Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “The Mountain Geologist”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 15Linked to original sources
USGS2025

Origin of the high Pd/Pt ratio of the J-M Reef, Stillwater Complex Montana USA

The J-M Reef of the Stillwater Complex exhibits a high and consistent Pd/Pt ratio (~3.8). This ratio results from the equilibration of an immiscible sulfide liquid with a relatively high Pd/Pt silicate melt rather than an unusually Pd- and Pt-enriched parental melt. Numerical modeling suggests that the original silicate melt contained typical mantle-derived concentrations of Pd and Pt (~10–20 ppb Pd/Pt ~1). The partitioning of Pt and Pd between sulfide liquid and silicate melt alone cannot explain the consistently high Pd/Pt ratio across variable melt-to-sulfide mass ratios (R factors). Instead Pt-depletion caused by the early fractionation of Pt-alloy from S-undersaturated silicate magma likely established the high Pd/Pt signature. High Pd/Pt ratios can form through batch equilibration of sulfide liquid with silicate melt if partition coefficients are extremely high (>10⁶). Alternatively Pd enrichment may result from sulfide upgrading within the resident footwall mush under smaller partition coefficients (10⁴–10⁶) in this model the instantaneous R factors remain low (R ≈ 100–700). This limits the impact of Pt and Pd partitioning on sulfide composition and helps explain the Pd-enriched character of the J-M Reef.

Montana↗
USGS2025

Paleomagnetic correlation of surface and subsurface basalt flows in the central and southwestern part of the Idaho National Laboratory, Idaho

The U.S. Geological Survey, in cooperation with the U.S. Department of Energy, used paleomagnetic data from 22 coreholes to construct 3 fence diagrams of subsurface basalt flows in the southern part of the Idaho National Laboratory. These diagrams provide comprehensive descriptions of the horizontal and vertical distribution of basalt flows and sediment layers beneath the surface, aiding geological studies and contributing valuable data to numerical models of groundwater flow and contaminant transport. The correlations established though these diagrams include spatial correlations between basalt flows found in multiple coreholes. Correlations were identified by matching average paleomagnetic inclinations and confirming or denying these correlations using petrology, geochemistry and radiometric ages. The fence diagrams aid in identifying potential locations of subsurface vents, volcanic vents that have been buried by more recent volcanic activity, associated to subsurface basalt flows. By tracing the subsurface flows and analyzing where the greatest thickness occurs, the locations of buried vents can be inferred. Some subsurface flows exhibit correlations across several coreholes and may indicate yet unidentified surface or buried vents, thereby enhancing our understanding of the volcanic history and subsurface geology of the region.

Idaho↗
USGS2024

Three-dimensional hydrogeologic framework model of the Russian River watershed, California

The Russian River watershed is in northern Sonoma County and southern Mendocino County, California, in the northern part of the California Coast Ranges. The Russian River serves as a supply for agricultural irrigation and for municipal, domestic, and commercial uses. Through a cooperative agreement with the California State Water Resources Control Board and Sonoma County Water Agency, the U.S. Geological Survey has completed studies to better understand the hydrogeologic system and develop numerical hydrologic modeling tools to evaluate and aid in managing groundwater resources. This report focuses on the development of a digital three-dimensional hydrogeologic framework model of the Russian River watershed for use in groundwater resource assessment and numerical models. The digital three-dimensional hydrogeologic framework model of the Russian River watershed portrays the altitude, thickness, and extent of five hydrogeologic units. These five hydrogeologic units include (1) a basement unit, (2) the Sonoma Volcanics, (3) a consolidated sedimentary rock unit, (4) an unconsolidated sediment unit, and (5) channel alluvium. Model input data were compiled from published geologic maps, interpreted well data, and a model of the top of basement derived from gravity data. These data were used to construct surfaces that represent the upper and lower subsurface boundaries of each hydrogeologic unit. Top surfaces were created for the five hydrogeologic units and then stacked in three dimensions to create a solid-volume digital model. The digital three-dimensional hydrogeologic framework model described in this report and the corresponding data represent the generalized geometry of the subsurface geologic units; the model reproduces the input geologic data with reasonable accuracy and is consistent with previously published subsurface conceptualizations of the region. The model indicates the overall geometry of the basement within the watershed and the spatial extent, altitude, and thickness of the basin-filling units. The hydrogeologic framework model is at a scale and resolution appropriate for use as the foundation for a numerical hydrologic model of the study area.

