Geology ReportsSearch

SEARCH · Geology Reports

Results for “Scientific Investigations Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

862 records · Page 15Linked to original sources

Hydrogeologic atlas of aquifers in Indiana

Aquifers in 12 water-management basins of Indiana are identified in a series of 104 hydrogeologic sections and 12 maps that show the thickness and configuration of aquifers. The vertical distribution of water-bearing units and a generalized potentiometric profile are shown along 3,500 miles of section lines that were constructed from drillers' logs of more than 4,200 wells. The horizontal scale of the sections is 1:125,000. Maps of aquifers showing the areal distribution of each aquifer type were drawn at a scale of 1:500,000. Unconsolidated aquifers are the most widely used aquifers in Indiana and include surficial, buried, and discontinuous layers of sand and gravel. Most of the surficial sand and gravel is in large outwash plains in northern Indiana and along the major rivers. Buried sand and gravel aquifers are interbedded with till deposits in much of the northern two-thirds of Indiana. Discontinuous sand and gravel deposits are present as isolated lenses, primarily in glaciated areas. The bedrock aquifers generally have lower yields than most of the sand and gravel aquifers; however, bedrock aquifers are areally widespread and are an important source of water. Bedrock aquifer types consist of carbonates; sandstones; complexly interbedded sandstones, siltstones, shales, limestones, and coals; and an upper weathered zone in low permeability rock. Carbonate aquifers underlie about one-half of Indiana and are the most productive of the bedrock aquifers. The other principal bedrock aquifer type, sandstone, underlies large areas in the southwestern one-fifth of Indiana. No aquifer is known to be present in the southeastern corner of Indiana.

Water-Resources Investigations Report

The Great Lakes Geologic Mapping Coalition—Working collaboratively to understand the geology of the Great Lakes Region

Introduction The Great Lakes Geologic Mapping Coalition (GLGMC), commonly referred to as the “Coalition,” is a partnership between the U.S. Geological Survey (USGS), the U.S. States of Illinois, Indiana, Michigan, Minnesota, New York, Ohio, Pennsylvania, and Wisconsin and the Canadian province of Ontario. The member States receive funding for geologic mapping work from the USGS National Cooperative Geologic Mapping Program (NCGMP), whereas Ontario participates as a nonfunded partner. The mission of the GLGMC is to produce three-dimensional (3D) geologic maps that depict unconsolidated sediments and near-surface bedrock in the Great Lakes region of North America. Geologic maps are the basis of most earth science investigations and help support resource exploration (energy, minerals, groundwater), natural hazard mitigation, infrastructure development, and land-use planning, all of which can be used to advance economic development and strengthen national security in the Great Lakes region. During the last few million years, the Great Lakes region has experienced repeated glacial advances and retreats, leaving behind extensive sediments, abundant natural resources, and widespread effects on the underlying bedrock geology (Swezey and others, 2022). Linked by shared histories of past glaciations, industrial agriculture, and legacy automotive, coal, steel, and manufacturing industries, the GLGMC member States collaborate to improve the understanding of the 3D distribution of the sediments overlying the region’s bedrock (fig. 1). Developing a comprehensive subsurface 3D framework of this glaciated terrain can provide earth science data to policymakers at all levels. These insights facilitate informed decisions on the exploration, use, and protection of vital resources, such as critical minerals, industrial materials, and aquifers, thereby supporting economic prosperity and the well-being of the citizens of this region. Since its inception in 1998, the Coalition has completed more than 100 geologic mapping projects across the Great Lakes region. Each project aims to deliver geologic maps, 3D datasets, and other information that improves understanding of the geology of the Great Lakes region, with an emphasis on economic and water resources. Key deliverables include 3D geologic maps and models typically portraying sediment thickness, often derived from top-of-bedrock and borehole data. These products are developed through a combination of fieldwork, subsurface modeling, and the collection and analysis of rock and sediment cores. To support Coalition goals, member States collaborate with scientists working on related STATEMAP, EDMAP, and FEDMAP projects. Coalition scientists also engage with Tribal Nations in the Great Lakes region to ensure that Tribal interests pertaining to Coalition work are addressed. Through this collaboration, the Coalition unites the efforts of State, Federal, and Tribal Nation stakeholders to advance geologic data production and enhance understanding of the geologic resources of the Great Lakes region.

Illinois, Indiana, Michigan, Minnesota, New York,

Airborne geophysics for geologic mapping of critical mineral systems in the United States southern midcontinent

The increased demand for clean energy technology and a significant reliance on foreign supply chains have given impetus to understanding critical mineral systems and locating potential resources within the United States. At least thirteen critical mineral-bearing systems have been identified throughout the U.S. southern Midcontinent (Hofstra and Kreiner, 2020) but much of the region’s geologic framework is concealed by vegetation and sedimentary cover that hinder traditional geologic mapping efforts. Airborne geophysical data provide an effective way to overcome these obstacles and to provide additional insight into the deeper structures that underlie shallow mineralization. However, legacy airborne magnetic and radiometric data were collected using now-outdated instruments and methods, inconsistent survey parameters, and large flight-line spacings resulting in low-resolution data that present challenges to regional-scale study and interpretation. Over the last decade, the U.S. Geological Survey Earth Mapping Resources Initiative (EMRI) and National Cooperative Geologic Mapping Program have conducted a series of high-resolution airborne magnetic and radiometric surveys across the southern Midcontinent (Fig. 1) as part of an effort to improve understanding of the geophysical framework and natural resource potential in the region. These surveys are designed using modern survey methods and instruments with consistent parameters for flight-line spacing and flight height relative to magnetic sources. The EMRI airborne surveys are planned in collaboration with State geological surveys based on focus areas (Dicken et al., 2022) according to the presence of or potential for critical mineral deposits. High-resolution airborne magnetic and radiometric data cover focus areas such as the southeast Missouri iron metallogenic province and South-Central iron-oxide-apatite (IOA) – iron-oxide-copper-gold (IOCG) province, the Magnet Cove alkaline-carbonatite complex, the Midwest Permian ultramafic dike district, the Illinois-Kentucky fluorspar district, and several Mississippi Valley-type lead-zinc deposits and districts (Fig. 1). These focus areas represent known deposits or prospective host systems of critical minerals including rare earth elements (REEs), platinum-group elements (PGEs), cobalt, lithium, fluorspar, niobium, titanium, vanadium, lead, zinc, gallium, germanium, and many more. Other significant geologic and geophysical features covered include the Reelfoot rift, the New Madrid seismic zone, the Illinois basin, the Arkoma basin, the South-Central magnetic lineament, and the Kentucky-Tennessee magnetic anomaly (Fig. 1). This presentation focuses on new airborne magnetic and radiometric data with continuous coverage across parts of six states, preliminary interpretations, examples of geologic mapping applications, and discussion of newly discovered magnetic anomalies and follow-up investigations.

