Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Journal of North American Bat Research”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 15Linked to original sources
USGS2025

Evaluation of solid bitumen created from marine oil shale bituminite under hydrous and anhydrous pyrolysis conditions

To test the influence of environmental conditions on aromaticity of solid bitumen generated during petroleum generation, four organic-rich (26–36 wt% total organic carbon) oil shale samples collected from the Neoproterozoic–Lower Cambrian restricted marine Salt Range Formation in the upper Indus Basin, Pakistan, were pyrolyzed under hydrous and anhydrous conditions. Experiments used closed system batch reactors at subcritical water temperatures between 300 and 370°C for 72 h. Thermal conversion of bituminite in the Salt Range oil shales created a newly formed solid bitumen, similar to previous observations from experiments on the Eocene lacustrine Green River Formation Mahogany zone oil shale. Newly formed solid bitumen in the Salt Range Formation oil shales generally has higher reflectance (R o ) in hydrous residues compared to anhydrous experiments subjected to the same time-temperature conditions, also similar to prior observations. This finding supports the hypothesis that radical disproportionation is favored in the presence of hydrogen contributed by water, promoting aromatization in the solid bitumen residue with concomitant increased expulsion of saturated hydrocarbons. Indigenous solid bitumen (and vitrinite in a comparison sample) also shows higher reflectance values in hydrous versus anhydrous residues, indicating that additional aromatization in the presence of exogenous hydrogen occurs both in newly formed organic matter and in organic matter that is present throughout the experiment. Despite similarities in their bulk rock geochemical screening parameters, R o evolution shows different trajectories amongst the four Salt Range oil shales, suggesting as-yet undetermined differences in kinetic properties which are probably related to differences in a priori chemical composition. These results have implications for the use of solid bitumen reflectance (BR o ) as a thermal proxy, suggesting BR o values and appearance could vary as a function of the concentration of water. Variation in water concentration may be present at the reservoir or formation scale, but may also be present at a much finer scale in tight oil shales where permeability is several orders of magnitude lower than conventional reservoirs. Therefore, local variations in the presence of water potentially could explain substantial variation in BR o values and appearance in closely spaced source rock samples and even within an individual microscope field.

Journal of Analytical and Applied Pyrolysis↗
USGS2024

Hydrologic investigations and a preliminary conceptual model of the groundwater system at North Penn Area 1 Superfund Site, Souderton, Montgomery County, Pennsylvania

The U.S. Geological Survey (USGS) conducted hydrogeologic investigations, reviewed existing data, and developed a preliminary conceptual model of the groundwater system as part of technical support of the U.S. Environmental Protection Agency (EPA) at the North Penn Area 1 Superfund Site (hereafter, the NP1 Site) located within the Borough of Souderton in Montgomery County, Pennsylvania. Field work and monitoring took place during 2012–18. The area is underlain by sedimentary formations that form a fractured-rock aquifer used for drinking water and industrial supply. The EPA placed the Site on the National Priorities List in 1989, identifying tetrachloroethylene (PCE) and trichloroethylene (TCE) as contaminants of concern. During 2012–18, the USGS conducted field activities that included drilling an 82-foot (ft)-deep monitoring well (MG 2220) in 2016, reconstructing a 208-ft-deep former industrial production well (MG 668 [Granite Knitting Mill]), and collecting borehole geophysical and video logs and water levels from those and five additional wells, which ranged in depth from about 50 to 200 ft below land surface. Continuous water levels were collected during 2014–17, and a synoptic set of water levels were measured in April 2018 in the seven wells. The borehole geophysical logs (caliper, acoustic televiewer, natural gamma, single-point resistance, vertical flow, and fluid temperature and resistivity) and borehole video logs in the seven wells were evaluated to assess potential for lithologic correlation and to identify and describe water-bearing features, which included both low- and high-angle fractures and other openings oriented along dipping bedding planes, joints, or possible faults. Borehole geophysical logs collected by USGS in 1992 in a 300-ft-deep former production well near the Site were also evaluated. Few to no distinctive features were identified on geophysical logs (natural gamma and single-point resistance) that could be used for correlation, thus limiting this approach to determining local geologic structure. Extensive fracturing in the upper 62 ft of monitoring well MG 2220 indicates that the well was likely drilled through a zone of faulting, and other evidence of faulting is present in the area near the Site. Assessment of continuous water levels showed hydraulic connections among some wells as indicated by rising or falling water levels in response to changes in pumping rates at nearby wells. A map of water levels measured in April 2018 indicates potential for groundwater flow generally toward the stream to the south and southwest of the Site, but the limited water-level data are insufficient to describe vertical groundwater gradients or lateral gradients in any detail. Review of 1999–2022 volatile organic compound (VOC) monitoring data collected by the Pennsylvania Department of Environmental Protection for five monitoring wells indicates that the highest groundwater concentrations of PCE and TCE were found in samples from extraction well MG 2201 (S-1) downgradient from, and nearest to, the previously identified Site contaminant source area, and these concentrations fluctuated through time. PCE concentrations were higher than TCE concentrations in samples from all five monitoring wells and were much higher than TCE concentrations in samples from extraction well MG 2201 (S-1). Temporally variable recharge is a possible factor affecting observed fluctuations in PCE concentrations in groundwater samples from well extraction MG 2201 (S-1), as indicated by a general inverse relation between PCE concentrations and water levels in a nearby long-term observation well. The PCE concentration of 1,830 micrograms per liter (μg/L) in a May 2018 water sample from monitoring well MG 2220 was more than four times the PCE concentration of 444 μg/L in a December 2017 sample from the nearby extraction well MG 2201 (S-1), which is open to fewer fractures. Low concentrations of VOCs were measured in surface water at two stream sites downgradient from wells with the highest groundwater VOC concentrations at the Site, indicating that discharge of contaminated groundwater to the stream is likely. Development of a conceptual model of the groundwater system was constrained by limited data. In areas with no pumping, groundwater-flow directions generally are thought to be controlled by topography and geologic structure (bedding orientation) and likely to the south and southwest of the Site, with local flow directions affected by orientations of fractures, joints, and local faults. Additional investigations that could help improve the conceptual model of the groundwater system and help delineate the extent of groundwater contamination and its transport are discussed.

