Geology ReportsSearch

SEARCH · Geology Reports

Results for “Nature Climate Change”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

668 records · Page 15Linked to original sources

Simulating present and future groundwater/surface-water interactions and stream temperatures in Beaver Creek, Kenai Peninsula, Alaska

In many places, coldwater ecosystems are facing increasing pressure from anthropogenic warming. This study examined stream temperatures and the water balance in the Beaver Creek watershed on the Kenai Peninsula in south-central Alaska—an area that is experiencing rapid warming. Low-gradient streams near the Kenai coast provide important spawning and rearing habitat for salmon but may be especially vulnerable to rising temperatures, because of long residence times, inflows from abundant riparian wetlands, and reliance on groundwater discharge that may also warm, or decrease in volume with rising evapotranspiration. In recent decades, observed maximum 7-day temperatures have consistently exceeded statistical (regression-based) projections. Here we simulate total streamflows and temperatures with a physics-based model that links the Soil Water Balance, MODFLOW 6 and SNTEMP simulation codes on a 7-day timestep. The model is based on existing data and groundwater levels, instream flows, and stream temperatures collected during 2019–23. Future climate scenarios were developed for 2023–50 from downscaled climate projections. Results indicate that groundwater discharge is about 64 percent of the total streamflow during the months of May through September. Total streamflow and groundwater discharge are expected to remain similar to current conditions through 2050. Stream temperatures are expected to rise; by midcentury, near the Beaver Creek mouth the model predicts 34 to 63 additional days per year with average weekly temperatures above 13 degrees Celsius, 14 to 81 additional days with average weekly temperatures above 15 degrees Celsius, and routine exceedances of 20 degrees Celsius during the warmest periods. Projected stream temperatures vary spatially. Areas of high groundwater inflows in the lower main stem and some tributaries may be most resilient to warming air temperatures during dry conditions. During storm events, groundwater-dominated tributaries may have the coolest stream temperatures.

Alaska

Quantitative mineral resource assessment of lithium pegmatite deposits in the southern Appalachian orogen

The first quantitative mineral resource assessment for undiscovered lithium pegmatite deposits in the southern Appalachian region of the United States was conducted. Permissive tracts for lithium pegmatite deposits were delineated by integrating lithological, tectonic, geochemical, geophysical and mineral occurrence data. Lithium pegmatite prospectivity of the tracts was ranked with simplified mappable criteria, including proximity to Paleozoic felsic intrusions and major lithotectonic structures, stream sediment geochemical anomalies, and pegmatite occurrence data. The geospatial data and permissive tracts were used to estimate the number of undiscovered lithium pegmatite deposits. These estimates were integrated into probabilistic simulations along with a new global lithium pegmatite grade and tonnage dataset to quantify potential contained undiscovered lithium resources. An economic filter was applied to convert the probabilistic estimates of contained lithium into recoverable material. The identified lithium pegmatite resources for the Carolina Lithium and Kings Mountain deposits, North Carolina, contain 1589 thousand tons (kt) of Li 2 O. The median contained undiscovered resource for the southern Appalachian orogen was estimated to be 2240 kt Li 2 O. At 90% confidence, the region contains at least 130 kt Li 2 O, and 10,700 kt at 10% confidence. After applying economic filters, the median recoverable contained resource was 1430 kt Li 2 O, corresponding to approximately 201 years of current lithium imports for consumption in the United States. North and South Carolina are likely to contain most of these resources. Coarse data resolution and intra-state variations in the geological data contribute to uncertainty of undiscovered lithium pegmatite resources. Continued efforts to harmonize disparate geospatial datasets with updated or new information can improve the accuracy and precision of estimated undiscovered lithium pegmatite resources in the study area and at broader scales.

Alabama, Georgia, Maryland, North Carolina, South

As above, so below? A framework for integrating long-term water quantity trends reveals divergent patterns in groundwater and low streamflow across the United States

Climate, land-use, and disturbance drive long-term global trends in groundwater levels and streamflow. At large scales, these trends are typically considered separately, despite the well-established concept that groundwater and surface water comprise a single resource. Joint trend assessment at national scales is challenging because it requires pairing and aggregating data from spatially disparate streamflow and groundwater monitoring sites for which no established framework exists. Here, we evaluate alternative approaches for integrating groundwater and streamflow data to enable joint trend analysis—a critical step toward understanding how water-budget components respond concurrently and interactively to environmental drivers. Mann–Kendall trends were computed for individual groundwater (annual mean depth) and streamflow (annual low of 7 d averages) sites across the U.S over 21- (2000–2020), 31- (1990–2020), and 41-year (1980–2020) periods. Regional Kendall trends were calculated using five spatially contiguous and noncontiguous regional classifications for aggregation based on subsurface (e.g. aquifer, geology) and surface (e.g. watershed, landscape) characteristics. Site-level results revealed contrasting trends, with tendencies toward increasing low flows (wetting) and increasing groundwater depths (drying). Agreement between streamflow and groundwater trends increased with regional aggregation and longer timeframes, though persistent skew toward streamflow wetting and groundwater drying remained. Results varied by region and trend period, with notable consistencies: unified drying in the West/Southwest and wetting in the Upper Midwest. Directional mismatches in long-term trends were prominent in the High Plains and Mississippi Alluvial Plain, whereas near-term mismatches were most evident in the Northwest. Aggregation by hydrologic landscape regions (HLR) yielded the greatest agreement between groundwater and streamflow trends. These findings indicate that coupled responses may represent combined influences of climate, relief, and geology, as captured by HLR, more strongly than geography or geology alone. Integrated water availability assessments may benefit from a multi-characteristic classification framework to treat groundwater and surface water as a unified resource.

Environmental Research: Water

Observations of tear-drinking by lepidopterans on moose ( Alces alces americana ) in northeastern North America

Lepidoptera have long been known to feed on the tears of vertebrates as a presumed source of minerals or nutrients. While this unusual behavior has been observed in a variety of species, only a single previous record has been documented outside of the tropics. Here, we present the first documentation of moths visiting the eyes of a bull moose ( Alces americanus americanus ), captured via trail camera in Green Mountain National Forest, Vermont, United States. We discuss the biogeography of this behavior, how it may differ between tropical and temperate climates, and its potential impact on moose health.

