Geology ReportsSearch

SEARCH · Geology Reports

Results for “Global Change Biology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

552 records · Page 15Linked to original sources

Simulation of groundwater flow in the Long Island, New York regional aquifer system for pumping and recharge conditions from 1900 to 2019

The U.S. Geological Survey has developed a transient, groundwater-flow model that simulates hydrologic conditions in the Long Island aquifer system as part of an ongoing (since 2016) multiyear, cooperative investigation with the New York State Department of Environmental Conservation. The goals of this investigation are to assist stakeholders and resource managers to evaluate the response of the hydrologic system to changes in future hydraulic stresses. Responses in the hydrologic system include changes in water levels in the hydrogeologic units; discharge to streams, coastal waters, and subsurface infrastructure; and the extent of saline groundwater in the aquifers. Hydraulic stresses include future water-supply management and changes in land use and infrastructure. The numerical model synthesizes a diverse set of physiographic, geologic, climatic, land-use, and historical population, water use, and infrastructure data to physically represent the Long Island aquifer system from land surface to bedrock and to simulate annual hydrologic conditions between 1900 and 2019. A three-dimensional hydrogeologic framework was developed from existing and recently collected borehole geologic and geophysical data collected as part of a companion drilling program. Water-transmitting properties of the principal aquifer sediments were defined in three dimensions from new and existing lithologic logs. The distribution of recharge from precipitation was estimated from landscape characteristics and climate data. Anthropogenic recharge from wastewater, leaky infrastructure, and storm runoff were estimated from population, infrastructure, and pumping data. Water-use data, including well locations, depths, and pumping rates, were obtained from historical sources and records and used to estimate pumping stresses continuously in time and space, at an annual average time scale. The data were incorporated into a three-dimensional numerical model using the U.S. Geological Survey finite difference modeling code MODFLOW 6; the model encompassed all of Long Island and surrounding surface waters and simulated historical hydrologic conditions from 1900 to 2019. The calibration process involved trial and error adjustments using prior knowledge to improve general fit to observations followed by an inverse calibration to update and optimize input parameters, using an iterative ensemble smoother algorithm implemented in PEST++ version 5.0. This resulted in a model that generally was in good agreement with observed, dynamically varying hydrologic conditions from 1900 to 2019. The calibrated model was used to develop two base-case models for scenario testing of future, hypothetical conditions where one represented average-annual conditions, and one represented average-seasonal conditions from 2010 to 2019. The model representing average-annual conditions was modified further to represent an alternate sea-level position of 6 feet above the North American Vertical Datum of 1988, and the model representing average-seasonal conditions was modified to represent the average seasonal effects of a 5-year drought imposed upon current hydrologic conditions. Recharge is the sole source of water to the aquifer system; groundwater discharges to coastal water and streams and is withdrawn by pumped wells. Model-estimated annual recharge ranged from about 11 inches in 1965 to 41 inches in 1983. On average, from 2010 to 2019, about 23 percent of water was pumped from wells, and about 47 and 27 percent discharged to coastal waters and streams, respectively; the remaining 4 percent was water that moved into storage in the aquifer matrix. Water levels on Long Island vary naturally during time in response to changes in recharge; the amount of variation is largest in the interior of the island, in areas with highest water table altitudes near groundwater divides and lowest near streams and the coastal waters. The total range of water table altitudes on Long Island between 1900 and 2019 ranged from near 0 to more than 70 feet in western parts of Long Island. The largest range in altitudes is in New York City and is associated with areas of large historical withdrawals between the 1920s and the late 1980s. Water table altitudes generally varied by less than 10 feet in eastern Suffolk County, where the aquifer is under more natural conditions. Saltwater intrusion is of great concern on Long Island, particularly in western Long Island where both the unconfined and confined parts of the aquifer system have been intruded in response to large-scale groundwater withdrawals; however, the volume of freshwater in the islandwide aquifer system only has changed by about 5 percent between 1900 and 2019. The decadal change in the freshwater volume was largest during the early and mid-20th century, corresponding to the largest historical pumping, but that volume change did not exceed 1 percent. The negligible change in freshwater volume suggests that saltwater intrusion as of 2019 was limited at an islandwide scale but continues to occur in local areas of Queens and Nassau Counties, adversely affecting current water supplies and limiting future water supplies for affected communities. The regional groundwater model developed for this investigation is a tool that can be used to help determine the viability of current and future water supplies at a regional scale and can be used to support development of additional models at finer scale to support more focused assessments of groundwater sustainability.