Pennsylvania↗
USGS2026

Evolution of arsenic speciation during thermal treatment simulating wildfire heating in arsenic-rich sediments

Understanding arsenic transformations during wildfires can help better constrain the environmental impacts of increased wildfire intensity, frequency, and burned area. Previous studies have monitored the evolution of metal(loid) speciation at specific time/temperature endpoints, hampering the comprehension of the dynamic transformations of metal(loid)s during wildfires. Here, a novel approach, namely in situ time-resolved X-ray absorption near edge structure (TR-XANES) spectroscopy, was used for the first time to monitor the heat-induced redox transformations of arsenic (As) in two As-rich sediments with different characteristics. No arsenic transformations were observed in either sediment at room temperature or when the sediments were heated to a maximum temperature of 400 ºC. When heated to a maximum temperature of 600 or 700 ºC, As underwent complex, dynamic, and partially reversible redox transformations, the extent of which varied with sediment properties, initial As speciation, and heating temperature and duration. In the case of sediments initially containing As(V) and a low sulfide/sulfate ratio, the As(V) was reduced to As(III) over a short period of time, followed by immediate reoxidation of As(III) to As(V). The extent of the transient As reduction increased with increasing maximum temperature. The final As speciation at the end of the heating experiment was not substantially different from that at the beginning of the experiment. In contrast, in sediments that were best described by a more complex combination of reference compounds (As(V) coprecipitated with or adsorbed on iron oxide, arseniosiderite, arsenopyrite) with a high sulfide/sulfate ratio, As(V) phases were reduced to As(III) and As(III) was further reduced to As(-I) (at 700 ºC, only), followed by delayed reoxidation of As(-I) to As(III) (at 700 ºC, only) and reoxidation of As(III) to As(V). Approximately 9% and 26% of all As remained as As(III) ( i.e., was not reoxidized to As(V)) at the end of the experiment when heated to a maximum temperature of 600 and 700 ºC, respectively, which is higher than the relative abundance of As(III) in the native sediment. These fire-induced As transformations can potentially enhance As mobilization to surface water and groundwater, posing risks to environmental and human health.