Vermont

Evolution of permeability and strength recovery of shear fracture under hydrothermal conditions

Geothermal energy is a clean and renewable resource that depends on the ability to move water through hot rock. In many locations, the ability to move water through rock requires the presence of extensive natural or human-made systems of fractures. However, these fracture systems are influenced by a variety of complex processes that occur at the temperature and pressure conditions found in geothermal reservoirs. To make geothermal systems more efficient, it is important to understand how these fractures evolve over time in response to these processes. This study explored how fractures in rock change under high-temperature and pressure conditions, like those found in geothermal reservoirs, through laboratory experiments and numerical simulations. In general fractures, tend to close due to pressure from the surrounding rock preventing the flow of water. One set of laboratory experiments revealed that fractures in granitic rock can weaken over time at elevated temperatures. These weak fractures can then slip slowly potentially keeping the fracture open for a longer period. This study also showed that at the highest temperature examined (250 °C) large differences between the chemical composition of the rock and the fluid moving through it could improve water flow temporarily likely due to the water dissolving parts of the rock. Flow rate predicted by models shows overall good agreement with the flow rate measured in our experiments but with some long time-scale variations that may be due to mechanical wear of the fracture surface. A second set of experiments found that, over the temperature range examined, the closure of fractures was caused by brittle failure driven by high stresses at points where fracture surfaces were in contact. This result suggests that fracture closure in geothermal reservoirs could be counteracted by maintaining high pore pressures. Additionally, we also tested a new method using electrical resistance to measure fracture closure in controlled systems with high precision.

Final Technical Report

Depth of magma crystallization and fluid exsolution beneath the porphyry-skarn Cu deposits at Santa Rita and Hanover-Fierro, New Mexico, USA

The depth level at which porphyry Cu–forming magmas fractionated and exsolved mineralizing fluids is actively debated. In the classic model, extensive magma fractionation occurs in large, upper crustal magma chambers, and concomitant fluid exsolution leads to forceful expulsion of residual magmas in the form of porphyry dikes, stocks, and breccia pipes, which subsequently serve as pathways for the mineralizing fluids. In contrast, some recent studies highlighting the role of deep crustal magma fractionation in the production of fertile magmas essentially deny the existence of upper crustal magma chambers at the time of mineralization. To address this, we conducted a detailed thermobarometric investigation of 13 intermediate to felsic, porphyritic intrusive rocks related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, United States, representing two premineralization magmas (61–60 Ma), seven synmineralization magmas (60–58 Ma), and four late- to postmineralization magmas (58–57 Ma). For each sample, the pressure of last magma crystallization before final magma ascent to the current exposure level was reconstructed based on Al-in-hornblende barometry of small hornblende inclusions trapped within quartz phenocrysts and through titanium-in-quartz (TitaniQ) thermobarometry of the host quartz phenocrysts themselves. Since quartz is one of the last crystallizing magmatic minerals, and no significant phenocryst growth could have occurred in small dikes and stocks after final magma emplacement, quartz phenocrysts and their contained hornblende inclusions record the depth of last magma crystallization before final magma ascent. When present, hornblende phenocrysts and hornblende inclusions within other major phenocrysts were also analyzed. Both quartz and hornblende barometers return consistent average pressures of 3.2 ± 0.4 kbar for the entire suite of pre- to postmineralization magmas, corresponding to depths of 11 to 14 km. The synmineralization magmas return even more consistent average pressures of 3.1 ± 0.2 kbar, corresponding to a depth of 12 ± 1 km. The volume of the mineralizing porphyry dikes and stocks at the emplacement level is far too small to have provided all the fluids and metals required to form the observed ore deposits. Therefore, the majority of the ore-forming fluids must have originated from the magmas that crystallized at 12 ± 1 km depth. The ore deposits, conversely, formed at ~5-km paleodepth. This implies that most of the mineralizing fluids traveled an average vertical distance of ~7 km from their magmatic source to the eventual site of ore precipitation. The relatively unaltered nature and low veining degree of deeper parts of mineralized porphyry dikes and stocks suggest that the fluid transport through these intrusive bodies occurred mostly at near-solidus conditions by means of fluid percolation along grain boundaries. In summary, our results suggest that (1) a large, upper crustal pluton exists ~7 km beneath the Santa Rita and Hanover-Fierro deposits; (2) abundant phenocryst crystallization occurred at this depth level; and (3) this pluton was the main source for the exsolution of ore-forming fluids. However, the investigated rocks have elevated whole-rock Sr/Y ratios, indicating magma fractionation at deep crustal levels. As a result, our preferred model is a combination of the two end-member models introduced above, with most magma fractionation having occurred in the deep crust and with residual, intermediate to felsic melts having ascended and accumulated at 11 to 14 km paleodepth, where they continued to crystallize with comparatively little crystal-liquid separation, before some of these magmas ascended further to shallow levels and quenched to porphyries.

New Mexico

Reservoir evolution, downstream sediment transport, downstream channel change, and synthesis of geomorphic responses of Fall Creek and Middle Fork Willamette River to water years 2012–18 streambed drawdowns at Fall Creek Lake, Oregon

