Geology Reports⌕ Search

SEARCH · Geology Reports

Results for “Information Services and Use”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources
USGS2016

Flood-inundation maps for Lake Champlain in Vermont and in northern Clinton County, New York

Digital flood-inundation maps for an approximately100-mile length of Lake Champlain in Addison, Chittenden, Franklin, and Grand Isle Counties in Vermont and northern Clinton County in New York were created by the U.S. Geological Survey (USGS) in cooperation with the International Joint Commission (IJC). The flood-inundationmaps, which can be accessed through the International Joint Commission (IJC) Web site at http://www.ijc.org/en_/ , depict estimates of the areal extent flooding correspondingto selected water levels (stages) at the USGS lake gage on the Richelieu River (Lake Champlain) at Rouses Point, N.Y. (station number 04295000). In this study, wind and seiche effects (standing oscillating wave with a long wavelength) were not taken into account and the flood-inundation mapsreflect 11 stages (elevations) for Lake Champlain that are static for the study length of the lake. Near-real-time stages at this lake gage, and others on Lake Champlain, may be obtained on the Internet from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service Advanced Hydrologic Prediction Service at http:/water.weather.gov/ahps/ , which also forecasts flood hydrographs at the Richelieu River (Lake Champlain) at Rouses Point. Static flood boundary extents were determined for LakeChamplain in Addison, Chittenden, Franklin, and Grand Isle Counties in Vermont and northern Clinton County in New York using recently acquired (2013–2014) lidar (light detection and ranging) and may be referenced to any of the five USGS lake gages on Lake Champlain. Of these five lakgages, USGS lake gage 04295000, Richelieu River (Lake Champlain) at Rouses Point, N.Y., is the only USGS lake gage that is also a National Weather Service prediction location. Flood boundary extents for the Lake Champlain static flood-inundation map corresponding to the May 201 flood(103.2 feet [ft], National Geodetic Vertical Datum [NGVD] 29) were evaluated by comparing these boundary extents against the inundation area extents determined for the May 2011 flood (which incorporated documented high-water marksfrom the flood of May 201) (Bjerklie and others, 2014). A digital elevation model (DEM) was created by USGS, within a geographic information system (GIS), from the recently flown and processed light detection and ranging(lidar) data (2013–2014) in Vermont and the lake shore area of northern Clinton County in New York. The lidar data have a vertical accuracy of 0.3 to 0.6-ft (9.6 to 18.0-centimeters [cm]) and a horizontal resolution of 2.3 to 4.6 ft (0.7 to 1.4 meters). This DEM was used in determining the floodboundary for 11 flood stages at 0.5-ft intervals from 100.0 to104.0 ft (NGVD 29) and 1-ft intervals from 104.0 to 106.0 ft (NGVD 29) as referenced to the USGS lake gage 04295000, Richelieu River (Lake Champlain) at Rouses Point, N.Y. In addition, the May 2011 flood-inundation area for elevation103.20 ft (NGVD 29) (102.77 ft, North American Vertical Datum [NAVD] 88) was determined from this DEM. The May 2011 flood is the highest recorded lake water level (stage)at the Rouses Point, N.Y., lake gage. Flood stages greater than 101.5 ft (NGVD 29) exceed the “major flood stage”as defined by the NationalWeather Service for USGS lake gage 04295000. The availability of these maps, along with Internet information regarding current stage from the USGS lake gage and forecasted high-flow stages from the NationalWeather Service, will provide emergency management personnel and residents with information that is critical for flood responseactivities such as evacuations and road closures, as well as for post-flood recovery eforts.

New York, Vermont↗
USGS2023

Gains and gaps in knowledge surrounding freshwater mollusk ecosystem services

Ecosystems provide essential services to people including food, water, climate regulation, and aesthetic experiences. Biodiversity can enhance and stabilize ecosystem function and the resulting services natural systems provide. Freshwater mollusks are a diverse group that provide a variety of ecosystem services through their feeding habits (e.g., filter feeding, grazing), top-down and bottom-up effects on food webs, provisioning of habitat, use as a food resource by people, and cultural importance. Research focused on quantifying the direct and indirect ways mollusks influence ecosystem services may help inform policy makers and the public about the value of mollusk communities to society. The Freshwater Mollusk Conservation Society highlighted the need to evaluate mollusk ecosystem services in their 2016 National Strategy for the Conservation of Native Freshwater Mollusks, and, while significant progress has been made, considerable work remains across the research, management, and outreach communities. We briefly review the global status of native freshwater mollusks, assess the current state of knowledge regarding their ecosystem services, and highlight recent advances and knowledge gaps to guide further research and conservation actions. Our intention is to provide ecologists, conservationists, economists, and social scientists with information to improve science-based consideration of the social, ecological, and economic value of mollusk communities to healthy aquatic systems.