California↗
USGS1976

Transport and dispersion of fluorescent tracer particles for the dune-bed condition, Atrisco Feeder Canal near Bernalillo, New Mexico

A tracer technique in which mineral particles were coated with fluorescent dyes was used to study the rates of transport and dispersion of sediment particles`of various diameters and specific gravities for a dune-bed condition in an alluvial channel. The experiment was conducted in the Atrisco Feeder Canal near Bernalillo, N. Mex., between May 1 and July 14, 1967. A continuous point source of tracers, approximated by injections at 5- or 10-minute intervals, was maintained for 7 days so that the steady-dilution procedure could be used to calculate the transport rate of bed material. After termination of the injection process, the spatial-integration procedure was used to follow the movement of the tracers downstream and to calculate the transport rate. Samples of the bed material in transport and the accompanying tracers moving along the surface of the dune bed were obtained periodically throughout the study with the "dustpan" sampler especially designed for fluorescent tracer studies. In addition, the spatial distributions of the tracers in the dune bed were determined three times during the study by core sampling.

New Mexico↗
USGS2024

Iodine-129 in the eastern Snake River Plain aquifer at and near the Idaho National Laboratory, Idaho, 2021–22

Between the 1950s and 1980s, wastewater generated at the Idaho National Laboratory contained Iodine-129 ( 129 I); this wastewater was discharged directly into the eastern Snake River Plain (ESRP) aquifer through a deep disposal well, unlined infiltration ponds, or leaked from distribution systems below industrial facilities. During 2021–22, the U.S. Geological Survey, in cooperation with the U.S. Department of Energy and the Idaho Department of Environmental Quality Idaho National Laboratory Oversight Program, collected groundwater samples from 64 monitoring wells in the ESRP aquifer, 6 of which are part of a multilevel monitoring system, to determine the concentration of 129 I in the groundwater. These samples were analyzed by accelerator mass spectrometry as part of a long-term ongoing study to track trends and occurrences of this carcinogenic, long-lived radionuclide in the environment. Concentrations ranged from slightly above the locally determined background concentration of 5.4×10 −6 picocuries per liter, to just below the U.S. Environmental Protection Agency’s maximum contaminant level of 1 picocurie per liter. Discharge of wastewater containing 129 I has been discontinued to the aquifer, and long-term trends from a subset (n=15) of sampled wells show decreasing 129 I concentrations over the last three decades. Concentrations of 129 I in groundwater from monitoring wells near facilities at the Idaho National Laboratory are affected by episodic recharge from an ephemeral surface-water source and by the fracture-flow dominated hydrologic regime in the ESRP aquifer. The spatially focused sampling effort has also identified a low-level 129 I plume that affects long-term water quality near and downgradient from the Advanced Test Reactor Complex in the southwestern part of the facility that had not been clearly defined in previous sampling efforts, although the definition of the plume is somewhat limited by available data.

Idaho↗
USGS2025

Prospectivity modeling of the NASA VIPER landing site at Mons Mouton near the Lunar South Pole

We use a high-resolution digital elevation model and a numerical thermal model to produce a variety of inputs for a water-ice prospectivity model for the Volatiles Investigating Polar Exploration Rover (VIPER) landing site. These input data are maps of topography, surface slope, surface aspect, surface curvature, maximum temperature, depth to ice stability, permanently shadowed regions (PSRs), distance to PSRs, and PSR density. This model predicts where water ice is most likely within the top meter of regolith, assuming plausible relationships between ice concentration and the various inputs. The model is designed to be adjusted in near-real time as data are collected during the VIPER mission. As such, it is a tool for both analyzing data from the mission as well as planning operations. Since the current model, at this point, relies only on orbital remote sensing, the final version will also be a tool to extrapolate the VIPER mission results across the lunar poles.

Planetary Science Journal↗
USGS2026

Seabed maps showing topography, ruggedness, backscatter intensity, sediment mobility, and the distribution of geologic substrates in quadrangle 3 of the Stellwagen Bank National Marine Sanctuary region offshore of Boston, Massachusetts