Executive Summary Chapter A. Introduction Fall Creek Dam impounds Fall Creek Lake, a 10-kilometer-long reservoir in western Oregon and is operated by the U.S. Army Corps of Engineers (USACE) primarily for flood-risk management (or flood control) in late autumn through early spring months, as well as for water quality, irrigation, recreation, and habitat in late spring through early autumn. Since 2011 (water year [WY] 2012), Fall Creek Lake has been temporarily drawn down each year to facilitate downstream passage of juvenile spring Chinook salmon ( Oncorhynchus tshawytscha ) through the 55-meter (m) high dam. This annual dam operation is temporary, typically lasting about 1–2 weeks from WY 2012 through 2020 (drawdown operations in WY 2022–24 have increased to more than 6 weeks). Drawdown of the reservoir results in lake levels being lowered to the elevation near the historical, pre-dam streambed. The annual streambed drawdowns of WY 2012–18 have improved fish passage and led the USACE to formally adopt streambed drawdowns as part of annual operations at Fall Creek Dam. However, temporarily lowering the lake to streambed creates free-flowing conditions in the reservoir that result in the erosion and episodic export of predominantly sand and finer-grained sediments (less than 2 millimeters [mm]) to the lower gravel-bed reaches of Fall Creek and the Middle Fork Willamette River. The introduction of large volumes of sand and finer-grain sediment into the dam-regulated reaches downstream from Fall Creek Dam prompted questions about the geomorphic responses to annual streambed drawdowns within Fall Creek Lake and downstream reaches along Fall Creek and the Middle Fork Willamette River. The U.S. Geological Survey (USGS) in partnership with USACE initiated a comprehensive geomorphic and sediment transport investigation to assess the coupled processes of reservoir erosion, sediment evacuation from Fall Creek Lake, and patterns of sediment transport and deposition in reaches downstream from the Fall Creek Dam that have resulted from annual streambed drawdowns. The purpose of this report is to systematically describe the processes of sediment erosion, transport, and deposition at Fall Creek Lake and geomorphic interactions between reaches upstream and downstream from Fall Creek Dam that relate to dam operations. Specifically, this report focuses on evaluating geomorphic responses to streambed drawdowns from WY 2012 through 2018 and placing drawdown-induced geomorphic responses within the broader context of physiographic and historical conditions and dam operations of Fall Creek and Middle Fork Willamette Rivers. Key objectives for this study were to characterize changes in reservoir morphology and substrate at Fall Creek Lake, describe the character and temporal pattern of sediment transport downstream from Fall Creek Dam, characterize geomorphic changes in channel reaches downstream from the Fall Creek Dam, and relate these data to the annual streambed drawdowns of WY 2012–18. This study uses multiple independent monitoring and measurement approaches to assess site, reach, and river-scale geomorphic responses to drawdowns to inform dam and reservoir management. Patterns and processes of reservoir evolution were assessed with geomorphic mapping and volumetric analyses of topography through comparison of multiple digital surface models (DSMs). Just downstream from Fall Creek Dam, analyses of sediment export from the reservoir focused on suspended sediment but also incorporated bedload analyses to assess sediment sizes. Geomorphic assessments downstream from the dam used reach-scale and site-scale approaches to document changes in channel morphology and substrate, including site measurements of sand and finer-grained sediment deposition and in-channel bed-material, volumetric change analyses from comparison of digital elevation models (DEMs), and repeat geomorphic mapping. Findings from this study inform river management and dam operations by providing an understanding of (1) coupled upstream-downstream geomorphic responses to the Fall Creek Lake streambed drawdowns, (2) geomorphic responses of Fall Creek Lake streambed drawdowns in comparison to drawdowns at other large dams, (3) controls on reservoir erosion and downstream geomorphic responses, and (4) implications for future hydrogeomorphic changes that may result from continued drawdowns and monitoring activities to assess those changes. Chapter B. Reservoir Morphology and Evolution Related to Dam Operations at Fall Creek Lake To understand the volume and distribution of sediment accumulation in Fall Creek Lake since dam closure in 1965, decadal-scale sedimentation patterns (spanning approximately 1965–2016) are evaluated using a combination of storage curve analyses and geomorphic mapping. Short-term (drawdown event-scale) patterns of erosion, sedimentation, and sediment export downstream are evaluated using a combination of geomorphic mapping and change detection analyses that quantify the distribution and total volume of sediment erosion and deposition within Fall Creek Lake. Geomorphic mapping of reservoir topography and analyses of historical datasets reveals four categories of landforms and sediment processes within Fall Creek Lake related to lake level operations: lacustrine sedimentation expressed in the reservoir floor, fluvial erosion and deposition within historical stream channels during streambed drawdowns, channel-like features created by erosion within the reservoir floor during streambed drawdowns, and erosion on reservoir hillslopes. Where the reservoir floor is mapped for this study as pelagic (deep water), deposition up to 3 meters (m) thick by lacustrine processes and burial of pre-dam topography with deposits thinning toward the edges of the valley floor and upstream areas of reservoir are observed. Despite over 50 years of sediment accumulation since dam construction, the main stream channels of Fall and Winberry Creeks (or reservoir thalwegs) through the reservoir are well defined, though their distinct morphology is likely influenced by a long history of recurring historical drawdowns to or near streambed since dam construction. Unregulated streamflow and sediment transport through the reservoir primarily are confined to these channels during the streambed drawdown periods. Erosional channel-like features created by drawdowns are carved through underlying, unconsolidated reservoir floor sediments and are most prominent in the lower reservoir below minimum conservation pool (the low pool elevation during winter flood season); sediment generated from the formation of these drawdown channels is more likely to be transported through and out of the reservoir than sediment deposits along the reservoir hillslopes at the valley margins that are separated from main channels by areas of low-gradient reservoir floor. Morphologic changes in the lower reservoir topography between January 2012 and November 2016 indicate overall net erosion of about 129,500 cubic meters (m 3 ). The most prominent geomorphic changes occurred along the main channels of Fall and Winberry Creeks near the Fall Creek Dam where incision, lateral migration, and slumping banks resulted in vertical and lateral adjustments to channel position, whereas most changes fell below the detectable limit on higher-elevation reservoir floor surfaces except where erosion occurred along features mapped as drawdown channels. Chapter C. Sediment Delivery from Fall Creek Lake and Transport through Downstream Reaches USGS implemented a sediment monitoring program in WY 2013–18 to evaluate the quantity and character of reservoir sediment exported from Fall Creek Lake during streambed drawdowns. Turbidity and suspended sediments were monitored annually autumn through spring to span the WY 2013–18 streambed drawdowns; however, unequal monitoring timeframes each year reduced the ability to compare results and factors affecting sediment export from the reservoir difficult between years. These data were originally measured to develop regressions and compute suspended-sediment loads (SSL). Bedload sediment monitoring from a cableway at the Fall Creek streamgage was completed in the autumn-winter of WY 2013 and 2017. The limited number of samples and presumed variability in sediment supply from the reservoir precluded construction of streamflow and bedload discharge relations to compute more than instantaneous bedload. Sand and finer-grained silts and clays were transported from the reservoir in suspension, though some coarser grains (up to 32 mm) were also mobilized and transported downstream from the dam as bedload. Observations of increased sediment transport downstream from Fall Creek Dam coincided with lake levels approaching about 3 m (10 feet [ft] or elevation 690 ft) above the streambed regulating outlets. Suspended-sediment loads computed for the full monitoring periods WY 2013–18 at the Fall Creek streamgage, located 1.4 kilometers (km) downstream from Fall Creek Dam, range from 54,700 metric tons (t) in WY 2013 to 13,900 t in WY 2018. Although the total annual SSL varied from year to year, the overall seasonal patterns of suspended sediment transport throughout each year were similar during monitoring in WY 2013-18. Suspended-sediment loads were low prior to the drawdown, then increased rapidly as lake levels lowered and approached the streambed. In the weeks following the drawdown period, as pool levels were increased, SSL remained slightly elevated above pre-drawdown levels but generally declined through the following winter and spring except during streamflow-driven pulses of suspended-sediment transport. WY 2013 had the greatest total computed SSL for each streambed drawdown and partial-year monitoring period. SSL computed for the partial-year period have generally decreased since WY 2013 and have varied by about 6,800 t with the exception of WY 2014. WY 2014 SSL reflects anomalously low sediment export due to low streamflows and freezing conditions that stabilized reservoir floor deposits. Bedload measurements in the short 1.4-km reach between Fall Creek Dam and the Fall Creek streamgage showed an inverse correlation between bedload transport rates and discharge, which probably reflects diminishing supply of coarse-sized sediment. Sand was more abundant (60–100 percent) than gravel in bedload samples confirming sand and finer-grained sediment dominated sediment evacuated from the reservoir during streambed drawdowns at Fall Creek Lake. Chapter D. Geomorphic Responses to Fall Creek Lake Streambed Drawdowns Downstream from Fall Creek Dam In the days, weeks, and months following streambed drawdown operations at Fall Creek Dam through WY 2018, sites downstream from the dam displayed a variety of geomorphic responses to reservoir sediment delivery within the main channel and overbank areas. Evaluation of streambed elevations at two streamgages located 1.4 km downstream from the dam on Fall Creek and 16.3 km downstream from the dam on the Middle Fork Willamette River indicated the effects of drawdown sediment on bed elevations were modest and transient. Repeat particle size measurements (October 2015 and September 2016) at five sites along Fall Creek and the Middle Fork Willamette River showed similar grain-sized distributions that do not reveal substantial deposition of fine-grained sediment related to the WY 2016 streambed drawdown. Altogether, these findings indicate that transport capacity in the main, low-flow channels of Fall Creek and Middle Fork Willamette River during WY 2012–18 was sufficient to mobilize and evacuate reservoir sediments from streambed drawdowns or other bank material and tributary