New York

Examining 22 years of ambient seismic wavefield at Mount St. Helens

An increase in seismic activity precedes most volcanic eruptions. Whereas event-based forecasting approaches have been successful, some eruptions remain unanticipated, resulting in casualties and damage. Our study leverages the recent advancements in ambient field seismology. We explore features extracted from continuous ambient fields using traditional methods, for example, peak ground velocity, peak ground acceleration, root mean square, root median square, real-time seismic amplitude measurement, and novel methods (displacement seismic amplitude ratio and spectral width). In addition, we explore unsupervised learning of higher order wavelet features using scattering networks. We find that combining all the methods was necessary to disentangle the effects of seismic sources from structural changes at Mount St. Helens. Although the ambient wavefield-based approach does not yield additional or more significant precursory signals than event-based methods at Mount St. Helens, our study demonstrates that the ambient wavefield provides supplementary information, mainly about structural changes and complements traditional methods. The ambient seismic wavefield offers additional insights into long-lasting processes. We find enhanced wave attenuation correlating with geochemical measurements. We interpret this as ongoing structural changes, such as dome growth or the evolution of the volcanic conduit system. On annual and decadal timescales, we interpret seasonal seismic attenuation in the shallow subsurface as groundwater fluctuations, corroborated by observations at the nearby Spirit Lake level. This multimethod approach at Mount St. Helens sheds light on a volcanic system’s underlying dynamics and structure.

Washington

Assessing spatial variability of nutrients, phytoplankton, and related water-quality constituents in the California Sacramento–San Joaquin Delta at the landscape scale—2018 high resolution mapping surveys

