.7 m/s) typically expected for natural aeolian environments, and is also adaptable for diverse applications simulating different wind conditions. We show that the SANDAR achieves similitude of kinetic energy with respect to saltating sand on both Earth and Mars. SEM and optical microscope imaging reveal that the SANDAR produces microtextures on the surfaces of sand grains similar to those found with natural aeolian transport, demonstrating that it effectively simulates the mechanical effects of aeolian processes. Thus, the SANDAR is a valid tool for use in experimental research to improve our understanding of sedimentary processes across the Solar System.

Aeolian Research↗

USGS2025

Sources and risk factors for nitrate, pathogens, and fecal contamination of private wells in rural southwestern Wisconsin, USA

Household well water can be degraded by contaminants from the land's surface, but private well owners lack means to protect the source water from neighboring disturbances. Rural residents of southwestern Wisconsin, USA, rely on private well water, and the combination of land use and fractured carbonate bedrock makes groundwater vulnerable to contamination. To identify the extent, sources, and risk factors of private well contamination, randomly selected wells sampled during two-day periods in fall (n = 301) and spring (n = 529) were analyzed for nitrate and indicator bacteria, and a subset (n = 138) was sampled across four seasonal events for analysis of pathogens and microbial source tracking markers by quantitative polymerase chain reaction. Risk factors representing land use, hydrology, geology, and well construction were analyzed for associations with contamination in multivariable models. The importance of risk factors varied by contaminant, illustrating the multifaceted nature of rural groundwater quality. Nitrate contamination was associated with agricultural land use, and wells with casings that extended below a shale aquitard accessed less contaminated water than those drawing water from above it. Human fecal microbes were detected in 64 wells (46%), and rainfall was the key risk factor for contamination, indicating that wastewater from septic systems was available to contaminate wells when transport conditions were favorable. Manure microbes from cattle/ruminants and pigs were detected in 33 and 13 wells, respectively, and concentrations increased with the hectarage of cultivated land near wells. Pathogen genes for viruses, bacteria, and protozoa were detected in 66 wells (48%), including more detections of zoonotic than human-specific pathogens, and human Bacteroides , an indicator of wastewater, was an equivocal predictor of pathogen presence in private wells. Characterizing important elements of the setting, like geology, and identifying sources and risk factors for contaminants can inform landscape-level policies to protect groundwater quality.

Wisconsin↗

USGS2025

Relationship of atmospheric nitrogen deposition to soil nitrogen cycling along an elevation gradient in the Colorado Front Range

Microbial processing of atmospheric nitrogen (N) deposition regulates the retention and mobilization of N in soils, with important implications for water quality. Understanding the links between N deposition, microbial communities, N transformations, and water quality is critical as N deposition shifts toward reduced N and remains persistently high in many regions. Here, we investigated these connections along an elevation transect in the Colorado Front Range. Although rates of N deposition and pools of extractable N increased down the elevation transect, soil microbial communities and N transformation rates did not follow clear elevational patterns. The subalpine microbial community was distinct, corresponding to a high C:N ratio and low pH, while the microbial communities at the lower elevation sites were all very similar. Net nitrification, mineralization, and nitrification potential rates were highest at the Plains (1,700 m) and Montane (2,527 m) sites, suggesting that these ecosystems mobilize N. In contrast, the net immobilization of N observed at the Foothills (1,978 m) and Subalpine (3,015 m) sites suggests that these ecosystems retain N deposition. The contrast in N transformation rates between the plains and foothills, both of which receive elevated N deposition, may be due to spatial heterogeneity not captured in this study and warrants further investigation. Stream N concentrations from the subalpine to the foothills were consistently low, indicating that these soils are currently able to process and retain N deposition, but this may be disrupted if drought, wildfire, or land-use change alter the ability of the soils to retain N.