sources. However, other monitoring for this study indicate low-velocity zones in off-channel areas are prime locations for sand and finer-grain sediment deposition. Patterns of overbank sediment accumulation indicate that the magnitude and timing of overbank deposition on bars and low-elevation floodplain varies with proximity to the dam, geomorphic setting, streamflows, and other factors. Sand and finer-grained reservoir sediments carried as suspended-sediment load in the reaches downstream from Fall Creek Dam were deposited in overbank areas as observed with clay-horizon markers during WY 2016–17. Overbank deposition quantified with Geomorphic Change Detection (GCD) software evaluated landform-scale patterns of erosion and deposition using repeat light detection and ranging (lidar) surveys at two sites in the Upper Fall Creek reach and one site in the Jasper reach for 3 years (2012–15) and one site in the Clearwater reach for 6 years (2009–15). Deposition thickness and spatial patterns from the GCD analysis were variable; some sites had dispersed but measurable deposition while at others, deposition was highly localized and exceeded 1 m in depth. Patterns of overbank deposition illustrate interactions among bar morphology, local hydraulics, and suspended-sediment transport dynamics that can create patches of highly localized deposition. The measured deposition at the two Fall Creek GCD sites likely resulted from reservoir sediments released from Fall Creek Lake during streambed drawdowns in WY 2016 and 2017 because the limited sediment inputs from bank material (geomorphically laterally stable reach) or tributaries (no significant tributaries) provided few other sediment sources. On the Middle Fork Willamette River, observed patterns of overbank deposition could reflect sediment sourced from upstream tributaries, bank erosion, or Fall Creek Lake streambed drawdown operations. Despite the introduction of several thousand tons of reservoir sediment delivered from the Fall Creek Lake streambed drawdowns to below-dam river corridors, reach-scale mapping of channel features downstream from Fall Creek Dam shows minimal evidence of changes in channel planform or landforms that can be attributed to a drawdowns in WY 2012–16. On Upper Fall Creek reach, widespread increases in gravel bars or other in-channel sediment did not result from the five streambed drawdowns. The main changes attributable to sediment releases from Fall Creek Lake were localized increases in vegetated bar area, particularly on channel margin areas where sand and finer-grain sediment was deposited and rapidly colonized by vegetation. The area of mapped secondary water features decreased between 2005 and 2016, but that may be due to lower discharges depicted in the 2016 aerial photographs and less mapped area of inundation. Primary changes along the Lower Fall Creek reach include a 6.4 percent decrease in area of secondary water features between 2011 and 2016, and a nearly twofold increase in the area of unvegetated bars. Immediately downstream from the Fall Creek confluence, there were negligible changes in the location and areas of vegetated bars and the main wetted channel between 2005 and 2016, and local increases in bar area cannot be attributed solely to deposition of reservoir sediments from Fall Creek Lake because (1) areas along the Middle Fork Willamette River just upstream from the Fall Creek confluence display similar type and magnitude of changes and (2) some of the increases at the confluence area pre-date the drawdowns. The cumulative effect of sediment releases from Fall Creek Lake streambed drawdowns from WY 2012 to 2016 on downstream channel planform and landforms are modest compared to the river-scale transformations and planform changes that occurred in the decades following dam construction. Chapter E. Discussion of Geomorphic Responses of Fall Creek and Middle Fork Willamette River to Streambed Drawdowns at Fall Creek Lake Multiple aspects of Fall Creek Dam infrastructure and operations exert first-order controls on the magnitudes of reservoir erosion that occur during the streambed drawdowns and ultimately determine the sediment delivery to downstream reaches. Key aspects of the dam and its operations that are most relevant to assessing geomorphic responses to streambed drawdowns include the (1) dam infrastructure, including configuration and size of regulating outlets and their proximity to the streambed which dictates the capacity and competence of the river to deliver sediment to downstream reaches and mode of sediment transport as suspended-sediment load or bedload; (2) frequency of historical drawdowns and long-term, year-round dam operations and lake level management, which partly dictate reservoir morphology and locations and magnitudes of readily erodible materials; (3) dam operations and hydroclimatic conditions during the streambed drawdown (including length of the drawdown and streamflows entering the reservoir), which directly control the timing, duration and magnitude of reservoir erosion and sediment evacuation; and (4) dam operations following the streambed drawdown operation that regulate streamflows (and thereby sediment transport conditions) downstream of Fall Creek Dam which primarily reflect interactions between hydroclimatic conditions and flood control operations. Patterns of sediment erosion and evacuation observed in this study at Fall Creek Lake from WY 2012–18 suggest that reservoir erosion during annual streambed drawdowns may remain similar or decrease in future years assuming (1) annual streambed drawdown operations are implemented in similar manner as the WY 2012–18 drawdowns (in terms of duration, late autumn or early winter implementation, rate of pool-level lowering to reach streambed, and other factors), (2) streambed drawdowns coincide with similar conditions as were observed WY 2012–18 (similar sediment yield into reservoir, low reservoir inflows, limited precipitation, moderate air temperature), and (3) no major geomorphic changes in the main reservoir channels of Fall and Winberry Creeks occur (for example, channel avulsion). Under such conditions, it is hypothesized that the stream channel within the reservoir would achieve a quasi-equilibrium state with respect to annual influx and export of sediment and aided by the substantial amount of in-channel bedrock, will remain laterally stable without erosion across reservoir deposits. Patterns of sediment transport measured at the Fall Creek streamgage downstream from Fall Creek Dam provide insight into the potential effects of future streambed drawdowns at Fall Creek Lake. Analyses of suspended sediment measured in WY 2013–18 show a major reduction in suspended-sediment loads between WY 2013 and later years, indicating streamflows transporting sediment through the reservoir to downstream reaches during streambed drawdowns have become supply limited. The 6-year suspended-sediment monitoring and sampling program is insufficient to make predictions about future sediment transport conditions because of uneven monitoring periods and varying controls on reservoir sediment erosion. It is likely that future suspended-sediment loads will be variable but similar to those observed in WY 2015–18 if operational, climatic, and geomorphological factors remain similar to those monitored WY 2015–18. Suspended-sediment loads downstream from Fall Creek Lake will likely remain highest when regulating outlets are fully open and Fall Creek is free flowing with the reservoir fully drained with little to no residual pool. Over time, it is possible that the suspended-sediment loads would reflect mobilization of reservoir sediment deposited in the previous year rather than erosion of sediment deposited years or decades earlier. Bedload is likely to remain a small fraction of the total sediment load evacuated from the reservoir and is relatively modest compared with pre-dam bedload transport rates because most coarse sediment remains trapped by the dam. If sediment releases from Fall Creek Lake and ensuing streamflow conditions follow a similar pattern in the future as was assessed in this study spanning WY 2012–18, near-term geomorphic adjustments downstream of the dam are expected to be modest. Barring major operational, climatic, and geomorphological changes, local site-scale deposition on bars, overbank areas, or off-channel features that persists several months after the streambed drawdown will likely continue to be highly variable, ranging from negligible to several centimeters of deposition. At the landform-scale, low velocity areas nearest to Fall Creek Dam will likely continue to undergo rapid deposition immediately during and after a streambed drawdown event, similar to patterns observed for WY 2012–18. Some of the sediment entering these off-channel features and margin areas may be temporarily stored, then later remobilized and dispersed farther downstream. But if newly deposited sediment persists through the following spring, there is a greater likelihood that local vegetation will establish, reinforce deposited material, and trap sediment during later drawdowns. The reach-scale geomorphic changes may become more apparent if (1) streambed drawdowns continued for several decades, and geomorphic changes were measured at decadal scales or (2) the amount of sediment introduced to downstream reaches substantially increased and (or) sediment transport capacity decreased. The continued streamflow regulation of Fall Creek Dam after sediment releases provides an opportunity to strategically manage streamflows during and after the streambed drawdowns to minimize downstream sediment impacts and ensure other operational thresholds are satisfied. This study provides a comprehensive foundation of datasets and geomorphic analyses to inform dam operations at Fall Creek Lake, monitor sediment transport downstream, and consider operational schemes for future drawdowns. The datasets from this study also provide baselines of sediment transport and geomorphic conditions to assess future changes in reservoir and downstream environments. Future monitoring could be tailored to address specific questions regarding the long-term geomorphic effects of streambed drawdowns on fluvial habitats, flood hazards, cultural resources, or downstream water quality. Future monitoring activities could focus on the relevant geomorphic processes and spatial domains within the three categories used for this study: (1) reservoir erosion and net sediment evacuation, (2) sediment delivery to downstream reaches, including magnitude and temporal pattern of sediment transport, and (3) geomorphic responses of downstream reaches to sediment delivery. Specifically, high priority future monitoring activities could include: Repeat topographic or photographic surveys in the reservoir to characterize changes occurring within individual drawdowns, to quantify sediment export, to determine temporal changes in reservoir storage, and to identify locations of erosion and deposition. Continuous, year-round turbidity monitoring supplemented with suspended-sediment measurements at a streamflow-gaging station immediately downstream from the dam to quantify sediment export. Repeat geomorphic monitoring, mapping, or modeling in downstream reaches to track changes in channel and over bank features using a combination of site- and reach-scale monitoring approaches. This could support assessments of sediment deposition and ensuing vegetation encroachment on flood hazards and habitats and examine how sediment transport and depositional processes may be affected by different sediment supply, streamflow, or dam management scenarios.