The U.S. Geological Survey, in cooperation with the National Marine Sanctuary Program of the National Oceanic and Atmospheric Administration, has conducted seabed mapping and related research in the Stellwagen Bank National Marine Sanctuary (SBNMS) region since 1993. The area being mapped using geophysical and geological data includes the SBNMS and the surrounding region, which totals approximately 3,700 square kilometers (km 2 ) and is subdivided into 18 quadrangles. The seabed is a glaciated terrain that is topographically and texturally diverse. Quadrangle 3, the subject of this scientific investigations map, has a mapped area of 185 km 2 and has water depths that range from about 30 meters (m) on the Stellwagen Bank crest to about 135 m in a basin east of South Ninety Bank, which lies off the eastern margin of Stellwagen Bank. Seven map types, each at a scale of 1:25,000, depict seabed topography, ruggedness, backscatter intensity, distribution of geologic substrates, sediment mobility, distribution of fine- and coarse-grained sand, and substrate mud content. These maps show the distribution of geologic substrates on the southeastern part of Stellwagen Bank, on adjacent banks and basins in deeper water to the east, in the eastern part of Race Point Channel to the south of the bank, and on the northern slope of Cape Cod. Interpretations of multibeam sonar bathymetric and seabed backscatter imagery, photographs, video imagery, and grain-size analyses were used to create the geology-based maps. Data from 309 stations were analyzed, including 279 sediment samples. The geologic substrate maps of quadrangle 3 show the distribution of 21 geologic substrates that represent a wide range of textures, such as rippled sand, immobile sand, immobile muddy sand, sand that partially veneers gravel, and boulder ridges. Mapped substrates are characterized by sediment grain-size composition, surface morphology, substrate layering, the mobility or immobility of substrate surfaces, and water depth range. This scientific investigations map portrays the major geological elements (substrates, topographic features, and processes) of environments in quadrangle 3. It is intended to provide a foundation for research into present and past sediment transport processes in a complex terrain, provide insights into the ecological requirements of invertebrate and vertebrate species that use the various substrates, and support seabed management in the region.

Quadrangle 3 of the Stellwagen Bank National Marin↗
USGS2025

The GorDAS Distributed Acoustic Sensing experiment above the Cascadia locked zone and subducted Gorda Slab

The southernmost portion of the Cascadia Subduction zone in Northern California produces high rates of moderate and large earthquakes owing to subduction of the Gorda slab and deformation associated with the Mendocino Triple Junction. Distributed Acoustic Sensing (DAS) is rapidly advancing as a method for detecting earthquakes and imaging crustal structure. We have begun a long-term DAS monitoring experiment on buried telecom fiber in Arcata, California, with the goal of increasing the available recordings of moderate to large earthquakes as well as imaging seismogenic structures. We have recorded over a year's worth of data, including most aftershocks of the 2022 M w 6.4 Ferndale earthquake, though not the mainshock itself. The dataset includes numerous magnitude 3.5 and larger earthquakes including the 2023/01/01 M w 5.4 Rio Dell earthquake. Here we present initial results comparing an earthquake detection algorithm, run in real-time on the processing unit of the interrogator system, with both the ShakeAlert earthquake early warning system as well as a post-processed earthquake catalog developed with deep-learning phase-picker algorithms. The rapid onboard processing of the detector demonstrates the potential utility of DAS-based edge computing for earthquake early warning. We also verify the quality of the strain waveforms both in terms of peak amplitudes and waveform similarity using about five months of nodal seismometer data. These instruments were deployed roughly every 300 m along the ~15km long cable and validate large variations in peak strain over short distances that are seen in the DAS data. All data from time windows surrounding both the local and teleseismic earthquakes are publicly available, which will improve our understanding of both the performance of DAS systems in moderate earthquakes and earthquake hazards associated with the Gorda subduction zone.

California↗
USGS2024

Conceptual hydrogeologic framework and groundwater budget near the southeastern part of Puget Sound, Washington

More than 1 million people live within the active model area (AMA) in the southeastern part of the lowlands surrounding Puget Sound, or Puget Lowland, Washington, and groundwater is the source for approximately one-half of their public, domestic, and irrigation water demands. The 887-square-mile AMA, located in King and Pierce Counties, represents the area of analysis for the conceptual hydrogeologic framework and numerical groundwater-flow models within the study area and includes the Puyallup River and Chambers-Clover Creek watersheds. To assess the potential hydrologic and anthropogenic impacts to groundwater and the connected surface-water resources, conceptual and numerical groundwater-flow models of groundwater flow were developed by the U.S. Geological Survey Washington Water Science Center in close cooperation with 18 water-resource agencies and stakeholders. This report presents information used to characterize the groundwater-flow system and the development of a numerical model in the AMA. Included are descriptions of the geology and conceptual hydrogeologic framework, groundwater levels and flow directions, groundwater recharge and discharge, numerical groundwater-flow model construction and results, and model limitations. The study area encompasses the western part of Pierce County and the southwestern part of King County, Washington. The study area extends south to the Nisqually River, southwest to Tanwax Creek, northeast to the Green River, and north through the valley near Auburn and adjacent uplands. It is bounded on the east by foothills of the Cascade Range, and on the northwest by Puget Sound.