California↗
USGS2025

Confocal laser-scanning microscopy (CLSM)-based thermal maturity of Tasmanites and progress in standardization of fluorescence microspectrometry

Evaluation of thermal maturity in vitrinite-free or vitrinite-deficient sediments via fluorescence microspectrometry can provide relevant information related to petroleum exploration and thermal history assessment. However, variation in spectral fluorescence properties of alginite macerals with increasing thermal maturity is largely underexplored. Here, authors of this study have applied confocal laser-scanning microscopy (CLSM) in conjunction with fluorescence microspectrometry to a maturity series of marine Upper Devonian Tasmanites algae from the Ohio Shale (Huron Member) and a single sample from the Marcellus Formation of the Appalachian Basin. Spectral fluorescence properties of Tasmanites were evaluated in relation to orientation, measurement location, and the number of measurements per sample, and were compared to published literature. Emission spectra of Tasmanites from continuous wave laser excitation (405 nm) were acquired from sections perpendicular and parallel to bedding and at different positions within individual Tasmanites bodies. The results showed a progressive red-shift in emission maxima (λ max ) in a large sample sized maturity series ( N = 19), e.g., 493 to 578 nm for the perpendicular section at middle position. Further, blue-shifted apex and mineral-adjacent positions within sections perpendicular to bedding were observed, with the latter being reported here for the first time. While blue-shift at apex positions can be attributed to mechanical deformation-induced reorientation of photoselected fluorophores, the blue-shifted mineral-adjacent positions could result from strain loading and development of a plastic deformation region at the mineral contact zone with Tasmanites . A decrease in standard deviation with increasing number of measured emission maxima is well-observed, and 15 to 20 individual measurements per sample appears sufficient for low standard deviation and coefficient of variance. CLSM-derived thermal maturity parameters indicated that a moderate positive correlation of red/green quotient (Q 650/500 ; R 2 = 0.67) with solid bitumen reflectance (BR o in %) exists. For reproducible results, the determination of λ max and Q 650/500 should be conducted exclusively in the middle position at perpendicular and parallel sections of the polished whole-rock pellets, where the lowest standard deviation in measurement was observed. These results strengthen the suitability and relevance of the CLSM technique in thermal maturity studies of dispersed organic matter (DOM) and contribute to the standardization of fluorescence microspectrometry methods in organic petrology investigation.

Kentucky, Ohio, Virginia, West Virginia↗
USGS2024

Will there be water? Climate change, housing needs, and future water demand in California

Climate change in California is expected to alter future water availability, impacting water supplies needed to support future housing growth and agriculture demand. In groundwater-dependent regions like California's Central Coast, new land-use related water demand and decreasing recharge is already stressing depleted groundwater basins. We developed a spatially explicit state-and-transition simulation model that integrates climate, land-use change, water demand, and groundwater gain-loss to examine the impact of future climate and land use change on groundwater balance and water demand in five counties along the Central Coast from 2010 to 2060. The model incorporated downscaled groundwater recharge projections based on a Warm/Wet and a Hot/Dry climate future from a spatially explicit hydrological process-based model. Two urbanization projections from a parcel-based, regional urban growth model representing 1) recent historical and 2) state-mandated housing growth projections were used as alternative spatial targets for future urban growth. Agricultural projections were based on recent historical trends from remote sensing data. Annual projected changes in groundwater balance were calculated as the difference between land-use related water demand, based on historical estimates, and climate-driven recharge plus agriculture return flows. Results indicate that future changes in climate-driven groundwater recharge, coupled with cumulative increases in agricultural water demand, result in overall declines in future groundwater balance, with a Hot/Dry future resulting in cumulative groundwater decline in all but Santa Cruz County. Cumulative declines by 2060 are especially prominent in San Luis Obispo (−2.9 to −5.1 Bm 3 ) and Monterey counties (−6.5 to −8.7 Bm 3 ), despite limited changes in agricultural water demand over the model period. These two counties show declining groundwater reserves in a Warm/Wet future as well, while San Benito and Santa Barbara County barely reach equilibrium. These results suggest future groundwater supplies may not be able to keep pace with regional demand and declining climate-driven recharge, resulting in a potential reduction in water security in the region. However, our county-scale projections showed new housing and associated water demand does not conflict with California's groundwater sustainability goals. Rather, future climate coupled with increasing agricultural groundwater demand may reduce water security in some counties, potentially limiting available groundwater supplies for new housing.