Colorado↗

USGS2026

As above, so below? A framework for integrating long-term water quantity trends reveals divergent patterns in groundwater and low streamflow across the United States

Climate, land-use, and disturbance drive long-term global trends in groundwater levels and streamflow. At large scales, these trends are typically considered separately, despite the well-established concept that groundwater and surface water comprise a single resource. Joint trend assessment at national scales is challenging because it requires pairing and aggregating data from spatially disparate streamflow and groundwater monitoring sites for which no established framework exists. Here, we evaluate alternative approaches for integrating groundwater and streamflow data to enable joint trend analysis—a critical step toward understanding how water-budget components respond concurrently and interactively to environmental drivers. Mann–Kendall trends were computed for individual groundwater (annual mean depth) and streamflow (annual low of 7 d averages) sites across the U.S over 21- (2000–2020), 31- (1990–2020), and 41-year (1980–2020) periods. Regional Kendall trends were calculated using five spatially contiguous and noncontiguous regional classifications for aggregation based on subsurface (e.g. aquifer, geology) and surface (e.g. watershed, landscape) characteristics. Site-level results revealed contrasting trends, with tendencies toward increasing low flows (wetting) and increasing groundwater depths (drying). Agreement between streamflow and groundwater trends increased with regional aggregation and longer timeframes, though persistent skew toward streamflow wetting and groundwater drying remained. Results varied by region and trend period, with notable consistencies: unified drying in the West/Southwest and wetting in the Upper Midwest. Directional mismatches in long-term trends were prominent in the High Plains and Mississippi Alluvial Plain, whereas near-term mismatches were most evident in the Northwest. Aggregation by hydrologic landscape regions (HLR) yielded the greatest agreement between groundwater and streamflow trends. These findings indicate that coupled responses may represent combined influences of climate, relief, and geology, as captured by HLR, more strongly than geography or geology alone. Integrated water availability assessments may benefit from a multi-characteristic classification framework to treat groundwater and surface water as a unified resource.

Environmental Research: Water↗

USGS2024

Conceptualization and simulation of groundwater flow and groundwater availability in the Boone and Roubidoux aquifers in northeastern Oklahoma, 1980–2017

Oklahoma Groundwater Law (Oklahoma Statute § 82-1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations to determine the maximum annual yield for the State’s groundwater basins. The Boone and Roubidoux aquifers (also known as the Springfield Plateau aquifer and Ozark aquifer, respectively) are bedrock aquifers that extend from northeastern Oklahoma into Kansas, Arkansas, and Missouri. At present (2024), the Oklahoma Water Resources Board has yet to legally issue orders for the final determination of maximum annual yields for the Boone and Roubidoux aquifers. To support determination of a maximum annual yield, the U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, developed a hydrogeologic framework, a conceptual groundwater-flow model, and a calibrated numerical groundwater-flow model for the Boone and Roubidoux aquifers. Three types of groundwater-availability scenarios were simulated by using the calibrated numerical model. These scenarios were used to (1) estimate equal-proportionate-share groundwater withdrawal rates (groundwater withdrawal applied equally over the aquifer), (2) quantify the potential effects of projected groundwater withdrawals on groundwater storage over a 50-year period, and (3) simulate the potential effects of a hypothetical 10-year drought. For the Boone aquifer, equal-proportionate-share groundwater withdrawal rates were 1.10, 0.98, and 0.96 acre-feet per acre per year for the 20-, 40-, and 50-year scenarios, respectively. For the Roubidoux aquifer, equal-proportionate-share groundwater withdrawal rates were 1.76, 1.34, and 1.25 acre-feet per acre per year for the 20-, 40-, and 50-year simulations, respectively. For the 50-year scenarios, stream seepage was minimally affected. Over the 10-year drought scenario, groundwater storage in the Boone and Roubidoux aquifers decreased by 660,451 acre-feet (6.7 percent) and 508,472 acre-feet (1.0 percent), respectively.