Conference Paper

Influence of new residential construction varying in housing density on bird species, human tolerance guilds, and communities

Human population growth and changing settlement patterns fuel the development of urban fringe lands worldwide, with implications for biodiversity. We conducted a 12-year study of birds in the fast-developing urban fringe lands of the central Puget Sound region, Washington, USA, to examine the effect of development configuration on birds. We hypothesized that lower-intensity conservation developments, compared to higher-intensity planned community developments, would benefit the overall bird community, as well as native forest birds (avoiders of human development) and avian generalist species (adapters to human development), but that higher-intensity planned community developments would benefit synanthropic species (exploiters of human development). We fit single-species and multi-species occupancy models to test these hypotheses. Consistent with our hypotheses, we found that a greater proportion of the overall community, avoiders, and adapters occupied lower-intensity conservation developments compared to higher-intensity planned community developments. However, we did not detect an effect of development type on the exploiter guild, and we found that species in the exploiter guild are variable in their response to the configuration of suburban developments. We also hypothesized that human tolerance guilds would be a useful predictor of individual species responses to development type. This hypothesis was somewhat supported: we found that, for avoiders, 87% of species in the guild had the same response to development type as the overall guild; for adapters, 63% had the same response as the overall guild, and for exploiters, only 44% had the same response as the overall guild. Our results indicate that the configuration of suburban developments can have a meaningful impact on bird communities, particularly on those species that are most sensitive to any level of development.

Washington

Reservoir evolution, downstream sediment transport, downstream channel change, and synthesis of geomorphic responses of Fall Creek and Middle Fork Willamette River to water years 2012–18 streambed drawdowns at Fall Creek Lake, Oregon