California↗
USGS2025

A joint Gaussian process model of geochemistry, geophysics, and temperature for groundwater TDS in the San Ardo Oil Field, California, USA

Decline in availability of fresh groundwater has expanded interest in brackish groundwater resources; however, the distribution of brackish groundwater is poorly understood. Water resources in sedimentary basins across the United States often overlie oil and gas development. Mapping of groundwater total dissolved solids (TDS) using data from oil well geophysical logs has become an important technique for identifying fresh and brackish groundwater. Existing geophysical log analysis methods use porosity and temperature to relate formation resistivity to TDS. Typically, natural geothermal gradients are used to estimate temperature at the location of collected resistivity. However, in thermally enhanced oil fields, steam is injected into the subsurface to mobilize high viscosity oil, creating variable temperature distributions. Furthermore, TDS derived from resistivity also depends on the fractions of dominant ions. Typically, chloride and bicarbonate fractions must be determined. It is also necessary to model TDS across many geologic units with heterogenous porosity distributions. Collectively, each quantity used to estimate TDS (resistivity, porosity, temperature, bicarbonate fraction) varies in space and time, and available data points are rarely collocated. Here, we present a new method of mapping groundwater TDS that continuously models each quantity together with a joint Gaussian process. This method enables mapping fresh and brackish water with practically available data. We apply this method to the San Ardo Oil Field in Monterey County, California, where steam injection occurs. In some areas of the aquifer system overlying the oil zone, the temperature is ∼75 °C, roughly twice the natural background value. Groundwater TDS is typically <1,500 mg/L in the aquifer and increases with depth to ∼9,000 mg/L in the oil-producing zone. A low-permeability clay layer delineates the fresh and brackish water, likely by inhibiting surface recharge from penetrating the deeper zones, allowing higher-TDS connate water to remain in place. Weaker lateral TDS trends may be controlled by recharge patterns associated with the Salinas River. Our model reveals with high certainty that groundwater has freshened in one localized part of the oil-producing zone and suggests with less certainty that more widespread freshening has also occurred. The lowering of TDS was possibly from decades of low-TDS steam injection and the associated fluid production and disposal operations.

California↗
USGS2024

The projected exposure and response of a natural barrier island system to climate-driven coastal hazards

Accelerating sea level rise (SLR) and changing storm patterns will increasingly expose barrier islands to coastal hazards, including flooding, erosion, and rising groundwater tables. We assess the exposure of Cape Lookout National Seashore, a barrier island system in North Carolina (USA), to projected SLR and storm hazards over the twenty-first century. We estimate that with 0.5 m of SLR, 47% of current subaerial barrier island area would be flooded daily, and the 1-year return period storm would flood 74%. For 20-year return period storms, over 85% is projected to be flooded for any SLR. The modelled groundwater table is already shallow (< 2 m deep), and while projected to shoal to the land surface with SLR, marine flooding is projected to overtake areas with emergent groundwater. Projected shoreline retreat reaches an average of 178 m with 1 m of SLR and no interventions, which is over 60% of the current island width at narrower locations. Compounding these hazards is subsidence, with one-third of the study area currently lowering at > 2 mm/yr. Our results demonstrate the difficulty of managing natural barrier systems such as those managed by federal park systems tasked with maintaining natural ecosystems and protecting cultural resources.

North Carolina↗
USGS2026

Assessing the state of hydrologic science in the Upper Klamath Basin—A comprehensive review of data, tools, and models

Water demand in the Upper Klamath Basin (UKB) from various stakeholders and ecological needs often outstrips available supply, leading to persistent management challenges. This study reviews the state of hydrologic science within the UKB as of 2025—specifically, the tools, data, and models available for assessing five key components of the water system: (1) surface water; (2) precipitation; (3) evapotranspiration; (4) groundwater; and (5) water use. The UKB water supply is critical for Native American communities, regional agriculture, and federally listed fishes and faces challenges from competing needs, climate variability, and operational/regulatory requirements. We assess existing datasets, regional and national models, and historical studies to understand the available resources and identify gaps that may hinder integrated water assessments and management. Our findings indicate areas where improvements in data collection and model precision could improve the accuracy of water-availability forecasts and support water-management practices. This review can inform near-term forecasting, assist in optimizing water-resource data collection and management strategies, and support regional water-availability assessments of the basin.

Oregon↗
USGS1996

Hydrogeologic investigation and simulation of ground-water flow in the Upper Floridan Aquifer of north-central Florida and southwestern Georgia and delineation of contributing areas for selected city of Tallahassee, Florida, water-supply wells