Freshwater Mollusk Biology and Conservation↗
USGS2014

Thresholds for protecting Pacific Northwest ecosystems from atmospheric deposition of nitrogen: state of knowledge report

The National Park Service and U.S. Forest Service manage areas in the states of Idaho, Oregon, and Washington – collectively referred to in this report as the Pacific Northwest - that contain significant natural resources and provide many recreational opportunities. The agencies are mandated to protect the air quality and air pollution-sensitive resources on these federal lands. Human activity has greatly increased the amount of nitrogen emitted to the atmosphere, resulting in elevated amounts of nitrogen being deposited in park and forest ecosystems. There is limited information in the Pacific Northwest about the levels of nitrogen that negatively affect natural systems, i.e., the critical loads. The National Park Service and U.S. Forest Service, with scientific input from the U.S. Geological Survey, have developed an approach for accumulating additional nitrogen critical loads information in the Pacific Northwest and using the data in planning and regulatory arenas. As a first step in that process, this report summarizes the current state of knowledge about nitrogen deposition, effects, and critical loads in the region. It also describes ongoing research efforts and identifies and prioritizes additional data needs.

Idaho;Oregon;Washington↗
USGS1992

The Parkfield earthquake prediction of October 1992; the emergency services response

The science of earthquake prediction is interesting and worthy of support. In many respects the ultimate payoff of earthquake prediction or earthquake forecasting is how the information can be used to enhance public safety and public preparedness. This is a particularly important issue here in California where we have such a high level of seismic risk historically, and currently, as a consequence of activity in 1989 in the San Francisco Bay Area, in Humboldt County in April of this year (1992), and in southern California in the Landers-Big Bear area in late June of this year (1992). We are currently very concerned about the possibility of a major earthquake, one or more, happening close to one of our metropolitan areas. Within that context, the Parkfield experiment becomes very important.

Earthquakes & Volcanoes (USGS)↗
USGS2021

Risk-informed levee erosion countermeasure site selection and design in the Sacramento area part 1: Soil sampling, testing, and data processing

USACE partnered with the United States Department of Agriculture, Agricultural Research Service, United States Geological Survey, and Texas A&M University to evaluate the erodibility of the river banks and levees to inform probabilistic numerical simulations using the Bank Stability and Toe Erosion Model (BSTEM). This paper discusses the measurement of the intrinsic erosion and geotechnical properties of the soil for improved BSTEM results and is the first of two parts. Sampling and testing were conducted at select sites to obtain the soil stratigraphy and collect samples for estimation of engineering properties. Soil erodibility was measured using the Erosion Function Apparatus test, the Borehole Erosion Test, the Pocket Erodometer Test, and the mini-Jet Erosion Test. Critical evaluation of previously existing datasets and the collection of these new datasets helped to provide better definition of the range in erosion parameters for improved probabilistic erosion estimates using BSTEM for risk-informed levee erosion countermeasure site selection and design.

California↗
USGS2021

Risk-informed levee erosion countermeasure site selection and design in the Sacramento area part 2: Probabilistic numerical simulation of bank erosion

USACE partnered with the United States Department of Agriculture, Agricultural Research Service, United States Geological Survey, and Texas A&M University to evaluate the erodibility of the river banks and levees to inform probabilistic numerical simulations using the Bank Stability and Toe Erosion Model (BSTEM). This paper, the second of two parts, addresses processing the collected data to inform inputs for probabilistic bank erosion estimates in BSTEM. Measuring the intrinsic soil properties for BSTEM is discussed in part one. Soil critical shear stress and soil erodibility coefficients were calibrated by Unified Soil Classification soil type to observed erosion on the American River. Adjustments were made in the probability density functions for these parameters to reflect field-measured variability and carry forward the reduction in error achieved during calibration. The resulting calibrated values were tested at additional sites, validating the resulting critical shear stress and soil erodibility coefficient values and probability density functions for more robust probabilistic bank erosion estimates using BSTEM.