Executive Summary Chapter A. Introduction Fall Creek Dam impounds Fall Creek Lake, a 10-kilometer-long reservoir in western Oregon and is operated by the U.S. Army Corps of Engineers (USACE) primarily for flood-risk management (or flood control) in late autumn through early spring months, as well as for water quality, irrigation, recreation, and habitat in late spring through early autumn. Since 2011 (water year [WY] 2012), Fall Creek Lake has been temporarily drawn down each year to facilitate downstream passage of juvenile spring Chinook salmon ( Oncorhynchus tshawytscha ) through the 55-meter (m) high dam. This annual dam operation is temporary, typically lasting about 1–2 weeks from WY 2012 through 2020 (drawdown operations in WY 2022–24 have increased to more than 6 weeks). Drawdown of the reservoir results in lake levels being lowered to the elevation near the historical, pre-dam streambed. The annual streambed drawdowns of WY 2012–18 have improved fish passage and led the USACE to formally adopt streambed drawdowns as part of annual operations at Fall Creek Dam. However, temporarily lowering the lake to streambed creates free-flowing conditions in the reservoir that result in the erosion and episodic export of predominantly sand and finer-grained sediments (less than 2 millimeters [mm]) to the lower gravel-bed reaches of Fall Creek and the Middle Fork Willamette River. The introduction of large volumes of sand and finer-grain sediment into the dam-regulated reaches downstream from Fall Creek Dam prompted questions about the geomorphic responses to annual streambed drawdowns within Fall Creek Lake and downstream reaches along Fall Creek and the Middle Fork Willamette River. The U.S. Geological Survey (USGS) in partnership with USACE initiated a comprehensive geomorphic and sediment transport investigation to assess the coupled processes of reservoir erosion, sediment evacuation from Fall Creek Lake, and patterns of sediment transport and deposition in reaches downstream from the Fall Creek Dam that have resulted from annual streambed drawdowns. The purpose of this report is to systematically describe the processes of sediment erosion, transport, and deposition at Fall Creek Lake and geomorphic interactions between reaches upstream and downstream from Fall Creek Dam that relate to dam operations. Specifically, this report focuses on evaluating geomorphic responses to streambed drawdowns from WY 2012 through 2018 and placing drawdown-induced geomorphic responses within the broader context of physiographic and historical conditions and dam operations of Fall Creek and Middle Fork Willamette Rivers. Key objectives for this study were to characterize changes in reservoir morphology and substrate at Fall Creek Lake, describe the character and temporal pattern of sediment transport downstream from Fall Creek Dam, characterize geomorphic changes in channel reaches downstream from the Fall Creek Dam, and relate these data to the annual streambed drawdowns of WY 2012–18. This study uses multiple independent monitoring and measurement approaches to assess site, reach, and river-scale geomorphic responses to drawdowns to inform dam and reservoir management. Patterns and processes of reservoir evolution were assessed with geomorphic mapping and volumetric analyses of topography through comparison of multiple digital surface models (DSMs). Just downstream from Fall Creek Dam, analyses of sediment export from the reservoir focused on suspended sediment but also incorporated bedload analyses to assess sediment sizes. Geomorphic assessments downstream from the dam used reach-scale and site-scale approaches to document changes in channel morphology and substrate, including site measurements of sand and finer-grained sediment deposition and in-channel bed-material, volumetric change analyses from comparison of digital elevation models (DEMs), and repeat geomorphic mapping. Findings from this study inform river management and dam operations by providing an understanding of (1) coupled upstream-downstream geomorphic responses to the Fall Creek Lake streambed drawdowns, (2) geomorphic responses of Fall Creek Lake streambed drawdowns in comparison to drawdowns at other large dams, (3) controls on reservoir erosion and downstream geomorphic responses, and (4) implications for future hydrogeomorphic changes that may result from continued drawdowns and monitoring activities to assess those changes. Chapter B. Reservoir Morphology and Evolution Related to Dam Operations at Fall Creek Lake To understand the volume and distribution of sediment accumulation in Fall Creek Lake since dam closure in 1965, decadal-scale sedimentation patterns (spanning approximately 1965–2016) are evaluated using a combination of storage curve analyses and geomorphic mapping. Short-term (drawdown event-scale) patterns of erosion, sedimentation, and sediment export downstream are evaluated using a combination of geomorphic mapping and change detection analyses that quantify the distribution and total volume of sediment erosion and deposition within Fall Creek Lake. Geomorphic mapping of reservoir topography and analyses of historical datasets reveals four categories of landforms and sediment processes within Fall Creek Lake related to lake level operations: lacustrine sedimentation expressed in the reservoir floor, fluvial erosion and deposition within historical stream channels during streambed drawdowns, channel-like features created by erosion within the reservoir floor during streambed drawdowns, and erosion on reservoir hillslopes. Where the reservoir floor is mapped for this study as pelagic (deep water), deposition up to 3 meters (m) thick by lacustrine processes and burial of pre-dam topography with deposits thinning toward the edges of the valley floor and upstream areas of reservoir are observed. Despite over 50 years of sediment accumulation since dam construction, the main stream channels of Fall and Winberry Creeks (or reservoir thalwegs) through the reservoir are well defined, though their distinct morphology is likely influenced by a long history of recurring historical drawdowns to or near streambed since dam construction. Unregulated streamflow and sediment transport through the reservoir primarily are confined to these channels during the streambed drawdown periods. Erosional channel-like features created by drawdowns are carved through underlying, unconsolidated reservoir floor sediments and are most prominent in the lower reservoir below minimum conservation pool (the low pool elevation during winter flood season); sediment generated from the formation of these drawdown channels is more likely to be transported through and out of the reservoir than sediment deposits along the reservoir hillslopes at the valley margins that are separated from main channels by areas of low-gradient reservoir floor. Morphologic changes in the lower reservoir topography between January 2012 and November 2016 indicate overall net erosion of about 129,500 cubic meters (m 3 ). The most prominent geomorphic changes occurred along the main channels of Fall and Winberry Creeks near the Fall Creek Dam where incision, lateral migration, and slumping banks resulted in vertical and lateral adjustments to channel position, whereas most changes fell below the detectable limit on higher-elevation reservoir floor surfaces except where erosion occurred along features mapped as drawdown channels. Chapter C. Sediment Delivery from Fall Creek Lake and Transport through Downstream Reaches USGS implemented a sediment monitoring program in WY 2013–18 to evaluate the quantity and character of reservoir sediment exported from Fall Creek Lake during streambed drawdowns. Turbidity and suspended sediments were monitored annually autumn through spring to span the WY 2013–18 streambed drawdowns; however, unequal monitoring timeframes each year reduced the ability to compare results and factors affecting sediment export from the reservoir difficult between years. These data were originally measured to develop regressions and compute suspended-sediment loads (SSL). Bedload sediment monitoring from a cableway at the Fall Creek streamgage was completed in the autumn-winter of WY 2013 and 2017. The limited number of samples and presumed variability in sediment supply from the reservoir precluded construction of streamflow and bedload discharge relations to compute more than instantaneous bedload. Sand and finer-grained silts and clays were transported from the reservoir in suspension, though some coarser grains (up to 32 mm) were also mobilized and transported downstream from the dam as bedload. Observations of increased sediment transport downstream from Fall Creek Dam coincided with lake levels approaching about 3 m (10 feet [ft] or elevation 690 ft) above the streambed regulating outlets. Suspended-sediment loads computed for the full monitoring periods WY 2013–18 at the Fall Creek streamgage, located 1.4 kilometers (km) downstream from Fall Creek Dam, range from 54,700 metric tons (t) in WY 2013 to 13,900 t in WY 2018. Although the total annual SSL varied from year to year, the overall seasonal patterns of suspended sediment transport throughout each year were similar during monitoring in WY 2013-18. Suspended-sediment loads were low prior to the drawdown, then increased rapidly as lake levels lowered and approached the streambed. In the weeks following the drawdown period, as pool levels were increased, SSL remained slightly elevated above pre-drawdown levels but generally declined through the following winter and spring except during streamflow-driven pulses of suspended-sediment transport. WY 2013 had the greatest total computed SSL for each streambed drawdown and partial-year monitoring period. SSL computed for the partial-year period have generally decreased since WY 2013 and have varied by about 6,800 t with the exception of WY 2014. WY 2014 SSL reflects anomalously low sediment export due to low streamflows and freezing conditions that stabilized reservoir floor deposits. Bedload measurements in the short 1.4-km reach between Fall Creek Dam and the Fall Creek streamgage showed an inverse correlation between bedload transport rates and discharge, which probably reflects diminishing supply of coarse-sized sediment. Sand was more abundant (60–100 percent) than gravel in bedload samples confirming sand and finer-grained sediment dominated sediment evacuated from the reservoir during streambed drawdowns at Fall Creek Lake. Chapter D. Geomorphic Responses to Fall Creek Lake Streambed Drawdowns Downstream from Fall Creek Dam In the days, weeks, and months following streambed drawdown operations at Fall Creek Dam through WY 2018, sites downstream from the dam displayed a variety of geomorphic responses to reservoir sediment delivery within the main channel and overbank areas. Evaluation of streambed elevations at two streamgages located 1.4 km downstream from the dam on Fall Creek and 16.3 km downstream from the dam on the Middle Fork Willamette River indicated the effects of drawdown sediment on bed elevations were modest and transient. Repeat particle size measurements (October 2015 and September 2016) at five sites along Fall Creek and the Middle Fork Willamette River showed similar grain-sized distributions that do not reveal substantial deposition of fine-grained sediment related to the WY 2016 streambed drawdown. Altogether, these findings indicate that transport capacity in the main, low-flow channels of Fall Creek and Middle Fork Willamette River during WY 2012–18 was sufficient to mobilize and evacuate reservoir sediments from streambed drawdowns or other bank material and tributary