Oklahoma↗

USGS2025

Flood-inundation maps for 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, 2023

Digital flood-inundation map libraries for two reaches that constitute 14.8 miles of Little and Big Papillion Creeks in Omaha, Nebraska, were created by the U.S. Geological Survey (USGS) in cooperation with the Papio-Missouri River Natural Resource District. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Program website at https://www.usgs.gov/mission-areas/water-resources/science/flood-inundation-mapping-fim-program , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at Little Papillion Creek at Irvington, Nebr. (USGS station 06610750), Little Papillion Creek at Ak-Sar-Ben at Omaha, Nebr. (USGS station 06610765), and Big Papillion Creek at Q Street at Omaha, Nebr. (USGS station 06610770) streamgages. Near-real-time stages at these streamgages may be obtained from the USGS National Water Information System database at https://doi.org/10.5066/F7P55KJN or from the National Weather Service Advanced Hydrologic Prediction Service at https://water.weather.gov/ahps/ . Flood profiles were computed for two different reaches that constitute 14.8 miles of stream length in the study area by using hydraulic models. The models were calibrated by adjusting roughness coefficients to best represent the current (2022) stage-streamflow relation at the streamgages within the study reach. The hydraulic models were then used to compute water-surface profiles at 1-foot stage intervals for selected stage ranges to represent various flooding scenarios at the streamgages in each reach. The simulated water-surface profiles then were combined with a digital elevation model using a geographic information system, which had a 10-foot grid spacing to delineate the flooding extents and water depths for each stage. The availability of these flood-inundation maps, along with information regarding current stage from the USGS streamgages, can provide emergency management personnel and residents with information that is critical for flood response activities and post flood recovery efforts.

Nebraska↗

USGS2026

Hydrogeologic framework and conceptual groundwater-flow model of the panhandle and northwest parts of the High Plains (Ogallala) aquifer in Oklahoma, 1998–2022

This study was conducted by the U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, to update the hydrogeologic framework and conceptual flow model for the panhandle and northwest parts of the High Plains (Ogallala) aquifer in Oklahoma, which together compose the Ogallala aquifer focus area. The study included the construction of a potentiometric surface, and available geologic and hydrologic data were used to evaluate saturated thickness of the aquifer. The water budget for the updated conceptual groundwater-flow model was based on estimated inflows and outflows for the 1998–2022 study period. Saturated thickness of the Ogallala aquifer averaged 127 and 116 feet for the panhandle and northwest parts, respectively. Groundwater withdrawals from the Ogallala aquifer for 1998–2022 averaged 422,054 and 39,645 acre-feet per year (acre-ft/yr) for the panhandle and northwest parts, respectively. Recharge, the primary inflow, was estimated at 0.63 inch per year for the 1998–2022 study period, with the panhandle part of the Ogallala aquifer receiving 175,068 acre-ft/yr and the northwest part of the Ogallala aquifer receiving 49,376 acre-ft/yr. Additional inflows included irrigation return flows, estimated at 8,111 and 642 acre-ft/yr for the panhandle and northwest parts, respectively, of the Ogallala aquifer. Net lateral groundwater flows, considered to be aquifer outflows, were estimated to account for 31,908 acre-ft/yr for the Ogallala aquifer focus area. Streambed seepage, which was an outflow of 5,535 acre-ft/yr, was only present in the northwest part of the Ogallala aquifer. Vertical leakage and saturated-zone evapotranspiration were considered negligible outflows. These findings provide a revised conceptual groundwater-flow model water budget for the Ogallala aquifer focus area in Oklahoma.