Executive Summary This study examined the abundance and distribution of nutrients and phytoplankton in the tidal aquatic environments of the Sacramento–San Joaquin Delta (Delta) and Suisun Bay, comprising three spatial surveys conducted in May, July, and October of 2018 that used continuous underway high frequency sampling and measurements onboard a high-speed boat to characterize spatial variation across the extent of the Delta. The method used involves simultaneously collecting information about the concentration and spatial distribution of all major nutrient forms with analogous information about the major classes of phytoplankton and associated water-quality conditions. The results showed substantial variation across space and time, providing an unprecedented snapshot of the dynamic environmental processes that shape the ways nutrients interact with and affect aquatic habitats in the Delta. The purposes of this study were to improve our understanding of how hydrodynamics, landscape features, and aquatic primary productivity interact to drive nutrient cycling and transport in the Delta and to provide insights into the underlying processes most directly responsible for the conditions at the time of this study, and thus into the range of conditions that may be expected following the wide array of prospective future changes to the Delta. One major anticipated change at the time of this study was the planned upgrade to the Sacramento Regional Wastewater Treatment Plant, but the study also informs our understanding of potential effects from other changes to the Delta, such as those caused by other nutrient-management actions, flow actions, large-scale wetland restoration, drought, flood, levee failure, and changes to water management. Nutrient loading is the primary driver of nutrient concentrations in the Delta, but several other major drivers interact to shape their distribution and effects: geomorphology, hydrodynamics, landscape features, and aquatic productivity. Hydrodynamics affect timescales of transport and dilution of nutrient loads in the Delta. During transit through the system, channel geometry, tidal mixing, and water exports affect hydrodynamics in diverse ways that influence water-residence and transport times, thereby markedly affecting the range of times during which natural internal cycling can alter nutrient concentrations and forms. Channel geometry and location shape tidal energy and river currents into these observed dynamics. Interactions with Delta aquatic landscapes such as herbaceous tidal marsh, submerged aquatic vegetation, and large expanses of intertidal or subtidal sediments (all highly productive landscapes) exert demand on available nutrient supplies but can also simultaneously transform and generate nutrients. Finally, while phytoplankton require nutrients to sustain production and thus are a potential nutrient sink, the amount and form of nutrients also can influence the occurrence of harmful algal blooms (HABs) that adversely affect aquatic organisms as well as affect the occurrence of beneficial algal blooms that result in production of algae that are favorable for imperiled Delta pelagic aquatic food webs. The surveys revealed a complex mosaic of spatial variation, with nutrient concentrations varying from near zero to well above concentrations considered eutrophic; nutrient concentrations were more often related to the extent of hydrologic transport and mixing than to specific geographic locations or to specific landscape features. Similarly, the surveys identified phytoplankton abundance ranging from near detection to the level of large phytoplankton blooms, with large variation in phytoplankton community composition. Although the study occurred during a period of low bloom activity, phytoplankton productivity appeared to be the strongest potential sink for inorganic nutrients in the Delta, indicating that it is a larger control on nutrient concentrations and distribution than previously understood. Cycling and transformation within the water column only appeared to substantially lower total nutrient concentrations at the longest estimated transport timescales. Contrary to expectations, we did not observe substantial nutrient depletion near landscape-scale features such as open-water habitats, submerged aquatic vegetation beds, extensive wetlands, or exposed sediments, indicating that these habitat types did not act as major sinks for nutrients in the Delta during these surveys. These results indicated that nutrient reduction efforts may have the greatest effect on pelagic phytoplankton productivity in the more productive reaches of the Delta and estuary, but these effects are unlikely to be magnified by changes to nutrient loss within the Delta over conceivable changes in flow conditions, Delta water management actions, or large-scale wetland restoration activities. Nevertheless, local processes were shown to cause substantial loss, and thus integrating of nutrient effects with other indicators of aquatic habitat conditions will help inform planning future actions at specific sites. Finally, we note that the primary contribution of this study was intended to be the survey data themselves. Aside from the results highlighted in this report, the surveys are a benchmark against which future environmental change may be evaluated, including changes to nutrient management or water exports, drought, large-scale wetland restoration, and climate change. Further, although we highlight some of the main findings from the surveys in this report, the necessarily limited scope precludes examination of many topics for which these surveys may be highly informative. To facilitate the utility of these data to stakeholders, managers, and researchers, we have released the data online (Bergamaschi and others, 2020) and created an online data exploration portal ( https:​//ca.water​.usgs.gov/​bay-​delta/​2018-​delta-​wide-​mapping-​surveys.html ) where users may query the surveys in a variety of ways to test hypotheses, examine relationships, assess spatial trends, and download data. The data exploration portal is intended to be an immersive experience that allows users to gain greater understanding of the complex interactions that shape Delta aquatic environments. This report is intended as a companion to the portal, allowing the reader to challenge and further explore the highlighted findings. This study was a collaboration between the U.S. Geological Survey and the Delta Regional Monitoring Program, with additional funding provided from U.S. Geological Survey Cooperative Matching Funds Program.

California

Correction to A regime shift in sediment export from a coastal watershed during a record wet winter, California: Implications for landscape response to hydroclimatic extremes

In the referenced article, the authors would like to correct text in the first paragraph on page 2571, Figure 9 and its caption. The changes reflect an error made in the processing of the rainfall intensity-duration data used to compare storms to published debris flow triggering thresholds. The correctly processed data does not change the interpretations made in the paper but does correctly indicate that the investigated storms did not exceed the rainfall intensity – duration threshold of Cannon (1988) but did significantly exceed the debris flow triggering threshold of Wieczorek (1987).

Earth Surface Processes and Landforms

Quantitative mineral resource assessment of lithium pegmatite deposits in the northern Appalachian orogen, USA