A 4-year investigation of the Upper Floridan aquifer and ground-water flow system in Leon County, Florida, and surrounding counties of north-central Florida and southwestern Georgia began in 1990. The purpose of the investigation was to describe the ground-water flow system and to delineate the contributing areas to selected City of Tallahassee, Florida, water-supply wells. The investigation was prompted by the detection of low levels of tetrachloroethylene in ground-water samples collected from several of the city's water-supply wells. Hydrologic data and previous studies indicate that; ground-water flow within the Upper Floridan aquifer can be considered steady-state; the Upper Floridan aquifer is a single water-bearing unit; recharge is from precipitation; and that discharge occurs as spring flow, leakage to rivers, leakage to the Gulf of Mexico, and pumpage. Measured transmissivities of the aquifer ranged from 1,300 ft 2 /d (feet squared per day) to 1,300,000 ft2/d. Steady-state ground-water flow in the Upper Floridan aquifer was simulated using a three-dimensional ground- water flow model. Transmissivities ranging from less than 5,000 ft2/d to greater than 11,000,000 ft 2 /d were required to calibrate to observed conditions. Recharge rates used in the model ranged from 18.0 inches per year in areas where the aquifer was unconfined to less than 2 inches per year in broad areas where the aquifer was confined. Contributing areas to five Tallahassee water-supply wells were simulated by particle- tracking techniques. Particles were seeded in model cells containing pumping wells then tracked backwards in time toward recharge areas. The contributing area for each well was simulated twice, once assuming a porosity of 25 percent and once assuming a porosity of 5 percent. A porosity of 25 percent is considered a reasonable average value for the Upper Floridan aquifer; the 5 percent porosity simulated the movement of ground-water through only solution-enhanced bedding plains and fractures. The contributing areas were generally elliptical in shape, reflecting the influence of the sloping potentiometric surface. The contributing areas delineated for a 5 percent porosity were always much larger than those determined using a 25 percent porosity. The lowest average ground-water velocity computed within a contributing area, using a 25 percent porosity, was 1.0 ft/d (foot per day) and the highest velocity was 1.6 ft/d. The lowest average ground-water velocity, determined using a 5 percent porosity, was 2.4 ft/d and the highest was 7.4 ft/d. The contributing areas for each of the five wells was also determined analytically and compared to the model-derived areas. The upgradient width of the simulated contributing areas were larger than the upgradient width of the analytically determined contributing areas for four of the five wells. The model could more accurately delineate contributing areas because of the ability to simulate wells as partially penetrating and by incorporating complex, three-dimensional aquifer characteristics, which the analytical method could not.

Florida, Georgia↗
USGS2025

Landslide-channel feedbacks amplify channel widening during floods

Channel widening is a major hazard during floods, particularly in confined mountainous catchments. However, channel widening during floods is not well understood and not always explained by hydraulic variables alone. Floods in mountainous regions often coincide with landslides triggered by heavy rainfall, yet landslide-channel interactions during a flood event are not well known or documented. Here we demonstrate with an example from the Great Colorado Flood in 2013, a 1000 year precipitation event, how landslide-channel feedbacks can substantially amplify channel widening and flood risk. We use a combination of DEM differencing, field analysis, and multiphase flow modeling to document landslide-channel interaction during the flood event in which sediment delivered by landslides temporarily dammed the channel before failing and generating substantial channel widening. We propose that such landslide-flood interactions will become increasingly important to account for in flood hazard assessment as flooding and landsliding both increase with extreme rainfall under climate change.

Colorado↗
USGS2025

Reaction kinetics and accelerant effects of sulfides in early mature hydrocarbon generation using hydrous pyrolysis

Hydrocarbon generation in organic-rich sediments is influenced by the molecular organic composition and relative abundance of associated minerals. Certain mineral-derived elements act as catalysts and reaction intermediaries, facilitating early-stage hydrocarbon formation in potential source rocks. This study investigated the role of sulfur contributed from pyrite as an accelerant in thermal reaction, focusing on its effects on early maturation and consequent hydrocarbon generation from gilsonite (low-sulfur solid petroleum). Hydrous pyrolysis (HP) experiments were conducted on mixtures of gilsonite and pyrite in varying ratios (1:0.1, 1:0.5, 1:1, 1:2, and 1:10 w/w gilsonite:pyrite) at 320, 350, and 370 °C for 72 h. Untreated and thermally altered residues were analyzed using solid bitumen reflectance (BR o , %), total organic carbon (TOC) content, programmed temperature pyrolysis, scanning electron microscopy with energy-dispersive spectroscopy (SEM-EDS), and X-ray diffraction (XRD) to evaluate the potential accelerant role of pyritic sulfur in hydrocarbon formation. The results show HP residues at 320 and 350 °C with greater pyrite concentrations had higher BR o , while reflectance values were similar in the 370 °C residues, regardless of pyrite concentration, suggesting enhanced reaction at lower thermal conditions. Increasing pyrite content systematically decreased hydrogen index (HI) values while increasing the transformation ratio (TR) and production index (PI), indicating enhanced conversion of organic matter to hydrocarbons with increasing pyrite concentrations. Gas yields increased with pyrite addition, particularly at 350 °C, confirming secondary cracking effects. However, gas production stabilized or declined at higher pyrite loadings (1:10), suggesting alternative reaction pathways such as coke formation. Our data indicate the presence of pyrite lowers the activation energy for thermal cracking, shifting peak experimental hydrocarbon generation temperatures downward by 20–30 °C, with the most pronounced accelerant effects observed at moderate pyrite concentrations (1:0.5 and 1:1). The thermodynamic framework reveals that pyrite stability is influenced by experimental conditions, with pyrrhotite formation favored in the presence of gilsonite due to reduced oxygen fugacity. Pyrite transformation to pyrrhotite, as observed through XRD, SEM-EDS, and predicted by thermodynamic data, further supports the accelerant role of S, as pyrrhotite exhibits a higher hydrogen transfer potential, promoting early oil generation. These findings highlight the importance of pyrite in modulating hydrocarbon generation pathways in organic-rich systems.