Colorado, Kansas, Oklahoma, Texas↗

USGS2024

Vulnerability assessment of groundwater influenced ecosystems in the Northeastern United States

Groundwater-influenced ecosystems (GIEs) are increasingly vulnerable due to groundwater extraction, land-use practices, and climate change. These ecosystems receive groundwater inflow as a portion of their baseflow or water budget, which can maintain water levels, water temperature, and chemistry necessary to sustain the biodiversity that they support. In some systems (e.g., springs, seeps, fens), this connection with groundwater is central to the system’s integrity and persistence. Groundwater management decisions for human use often do not consider the ecological effects of those actions on GIEs. This disparity can be attributed, in part, to a lack of information regarding the physical relationships these systems have with the surrounding landscape and climate, which may influence the environmental conditions and associated biodiversity. We estimate the vulnerability of areas predicted to be highly suitable for the presence of GIEs based on watershed (U.S. Geological Survey Hydrologic Unit Code 12 watersheds: 24–100 km 2 ) and pixel (30 m × 30 m pixels) resolution in the Atlantic Highlands and Mixed Wood Plains EPA Level II Ecoregions in the northeastern United States. We represent vulnerability with variables describing adaptive capacity (topographic wetness index, hydric soil, physiographic diversity), exposure (climatic niche), and sensitivity (aquatic barriers, proportion urbanized or agriculture). Vulnerability scores indicate that ~26% of GIEs were within 30 m of areas with moderate vulnerability. Within these GIEs, climate exposure is an important contributor to vulnerability of 40% of the areas, followed by land use (19%, agriculture or urbanized). There are few areas predicted to be suitable for GIEs that are also predicted to be highly vulnerable, and of those, climate exposure is the most important contributor to their vulnerability. Persistence of GIEs in the northeastern United States may be challenged as changes in the amount and timing of precipitation and increasing air temperatures attributed to climate change affect the groundwater that sustains these systems.

Connecticut, Delaware, District of Columbia, Maine↗

USGS2026

Groundwater quality near an oil field in a stream-dominated recharge setting, California, USA

Alluvial valley aquifers are important sources of water supply in many areas but effects of co-located oil and gas development on these resources have not been widely reported, especially in settings where recharge is dominated by stream infiltration. Interpreting the presence of geochemical indicators in the context of hydrology, geology, and other factors provides a more complete understanding of the relations between groundwater and sources of oil-field fluids and aids in identifying risks associated with oil and gas development. Groundwater and Salinas River water samples were collected in an alluvial valley near the San Ardo Oil Field in Monterey County, California and analyzed for a wide range of dissolved chemical, gas, and isotopic constituents to determine if oil-field fluids (water and gas from oil-producing and non-producing zones) have mixed with fresh groundwater used for supply. Hydraulic gradients, age-dating tracers, and other geochemical indicators show that recharge from the Salinas River has the potential to dilute oil-field fluids that might migrate or seep into the aquifer. Groundwater and Salinas River water collected downgradient of the San Ardo Oil Field showed little or no evidence of mixing with oil-field fluids. Some samples within the oil field contained trace amounts of hydrocarbons or elevated temperatures, indicating that any potential effects from oil-field activities are minor or have been diluted by recharge from the Salinas River. The two samples with the most geochemical evidence of potential mixing with oil-field fluids (SP-18 and GW-17) were collected west of or along the Los Lobos fault, where naturally occurring hydrocarbons are near the land surface. Those samples are also near active or inactive oil-field wells, and so anthropogenic activities and pathways cannot be ruled out as a cause of trace detections of hydrocarbons and elevated temperatures in the aquifer.

California↗

USGS2025

Structural controls on splay fault rupture dynamics during Cascadia megathrust earthquakes