sources. However, other monitoring for this study indicate low-velocity zones in off-channel areas are prime locations for sand and finer-grain sediment deposition. Patterns of overbank sediment accumulation indicate that the magnitude and timing of overbank deposition on bars and low-elevation floodplain varies with proximity to the dam, geomorphic setting, streamflows, and other factors. Sand and finer-grained reservoir sediments carried as suspended-sediment load in the reaches downstream from Fall Creek Dam were deposited in overbank areas as observed with clay-horizon markers during WY 2016–17. Overbank deposition quantified with Geomorphic Change Detection (GCD) software evaluated landform-scale patterns of erosion and deposition using repeat light detection and ranging (lidar) surveys at two sites in the Upper Fall Creek reach and one site in the Jasper reach for 3 years (2012–15) and one site in the Clearwater reach for 6 years (2009–15). Deposition thickness and spatial patterns from the GCD analysis were variable; some sites had dispersed but measurable deposition while at others, deposition was highly localized and exceeded 1 m in depth. Patterns of overbank deposition illustrate interactions among bar morphology, local hydraulics, and suspended-sediment transport dynamics that can create patches of highly localized deposition. The measured deposition at the two Fall Creek GCD sites likely resulted from reservoir sediments released from Fall Creek Lake during streambed drawdowns in WY 2016 and 2017 because the limited sediment inputs from bank material (geomorphically laterally stable reach) or tributaries (no significant tributaries) provided few other sediment sources. On the Middle Fork Willamette River, observed patterns of overbank deposition could reflect sediment sourced from upstream tributaries, bank erosion, or Fall Creek Lake streambed drawdown operations. Despite the introduction of several thousand tons of reservoir sediment delivered from the Fall Creek Lake streambed drawdowns to below-dam river corridors, reach-scale mapping of channel features downstream from Fall Creek Dam shows minimal evidence of changes in channel planform or landforms that can be attributed to a drawdowns in WY 2012–16. On Upper Fall Creek reach, widespread increases in gravel bars or other in-channel sediment did not result from the five streambed drawdowns. The main changes attributable to sediment releases from Fall Creek Lake were localized increases in vegetated bar area, particularly on channel margin areas where sand and finer-grain sediment was deposited and rapidly colonized by vegetation. The area of mapped secondary water features decreased between 2005 and 2016, but that may be due to lower discharges depicted in the 2016 aerial photographs and less mapped area of inundation. Primary changes along the Lower Fall Creek reach include a 6.4 percent decrease in area of secondary water features between 2011 and 2016, and a nearly twofold increase in the area of unvegetated bars. Immediately downstream from the Fall Creek confluence, there were negligible changes in the location and areas of vegetated bars and the main wetted channel between 2005 and 2016, and local increases in bar area cannot be attributed solely to deposition of reservoir sediments from Fall Creek Lake because (1) areas along the Middle Fork Willamette River just upstream from the Fall Creek confluence display similar type and magnitude of changes and (2) some of the increases at the confluence area pre-date the drawdowns. The cumulative effect of sediment releases from Fall Creek Lake streambed drawdowns from WY 2012 to 2016 on downstream channel planform and landforms are modest compared to the river-scale transformations and planform changes that occurred in the decades following dam construction. Chapter E. Discussion of Geomorphic Responses of Fall Creek and Middle Fork Willamette River to Streambed Drawdowns at Fall Creek Lake Multiple aspects of Fall Creek Dam infrastructure and operations exert first-order controls on the magnitudes of reservoir erosion that occur during the streambed drawdowns and ultimately determine the sediment delivery to downstream reaches. Key aspects of the dam and its operations that are most relevant to assessing geomorphic responses to streambed drawdowns include the (1) dam infrastructure, including configuration and size of regulating outlets and their proximity to the streambed which dictates the capacity and competence of the river to deliver sediment to downstream reaches and mode of sediment transport as suspended-sediment load or bedload; (2) frequency of historical drawdowns and long-term, year-round dam operations and lake level management, which partly dictate reservoir morphology and locations and magnitudes of readily erodible materials; (3) dam operations and hydroclimatic conditions during the streambed drawdown (including length of the drawdown and streamflows entering the reservoir), which directly control the timing, duration and magnitude of reservoir erosion and sediment evacuation; and (4) dam operations following the streambed drawdown operation that regulate streamflows (and thereby sediment transport conditions) downstream of Fall Creek Dam which primarily reflect interactions between hydroclimatic conditions and flood control operations. Patterns of sediment erosion and evacuation observed in this study at Fall Creek Lake from WY 2012–18 suggest that reservoir erosion during annual streambed drawdowns may remain similar or decrease in future years assuming (1) annual streambed drawdown operations are implemented in similar manner as the WY 2012–18 drawdowns (in terms of duration, late autumn or early winter implementation, rate of pool-level lowering to reach streambed, and other factors), (2) streambed drawdowns coincide with similar conditions as were observed WY 2012–18 (similar sediment yield into reservoir, low reservoir inflows, limited precipitation, moderate air temperature), and (3) no major geomorphic changes in the main reservoir channels of Fall and Winberry Creeks occur (for example, channel avulsion). Under such conditions, it is hypothesized that the stream channel within the reservoir would achieve a quasi-equilibrium state with respect to annual influx and export of sediment and aided by the substantial amount of in-channel bedrock, will remain laterally stable without erosion across reservoir deposits. Patterns of sediment transport measured at the Fall Creek streamgage downstream from Fall Creek Dam provide insight into the potential effects of future streambed drawdowns at Fall Creek Lake. Analyses of suspended sediment measured in WY 2013–18 show a major reduction in suspended-sediment loads between WY 2013 and later years, indicating streamflows transporting sediment through the reservoir to downstream reaches during streambed drawdowns have become supply limited. The 6-year suspended-sediment monitoring and sampling program is insufficient to make predictions about future sediment transport conditions because of uneven monitoring periods and varying controls on reservoir sediment erosion. It is likely that future suspended-sediment loads will be variable but similar to those observed in WY 2015–18 if operational, climatic, and geomorphological factors remain similar to those monitored WY 2015–18. Suspended-sediment loads downstream from Fall Creek Lake will likely remain highest when regulating outlets are fully open and Fall Creek is free flowing with the reservoir fully drained with little to no residual pool. Over time, it is possible that the suspended-sediment loads would reflect mobilization of reservoir sediment deposited in the previous year rather than erosion of sediment deposited years or decades earlier. Bedload is likely to remain a small fraction of the total sediment load evacuated from the reservoir and is relatively modest compared with pre-dam bedload transport rates because most coarse sediment remains trapped by the dam. If sediment releases from Fall Creek Lake and ensuing streamflow conditions follow a similar pattern in the future as was assessed in this study spanning WY 2012–18, near-term geomorphic adjustments downstream of the dam are expected to be modest. Barring major operational, climatic, and geomorphological changes, local site-scale deposition on bars, overbank areas, or off-channel features that persists several months after the streambed drawdown will likely continue to be highly variable, ranging from negligible to several centimeters of deposition. At the landform-scale, low velocity areas nearest to Fall Creek Dam will likely continue to undergo rapid deposition immediately during and after a streambed drawdown event, similar to patterns observed for WY 2012–18. Some of the sediment entering these off-channel features and margin areas may be temporarily stored, then later remobilized and dispersed farther downstream. But if newly deposited sediment persists through the following spring, there is a greater likelihood that local vegetation will establish, reinforce deposited material, and trap sediment during later drawdowns. The reach-scale geomorphic changes may become more apparent if (1) streambed drawdowns continued for several decades, and geomorphic changes were measured at decadal scales or (2) the amount of sediment introduced to downstream reaches substantially increased and (or) sediment transport capacity decreased. The continued streamflow regulation of Fall Creek Dam after sediment releases provides an opportunity to strategically manage streamflows during and after the streambed drawdowns to minimize downstream sediment impacts and ensure other operational thresholds are satisfied. This study provides a comprehensive foundation of datasets and geomorphic analyses to inform dam operations at Fall Creek Lake, monitor sediment transport downstream, and consider operational schemes for future drawdowns. The datasets from this study also provide baselines of sediment transport and geomorphic conditions to assess future changes in reservoir and downstream environments. Future monitoring could be tailored to address specific questions regarding the long-term geomorphic effects of streambed drawdowns on fluvial habitats, flood hazards, cultural resources, or downstream water quality. Future monitoring activities could focus on the relevant geomorphic processes and spatial domains within the three categories used for this study: (1) reservoir erosion and net sediment evacuation, (2) sediment delivery to downstream reaches, including magnitude and temporal pattern of sediment transport, and (3) geomorphic responses of downstream reaches to sediment delivery. Specifically, high priority future monitoring activities could include: Repeat topographic or photographic surveys in the reservoir to characterize changes occurring within individual drawdowns, to quantify sediment export, to determine temporal changes in reservoir storage, and to identify locations of erosion and deposition. Continuous, year-round turbidity monitoring supplemented with suspended-sediment measurements at a streamflow-gaging station immediately downstream from the dam to quantify sediment export. Repeat geomorphic monitoring, mapping, or modeling in downstream reaches to track changes in channel and over bank features using a combination of site- and reach-scale monitoring approaches. This could support assessments of sediment deposition and ensuing vegetation encroachment on flood hazards and habitats and examine how sediment transport and depositional processes may be affected by different sediment supply, streamflow, or dam management scenarios.