Journal of Analytical and Applied Pyrolysis↗
USGS2025

Widespread occurrence of former anhydrite phenocrysts in Laramide-age magmas related to porphyry-skarn Cu mineralization at Santa Rita and Hanover-Fierro, New Mexico, USA

Reports of magmatic anhydrite are relatively rare, with only ~30 occurrences documented worldwide so far. However, magmatic anhydrite saturation is difficult to recognize because anhydrite decomposes rapidly in near-surface environments. In most cases, only anhydrite inclusions shielded within other phenocryst phases were able to survive. Alternatively, since anhydrite phenocrysts preserved in fresh volcanic rocks are characteristically intergrown with apatite phenocrysts, the former presence of anhydrite phenocrysts can be recognized based on the occurrence of lath-shaped cavities that show a strong spatial association with apatite phenocrysts. These cavities can be either empty or filled with low-temperature, secondary minerals such as zeolites, carbonates, or microcrystalline silica. A systematic search for the occurrence of such cavities, combined with optical and Raman-spectroscopic identification of anhydrite inclusions preserved within apatite, hornblende and quartz phenocrysts, demonstrates that most of the Laramide-age magmas associated with the Santa Rita and Hanover-Fierro porphyry-skarn Cu (Zn, Mo, Au, Pb) deposits were saturated in magmatic anhydrite. The anhydrite typically coexisted with monosulfide solid solution (MSS), suggesting oxygen fugacities of ~2.0±0.5 log units above the fayalite-magnetite-quartz buffer. The magmas range from andesitic to rhyodacitic in composition, and from shortly pre-mineralization (~61 Ma) to shortly post-mineralization (~57 Ma) in age. In three samples with particularly well-recognizable former anhydrite phenocrysts, their modal abundance could be quantified based on high-resolution scans of polished hand specimens. The observed modal anhydrite abundances of 0.63–1.8 vol% translate into minimum magma sulfur contents of 0.20–0.56 wt% S. The highest sulfur content of 0.56 wt% S is difficult to reconcile with available anhydrite solubility models, but it could be reproduced in an anhydrite solubility experiment performed at 950 °C and 1.15 GPa on a natural latite containing 13.1 wt% dissolved H2O. The sample with the second-highest sulfur content of 0.26 wt% S requires ~10 wt% H2O in the silicate melt, and, consequently, a minimum pressure of ~0.5 GPa. Taken together, the results suggest that the magmas of the Central Mining District were extremely hydrous and thus originated from great depth. Indeed, their major element compositions and reconstructed H2O and S contents agree well with experimentally observed and numerically predicted compositions of residual silicate melts after 50–70 wt% crystallization of ordinary arc basalts at high pressure and high oxygen fugacities.