Great subduction earthquakes ( M w ≥ 8.0) can generate devastating tsunamis by rapidly displacing the seafloor and overlying water column. These potentially tsunamigenic seafloor offsets result from coseismic fault slip and deformation beneath or within the accretionary wedge. The mechanics of these shallow rupture phenomena and their dependence on subduction zone properties remain unresolved, partly due to the sparsity of offshore observations of shallow megathrust earthquake deformation. Here, we analyze how offshore structure influences shallow rupture mechanics and slip partitioning using 3D dynamic earthquake simulations of the Cascadia subduction zone (CSZ) megathrust with and without variably dipping seaward- or landward-vergent splay faults in the wedge that sole into the megathrust. Resulting tradeoffs between splay and megathrust slip reveal structural controls on rupture partitioning, with greater splay slip leading to less shallow megathrust slip updip. Gently dipping and seaward-vergent splays host more slip than those with steeper, landward-vergent splays. To isolate the underlying mechanisms, we compare models with Andersonian and plunging principal stresses. Results suggest distinct static and dynamic processes control the dip- and vergence-dependence of splay rupture: static (mis)alignment relative to far-field tectonic loading favors slip on more optimally oriented, shallowly dipping splay faults. In contrast, dynamic stress interactions of an updip-propagating megathrust rupture front with the free surface and potential branch faults favor forward branching onto seaward-vergent splays and inhibit backward branching onto landward-vergent splays. Resulting seafloor displacements suggest splay fault structure may influence coseismic tsunami source processes, highlighting the importance of dynamically viable rupture scenarios in subduction hazard assessments.

Cascadia subduction zone↗

USGS2024

Intense alteration on early Mars revealed by high-aluminum rocks at Jezero Crater

The NASA Perseverance rover discovered light-toned float rocks scattered across the surface of Jezero crater that are particularly rich in alumina ( ~ 35 wt% Al 2 O 3 ) and depleted in other major elements (except silica). These unique float rocks have heterogeneous mineralogy ranging from kaolinite/halloysite-bearing in hydrated samples, to spinel-bearing in dehydrated samples also containing a dehydrated Al-rich phase. Here we describe SuperCam and Mastcam-Z observations of the float rocks, including the first in situ identification of kaolinite or halloysite on another planet, and dehydrated phases including spinel and apparent partially dehydroxylated kaolinite. The presence of spinel in these samples is likely detrital in origin, surviving kaolinitization, pointing to an ultramafic origin. However, the association of low hydration with increased Al 2 O 3 abundances suggests heating-induced dehydration which could have occurred during the lithification or impact excavation of these rocks. Given the orbital context of kaolinite-bearing megabreccia in the Jezero crater rim, we propose an origin for these rocks involving intense aqueous alteration of the parent material, followed by dehydration/lithification potentially through impact processes, and dispersion into Jezero crater through flood or impact-related processes.

Communications Earth & Environment↗

USGS2025

Nanometer-scale relationships between sedimentary organic matter molecular composition, fluorescence, cathodoluminescence, and reflectance: The importance of oxygen content at low thermal maturities

Molecular characterization of sedimentary organic matter (SOM), termed macerals, is a common goal when seeking to understand petroleum generation as well as other geologic processes in deep time. However, unambiguous measurement of discrete macerals is challenging due to the small size of organic particles in sedimentary rocks, the proximity of different organic matter types to one another, mineral-organic matter interactions, and maceral mixing that occurs during SOM isolation prior to ex situ analysis. The recent advent of infrared spectrometers capable of nanometer-scale resolution and the application of these technologies to geologic samples has enabled advances in rapid, in situ molecular characterization of SOM allowing for insights into paleoenvironmental processes, such as organic matter productivity and preservation, among others. Here we employ one such technology, optical photothermal infrared (OPTIR) spectroscopy, to map SOM functional group distributions at 500-nm resolution in a sample from the Lower Cretaceous Sunniland Limestone of the South Florida Basin. Examined fields of view include occurrences of amorphous organic matter (AOM), inertinite, micrinite, solid bitumen, telalginite, and vitrinite. OPTIR data from these macerals are compared against traditional organic petrographic data from the same organic grains including fluorescence intensity and white light reflectance as well as against cathodoluminescence response, an emerging organic petrographic approach. Maceral oxygen content (using carbonyl functional group abundance as a proxy) is observed to vary widely between maceral types but correlates strongly with fluorescence and cathodoluminescence intensity as well as against reflectance. These findings highlight the important role that oxygen content plays in determining the optical properties of SOM and further demonstrate the ability of OPTIR to discriminate subtle molecular differences between SOM types.

Organic Geochemistry↗