Oregon

Dissolved arsenic concentrations in surface waters within the upper portions of the Klamath River Basin, Oregon and California

Arsenic toxicity is an environmental health problem. Levels of arsenic in surface waters at some locations in the Klamath River Basin in southern Oregon and northern California can exceed the U.S. Environmental Protection Agency (EPA) standard for drinking water. There are both anthropogenic and natural sources of arsenic. The Klamath River Basin consists primarily of volcanic deposits and contains an underground geothermal system with hot springs and warm water wells, all known natural sources of arsenic. Anthropogenic sources of arsenic are related to the agricultural use of herbicides, fungicides, and insecticides. Surface water arsenic levels can also be affected by fertilizer amendments, evaporative concentration, oxygen-level depletion, and various geochemical transformations that can increase arsenic mobilization. In this study by the U.S. Geological Survey and the Bureau of Reclamation, dissolved concentrations of arsenic, copper, and lead were measured in surface waters at 39 unique sites within the upper portions of the Klamath River Basin between 2018 and 2022. In every year, except 2022, sites were sampled four times between April and November. Surface-water arsenic concentrations varied up to four-orders of magnitude among sites. Median arsenic concentration was lowest at Cherry Creek (0.03 micrograms per liter [μg/L]) and highest at Wood Kimball Spring (36.7 μg/L), two sites located north of Upper Klamath Lake. The highest arsenic concentrations (17.4±4.9 μg/L, n =3) were found in drain sites (defined here as a waterbody returning used irrigation water) while the lowest arsenic concentrations were found in an artesian well (0.8 μg/L, n =1). The elevated arsenic concentrations of the drain sites suggest that arsenic might be concentrated or mobilized by agricultural activities, water re-use practices, and (or) by geochemical processes occurring around water stored in drains (that is, in the water column and across sediment water boundaries). A source of arsenic in drain water in the Klamath Strait Drain area includes water used for irrigation originating from Ady Canal. Other potential sources include groundwater, geothermal water, and local soils and sediments. Seasonal differences in surface-water arsenic concentrations were detected at 13 sites, 10 of which had higher arsenic concentrations in summer than in either spring or fall. The sites sampled around Upper Klamath Lake, the impounded rivers, one of the two canal sites, and 5 of the 14 river sites had higher surface-water arsenic concentrations in the summer than in either spring or fall. Surface-water arsenic concentrations from groundwater sources (that is, springs and in the artesian well) did not vary significantly among seasons (p-values greater than 0.1). Median surface-water concentrations of copper and lead ranged from 0.03 to 3.7 μg/L, and from 0.013 to 0.175 μg/L ( n =2–18), respectively. Dissolved concentrations of both metals were below acute toxicity endpoints reported by the EPA for freshwater animals. Surface-water arsenic concentrations varied independently from corresponding changes in surface-water lead or copper concentrations. However, arsenic concentrations measured in bed-sediment samples collected from a subset of sites located north of Upper Klamath Lake correlated strongly and significantly with the corresponding sedimentary lead concentrations ( p =0.015). Aqueous arsenic speciation measured in a subset of sites in 2019 and 2022 showed that all the arsenic existed as arsenic (V), the most oxidized arsenic species, and presumably, the least toxic. The highest proportions of arsenite (As(III)), the presumably most toxic arsenic species, relative to total arsenic concentrations were found at drain sites. Our assessment of dissolved arsenic concentrations in various surface-water bodies in the Upper Klamath River Basin reveals geographical areas of consistently low (below 2.1 μg/L), moderate (below 10 μg/L) and high (above 10 μg/L) surface-water arsenic concentrations. South of Upper Klamath Lake, surface-water arsenic concentrations were consistently higher than 20 μg/L at two drain sites located in an area of predominant agricultural land use with extensive water re-use practices. North of Upper Klamath Lake, surface-water arsenic concentrations greater than 20 μg/L were consistently measured at sites with limited nearby agricultural activities, suggesting a geogenic source. The consistently high arsenic levels from the Wood River at Jackson F. Kimball State Park, Fort Creek, and Crooked Creek, which are sites located at or near headwater spring sources, suggest a natural background source of arsenic. Water flowing downstream from this area could be a potential source of arsenic to Upper Klamath Lake and the Upper Klamath River.