Lithium demand is projected to increase more than 48 times by 2040 due to electric vehicle production and other energy storage needs. Most lithium production is outside of the USA, thereby increasing supply chain vulnerability. The combined end use importance and heightened supply risk of lithium make this lightest metallic element a critical commodity to the USA. To mitigate this supply risk, the US Geological Survey is actively assessing lithium deposits in the USA. Herein, we detail an assessment for lithium-mineralized pegmatites in the US northern Appalachian Mountains. Permissive tracts were generated by cross-referencing tectonic and geologic maps and mineral occurrence data with mappable criteria derived from generalized and region-specific lithium pegmatite ore deposit models; tracts were then ranked as having high, medium, or low permissibility. Available geophysical and geochemical data were found to be of minimal utility for this deposit type at the scale of the assessment. The number of undiscovered deposits were estimated and integrated into probabilistic simulations, which included an expanded and updated global grade and tonnage model of pegmatite-hosted lithium ore. The estimated total amount of undiscovered resources for the northern Appalachian Orogen has a median value of 1,410,000 metric tons of Li 2 O when considering moderate correlation across sub-regions. At a confidence level of 90%, a resource of at least 90,000 metric tons of Li 2 O remains undiscovered, and at a 10% confidence level, a resource of as much as 7,380,000 metric tons Li 2 O remains undiscovered. After applying an up-to-date economic filter to convert median contained lithium to recoverable material, a correlated total of 900,000 metric tons of Li 2 O may be economically extractable, equating to enough Li 2 O to provide the current annual US lithium supply deficit (presently obtained through net imports) for 127 years at 2025 rates of apparent consumption. This period of provision will inevitably shorten with projected increasing consumption rates, emphasizing that further research could be completed to better delineate regions of high lithium resource potential and support exploration and domestic production.

Connecticut, Delaware, Maine, Massachusetts, New H

Remote single-station seismic monitoring of the July–October 2022 earthquake swarm at Tau volcano, American Samoa

From July to October 2022, a non-eruptive volcanic earthquake swarm occurred within ~15 km of Taʻū Island, located in eastern American Samoa. Felt reports from local residents were the only available information about the swarm when it started, as American Samoa lacked a seismic monitoring network. We developed a consistent single-station catalog for the entire swarm, using seismic data from the nearest station IU.AFI, ~250 km away. We applied the EQTransformer deep-learning model (Mousavi et al., 2020), automatically picking Pn and Sn arrivals on IU.AFI continuous data. We retained only events with Sn-Pn times of 22.5–25 seconds, consistent with the expected locations based on felt reports, then detected smaller swarm events with subsequent template-matching. This single-station catalog characterized the swarm’s onset and escalation to peak activity before a multi-agency field response team installed a local seismic network in mid-August 2022. This permanent seismic network captured the swarm’s decline. EQTransformer identified short S-P times on the first two locally deployed seismometers, both Raspberry Shake sensors, to constrain the swarm’s distance from Taʻū Island. Modern seismological processing methods, combined with basic observations such as felt reports, can quickly contribute useful information during an earthquake response in a poorly monitored region.

American Somoa

Widespread anhydrite saturation in Laramide-age arc magmas of southwestern USA

Anhydrite is considered a rare mineral phase in magmas, with only ∼33 documented occurrences worldwide. However, anhydrite readily decomposes in the near-surface environment, making it difficult to recognize its former presence in rocks collected at or near Earth’s surface. In such samples, only small anhydrite inclusions fully shielded within other minerals can have survived. During a recent field trip to the southwestern USA, we sampled 17 Laramide-age (ca. 40−80 Ma) magma systems, most of which are associated with porphyry copper deposits. A systematic search for anhydrite inclusions preserved within apatite, amphibole, plagioclase, and quartz phenocrysts in ∼100 rock samples by optical microscopy and Raman spectroscopy revealed that each of these 17 magma systems was at least temporarily anhydrite-saturated. Also, most previously identified magmatic anhydrite-bearing intrusions are associated with porphyry copper deposits, and both intrusive and volcanic rocks containing magmatic anhydrite show high Sr/Y ratios. These observations suggest that anhydrite saturation and porphyry copper formation are linked via magma fractionation at high pressure. Compared to average arc magmas, anhydrite-bearing magmas are unusually oxidized and sulfur-rich and seem to also be unusually water-rich. Hence, our preferred interpretation is that magma generation and/or fractionation at high pressure promotes the formation of superhydrous and oxidized magmas, which in turn promotes high sulfur contents and ultimately the precipitation of anhydrite. The high mineralization potential of these magmas does not need to result from their high sulfur content but could be caused by other properties of high-pressure magmas.