Oregon

Modeling seawater intrusion along the Alabama coastline using physical and machine learning models to evaluate the effects of multiscale natural and anthropogenic stresses

Seawater intrusion threatens groundwater resources in coastal regions, including southern Baldwin County, Alabama, where the freshwater-saltwater interface dynamics remain poorly understood. To address this gap, this study uses combined physics-based and machine-learning models to quantify seawater intrusion caused by natural (storm surges) and anthropogenic (human activities) perturbations. The long short-term memory network and wavelet analysis were used to assess vertical aquifer vulnerabilities, revealing that the shallow part of the Coastal lowlands aquifer system (CL1) in the southern Baldwin County region is more susceptible to sea level rise and groundwater extraction than deeper aquifers. Based on these findings, a cross-sectional numerical model (physics approach) for the CL1 aquifer was developed to evaluate tidal and storm surge effects, using Tropical Storm Claudette (June 2021) as a case study. Results showed that tidal fluctuations had a minimal impact on the saltwater-freshwater interface location, whereas storm surges caused substantial inland movement, with effects lasting for nine months. The steady-state version of the three-dimensional (3D) physical model predicted seawater intrusion across the entire area, and convolutional neural network-based modeling further validated the model results. The 3D physical model was also applied to a smaller area to assess human impact on the saltwater interface due to two groundwater pumping scenarios (± 50% of the baseline pumping rate). Results revealed that a 50% increase in groundwater withdrawals caused seawater to advance ~ 320 m inland, whereas a 50% reduction led to a ~ 270-meter retreat. This study highlights the vulnerability of Alabama’s shallow coastal aquifers to seawater intrusion due to storm surges and human activities, and demonstrates that combining physics-based models with machine learning approaches can improve groundwater predictions, though its accuracy depends on the availability of site-specific data.

Alabama

Mafic alkaline magmatism and rare earth element mineralization in the Mojave Desert, California: The Bobcat Hills connection to Mountain Pass

Occurrences of alkaline and carbonatite rocks with high concentrations of rare earth elements (REE) are a defining feature of Precambrian geology in the Mojave Desert of southeastern California. The most economically important occurrence is the carbonatite stock at Mountain Pass, which constitutes the largest REE deposit in the United States. A central scientific goal is to understand the genesis of the carbonatite ore body in the context of widespread REE-rich igneous activity. A swarm of mafic alkaline (shonkinite) dikes has been mapped and sampled at Bobcat Hills, 65 km southeast of the Mountain Pass mine. Whole-rock geochemistry and zircon geochronology demonstrate a clear affinity to the ca. 1.4 Ga Mountain Pass intrusive system. Bobcat Hills dikes have comparably high REE concentrations (La ∼1,000× chondritic) and an error-weighted mean 207 Pb/ 206 Pb zircon crystallization age of 1,426 ± 2 Ma (2 σ ). Unlike the alkaline intrusions at Mountain Pass, which have abundant inherited zircon from Paleoproterozoic basement rocks and crustally influenced oxygen isotope compositions (δ 18 O zircon = 6.5–7.5‰), the Bobcat Hills dikes lack any evidence of crustal assimilation and have oxygen isotope values that overlap a mantle range (Bobcat Hills average δ 18 O zircon = 5.6 ± 0.3‰). The dikes were a high-temperature, early center of mafic alkaline magmatism in the Mojave Desert that serve as a snapshot of melt generation from a spatially extensive, metasomatized mantle source. We propose that modification of the crust over many tens of Myr at Mountain Pass created an environment that favored crustal assimilation and enabled ascent of late-stage, REE-rich carbonatite magmas.

California

Four-band image mosaic of the Colorado River Corridor downstream of Glen Canyon Dam in Arizona, derived from the May 2021 airborne image acquisition

In May 2021, the U.S. Geological Survey’s Grand Canyon Monitoring and Research Center acquired airborne multispectral high-resolution data for the Colorado River in the Grand Canyon, Arizona. The image data, which consist of four spectral bands (red, band 1; green, band 2; blue, band 3; and near infrared, band 4) with a ground resolution of 20 centimeters, are available as 16-bit unsigned-integer GeoTIFF files in Sankey and others (2024) (available online at https://doi.org/10.5066/P9BBGN6G ). The image files are projected in the State Plane Coordinate System, using the central Arizona zone (202) with the North American Datum of 1983 National Adjustment of 2011. The assessed spatial accuracy for these data is based on 47 ground-control points that were independent from the ground-control points used by the contractor for aerotriangulation and is reported at the 95-percent confidence level as 0.514 meter (m) and a root mean square error of 0.297 m. The intended uses of this dataset are primarily in support of scientific research and monitoring applications. Examples of these applications include high-resolution spatial and temporal change detection of the river channel, geomorphic landforms, riparian vegetation, and backwater and nearshore habitat, as well as other ecosystem-wide mapping. These imagery data also serve as reference material for field science mission planning, as base data for field data collection including community science activities, and as a highly detailed guide for technical boat operation during science activities such as reconnaissance for nighttime missions and navigating rapids during low flows.