California, Oregon

Probabilistic assessment of postfire debris-flow inundation in response to forecast rainfall

Communities downstream of burned steep lands face increases in debris-flow hazards due to fire effects on soil and vegetation. Rapid postfire hazard assessments have traditionally focused on quantifying spatial variations in debris-flow likelihood and volume in response to design rainstorms. However, a methodology that provides estimates of debris-flow inundation downstream of burned areas based on forecast rainfall would provide decision-makers with information that directly addresses the potential for downstream impacts. We introduce a framework that integrates a 24 h lead-time ensemble precipitation forecast with debris-flow likelihood, volume, and runout models to produce probabilistic maps of debris-flow inundation. We applied this framework to simulate debris-flow inundation associated with the 9 January 2018 debris-flow event in Montecito, California, USA. When the observed debris-flow volumes were used to drive the probabilistic forecast model, analysis of the simulated inundation probabilities demonstrates that the model is both reliable and sharp. In the fully predictive model, however, in which debris-flow likelihood and volume were computed from the atmospheric model ensemble's predictions of peak 15 min rainfall intensity, I 15 , the model generally under-forecasted the inundation area. The observed peak I 15 lies in the upper tail of the atmospheric model ensemble spread; thus a large fraction of ensemble members forecast lower I 15 than observed. Using these I 15 values as input to the inundation model resulted in lower-than-observed flow volumes which translated into under-forecasting of the inundation area. Even so, approximately 94 % of the observed inundated area was forecast to have an inundation probability greater than 1 %, demonstrating that the observed extent of inundation was generally captured within the range of outcomes predicted by the model. Sensitivity analyses indicate that debris-flow volume and two parameters associated with debris-flow mobility exert significant influence on inundation predictions, but reducing uncertainty in postfire debris-flow volume predictions will have the largest impact on reducing inundation outcome uncertainty. This study represents a first step toward a near-real-time hazard assessment product that includes probabilistic estimates of debris-flow inundation and provides guidance for future improvements to this and similar model frameworks by identifying key sources of uncertainty.

California

Quantitative mineral resource assessment of lithium pegmatite deposits in the northern Appalachian orogen, USA

Lithium demand is projected to increase more than 48 times by 2040 due to electric vehicle production and other energy storage needs. Most lithium production is outside of the USA, thereby increasing supply chain vulnerability. The combined end use importance and heightened supply risk of lithium make this lightest metallic element a critical commodity to the USA. To mitigate this supply risk, the US Geological Survey is actively assessing lithium deposits in the USA. Herein, we detail an assessment for lithium-mineralized pegmatites in the US northern Appalachian Mountains. Permissive tracts were generated by cross-referencing tectonic and geologic maps and mineral occurrence data with mappable criteria derived from generalized and region-specific lithium pegmatite ore deposit models; tracts were then ranked as having high, medium, or low permissibility. Available geophysical and geochemical data were found to be of minimal utility for this deposit type at the scale of the assessment. The number of undiscovered deposits were estimated and integrated into probabilistic simulations, which included an expanded and updated global grade and tonnage model of pegmatite-hosted lithium ore. The estimated total amount of undiscovered resources for the northern Appalachian Orogen has a median value of 1,410,000 metric tons of Li 2 O when considering moderate correlation across sub-regions. At a confidence level of 90%, a resource of at least 90,000 metric tons of Li 2 O remains undiscovered, and at a 10% confidence level, a resource of as much as 7,380,000 metric tons Li 2 O remains undiscovered. After applying an up-to-date economic filter to convert median contained lithium to recoverable material, a correlated total of 900,000 metric tons of Li 2 O may be economically extractable, equating to enough Li 2 O to provide the current annual US lithium supply deficit (presently obtained through net imports) for 127 years at 2025 rates of apparent consumption. This period of provision will inevitably shorten with projected increasing consumption rates, emphasizing that further research could be completed to better delineate regions of high lithium resource potential and support exploration and domestic production.

Connecticut, Delaware, Maine, Massachusetts, New H

U.S. Geological Survey research and assessments supporting carbon dioxide removal

Both carbon capture and storage (CCS) and carbon dioxide removal (CDR) are methods to limit future global temperature rise and ocean acidification. CCS sequesters (stores) carbon dioxide (CO2) captured from industrial sources thereby preventing the CO2 from reaching the atmosphere. The captured CO2 is injected into underground geologic reservoirs or is converted into stable industrial products. CDR enhances natural processes or uses technical approaches to remove excess CO2 from the atmosphere. Carbon dioxide is sequestered in natural sinks such as vegetation and soil, or injected into underground reservoirs or converted into durable products. The U.S. Geological Survey (USGS) conducts research and resource assessments that support biologic and geologic CDR approaches. This report will review some of the ongoing USGS CDR research and assessment efforts.

Conference Paper

Linking distribution and return-on-investment models to optimize woody management for prairie grouse in Nebraska

Grasslands in Nebraska, USA, face threats from agricultural conversion, urban development, and woody encroachment, all of which negatively affect prairie grouse ( Tympanuchus spp.) populations. To optimize conservation planning, Nebraska wildlife agencies developed probabilistic area-based surveys for greater prairie-chicken ( T. cupido ) and sharp-tailed grouse ( T. phasianellus ) to sample landscapes across a range of environmental conditions. This design improves historical surveys and enables the development of distribution models that quantitatively define habitat associations and support scenario-based conservation planning. Using survey data collected during 2020–2022, we modeled prairie grouse occurrence and abundance as functions of land cover, topography, and climate using Bayesian logistic and zero-inflated negative binomial models with regularized horseshoe priors. We then conducted a maximum potential return-on-investment analysis of woody cover treatments, assuming sustained treatment success, relative to projected impacts of woody encroachment on prairie grouse populations by 2050. Among modeled associations were a positive association with grasslands having low woody cover and a negative association with grasslands having high woody cover. Across the 3-year period, median estimated annual populations were 142,380 for greater prairie-chicken (range of 95% CIs across years = 68,821–277,615) and 64,154 for sharp-tailed grouse (range of 95% CIs across years = 27,550–146,559). Under projected woody encroachment, mean predicted population declines were 10% for greater prairie-chicken (range of 95% CIs = 7–14%) and 6% for sharp-tailed grouse (range of 95% CIs = 5–7%). Areas with high prairie grouse density and low treatment costs in 2021, and high projected woody encroachment and population loss by 2050, offered the greatest return on investment for woody management. Return on investment was greatest in the northwestern Shortgrass Prairie ecoregion (northwestern Nebraska) for sharp-tailed grouse and the eastern Sandhills ecoregion (central Nebraska) for both species. These models underscore the value of evidence-based, quantitative approaches for prioritizing conservation actions on working lands. Scenario-based modeling could be extended to guide other treatments, such as optimizing restoration (e.g., Conservation Reserve Program) or incentivizing grassland persistence in areas with predicted climate resilience.