Washington↗
USGS2024

On the provenance of field reports of the 1886 Charleston, South Carolina, earthquake: A seismo-historical whodunnit

Much of what is known about the effects of the 1886 Charleston, South Carolina, earthquake throughout the epicentral region can be attributed to meticulous field investigations by an individual with training in geology and engineering, Earle Sloan ( Clendenin, 1926 ). In a recent study, Bilham and Hough (2024) undertook a detailed analysis of the effects of the earthquake on railroads in the Charleston region, drawing heavily from Sloan’s reports. This exercise identified several inconsistencies in Sloan’s field reports, including understandable measurement imprecision, inferred data entry mistakes, and transcription errors. The study also begged the question, where was Sloan at the time of the mainshock and over the following week? And to what extent did he draw from secondhand information in compiling his reports? On this question Sloan’s reports were sometimes enigmatic, lending themselves to misinterpretation in contemporaneous as well as modern interpretations. Beyond the details that were germane for, and briefly summarized by, the studies of Bilham and Hough (2023 , 2024) , in this report we don our historical seismologist caps to chronicle Sloan’s activities following the earthquake. We summarize our inferences here for the benefit of future scholars who might attempt to retrace either Sloan’s footsteps or our own. This study also serves to highlight Sloan’s singular contributions to earthquake science, which were never published separately.

South Carolina↗
USGS2026

The mineral chemistry networks of tin and tungsten reflect metallogenic eras of the Mesozoic

Continental remobilization is a crucial driver of metallogenesis and the formation of ore deposits. Some of the world’s largest mineral deposits of the economically valuable elements tin (Sn), tungsten (W), gold (Au), copper (Cu), lead (Pb), and zinc (Zn) formed during the Mesozoic Era. Additionally, the chemistry and distribution of the elements Sn and W have been investigated in previous studies to understand planetary formation and differentiation processes. These two elements are largely co-located during certain South China Mesozoic metallogenic events but are not co-located during other time periods in the same regions. Here, we investigated the mineral chemistry network similarities and dissimilarities of Sn and W to understand their mineral formation and distribution during the Mesozoic Era and throughout Earth history. Mineral chemistry network community detection analysis and electronegativity associations among mineral constituent elements of Sn minerals and W minerals indicate that the elements have similar chemistry among their oxide minerals. However, Sn forms a much wider range of minerals that also contain S compared to W, which occurs in a limited number of S-containing minerals. The divergent constituent element interactions among S-containing Sn minerals and W minerals reflect the redox sensitivity and importance of oxygen (O) fugacity in Sn mineral formation. Conversely, extensive W mineral deposits are known to form at both high and low O fugacities. The similarities and differences between the mineral chemistry networks of Sn and W reflect the mineral distribution of the two elements in the Sn-W mineralization event from 160 to 139 Ma vs. the Sn–uranium (U) mineralization event from 125 to 98 million years ago (Ma). The mineral chemistry and distribution of Mesozoic Sn and W deposits illustrate the contrasting importance of redox and O fugacity on the mineral formation of different elements, and the dynamic crustal evolution that took place during this period of Earth history.

Geosciences↗
USGS2026

Stepovers and beyond: Structural control of The Geysers geothermal system and the broader Clear Lake region

Fault geometry exerts a first-order control on geothermal systems by governing stress localization, fracture development, and permeability, yet in complex fault networks or broader shear zones, the relative influence of individual geometric features is often difficult to resolve. In the northern California Coast Ranges, The Geysers geothermal field is commonly interpreted to occur within a releasing stepover, although no single, clearly defined stepover is identified in published studies. To investigate the structural controls on The Geysers and the broader Clear Lake region, a two-dimensional elastic boundary element model is developed to evaluate spatial patterns of dilational strain associated with progressively more complete fault geometries. Model results show that dilation in the region is not controlled by a single structure but instead reflects the combined effects of multiple interacting fault elements. Three primary controls are identified: (1) opposing bends in the regional strike-slip fault system, including a releasing bend along the Maacama fault; (2) the southern fault tip of the Collayomi fault, which generates a prominent dilational lobe beneath the southern Geysers; and (3) a releasing stepover between the Collayomi fault and the Geyser Peak–Mercuryville–Big Sulphur Creek fault system, inferred to collectively behave as a right-lateral shear zone bounding the western margin of The Geysers. Predicted dilational strain magnitudes are sufficient to localize permeability between faults. These results highlight that incorporating complete fault networks and bedrock geological mapping can enhance geothermal assessments and provide a transferable framework for evaluating structurally controlled permeability in tectonically active regions.