California↗
USGS2015

Interactive access to LP DAAC satellite data archives through a combination of open-source and custom middleware web services

Current methods of searching for and retrieving data from satellite land remote sensing archives do not allow for interactive information extraction. Instead, Earth science data users are required to download files over low-bandwidth networks to local workstations and process data before science questions can be addressed. New methods of extracting information from data archives need to become more interactive to meet user demands for deriving increasingly complex information from rapidly expanding archives. Moving the tools required for processing data to computer systems of data providers, and away from systems of the data consumer, can improve turnaround times for data processing workflows. The implementation of middleware services was used to provide interactive access to archive data. The goal of this middleware services development is to enable Earth science data users to access remote sensing archives for immediate answers to science questions instead of links to large volumes of data to download and process. Exposing data and metadata to web-based services enables machine-driven queries and data interaction. Also, product quality information can be integrated to enable additional filtering and sub-setting. Only the reduced content required to complete an analysis is then transferred to the user.

IEEE Geoscience and Remote Sensing Letters↗
USGS1999

Assessing biological effects from highway-runoff constituents

Increased emphasis on evaluation of nonpoint-source pollution has intensified the need for techniques that can be used to discern the toxicological effects of complex chemical mixtures. In response, the use of biological assessment techniques is receiving increased regulatory emphasis. When applied with documented habitat assessment and chemical analysis, these techniques can increase our understanding of the influence of environmental contaminants on the biological integrity and ecological function of aquatic communities. The contaminants of greatest potential concern in highway runoff are those that arise from highway construction, maintenance, and use. The major contaminants of interest are deicers; nutrients; metals; petroleum-related organic compounds, such as polycyclic aromatic hydrocarbons (PAHs), benzene, toluene, ethylbenzene, and xylene (BTEX), and methyl tert -butyl ether (MTBE); sediment washed off the road surface; and agricultural chemicals used in highway maintenance. Hundreds, if not thousands, of biological endpoints (measurable responses of living organisms) may be either directly or associatively affected by contaminant exposure. Measurable effects can occur throughout ecosystem processes across the wide range of biological complexity, ranging from responses at the biochemical level to the community level. The challenge to the environmental scientist is to develop an understanding of the relationship of effects at various levels of biological organization in order to determine whether a causal relationship exists between chemical exposure and substantial ecological impairment. This report provides a brief history of the evolution of biological assessment techniques, a description of the major classes of contaminants that are of particular interest in highway runoff, an overview of representative biological assessment techniques, and a discussion of data-quality considerations. Published reports with a focus on the effects of highway runoff on the local ecosystem were reviewed to provide information on (1) the suitability of the existing data for a quantitative national synthesis, (2) the methods available to study the effects of highway runoff on local ecosystems, and (3) the potential for adverse effects on the roadside environment and receiving waters. Although many biological studies have been done, the use of different methods and a general lack of sufficient documentation precludes a quantitative national synthesis on the basis of the existing data. The Federal Highway Administration, the U.S. Environmental Protection Agency, the U.S. Geological Survey, the Intergovernmental Task Force on Monitoring Water Quality, and the National Resources Conservation Service all have developed and documented methods for assessing the effects of contaminants on ecosystems in receiving waters. These published methods can be used to formulate a set of protocols to provide consistent information from highway-runoff studies. Review of the literature indicates (qualitatively) that highway runoff (even from highways with high traffic volume) may not usually be acutely toxic. Tissue analysis and community assessments, however, indicate effects from highway- runoff sediments near discharge points (even from sites near highways with relatively low traffic volumes). At many sites, elevated concentrations of highway-runoff constituents were measured in tissues of species associated with aquatic sediments. Community assessments also indicate decreases in the diversity and productivity of aquatic ecosystems at some sites receiving highway runoff. These results are not definitive, however, and depend on many site-specific criteria that were not sufficiently documented in most of the studies reviewed.