Arizona, Nevada, Utah

New developments at the Center for Engineering Strong-Motion Data (CESMD)

The Center for Engineering Strong-Motion Data (CESMD), an internationally utilized joint center of the U.S. Geological Survey (USGS) and the California Geological Survey (CGS), provides a single access point for earthquake strong-motion records and station metadata from the CGS California Strong-Motion Instrumentation Program (CSMIP), the USGS National Strong-Motion Project (NSMP), the USGS Advanced National Seismic System, and other affiliates. The CESMD has been continuously improving its webtools to facilitate the access of strong-motion data and metadata for use in post-earthquake response and for scientific and engineering research applications. The Center provides raw and processed strong-motion data via the Engineering Data Center (EDC) and the Virtual Data Center (VDC) web portals. This paper focuses on the strong-motion products provided by the EDC where more than 48,000 records with peak ground accelerations greater than 0.1% g from over 2400 earthquakes are currently hosted. and on the ongoing efforts to develop data access tools and applications. The new developments and ongoing efforts in the EDC include: 1) enhancements to the CESMD webservices to facilitate access to station metadata, earthquake information, and strong motion records 2) new features to the interactive map interface, improving the visualization and access to earthquake, station, and record information, 3) efforts to develop a new web application tool for data format conversion from a number of data formats, 4) efforts to unify varying waveform data formats into a consistent format, 5) ongoing efforts to compile seismic station site geology, measured or inferred Vs30 values, shear-wave profiles, NEHRP site class, and available structural instrument deployment schematics, and 6) a special studies pages for research topic-specific ground motion datasets that offer uniform processing of records from a variety of sources.

Conference Paper

Combining scanning electron microscopy, X-ray diffraction, and X-ray fluorescence to characterize shear zones at the Pogo gold deposit, Alaska

This study employs a multi-method analytical approach to characterize the mineralogical, geochemical, and textural properties of fault rocks from the Pogo gold mine in the Yukon-Tanana Upland, central Alaska. Specifically, we examine cataclasites, to document the structural and geochemical evolution of shear zones and their associations with gold mineralization. To investigate the shear zone, we integrate portable X-ray fluorescence (pXRF), scanning electron microscopy-based automated mineralogy (SEM-AM), X-ray diffraction (XRD), and high-resolution micro-X-ray fluorescence (micro-XRF) mapping. These methods collectively provide insights into bulk and trace element chemistry, mineralogical composition, and deformation-related textures across multiple scales. Handheld pXRF enables rapid geochemical screening, guiding SEM-AM and XRD analyses to ensure consistent mineralogical interpretation. X-ray diffraction identifies and quantifies crystalline phases, while SEM-AM produces high-resolution mineral maps, revealing mineral abundances, grain-scale textures, and gold associations. Micro-XRF mapping further refines our understanding by showing visual trace element distributions at sub-millimetre resolution. By integrating these techniques, we improve our understanding of the nature and geochemistry of Pogo shear zones, their role in gold mineralization, and support metallurgical processing strategies. This approach enhances exploration models and resource characterization for structurally complex gold deposits.

Alaska

U.S. Geological Survey global seabed mineral resources

The U.S. Geological Survey (USGS) provides science and data on seabed mineral resources and ecosystems, as well as on the potential hazards associated with extraction. The Nation relies on minerals for infrastructure, technology, manufacturing, and energy production. Critical minerals are essential to the economic and national security of the United States and have a supply chain vulnerable to disruption. For decades, USGS scientific innovation has contributed to the delineation of seabed mineral resources, the mechanisms of seabed mineral formation, and the environmental impacts of resource extraction. Since 1962, the USGS has also led scientific inquiries into the potential for deep sea mining. By providing impartial science on seabed minerals and their environmental setting in the deep oceans, the USGS enables decision-makers to evaluate the best practices for mineral resource development.

Fact Sheet

Birds, breakpoints, and baselines: How citizen science data can reveal ecological boundaries in Kenya’s Upper Tana watershed

Tropical watersheds are increasingly threatened by climate change, land-use conversion, and resource extraction, yet conventional biodiversity monitoring in these systems is often spatially and temporally limited. Citizen science offers a complementary approach, enabling biodiversity data collection over large areas that can supplement professional scientific surveys. We analyzed 10 years (2012–2022) of Upper Tana Watershed bird data from the Kenya Bird Map project, covering 114 pentads (9 × 9 km) within a 17,000 km 2 watershed to assess patterns of bird community composition and distribution across this watershed and to also evaluate the effects of environmental variables, seasonality, and sampling effort to help inform improvements in future citizen science projects. Citizen (or community) scientists recorded 575 species (>50% of Kenya’s total avifauna) in 74 families. Asymptotic species accumulation indicates that most probable species present in the watershed were detected. Threshold indicator taxa analysis revealed distinct ecological boundaries along elevation (∼1,500 m), precipitation (∼1,100 mm), and mean temperature (∼19°C) gradients, corresponding to a turnover from xeric savanna to mesic montane forest assemblages. Notably, bird communities showed little seasonal differentiation between wet and dry periods, consistent with dominance by resident year-round species. Data limitations including uneven survey distribution and frequency, absence of abundance metrics, and coarse representation of local environmental conditions that likely reduced our ability to detect fine-scale species–habitat relationships. Addressing these gaps through spatially balanced sampling at greater resolution, greater survey frequency in underrepresented areas, and improved capture of habitat metrics could strengthen the use of citizen-science bird data for watershed bioassessment. Our findings demonstrate that structured citizen-science initiatives can identify ecological boundaries and inform adaptive management of tropical socio-ecological systems under rapid environmental change.

Upper Tana watershed

Estimating the probability of elevated nitrate (NO2+NO3-N) concentrations in ground water in the Columbia Basin Ground Water Management Area, Washington

Logistic regression was used to relate anthropogenic (man-made) and natural factors to the occurrence of elevated concentrations of nitrite plus nitrate as nitrogen in ground water in the Columbia Basin Ground Water Management Area, eastern Washington. Variables that were analyzed included well depth, depth of well casing, ground-water recharge rates, presence of canals, fertilizer application amounts, soils, surficial geology, and land-use types. The variables that best explain the occurrence of nitrate concentrations above 3 milligrams per liter in wells were the amount of fertilizer applied annually within a 2-kilometer radius of a well and the depth of the well casing; the variables that best explain the occurrence of nitrate above 10 milligrams per liter included the amount of fertilizer applied annually within a 3-kilometer radius of a well, the depth of the well casing, and the mean soil hydrologic group, which is a measure of soil infiltration rate. Based on the relations between these variables and elevated nitrate concentrations, models were developed using logistic regression that predict the probability that ground water will exceed a nitrate concentration of either 3 milligrams per liter or 10 milligrams per liter. Maps were produced that illustrate the predicted probability that ground-water nitrate concentrations will exceed 3 milligrams per liter or 10 milligrams per liter for wells cased to 78 feet below land surface (median casing depth) and the predicted depth to which wells would need to be cased in order to have an 80-percent probability of drawing water with a nitrate concentration below either 3 milligrams per liter or 10 milligrams per liter. Maps showing the predicted probability for the occurrence of elevated nitrate concentrations indicate that the irrigated agricultural regions are most at risk. The predicted depths to which wells need to be cased in order to have an 80-percent chance of obtaining low nitrate ground water exceed 600 feet in the irrigated agricultural regions, whereas wells in dryland agricultural areas generally need a casing in excess of 400 feet. The predicted depth to which wells need to be cased to have at least an 80-percent chance to draw water with a nitrate concentration less than 10 milligrams per liter generally did not exceed 800 feet, with a 200-foot casing depth typical of the majority of the area.