California↗
USGS2024

Current status of the community sensor model standard for the generation of planetary digital terrain models

The creation of accurate elevation models (topography) from stereo images are critical for a large variety of geospatial activities, including the production of digital orthomosaics, change detection, landing site analysis, geologic mapping, rover traverse planning, and spectral analysis. The United Stated Geological Survey, Astrogeology Science Center, continues to transition the supported planetary sensor models to the Community Sensor Model (CSM) standard. This paper describes the current state of use for this photogrammetric standard, supported sensor model types, and qualitatively compares derived topography between SOCET SET and SOCET GXP ( ® BAE Systems) using HiRISE stereo images of Mars. Our transition to the CSM standard will ensure an uninterrupted capability to make these valuable products for Mars and many other extraterrestrial planets and moons.

Remote Sensing↗
USGS2025

Quaternary-active faults and the role of inherited structures in the Sacramento-San Joaquin Delta, western Central Valley, northern California

Seismic sources and their associated hazards within the Sacramento-San Joaquin Delta region of north-central California are relatively poorly characterized as compared to other, more heavily studied regions of northern California, such as the San Francisco Bay Area. Here we present a synthesis of subsurface, bedrock geology, and geodetic datasets from the Delta and from the Coast Ranges and Diablo Range to the northwest and southwest, respectively. We integrate these data and our own surface geologic and geomorphic observations to present a comprehensive review of faults in the Delta that exhibit Quaternary activity. Structural geologic data from the surrounding region highlight the significant influence that Late Cretaceous-to-Paleogene forearc structures exert on the geometry and kinematics of major Quaternary-active structures within the Delta. These inherited structures — including the Pittsburg-Kirby Hills Fault, Midland Fault, and Great Valley Fault System — exhibit a range of geometries and kinematics. Analysis of geomorphology along these structures suggests that these structures combine to accommodate Quaternary strain across the Delta region. A clearer understanding of subsurface geometries and structural relationships, built upon the regional tectonic history, provides insight into modern deformation accommodated on older structures and helps inform interpretations of seismic hazard within the Delta.

California↗
USGS2026

Origin of the Pd/Pt ratio of the J-M Reef, Stillwater Complex, Montana, USA

The J-M reef of the Stillwater Complex is characterized by a high Pd/Pt ratio (mean ~3.8 with a standard error of 0.03) with a homogeneous geospatial distribution at the deposit scale. In this contribution, we demonstrate that the Pd/Pt ratio of the reef is the product of equilibration of an immiscible sulfide liquid with a silicate melt rich in Pd relative to Pt. Despite the high tenors of the J-M reef sulfides (avg 2,700 ppm Pt and 770 ppm Pt), numerical modeling shows that the parental melts did not have extraordinary Pd and Pt concentrations. Instead, the initial composition of a plausible parental silicate melt can have Pd and Pt contents well within the expected range of a normal, mantle-derived partial melt (i.e., ~10–20 ppb for both Pd and Pt with Pd/Pt of ~1). The relative differences in the partitioning behavior of Pt and Pd between sulfide liquid and silicate melt are unlikely to produce a consistent Pd/Pt ratio across a wide range of silicate melt to sulfide liquid mass ratios (i.e., R factors). Instead, the pre-emplacement fractionation of Pt alloy from S-undersaturated silicate magma accounts for the homogeneous and high Pd/Pt ratio of the J-M reef. We show that batch equilibration of sulfide liquid with silicate melt can produce the high Pd/Pt ratios of the reef if the partition coefficients between sulfide liquid and silicate melt for Pd and Pt are extremely high (>10 6 ). In an alternative model, Pd enrichment could be achieved by sulfide upgrading in resident footwall mush even if the partition coefficients between sulfide liquid and silicate melt are relatively small (between 10 4 and 10 6 ) because the instantaneous mass ratio of silicate melt to sulfide liquid is small (R ≈ 100–700), so the partitioning behavior of Pt and Pd has little impact on the composition of sulfide liquid.