Open-File Report↗
USGS2019

Demonstrating the value of Earth observations—methods, practical applications, and solutions—group on Earth observations side event proceedings

Executive Summary The U.S. Geological Survey, the National Oceanic and Atmospheric Administration, the European Association for Remote Sensing Companies, and the European Space Agency in coordination with the GEOValue Community hosted a side event to the Group on Earth Observations Plenary on October 23–24, 2017, in Washington, D.C. The workshop, entitled “Demonstrating the Value of Earth Observations: Methods, Practical Applications and Solutions,” brought together more than 60 international experts including economists, scientists, and engineers to consider the state of the science and applications of valuing Earth observations (EO). This 2-day workshop built upon previous activities developed under the GEOValue initiative. This workshop brought together expert analysts from multiple disciplines and backgrounds who are developing methods to identify and measure the value of information generated from the use of satellite and in-situ data. The mix of government agencies, international financial institutions, and independent consultants who participated in the workshop blended to develop a rich mix of views, approaches, and outcomes. During the first part of the workshop, the focus was on the latest science in valuing EO. A number of methodologies were described. Approaches generally assess the societal benefits of specific actions (for example, investments in EO). Some methods focus on broad measures of economic activity (for example, gross domestic product) or methods to assess total economic value such as contingent valuation surveys. Alternatively, use-case approaches (a use case is defined as an evaluation in which one or more decisions, applications, or other uses of data, information, and information products are specifically considered) start with the specific actions and how information is used to support decision making and affect outcomes. The second part of the meeting was focused on the use and development of value chains and decision trees. A value chain can be defined as the set of value-adding activities that one or more organizations perform in creating and distributing goods and services. In terms of EO, the value chain approach can be applied to consider societal benefits of the data and assess the value of data and data features. The EO value chain considers the geospatial data sources and the processing of the data into value added information to be incorporated into decision-support systems, leading to decision makers’ actions. To understand the value of EO, one would also need to recognize the demand side of the equation or how EO benefits users. Extending the value chain concept and incorporating tenets of Bayesian decision making, a decision tree would include one or more use cases. The value provided by the marginal increase in information could flow from one or several parts of the supply side of the value chain. The decision tree is based on the premise that information has no value if it is not used in at least one decision. By connecting the value chain and the decision tree, a framework is created that allows for conceptualizing the value of EO in its many uses. One can then apply economic techniques to monetize the marginal benefit of an outcome with information versus one without. A third part of the meeting applied the value chain and decision-tree frameworks to five specific thematic areas, each with the focus of using information for a decision point: Effect of increasing temperatures on human health; Flooding—Mitigating, managing, and avoiding impacts to safety and property damage; Harmful algal blooms—Effects on human health, recreation, and tourism; Energy and mineral supply—Mitigating, managing, and avoiding impacts of shortfalls on the economy; and Effects of natural hazards on transportation systems—Effects on mobility, safety, and the economy. During the working session, five separate groups worked to define and delineate the value chains and decision trees associated with each topic, discussing the related challenges and data needs. The outcomes were reported back to the full group. Because of the complexity of the topics, most groups first identified a network of value chains and then narrowed the scope to develop a single value chain to address their group’s topic. Although they worked separately and on different topics, the groups came to similar conclusions, concurring that the value chain and decision-tree frameworks are very effective for informing quantitative impact assessments and developing a relatable narrative to assist the public in understanding the link between EO and citizens.

Open-File Report↗
USGS2015

Flood-inundation maps and wetland restoration suitability index for the Blue River and selected tributaries, Kansas City, Missouri, and vicinity, 2012