Washington

Advancing subsurface investigations beyond the borehole with passive seismic horizontal-to-vertical spectral ratio and electromagnetic geophysical methods at transportation infrastructure sites in New Hampshire

The U.S. Geological Survey (USGS), in cooperation with the New Hampshire Department of Transportation (NHDOT), surveyed transportation infrastructure sites using rapidly deployable geophysical methods to assess benefits added to a comprehensive site characterization with traditional geotechnical techniques. Horizontal-to-vertical spectral-ratio (HVSR) passive-seismic and electromagnetic-induction (EMI) methods were applied at 4 sites including a roadway-stream crossing, roadway-bridge rail-trail crossing, commuter-parking expansion, and a railroad-adjacent river-cutbank slope-failure site. Additionally, ground-penetrating-radar (GPR) was used at the slope-failure site. Typically, subsurface geotechnical properties are determined from boring data; however, borings are often spaced hundreds of feet apart, potentially missing important spatial variability between boreholes. Geotechnical site characterization including geophysical surveys helped provide a more accurate characterization by using continuous or near continuous profiling. Three-component ambient noise measured with HVSR methods were used to determine resonance frequency and estimate sediment thickness. The method works when there is a strong shear-wave acoustic impedance contrast (> 2:1) between sediment and bedrock. Sediment thickness estimates from HVSR measurements were combined with boring data to make detailed maps of the bedrock surface altitude. The bulk electrical conductivity of the subsurface was indirectly measured with EMI methods and was used to identify lithologic variations, shallow bedrock, and conductive groundwater. Ground penetrating radar, which transmits pulses of electromagnetic energy into the subsurface and records the amplitude and timing of reflected signals, was used to identify bedding and changes in lithology or water content. By combining geophysical and boring data analyses, transportation projects produced more spatially comprehensive representations of geotechnical subsurface conditions than would be determined using conventional borings alone.

New Hampshire

A global database of soil microbial phospholipid fatty acids and enzyme activities

Soil microbes drive ecosystem function and play a critical role in how ecosystems respond to global change. Research surrounding soil microbial communities has rapidly increased in recent decades, and substantial data relating to phospholipid fatty acids (PLFAs) and potential enzyme activity have been collected and analysed. However, studies have mostly been restricted to local and regional scales, and their accuracy and usefulness are limited by the extent of accessible data. Here we aim to improve data availability by collating a global database of soil PLFA and potential enzyme activity measurements from 12,258 georeferenced samples located across all continents, 5.1% of which have not previously been published. The database contains data relating to 113 PLFAs and 26 enzyme activities, and includes metadata such as sampling date, sample depth, and soil pH, total carbon, and total nitrogen. This database will help researchers in conducting both global- and local-scale studies to better understand soil microbial biomass and function.

Scientific Data

Simulation of groundwater flow and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River affects agricultural, municipal, and industrial water users and is an important concern in the Western United States. In the Paradox Valley of southwestern Colorado, natural discharge of sodium-chloride brine to the Dolores River from the underlying core of a salt-valley anticline accounts for about 6 percent of the salinity load to the Colorado River. Formation of the Paradox Valley began during the Miocene, and subsequent erosion exposed the Pennsylvania Paradox Formation in the core of the anticline where a cap rock, collapse features, breccia, and sodium-chloride saturated brine developed at the top of the exposed salt diapir. The discharge of brine to the Dolores River is affected by these dissolution features, along with seasonal hydrologic conditions and density-dependent flow between older dense brine and the younger fresh groundwater in the overlying alluvial aquifer. To reduce TDS concentrations in the Dolores River through the Paradox Valley, the Bureau of Reclamation has pumped brine from a series of shallow wells adjacent to the river since July 1996. The pumped brine is collected and piped to a deep disposal well where it is injected into the Mississippian Leadville Limestone at a depth of about 4,570-meters below land surface. The pumping and injection operation is collectively known as the Paradox Valley Unit (PVU), and by 2015, the PVU had substantially reduced TDS concentrations in the Dolores River by about 70 percent. Since 2019, injection-pressure limits and related seismic activity have constrained deep-well injection and thus brine pumping at the PVU. In cooperation with the Bureau of Reclamation, the U.S. Geological Survey developed a MODFLOW-6 three-dimensional, variable-density groundwater flow and TDS transport model of the Paradox Valley to evaluate the effects of PVU pumping operations on brine discharge to the Dolores River and to guide additional research. The finite-difference model grid consists of 76 rows and 48 columns oriented from northwest to southeast in alignment with valley topography and groundwater-flow directions in the near-surface freshwater alluvial aquifer. A 7-layer hydrogeologic framework was developed from existing datasets to represent the alluvial aquifer, cap rock, collapse breccia, and groundwater flow and TDS transport from the underlying Paradox Formation salt to the Dolores River. The model represents a 33-year transient calibration period from 1987 through 2020 that includes pre-PVU conditions from 1987 through June 1996 and post-PVU conditions from July 1996 through 2020. A 1,000-year simulation of groundwater flow and coupled TDS transport computed the initial conditions for the subsequent 33-year transient simulation. Observations of precipitation, streamflow, evaporation, agricultural land use, and PVU brine pumping rates were used to specify appropriate boundary conditions to the model representing time-varying recharge, tributary streamflow, groundwater underflow, evapotranspiration (ET), and PVU pumping. Values for average monthly streamflow and TDS concentration at the upstream streamgage, the Dolores River at Bedrock (USGS streamgage 09169500), were specified as model input where the Dolores River enters Paradox Valley. Observed pumping from the PVU, water levels and TDS concentrations in groundwater, and streamflow and estimated TDS concentrations at the downstream streamgage, the Dolores River near Bedrock (USGS streamgage 09171100), were calibration targets that constrained the manual calibration of model parameters representing aquifer hydraulic conductivity, storage, streambed conductance, recharge, and (ET). Two primary model-calibration targets were the match between observed and simulated TDS mass flux from PVU pumping wells and the match between estimated and simulated TDS mass flux to the Dolores River. The simulated TDS mass withdrawn by pumping wells is calculated by the model as the product of the assigned pumping rate and simulated groundwater TDS concentrations. Because actual pumping rates were assigned as simulated values, the total simulated PVU pumping for the 33-year calibration is within 0.5 percent of the observed values. However, simulated concentrations and thus mass flux of TDS withdrawn by the PVU pumping wells were consistently about 26 percent less than observed values for all the simulated time periods (33-year simulation, pre-PVU, and post-PVU). The representation of brine inflow was explored through additional modeling to evaluate the effect of the simulated brine source on groundwater TDS concentrations. Results indicated that a saturated-salt constant-flux brine source best replicated the magnitude and transient pattern observed for TDS mass flux from PVU pumping wells. The simulated TDS mass flux to the Dolores River is compared to estimates based on observed streamflow and specific conductance (SC) data for the downstream streamgage. The calibrated model provided a close fit of simulated to measured streamflow at the downstream streamgage, and the calibrated model fit to estimated TDS concentrations at the downstream streamgage was reasonable. The greatest differences between simulated and estimated values occurred during drought periods from June 2000 to March 2003, May 2012 to June 2013, and October 2013 to October 2014, when simulated TDS concentrations in the river were greater than estimated concentrations. In general, simulated TDS mass flux to the river for the pre-PVU period is in good agreement with estimated values (2-percent difference), but the model overestimated TDS mass flux to the river by about 41 percent during the post-PVU period. The model uncertainty with respect to TDS mass flux to the river indicates other processes or model parameters not well represented by the model are affecting the system, especially during drought. During model calibration, the most sensitive parameters were identified as vertical hydraulic conductivity of the alluvial aquifer, conductance of the Dolores River streambed, ET extinction depth and rate, and recharge rate. Five 5-year scenarios of conditions for 2021–25 were simulated to assist evaluation of alternative strategies to manage the discharge of brine into the Dolores River. The first scenario simulates no PVU pumping and serves as a base case for comparison to the other scenarios. Two scenarios simulate the effects of varying withdrawal timing at an annual rate about one-third less than during 2010 through 2018. During high-flow spring snowmelt runoff periods when brine discharge is naturally minimized, PVU pumping does not substantially affect salinity in the Dolores River, and comparison of these two scenarios indicates that scheduling brine withdrawals during times of low river stage is nearly as effective at reducing TDS mass flux to the river as pumping brine year-round. Cessation of pumping during periods of high river stage may be advantageous for system maintenance, brine injection, and seismic-risk reduction. The fourth scenario tested the effect of reducing irrigation-return flow on brine discharge and predicted a slight reduction of TDS mass flux to the Dolores River, but not as great a reduction as that of using the PVU to remove brine. The fifth scenario simulated 5 years of drought conditions without PVU pumping and indicates brine discharge during drought about 15 percent greater than during average hydrologic conditions. Results from scenario 5 are consistent with the calibrated model results and indicate that aquifer properties and ET processes and parameters may be affecting simulation results during drought. The Paradox Valley groundwater model provides a reasonable overall match to observed conditions in the Dolores River. The model is useful for evaluating relative differences between brine management scenarios to inform PVU operational decisions and to identify gaps in data and process understanding. Representation of the brine source, hydraulic-conductivity parameters, and recharge and ET processes were identified as potential areas for additional field and modeling research. Additional research in the Paradox Valley might include field-data collection that provides additional information on the hydrogeologic framework, groundwater levels, groundwater TDS concentrations, stream characteristics, and aquifer properties. Additional modeling efforts could benefit from applying advanced tools for model development, calibration, and visualization including parameter-estimation and sensitivity analysis. Statistical evaluation of known model uncertainties such as hydraulic conductivity, streambed conductance, representations of the brine source, recharge, and ET could improve the match between simulated and estimated TDS mass flux from PVU pumping wells and to the Dolores River further informing model predictions and system understanding for the Paradox Valley.