Montana↗
USGS2026

Tephra from Kīlauea’s 2008–2018 lava lake eruption—Proximal deposits and dispersal characteristics

A network of ten buckets was established early in the 2008–2018 summit eruption at Kīlauea to collect proximal tephra ejected from the new, informally named the “Overlook crater”; the buckets were emptied on most days of the eruption thereafter. This report summarizes the results of more than 2,400 different sampling intervals (most 1–3 days long) during the eruption, focusing on the physical and dispersal characteristics of the tephra deposits. The network was within about 300 meters south of the vent to capture tephra dispersed by the dominant northeast trade wind. The juvenile tephra mainly reflected spattering at the southeast (SE) sink, a downwelling area in the southeastern part of the lava lake in the Overlook crater that remained in the same area throughout the eruption, with admixtures of solid rock and secondary minerals derived from the wall of the crater. The proportion of juvenile material to lithic material ranged widely early in the eruption but was generally greater than 90 percent for the last 6 years of the eruption as lake level rose and the crater walls decreased in height and became more stable. The accumulation rate of tephra at each bucket was strongly dependent on the location of the bucket and reflects the interplay between lava lake level and wind direction and speed. The mass per unit area (m/a) of collected tephra was a maximum of about 97 kilograms per square meter for the entire eruption, equivalent to a thickness of about 75 millimeters. Thirty-two explosive events with a volcanic explosivity index of −2 to −4 deposited much of the tephra in the network. Fifteen of these rock-fall-induced events occurred within 6 days of one another. Pele’s hair, a volcanic glass predominantly associated with quieter activity at the vent in the final half of the eruption, was dispersed more than 60 kilometers downwind from the lava lake and formed a nearly continuous deposit near the Overlook crater. This eruption was probably the most frequently sampled long-lasting eruption in history, but most of the deposits are ephemeral. The collected samples, although generally of small mass, are retained by the Hawaiian Volcano Observatory and are available for detailed study.

Hawaii↗
USGS2024

Onset of aftershocks: Constraints on the Rate-and-State model

Aftershock rates typically decay with time t after the mainshock according to the Omori–Utsu law, R (t)=K(c+t) −p ⁠ , with parameters K , c , and p . The rate‐and‐state (RS) model, which is currently the most popular physics‐based seismicity model, also predicts an Omori–Utsu decay with p = 1 and a c ‐value that depends on the size of the coseismic stress change. Because the mainshock‐induced stresses strongly vary in space, the c ‐value should vary accordingly. Short‐time aftershock incompleteness (STAI) in earthquake catalogs has prevented a detailed test of this prediction so far, but the newly developed a ‐positive method for reconstructing the true earthquake rate now allows its testing. Using previously published slip models, we calculate the coseismic stress changes for the six largest mainshocks in Southern California in recent decades and estimate the maximum shear as a scalar proxy of the coseismic stress tensor. Aftershock rates reconstructed for events in different stress ranges show that the rates follow a power law with p = 1 independent of stress with no clear sign of a c ‐value. The onset of the power‐law decay is abrupt and more delayed in areas with smaller stress changes. The observations do not necessarily contradict the RS model, as STAI limits the resolution for early aftershocks, and the RS model can reproduce the observations for specific Aσ values. However, the observations lead to strong constraints, namely Aσ <10 kPa and a power‐law decay of the background rate with distance to the fault, with exponent 2.7.

Seismological Research Letters↗
USGS2026

Statewide surficial geologic map of Nebraska underscores Quaternary landscape evolution from the High Plains to the Central Lowland

Surficial geologic mapping in Nebraska has been conducted primarily at the 1:24,000 scale since the mid-1990s, although there have also been limited efforts to map generalized Quaternary and surficial geology within the state and the region. We compiled and evaluated disparate maps (1:24,000–1:1,000,000) and datasets—including geologic, soil and soil parent material, and geomorphic maps as well as LiDAR derivatives—to produce a single 1:500,000 scale surficial geologic map of Nebraska that is the first of its kind. This new map provides a coarse-scale surficial geologic map that will be incorporated into a nationwide U.S. Geological Survey Quaternary geologic map. It also reflects the variation and uniqueness of physical landscapes in the state, where the Great Plains and Central Lowland physiographic provinces meet, further developing a richer interdisciplinary understanding of regional geomorphology in the heart of North America.

Nebraska↗