Digital flood-inundation maps for a 39.7-mile reach of the Blue River and selected tributaries (Brush Creek, Indian Creek, and Dyke Branch) at Kansas City, Missouri, and vicinity, were created by the U.S. Geological Survey (USGS) in cooperation with the City of Kansas City, Missouri. The flood-inundation maps, accessed through the USGS Flood-Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the spatial extent and depth of flooding corresponding to selected water levels (stages) at 15 reference streamgages and associated stream reaches in the Blue River Basin. Near-real-time stage data from the streamgages may be obtained from the USGS National Water Information System at http://waterdata.usgs.gov/ or the National Weather Service (NWS) Advanced Hydrologic Prediction Service (AHPS) at http://water.weather.gov/ahps/, which also forecasts flood hydrographs at selected sites. Flood profiles were computed for each of 15 reaches by means of one-dimensional or two-dimensional hydraulic models. The models were calibrated by using the current stage-streamflow relations at 10 USGS streamgages and documented high-water marks from the flood of June 14, 2010. Hydraulic models were then used to compute water-surface profiles for flood stages at 1-foot intervals referenced to the streamgage datum and ranging from the National Weather Service Action stage, or near bankfull streamflow, through the stage corresponding to, or exceeding, the estimated 0.2-percent annual exceedance probability flood (500-year recurrence interval flood). The simulated water-surface profiles were then combined with a geographic information system (GIS) terrain model derived from light detection and ranging (lidar) data having a vertical accuracy of less than 0.6 foot and maximum nominal horizontal post spacing of 2.46–3.28 feet to delineate the area flooded at each 1-foot increment of stage. The availability of these flood-inundation maps, along with Internet information regarding current stage from the USGS streamgages and forecasted high-flow stages from the NWS, will provide emergency management personnel and residents with information that is critical for flood response activities such as evacuations and road closures, as well as for postflood recovery efforts. Additional information in this report includes maps of simulated stream velocity for an 8.2-mile, two-dimensional modeled reach of the Blue River and a Wetland Restoration Suitability Index (WRSI) generated for the study area that was based on hydrologic, topographic, and land-use digital feature layers. The calculated WRSI for the selected flood-plain area ranged from 1 (least suitable for possible wetland mitigation efforts) to 10 (most suitable for possible wetland mitigation efforts). A WRSI of 5 to 10 is most closely associated with existing riparian wetlands in the study area. The WRSI allows for the identification of lands along the Blue River and selected tributaries that are most suitable for restoration or creation of wetlands. Alternatively, the index can be used to identify and avoid disturbances to areas with the highest potential to support healthy sustainable riparian wetlands.

Missouri↗
USGS2015

Flood-inundation maps for South Fork Peachtree Creek from the Brockett Road bridge to the Willivee Drive bridge, DeKalb County, Georgia

Digital flood-inundation maps for a 5.3-mile reach of South Fork Peachtree Creek that extends from about 500 feet above the Brockett Road bridge to the Willivee Drive bridge were developed by the U.S. Geological Survey (USGS) in cooperation with DeKalb County, Georgia. The flood-inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation , depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage at South Fork Peachtree at Casa Drive, near Clarkston, Georgia (02336152). Real-time stage information from this USGS streamgage may be obtained at http://waterdata.usgs.gov/ and can be used in conjunction with these maps to estimate near real-time areas of inundation. The National Weather Service (NWS) is incorporating results from this study into the Advanced Hydrologic Prediction Service (AHPS) flood-warning system ( http://water.weather.gov/ahps/ ). A one-dimensional step-backwater model was developed using the U.S. Army Corps of Engineers HEC–RAS software for South Fork Peachtree Creek and was used to compute flood profiles for a 5.3-mile reach of South Fork Peachtree Creek. The model was calibrated using the most current (2015) stage-discharge relation at the USGS streamgage South Fork Peachtree at Casa Drive, near Clarkston, Georgia (02336152). The hydraulic model was then used to simulate 13 water-surface profiles at 0.5-foot intervals at the South Fork Peachtree Creek near Clarkston streamgage. The profiles ranged from just above bankfull stage (6.0 feet) to approximately 3.21 feet above the highest recorded water level (12.0 feet). The simulated water-surface profiles were then combined with a geographic information system digital elevation model—derived from light detection and ranging data having a 5.0-foot horizontal resolution—to delineate the area flooded at each 0.5-foot interval of stream stage. The availability of these flood-inundation maps, when combined with real-time stage information from USGS streamgages, provides emergency management personnel and residents with critical information during flood-response activities, such as evacuations and road closures, in addition to post-flood recovery efforts.

Georgia↗
USGS2012

Flood-inundation maps for Peachtree Creek from the Norfolk Southern Railway bridge to the Moores Mill Road NW bridge, Atlanta, Georgia