Colorado

Summary of selenium in the lower Gunnison River Basin, Colorado—Information and data gaps

The Cretaceous Mancos Shale is a geologic source of selenium in the lower Gunnison River Basin. Natural weathering processes and human activity mobilize selenium from the Mancos Shale and derived materials, and surface water, groundwater, and sediment all affect the transport of selenium from source areas to receiving streams and biota. Selenium accumulates through the aquatic food chain, and its toxic effects can result in invertebrate mortality and mortality, decreased reproduction, and deformities to fish and birds. The Bureau of Reclamation, in cooperation with the State of Colorado and Gunnison River Basin water users, is implementing a Selenium Management Program to reduce selenium concentrations in the lower Gunnison River Basin of Colorado. Goals of the Selenium Management Program are to (1) achieve compliance with the State of Colorado chronic aquatic-life standard for dissolved selenium (4.6 micrograms per liter) in the Gunnison River near Grand Junction, Colorado; (2) sufficiently improve water-quality conditions to assist in the recovery of endangered species in the Gunnison and Colorado Rivers by reducing selenium concentrations; and (3) support continued water uses in the basin. Many previous studies have contributed to the understanding of selenium in the environment; however, monitoring and research data gaps exist in the lower Gunnison River Basin. The purpose of this report is to summarize information regarding selenium in the lower Gunnison River Basin and describe strategies for scientific research and monitoring to potentially improve understanding of selenium sources; processes affecting the mobilization, transport, and fate of selenium; and the effects of selenium-mitigation projects in the lower Gunnison River Basin. Monitoring and research data gaps discussed in this report include geologic mapping and geochemical source characterization, long-term and ongoing monitoring of the surface-water and groundwater networks, developing and refining statistical models, characterizing selenium on suspended sediment, modeling selenium in the food web, evaluating best management practices, and more.

Colorado

Preliminary depth to basement modeling at Salton Sea, California

The San Andreas Fault – Imperial Fault (SAF-IF) transtensional step-over zone along the southern margin of the Salton Sea hosts substantial geothermal production and lithium brine resources. Recent volcanism at the Salton Buttes and active seismicity along the SAFIF fault system highlight active tectonic and magmatic processes that pose natural hazards and may impact energy and mineral production. Characterizing the subsurface architecture and extent of concealed alteration associated with this tectono-magmatic system enhances understanding of these active processes, associated hazards, and resources. We have compiled a gravity database, consisting of new and re-processed existing data, from which we have constructed a new isostatic residual gravity anomaly map of the Salton trough. We have used this new gravity dataset together with a compilation of publicly available borehole data to develop new depth to basement inversion models for the region. These depth to basement models help to constrain basin geometries, inform alteration mapping, and reveal variations in basement rocks. Due to the concealed nature of the complex tectonic framework at the Salton trough, it is necessary to utilize geophysical methods for subsurface characterization. These new depth to basement models are a first step toward constructing 2D and 3D geophysical and geologic models of the Imperial Valley and Salton Sea geothermal area. This analysis complements other geophysical initiatives, including magnetotelluric (MT) modeling (Tokmakoff et al., 2024), magnetic mapping (Glen and Earney, 2023, 2024) and potential field modeling, and seismic studies focused on hazard and resource investigations in the Imperial Valley.

California