New Mexico↗
USGS2026

Alternative approaches to dryland reclamation enhance vegetation cover and soil stability at a former uranium mine

Introduction Conventional reclamation methods to recover dryland ecosystems after mineral extraction often have low success. Alternative reclamation techniques may help overcome the many challenges to establishing persistent native vegetation and stable soils. Objectives Compare conventional reclamation approaches that focus primarily on soil stabilization to alternative approaches that may improve native ecosystem restoration at the Kanab North Mine in northern Arizona. Methods In a fully crossed experiment, conventional seed mix (native and non-native species) and seeding methods (drill-seeding) were compared to alternative practices, including a native-only seed mix, connectivity modifiers (ConMods) with hand seeding, and a biocrust inoculation. Restoration metrics like plant establishment, species composition, soil surface cover and stability, biocrust establishment, and near-surface wind-driven sediment were monitored over the first 5 years post-reclamation. Results While all restoration metrics improved with time, compared to traditional methods, ConMods increased total, graminoid, and native plant species cover, and the native-only seed mix increased woody, native, and perennial species cover. Biocrust inoculation increased late-successional biocrust development, but biocrusts only persisted over 5 years in combination with ConMods. Soil stability increased in all treatments, but both ConMods and biocrust inoculation increased stability compared to traditional practices. Conclusion Overall, alternative approaches to reclamation tested here (ConMods, native seed, and biocrust inoculation) were more effective than traditional practices at increasing total plant cover, facilitating biocrust establishment, and promoting soil stability after uranium mine reclamation.

Arizona↗
USGS2026

Family life is critical for migration and survival in a long-lived social bird

Extended parental care is common among birds and particularly well known among long-lived migratory species. Yet, factors influencing the duration of parental care are poorly understood, and empirical evidence for the functional importance of family life for offspring development is scarce. Using unique tracking and genetic data of 55 adult and juvenile migratory Bewick’s swans, among which 18 parent-offspring pairs and 13 sibling pairs, we quantify variation in family bond duration and identify the cause and consequences of their dissolution. Families generally broke up during the second half of the first northward migration of the offspring, when offspring were nearly one year old. Earlier separation occurred on the wintering grounds in response to disturbance ( n = 10 juveniles) and led to delayed migration and, critically, lower survival (40 vs. 86%). Our results provide rare empirical evidence that family bonds, as a pathway for social learning, are not just important, but vital to the migration and survival of young family-living birds.

Behavioral Ecology and Sociobiology↗
USGS2024

Projections of multiple climate-related coastal hazards for the US Southeast Atlantic

Faced with accelerating sea level rise and changing ocean storm conditions, coastal communities require comprehensive assessments of climate-driven hazard impacts to inform adaptation measures. Previous studies have focused on flooding but rarely on other climate-related coastal hazards, such as subsidence, beach erosion and groundwater. Here, we project societal exposure to multiple hazards along the Southeast Atlantic coast of the United States. Assuming 1 m of sea level rise, more than 70% of the coastal residents and US \ $ 1 trillion in property are in areas projected to experience shallow and emerging groundwater, 15 times higher than daily flooding. Storms increase flooding exposure by an order of magnitude over daily flooding, which could impact up to ~50% of all coastal residents and US \ $ 770 billion in property value. The loss of up to ~80% of present-day beaches and high subsidence rates that currently affect over 1 million residents will exacerbate flooding and groundwater hazard risks.

Florida, Georgia, North Carolina, South Carolina, ↗
USGS2026

Evaluating harvest liberalization strategies on population dynamics of southern latitude temperate-breeding Canada geese

The recovery of the Canada goose ( Branta canadensis ) is one of North America's greatest conservation success stories. Today, continental abundance of temperate-breeding Canada geese (those breeding in southern Canada and lower 48 states in the United States) greatly exceeds historical levels. As a result of increased abundance, human–goose conflicts have also increased, ranging from private and agricultural property damage to human health concerns. Managers have primarily attempted to lower Canada goose populations using hunter harvest via liberalized hunting regulations (increased bag limits and total hunting days). To evaluate the effectiveness of harvest strategies for temperate-breeding Canada geese, managers need a better understanding of how liberalized hunting regulations affect population dynamics. We estimated survival and harvest probabilities, abundance, and recovery distribution of temperate-breeding Canada geese banded in Arkansas, USA, during 2005–2020. We found that adult harvest probabilities declined overall during the study and adult survival probabilities increased. Annual abundances of juvenile geese (≤1 year old) declined during the study, whereas there was no detectable trend in abundance of the adult population over time. Most Canada geese breeding in Arkansas were shot in Arkansas, indicating potential for population dynamics to be influenced largely by state-specific harvest regulations. However, our results suggest that harvest liberalization as a management tool may have limited capacity to further influence population dynamics of Canada geese. Declines in productivity and recruitment likely had a greater influence on the similar observed declines in juvenile and adult abundances, respectively, during our study. More research is needed to better understand the ecological mechanism affecting the population dynamics of Canada geese in both urban and rural environments.