Digital flood-inundation maps for a 5.5-mile reach of the Peachtree Creek from the Norfolk Southern Railway bridge to the Moores Mill Road NW bridge, were developed by the U.S. Geological Survey (USGS) in cooperation with the City of Atlanta, Georgia. The inundation maps, which can be accessed through the USGS Flood Inundation Mapping Science Web site at http://water.usgs.gov/osw/flood_inundation/, depict estimates of the areal extent and depth of flooding corresponding to selected water levels (stages) at the USGS streamgage at Peachtree Creek at Atlanta, Georgia (02336300) and the USGS streamgage at Chattahoochee River at Georgia 280, near Atlanta, Georgia (02336490). Current water level (stage) at these USGS streamgages may be obtained at http://waterdata.usgs.gov/ and can be used in conjunction with these maps to estimate near real-time areas of inundation. The National Weather Service (NWS) is incorporating results from this study into the Advanced Hydrologic Prediction Service (AHPS) flood warning system (http:/water.weather.gov/ahps/). The NWS forecasts flood hydrographs at many places that commonly are collocated at USGS streamgages. The forecasted peak-stage information for the USGS streamgage at Peachtree Creek, which is available through the AHPS Web site, may be used in conjunction with the maps developed in this study to show predicted areas of flood inundation. A one-dimensional step-backwater model was developed using the U.S. Army Corps of Engineers HEC–RAS software for a 6.5-mile reach of Peachtree Creek and was used to compute flood profiles for a 5.5-mile reach of the creek. The model was calibrated using the most current stage-discharge relations at the Peachtree Creek at Atlanta, Georgia, streamgage (02336300), and the Chattahoochee River at Georgia 280, near Atlanta, Georgia, streamgage (02336490) as well as high water marks collected during the 2010 annual peak flow event. The hydraulic model was then used to determine 50 water-surface profiles. The profiles are for 10 flood stages at the Peachtree Creek streamgage at 1-foot intervals referenced to the streamgage datum and ranging from just above bankfull stage (15.0 feet) to approximately the highest recorded water level at the streamgage (24.0 feet). At each stage on Peachtree Creek, five stages at the Chattahoochee River streamgage, from 26.4 feet to 38.4 feet in 3-foot intervals, were used to determine backwater effects. The simulated water-surface profiles were then combined with a geographic information system digital elevation model—derived from Light Detection and Ranging (LiDAR) data having a 0.3-foot vertical and 16.4-foot horizontal resolution—to delineate the area flooded for each 1-foot increment of stream stage. The availability of these maps, when combined with real-time information regarding current stage from USGS streamgages and forecasted stream stages from the NWS, provide emergency management personnel and residents with critical information during flood response activities, such as evacuations and road closures as well as for postflood-recovery efforts.

Georgia↗
USGS2010

Faunal assemblages and multi-scale habitat patterns in headwater tributaries of the South Fork Trinity River - an unregulated river embedded within a multiple-use landscape

Headwaters can represent 80% of stream kilometers in a watershed, and they also have unique physical and biological properties that have only recently been recognized for their importance in sustaining healthy functioning stream networks and their ecological services. We sampled 60 headwater tributaries in the South Fork Trinity River, a 2,430 km2, mostly forested, multiple-use watershed in northwestern California. Our objectives were: (1) to differentiate unique headwater types using 69 abiotic and vegetation variables measured at three spatial scales, and then to reduce these to informative subsets; (2) determine if distinct biota occupied the different tributary types; (3) determine the environmental attributes associated with the presence and abundance of these biotic assemblages; and (4) using niche modeling, determine key attribute thresholds to illustrate how these biota could be employed as metrics of system integrity and ecological services. Several taxa were sufficiently abundant and widespread to use as bio-indicators: the presence and abundance of steelhead trout (Oncorhynchus mykiss), herpetofauna (reptile and amphibian) species richness, and signal crayfish (Pacifastacus leniusculus) represented different trophic positions, value as commercial resources (steelhead), sensitivity to environmental stress (amphibians), and indicators of biodiversity (herpetofauna species richness). Herpetofauna species richness did not differ, but abundances of steelhead trout, signal crayfish, and amphibian richness all differed significantly among tributary types. Niche models indicated that distribution and abundance patterns in both riparian and aquatic environments were associated with physical and structural attributes at multiple spatial scales, both within and around reaches. The bio-indicators responded to unique sets of attributes, reflecting the high environmental heterogeneity in headwater tributaries across this large watershed. These niche attributes represented a wide range of headwater environments, indicating responses to a number of natural and anthropogenic conditions, and demonstrated the value of using a suite of bio-indicators to elucidate watershed conditions, and to examine numerous disturbances that may influence ecological integrity.