Arizona, New Mexico

Onset of aftershocks: Constraints on the Rate-and-State model

Aftershock rates typically decay with time t after the mainshock according to the Omori–Utsu law, R (t)=K(c+t) −p ⁠ , with parameters K , c , and p . The rate‐and‐state (RS) model, which is currently the most popular physics‐based seismicity model, also predicts an Omori–Utsu decay with p = 1 and a c ‐value that depends on the size of the coseismic stress change. Because the mainshock‐induced stresses strongly vary in space, the c ‐value should vary accordingly. Short‐time aftershock incompleteness (STAI) in earthquake catalogs has prevented a detailed test of this prediction so far, but the newly developed a ‐positive method for reconstructing the true earthquake rate now allows its testing. Using previously published slip models, we calculate the coseismic stress changes for the six largest mainshocks in Southern California in recent decades and estimate the maximum shear as a scalar proxy of the coseismic stress tensor. Aftershock rates reconstructed for events in different stress ranges show that the rates follow a power law with p = 1 independent of stress with no clear sign of a c ‐value. The onset of the power‐law decay is abrupt and more delayed in areas with smaller stress changes. The observations do not necessarily contradict the RS model, as STAI limits the resolution for early aftershocks, and the RS model can reproduce the observations for specific Aσ values. However, the observations lead to strong constraints, namely Aσ <10 kPa and a power‐law decay of the background rate with distance to the fault, with exponent 2.7.

Seismological Research Letters

Deep groundwater total dissolved solids mapping in the Dakota Group, Williston Basin, USA

Growing concern about the quantity of available freshwater around the world has led to interest in surveying groundwater total dissolved solids (TDS) below water well depths. Deep TDS has not been systematically mapped, and there is much to learn about the distribution and controls on deeper groundwater. In sedimentary basins across the United States, groundwater resources often overlie hydrocarbon resources, providing an opportunity to use borehole geophysical data collected for hydrocarbons to characterize groundwater and pore space resources. This study adapts a recently developed subsurface geostatistical and geophysical modeling approach to continuously map groundwater TDS, porosity, and temperature in the Dakota Group of the Williston Basin—an undercharacterized regional aquifer system overlying deeper hydrocarbon reservoirs. Groundwater TDS in the Dakota Group ranges from approximately 4800 to 26,900 mg/L. TDS patterns are stratified with higher TDS in the lower and upper Dakota Group, and relatively lower TDS in the middle Dakota Group. The lower TDS in the middle zone may represent a preferential regional flow path for lower-TDS meteoric recharge from the west. The alternating pattern of TDS may also be evidence of higher-TDS inflows into the Dakota Group from underlying and potentially from overlying aquifers. Porosity is lower near the center of the Williston Basin and tends to be higher to the east, which may be related to grain size distributions. The new regional TDS and porosity modeling serves as a quantitative reference for water users and provides supporting evidence for hypotheses on Dakota Group recharge.

Montana, North Dakota, South Dakota

Hydrologic variability drives environmental and geospatial relationships in Smallmouth Bass (Micropterus dolomieu) distribution

Hydrologic variation is a primary driver of stream ecosystems. Changing hydrology can lead to assemblage shifts and alterations in suitable habitat for freshwater species. As climate change is predicted to alter flow patterns in addition to increasing water temperatures, insight into relationships between species occupancy, hydrology, and temperature is critical for understanding current and future distributions. We examined how hydrologic variability, temperature, and other environmental variables interact to influence Micropterus dolomieu (Smallmouth Bass) occurrence. We used Spatial Stream Network models, allowing for the incorporation of spatial autocorrelation along streams' unique dendritic network, to examine Smallmouth Bass occupancy across a range of hydrologic variation in the Ozark-Ouachita Interior Highlands, USA. Hydrologic variation was the main driver of Smallmouth Bass occurrence, with occurrence more likely in groundwater streams with low hydrologic variation and high flow permanence. For groundwater streams, occurrence was positively associated with summer stream temperature and negatively associated with annual stream temperature. As variation increased, more variables showed significant relationships with occurrence. Distance metrics were important for all models, however as hydrologic disturbance increased, flow connected distance played a lesser role and stream distance played a greater role. Hydrologic variability was the overarching determinant of Smallmouth Bass occurrence and strongly influenced the predictive importance of environmental variables and geospatial relationships. Greater hydrologic variability resulted in stronger statistical relationships between occurrence and environmental variables and an increased importance of system connectivity. As climate change alters hydrologic processes and streams become more variable, understanding and accounting for these shifting relationships is essential.