Arkansas↗
USGS2024

Developing international standards and guidelines for disseminating and validating simulated ground motions

We are leading an effort to develop international standards and guidelines for curating, disseminating, and validating simulated ground-motion data. This effort is organized as a working group within the Consortium of Organizations for Strong Motion Observation Systems (COSMOS). In 2022 we held online workshops on 7 and 8 June and 20 October. The first workshop focused on curating and disseminating simulated ground-motion data. The second workshop focused on validating simulated ground-motions for engineering applications. About 100 people participated in each of the workshops with strong representation from North America, Europe, and western Asia. In the coming year, we intend to form a technical committee to draft the international guidelines and standards while continuing to engage stakeholders from across the globe through online and in-person meetings. The key points from the workshops include: (1) Numerous groups are generating simulated earthquake ground motions and making them openly available; however there is very little coordination among groups to provide consistent interfaces for searching and retrieving data; (2) Standardizing interfaces for metadata and data access should consider agile approaches that can adapt to changing capabilities and user needs while building upon existing efforts; (3) A distributed architecture is preferred by most participants to allow institutions to host and manage their own data while broadcasting their holdings to a combined catalog; (4) Validation of ground-motion simulations applies to the entire workflow for simulating earthquake ground-motions, including the rupture model, seismic velocity model, and seismic wave propagation software; (5) Metrics to evaluate the validation are application dependent; more research is needed to tie structural response characteristics to ground-motion characteristics; and (6) Validation results should provide a clear, transparent, and quantitative assessment of the simulated ground motions.

Conference Paper↗
USGS2024

Hyperspectral (VNIR-SWIR) analysis of roll front uranium host rocks and industrial minerals from Karnes and Live Oak Counties, Texas Coastal Plain

VNIR-SWIR (400–2500 nm) reflectance measurements were made on the surfaces of various cores, cuttings and sample splits of sedimentary rocks from the Tertiary Jackson Group, and Catahoula, Oakville and Goliad Formations. These rocks vary in composition and texture from mudstone and claystone to sandstone and are known host rocks for roll front uranium occurrences in Karnes and Live Oak Counties, Texas. Spectral reflectance profiles, 569 in total, were reduced to 125 representative spectral signatures, which were analyzed using the U.S. Geological Survey's (USGS) Material Identification and Characterization Algorithm (MICA). MICA uses an automated continuum-removal procedure together with a least-squares linear regression to determine the fit of observed sample spectral absorption features to those of reference mineral standards in a spectral library. The reference minerals include various clay, mica, carbonate, ferric and ferrous iron minerals and their mixtures. In addition, absorption feature band-depth analysis was done to identify rock surfaces exhibiting absorption features related to uranium and zeolite minerals, which were not included in the command files used to execute MICA. Rocks from each of the four geologic units produced broadly similar spectral signatures as a result of comparable mineral compositions, but there were some notable differences. For example, Ca- and Na-montmorillonite was matched most frequently to the spectral absorption features in 2-μm (∼2000–2500 nm) wavelengths, while goethite occurred often at 1-μm (∼400–1000 nm) wavelengths. The latter is related to limonitic iron-staining in and around oxidized zones of the uranium roll front as described in previous papers. Rocks of the Jackson Group differed from those of the Catahoula, Oakville and Goliad units in that the former exhibited spectral features we interpret as being due to the presence of lignite-bearing mudstone layers. Goliad rocks exhibit spectral features related to dolomite, gypsum, anhydrite, and an unidentified green clay mineral that is possibly glauconite . Jackson Group rocks also exhibit weak but well-resolved absorption features at 964 and 1157 nm related to either or both zeolite minerals clinoptilolite and heulandite. These zeolite minerals and a few spectra exhibiting hydrous silica absorption features are indicative of alteration of volcanic glass in tuffaceous mudstone and claystone layers. A few sample spectra exhibited strong absorption features at around 1135 nm related to the uranium mineral coffinite. Both the 1135 nm coffinite and 1157 nm zeolite absorption features overlap somewhat, potentially making them difficult to distinguish without additional hyperspectral field, laboratory or remote sensing data. The results of this study were compared to mixtures of minerals described for ore, gangue and alteration minerals in deposit models for sandstone-hosted uranium, sedimentary bentonite and sedimentary zeolite. Use of these spectra can help facilitate mapping of both waste materials from the legacy mining of the above commodities, as well as future exploration and resource assessment activities.

Texas↗