Animal Biodiversity and Conservation↗
USGS2002

Near-real-time simulation and internet-based delivery of forecast-flood inundation maps using two-dimensional hydraulic modeling--A pilot study for the Snoqualmie River, Washington

A system of numerical hydraulic modeling, geographic information system processing, and Internet map serving, supported by new data sources and application automation, was developed that generates inundation maps for forecast floods in near real time and makes them available through the Internet. Forecasts for flooding are generated by the National Weather Service (NWS) River Forecast Center (RFC); these forecasts are retrieved automatically by the system and prepared for input to a hydraulic model. The model, TrimR2D, is a new, robust, two-dimensional model capable of simulating wide varieties of discharge hydrographs and relatively long stream reaches. TrimR2D was calibrated for a 28-kilometer reach of the Snoqualmie River in Washington State, and is used to estimate flood extent, depth, arrival time, and peak time for the RFC forecast. The results of the model are processed automatically by a Geographic Information System (GIS) into maps of flood extent, depth, and arrival and peak times. These maps subsequently are processed into formats acceptable by an Internet map server (IMS). The IMS application is a user-friendly interface to access the maps over the Internet; it allows users to select what information they wish to see presented and allows the authors to define scale-dependent availability of map layers and their symbology (appearance of map features). For example, the IMS presents a background of a digital USGS 1:100,000-scale quadrangle at smaller scales, and automatically switches to an ortho-rectified aerial photograph (a digital photograph that has camera angle and tilt distortions removed) at larger scales so viewers can see ground features that help them identify their area of interest more effectively. For the user, the option exists to select either background at any scale. Similar options are provided for both the map creator and the viewer for the various flood maps. This combination of a robust model, emerging IMS software, and application interface programming should allow the technology developed in the pilot study to be applied to other river systems where NWS forecasts are provided routinely.

Washington↗
USGS2015

Incorporating temporal variation in seabird telemetry data: time variant kernel density models

A key component of the Mid-Atlantic Baseline Studies project was tracking the individual movements of focal marine bird species (Red-throated Loon [Gavia stellata], Northern Gannet [Morus bassanus], and Surf Scoter [Melanitta perspicillata]) through the use of satellite telemetry. This element of the project was a collaborative effort with the Department of Energy (DOE), Bureau of Ocean Energy Management (BOEM), the U.S. Fish and Wildlife Service (USFWS), and Sea Duck Joint Venture (SDJV), among other organizations. Satellite telemetry is an effective and informative tool for understanding individual animal movement patterns, allowing researchers to mark an individual once, and thereafter follow the movements of the animal in space and time. Aggregating telemetry data from multiple individuals can provide information about the spatial use and temporal movements of populations. Tracking data is three dimensional, with the first two dimensions, X and Y, ordered along the third dimension, time. GIS software has many capabilities to store, analyze and visualize the location information, but little or no support for visualizing the temporal data, and tools for processing temporal data are lacking. We explored several ways of analyzing the movement patterns using the spatiotemporal data provided by satellite tags. Here, we present the results of one promising method: time-variant kernel density analysis (Keating and Cherry, 2009). The goal of this chapter is to demonstrate new methods in spatial analysis to visualize and interpret tracking data for a large number of individual birds across time in the mid-Atlantic study area and beyond. In this chapter, we placed greater emphasis on analytical methods than on the behavior and ecology of the animals tracked. For more detailed examinations of the ecology and wintering habitat use of the focal species in the midAtlantic, see Chapters 20-22.

Report↗
USGS1990

Forum on orthophotography: Summary Report

A Forum on Orthophotography was held on May 15, 1990, at the National Aeronautics and Space Administration's Goddard Space Flight Center in Greenbelt, Maryland. The forum was sponsored jointly by the U.S. Soil Conservation Service, the U.S. Geological Survey, the National Governors' Association, and the National Association of Counties. The purpose of the forum was to expand the understanding and use of orthophoto products among the user community, as well as among those currently considering, or as yet unfamiliar with, the use of these products. It was also intended to provide a forum for assessing requirements for, and interest in, orthophoto products and for the identification and discussion of issues and future needs concerning orthophoto use and coordination. The 1-day forum was organized into three major sessions that focussed on technical aspects, user applications, and management issues. The first session presented a brief background and overview of the technical characteristics of standard and digital orthophotos. The second session included formal presentations by Federal, State, and county government agencies on their current and planned applications of orthophoto products, with particular emphasis on their use within geographic information systems. In the third session, private industry addressed their community's interest, capabilities, and potential role. This session also included a proposal by the U.S. Soil Conservation Service for a national cooperative program for the production of l:12,000-scale orthophotoquad products. In addition to the formal presentations, the forum provided a time for open discussion in which attendees had an opportunity to exchange information and make statements about their needs or other items pertinent to the production and dissemination of orthophoto products. Several agency orthophoto product exhibits and interactive demonstrations were also available throughout the day. This report includes a forum agenda and summaries of the various presentations given by the program participants. The appendixes to the report include a list of forum cosponsoring agencies and cooperating organizations, a summary listing of forum registrants by organizational affiliation, and the forum registration list. Also included in the appendkes is the Higher Resolution Orthophoto Products Survey that was sent to each participant following the forum to assist in the identification of near- and longer-term applications, and the determination of requirements, for higher-resolution orthophoto products.