Arkansas, Kansas, Missouri, Oklahoma

Season and antecedent conditions impact concentration-discharge relationships for dissolved organic carbon and alkalinity in southeast Alaskan watershed

Fluvial export of dissolved carbon plays an important role in watershed-scale biogeochemistry. Predicted changes in climate are expected to impact watershed hydrologic regimes, and in turn, the sources and export of dissolved carbon from watersheds. Here, we utilize high resolution measurements of discharge and dissolved carbon concentration to examine how concentration-discharge (CQ) relationships vary seasonally and during high flow events over the main runoff season (May–October) in a temperate forested watershed in Southeast Alaska. Concentration-discharge relationships for dissolved organic carbon (DOC) and alkalinity demonstrated strong seasonal patterns, with more linear relationships in May and June versus other months. Changing power law model slopes ( b values; the exponent in a power law regression between runoff and carbon yields) indicated potentially shifting watershed sources (biogenic vs. geologic) and contrasting dominant flowpaths (shallow vs. deeper groundwater) for DOC and alkalinity over the sampling period. During the largest storm event of the study, DOC and alkalinity b values shifted from an overall pattern of transport (mean b = 1.58 values >1.0 indicate transport limitation) and source limitation (mean b = 0.48, values <1.0 indicate source limitation) to chemostatic (DOC, b = 0.99; alkalinity, b = 1.019). In June through August, patterns in hysteresis index suggest that CQ relationships were altered when storms followed in close succession to each other. Together, these findings indicate that seasonal and antecedent flow conditions play a role in dissolved carbon export from forested watersheds. Understanding these dynamics, particularly during winter months, will become increasingly important as changes to hydroclimate impact riverine carbon export.

Alaska

A framework for understanding the effects of subsurface agricultural drainage on downstream flows

Understanding controls on streamflow volume and magnitude is important to water resource management applications, such as critical water and transportation structure design and floodplain mapping. Changes in land use and agricultural practices, such as subsurface agricultural drainage, may be contributing to changes in streamflow characteristics. Subsurface agricultural drainage, also known as tile drainage, is the practice of installing drains in the subsurface of agricultural fields to improve productivity. Because of the complex interactions between subsurface drainage systems, precipitation, local soil conditions, and land management practices, it is difficult to determine how subsurface agricultural drainage affects downstream flow. Previously developed subsurface agricultural drainage conceptual models under dry, saturated, and winter conditions are summarized, and current literature on the effects of subsurface agricultural drainage on downstream flows, focusing on peak flow, non-event flow, and total flow to develop frameworks for discussing these systems is compiled. The effects that subsurface drainage has on hydrologic systems are expected to vary by site and are seasonally based on system design, soil type, moisture conditions, precipitation characteristics, and land conditions. Subsurface drainage can affect the magnitude of peak flow by converting surface runoff from a storm event to subsurface runoff. By increasing hydrologic connectivity of a catchment, subsurface drainage can increase non-event flow or the flow between two storm events, typically dependent on lateral flow through the subsurface and groundwater. Theoretically, by diverting water from groundwater recharge or by reducing water available for evapotranspiration, subsurface drainage may increase the total volume of flow. Precipitation changes may increase infiltration, excess overland flow, and flood risk regardless of the presence or absence of subsurface drainage.

Illinois, Iowa, Michigan, Minnesota, Missouri, Mon

Ungulate migrations of the Western United States, volume 6

This report, volume 6 in the “Ungulate Migrations of the Western United States” report series, showcases the migrations of 23 ungulate herds in the Western United States. The report series is produced by the Corridor Mapping Team (CMT). Led by the U.S. Geological Survey, the CMT is a collaboration among 11 State agencies, as well as regional and Federal partners, and an expanding number of Tribal wildlife agencies. The CMT was initiated in response to the U.S. Department of the Interior Secretarial Order 3362, which was signed in 2018 and provided Federal support to expand existing research efforts to study ungulate populations and conserve their migrations throughout the Western United States. Including this volume, the report series has detailed the migrations of 237 unique ungulate herds throughout the Western United States and continues to serve as a valuable resource to guide local and regional management, policy, and on-the-ground work necessary to maintain intact and functional ungulate migrations. This report highlights several guiding principles of the CMT that facilitate collaboration among the diverse set of partners and contribute to the program’s continued successes. Notably, raw global positioning system data are not shared among participating agencies and the U.S. Geological Survey, delineating migration corridors and seasonal ranges relies on empirical data, the CMT provides flexible approaches to participating State and Tribal partners, and regular CMT meetings create a framework for open communication among agency partners that supports transboundary mapping of migrations. The 237 ungulate migrations that have been included in the report series are an expanding inventory, which can help maintain ungulate migrations in perpetuity.