Nebraska

Constraining landslide frequency across the United States to inform county-level risk reduction

Informative landslide hazard estimates are needed to support landslide mitigation strategies to reduce landslide risk across the United States. Whereas existing national-scale landslide susceptibility products assess where landslides are likely to occur, they do not address how often , which is a critical element of landslide hazard and risk assessments. In particular, the U.S. Federal Emergency Management Agency's National Risk Index (NRI) requires landslide frequency estimates to inform expected annual loss estimates. We present county-level landslide frequency (landslides per area per year) estimates for the 50 US states. We applied Bayesian negative binomial regression to estimate both the expected (average) reported landslide frequency and full distribution of annual landslide counts for each county. We compared a suite of models that used combinations of landslide-susceptible area, probability of potentially triggering earthquakes, frequency of potentially triggering precipitation, and ecological region as predictors. We trained our models with landslide inventory data from counties with the most comprehensive records available nationwide and used zero-inflated negative binomial distributions as an incompleteness model to correct for temporal reporting gaps. We selected a preferred frequency model to inform the NRI based on information criteria and physically plausible parameter estimates. The model showed that average annual reported landslide frequencies vary by 5 orders of magnitude across US counties, ranging from 0.002 (0.00015–0.05) landslides 1000 km −2 yr −1 in Kusilvak Census Area, Alaska, to 29 (19–46) landslides 1000 km −2 yr −1 in Lake County, California, reflecting the country's strong variations in landslide susceptibility, earthquake probability, and other factors for which ecological region serves as a proxy. Counties with estimated frequencies in the top 20 % of all counties are predominately along the West Coast of the continental United States, in mountainous regions of the Pacific Northwest and Intermountain West, in locally steep or earthquake-prone regions of the Midwest and Southeast, along the Appalachians, in southern and southeastern Alaska, and on some Hawaiian islands. By examining the number of landslides predicted in 99th percentile years for each county, we identified that 26 % of US counties likely have potential for widespread landsliding with more than 10 landslides 1000 km −2 yr −1 , even when such large events have not been reported in the training data for that county. Overall, our results better represent the range of possible landslide frequencies and spatial variations than previous national-scale estimates reported in the NRI, and our approach can inform other risk-reduction and loss-mitigation efforts across the United States and globally.

Natural Hazards and Earth System Sciences

U.S. Geological Survey—Department of the Interior, Region 11, Alaska—2023–24 biennial science report

Introduction U.S. Geological Survey (USGS) Mission—The USGS national mission is to monitor, analyze, and predict the current and evolving dynamics of complex human and natural Earth-system interactions and to deliver actionable information at scales and timeframes relevant to decision makers. Consistent with the national mission, the USGS in Alaska provides timely and objective scientific information to help address issues and inform management decisions across five interconnected focus areas: Energy and Minerals; Geospatial Mapping; Natural Hazards; Water Quality, Streamflow, and Ice Dynamics; and Ecosystems. The USGS in Alaska consists of approximately 350 scientists and support staff working in 3 Alaska-based science centers. USGS science activities are also initiated by the Cooperative Research Unit and USGS centers outside Alaska. In the last 5 years, USGS research in Alaska has produced many scientific benefits resulting from more than 900 publications. Publications relevant to Alaska can be conveniently searched by keyword through the USGS Publications Warehouse at https://pubs.usgs.gov/.

Alaska

Chemostratigraphy of the Cretaceous Hue Shale in Arctic Alaska: Exploring paleoceanographic controls on trace element enrichment, organic matter accumulation, and source-rock evolution

We document chemostratigraphy in an outcrop of late Albian to early Campanian (∼103–82 Ma) marine source rocks to better understand paleoenvironmental controls on trace element (TE) enrichment and organic matter accumulation in the distal Colville foreland basin of Arctic Alaska and how those drivers are linked to arc volcanism and successions of Cretaceous oceanographic and climatic biogeochemical events. This unique, 113-m-thick section of Cretaceous Hue Shale deposited during a series of previously undocumented Arctic Cretaceous oceanic anoxic events (Lease et al., 2024) is the only known exposure of thermally immature (0.48–0.52% R o , random vitrinite reflectance) Hue Shale in Arctic Alaska. Strata comprise mainly clay-rich mudstone with elevated total organic carbon (TOC) and hydrogen index values reaching 26.3 wt% (mean = 7.5 wt%) and 689 mg hydrocarbon (HC)/g TOC (mean = 385 mg HC/g TOC), respectively. Maceral composition consists predominantly of fluorescent amorphous organic matter, with abundant brightly fluorescent alginite, including Tasmanites , acritarchs, and Leiosphaeridia . Discrete layers of volcanic ash (preserved as bentonite) are present throughout the section and provide quantitative age control based on U–Pb dates. Chemostratigraphic trends are investigated to advance our understanding of local oceanographic conditions and controls on stratigraphic and temporal heterogeneity of Brookian source rocks. Concurrent sedimentary enrichment in Mo, U, V, Pb, and Cu across the Albian–Cenomanian boundary of the exposed basal gamma-ray zone, may reflect anoxic to euxinic benthic redox conditions favoring organic matter accumulation and preservation. Fluctuating degrees of anoxia-euxinia are inferred throughout the overlying Hue Shale succession, reflected by varying patterns of TE enrichment and TE–TOC covariation. Elevated C org /P molar ratios (>250) across most of the section, with several values exceeding 690, signify that enhanced biological productivity is sustained throughout deposition. Enhanced productivity, recorded by both C org /P and excess Ba, also parallels increases in source rock richness (elevated TOC and S 2 values) during the late Albian–early Cenomanian and late Cenomanian – Turonian. Enhanced productivity and variations in oceanic circulation/stratification likely both drove changes in benthic redox conditions that favored organic carbon accumulation and preservation. Increased continental arc volcanism (e.g., Okhotsk–Chukotka volcanic belt) and High Arctic Large Igneous Province magmatic eruptions throughout the Cretaceous, inferred to have influenced nutrient cycling and local aqueous nutrient availability, also have been invoked as potential drivers of organic carbon burial and source-rock development across the sedimentary sequence. Results presented here document the organic-rich and oil-prone source-rock quality of the Hue Shale in the distal part of the Colville foreland basin and bolster the potential for a Cretaceous petroleum system beneath the eastern North Slope.