Summary Report↗
USGS2013

Causes and consequences of ecosystem service regionalization in a coastal suburban watershed

The demand for ecosystem services and the ability of natural ecosystems to provide those services evolve over time as population, land use, and management practices change. Regionalization of ecosystem service activity, or the expansion of the area providing ecosystem services to a population, is a common response in densely populated coastal regions, with important consequences for watershed water and nitrogen (N) fluxes to the coastal zone. We link biophysical and historical information to explore the causes and consequences of change in ecosystem service activity—focusing on water provisioning and N regulation—from 1850 to 2010 in a coastal suburban watershed, the Ipswich River watershed in northeastern Massachusetts, USA. Net interbasin water transfers started in the late 1800s due to regionalization of water supply for use by larger populations living outside the Ipswich watershed boundaries, reaching a peak in the mid-1980s. Over much of the twentieth century, about 20 % of river runoff was diverted from reaching the estuary, with greater proportions during drought years. Ongoing regionalization of water supply has contributed to recent declines in diversions, influenced by socioecological feedbacks resulting from the river drying and fish kills. Similarly, the N budget has been greatly perturbed since the suburban era began in the 1950s due to food and lawn fertilizer imports and human waste release. However, natural ecosystems are able to remove most of this anthropogenic N, mitigating impacts on the coastal zone. We propose a conceptual model whereby the amount and type of ecosystem services provided by coastal watersheds in urban regions expand and contract over time as regional population expands and ecosystem services are regionalized. We hypothesize that suburban watersheds can be hotspots of ecosystem service sources because they retain sufficient ecosystem function to still produce services that meet increasing demand from the local population and nearby urban centers. Historical reconstruction of ecosystem service activity provides a perspective that may help to better understand coupled human–natural system processes and lead to more sustainable management of coastal ecosystems.

Massachusetts↗
USGS2022

Biology: Integrating core to essential variables (Bio-ICE) task team report for marine mammals

Marine mammals are wide-ranging, relatively long-lived organisms that play a crucial role in maintaining healthy ocean ecosystems. Often referred to as ecosystem engineers and sentinel species in marine ecosystems, these charismatic megafauna feed at a variety of trophic levels, affecting food web dynamics and cycling of chemicals and nutrients in the water column as well as in benthic habitats, both nearshore and in the deep ocean. An understanding of their abundance and distribution is an essential starting point for evaluating their role in ocean ecosystems. Accordingly, marine mammals have been included among key variables to monitor in ocean observing systems, from core variables for the U.S. Integrated Ocean Observing System (IOOS) to an Essential Ocean Variable (EOV) for the Global Ocean Observing System (GOOS). They also contribute to several Essential Biodiversity Variables (EBVs) for the Group on Earth Observations Biodiversity Observation Network (GEO BON). Further, evaluation of the health of marine mammal populations will help deliver societal benefits by contributing to the UN Decade of Ocean Science for Sustainable Development; informing reporting activities such as the World Ocean Assessment; and supporting achievement of Sustainable Development Goal 14, the post-2020 framework for the Convention for Biological Diversity, and a new treaty for conservation and sustainable use of marine biodiversity beyond national jurisdiction. In the U.S., the National Marine Fisheries Service (NMFS) and the U.S. Fish and Wildlife Service (FWS) are required to produce stock assessments for marine mammals under the Marine Mammal Protection Act (MMPA, 16 U.S.C. §1371 et seq.). Stock assessment analyses require accurate, up to-date information on abundance and distribution to inform appropriate management and/or conservation measures. Despite the availability of information on abundance and distribution within the stock assessment reports, availability and accessibility of the underlying data to the broader ocean observing community and contribution to EOVs remain inconsistent.

Report↗