Arizona, California, Colorado, Idaho, Montana, Nev

Design, revisions, and considerations for continued use of a ground-water-flow model of the coastal plain aquifer system in Virginia

A digital numerical model of the ground-water-flow system in the Virginia Coastal Plain was constructed as part of the Regional Aquifer System Analysis program of the U.S. Geological Survey and subsequently revised based on reinterpretations of the hydrogeologic framework. The revised model has been incorporated by the Virginia Department of Environmental Quality as a means to evaluate the effects of existing and proposed ground-water withdrawals. The revised model, which is documented here, includes many design features of the original model. Principal modifications are (1) reassignment of some model layers to represent different aquifers, (2) replacement of applied recharge and the uppermost surface-water layer by constant-head cells to represent the unconfined aquifer, and (3) revision of the lateral extents and transmissivity and vertical leakance values assigned to model layers. Ground-water levels simulated by the revised model under steady-state conditions, using withdrawal rates representing the period 1978-80, generally are similar to the water levels simulated by the original model under transient conditions using the same withdrawal rates. Differences probably result largely from changes in transmissivity and vertical leakance values. T he revised model enables the continued evaluation of development of the large and complex aquifer system. Improved information on parts of some aquifers has been incorporated. Only large, regional-scale trends in ground-water water levels, flow directions, and flow rates are simulated, however, and not local trends and (or) short-term changes in water level and flow. Changing hydraulic stresses, knowledge of hydrogeologic conditions, and resource-management needs require periodic revision of the model to maintain its usefulness for the management of ground-water resources in the Virginia Coastal Plain.

Virginia

Integrated stratigraphic and geochemical analysis of organic-rich intervals of the Lewis Shale in the eastern Washakie Basin, Wyoming

Geological studies in the Cretaceous Western Interior Seaway (KWIS) in North America reveal highly variable sedimentological conditions on its western shore caused by rapidly changing sea level and detrital input during the seaway’s closure. Here we examine a 601-foot (183 meters) continuous core through the lower part of the Maastrichtian Lewis Shale in the eastern Washakie Basin, Wyoming, through integrating stratigraphic and geochemical analyses to better understand organic matter deposition and preservation during the final marine transgression within the seaway. The core penetrates eight organic-rich flooding intervals (F1-F8) and a regional condensed section, informally known as the Asquith marker. The lower portions of the core record sediment input from a southern source, likely the Sierra Madre/Park Ranges, while the upper part records sediment input from a northern source, likely the Granite Mountains. This provenance transition is supported by regional stratigraphic analysis and changes in bulk mineral and trace metal composition. The Asquith marker and early flooding surfaces are enriched in oil-prone, marine organic matter deposited under dysoxic to euxinic conditions, whereas younger flooding surfaces show increased terrigenous input and poorer preservation conditions. The Asquith marker is identified as a prime oil-prone source rock. Although younger flooding surfaces also exhibit favorable source-rock properties, their generative potential is reduced due to increased clastic and terrigenous organic matter deposition caused by regression. These results emphasize the importance of sediment source variability, organic matter preservation, and changing redox conditions to provide insight into the sediment provenance and petroleum potential of the Lewis Shale in the context of the final transgression within the KWIS.

Colorado, Wyoming

Annual NLCD (National Land Cover Database)—The next generation of land cover mapping

Introduction The widely used National Land Cover Database (NLCD) has long been the foundational land cover source for scientists, resource managers, and decision makers across the United States. In 2024, a reinvention as Annual NLCD added the key improvement of annual time steps to show decades of change at a higher frequency than the intervals of 2–3 years used in the legacy NLCD. Annual NLCD was derived primarily from the long Landsat satellite data record, and it includes data from other sources. The first release in 2024 of Annual NLCD provides Collection 1.0 of products encompassing land cover and land change from 1985 through 2023 for the conterminous United States (CONUS). The Annual NLCD Collection 1.0 consists of six operational products that map the unique characteristics of land cover. A map created from Annual NLCD shows 16 land cover classes for the CONUS in 2023.