Alaska

Determining Volcanic Risk in Auckland (DEVORA) Research Programme—A transdisciplinary approach to address the challenge of distributed volcanism in an urban environment

The Determining Volcanic Risk in Auckland (DEVORA) Research Programme was launched in 2008 to address the challenges associated with monogenetic volcanism in an urban setting and to enhance volcanic risk management in Tāmaki Makaurau Auckland in Aotearoa New Zealand. It is a multi-agency, increasingly transdisciplinary (defined here as research that transcends traditional disciplinary boundaries by integrating diverse types of knowledge, perspectives, and methods from academic and non-academic participants to create novel solutions to complex problems), and collaborative research program jointly led by Waipapa Taumata Rau University of Auckland and Earth Sciences New Zealand (ESNZ; formerly GNS Science), with core funding from Natural Hazards Commission Toka Tū Ake (NHC; formerly the Earthquake Commission, EQC) and Te Kaunihera o Tāmaki Makaurau Auckland Council (AC). The primary research focus of DEVORA is to investigate the geologic history, volcanic hazards, and risk posed by the basaltic intraplate Auckland Volcanic Field. Disruption from ash fall and gas from other Aotearoa New Zealand volcanoes is also considered. DEVORA’s work to explore exposure and vulnerability in Tāmaki Makaurau Auckland is also useful for assessing risks from other non-volcanic natural hazards, such as seismic and tsunami hazards. The greater Tāmaki Makaurau Auckland region has an ethnically and socio-economically diverse population of approximately 1.7 million, representing about one-third of the Aotearoa New Zealand population, and hosts critical infrastructure of national significance. The size and nature of the populace, consequential economic base, and important infrastructure within Tāmaki Makaurau Auckland mean that the effects of a volcanic eruption would be felt nationally, including through the disruption of air travel to Aotearoa New Zealand. The hazards from such an eruption could potentially affect hundreds of thousands of people, businesses, and lifelines (critical infrastructure). A considerable challenge for emergency and risk managers is the monogenetic nature of the volcanic field. It is not known where or when the next eruption will occur, how much warning we may get before an eruption, nor how an eruption and its effects might unfold. In this contribution, we highlight the concept and collaborative intent of the DEVORA Programme and show how it has evolved over the 16 years since its inception. We describe how DEVORA has unified more than 100 researchers (including more than 50 graduate students) and numerous stakeholders to address key issues facing Tāmaki Makaurau Auckland and describe how research findings are being implemented into policy and communicated to stakeholder agencies and the public. We also illustrate the broader influence of the DEVORA Programme and provide some learnings that might benefit others embarking on similar integrated projects, especially those focused on distributed volcanism in and near populated areas.

Auckland

Refining the earthquake history of south-central Alaska through lake records

The Alaska–Aleutian subduction zone (AASZ) is one of the world's most seismically active plate boundaries and the source of the 1964 M w 9.2 Great Alaska earthquake–the second largest instrumentally recorded earthquake in the world. Understanding the nature and frequency of such earthquakes is necessary for seismic and tsunami hazard assessment, but instrumental and historical records that span less than 150 years are too short to allow a statistically reliable analysis of earthquake recurrence times. This calls for studies of evidence of past earthquakes, extending the earthquake catalog further back in time. Subduction-zone paleoseismology in south-central Alaska is predominantly based on coastal evidence of land-level changes and tsunamis generated by megathrust earthquakes and preserved in the geological record. A complementary approach is lacustrine paleoseismology, which is still a relatively young discipline in Alaska. However, globally, lake basins are well-established high-resolution and continuous recorders of paleoseismic activity along subduction zones, relying on the identification of underwater landslide deposits and turbidites generated by seismic shaking. As a result, lake basins not only register ground shaking from megathrust earthquakes, but also from intraslab and crustal earthquakes, which are typically not accompanied by significant land-level changes. In this review paper, we combine coastal and lacustrine paleoseismology approaches to refine the south-central Alaskan earthquake history by comparing the paleoseismic records from two lakes (i.e., Eklutna Lake, located in the Chugach Mountain Range, and Skilak Lake, situated on the Kenai Peninsula) with the coastal and crustal earthquake catalog in Alaska. The resulting age ranges of all known megathrust earthquakes involving the Alaskan megathrust between the Kodiak and Prince William Sound (PWS) sections are more precise and accurate for the last 1.3 kyrs BP than the previously published age ranges from coastal records. As a result, this study supports the following key conclusions: (1) The 1964 CE earthquake was an exceptionally strong and unique event in the last 2000 years, rupturing the PWS, Kenai, Barren Islands, and Kodiak sections simultaneously. (2) The high-resolution and seasonal markings of the varved lake records now disentangle for the first time closely timed earthquakes, which was not possible based on the coastal evidence alone. (3) No persistent megathrust rupture boundaries exist. So, the possibility of a full rupture of the entire eastern AASZ, from PWS to Semidi cannot be excluded. (4) The rupture pattern in the eastern AASZ reveals superimposed cycles of multi-asperity ruptures (1964 earthquake) and clustered complementary partial ruptures, or rupture cascades. (5) The PWS section hosts the largest asperity in the eastern AASZ. (6) The shaking record of megathrust earthquakes indicates a time-dependent (quasiperiodic) behavior for the study area, but the observation of complementary clusters means that the hazards will not drop to zero but instead may even increase for a neighboring section. (7) The time-independent behavior of intraplate earthquakes implies that the intraslab hazard did not decrease following the 2016 and 2018 earthquakes. This study utilizes an integrated approach for subduction zone paleoseismology as a solution for unraveling recurrence and rupture patterns in Alaska, which can be applied worldwide.

Alaska

Engineering and risk research—A strategic vision for extending USGS earthquake science to risk assessment and mitigation

As a part of the U.S. Geological Survey (USGS) Natural Hazards Mission Area, the Engineering and Risk Project (ERP) of the Geologic Hazards Science Center conducts civil engineering research to extend natural hazards science to risk assessments. The ERP includes predominantly, but not exclusively, staff funded by the USGS Earthquake Hazards Program. A major focus of the ERP is to deliver actionable information to decisionmakers that helps promote the safety, security, and economic well-being of the Nation. The report discusses briefly the ERP’s evolution and scope, its organization structure, describes key products and deliverables, their efforts to engage with external partners, and its strategy and vision in conducting range of engineering and risk research. The research topics outlined in this report, as developed by the ERP, may be used to facilitate project planning activities during the next 10 years and serve as a longer-term planning resource for the USGS Earthquake Hazards Program and Geologic Hazards Science Center.

Circular