conterminous United States

Component identification of solid biomass fuels using reflected light microscopy: Interlaboratory study 2

As nations transition toward sustainable energy systems , biomass has become a vital component of global energy portfolios. Derived from organic materials such as wood, agricultural residues, forestry byproducts, and organic waste, biomass is a renewable energy source with significant environmental and economic benefits. Responsible biomass energy production can improve waste management, reduce emissions of greenhouse gases, and mitigate environmental pollution. However, as the diversity of biomass-derived fuels increases, robust quality assessment methods are essential to ensure their efficiency, safety, and minimal environmental impact. Reflected light microscopy (RLM) is one such technique with the potential to complement conventional physico-chemical analyses by enabling a rapid identification of material constituents and impurities. To refine this methodology and evaluate the reproducibility of solid biomass component identification using RLM, an interlaboratory study (ILS) was conducted. The study involved the recognition of 58 components across 45 photomicrographs, with the participation of 65 scientists and students from 25 countries. The participants faced high difficulty identifying some of the marked components, and as a result, the percentage of correct answers ranged from 19.0 % to 98.3 %, with an average correct identification rate of 62.7 %. The most challenging aspects of the identification process included distinguishing between woody and non-woody (agro) biomass, accurately identifying petroleum-derived materials, and differentiating agro biomass from inorganic matter. The results suggest that while RLM is an important tool for characterizing solid biomass, further development of methodology guidelines and training are necessary to enhance its effectiveness. Future research should prioritize preparing detailed, image-rich, microscopic morphological descriptions of biomass fuel components, which could improve the accuracy and reliability of using RLM in biomass fuel characterization.

International Journal of Coal Geology

Assimilation of reduced carbon triggers platinum alloy saturation in mafic and ultramafic magmas

It is generally observed that magmatic sulfide ores have higher ratios of Pd/Pt than the mantle-like values of their parental magmas. This discrepancy has defied simple explanation because the partitioning behavior of both elements between sulfide and silicate liquids is very similar. Assimilation of sulfur- and carbon-rich country rocks by mafic and ultramafic magmas is considered a critical, if not essential, step in the formation of magmatic base metal sulfide deposits. Although there is general consensus that the assimilation of external sulfur and carbon promotes sulfide saturation, the effect of carbon assimilation on the solubilities of platinum-group elements in natural S-bearing silicate melt has been overlooked. In this study, we investigate the variations of platinum and palladium solubilities during assimilation of graphite and methane through thermodynamic modeling, in comparison with data from an array of highly distinctive magmatic sulfide ore systems representing ages from Archean to Paleozoic, melt compositions from komatiite to basalt, and magmatic settings including lavas, hypabyssal intrusions, plutonic continental arc roots, and plutonic layered intrusions, namely: Raglan, Norilsk-Talnakh, Lac des Iles, and the J-M Reef of the Stillwater Complex. We model assimilation-fractional crystallization processes to estimate the reduction of oxygen fugacity ( ⁠fO2⁠ ) of the melt due to incorporation of graphite and methane. The simulations show that although Pd remains highly soluble during the progressive assimilation of reduced carbon, Pt solubility decreases significantly as the silicate melt becomes increasingly reduced. With less than 8 % of sediment assimilation, Pt alloy may saturate and then deviate from sulfide-undersaturated silicate melts, concomitantly increasing the Pd/Pt value of the remaining melts of the Raglan and Norilsk-Talnakh systems. For the Lac des Iles and Stillwater systems, a higher extent of assimilation is needed to reach Pt saturation because of the relatively carbon-poor nature of the lower crustal rocks. The assimilation of methane volatiles is shown to be more effective than graphite assimilation, and it provides a pathway to Pt alloy fractionation in the absence of detectable amounts of bulk host-rock assimilation. High Pd/Pt values have been documented in many world-class magmatic sulfide deposits whose parental magmas have demonstrably experienced crustal contamination. Our model suggests that although anomalous Pd/Pt values may be explained by other mechanisms such as incongruent melting of preexisting sulfide or differences in the diffusivities of the metals within achieving equilibration, the assimilation of graphite or methane may play an important role in the global occurrence of magmatic sulfide ores with elevated Pd/Pt values.

Economic Geology